homeassistant 2025.11.0b5__py3-none-any.whl → 2025.11.2__py3-none-any.whl

homeassistant/components/zha/translations/et.json

@@ -16,6 +16,11 @@
             "invalid_backup_json": "Sobimatu varukoopia JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Uue Zigbee v\u00f5rgu loomine. \n \n Selle protsessi osana otsime vaba v\u00f5rgukanalit, see v\u00f5ib v\u00f5tta minuti.",
+            "maybe_reset_old_radio": "Vana adapteri l\u00e4htestamine.\n\nVana adapter on varundatud ja l\u00e4htestatakse tehaseseadetele.",
+            "restore_backup": "V\u00f5rgus\u00e4tete taastamine uuele adapterile. \n \n See v\u00f5tab minuti."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -76,6 +81,16 @@
             "confirm": {
                 "description": "Kas soovid seadistada teenust {name} ?"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Adapteri IEEE-aadressi p\u00fcsiv asendamine"
+                },
+                "description": "Varukoopial on erinev IEEE aadress kui adapteril.  V\u00f5rgu n\u00f5uetekohaseks toimimiseks tuleks muuta ka adapteri IEEE aadressi.\n\nSee on p\u00fcsiv toiming.",
+                "title": "Adapteri IEEE aadressi \u00fclekirjutamine"
+            },
+            "form_new_network": {
+                "title": "Uue v\u00f5rgustiku moodustamine"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Adapteri t\u00fc\u00fcp"
@@ -116,6 +131,9 @@
                 },
                 "title": "Vana adapterit ei leitud"
             },
+            "restore_backup": {
+                "title": "V\u00f5rgu taastamine uuele adapterile"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Faili \u00fcleslaadimine"
@@ -1874,6 +1892,11 @@
             "invalid_backup_json": "Sobimatu varukoopia JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Uue Zigbee v\u00f5rgu loomine. \n \n Selle protsessi osana otsime vaba v\u00f5rgukanalit, see v\u00f5ib v\u00f5tta minuti.",
+            "maybe_reset_old_radio": "Vana adapteri l\u00e4htestamine.\n\nVana adapter on varundatud ja l\u00e4htestatakse tehaseseadetele.",
+            "restore_backup": "V\u00f5rgus\u00e4tete taastamine uuele adapterile. \n \n See v\u00f5tab minuti."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1919,6 +1942,16 @@
                 "description": "Vali Zigbee adapteri jadaport",
                 "title": "Vali jadaport"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Adapteri IEEE-aadressi p\u00fcsiv asendamine"
+                },
+                "description": "Varukoopial on erinev IEEE aadress kui adapteril.  V\u00f5rgu n\u00f5uetekohaseks toimimiseks tuleks muuta ka adapteri IEEE aadressi.\n\nSee on p\u00fcsiv toiming.",
+                "title": "Adapteri IEEE aadressi \u00fclekirjutamine"
+            },
+            "form_new_network": {
+                "title": "Uue v\u00f5rgustiku moodustamine"
+            },
             "init": {
                 "description": "Tehakse varundamine ja ZHA peatatakse. Kas soovid j\u00e4tkata?",
                 "title": "Seadista ZHA uuesti"
@@ -1943,6 +1976,9 @@
                 "description": "Sisesta jadapordi s\u00e4tted",
                 "title": "Jadapordi s\u00e4tted"
             },
+            "maybe_reset_old_radio": {
+                "title": "Vana adapteri l\u00e4htestamine"
+            },
             "plug_in_new_radio": {
                 "description": "Uut adapterit aadressil `{device_path}` ei leitud. \u00dchenda see ja j\u00e4tkamiseks kl\u00f5psa nuppu Submit.",
                 "title": "Uut adapterit ei leitud"
@@ -1971,6 +2007,9 @@
                 },
                 "title": "Teisaldamine v\u00f5i uuesti seadistamine"
             },
+            "restore_backup": {
+                "title": "V\u00f5rgu taastamine uuele adapterile"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Lae kirje \u00fcles"

homeassistant/components/zha/translations/ga.json

@@ -16,6 +16,11 @@
             "invalid_backup_json": "JSON c\u00faltaca neamhbhail\u00ed"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Ag foirmi\u00fa l\u00edonra Zigbee nua.\n\nD\u00e9anaimid scanadh le haghaidh cain\u00e9al l\u00edonra soil\u00e9ir mar chuid den phr\u00f3iseas seo, f\u00e9adfaidh s\u00e9 seo n\u00f3im\u00e9ad a th\u00f3g\u00e1il.",
+            "maybe_reset_old_radio": "Ag athshocr\u00fa an tsean-oiri\u00fanaitheora.\n\nT\u00e1 c\u00faltaca d\u00e9anta de do shean-oiri\u00fant\u00f3ir agus t\u00e1 s\u00e9 \u00e1 athshocr\u00fa go dt\u00ed an monarcha.",
+            "restore_backup": "Ag athch\u00f3iri\u00fa socruithe l\u00edonra chuig an oiri\u00fant\u00f3ir nua.\n\nT\u00f3gfaidh s\u00e9 seo n\u00f3im\u00e9ad."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -73,6 +78,16 @@
             "confirm": {
                 "description": "Ar mhaith leat {name} a chur ar bun?"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Cuir seoladh IEEE an oiri\u00fanaitheora in \u00e1it go buan"
+                },
+                "description": "T\u00e1 seoladh IEEE difri\u00fail ag do ch\u00faltaca n\u00e1 mar at\u00e1 ag d\u2019oiri\u00fan\u00f3ir. Chun go bhfeidhmeoidh do l\u00edonra i gceart, ba ch\u00f3ir seoladh IEEE d\u2019oiri\u00fan\u00f3ra a athr\u00fa freisin.\n\nIs oibr\u00edocht bhuan \u00ed seo.",
+                "title": "Seoladh IEEE an oiri\u00fanaitheora a athscr\u00edobh"
+            },
+            "form_new_network": {
+                "title": "L\u00edonra nua \u00e1 fhoirmi\u00fa"
+            },
             "manual_port_config": {
                 "data": {
                     "path": "Cos\u00e1n gl\u00e9as sraitheach"
@@ -84,6 +99,25 @@
                 },
                 "title": "Socruithe calafoirt sraitheach"
             },
+            "plug_in_new_radio": {
+                "description": "N\u00edor aims\u00edodh d\u2019oiri\u00fan\u00f3ir nua ag `{device_path}`.\nBreise\u00e1n isteach \u00e9 agus clice\u00e1il ar Cuir Isteach le lean\u00faint ar aghaidh.",
+                "title": "N\u00edor aims\u00edodh an t-oiri\u00fant\u00f3ir nua"
+            },
+            "plug_in_old_radio": {
+                "description": "N\u00edor aims\u00edodh d\u2019oiri\u00fan\u00f3ir sean ag `{device_path}`. Is f\u00e9idir leat iarracht eile a dh\u00e9anamh tar \u00e9is duit \u00e9 a phlug\u00e1il isteach ar\u00eds, n\u00f3 an seanoiri\u00fan\u00f3ir a athshocr\u00fa a scipe\u00e1il.\n\n**Rabhadh:** Mura nd\u00e9anann t\u00fa athshocr\u00fa an seanoiri\u00fanaitheora, d\u00e9an cinnte go bhfanfaidh s\u00e9 d\u00edcheangailte go buan. M\u00e1 phlug\u00e1lann t\u00fa isteach ar\u00eds \u00e9 n\u00edos d\u00e9ana\u00ed, beidh fadhbanna l\u00edonra mar thoradh air.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "D\u00e9an iarracht ceangal leis an sean-oiri\u00fant\u00f3ir ar\u00eds chun \u00e9 a athshocr\u00fa mar chuid den imirce.",
+                    "skip_reset_old_radio": "Seachain athshocr\u00fa an sean-oiri\u00fanaitheora agus lean ar aghaidh leis an imirce."
+                },
+                "menu_options": {
+                    "retry_old_radio": "D\u00e9an iarracht eile",
+                    "skip_reset_old_radio": "L\u00e9im an t-athshocr\u00fa"
+                },
+                "title": "N\u00edor aims\u00edodh an sean-oiri\u00fant\u00f3ir"
+            },
+            "restore_backup": {
+                "title": "Ag athch\u00f3iri\u00fa an l\u00edonra chuig an oiri\u00fant\u00f3ir nua"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Uasl\u00f3d\u00e1il comhad"
@@ -1820,6 +1854,11 @@
             "invalid_backup_json": "JSON c\u00faltaca neamhbhail\u00ed"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Ag foirmi\u00fa l\u00edonra Zigbee nua.\n\nD\u00e9anaimid scanadh le haghaidh cain\u00e9al l\u00edonra soil\u00e9ir mar chuid den phr\u00f3iseas seo, f\u00e9adfaidh s\u00e9 seo n\u00f3im\u00e9ad a th\u00f3g\u00e1il.",
+            "maybe_reset_old_radio": "Ag athshocr\u00fa an tsean-oiri\u00fanaitheora.\n\nT\u00e1 c\u00faltaca d\u00e9anta de do shean-oiri\u00fant\u00f3ir agus t\u00e1 s\u00e9 \u00e1 athshocr\u00fa go dt\u00ed an monarcha.",
+            "restore_backup": "Ag athch\u00f3iri\u00fa socruithe l\u00edonra chuig an oiri\u00fant\u00f3ir nua.\n\nT\u00f3gfaidh s\u00e9 seo n\u00f3im\u00e9ad."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1862,6 +1901,16 @@
                 },
                 "title": "Roghnaigh port sraitheach"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Cuir seoladh IEEE an oiri\u00fanaitheora in \u00e1it go buan"
+                },
+                "description": "T\u00e1 seoladh IEEE difri\u00fail ag do ch\u00faltaca n\u00e1 mar at\u00e1 ag d\u2019oiri\u00fan\u00f3ir. Chun go bhfeidhmeoidh do l\u00edonra i gceart, ba ch\u00f3ir seoladh IEEE d\u2019oiri\u00fan\u00f3ra a athr\u00fa freisin.\n\nIs oibr\u00edocht bhuan \u00ed seo.",
+                "title": "Seoladh IEEE an oiri\u00fanaitheora a athscr\u00edobh"
+            },
+            "form_new_network": {
+                "title": "L\u00edonra nua \u00e1 fhoirmi\u00fa"
+            },
             "init": {
                 "title": "Athchumraigh ZHA"
             },
@@ -1871,9 +1920,28 @@
                 },
                 "title": "Socruithe calafoirt sraitheach"
             },
+            "plug_in_new_radio": {
+                "description": "N\u00edor aims\u00edodh d\u2019oiri\u00fan\u00f3ir nua ag `{device_path}`.\nBreise\u00e1n isteach \u00e9 agus clice\u00e1il ar Cuir Isteach le lean\u00faint ar aghaidh.",
+                "title": "N\u00edor aims\u00edodh an t-oiri\u00fant\u00f3ir nua"
+            },
+            "plug_in_old_radio": {
+                "description": "N\u00edor aims\u00edodh d\u2019oiri\u00fan\u00f3ir sean ag `{device_path}`. Is f\u00e9idir leat iarracht eile a dh\u00e9anamh tar \u00e9is duit \u00e9 a phlug\u00e1il isteach ar\u00eds, n\u00f3 an seanoiri\u00fan\u00f3ir a athshocr\u00fa a scipe\u00e1il.\n\n**Rabhadh:** Mura nd\u00e9anann t\u00fa athshocr\u00fa an seanoiri\u00fanaitheora, d\u00e9an cinnte go bhfanfaidh s\u00e9 d\u00edcheangailte go buan. M\u00e1 phlug\u00e1lann t\u00fa isteach ar\u00eds \u00e9 n\u00edos d\u00e9ana\u00ed, beidh fadhbanna l\u00edonra mar thoradh air.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "D\u00e9an iarracht ceangal leis an sean-oiri\u00fant\u00f3ir ar\u00eds chun \u00e9 a athshocr\u00fa mar chuid den imirce.",
+                    "skip_reset_old_radio": "Seachain athshocr\u00fa an sean-oiri\u00fanaitheora agus lean ar aghaidh leis an imirce."
+                },
+                "menu_options": {
+                    "retry_old_radio": "D\u00e9an iarracht eile",
+                    "skip_reset_old_radio": "L\u00e9im an t-athshocr\u00fa"
+                },
+                "title": "N\u00edor aims\u00edodh an sean-oiri\u00fant\u00f3ir"
+            },
             "prompt_migrate_or_reconfigure": {
                 "title": "Imirce n\u00f3 athchumraigh"
             },
+            "restore_backup": {
+                "title": "Ag athch\u00f3iri\u00fa an l\u00edonra chuig an oiri\u00fant\u00f3ir nua"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Uasl\u00f3d\u00e1il comhad"

homeassistant/components/zha/translations/it.json

@@ -9,6 +9,11 @@
             "invalid_backup_json": "Backup JSON non valido"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Formazione di una nuova rete Zigbee. \n \n Come parte di questo processo, eseguiamo la scansione per trovare un canale di rete libero; questa operazione pu\u00f2 richiedere un minuto.",
+            "maybe_reset_old_radio": "Ripristino del vecchio adattatore. \n \n \u00c8 stato eseguito il backup del vecchio adattatore e si sta ripristinando le impostazioni di fabbrica.",
+            "restore_backup": "Ripristino delle impostazioni di rete sul nuovo adattatore. \n \n L'operazione richieder\u00e0 un minuto."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -27,11 +32,40 @@
             "confirm": {
                 "description": "Vuoi configurare {name}?"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Sostituire definitivamente l'indirizzo IEEE dell'adattatore"
+                },
+                "description": "Il backup ha un indirizzo IEEE diverso da quello dell'adattatore. Affinch\u00e9 la rete funzioni correttamente, \u00e8 necessario modificare anche l'indirizzo IEEE dell'adattatore.\n\nSi tratta di un'operazione permanente.",
+                "title": "Sovrascrivi l'indirizzo IEEE dell'adattatore"
+            },
+            "form_new_network": {
+                "title": "Creazione di una nuova rete"
+            },
             "manual_port_config": {
                 "data": {
                     "path": "Percorso del dispositivo seriale"
                 }
             },
+            "plug_in_new_radio": {
+                "description": "Il nuovo adattatore in `{device_path}` non \u00e8 stato trovato. \n Collegalo e fai clic su Invia per continuare.",
+                "title": "Nuovo adattatore non trovato"
+            },
+            "plug_in_old_radio": {
+                "description": "Il tuo vecchio adattatore in `{device_path}` non \u00e8 stato trovato. Puoi riprovare dopo averlo ricollegato oppure saltare il ripristino del vecchio adattatore. \n \n **Attenzione:** se salti il ripristino del vecchio adattatore, assicurati che rimanga scollegato in modo permanente. Ricollegarlo in un secondo momento causer\u00e0 problemi di rete.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Riprova a connetterti al vecchio adattatore per reimpostarlo come parte della migrazione.",
+                    "skip_reset_old_radio": "Salta il ripristino del vecchio adattatore e continua con la migrazione."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Riprova",
+                    "skip_reset_old_radio": "Salta il ripristino"
+                },
+                "title": "Vecchio adattatore non trovato"
+            },
+            "restore_backup": {
+                "title": "Ripristino della rete sul nuovo adattatore"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Carica un file"
@@ -780,6 +814,11 @@
             "invalid_backup_json": "Backup JSON non valido"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Formazione di una nuova rete Zigbee. \n \n Come parte di questo processo, eseguiamo la scansione per trovare un canale di rete libero; questa operazione pu\u00f2 richiedere un minuto.",
+            "maybe_reset_old_radio": "Ripristino del vecchio adattatore. \n \n \u00c8 stato eseguito il backup del vecchio adattatore e si sta ripristinando le impostazioni di fabbrica.",
+            "restore_backup": "Ripristino delle impostazioni di rete sul nuovo adattatore. \n \n L'operazione richieder\u00e0 un minuto."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -795,6 +834,16 @@
                     "upload_manual_backup": "Carica un backup manuale"
                 }
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Sostituire definitivamente l'indirizzo IEEE dell'adattatore"
+                },
+                "description": "Il backup ha un indirizzo IEEE diverso da quello dell'adattatore. Affinch\u00e9 la rete funzioni correttamente, \u00e8 necessario modificare anche l'indirizzo IEEE dell'adattatore.\n\nSi tratta di un'operazione permanente.",
+                "title": "Sovrascrivi l'indirizzo IEEE dell'adattatore"
+            },
+            "form_new_network": {
+                "title": "Creazione di una nuova rete"
+            },
             "init": {
                 "title": "Riconfigura ZHA"
             },
@@ -803,9 +852,28 @@
                     "path": "Percorso del dispositivo seriale"
                 }
             },
+            "plug_in_new_radio": {
+                "description": "Il nuovo adattatore in `{device_path}` non \u00e8 stato trovato. \n Collegalo e fai clic su Invia per continuare.",
+                "title": "Nuovo adattatore non trovato"
+            },
+            "plug_in_old_radio": {
+                "description": "Il tuo vecchio adattatore in `{device_path}` non \u00e8 stato trovato. Puoi riprovare dopo averlo ricollegato oppure saltare il ripristino del vecchio adattatore. \n \n **Attenzione:** se salti il ripristino del vecchio adattatore, assicurati che rimanga scollegato in modo permanente. Ricollegarlo in un secondo momento causer\u00e0 problemi di rete.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Riprova a connetterti al vecchio adattatore per reimpostarlo come parte della migrazione.",
+                    "skip_reset_old_radio": "Salta il ripristino del vecchio adattatore e continua con la migrazione."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Riprova",
+                    "skip_reset_old_radio": "Salta il ripristino"
+                },
+                "title": "Vecchio adattatore non trovato"
+            },
             "prompt_migrate_or_reconfigure": {
                 "title": "Migrare o riconfigurare"
             },
+            "restore_backup": {
+                "title": "Ripristino della rete sul nuovo adattatore"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Carica un file"

homeassistant/components/zha/translations/lt.json

@@ -16,6 +16,11 @@
             "invalid_backup_json": "Netinkama atsargin\u0117 JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Formuojamas naujas Zigbee tinklas. \n \n \u0160io proceso metu ie\u0161kome laisvo tinklo kanalo, tai gali u\u017etrukti minut\u0119.",
+            "maybe_reset_old_radio": "Atkuriamas seno adapterio nustatymas. \n \n J\u016bs\u0173 seno adapterio atsargin\u0117 kopija sukurta ir atkuriami gamykliniai nustatymai.",
+            "restore_backup": "Tinklo nustatym\u0173 atk\u016brimas naujame adapteryje. \n \n Tai u\u017etruks minut\u0119."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -76,6 +81,16 @@
             "confirm": {
                 "description": "Ar norite nustatyti {name} ?"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Visam laikui pakeiskite adapterio IEEE adres\u0105"
+                },
+                "description": "J\u016bs\u0173 atsargin\u0117s kopijos IEEE adresas skiriasi nuo j\u016bs\u0173 adapterio IEEE adreso. Kad j\u016bs\u0173 tinklas tinkamai veikt\u0173, taip pat reik\u0117t\u0173 pakeisti adapterio IEEE adres\u0105. \n \n Tai yra nuolatinis veiksmas.",
+                "title": "Perra\u0161yti adapterio IEEE adres\u0105"
+            },
+            "form_new_network": {
+                "title": "Naujo tinklo k\u016brimas"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Adapterio tipas"
@@ -100,6 +115,25 @@
             "maybe_reset_old_radio": {
                 "title": "Seno adapterio nustatymas i\u0161 naujo"
             },
+            "plug_in_new_radio": {
+                "description": "J\u016bs\u0173 naujas adapteris, esantis adresu ` {device_path} `, nerastas. \n Prijunkite j\u012f ir spustel\u0117kite Pateikti, kad t\u0119stum\u0117te.",
+                "title": "Naujas adapteris nerastas"
+            },
+            "plug_in_old_radio": {
+                "description": "J\u016bs\u0173 senas adapteris, esantis adresu ` {device_path} `, nerastas. Galite bandyti dar kart\u0105 j\u012f v\u0117l prijung\u0119 arba praleisti seno adapterio nustatym\u0105 i\u0161 naujo. \n \n **\u012esp\u0117jimas:** Jei praleisite seno adapterio nustatym\u0105 i\u0161 naujo, \u012fsitikinkite, kad jis lieka visam laikui atjungtas. V\u0117liau j\u012f v\u0117l prijungus, kils tinklo problem\u0173.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Pabandykite dar kart\u0105 prisijungti prie seno adapterio, kad j\u012f nustatytum\u0117te i\u0161 naujo kaip perk\u0117limo dal\u012f.",
+                    "skip_reset_old_radio": "Praleiskite senojo adapterio nustatym\u0173 atk\u016brim\u0105 ir t\u0119skite perk\u0117lim\u0105."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Bandyti dar kart\u0105",
+                    "skip_reset_old_radio": "Praleisti nustatymus i\u0161 naujo"
+                },
+                "title": "Senas adapteris nerastas"
+            },
+            "restore_backup": {
+                "title": "Tinklo atk\u016brimas naudojant nauj\u0105 adapter\u012f"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "\u012ekelti fail\u0105"
@@ -1858,6 +1892,11 @@
             "invalid_backup_json": "Netinkama atsargin\u0117 JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Formuojamas naujas Zigbee tinklas. \n \n \u0160io proceso metu ie\u0161kome laisvo tinklo kanalo, tai gali u\u017etrukti minut\u0119.",
+            "maybe_reset_old_radio": "Atkuriamas seno adapterio nustatymas. \n \n J\u016bs\u0173 seno adapterio atsargin\u0117 kopija sukurta ir atkuriami gamykliniai nustatymai.",
+            "restore_backup": "Tinklo nustatym\u0173 atk\u016brimas naujame adapteryje. \n \n Tai u\u017etruks minut\u0119."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1903,6 +1942,16 @@
                 "description": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105 savo Zigbee adapteriui",
                 "title": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Visam laikui pakeiskite adapterio IEEE adres\u0105"
+                },
+                "description": "J\u016bs\u0173 atsargin\u0117s kopijos IEEE adresas skiriasi nuo j\u016bs\u0173 adapterio IEEE adreso. Kad j\u016bs\u0173 tinklas tinkamai veikt\u0173, taip pat reik\u0117t\u0173 pakeisti adapterio IEEE adres\u0105. \n \n Tai yra nuolatinis veiksmas.",
+                "title": "Perra\u0161yti adapterio IEEE adres\u0105"
+            },
+            "form_new_network": {
+                "title": "Naujo tinklo k\u016brimas"
+            },
             "init": {
                 "description": "Bus sukurta atsargin\u0117 kopija ir ZHA bus sustabdyta. Ar norite t\u0119sti?",
                 "title": "I\u0161 naujo sukonfig\u016bruokite ZHA"
@@ -1927,6 +1976,25 @@
                 "description": "ZHA negal\u0117jo automati\u0161kai aptikti j\u016bs\u0173 adapterio nuosekliojo prievado nustatym\u0173. Paprastai tai yra programin\u0117s \u012frangos arba leidim\u0173 problema. \n \n Jei naudojate programin\u0119 \u012frang\u0105 su nestandartiniais nustatymais, \u012fveskite nuosekliojo prievado nustatymus.",
                 "title": "Nuosekliojo prievado nustatymai"
             },
+            "maybe_reset_old_radio": {
+                "title": "Seno adapterio nustatymas i\u0161 naujo"
+            },
+            "plug_in_new_radio": {
+                "description": "J\u016bs\u0173 naujas adapteris, esantis adresu ` {device_path} `, nerastas. \n Prijunkite j\u012f ir spustel\u0117kite Pateikti, kad t\u0119stum\u0117te.",
+                "title": "Naujas adapteris nerastas"
+            },
+            "plug_in_old_radio": {
+                "description": "J\u016bs\u0173 senas adapteris, esantis adresu ` {device_path} `, nerastas. Galite bandyti dar kart\u0105 j\u012f v\u0117l prijung\u0119 arba praleisti seno adapterio nustatym\u0105 i\u0161 naujo. \n \n **\u012esp\u0117jimas:** Jei praleisite seno adapterio nustatym\u0105 i\u0161 naujo, \u012fsitikinkite, kad jis lieka visam laikui atjungtas. V\u0117liau j\u012f v\u0117l prijungus, kils tinklo problem\u0173.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Pabandykite dar kart\u0105 prisijungti prie seno adapterio, kad j\u012f nustatytum\u0117te i\u0161 naujo kaip perk\u0117limo dal\u012f.",
+                    "skip_reset_old_radio": "Praleiskite senojo adapterio nustatym\u0173 atk\u016brim\u0105 ir t\u0119skite perk\u0117lim\u0105."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Bandyti dar kart\u0105",
+                    "skip_reset_old_radio": "Praleisti nustatymus i\u0161 naujo"
+                },
+                "title": "Senas adapteris nerastas"
+            },
             "prompt_migrate_or_reconfigure": {
                 "description": "Ar migruojate \u012f nauj\u0105 adapter\u012f, ar i\u0161 naujo konfig\u016bruojate dabartin\u012f adapter\u012f?",
                 "menu_option_descriptions": {
@@ -1939,6 +2007,9 @@
                 },
                 "title": "Perkelkite arba sukonfig\u016bruokite i\u0161 naujo"
             },
+            "restore_backup": {
+                "title": "Tinklo atk\u016brimas naudojant nauj\u0105 adapter\u012f"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "\u012ekelti fail\u0105"

homeassistant/components/zha/translations/mk.json

@@ -1,4 +1,9 @@
 {
+    "device_automation": {
+        "trigger_subtype": {
+            "button": "\u041a\u043e\u043f\u0447\u0435"
+        }
+    },
     "entity": {
         "number": {
             "antifrost_temperature": {
@@ -75,6 +80,9 @@
             "motor_thrust": {
                 "name": "\u041c\u043e\u0442\u043e\u0440\u0435\u043d \u043f\u043e\u0442\u0438\u0441\u043e\u043a"
             },
+            "preset_mode": {
+                "name": "\u041f\u0440\u0435\u0442\u0445\u043e\u0434\u043d\u043e \u043f\u043e\u0441\u0442\u0430\u0432\u0435\u043d \u0440\u0435\u0436\u0438\u043c"
+            },
             "reverse": {
                 "name": "\u041e\u0431\u0440\u0430\u0442\u043d\u043e"
             },
@@ -157,12 +165,43 @@
         }
     },
     "services": {
+        "permit": {
+            "fields": {
+                "duration": {
+                    "name": "\u0412\u0440\u0435\u043c\u0435\u0442\u0440\u0430\u0435\u045a\u0435"
+                }
+            }
+        },
         "set_lock_user_code": {
             "fields": {
                 "user_code": {
                     "name": "\u041a\u043e\u0434"
                 }
             }
+        },
+        "set_zigbee_cluster_attribute": {
+            "fields": {
+                "value": {
+                    "name": "\u0412\u0440\u0435\u0434\u043d\u043e\u0441\u0442"
+                }
+            }
+        },
+        "warning_device_squawk": {
+            "fields": {
+                "level": {
+                    "name": "\u041d\u0438\u0432\u043e"
+                }
+            }
+        },
+        "warning_device_warn": {
+            "fields": {
+                "duration": {
+                    "name": "\u0412\u0440\u0435\u043c\u0435\u0442\u0440\u0430\u0435\u045a\u0435"
+                },
+                "level": {
+                    "name": "\u041d\u0438\u0432\u043e"
+                }
+            }
         }
     }
 }

homeassistant/components/zha/translations/pl.json

@@ -126,6 +126,11 @@
                 "name": "Akcelerometr"
             }
         },
+        "button": {
+            "self_test": {
+                "name": "Auto-test"
+            }
+        },
         "climate": {
             "thermostat": {
                 "name": "Termostat"
@@ -167,7 +172,10 @@
                 "name": "Interwa\u0142 wykrywania"
             },
             "external_temperature_sensor": {
-                "name": "Zewn\u0119trzny sensor temperatury"
+                "name": "Temperatura zewn\u0119trznego sensora"
+            },
+            "external_temperature_sensor_value": {
+                "name": "Temperatura zewn\u0119trznego sensora"
             },
             "number": {
                 "name": "Liczba"
@@ -204,6 +212,9 @@
             "detection_distance": {
                 "name": "Odleg\u0142o\u015b\u0107 wykrywania"
             },
+            "external_temperature_sensor_type": {
+                "name": "Typ zewn\u0119trznego sensora temperatury"
+            },
             "feeding_mode": {
                 "name": "Tryb"
             },
@@ -232,6 +243,12 @@
             "rssi": {
                 "name": "RSSI"
             },
+            "self_test": {
+                "name": "Wynik auto-testu"
+            },
+            "self_test_result": {
+                "name": "Wynik auto-testu"
+            },
             "smoke_density": {
                 "name": "G\u0119sto\u015b\u0107 dymu"
             },
@@ -249,6 +266,9 @@
             "disable_led": {
                 "name": "Wy\u0142\u0105cz LED"
             },
+            "external_temperature_sensor": {
+                "name": "Zewn\u0119trzny sensor temperatury"
+            },
             "inverted": {
                 "name": "Odwr\u00f3cony"
             },
@@ -256,7 +276,10 @@
                 "name": "Wska\u017anik LED"
             },
             "prioritize_external_temperature_sensor": {
-                "name": "Nadaj priorytet zewn\u0119trznemu sensorowi temperatury"
+                "name": "Priorytet zewn\u0119trznego sensora temperatury"
+            },
+            "self_test_switch": {
+                "name": "Auto-test"
             },
             "switch": {
                 "name": "Prze\u0142\u0105cznik"