homeassistant 2025.11.2__py3-none-any.whl → 2025.12.0__py3-none-any.whl

homeassistant/components/mqtt/translations/it.json

@@ -2,8 +2,8 @@
     "config": {
         "abort": {
             "already_configured": "Il servizio \u00e8 gi\u00e0 configurato",
-            "reauth_successful": "L'autenticazione ha avuto successo",
-            "reconfigure_successful": "La riconfigurazione \u00e8 stata completata con successo",
+            "reauth_successful": "La riautenticazione \u00e8 avvenuta con successo",
+            "reconfigure_successful": "La riconfigurazione \u00e8 avvenuta con successo",
             "single_instance_allowed": "Gi\u00e0 configurato. \u00c8 possibile una sola configurazione."
         },
         "error": {
@@ -152,7 +152,8 @@
                                 "preset_modes": "Modalit\u00e0 preimpostate"
                             },
                             "data_description": {
-                                "preset_mode_state_topic": "L'argomento MQTT a cui sottoscriversi per ricevere la modalit\u00e0 preimpostata della ventola. [Scopri di pi\u00f9.]({url}#preset_mode_state_topic)"
+                                "preset_mode_state_topic": "L'argomento MQTT a cui sottoscriversi per ricevere la modalit\u00e0 preimpostata della ventola. [Scopri di pi\u00f9.]({url}#preset_mode_state_topic)",
+                                "preset_mode_value_template": "Definisce un [modello]({value_templating_url}) per estrarre il valore della modalit\u00e0 preimpostata della ventola."
                             },
                             "name": "Impostazioni modalit\u00e0 predefinita"
                         },
@@ -204,6 +205,7 @@
                                 "payload_reset_preset_mode": "Un payload speciale che reimposta l'attributo dello stato della modalit\u00e0 preimpostata della ventola su sconosciuto quando viene ricevuto sul topic dello stato della modalit\u00e0 preimpostata.",
                                 "preset_mode_command_topic": "L'argomento MQTT per pubblicare comandi per cambiare la modalit\u00e0 preimpostata della ventola. [Scopri di pi\u00f9.]({url}#preset_mode_command_topic)",
                                 "preset_mode_state_topic": "L'argomento MQTT a cui sottoscriversi per ricevere la modalit\u00e0 preimpostata della ventola. [Scopri di pi\u00f9.]({url}#preset_mode_state_topic)",
+                                "preset_mode_value_template": "Definisce un [modello]({value_templating_url}) per estrarre il valore della modalit\u00e0 preimpostata della ventola.",
                                 "preset_modes": "Elenco delle modalit\u00e0 predefinite disponibili per questo ventilatore. Alcuni esempi comuni sono auto, smart, whoosh, eco e breeze."
                             },
                             "name": "Impostazioni modalit\u00e0 predefinita"
@@ -219,11 +221,21 @@
                                 "speed_range_min": "Intervallo di velocit\u00e0 minimo"
                             },
                             "data_description": {
-                                "payload_reset_percentage": "Un payload speciale che reimposta l'attributo dello stato percentuale della velocit\u00e0 della ventola su sconosciuto quando ricevuto sull'argomento dello stato percentuale.",
-                                "percentage_command_topic": "L'argomento MQTT per la pubblicazione dei comandi per modificare lo stato della velocit\u00e0 della ventola in base a una percentuale. [Scopri di pi\u00f9.]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "L'argomento MQTT a cui sottoscriversi per ricevere la velocit\u00e0 della ventola in base alla percentuale. [Scopri di pi\u00f9.]({url}#percentage_state_topic)"
+                                "payload_reset_percentage": "Un payload speciale che reimposta l'attributo dello stato percentuale della velocit\u00e0 della ventola su sconosciuto quando ricevuto sull'argomento dello stato percentuale."
                             },
                             "name": "Impostazioni di velocit\u00e0"
+                        },
+                        "text_advanced_settings": {
+                            "data": {
+                                "max": "Lunghezza massima",
+                                "mode": "Modalit\u00e0",
+                                "pattern": "Modello"
+                            },
+                            "data_description": {
+                                "max": "Lunghezza massima del testo inserito",
+                                "mode": "Modalit\u00e0 di inserimento del testo",
+                                "pattern": "Un modello regex valido"
+                            }
                         }
                     }
                 }
@@ -428,7 +440,8 @@
                 "alarm_control_panel": "Pannello di controllo degli allarmi",
                 "binary_sensor": "Sensore binario",
                 "climate": "Climatizzatore",
-                "fan": "Ventilatore"
+                "fan": "Ventilatore",
+                "text": "Testo"
             }
         },
         "set_ca_cert": {
@@ -442,6 +455,12 @@
             "options": {
                 "measurement_angle": "Angolo di misura"
             }
+        },
+        "text_mode": {
+            "options": {
+                "password": "Password",
+                "text": "Testo"
+            }
         }
     },
     "services": {
@@ -487,8 +506,6 @@
     },
     "triggers": {
         "_": {
-            "description": "Quando viene ricevuto un messaggio specifico su un determinato argomento MQTT.",
-            "description_configured": "Quando \u00e8 stato ricevuto un messaggio MQTT",
             "fields": {
                 "payload": {
                     "description": "Il dato del messaggio che determina l'attivazione.",
@@ -498,8 +515,7 @@
                     "description": "Argomento MQTT da ascoltare.",
                     "name": "Argomento"
                 }
-            },
-            "name": "MQTT"
+            }
         }
     }
 }

homeassistant/components/mqtt/translations/lt.json

@@ -242,12 +242,15 @@
                         "fan_feature_speed": "Grei\u010dio palaikymas",
                         "image_processing_mode": "Vaizdo apdorojimo re\u017eimas",
                         "options": "Prid\u0117ti parinkt\u012f",
+                        "reports_position": "Ataskait\u0173 pozicija",
                         "schema": "Schema",
                         "state_class": "B\u016bsenos klas\u0117",
                         "suggested_display_precision": "Si\u016blomas rodymo tikslumas",
                         "supported_features": "Palaikomos funkcijos",
                         "temperature_unit": "Temperat\u016bros vienetas",
-                        "unit_of_measurement": "Matavimo vienetas"
+                        "unit_of_measurement": "Matavimo vienetas",
+                        "water_heater_feature_current_temperature": "Dabartin\u0117s temperat\u016bros palaikymas",
+                        "water_heater_feature_power": "\u012ejungimo/i\u0161jungimo palaikymas"
                     },
                     "data_description": {
                         "alarm_control_panel_code_mode": "Konfig\u016bruojama, kaip signalizacijos valdymo pultas patvirtina kod\u0105. Vietinis kodas sukonfig\u016bruojamas su objektu ir patvirtinamas Home Assistant. Nuotolinis kodas siun\u010diamas \u012f \u012frengin\u012f ir patvirtinamas nuotoliniu b\u016bdu. [Su\u017einokite daugiau.] ( {url} #kodas)",
@@ -269,12 +272,15 @@
                         "fan_feature_speed": "Ventiliatorius palaiko kelis grei\u010dius.",
                         "image_processing_mode": "Pasirinkite, kaip bus gaunami vaizdo duomenys.",
                         "options": "Leid\u017eiam\u0173 jutiklio b\u016bsenos ver\u010di\u0173 parinktys. Jutiklio \u012erenginio klas\u0117 turi b\u016bti nustatyta \u012f Enumeration. Nustatymo 'Parinktys' negalima naudoti kartu su b\u016bsenos klase arba matavimo vienetu.",
+                        "reports_position": "Nustatykite \u0161i\u0105 parinkt\u012f, jei vo\u017etuvas prane\u0161a apie pad\u0117t\u012f arba palaiko pad\u0117ties nustatym\u0105. \u012ejungus \u0161i\u0105 parinkt\u012f, bus skelbiama pad\u0117tis, o ne naudingoji apkrova, apibr\u0117\u017eta naudingosios apkrovos \"open\", naudingosios apkrovos \"close\" arba naudingosios apkrovos \"stop\". Gavus prane\u0161imus, b\u016bsenos tema priims skaitmeninius naudingosios apkrovos duomenis arba vien\u0105 i\u0161 sukonfig\u016bruot\u0173 b\u016bsenos prane\u0161im\u0173.",
                         "schema": "Naudotina schema. [Su\u017einokite daugiau]({url}#comparison-of-light-mqtt-schemas)",
-                        "state_class": "Jutiklio [B\u016bsenos klas\u0117]( {available_state_classes_url} ). [Su\u017einokite daugiau.]( {url} #state_class)",
+                        "state_class": "[B\u016bsenos klas\u0117]({available_state_classes_url}) jutiklio. [Su\u017einokite daugiau.]({url}#valstyb\u0117s_klas\u0117)",
                         "suggested_display_precision": "De\u0161imt\u0173j\u0173 tikslumu skai\u010dius, kuris tur\u0117t\u0173 b\u016bti naudojamas {platform} esyb\u0117s b\u016bsenos po apvalinimo. [Su\u017einokite daugiau]({url}#suggested_display_precision)",
                         "supported_features": "Funkcijos, kurias palaiko objektas.",
-                        "temperature_unit": "Tai nustato natyv\u0173 matavimo vienet\u0105, su kuriuo veikia MQTT klimato prietaisas.",
-                        "unit_of_measurement": "Apibr\u0117\u017eia matavimo vienet\u0105, jei toks yra."
+                        "temperature_unit": "Tai nustato natyv\u0173 matavimo vienet\u0105, su kuriuo veikia MQTT \u012frenginys.",
+                        "unit_of_measurement": "Apibr\u0117\u017eia matavimo vienet\u0105, jei toks yra.",
+                        "water_heater_feature_current_temperature": "Vandens \u0161ildytuvas palaiko esamos temperat\u016bros prane\u0161imo funkcij\u0105.",
+                        "water_heater_feature_power": "Vandens \u0161ildytuvas palaiko maitinimo \"\u012fjungimo\" ir \"i\u0161jungimo\" komandas."
                     },
                     "description": "Sukonfig\u016bruokite konkre\u010di\u0105 {platform} subjekto \"{entity}\" informacij\u0105:",
                     "sections": {
@@ -356,6 +362,8 @@
                         "payload_on": "\u017dinut\u0117 \u201e\u012fjungta\u201c",
                         "payload_press": "\u017dinut\u0117 \u201epaspaustas\u201c",
                         "payload_reset": "Naudingoji apkrova \"i\u0161 naujo nustatyti\"",
+                        "position_closed": "Pozicija \"u\u017edaryta\"",
+                        "position_open": "Pozicija \"atvira\"",
                         "qos": "QoS",
                         "red_template": "Raudonas \u0161ablonas",
                         "retain": "I\u0161laikyti",
@@ -396,7 +404,7 @@
                         "min": "Minimali vert\u0117. [Su\u017einokite daugiau.] ( {url} #min)",
                         "mode": "Valdykite, kaip numeris tur\u0117t\u0173 b\u016bti rodomas vartotojo s\u0105sajoje. [Su\u017einokite daugiau.] ( {url} #mode)",
                         "mode_command_template": "[\u0160ablonas]( {command_templating_url} ), skirtas apibr\u0117\u017eti veikimo re\u017eim\u0105, kuris bus siun\u010diamas \u012f veikimo re\u017eimo komandos tem\u0105. [Su\u017einokite daugiau.]( {url} #mode_command_template)",
-                        "mode_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas klimato re\u017eimo keitimui. [Su\u017einokite daugiau.] ( {url} #mode_command_topic)",
+                        "mode_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas pakeisti veikimo re\u017eim\u0105. [Su\u017einokite daugiau.]({url}#mode_command_topic)",
                         "mode_state_template": "Apibr\u0117\u017eia [template]( {value_templating_url} ), kad b\u016bt\u0173 galima i\u0161gauti veikimo re\u017eimo b\u016bsen\u0105. [Su\u017einokite daugiau.]( {url} #mode_state_template)",
                         "mode_state_topic": "MQTT tema u\u017esiprenumeravo gauti veikimo re\u017eimo b\u016bsenos prane\u0161imus. [Su\u017einokite daugiau.] ( {url} #mode_state_topic)",
                         "modes": "Palaikom\u0173 veikimo re\u017eim\u0173 s\u0105ra\u0161as. [Su\u017einokite daugiau.] ( {url} #re\u017eimai)",
@@ -407,6 +415,8 @@
                         "payload_on": "\u017dinut\u0117s turinys, \u017eymintis b\u016bsen\u0105 \u201e\u012fjungta\u201c.",
                         "payload_press": "\u017dinut\u0117, kuri bus siun\u010diama suaktyvinus mygtuk\u0105.",
                         "payload_reset": "Naudingoji apkrova, gauta b\u016bsenos temoje, kuri atkuria objekto b\u016bsen\u0105 \u012f ne\u017einom\u0105.",
+                        "position_closed": "Skai\u010dius, rodantis u\u017edaryt\u0105 pad\u0117t\u012f. Vo\u017etuvo pad\u0117tis bus pakeista \u012f diapazon\u0105 (pad\u0117tis \"u\u017edaryta\"...pad\u0117tis \"atidaryta\"), kai atliekamas veiksmas, ir suma\u017einta, kai gaunama reik\u0161m\u0117.",
+                        "position_open": "Skai\u010dius, \u017eymintis atidaryt\u0105 pad\u0117t\u012f. Vo\u017etuvo pad\u0117tis bus pakeista \u012f diapazon\u0105 (pad\u0117tis \u201eu\u017edaryta\u201c...pad\u0117tis \u201eatidaryta\u201c), kai atliekamas veiksmas, ir suma\u017einta, kai gaunama reik\u0161m\u0117.",
                         "qos": "QoS reik\u0161m\u0117, kuri\u0105 tur\u0117t\u0173 naudoti {platform} subjektas.",
                         "red_template": "[Template]( {value_templating_url} ), skirta i\u0161gauti raudon\u0105 spalv\u0105 i\u0161 b\u016bsenos naudingosios apkrovos reik\u0161m\u0117s. Tikimasi, kad \u0161ablono rezultatas bus sveikasis skai\u010dius nuo 0 iki 255.",
                         "retain": "Pasirinkite, ar subjekto {platform} paskelbtos vert\u0117s tur\u0117t\u0173 b\u016bti saugomos MQTT brokeryje.",
@@ -719,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "Specialus \u017einut\u0117s turinys, kuris, gautas procentin\u0117s b\u016bsenos temoje, atkuria ventiliatoriaus grei\u010dio procentin\u0117s b\u016bsenos atribut\u0105 \u012f ne\u017einom\u0105.",
                                 "percentage_command_template": "[\u0160ablonas]( {command_templating_url} ), skirtas sudaryti nauding\u0105j\u0105 apkrov\u0105, kuri bus publikuojama procentin\u0117s dalies komandos temoje.",
-                                "percentage_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas ventiliatoriaus grei\u010dio b\u016bsenai keisti pagal procentin\u0119 reik\u0161m\u0119. [Su\u017einokite daugiau.] ( {url} #percentage_command_topic)",
-                                "percentage_state_topic": "MQTT tema u\u017esiprenumeravo ventiliatoriaus grei\u010dio gavim\u0105 pagal procent\u0105. [Su\u017einokite daugiau.] ( {url} #percentage_state_topic)",
+                                "percentage_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas ventiliatoriaus grei\u010dio b\u016bsenai keisti pagal procentin\u012f nustatym\u0105. Reik\u0161m\u0117 turi b\u016bti diapazone nuo \"grei\u010dio diapazonas min\" iki \"grei\u010dio diapazonas maks\". [Su\u017einokite daugiau.]({url}#procent\u0173_komandos_tema)",
+                                "percentage_state_topic": "MQTT tema u\u017esiprenumeravo ventiliatoriaus grei\u010dio b\u016bsenos gavim\u0105. Tai reik\u0161m\u0117 diapazone nuo \"grei\u010dio diapazonas min\" iki \"grei\u010dio diapazonas maks\". [Su\u017einokite daugiau.]({url}#procentin\u0117_valstyb\u0117s_tema)",
                                 "percentage_value_template": "Apibr\u0117\u017eia [template]( {value_templating_url} ), kad b\u016bt\u0173 i\u0161gauta grei\u010dio procentin\u0117 vert\u0117.",
                                 "speed_range_max": "Skaitmenin\u0117s i\u0161vesties diapazono maksimumas (atitinka 100 %). Procentinis \u017eingsnis yra 100 / grei\u010di\u0173 skai\u010dius \u201egrei\u010di\u0173 diapazone\u201c.",
                                 "speed_range_min": "Minimalus skaitinis i\u0161vesties diapazonas (i\u0161jungimas ne\u012ftrauktas, tod\u0117l speed_range_min - 1 rei\u0161kia 0 %). Procentinis \u017eingsnis yra 100 / grei\u010di\u0173 skai\u010dius \u201egrei\u010di\u0173 diapazone\u201c."
@@ -951,13 +961,13 @@
                                 "temperature_state_topic": "Temperat\u016bros b\u016bsenos tema"
                             },
                             "data_description": {
-                                "initial": "Klimatas inicijuojamas pagal \u0161i\u0105 tikslin\u0119 temperat\u016br\u0105.",
+                                "initial": "\u012erenginys inicijuojamas su \u0161ia tiksline temperat\u016bra.",
                                 "max_temp": "Maksimali tikslin\u0117 temperat\u016bra, kuri\u0105 galima nustatyti.",
                                 "min_temp": "Minimali tikslin\u0117 temperat\u016bra, kuri\u0105 galima nustatyti.",
                                 "precision": "Termostato veikimo tikslumas laipsniais.",
                                 "temp_step": "Tikslin\u0117s temperat\u016bros \u017eingsnis Celsijaus arba Farenheito laipsniais.",
                                 "temperature_command_template": "[\u0160ablonas]( {command_templating_url} ), skirtas sugeneruoti nauding\u0105j\u0105 apkrov\u0105, kuri bus publikuojama temperat\u016bros komandos temoje.",
-                                "temperature_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas pakeisti klimato tikslin\u0119 temperat\u016br\u0105. [Su\u017einokite daugiau.] ( {url} #temperature_command_topic)",
+                                "temperature_command_topic": "MQTT tema, skirta publikuoti komandas tikslinei temperat\u016brai keisti. [Su\u017einokite daugiau.]({url}#temperat\u016bros_komandos_tema)",
                                 "temperature_high_command_template": "[\u0160ablonas]( {command_templating_url} ), skirtas sud\u0117ti \u012fkrovai, kuri bus publikuojama vir\u0161utin\u0117s temperat\u016bros komandos temoje.",
                                 "temperature_high_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas pakeisti vir\u0161utin\u0119 klimato tikslin\u0119 temperat\u016br\u0105. [Su\u017einokite daugiau.] ( {url} #temperature_high_command_topic)",
                                 "temperature_high_state_template": "[\u0160ablonas]( {value_templating_url} ), skirtas gauti vir\u0161utin\u0117s temperat\u016bros b\u016bsenos temos reik\u0161m\u0119.",
@@ -970,6 +980,57 @@
                                 "temperature_state_topic": "MQTT tema, skirta prenumeruoti tikslin\u0117s temperat\u016bros poky\u010dius. [Su\u017einokite daugiau.] ( {url} #temperature_state_topic)"
                             },
                             "name": "Tikslin\u0117s temperat\u016bros nustatymai"
+                        },
+                        "text_advanced_settings": {
+                            "data": {
+                                "max": "Maksimalus ilgis",
+                                "min": "Minimalus ilgis",
+                                "mode": "Re\u017eimas",
+                                "pattern": "Ra\u0161tas"
+                            },
+                            "data_description": {
+                                "max": "Maksimalus teksto \u012fvesties ilgis",
+                                "min": "Minimalus teksto \u012fvesties ilgis",
+                                "mode": "Teksto \u012fvesties re\u017eimas",
+                                "pattern": "Galiojantis reguliariosios i\u0161rai\u0161kos \u0161ablonas"
+                            },
+                            "name": "I\u0161pl\u0117stiniai teksto objekto nustatymai"
+                        },
+                        "valve_payload_settings": {
+                            "data": {
+                                "payload_close": "Naudingoji apkrova \"u\u017edaryta\"",
+                                "payload_open": "Naudingoji apkrova \"atidaryta\"",
+                                "payload_stop": "Naudingoji apkrova \"stop\"",
+                                "state_closed": "Statusas \"u\u017edaryta\"",
+                                "state_closing": "Statusas \"u\u017edarymas\"",
+                                "state_open": "B\u016bkl\u0117 \"atvira\"",
+                                "state_opening": "B\u016bkl\u0117 \"atidarymas\""
+                            },
+                            "data_description": {
+                                "payload_close": "Naudingoji apkrova, siun\u010diama, kai duodama komanda \"u\u017edaryti\".",
+                                "payload_open": "Naudingoji apkrova, siun\u010diama, kai duodama komanda \"atidaryti\".",
+                                "payload_stop": "Naudingoji apkrova, siun\u010diama, kai duodama komanda \"stop\". Nustatykite \u0161i\u0105 nauding\u0105j\u0105 apkrov\u0105 tik tuo atveju, jei j\u016bs\u0173 vo\u017etuvas palaiko \"stop\" veiksm\u0105.",
+                                "state_closed": "Naudingoji apkrova, gauta b\u016bsenos temoje, kuri \u017eymi \"u\u017edar\u0105\" b\u016bsen\u0105.",
+                                "state_closing": "Naudingoji apkrova, gauta b\u016bsenos temoje, kuri \u017eymi \"u\u017edarymo\" b\u016bsen\u0105.",
+                                "state_open": "Naudingoji apkrova, gauta b\u016bsenos temoje, kuri \u017eymi b\u016bsen\u0105 \"atvira\".",
+                                "state_opening": "Naudingoji apkrova, gauta b\u016bsenos temoje, kuri \u017eymi \"pradin\u0119\" b\u016bsen\u0105."
+                            },
+                            "name": "Vo\u017etuvo naudingosios apkrovos nustatymai"
+                        },
+                        "water_heater_power_settings": {
+                            "data": {
+                                "payload_off": "\u017dinut\u0117 \u201ei\u0161jungta\u201c",
+                                "payload_on": "\u017dinut\u0117 \u201e\u012fjungta\u201c",
+                                "power_command_template": "Maitinimo komandos \u0161ablonas",
+                                "power_command_topic": "Galios komand\u0173 tema"
+                            },
+                            "data_description": {
+                                "payload_off": "\u017dinut\u0117s turinys, \u017eymintis b\u016bsen\u0105 \u201ei\u0161jungta\u201c.",
+                                "payload_on": "\u017dinut\u0117s turinys, \u017eymintis b\u016bsen\u0105 \u201e\u012fjungta\u201c.",
+                                "power_command_template": "[\u0160ablonas]( {command_templating_url} ), skirtas sudaryti nauding\u0105j\u0105 apkrov\u0105, kuri bus publikuojama power\u201c komandos temoje. Parametras `value` yra naudingoji apkrova, nustatyta \"\u012fjungta\" arba \"i\u0161jungta\".",
+                                "power_command_topic": "MQTT tema, skirta publikuoti komandas, skirtas pakeisti vandens \u0161ildytuvo maitinimo b\u016bsen\u0105. Siun\u010dia nauding\u0105j\u0105 apkrov\u0105, sukonfig\u016bruot\u0105 su nauding\u0105ja apkrova \"\u012fjungta\" arba nauding\u0105ja apkrova \"i\u0161jungta\". [Su\u017einokite daugiau.]({url}#power_command_topic)"
+                            },
+                            "name": "Maitinimo nustatymai"
                         }
                     },
                     "title": "Konfig\u016bruoti MQTT \u012frengin\u012f \"{mqtt_device}\""
@@ -1312,6 +1373,7 @@
                 "speed": "Greitis",
                 "sulphur_dioxide": "Sieros dioksidas",
                 "temperature": "Temperat\u016bra",
+                "temperature_delta": "Temperat\u016bros delta",
                 "timestamp": "Laiko \u017eyma",
                 "volatile_organic_compounds": "Lakieji organiniai junginiai",
                 "volatile_organic_compounds_parts": "Laki\u0173j\u0173 organini\u0173 jungini\u0173 dalys",
@@ -1331,6 +1393,12 @@
                 "switch": "Jungiklis"
             }
         },
+        "device_class_valve": {
+            "options": {
+                "gas": "Dujos",
+                "water": "Vanduo"
+            }
+        },
         "entity_category": {
             "options": {
                 "config": "Konfig\u016bracija",
@@ -1386,7 +1454,10 @@
                 "select": "Pasirinkimas",
                 "sensor": "Jutiklis",
                 "siren": "Sirena",
-                "switch": "Jungiklis"
+                "switch": "Jungiklis",
+                "text": "Tekstas",
+                "valve": "Vo\u017etuvas",
+                "water_heater": "Vandens \u0161ildytuvas"
             }
         },
         "set_ca_cert": {
@@ -1423,6 +1494,24 @@
                 "none": "N\u0117ra tikslin\u0117s temperat\u016bros",
                 "single": "Viena tikslin\u0117 temperat\u016bra"
             }
+        },
+        "text_mode": {
+            "options": {
+                "password": "Slapta\u017eodis",
+                "text": "Tekstas"
+            }
+        },
+        "water_heater_modes": {
+            "options": {
+                "auto": "Automatinis",
+                "eco": "Eco",
+                "electric": "Elektrinis",
+                "gas": "Dujos",
+                "heat_pump": "\u0160ilumos siurblys",
+                "high_demand": "Didel\u0117 paklausa",
+                "off": "I\u0161jungta",
+                "performance": "Spektaklis"
+            }
         }
     },
     "services": {
@@ -1473,8 +1562,7 @@
     },
     "triggers": {
         "_": {
-            "description": "Kai gaunamas konkretus prane\u0161imas tam tikra MQTT tema.",
-            "description_configured": "Kai gaunamas MQTT prane\u0161imas",
+            "description": "Suveikia gavus konkret\u0173 prane\u0161im\u0105 tam tikra MQTT tema.",
             "fields": {
                 "payload": {
                     "description": "\u017dinut\u0117s turinys, nuo kurio reikia suaktyvinti.",
@@ -1485,7 +1573,7 @@
                     "name": "Tema"
                 }
             },
-            "name": "MQTT"
+            "name": "Gautas MQTT prane\u0161imas"
         }
     }
 }

homeassistant/components/mqtt/translations/mk.json

@@ -93,6 +93,7 @@
                 "mqtt_platform_config": {
                     "data": {
                         "content_type": "\u0422\u0438\u043f \u043d\u0430 \u0441\u043e\u0434\u0440\u0436\u0438\u043d\u0430",
+                        "options": "\u041f\u043e\u0441\u0442\u0430\u0432\u0438 \u043e\u043f\u0446\u0438\u0438",
                         "payload_off": "\u0422\u043e\u0432\u0430\u0440\u043e\u0442 \"\u0438\u0441\u043a\u043b\u0443\u0447\u0435\u043d\"",
                         "payload_on": "\u0422\u043e\u0432\u0430\u0440\u043e\u0442 \"\u0432\u043a\u043b\u0443\u0447\u0435\u043d\"",
                         "qos": "QoS",
@@ -164,12 +165,28 @@
             }
         }
     },
+    "device_automation": {
+        "trigger_subtype": {
+            "turn_off": "\u0418\u0441\u043a\u043b\u0443\u0447\u0438",
+            "turn_on": "\u0412\u043a\u043b\u0443\u0447\u0438"
+        }
+    },
     "selector": {
+        "device_class_sensor": {
+            "options": {
+                "timestamp": "\u0412\u0440\u0435\u043c\u0435\u043d\u0441\u043a\u0430 \u043e\u0437\u043d\u0430\u043a\u0430"
+            }
+        },
         "entity_category": {
             "options": {
                 "diagnostic": "\u0414\u0438\u0458\u0430\u0433\u043d\u043e\u0441\u0442\u0438\u0447\u043a\u0438"
             }
         },
+        "light_schema": {
+            "options": {
+                "template": "\u0428\u0430\u0431\u043b\u043e\u043d"
+            }
+        },
         "on_command_type": {
             "options": {
                 "brightness": "\u041e\u0441\u0432\u0435\u0442\u043b\u0435\u043d\u043e\u0441\u0442",