hillclimber 0.1.6__cp314-cp314t-manylinux_2_27_aarch64.manylinux_2_28_aarch64.whl

hillclimber/opes.py

@@ -0,0 +1,359 @@
+"""OPES (On-the-fly Probability Enhanced Sampling) methods.
+
+This module provides classes for OPES enhanced sampling, a modern alternative
+to traditional metadynamics with improved convergence properties.
+"""
+
+import dataclasses
+from pathlib import Path
+
+import ase.units
+import zntrack
+
+from hillclimber.calc import NonOverwritingPlumed
+from hillclimber.interfaces import (
+    CollectiveVariable,
+    NodeWithCalculator,
+    PlumedGenerator,
+)
+
+
+@dataclasses.dataclass
+class OPESBias:
+    """OPES bias configuration for a collective variable.
+
+    Parameters
+    ----------
+    cv : CollectiveVariable
+        The collective variable to bias.
+    sigma : float | str, optional
+        Initial kernel width in CV units (e.g., Å for distances, radians for angles).
+        Use "ADAPTIVE" for automatic adaptation (recommended).
+        If numeric, specifies the initial width.
+        Default: "ADAPTIVE".
+
+    Resources
+    ---------
+    - https://www.plumed.org/doc-master/user-doc/html/OPES_METAD/
+
+    Notes
+    -----
+    The ADAPTIVE sigma option automatically adjusts kernel widths based on
+    CV fluctuations, which is usually the best choice. The automatic width
+    is measured every ADAPTIVE_SIGMA_STRIDE steps (default: 10×PACE).
+    """
+
+    cv: CollectiveVariable
+    sigma: float | str = "ADAPTIVE"
+
+
+@dataclasses.dataclass
+class OPESConfig:
+    """Configuration for OPES_METAD and OPES_METAD_EXPLORE.
+
+    OPES (On-the-fly Probability Enhanced Sampling) is a modern enhanced
+    sampling method that samples well-tempered target distributions.
+
+    Units
+    -----
+    hillclimber uses ASE units throughout. The UNITS line in the PLUMED input tells
+    PLUMED to interpret all values in ASE units:
+    - Distances: Ångström (Å)
+    - Energies: electronvolt (eV) - including BARRIER, SIGMA_MIN, etc.
+    - Time: femtoseconds (fs)
+    - Temperature: Kelvin (K)
+
+    Parameters
+    ----------
+    barrier : float
+        Highest free energy barrier to overcome (eV). This is the key
+        parameter that determines sampling efficiency.
+    pace : int, optional
+        Frequency of kernel deposition in MD steps (default: 500).
+    temp : float, optional
+        Temperature in Kelvin (default: 300.0). If -1, retrieved from MD engine.
+    explore_mode : bool, optional
+        If True, uses OPES_METAD_EXPLORE which estimates target distribution
+        directly (better exploration, slower reweighting convergence).
+        If False, uses OPES_METAD which estimates unbiased distribution
+        (faster convergence, less exploration). Default: False.
+    biasfactor : float, optional
+        Well-tempered gamma factor. If not specified, uses default behavior.
+        Set to inf for custom target distributions.
+    compression_threshold : float, optional
+        Merge kernels if closer than this threshold in sigma units (default: 1.0).
+    file : str, optional
+        File to store deposited kernels (default: "KERNELS").
+    adaptive_sigma_stride : int, optional
+        MD steps between adaptive sigma measurements. If not set, uses 10×PACE.
+    sigma_min : float, optional
+        Minimum allowable sigma value for adaptive sigma in CV units.
+    state_wfile : str, optional
+        State file for writing exact restart information.
+    state_rfile : str, optional
+        State file for reading restart information.
+    state_wstride : int, optional
+        Frequency of STATE file writing in number of kernel depositions.
+    walkers_mpi : bool, optional
+        Enable multiple walker mode with MPI communication (default: False).
+    calc_work : bool, optional
+        Calculate and output accumulated work (default: False).
+    flush : int, optional
+        Frequency of flushing output files in MD steps.
+
+    Resources
+    ---------
+    - https://www.plumed.org/doc-master/user-doc/html/OPES_METAD/
+    - https://www.plumed.org/doc-master/user-doc/html/OPES_METAD_EXPLORE/
+    - Invernizzi & Parrinello, J. Phys. Chem. Lett. 2020
+
+    Notes
+    -----
+    **When to use OPES_METAD vs OPES_METAD_EXPLORE:**
+
+    - OPES_METAD: Use when you want quick convergence of reweighted free energy.
+      Estimates unbiased distribution P(s).
+
+    - OPES_METAD_EXPLORE: Use for systems with unknown barriers or when testing
+      new CVs. Allows more exploration but slower reweighting convergence.
+      Estimates target distribution p^WT(s) directly.
+
+    Both methods converge to the same bias given enough time, but approach it
+    differently. OPES is more sensitive to degenerate CVs than standard METAD.
+    """
+
+    barrier: float  # kJ/mol
+    pace: int = 500
+    temp: float = 300.0
+    explore_mode: bool = False  # False=OPES_METAD, True=OPES_METAD_EXPLORE
+    biasfactor: float | None = None
+    compression_threshold: float = 1.0
+    file: str = "KERNELS"
+    adaptive_sigma_stride: int | None = None
+    sigma_min: float | None = None
+    state_wfile: str | None = None
+    state_rfile: str | None = None
+    state_wstride: int | None = None
+    walkers_mpi: bool = False
+    calc_work: bool = False
+    flush: int | None = None
+
+
+class OPESModel(zntrack.Node, NodeWithCalculator):
+    """OPES (On-the-fly Probability Enhanced Sampling) model.
+
+    Implements OPES_METAD and OPES_METAD_EXPLORE enhanced sampling methods.
+    OPES samples well-tempered target distributions and provides better
+    convergence properties than traditional metadynamics.
+
+    Parameters
+    ----------
+    config : OPESConfig
+        Configuration for the OPES simulation.
+    data : list[ase.Atoms]
+        Input data for simulation.
+    data_idx : int, optional
+        Index of data to use (default: -1).
+    bias_cvs : list[OPESBias], optional
+        Collective variables to bias (default: []).
+    actions : list[PlumedGenerator], optional
+        Additional actions like restraints, walls, print (default: []).
+    timestep : float, optional
+        Timestep in fs (default: 1.0).
+    model : NodeWithCalculator
+        Underlying force field model.
+
+    Examples
+    --------
+    >>> import hillclimber as hc
+    >>>
+    >>> # Define collective variables
+    >>> phi = hc.TorsionCV(...)
+    >>> psi = hc.TorsionCV(...)
+    >>>
+    >>> # OPES configuration (standard mode)
+    >>> config = hc.OPESConfig(
+    ...     barrier=40.0,  # kJ/mol
+    ...     pace=500,
+    ...     temp=300.0,
+    ...     explore_mode=False  # Use OPES_METAD
+    ... )
+    >>>
+    >>> # Bias configuration with adaptive sigma
+    >>> bias1 = hc.OPESBias(cv=phi, sigma="ADAPTIVE")
+    >>> bias2 = hc.OPESBias(cv=psi, sigma="ADAPTIVE")
+    >>>
+    >>> # Create OPES model
+    >>> opes = hc.OPESModel(
+    ...     config=config,
+    ...     bias_cvs=[bias1, bias2],
+    ...     data=data.frames,
+    ...     model=force_field,
+    ...     timestep=0.5
+    ... )
+    >>>
+    >>> # For exploration mode, set explore_mode=True
+    >>> explore_config = hc.OPESConfig(
+    ...     barrier=40.0,
+    ...     pace=500,
+    ...     explore_mode=True  # Use OPES_METAD_EXPLORE
+    ... )
+
+    Resources
+    ---------
+    - https://www.plumed.org/doc-master/user-doc/html/OPES_METAD/
+    - https://www.plumed.org/doc-master/user-doc/html/OPES_METAD_EXPLORE/
+    - https://www.plumed.org/doc-master/user-doc/html/masterclass-22-03.html
+    - Invernizzi & Parrinello, J. Phys. Chem. Lett. 2020
+
+    Notes
+    -----
+    **Output Components:**
+    OPES provides several diagnostic outputs (accessible via PrintAction):
+    - opes.bias: Instantaneous bias potential value
+    - opes.rct: Convergence indicator (should flatten at convergence)
+    - opes.zed: Normalization estimate (should stabilize)
+    - opes.neff: Effective sample size
+    - opes.nker: Number of compressed kernels
+    - opes.work: Accumulated work (if calc_work=True)
+
+    **Advantages over Metadynamics:**
+    - Better convergence properties
+    - Automatic variance adaptation
+    - Lower systematic error
+    - More sensitive to degenerate CVs (helps identify CV problems)
+    """
+
+    config: OPESConfig = zntrack.deps()
+    data: list[ase.Atoms] = zntrack.deps()
+    data_idx: int = zntrack.params(-1)
+    bias_cvs: list[OPESBias] = zntrack.deps(default_factory=list)
+    actions: list[PlumedGenerator] = zntrack.deps(default_factory=list)
+    timestep: float = zntrack.params(1.0)
+    model: NodeWithCalculator = zntrack.deps()
+
+    figures: Path = zntrack.outs_path(zntrack.nwd / "figures", independent=True)
+
+    def run(self):
+        self.figures.mkdir(parents=True, exist_ok=True)
+        for cv in self.bias_cvs:
+            img = cv.cv.get_img(self.data[self.data_idx])
+            img.save(self.figures / f"{cv.cv.prefix}.png")
+
+    def get_calculator(
+        self, *, directory: str | Path | None = None, **kwargs
+    ) -> NonOverwritingPlumed:
+        if directory is None:
+            raise ValueError("Directory must be specified for PLUMED input files.")
+        directory = Path(directory)
+        directory.mkdir(parents=True, exist_ok=True)
+
+        lines = self.to_plumed(self.data[self.data_idx])
+        # replace FILE= with f"FILE={directory}/" inside config
+        lines = [line.replace("FILE=", f"FILE={directory}/") for line in lines]
+
+        # Write plumed input file
+        with (directory / "plumed.dat").open("w") as file:
+            for line in lines:
+                file.write(line + "\n")
+
+        kT = ase.units.kB * self.config.temp
+
+        return NonOverwritingPlumed(
+            calc=self.model.get_calculator(directory=directory),
+            atoms=self.data[self.data_idx],
+            input=lines,
+            timestep=float(self.timestep * ase.units.fs),
+            kT=float(kT),
+            log=(directory / "plumed.log").as_posix(),
+        )
+
+    def to_plumed(self, atoms: ase.Atoms) -> list[str]:
+        """Generate PLUMED input string for the OPES model."""
+        # check for duplicate CV prefixes
+        cv_labels = set()
+        for bias_cv in self.bias_cvs:
+            if bias_cv.cv.prefix in cv_labels:
+                raise ValueError(f"Duplicate CV prefix found: {bias_cv.cv.prefix}")
+            cv_labels.add(bias_cv.cv.prefix)
+
+        plumed_lines = []
+        all_labels = []
+
+        sigmas = []
+
+        # PLUMED UNITS line specifies conversion factors from ASE units to PLUMED's native units:
+        # - LENGTH=A: ASE uses Ångström (A), PLUMED native is nm → A is a valid PLUMED unit
+        # - TIME: ASE uses fs, PLUMED native is ps → 1 fs = 0.001 ps
+        # - ENERGY: ASE uses eV, PLUMED native is kJ/mol → 1 eV = 96.485 kJ/mol
+        # See: https://www.plumed.org/doc-master/user-doc/html/ (MD engine integration docs)
+        plumed_lines.append(
+            f"UNITS LENGTH=A TIME={1 / 1000} ENERGY={ase.units.mol / ase.units.kJ}"
+        )
+
+        for bias_cv in self.bias_cvs:
+            labels, cv_str = bias_cv.cv.to_plumed(atoms)
+            plumed_lines.extend(cv_str)
+            all_labels.extend(labels)
+
+            # Collect sigma values
+            if isinstance(bias_cv.sigma, str):
+                sigmas.append(bias_cv.sigma)
+            else:
+                sigmas.append(str(bias_cv.sigma))
+
+        # Determine which OPES method to use
+        method_name = "OPES_METAD_EXPLORE" if self.config.explore_mode else "OPES_METAD"
+
+        # Build OPES command
+        opes_parts = [
+            f"opes: {method_name}",
+            f"ARG={','.join(all_labels)}",
+            f"PACE={self.config.pace}",
+            f"BARRIER={self.config.barrier}",
+            f"TEMP={self.config.temp}",
+        ]
+
+        # Add SIGMA (required parameter)
+        # If all sigmas are the same, use single value; otherwise comma-separated
+        if len(set(sigmas)) == 1:
+            opes_parts.append(f"SIGMA={sigmas[0]}")
+        else:
+            opes_parts.append(f"SIGMA={','.join(sigmas)}")
+
+        # Add FILE and COMPRESSION_THRESHOLD
+        opes_parts.append(f"FILE={self.config.file}")
+        opes_parts.append(f"COMPRESSION_THRESHOLD={self.config.compression_threshold}")
+
+        # Optional parameters
+        if self.config.biasfactor is not None:
+            opes_parts.append(f"BIASFACTOR={self.config.biasfactor}")
+        if self.config.adaptive_sigma_stride is not None:
+            opes_parts.append(
+                f"ADAPTIVE_SIGMA_STRIDE={self.config.adaptive_sigma_stride}"
+            )
+        if self.config.sigma_min is not None:
+            opes_parts.append(f"SIGMA_MIN={self.config.sigma_min}")
+        if self.config.state_wfile is not None:
+            opes_parts.append(f"STATE_WFILE={self.config.state_wfile}")
+        if self.config.state_rfile is not None:
+            opes_parts.append(f"STATE_RFILE={self.config.state_rfile}")
+        if self.config.state_wstride is not None:
+            opes_parts.append(f"STATE_WSTRIDE={self.config.state_wstride}")
+        if self.config.walkers_mpi:
+            opes_parts.append("WALKERS_MPI")
+        if self.config.calc_work:
+            opes_parts.append("CALC_WORK")
+
+        plumed_lines.append(" ".join(opes_parts))
+
+        # Add any additional actions (restraints, walls, print actions, etc.)
+        for action in self.actions:
+            action_lines = action.to_plumed(atoms)
+            plumed_lines.extend(action_lines)
+
+        # Add FLUSH if configured
+        if self.config.flush is not None:
+            plumed_lines.append(f"FLUSH STRIDE={self.config.flush}")
+
+        return plumed_lines