homeassistant 2025.11.2__py3-none-any.whl → 2025.12.0__py3-none-any.whl

homeassistant/components/brother/translations/ga.json

@@ -199,8 +199,19 @@
         "cannot_connect": {
             "message": "Tharla earr\u00e1id agus ceangal \u00e1 dh\u00e9anamh leis an print\u00e9ir {device}: {error}"
         },
+        "serial_mismatch": {
+            "message": "N\u00ed hionann uimhir sraitheach {device} agus an ceann at\u00e1 sa chumra\u00edocht. Is f\u00e9idir gur mhalartaigh an d\u00e1 phrint\u00e9ir Brother seolta\u00ed IP. Athch\u00f3irigh an chumra\u00edocht seoladh IP roimhe seo n\u00f3 athchumraigh na gl\u00e9asanna le Home Assistant."
+        },
         "update_error": {
             "message": "Tharla earr\u00e1id agus sonra\u00ed \u00e1 n-aisghabh\u00e1il \u00f3n print\u00e9ir {device}: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "d\u00fach",
+                "laser": "l\u00e9asar"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/it.json

@@ -2,7 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
-            "reconfigure_successful": "La riconfigurazione \u00e8 stata completata con successo",
+            "reconfigure_successful": "La riconfigurazione \u00e8 avvenuta con successo",
             "unsupported_model": "Questo modello di stampante non \u00e8 supportato."
         },
         "error": {
@@ -193,5 +193,18 @@
                 "name": "Toner giallo rimanente"
             }
         }
+    },
+    "exceptions": {
+        "serial_mismatch": {
+            "message": "Il numero di serie per {device} non corrisponde a quello nella configurazione. \u00c8 possibile che le due stampanti Brother si siano scambiate gli indirizzi IP. Ripristina la configurazione precedente dell'indirizzo IP o riconfigura i dispositivi con Home Assistant."
+        }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "inchiostro",
+                "laser": "laser"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/lt.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "Jungiantis prie spausdintuvo {device} \u012fvyko klaida: {error}"
         },
+        "serial_mismatch": {
+            "message": "{device} serijos numeris nesutampa su nurodytu konfig\u016bracijoje. Gali b\u016bti, kad du Brother spausdintuvai sukeit\u0117 IP adresus. Atkurkite ankstesn\u0119 IP adreso konfig\u016bracij\u0105 arba i\u0161 naujo sukonfig\u016bruokite \u012frenginius naudodami Home Assistant."
+        },
         "update_error": {
             "message": "Gaunant duomenis i\u0161 {device} spausdintuvo \u012fvyko klaida: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "ra\u0161alas",
+                "laser": "lazeris"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/pl.json

@@ -173,8 +173,19 @@
         "cannot_connect": {
             "message": "Wyst\u0105pi\u0142 b\u0142\u0105d podczas \u0142\u0105czenia si\u0119 z drukark\u0105 {device}: {error}"
         },
+        "serial_mismatch": {
+            "message": "Numer seryjny {device} nie zgadza si\u0119 z tym zapisanym w konfiguracji. Mo\u017cliwe, \u017ce dwie drukarki Brother zamieni\u0142y si\u0119 adresami IP. Przywr\u00f3\u0107 poprzedni\u0105 konfiguracj\u0119 adres\u00f3w IP lub skonfiguruj urz\u0105dzenia ponownie z Home Assistantem."
+        },
         "update_error": {
             "message": "Wyst\u0105pi\u0142 b\u0142\u0105d podczas pobierania danych z drukarki {device}: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "atramentowa",
+                "laser": "laserowa"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/pt.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "Ocorreu um erro durante a liga\u00e7\u00e3o \u00e0 impressora {device}: {error}"
         },
+        "serial_mismatch": {
+            "message": "O n\u00famero de s\u00e9rie de {device} n\u00e3o corresponde ao da configura\u00e7\u00e3o. \u00c9 poss\u00edvel que as duas impressoras Brother tenham trocado de endere\u00e7o IP. Restaure a configura\u00e7\u00e3o anterior do endere\u00e7o IP ou reconfigure os dispositivos com o Home Assistant."
+        },
         "update_error": {
             "message": "Ocorreu um erro durante a recupera\u00e7\u00e3o de dados da impressora {device}: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "tinta",
+                "laser": "laser"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/sk.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "Pri prip\u00e1jan\u00ed k tla\u010diarni {device} do\u0161lo k chybe: {error}"
         },
+        "serial_mismatch": {
+            "message": "S\u00e9riov\u00e9 \u010d\u00edslo pre {device} sa nezhoduje s \u010d\u00edslom v konfigur\u00e1cii. Je mo\u017en\u00e9, \u017ee si obe tla\u010diarne Brother vymenili IP adresy. Obnovte predch\u00e1dzaj\u00facu konfigur\u00e1ciu IP adries alebo zariadenia znovu nakonfigurujte pomocou programu Home Assistant."
+        },
         "update_error": {
             "message": "Pri na\u010d\u00edtavan\u00ed \u00fadajov z tla\u010diarne {device} do\u0161lo k chybe: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "atrament",
+                "laser": "laser"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/sr-Latn.json

@@ -3,5 +3,10 @@
         "abort": {
             "reconfigure_successful": "Uspe\u0161no ponovo konfigurisano"
         }
+    },
+    "exceptions": {
+        "serial_mismatch": {
+            "message": "Serijski broj za {device} ne odgovara onom u konfiguraciji. Mogu\u0107e je da su dva Brother \u0161tampa\u010da zamenila IP adrese. Vratite prethodnu konfiguraciju IP adrese ili ponovo konfiguri\u0161ite ure\u0111aje u Home Assistant\u2011u."
+        }
     }
 }

homeassistant/components/brother/translations/sv.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "Ett fel uppstod vid anslutning till {device}-skrivaren: {error}"
         },
+        "serial_mismatch": {
+            "message": "Serienumret f\u00f6r {device} st\u00e4mmer inte \u00f6verens med det som finns i konfigurationen. Det \u00e4r m\u00f6jligt att de tv\u00e5 Brother-skrivarna har bytt IP-adresser. \u00c5terst\u00e4ll den tidigare IP-adresskonfigurationen eller konfigurera om enheterna med Home Assistant."
+        },
         "update_error": {
             "message": "Ett fel uppstod n\u00e4r data h\u00e4mtades fr\u00e5n {device}-skrivaren: {error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "bl\u00e4ck",
+                "laser": "laser"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/tr.json

@@ -20,18 +20,61 @@
                 "data_description": {
                     "host": "Kontrol edilecek Brother yaz\u0131c\u0131n\u0131n ana bilgisayar ad\u0131 veya IP adresi."
                 },
-                "description": "{printer_name} i\u00e7in yap\u0131land\u0131rmay\u0131 g\u00fcncelleyin."
+                "description": "{printer_name} i\u00e7in yap\u0131land\u0131rmay\u0131 g\u00fcncelleyin.",
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "community": "SNMP Toplulu\u011fu",
+                            "port": "Port"
+                        },
+                        "data_description": {
+                            "community": "Cihazlar\u0131n birbirleriyle ileti\u015fim kurmas\u0131n\u0131 sa\u011flayacak basit bir \u015fifre.",
+                            "port": "Brother yaz\u0131c\u0131n\u0131n SNMP ba\u011flant\u0131 noktas\u0131."
+                        },
+                        "name": "Geli\u015fmi\u015f ayarlar"
+                    }
+                }
             },
             "user": {
                 "data": {
                     "host": "Sunucu"
                 },
                 "data_description": {
-                    "host": "Kontrol edilecek Brother yaz\u0131c\u0131n\u0131n ana bilgisayar ad\u0131 veya IP adresi."
+                    "host": "Kontrol edilecek Brother yaz\u0131c\u0131n\u0131n ana bilgisayar ad\u0131 veya IP adresi.",
+                    "type": "Brother yaz\u0131c\u0131n\u0131n t\u00fcr\u00fc."
+                },
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "community": "SNMP Toplulu\u011fu",
+                            "port": "Port"
+                        },
+                        "data_description": {
+                            "community": "Cihazlar\u0131n birbirleriyle ileti\u015fim kurmas\u0131n\u0131 sa\u011flayacak basit bir \u015fifre.",
+                            "port": "Brother yaz\u0131c\u0131n\u0131n SNMP ba\u011flant\u0131 noktas\u0131."
+                        },
+                        "name": "Geli\u015fmi\u015f ayarlar"
+                    }
                 }
             },
             "zeroconf_confirm": {
+                "data_description": {
+                    "type": "Brother yaz\u0131c\u0131n\u0131n t\u00fcr\u00fc."
+                },
                 "description": "Seri numaras\u0131 ` {serial_number} ` olan {model} yaz\u0131c\u0131y\u0131 Home Assistant'a eklemek istiyor musunuz?",
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "community": "SNMP Toplulu\u011fu",
+                            "port": "Port"
+                        },
+                        "data_description": {
+                            "community": "Cihazlar\u0131n birbirleriyle ileti\u015fim kurmas\u0131n\u0131 sa\u011flayacak basit bir \u015fifre.",
+                            "port": "Brother yaz\u0131c\u0131n\u0131n SNMP ba\u011flant\u0131 noktas\u0131."
+                        },
+                        "name": "Geli\u015fmi\u015f ayarlar"
+                    }
+                },
                 "title": "Ke\u015ffedilen Brother Yaz\u0131c\u0131"
             }
         }
@@ -155,5 +198,18 @@
                 "name": "Kalan sar\u0131 toner"
             }
         }
+    },
+    "exceptions": {
+        "serial_mismatch": {
+            "message": "Seri numaras\u0131 {device} Yap\u0131land\u0131rmadakiyle e\u015fle\u015fmiyor. \u0130ki Brother yaz\u0131c\u0131n\u0131n IP adresleri de\u011fi\u015fmi\u015f olabilir. \u00d6nceki IP adresi yap\u0131land\u0131rmas\u0131n\u0131 geri y\u00fckleyin veya cihazlar\u0131 Home Assistant ile yeniden yap\u0131land\u0131r\u0131n."
+        }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "m\u00fcrekkep",
+                "laser": "lazer"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/zh-Hans.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "\u8fde\u63a5\u5230{device}\u6253\u5370\u673a\u65f6\u53d1\u751f\u9519\u8bef\uff1a{error}"
         },
+        "serial_mismatch": {
+            "message": "{device}\u7684\u5e8f\u5217\u53f7\u4e0e\u914d\u7f6e\u4e2d\u7684\u5e8f\u5217\u53f7\u4e0d\u5339\u914d\u3002\u53ef\u80fd\u662f\u4e24\u53f0 Brother \u6253\u5370\u673a\u7684 IP \u5730\u5740\u4e92\u6362\u4e86\u3002\u8bf7\u6062\u590d\u4e4b\u524d\u7684 IP \u5730\u5740\u914d\u7f6e\uff0c\u6216\u4f7f\u7528 Home Assistant \u91cd\u65b0\u914d\u7f6e\u8bbe\u5907\u3002"
+        },
         "update_error": {
             "message": "\u4ece{device}\u6253\u5370\u673a\u68c0\u7d22\u6570\u636e\u65f6\u53d1\u751f\u9519\u8bef\uff1a{error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "\u55b7\u58a8",
+                "laser": "\u6fc0\u5149"
+            }
+        }
     }
 }

homeassistant/components/brother/translations/zh-Hant.json

@@ -207,8 +207,19 @@
         "cannot_connect": {
             "message": "\u9023\u7dda\u81f3{device}\u5370\u8868\u6a5f\u6642\u767c\u751f\u932f\u8aa4\uff1a{error}"
         },
+        "serial_mismatch": {
+            "message": "{device} \u7684\u5e8f\u865f\u8207\u8a2d\u5b9a\u4e2d\u7684\u5e8f\u865f\u4e0d\u7b26\u3002\u53ef\u80fd\u662f\u5169\u53f0 Brother \u5370\u8868\u6a5f\u7684 IP \u4f4d\u5740\u4e92\u63db\u4e86\u3002\u8acb\u9084\u539f\u5148\u524d\u7684 IP \u4f4d\u5740\u8a2d\u5b9a\u3001\u6216\u4f7f\u7528 Home Assistant \u91cd\u65b0\u8a2d\u5b9a\u88dd\u7f6e\u3002"
+        },
         "update_error": {
             "message": "\u7531{device}\u5370\u8868\u6a5f\u7372\u53d6\u8cc7\u6599\u6642\u767c\u751f\u932f\u8aa4\uff1a{error}"
         }
+    },
+    "selector": {
+        "printer_type": {
+            "options": {
+                "ink": "\u5674\u58a8",
+                "laser": "\u96f7\u5c04"
+            }
+        }
     }
 }

homeassistant/components/brunt/translations/it.json

@@ -2,7 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "L'account \u00e8 gi\u00e0 configurato",
-            "reauth_successful": "L'autenticazione ha avuto successo"
+            "reauth_successful": "La riautenticazione \u00e8 avvenuta con successo"
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",

homeassistant/components/bryant_evolution/translations/it.json

@@ -2,7 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
-            "reconfigure_successful": "La riconfigurazione \u00e8 stata completata con successo"
+            "reconfigure_successful": "La riconfigurazione \u00e8 avvenuta con successo"
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",

homeassistant/components/bsblan/translations/it.json

@@ -3,7 +3,7 @@
         "abort": {
             "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
             "cannot_connect": "Impossibile connettersi",
-            "reauth_successful": "L'autenticazione ha avuto successo"
+            "reauth_successful": "La riautenticazione \u00e8 avvenuta con successo"
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",

homeassistant/components/bsblan/translations/sr-Latn.json

@@ -1,5 +1,9 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Ure\u0111aj je ve\u0107 konfiguris\u00e1n"
+        },
+        "flow_title": "{name}",
         "step": {
             "discovery_confirm": {
                 "data": {

homeassistant/components/bsblan/translations/tr.json

@@ -2,13 +2,24 @@
     "config": {
         "abort": {
             "already_configured": "Cihaz zaten yap\u0131land\u0131r\u0131lm\u0131\u015f",
-            "cannot_connect": "Ba\u011flanma hatas\u0131"
+            "cannot_connect": "Ba\u011flanma hatas\u0131",
+            "reauth_successful": "Yeniden kimlik do\u011frulama ba\u015far\u0131l\u0131 oldu"
         },
         "error": {
-            "cannot_connect": "Ba\u011flanma hatas\u0131"
+            "cannot_connect": "Ba\u011flanma hatas\u0131",
+            "invalid_auth": "Ge\u00e7ersiz kimlik do\u011frulama"
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "passkey": "Ge\u00e7i\u015f anahtar\u0131 dizesi",
+                    "password": "\u015eifre",
+                    "username": "Kullan\u0131c\u0131 Ad\u0131"
+                },
+                "description": "BSB-Lan entegrasyonunun yeniden kimlik do\u011frulamas\u0131 yapmas\u0131 gerekiyor {name}",
+                "title": "{name} i\u00e7in kimlik do\u011frulaman\u0131n s\u00fcresi doldu"
+            },
             "user": {
                 "data": {
                     "host": "Sunucu",
@@ -37,6 +48,15 @@
         },
         "set_temperature_error": {
             "message": "S\u0131cakl\u0131k ayarlan\u0131rken bir hata olu\u015ftu"
+        },
+        "setup_auth_error": {
+            "message": "Statik ayg\u0131t verileri al\u0131n\u0131rken kimlik do\u011frulama ba\u015far\u0131s\u0131z oldu"
+        },
+        "setup_connection_error": {
+            "message": "BSB-Lan ayg\u0131t\u0131ndan statik ayg\u0131t verileri al\u0131namad\u0131 {host}"
+        },
+        "setup_general_error": {
+            "message": "Statik ayg\u0131t verileri al\u0131n\u0131rken bilinmeyen bir hata olu\u015ftu"
         }
     }
 }

homeassistant/components/bthome/binary_sensor.py

@@ -63,6 +63,7 @@ BINARY_SENSOR_DESCRIPTIONS = {
     ),
     BTHomeBinarySensorDeviceClass.GENERIC: BinarySensorEntityDescription(
         key=BTHomeBinarySensorDeviceClass.GENERIC,
+        translation_key="generic",
     ),
     BTHomeBinarySensorDeviceClass.LIGHT: BinarySensorEntityDescription(
         key=BTHomeBinarySensorDeviceClass.LIGHT,
@@ -159,10 +160,7 @@ def sensor_update_to_bluetooth_data_update(
             device_key_to_bluetooth_entity_key(device_key): sensor_values.native_value
             for device_key, sensor_values in sensor_update.binary_entity_values.items()
         },
-        entity_names={
-            device_key_to_bluetooth_entity_key(device_key): sensor_values.name
-            for device_key, sensor_values in sensor_update.binary_entity_values.items()
-        },
+        entity_names={},
     )
 
 

homeassistant/components/bthome/sensor.py

@@ -59,6 +59,7 @@ SENSOR_DESCRIPTIONS = {
         key=f"{BTHomeSensorDeviceClass.ACCELERATION}_{Units.ACCELERATION_METERS_PER_SQUARE_SECOND}",
         native_unit_of_measurement=Units.ACCELERATION_METERS_PER_SQUARE_SECOND,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="acceleration",
     ),
     # Battery (percent)
     (BTHomeSensorDeviceClass.BATTERY, Units.PERCENTAGE): SensorEntityDescription(
@@ -72,6 +73,7 @@ SENSOR_DESCRIPTIONS = {
     (BTHomeExtendedSensorDeviceClass.CHANNEL, None): SensorEntityDescription(
         key=str(BTHomeExtendedSensorDeviceClass.CHANNEL),
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="channel",
     ),
     # Conductivity (μS/cm)
     (
@@ -87,6 +89,7 @@ SENSOR_DESCRIPTIONS = {
     (BTHomeSensorDeviceClass.COUNT, None): SensorEntityDescription(
         key=str(BTHomeSensorDeviceClass.COUNT),
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="count",
     ),
     # CO2 (parts per million)
     (
@@ -114,12 +117,14 @@ SENSOR_DESCRIPTIONS = {
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="dew_point",
     ),
     # Directions (°)
     (BTHomeExtendedSensorDeviceClass.DIRECTION, Units.DEGREE): SensorEntityDescription(
         key=f"{BTHomeExtendedSensorDeviceClass.DIRECTION}_{Units.DEGREE}",
         native_unit_of_measurement=DEGREE,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="direction",
     ),
     # Distance (mm)
     (
@@ -173,6 +178,7 @@ SENSOR_DESCRIPTIONS = {
         key=f"{BTHomeSensorDeviceClass.GYROSCOPE}_{Units.GYROSCOPE_DEGREES_PER_SECOND}",
         native_unit_of_measurement=Units.GYROSCOPE_DEGREES_PER_SECOND,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="gyroscope",
     ),
     # Humidity in (percent)
     (BTHomeSensorDeviceClass.HUMIDITY, Units.PERCENTAGE): SensorEntityDescription(
@@ -215,6 +221,7 @@ SENSOR_DESCRIPTIONS = {
         state_class=SensorStateClass.MEASUREMENT,
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
+        translation_key="packet_id",
     ),
     # PM10 (μg/m3)
     (
@@ -263,12 +270,14 @@ SENSOR_DESCRIPTIONS = {
     # Raw (-)
     (BTHomeExtendedSensorDeviceClass.RAW, None): SensorEntityDescription(
         key=str(BTHomeExtendedSensorDeviceClass.RAW),
+        translation_key="raw",
     ),
     # Rotation (°)
     (BTHomeSensorDeviceClass.ROTATION, Units.DEGREE): SensorEntityDescription(
         key=f"{BTHomeSensorDeviceClass.ROTATION}_{Units.DEGREE}",
         native_unit_of_measurement=DEGREE,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="rotation",
     ),
     # Rotational speed (rpm)
     (
@@ -278,6 +287,7 @@ SENSOR_DESCRIPTIONS = {
         key=f"{BTHomeExtendedSensorDeviceClass.ROTATIONAL_SPEED}_{Units.REVOLUTIONS_PER_MINUTE}",
         native_unit_of_measurement=REVOLUTIONS_PER_MINUTE,
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="rotational_speed",
     ),
     # Signal Strength (RSSI) (dB)
     (
@@ -311,6 +321,7 @@ SENSOR_DESCRIPTIONS = {
     # Text (-)
     (BTHomeExtendedSensorDeviceClass.TEXT, None): SensorEntityDescription(
         key=str(BTHomeExtendedSensorDeviceClass.TEXT),
+        translation_key="text",
     ),
     # Timestamp (datetime object)
     (
@@ -327,6 +338,7 @@ SENSOR_DESCRIPTIONS = {
     ): SensorEntityDescription(
         key=str(BTHomeSensorDeviceClass.UV_INDEX),
         state_class=SensorStateClass.MEASUREMENT,
+        translation_key="uv_index",
     ),
     # Volatile organic Compounds (VOC) (μg/m3)
     (
@@ -423,10 +435,7 @@ def sensor_update_to_bluetooth_data_update(
             )
             for device_key, sensor_values in sensor_update.entity_values.items()
         },
-        entity_names={
-            device_key_to_bluetooth_entity_key(device_key): sensor_values.name
-            for device_key, sensor_values in sensor_update.entity_values.items()
-        },
+        entity_names={},
     )
 
 

homeassistant/components/bthome/strings.json

@@ -47,6 +47,11 @@
     }
   },
   "entity": {
+    "binary_sensor": {
+      "generic": {
+        "name": "Generic"
+      }
+    },
     "event": {
       "button": {
         "state_attributes": {
@@ -73,6 +78,44 @@
           }
         }
       }
+    },
+    "sensor": {
+      "acceleration": {
+        "name": "Acceleration"
+      },
+      "channel": {
+        "name": "Channel"
+      },
+      "count": {
+        "name": "Count"
+      },
+      "dew_point": {
+        "name": "Dew point"
+      },
+      "direction": {
+        "name": "Direction"
+      },
+      "gyroscope": {
+        "name": "Gyroscope"
+      },
+      "packet_id": {
+        "name": "Packet ID"
+      },
+      "raw": {
+        "name": "Raw"
+      },
+      "rotation": {
+        "name": "Rotation"
+      },
+      "rotational_speed": {
+        "name": "Rotational speed"
+      },
+      "text": {
+        "name": "Text"
+      },
+      "uv_index": {
+        "name": "UV Index"
+      }
     }
   }
 }

homeassistant/components/bthome/translations/bg.json

@@ -45,6 +45,32 @@
                     }
                 }
             }
+        },
+        "sensor": {
+            "channel": {
+                "name": "\u041a\u0430\u043d\u0430\u043b"
+            },
+            "dew_point": {
+                "name": "\u0422\u043e\u0447\u043a\u0430 \u043d\u0430 \u043e\u0440\u043e\u0441\u044f\u0432\u0430\u043d\u0435"
+            },
+            "direction": {
+                "name": "\u041f\u043e\u0441\u043e\u043a\u0430"
+            },
+            "gyroscope": {
+                "name": "\u0416\u0438\u0440\u043e\u0441\u043a\u043e\u043f"
+            },
+            "rotation": {
+                "name": "\u0412\u044a\u0440\u0442\u0435\u043d\u0435"
+            },
+            "rotational_speed": {
+                "name": "\u0421\u043a\u043e\u0440\u043e\u0441\u0442 \u043d\u0430 \u0432\u044a\u0440\u0442\u0435\u043d\u0435"
+            },
+            "text": {
+                "name": "\u0422\u0435\u043a\u0441\u0442"
+            },
+            "uv_index": {
+                "name": "UV \u0438\u043d\u0434\u0435\u043a\u0441"
+            }
         }
     }
 }

homeassistant/components/bthome/translations/cs.json

@@ -47,6 +47,11 @@
         }
     },
     "entity": {
+        "binary_sensor": {
+            "generic": {
+                "name": "Obecn\u00fd"
+            }
+        },
         "event": {
             "button": {
                 "state_attributes": {
@@ -73,6 +78,44 @@
                     }
                 }
             }
+        },
+        "sensor": {
+            "acceleration": {
+                "name": "Zrychlen\u00ed"
+            },
+            "channel": {
+                "name": "Kan\u00e1l"
+            },
+            "count": {
+                "name": "Po\u010det"
+            },
+            "dew_point": {
+                "name": "Rosn\u00fd bod"
+            },
+            "direction": {
+                "name": "Sm\u011br"
+            },
+            "gyroscope": {
+                "name": "Gyroskop"
+            },
+            "packet_id": {
+                "name": "ID paketu"
+            },
+            "raw": {
+                "name": "Raw"
+            },
+            "rotation": {
+                "name": "Oto\u010den\u00ed"
+            },
+            "rotational_speed": {
+                "name": "Rychlost ot\u00e1\u010den\u00ed"
+            },
+            "text": {
+                "name": "Text"
+            },
+            "uv_index": {
+                "name": "UV index"
+            }
         }
     }
 }