homeassistant 2025.11.0b2__py3-none-any.whl → 2025.11.0b5__py3-none-any.whl

homeassistant/components/zha/translations/de.json

@@ -16,6 +16,11 @@
             "invalid_backup_json": "Ung\u00fcltige Backup-JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Aufbau eines neuen Zigbee-Netzwerks.\n\nDabei wird nach einem freien Netzwerkkanal gesucht, was eine Minute dauern kann.",
+            "maybe_reset_old_radio": "Zur\u00fccksetzen des alten Adapters.\n\nDein alter Adapter wurde gesichert und wird nun auf die Werkseinstellungen zur\u00fcckgesetzt.",
+            "restore_backup": "Wiederherstellen der Netzwerkeinstellungen auf dem neuen Adapter.\n\nDies dauert eine Minute."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -76,8 +81,15 @@
             "confirm": {
                 "description": "M\u00f6chtest du {name} einrichten?"
             },
-            "confirm_hardware": {
-                "description": "M\u00f6chtest du {name} einrichten?"
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
+                },
+                "description": "Dein Backup hat eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte auch die IEEE-Adresse deines Adapters ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
+                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
+            },
+            "form_new_network": {
+                "title": "Bildung eines neuen Netzwerks"
             },
             "manual_pick_radio_type": {
                 "data": {
@@ -100,17 +112,28 @@
                 "description": "ZHA konnte die Einstellungen der seriellen Schnittstelle f\u00fcr deinen Adapter nicht automatisch erkennen. Dies liegt normalerweise an der Firmware oder den Berechtigungen.\n\nWenn du Firmware mit nicht standardm\u00e4\u00dfigen Einstellungen verwendest, gib die Einstellungen f\u00fcr die serielle Schnittstelle ein.",
                 "title": "Einstellungen der seriellen Schnittstelle"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
-                },
-                "description": "Dein Backup enth\u00e4lt eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte die IEEE-Adresse deines Adapters entsprechend ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
-                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
-            },
             "maybe_reset_old_radio": {
-                "description": "Zuvor wurde ein Backup erstellt und dein alter Adapter wird im Rahmen der Migration zur\u00fcckgesetzt.",
                 "title": "Alten Adapter zur\u00fccksetzen"
             },
+            "plug_in_new_radio": {
+                "description": "Dein neuer Adapter unter `{device_path}` wurde nicht gefunden. Bitte schlie\u00dfe ihn an und dr\u00fccke OK, um fortzufahren.",
+                "title": "Neuer Adapter nicht gefunden"
+            },
+            "plug_in_old_radio": {
+                "description": "Dein alter Adapter unter `{device_path}` wurde nicht gefunden. Du kannst es erneut versuchen, nachdem du ihn wieder eingesteckt hast, oder das Zur\u00fccksetzen des alten Adapters \u00fcberspringen.\n\n**Achtung:** Wenn du das Zur\u00fccksetzen des alten Adapters \u00fcberspringst, stelle sicher, dass er dauerhaft getrennt bleibt. Ein sp\u00e4teres Wiedereinstecken kann zu Netzwerkproblemen f\u00fchren.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Erneut versuchen, die Verbindung mit dem alten Adapter wiederherzustellen, um ihn im Rahmen der Migration zur\u00fcckzusetzen.",
+                    "skip_reset_old_radio": "Das Zur\u00fccksetzen des alten Adapters \u00fcberspringen und mit der Migration fortfahren."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Wiederholen",
+                    "skip_reset_old_radio": "Zur\u00fccksetzen \u00fcberspringen"
+                },
+                "title": "Alter Adapter nicht gefunden"
+            },
+            "restore_backup": {
+                "title": "Wiederherstellung des Netzwerks auf neuem Adapter"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Datei hochladen"
@@ -1869,6 +1892,11 @@
             "invalid_backup_json": "Ung\u00fcltige Backup-JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Aufbau eines neuen Zigbee-Netzwerks.\n\nDabei wird nach einem freien Netzwerkkanal gesucht, was eine Minute dauern kann.",
+            "maybe_reset_old_radio": "Zur\u00fccksetzen des alten Adapters.\n\nDein alter Adapter wurde gesichert und wird nun auf die Werkseinstellungen zur\u00fcckgesetzt.",
+            "restore_backup": "Wiederherstellen der Netzwerkeinstellungen auf dem neuen Adapter.\n\nDies dauert eine Minute."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1914,6 +1942,16 @@
                 "description": "W\u00e4hle den seriellen Anschluss f\u00fcr deinen Zigbee-Adapter",
                 "title": "Auswahl des seriellen Ports"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
+                },
+                "description": "Dein Backup hat eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte auch die IEEE-Adresse deines Adapters ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
+                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
+            },
+            "form_new_network": {
+                "title": "Bildung eines neuen Netzwerks"
+            },
             "init": {
                 "description": "Es wird ein Backup durchgef\u00fchrt und ZHA wird gestoppt. M\u00f6chtest du fortfahren?",
                 "title": "ZHA rekonfigurieren"
@@ -1938,12 +1976,24 @@
                 "description": "ZHA konnte die Einstellungen der seriellen Schnittstelle f\u00fcr deinen Adapter nicht automatisch erkennen. Dies liegt normalerweise an der Firmware oder den Berechtigungen.\n\nWenn du Firmware mit nicht standardm\u00e4\u00dfigen Einstellungen verwendest, gib die Einstellungen f\u00fcr die serielle Schnittstelle ein.",
                 "title": "Einstellungen der seriellen Schnittstelle"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
+            "maybe_reset_old_radio": {
+                "title": "Alten Adapter zur\u00fccksetzen"
+            },
+            "plug_in_new_radio": {
+                "description": "Dein neuer Adapter unter `{device_path}` wurde nicht gefunden. Bitte schlie\u00dfe ihn an und dr\u00fccke OK, um fortzufahren.",
+                "title": "Neuer Adapter nicht gefunden"
+            },
+            "plug_in_old_radio": {
+                "description": "Dein alter Adapter unter `{device_path}` wurde nicht gefunden. Du kannst es erneut versuchen, nachdem du ihn wieder eingesteckt hast, oder das Zur\u00fccksetzen des alten Adapters \u00fcberspringen.\n\n**Achtung:** Wenn du das Zur\u00fccksetzen des alten Adapters \u00fcberspringst, stelle sicher, dass er dauerhaft getrennt bleibt. Ein sp\u00e4teres Wiedereinstecken kann zu Netzwerkproblemen f\u00fchren.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Erneut versuchen, die Verbindung mit dem alten Adapter wiederherzustellen, um ihn im Rahmen der Migration zur\u00fcckzusetzen.",
+                    "skip_reset_old_radio": "Das Zur\u00fccksetzen des alten Adapters \u00fcberspringen und mit der Migration fortfahren."
                 },
-                "description": "Dein Backup enth\u00e4lt eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte die IEEE-Adresse deines Adapters entsprechend ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
-                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
+                "menu_options": {
+                    "retry_old_radio": "Wiederholen",
+                    "skip_reset_old_radio": "Zur\u00fccksetzen \u00fcberspringen"
+                },
+                "title": "Alter Adapter nicht gefunden"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Stellst du auf einen neuen Adapter um oder konfigurierst du den aktuellen Adapter neu?",
@@ -1957,6 +2007,9 @@
                 },
                 "title": "Migrieren oder neu konfigurieren"
             },
+            "restore_backup": {
+                "title": "Wiederherstellung des Netzwerks auf neuem Adapter"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Datei hochladen"

homeassistant/components/zha/translations/el.json

@@ -42,9 +42,6 @@
             "confirm": {
                 "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf {name};"
             },
-            "confirm_hardware": {
-                "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf {name};"
-            },
             "manual_port_config": {
                 "data": {
                     "path": "\u0394\u03b9\u03b1\u03b4\u03c1\u03bf\u03bc\u03ae \u03c3\u03b5\u03b9\u03c1\u03b9\u03b1\u03ba\u03ae\u03c2 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae\u03c2"

homeassistant/components/zha/translations/en-GB.json

@@ -76,9 +76,6 @@
             "confirm": {
                 "description": "Do you want to set up {name}?"
             },
-            "confirm_hardware": {
-                "description": "Do you want to set up {name}?"
-            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Adapter type"
@@ -100,15 +97,7 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with non-standard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
             "maybe_reset_old_radio": {
-                "description": "A backup was created earlier and your old adapter is being reset as part of the migration.",
                 "title": "Resetting old adapter"
             },
             "upload_manual_backup": {
@@ -1938,13 +1927,6 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with non-standard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
             "prompt_migrate_or_reconfigure": {
                 "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
                 "menu_option_descriptions": {

homeassistant/components/zha/translations/en.json

@@ -16,6 +16,11 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
+            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
+            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -76,8 +81,15 @@
             "confirm": {
                 "description": "Do you want to set up {name}?"
             },
-            "confirm_hardware": {
-                "description": "Do you want to set up {name}?"
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
+                },
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
+            },
+            "form_new_network": {
+                "title": "Forming new network"
             },
             "manual_pick_radio_type": {
                 "data": {
@@ -100,17 +112,28 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
             "maybe_reset_old_radio": {
-                "description": "A backup was created earlier and your old adapter is being reset as part of the migration.",
                 "title": "Resetting old adapter"
             },
+            "plug_in_new_radio": {
+                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
+                "title": "New adapter not found"
+            },
+            "plug_in_old_radio": {
+                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
+                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Retry",
+                    "skip_reset_old_radio": "Skip reset"
+                },
+                "title": "Old adapter not found"
+            },
+            "restore_backup": {
+                "title": "Restoring network to new adapter"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Upload a file"
@@ -1869,6 +1892,11 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
+        "progress": {
+            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
+            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
+            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
+        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1914,6 +1942,16 @@
                 "description": "Select the serial port for your Zigbee adapter",
                 "title": "Select a serial port"
             },
+            "confirm_ezsp_ieee_overwrite": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
+                },
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
+            },
+            "form_new_network": {
+                "title": "Forming new network"
+            },
             "init": {
                 "description": "A backup will be performed and ZHA will be stopped. Do you wish to continue?",
                 "title": "Reconfigure ZHA"
@@ -1938,12 +1976,24 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
+            "maybe_reset_old_radio": {
+                "title": "Resetting old adapter"
+            },
+            "plug_in_new_radio": {
+                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
+                "title": "New adapter not found"
+            },
+            "plug_in_old_radio": {
+                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
+                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
                 },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
+                "menu_options": {
+                    "retry_old_radio": "Retry",
+                    "skip_reset_old_radio": "Skip reset"
+                },
+                "title": "Old adapter not found"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
@@ -1957,6 +2007,9 @@
                 },
                 "title": "Migrate or re-configure"
             },
+            "restore_backup": {
+                "title": "Restoring network to new adapter"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Upload a file"

homeassistant/components/zha/translations/es.json

@@ -76,9 +76,6 @@
             "confirm": {
                 "description": "\u00bfQuieres configurar {name} ?"
             },
-            "confirm_hardware": {
-                "description": "\u00bfQuieres configurar {name}?"
-            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Tipo de adaptador"
@@ -100,17 +97,25 @@
                 "description": "ZHA no pudo detectar autom\u00e1ticamente la configuraci\u00f3n del puerto serie de tu adaptador. Esto suele deberse a un problema con el firmware o los permisos. \n \nSi utilizas un firmware con una configuraci\u00f3n no est\u00e1ndar, introduce la configuraci\u00f3n del puerto serie.",
                 "title": "Configuraci\u00f3n del puerto serie"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Reemplazar permanentemente la direcci\u00f3n IEEE del adaptador"
-                },
-                "description": "Tu copia de seguridad tiene una direcci\u00f3n IEEE diferente a la de tu adaptador. Para que tu red funcione correctamente, tambi\u00e9n debes cambiar la direcci\u00f3n IEEE de tu adaptador. \n \nEsta operaci\u00f3n es permanente.",
-                "title": "Sobrescribir la direcci\u00f3n IEEE del adaptador"
-            },
             "maybe_reset_old_radio": {
-                "description": "Se cre\u00f3 una copia de seguridad anteriormente y tu antiguo adaptador se est\u00e1 restableciendo como parte de la migraci\u00f3n.",
                 "title": "Restablecer el adaptador antiguo"
             },
+            "plug_in_new_radio": {
+                "description": "No se encontr\u00f3 el nuevo adaptador en `{device_path}`. Por favor, con\u00e9ctalo y haz clic en Enviar para continuar.",
+                "title": "No se encontr\u00f3 el nuevo adaptador."
+            },
+            "plug_in_old_radio": {
+                "description": "No se encontr\u00f3 tu adaptador antiguo `{device_path}`. Puedes intentarlo de nuevo despu\u00e9s de volver a conectarlo, o bien, no reiniciar el adaptador anterior.\n\n**Advertencia:** Si no reinicias el adaptador anterior, aseg\u00farate de que permanezca desconectado permanentemente. Volver a conectarlo m\u00e1s tarde causar\u00e1 problemas de red.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Vuelve a intentar conectarse al adaptador antiguo para restablecerlo como parte de la migraci\u00f3n.",
+                    "skip_reset_old_radio": "Omite el restablecimiento del adaptador antiguo y contin\u00faa con la migraci\u00f3n."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Volver a intentar",
+                    "skip_reset_old_radio": "Omitir restablecimiento"
+                },
+                "title": "No se encontr\u00f3 el adaptador antiguo"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Subir un archivo"
@@ -207,7 +212,10 @@
             "remote_button_quintuple_press": "\"{subtype}\" pulsado cinco veces",
             "remote_button_short_press": "\"{subtype}\" pulsado",
             "remote_button_short_release": "\"{subtype}\" soltado",
-            "remote_button_triple_press": "\"{subtype}\" pulsado tres veces"
+            "remote_button_triple_press": "\"{subtype}\" pulsado tres veces",
+            "rotary_knob_continued_rotating": "El mando giratorio sigui\u00f3 girando \"{subtype}\"",
+            "rotary_knob_started_rotating": "El mando giratorio comenz\u00f3 a girar \"{subtype}\"",
+            "rotary_knob_stopped_rotating": "\"{subtype}\" dej\u00f3 de girar"
         }
     },
     "entity": {
@@ -306,6 +314,9 @@
             "calibrate_valve": {
                 "name": "Calibrar v\u00e1lvula"
             },
+            "calibrate_z_axis": {
+                "name": "Calibrar eje Z"
+            },
             "feed": {
                 "name": "Alimentar"
             },
@@ -324,6 +335,12 @@
             "reset_summation_delivered": {
                 "name": "Restablecimiento de la suma entregada"
             },
+            "reset_summation_delivered_left": {
+                "name": "Se ha entregado la suma izquierda de restablecimiento"
+            },
+            "reset_summation_delivered_right": {
+                "name": "Se ha entregado la suma derecha de restablecimiento"
+            },
             "restart_device": {
                 "name": "Reiniciar dispositivo"
             },
@@ -338,7 +355,7 @@
         },
         "cover": {
             "cover": {
-                "name": "Cubierta"
+                "name": "Persiana"
             },
             "keen_vent": {
                 "name": "Respiradero Keen"
@@ -465,6 +482,9 @@
             "comfort_temperature_min": {
                 "name": "Temperatura de confort m\u00ednima"
             },
+            "compensation_speed": {
+                "name": "Velocidad de compensaci\u00f3n"
+            },
             "deadzone_temperature": {
                 "name": "Temperatura de la zona muerta"
             },
@@ -624,6 +644,9 @@
             "lift_drive_up_time": {
                 "name": "Tiempo de subida del ascensor"
             },
+            "limit_position": {
+                "name": "Posici\u00f3n l\u00edmite"
+            },
             "liquid_depth_max": {
                 "name": "Altura desde el sensor hasta el nivel del l\u00edquido"
             },
@@ -720,6 +743,9 @@
             "on_transition_time": {
                 "name": "Tiempo de transici\u00f3n a encendido"
             },
+            "open_delay_time": {
+                "name": "Tiempo de retardo de apertura"
+            },
             "open_window_detection_guard_period": {
                 "name": "Periodo de protecci\u00f3n de detecci\u00f3n de ventana abierta"
             },
@@ -747,6 +773,9 @@
             "presence_timeout": {
                 "name": "Tiempo de fundido"
             },
+            "pulse_configuration": {
+                "name": "Configuraci\u00f3n de pulsos"
+            },
             "quantitative_watering": {
                 "name": "Riego cuantitativo"
             },
@@ -855,6 +884,24 @@
             "transmit_power": {
                 "name": "Potencia de transmisi\u00f3n"
             },
+            "turn_off_delay": {
+                "name": "Desactivar retardo"
+            },
+            "turn_off_delay_left": {
+                "name": "Desactivar retardo a la izquierda"
+            },
+            "turn_off_delay_right": {
+                "name": "Desactivar retardo a la derecha"
+            },
+            "turn_on_delay": {
+                "name": "Activar retardo"
+            },
+            "turn_on_delay_left": {
+                "name": "Activar retardo a la izquierda"
+            },
+            "turn_on_delay_right": {
+                "name": "Activar retardo a la derecha"
+            },
             "up_movement": {
                 "name": "Movimiento ascendente"
             },
@@ -1531,7 +1578,7 @@
                 "name": "Peso dispensado hoy"
             },
             "window_covering_type": {
-                "name": "Tipo de cubierta de ventana"
+                "name": "Tipo de persiana de ventana"
             }
         },
         "switch": {
@@ -1592,6 +1639,9 @@
             "double_up_full": {
                 "name": "Doble toque en - completo"
             },
+            "enable_pir_mode": {
+                "name": "Habilitar PIR remoto"
+            },
             "enable_siren": {
                 "name": "Habilitar sirena"
             },
@@ -1613,6 +1663,9 @@
             "firmware_progress_led": {
                 "name": "LED de progreso del firmware"
             },
+            "flip_indicator_light": {
+                "name": "Luz indicadora de encendido"
+            },
             "frient_com_1": {
                 "name": "COM 1"
             },
@@ -1890,12 +1943,21 @@
                 "description": "ZHA no pudo detectar autom\u00e1ticamente la configuraci\u00f3n del puerto serie de tu adaptador. Esto suele deberse a un problema con el firmware o los permisos. \n \nSi utilizas un firmware con una configuraci\u00f3n no est\u00e1ndar, introduce la configuraci\u00f3n del puerto serie.",
                 "title": "Configuraci\u00f3n del puerto serie"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Reemplazar permanentemente la direcci\u00f3n IEEE del adaptador"
+            "plug_in_new_radio": {
+                "description": "No se encontr\u00f3 el nuevo adaptador en `{device_path}`. Por favor, con\u00e9ctalo y haz clic en Enviar para continuar.",
+                "title": "No se encontr\u00f3 el nuevo adaptador."
+            },
+            "plug_in_old_radio": {
+                "description": "No se encontr\u00f3 tu adaptador antiguo `{device_path}`. Puedes intentarlo de nuevo despu\u00e9s de volver a conectarlo, o bien, no reiniciar el adaptador anterior.\n\n**Advertencia:** Si no reinicias el adaptador anterior, aseg\u00farate de que permanezca desconectado permanentemente. Volver a conectarlo m\u00e1s tarde causar\u00e1 problemas de red.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Vuelve a intentar conectarse al adaptador antiguo para restablecerlo como parte de la migraci\u00f3n.",
+                    "skip_reset_old_radio": "Omite el restablecimiento del adaptador antiguo y contin\u00faa con la migraci\u00f3n."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Volver a intentar",
+                    "skip_reset_old_radio": "Omitir restablecimiento"
                 },
-                "description": "Tu copia de seguridad tiene una direcci\u00f3n IEEE diferente a la de tu adaptador. Para que tu red funcione correctamente, tambi\u00e9n debes cambiar la direcci\u00f3n IEEE de tu adaptador. \n \nEsta operaci\u00f3n es permanente.",
-                "title": "Sobrescribir la direcci\u00f3n IEEE del adaptador"
+                "title": "No se encontr\u00f3 el adaptador antiguo"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "\u00bfEst\u00e1s migrando a un nuevo adaptador o volviendo a configurar el adaptador actual?",

homeassistant/components/zha/translations/et.json

@@ -76,9 +76,6 @@
             "confirm": {
                 "description": "Kas soovid seadistada teenust {name} ?"
             },
-            "confirm_hardware": {
-                "description": "Kas seadistada {name} ?"
-            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Adapteri t\u00fc\u00fcp"
@@ -100,17 +97,25 @@
                 "description": "ZHA ei suutnud adapteri jadapordi s\u00e4tteid automaatselt tuvastada. Tavaliselt on see p\u00fcsivara v\u00f5i lubade probleem. \n \n Kui kasutad p\u00fcsivara mittestandardsete s\u00e4tetega, sisesta jadapordi s\u00e4tted.",
                 "title": "Jadapordi s\u00e4tted"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Adapteri IEEE-aadressi p\u00fcsiv asendamine"
-                },
-                "description": "Varukoopial on erinev IEEE aadress kui adapteril.  V\u00f5rgu n\u00f5uetekohaseks toimimiseks tuleks muuta ka adapteri IEEE aadressi.\n\nSee on p\u00fcsiv toiming.",
-                "title": "Adapteri IEEE aadressi \u00fclekirjutamine"
-            },
             "maybe_reset_old_radio": {
-                "description": "Varukoopia loodi varem ja vana adapter l\u00e4htestatakse migreerimise k\u00e4igus.",
                 "title": "Vana adapteri l\u00e4htestamine"
             },
+            "plug_in_new_radio": {
+                "description": "Uut adapterit aadressil `{device_path}` ei leitud. \u00dchenda see ja j\u00e4tkamiseks kl\u00f5psa nuppu Submit.",
+                "title": "Uut adapterit ei leitud"
+            },
+            "plug_in_old_radio": {
+                "description": "Vana adapterit aadressil \"{device_path}\" ei leitud. V\u00f5id uuesti proovida p\u00e4rast selle uuesti \u00fchendamist v\u00f5i j\u00e4tta vana adapteri l\u00e4htestamise vahele. **Hoiatus:** Kui j\u00e4tad vana adapteri l\u00e4htestamise vahele, veendu, et see j\u00e4\u00e4b p\u00fcsivalt lahti\u00fchendatuks. Selle uuesti \u00fchendamine p\u00f5hjustab hiljem v\u00f5rguprobleeme.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Proovi vana adapteriga uuesti \u00fchendust luua, et see migreerimise osana l\u00e4htestada.",
+                    "skip_reset_old_radio": "J\u00e4ta vana adapteri l\u00e4htestamine vahele ja j\u00e4tka migreerimisega."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Proovi uuesti",
+                    "skip_reset_old_radio": "J\u00e4ta l\u00e4htestamine vahele"
+                },
+                "title": "Vana adapterit ei leitud"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Faili \u00fcleslaadimine"
@@ -1938,12 +1943,21 @@
                 "description": "Sisesta jadapordi s\u00e4tted",
                 "title": "Jadapordi s\u00e4tted"
             },
-            "maybe_confirm_ezsp_restore": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Asenda IEEE aadress j\u00e4\u00e4davalt"
+            "plug_in_new_radio": {
+                "description": "Uut adapterit aadressil `{device_path}` ei leitud. \u00dchenda see ja j\u00e4tkamiseks kl\u00f5psa nuppu Submit.",
+                "title": "Uut adapterit ei leitud"
+            },
+            "plug_in_old_radio": {
+                "description": "Vana adapterit aadressil \"{device_path}\" ei leitud. V\u00f5id uuesti proovida p\u00e4rast selle uuesti \u00fchendamist v\u00f5i j\u00e4tta vana adapteri l\u00e4htestamise vahele. **Hoiatus:** Kui j\u00e4tad vana adapteri l\u00e4htestamise vahele, veendu, et see j\u00e4\u00e4b p\u00fcsivalt lahti\u00fchendatuks. Selle uuesti \u00fchendamine p\u00f5hjustab hiljem v\u00f5rguprobleeme.",
+                "menu_option_descriptions": {
+                    "retry_old_radio": "Proovi vana adapteriga uuesti \u00fchendust luua, et see migreerimise osana l\u00e4htestada.",
+                    "skip_reset_old_radio": "J\u00e4ta vana adapteri l\u00e4htestamine vahele ja j\u00e4tka migreerimisega."
+                },
+                "menu_options": {
+                    "retry_old_radio": "Proovi uuesti",
+                    "skip_reset_old_radio": "J\u00e4ta l\u00e4htestamine vahele"
                 },
-                "description": "Varukoopial on erinev IEEE aadress kui adapteril.  V\u00f5rgu n\u00f5uetekohaseks toimimiseks tuleks muuta ka adapteri IEEE aadressi.\n\nSee on p\u00fcsiv toiming.",
-                "title": "Kirjuta IEEE aadress \u00fcle"
+                "title": "Vana adapterit ei leitud"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Kas l\u00e4hed \u00fcle uuele adapterile v\u00f5i seadistad praegust adapterit \u00fcmber?",

homeassistant/components/zha/translations/fi.json

@@ -27,9 +27,6 @@
             "confirm": {
                 "description": "Haluatko m\u00e4\u00e4ritt\u00e4\u00e4 {name}?"
             },
-            "confirm_hardware": {
-                "description": "Haluatko m\u00e4\u00e4ritt\u00e4\u00e4 {name}?"
-            },
             "manual_port_config": {
                 "data": {
                     "path": "Sarjalaitteen polku"