homeassistant 2025.7.2__py3-none-any.whl → 2025.7.4__py3-none-any.whl

homeassistant/components/homeassistant_yellow/translations/en-GB.json

@@ -14,6 +14,7 @@
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
             "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
+            "fw_install_failed": "{firmware_name} firmware failed to install, check Home Assistant logs for more information.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
@@ -29,6 +30,7 @@
         },
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
+            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
             "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
         },
@@ -38,23 +40,23 @@
             },
             "addon_menu": {
                 "menu_options": {
-                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multiprotocol support",
-                    "uninstall_addon": "Remove IEEE 802.15.4 radio multiprotocol support"
+                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multi-protocol support",
+                    "uninstall_addon": "Remove IEEE 802.15.4 radio multi-protocol support"
                 }
             },
             "addon_not_installed": {
                 "data": {
-                    "enable_multi_pan": "Enable multiprotocol support"
+                    "enable_multi_pan": "Enable multi-protocol support"
                 },
-                "description": "When multiprotocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multiprotocol firmware.\n\nNote: This is an experimental feature.",
-                "title": "Enable multiprotocol support on the IEEE 802.15.4 radio"
+                "description": "When multi-protocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multi-protocol firmware.\n\nNote: This is an experimental feature.",
+                "title": "Enable multi-protocol support on the IEEE 802.15.4 radio"
             },
             "change_channel": {
                 "data": {
                     "channel": "Channel"
                 },
                 "description": "Start a channel change for your Zigbee and Thread networks.\n\nNote: this is an advanced operation and can leave your Thread and Zigbee networks inoperable if the new channel is congested. Depending on existing network conditions, many of your devices may not migrate to the new channel and will require re-joining before they start working again. Use with caution.\n\nOnce you have selected **Submit**, the channel change starts quietly in the background and will finish after a few minutes.",
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "confirm_otbr": {
                 "description": "Your {model} is now an OpenThread Border Router and will show up in the Thread integration.",
@@ -83,7 +85,7 @@
                 "menu_options": {
                     "firmware_settings": "Switch between Zigbee or Thread firmware.",
                     "hardware_settings": "Configure hardware settings",
-                    "multipan_settings": "Configure IEEE 802.15.4 radio multiprotocol support"
+                    "multipan_settings": "Configure IEEE 802.15.4 radio multi-protocol support"
                 }
             },
             "notify_channel_change": {
@@ -115,7 +117,7 @@
                 "title": "Reboot required"
             },
             "reconfigure_addon": {
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "start_addon": {
                 "title": "The Silicon Labs Multiprotocol add-on is starting."
@@ -126,10 +128,10 @@
             },
             "uninstall_addon": {
                 "data": {
-                    "disable_multi_pan": "Disable multiprotocol support"
+                    "disable_multi_pan": "Disable multi-protocol support"
                 },
-                "description": "Disabling multiprotocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
-                "title": "Remove IEEE 802.15.4 radio multiprotocol support"
+                "description": "Disabling multi-protocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
+                "title": "Remove IEEE 802.15.4 radio multi-protocol support"
             }
         }
     }

homeassistant/components/homeassistant_yellow/translations/es.json

@@ -18,7 +18,7 @@
             "not_hassio": "Las opciones de hardware solo se pueden configurar en instalaciones de Home Assistant OS.",
             "not_hassio_thread": "El complemento OpenThread Border Router solo se puede instalar con Home Assistant OS. Si quieres utilizar {model} como Thread Border Router, por favor, actualiza el firmware manualmente mediante el [web flasher]({docs_web_flasher_url}) y configura OpenThread Border Router para que se comunique con \u00e9l.",
             "otbr_addon_already_running": "El complemento OpenThread Border Router ya se est\u00e1 ejecutando y no se puede volver a instalar.",
-            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento y vuelve a intentarlo.",
+            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento e int\u00e9ntalo de nuevo.",
             "read_hw_settings_error": "No se pudo leer la configuraci\u00f3n del hardware",
             "unsupported_firmware": "No se pudo determinar el firmware de la radio de tu {model}. Aseg\u00farate de que ninguna otra integraci\u00f3n o complemento est\u00e9 intentando comunicarse con el dispositivo.",
             "write_hw_settings_error": "No se pudo escribir la configuraci\u00f3n del hardware",

homeassistant/components/homeassistant_yellow/translations/ga.json

@@ -10,10 +10,49 @@
         "abort": {
             "fw_download_failed": "Theip ar \u00edosl\u00f3d\u00e1il an fhirmware {firmware_name} do do {model}. Cinntigh go bhfuil rochtain idirl\u00edn ag Home Assistant agus d\u00e9an iarracht eile.",
             "fw_install_failed": "Theip ar shuite\u00e1il an fhirmware {firmware_name}, seice\u00e1il loga\u00ed Home Assistant le haghaidh tuilleadh eolais.",
-            "unsupported_firmware": "N\u00edorbh fh\u00e9idir an fhirmchl\u00e1r raidi\u00f3 ar do {model} a chinneadh. D\u00e9an cinnte nach bhfuil aon chomhth\u00e1th\u00fa n\u00e1 breise\u00e1n eile ag iarraidh cumars\u00e1id a dh\u00e9anamh leis an ngl\u00e9as faoi l\u00e1thair."
+            "not_hassio_thread": "N\u00ed f\u00e9idir an breise\u00e1n OpenThread Border Router a shuite\u00e1il ach le Home Assistant OS. M\u00e1s mian leat an {model} a \u00fas\u00e1id mar r\u00f3daire teorann Thread, d\u00e9an an firmware a splancadh de l\u00e1imh ag baint \u00fas\u00e1ide as an [web flasher]({docs_web_flasher_url}) agus socraigh OpenThread Border Router chun cumars\u00e1id a dh\u00e9anamh leis.",
+            "otbr_addon_already_running": "T\u00e1 an breise\u00e1n OpenThread Border Router ag rith cheana f\u00e9in, n\u00ed f\u00e9idir \u00e9 a shuite\u00e1il ar\u00eds.",
+            "otbr_still_using_stick": "T\u00e1 an {model} seo in \u00fas\u00e1id ag an mbreise\u00e1n OpenThread Border Router. M\u00e1 \u00fas\u00e1ideann t\u00fa l\u00edonra Thread, d\u00e9an cinnte go bhfuil r\u00f3dair\u00ed teorann malartacha agat. D\u00edshuite\u00e1il an breise\u00e1n agus d\u00e9an iarracht ar\u00eds.",
+            "unsupported_firmware": "N\u00edorbh fh\u00e9idir an fhirmchl\u00e1r raidi\u00f3 ar do {model} a chinneadh. D\u00e9an cinnte nach bhfuil aon chomhth\u00e1th\u00fa n\u00e1 breise\u00e1n eile ag iarraidh cumars\u00e1id a dh\u00e9anamh leis an ngl\u00e9as faoi l\u00e1thair.",
+            "zha_still_using_stick": "T\u00e1 an {model} seo in \u00fas\u00e1id ag comhth\u00e1th\u00fa Uathoibri\u00fa Baile Zigbee. Aistrigh do l\u00edonra Zigbee chuig oiri\u00fant\u00f3ir eile n\u00f3 scrios an comhth\u00e1th\u00fa agus d\u00e9an iarracht ar\u00eds."
         },
         "progress": {
             "install_firmware": "Fan go dt\u00ed go suite\u00e1lfar firmware {firmware_name} ar do {model}, t\u00f3gfaidh s\u00e9 seo c\u00fapla n\u00f3im\u00e9ad. N\u00e1 d\u00e9an aon athruithe ar do chrua-earra\u00ed n\u00e1 ar do bhogearra\u00ed go dt\u00ed go mbeidh s\u00e9 seo cr\u00edochnaithe."
+        },
+        "step": {
+            "confirm_otbr": {
+                "description": "Is R\u00f3daire Teorann OpenThread \u00e9 do {model} anois agus beidh s\u00e9 le feice\u00e1il sa chomhth\u00e1th\u00fa Thread.",
+                "title": "Socr\u00fa R\u00f3daire Teorann OpenThread cr\u00edochnaithe"
+            },
+            "confirm_zigbee": {
+                "description": "Is comhordaitheoir Zigbee \u00e9 do {model} anois agus taispe\u00e1nfar \u00e9 mar a aims\u00edodh \u00e9 ag comhth\u00e1th\u00fa Uathoibri\u00fa Baile Zigbee.",
+                "title": "Socr\u00fa Zigbee cr\u00edochnaithe"
+            },
+            "install_otbr_addon": {
+                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) \u00e1 shuite\u00e1il.",
+                "title": "Ag suite\u00e1il breise\u00e1n OpenThread Border Router"
+            },
+            "main_menu": {
+                "menu_options": {
+                    "firmware_settings": "Athraigh idir firmware Zigbee n\u00f3 Thread."
+                }
+            },
+            "otbr_failed": {
+                "description": "N\u00edor \u00e9irigh le suite\u00e1il breise\u00e1n OpenThread Border Router. Cinntigh nach bhfuil aon bhogearra\u00ed eile ag iarraidh cumars\u00e1id a dh\u00e9anamh leis an {model}, go bhfuil rochtain agat ar an Idirl\u00edon agus gur f\u00e9idir leat breise\u00e1in eile a shuite\u00e1il, agus d\u00e9an iarracht ar\u00eds. Seice\u00e1il loga\u00ed an Mhaoirseora m\u00e1 leanann an fhadhb.",
+                "title": "Theip ar R\u00f3daire Teorann OpenThread a bhun\u00fa"
+            },
+            "pick_firmware": {
+                "description": "Tosa\u00edmis le do {model} a chur ar bun. Ar mhaith leat \u00e9 a \u00fas\u00e1id chun l\u00edonra Zigbee n\u00f3 Thread a chur ar bun?",
+                "menu_options": {
+                    "pick_firmware_thread": "Sn\u00e1ithe",
+                    "pick_firmware_zigbee": "Zigbee"
+                },
+                "title": "Roghnaigh do dochtearra\u00ed"
+            },
+            "start_otbr_addon": {
+                "description": "T\u00e1 an breise\u00e1n OpenThread Border Router (OTBR) ag tos\u00fa anois.",
+                "title": "Ag tos\u00fa breise\u00e1n OpenThread Border Router"
+            }
         }
     }
 }

homeassistant/components/homee/translations/ca.json

@@ -25,6 +25,13 @@
         }
     },
     "entity": {
+        "binary_sensor": {
+            "load_alarm": {
+                "state": {
+                    "off": "Normal"
+                }
+            }
+        },
         "select": {
             "repeater_mode": {
                 "name": "Mode repetidor",

homeassistant/components/homee/translations/he.json

@@ -63,6 +63,8 @@
         "select": {
             "repeater_mode": {
                 "state": {
+                    "level1": "\u05e8\u05de\u05d4 1",
+                    "level2": "\u05e8\u05de\u05d4 2",
                     "off": "\u05db\u05d1\u05d5\u05d9"
                 }
             }

homeassistant/components/homee/translations/it.json

@@ -95,7 +95,7 @@
                 "state": {
                     "level1": "Livello 1",
                     "level2": "Livello 2",
-                    "off": "Off"
+                    "off": "Spento"
                 }
             }
         },

homeassistant/components/homee/translations/sv.json

@@ -15,6 +15,9 @@
                 "data": {
                     "host": "V\u00e4rd"
                 },
+                "data_description": {
+                    "host": "IP-adressen till din Homee."
+                },
                 "description": "Konfigurera om IP-adressen f\u00f6r din homee.",
                 "title": "Konfigurera om homee {name}"
             },
@@ -169,7 +172,16 @@
                 }
             },
             "button_state_instance": {
-                "name": "V\u00e4xla {instance}"
+                "name": "V\u00e4xla {instance}",
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "lower": "Nedre knapp",
+                            "released": "Sl\u00e4ppt",
+                            "upper": "\u00d6vre knapp"
+                        }
+                    }
+                }
             },
             "up_down_remote": {
                 "name": "Upp/ner fj\u00e4rrkontroll",
@@ -181,6 +193,7 @@
                             "c_button": "C-knapp",
                             "down": "Ner",
                             "down_long": "Ner (l\u00e5ngt tryck)",
+                            "release": "Sl\u00e4ppt",
                             "stop": "Stopp",
                             "stop_long": "Stopp (l\u00e5ngt tryck)",
                             "up": "Upp",

homeassistant/components/homematicip_cloud/hap.py

@@ -113,9 +113,7 @@ class HomematicipHAP:
 
         self._ws_close_requested = False
         self._ws_connection_closed = asyncio.Event()
-        self._retry_task: asyncio.Task | None = None
-        self._tries = 0
-        self._accesspoint_connected = True
+        self._get_state_task: asyncio.Task | None = None
         self.hmip_device_by_entity_id: dict[str, Any] = {}
         self.reset_connection_listener: Callable | None = None
 
@@ -161,17 +159,8 @@ class HomematicipHAP:
         """
         if not self.home.connected:
             _LOGGER.error("HMIP access point has lost connection with the cloud")
-            self._accesspoint_connected = False
+            self._ws_connection_closed.set()
             self.set_all_to_unavailable()
-        elif not self._accesspoint_connected:
-            # Now the HOME_CHANGED event has fired indicating the access
-            # point has reconnected to the cloud again.
-            # Explicitly getting an update as entity states might have
-            # changed during access point disconnect."""
-
-            job = self.hass.async_create_task(self.get_state())
-            job.add_done_callback(self.get_state_finished)
-            self._accesspoint_connected = True
 
     @callback
     def async_create_entity(self, *args, **kwargs) -> None:
@@ -185,20 +174,43 @@ class HomematicipHAP:
             await asyncio.sleep(30)
         await self.hass.config_entries.async_reload(self.config_entry.entry_id)
 
+    async def _try_get_state(self) -> None:
+        """Call get_state in a loop until no error occurs, using exponential backoff on error."""
+
+        # Wait until WebSocket connection is established.
+        while not self.home.websocket_is_connected():
+            await asyncio.sleep(2)
+
+        delay = 8
+        max_delay = 1500
+        while True:
+            try:
+                await self.get_state()
+                break
+            except HmipConnectionError as err:
+                _LOGGER.warning(
+                    "Get_state failed, retrying in %s seconds: %s", delay, err
+                )
+                await asyncio.sleep(delay)
+                delay = min(delay * 2, max_delay)
+
     async def get_state(self) -> None:
         """Update HMIP state and tell Home Assistant."""
         await self.home.get_current_state_async()
         self.update_all()
 
     def get_state_finished(self, future) -> None:
-        """Execute when get_state coroutine has finished."""
+        """Execute when try_get_state coroutine has finished."""
         try:
             future.result()
-        except HmipConnectionError:
-            # Somehow connection could not recover. Will disconnect and
-            # so reconnect loop is taking over.
-            _LOGGER.error("Updating state after HMIP access point reconnect failed")
-            self.hass.async_create_task(self.home.disable_events())
+        except Exception as err:  # noqa: BLE001
+            _LOGGER.error(
+                "Error updating state after HMIP access point reconnect: %s", err
+            )
+        else:
+            _LOGGER.info(
+                "Updating state after HMIP access point reconnect finished successfully",
+            )
 
     def set_all_to_unavailable(self) -> None:
         """Set all devices to unavailable and tell Home Assistant."""
@@ -222,8 +234,8 @@ class HomematicipHAP:
     async def async_reset(self) -> bool:
         """Close the websocket connection."""
         self._ws_close_requested = True
-        if self._retry_task is not None:
-            self._retry_task.cancel()
+        if self._get_state_task is not None:
+            self._get_state_task.cancel()
         await self.home.disable_events_async()
         _LOGGER.debug("Closed connection to HomematicIP cloud server")
         await self.hass.config_entries.async_unload_platforms(
@@ -247,7 +259,9 @@ class HomematicipHAP:
         """Handle websocket connected."""
         _LOGGER.info("Websocket connection to HomematicIP Cloud established")
         if self._ws_connection_closed.is_set():
-            await self.get_state()
+            self._get_state_task = self.hass.async_create_task(self._try_get_state())
+            self._get_state_task.add_done_callback(self.get_state_finished)
+
             self._ws_connection_closed.clear()
 
     async def ws_disconnected_handler(self) -> None:
@@ -256,11 +270,12 @@ class HomematicipHAP:
         self._ws_connection_closed.set()
 
     async def ws_reconnected_handler(self, reason: str) -> None:
-        """Handle websocket reconnection."""
+        """Handle websocket reconnection. Is called when Websocket tries to reconnect."""
         _LOGGER.info(
-            "Websocket connection to HomematicIP Cloud re-established due to reason: %s",
+            "Websocket connection to HomematicIP Cloud trying to reconnect due to reason: %s",
             reason,
         )
+
         self._ws_connection_closed.set()
 
     async def get_hap(

homeassistant/components/homematicip_cloud/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/homematicip_cloud",
   "iot_class": "cloud_push",
   "loggers": ["homematicip"],
-  "requirements": ["homematicip==2.0.6"]
+  "requirements": ["homematicip==2.0.7"]
 }

homeassistant/components/homematicip_cloud/translations/en-GB.json

@@ -34,29 +34,29 @@
     },
     "services": {
         "activate_eco_mode_with_duration": {
-            "description": "Activates the eco mode for a specified duration.",
+            "description": "Activates the eco-mode for a specified duration.",
             "fields": {
                 "accesspoint_id": {
                     "description": "The ID of the Homematic IP access point.",
                     "name": "Access point ID"
                 },
                 "duration": {
-                    "description": "The duration of eco mode in minutes.",
+                    "description": "The duration of eco-mode in minutes.",
                     "name": "Duration"
                 }
             },
-            "name": "Activate eco mode with duration"
+            "name": "Activate eco-mode with duration"
         },
         "activate_eco_mode_with_period": {
-            "description": "Activates the eco mode until a given time.",
+            "description": "Activates the eco-mode until a given time.",
             "fields": {
                 "accesspoint_id": {
                     "description": "The ID of the Homematic IP access point.",
                     "name": "Access point ID"
                 },
                 "endtime": {
-                    "description": "The time when the eco mode should automatically be disabled.",
-                    "name": "Endtime"
+                    "description": "The time when the eco-mode should automatically be disabled.",
+                    "name": "End-time"
                 }
             },
             "name": "Activate eco mode with period"
@@ -70,7 +70,7 @@
                 },
                 "endtime": {
                     "description": "The time when the holiday mode should automatically be disabled.",
-                    "name": "Endtime"
+                    "name": "End-time"
                 },
                 "temperature": {
                     "description": "The set temperature during the holiday mode.",

homeassistant/components/homematicip_cloud/translations/ga.json

@@ -5,5 +5,22 @@
                 "description": "M\u00e1s mian leat **Homematic IP HCU1** a chl\u00e1r\u00fa, br\u00faigh an cnaipe ar bharr an fheiste sula leanann t\u00fa ar aghaidh.\n\nN\u00ed m\u00f3r an pr\u00f3iseas cl\u00e1r\u00fach\u00e1in a chr\u00edochn\u00fa laistigh de 5 n\u00f3im\u00e9ad."
             }
         }
+    },
+    "exceptions": {
+        "access_point_not_found": {
+            "message": "N\u00edor aims\u00edodh aon phointe rochtana comhoiri\u00fanach don ID pointe rochtana {id}"
+        }
+    },
+    "services": {
+        "set_home_cooling_mode": {
+            "description": "Socra\u00edonn s\u00e9 an modh t\u00e9imh/fuaraithe don teach ar fad",
+            "fields": {
+                "cooling": {
+                    "description": "Cumasaigh don mhodh fuaraithe, d\u00edchumasaigh don mhodh t\u00e9imh",
+                    "name": "Fuar\u00fa"
+                }
+            },
+            "name": "Socraigh m\u00f3d fuaraithe t\u00ed"
+        }
     }
 }

homeassistant/components/homematicip_cloud/translations/pt.json

@@ -90,7 +90,7 @@
             "name": "Desativar o modo eco"
         },
         "deactivate_vacation": {
-            "description": "Desactiva imediatamente o modo de f\u00e9rias.",
+            "description": "Desativa imediatamente o modo de f\u00e9rias.",
             "fields": {
                 "accesspoint_id": {
                     "description": "O ID do ponto de acesso IP Homematic.",

homeassistant/components/homewizard/translations/en-GB.json

@@ -59,6 +59,16 @@
                 "name": "Status light brightness"
             }
         },
+        "select": {
+            "battery_group_mode": {
+                "name": "Battery group mode",
+                "state": {
+                    "standby": "Standby",
+                    "to_full": "Manual charge mode",
+                    "zero": "Zero mode"
+                }
+            }
+        },
         "sensor": {
             "active_apparent_power_phase_va": {
                 "name": "Apparent power phase {phase}"
@@ -158,6 +168,9 @@
         "api_disabled": {
             "message": "The local API is disabled."
         },
+        "api_unauthorized": {
+            "message": "The local API is unauthorized. Restore API access by following the instructions in the repair issue."
+        },
         "communication_error": {
             "message": "An error occurred while communicating with your HomeWizard Energy device"
         }

homeassistant/components/homewizard/translations/ru.json

@@ -18,6 +18,7 @@
         },
         "step": {
             "authorize": {
+                "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0430 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0435 HomeWizard Energy \u0438 \u0443\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0439\u0442\u0435 \u0435\u0435 \u0432 \u0442\u0435\u0447\u0435\u043d\u0438\u0435 \u0434\u0432\u0443\u0445 \u0441\u0435\u043a\u0443\u043d\u0434, \u0437\u0430\u0442\u0435\u043c \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0438\u0436\u0435.",
                 "title": "\u0410\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u0442\u044c"
             },
             "discovery_confirm": {
@@ -25,7 +26,7 @@
                 "title": "\u041f\u043e\u0434\u0442\u0432\u0435\u0440\u0436\u0434\u0435\u043d\u0438\u0435"
             },
             "reauth_confirm_update_token": {
-                "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0430 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0435 HomeWizard Energy, \u0437\u0430\u0442\u0435\u043c \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0438\u0436\u0435.",
+                "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0430 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0435 HomeWizard Energy \u0438 \u0443\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0439\u0442\u0435 \u0435\u0435 \u0432 \u0442\u0435\u0447\u0435\u043d\u0438\u0435 \u0434\u0432\u0443\u0445 \u0441\u0435\u043a\u0443\u043d\u0434, \u0437\u0430\u0442\u0435\u043c \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0438\u0436\u0435.",
                 "title": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f"
             },
             "reauth_enable_api": {
@@ -169,7 +170,7 @@
                 },
                 "step": {
                     "authorize": {
-                        "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0430 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0435 HomeWizard Energy, \u0437\u0430\u0442\u0435\u043c \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0438\u0436\u0435.",
+                        "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0430 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0435 HomeWizard Energy \u0438 \u0443\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0439\u0442\u0435 \u0435\u0435 \u0432 \u0442\u0435\u0447\u0435\u043d\u0438\u0435 \u0434\u0432\u0443\u0445 \u0441\u0435\u043a\u0443\u043d\u0434, \u0437\u0430\u0442\u0435\u043c \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u043a\u043d\u043e\u043f\u043a\u0443 \u043d\u0438\u0436\u0435.",
                         "title": "\u0410\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u0442\u044c"
                     },
                     "confirm": {

homeassistant/components/html5/translations/en-GB.json

@@ -28,6 +28,7 @@
     },
     "services": {
         "dismiss": {
+            "description": "Dismisses an HTML5 notification.",
             "fields": {
                 "data": {
                     "description": "Extended information of notification. Supports tag.",

homeassistant/components/html5/translations/ga.json

@@ -0,0 +1,28 @@
+{
+    "config": {
+        "abort": {
+            "invalid_config": "Cumra\u00edocht neamhbhail\u00ed"
+        },
+        "error": {
+            "invalid_prv_key": "Eochair phr\u00edobh\u00e1ideach neamhbhail\u00ed",
+            "unknown": "Earr\u00e1id anaithnid"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "vapid_prv_key": "Eochair phr\u00edobh\u00e1ideach VALID"
+                },
+                "data_description": {
+                    "vapid_email": "Beidh an seoladh teagmh\u00e1la seo san \u00e1ireamh i meiteashonra\u00ed gach f\u00f3gra.",
+                    "vapid_prv_key": "Mura sonra\u00edtear \u00e9, ginfear ceann go huathoibr\u00edoch."
+                }
+            }
+        }
+    },
+    "issues": {
+        "deprecated_yaml_import_issue": {
+            "description": "T\u00e1 cumr\u00fa f\u00f3gra br\u00fa HTML5 ag baint \u00fas\u00e1ide as YAML imithe i l\u00e9ig. Rinneadh iarracht d\u2019fhoirm\u00edocht at\u00e1 ann cheana a allmhairi\u00fa go huathoibr\u00edoch, ach theip air.\n\nBain an chumra\u00edocht f\u00f3gra br\u00fa HTML5 YAML as do chomhad configuration.yaml agus athchumraigh f\u00f3gra br\u00fa HTML5 ar\u00eds de l\u00e1imh.",
+            "title": "Theip ar allmhairi\u00fa cumra\u00edochta HTML5 YAML"
+        }
+    }
+}

homeassistant/components/html5/translations/pt.json

@@ -28,6 +28,7 @@
     },
     "services": {
         "dismiss": {
+            "description": "Ignora uma notifica\u00e7\u00e3o HTML5.",
             "fields": {
                 "data": {
                     "description": "Informa\u00e7\u00e3o alargada da notifica\u00e7\u00e3o. Suporta etiquetas.",

homeassistant/components/huawei_lte/translations/ga.json

@@ -31,6 +31,27 @@
             "nei_cellid": {
                 "name": "Aitheantas cille comharsanachta"
             },
+            "nrrank": {
+                "name": "Rang 5G"
+            },
+            "nrrsrp": {
+                "name": "5G RSRP"
+            },
+            "nrrsrq": {
+                "name": "5G RSRQ"
+            },
+            "nrsinr": {
+                "name": "5G SINR"
+            },
+            "nrtxpower": {
+                "name": "Cumhacht tarchuir 5G"
+            },
+            "nrulbandwidth": {
+                "name": "Bandaleithead suasnasc 5G"
+            },
+            "nrulmcs": {
+                "name": "MCS nasc suas 5G"
+            },
             "rxlev": {
                 "name": "Leibh\u00e9al comhartha faighte"
             },

homeassistant/components/hue/translations/el.json

@@ -193,9 +193,11 @@
                     "name": "\u0394\u03c5\u03bd\u03b1\u03bc\u03b9\u03ba\u03cc"
                 },
                 "group_name": {
+                    "description": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c4\u03b7\u03c2 \u03bf\u03bc\u03ac\u03b4\u03b1\u03c2/\u03c4\u03bf\u03c5 \u03b4\u03c9\u03bc\u03b1\u03c4\u03af\u03bf\u03c5 Hue \u03b1\u03c0\u03cc \u03c4\u03b7\u03bd \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae Hue.",
                     "name": "\u039f\u03bc\u03ac\u03b4\u03b1"
                 },
                 "scene_name": {
+                    "description": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c4\u03b7\u03c2 \u03c3\u03ba\u03b7\u03bd\u03ae\u03c2 Hue \u03b1\u03c0\u03cc \u03c4\u03b7\u03bd \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae Hue.",
                     "name": "\u03a3\u03ba\u03b7\u03bd\u03ae"
                 }
             },

homeassistant/components/humidifier/translations/ga.json

@@ -1,4 +1,13 @@
 {
+    "device_automation": {
+        "extra_fields": {
+            "above": "Thuas",
+            "below": "Th\u00edos",
+            "for": "Fad",
+            "humidity": "Taise",
+            "mode": "M\u00f3d"
+        }
+    },
     "exceptions": {
         "humidity_out_of_range": {
             "message": "N\u00edl an taise a chuirtear ar f\u00e1il {humidity} bail\u00ed. Is \u00e9 {min_humidity} go {max_humidity} an raon glactha."

homeassistant/components/humidifier/translations/it.json

@@ -28,8 +28,8 @@
         "_": {
             "name": "Umidificatore",
             "state": {
-                "off": "Off",
-                "on": "Acceso"
+                "off": "Spento",
+                "on": "On"
             },
             "state_attributes": {
                 "action": {
@@ -38,7 +38,7 @@
                         "drying": "Deumidificante",
                         "humidifying": "Umidificante",
                         "idle": "Inattivo",
-                        "off": "Off"
+                        "off": "Spento"
                     }
                 },
                 "available_modes": {

homeassistant/components/husqvarna_automower/translations/el.json

@@ -36,6 +36,7 @@
                 "title": "\u0395\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae \u03bc\u03b5\u03b8\u03cc\u03b4\u03bf\u03c5 \u03b5\u03bb\u03ad\u03b3\u03c7\u03bf\u03c5 \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2"
             },
             "reauth_confirm": {
+                "description": "\u0397 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03c4\u03bf\u03c5 Husqvarna Automower \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03c0\u03c1\u03b1\u03b3\u03bc\u03b1\u03c4\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03b5\u03b9 \u03b5\u03ba \u03bd\u03ad\u03bf\u03c5 \u03ad\u03bb\u03b5\u03b3\u03c7\u03bf \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03c4\u03bf\u03c5 \u03bb\u03bf\u03b3\u03b1\u03c1\u03b9\u03b1\u03c3\u03bc\u03bf\u03cd \u03c3\u03b1\u03c2",
                 "title": "\u039f \u03ad\u03bb\u03b5\u03b3\u03c7\u03bf\u03c2 \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03bf {name} \u03ad\u03bb\u03b7\u03be\u03b5"
             }
         }