esphome 2025.6.3__py3-none-any.whl → 2025.7.0__py3-none-any.whl

esphome/components/esp32_touch/esp32_touch.cpp

@@ -1,355 +0,0 @@
-#ifdef USE_ESP32
-
-#include "esp32_touch.h"
-#include "esphome/core/application.h"
-#include "esphome/core/log.h"
-#include "esphome/core/hal.h"
-
-#include <cinttypes>
-
-namespace esphome {
-namespace esp32_touch {
-
-static const char *const TAG = "esp32_touch";
-
-void ESP32TouchComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Running setup");
-  touch_pad_init();
-// set up and enable/start filtering based on ESP32 variant
-#if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-  if (this->filter_configured_()) {
-    touch_filter_config_t filter_info = {
-        .mode = this->filter_mode_,
-        .debounce_cnt = this->debounce_count_,
-        .noise_thr = this->noise_threshold_,
-        .jitter_step = this->jitter_step_,
-        .smh_lvl = this->smooth_level_,
-    };
-    touch_pad_filter_set_config(&filter_info);
-    touch_pad_filter_enable();
-  }
-
-  if (this->denoise_configured_()) {
-    touch_pad_denoise_t denoise = {
-        .grade = this->grade_,
-        .cap_level = this->cap_level_,
-    };
-    touch_pad_denoise_set_config(&denoise);
-    touch_pad_denoise_enable();
-  }
-
-  if (this->waterproof_configured_()) {
-    touch_pad_waterproof_t waterproof = {
-        .guard_ring_pad = this->waterproof_guard_ring_pad_,
-        .shield_driver = this->waterproof_shield_driver_,
-    };
-    touch_pad_waterproof_set_config(&waterproof);
-    touch_pad_waterproof_enable();
-  }
-#else
-  if (this->iir_filter_enabled_()) {
-    touch_pad_filter_start(this->iir_filter_);
-  }
-#endif
-
-#if ESP_IDF_VERSION_MAJOR >= 5 && defined(USE_ESP32_VARIANT_ESP32)
-  touch_pad_set_measurement_clock_cycles(this->meas_cycle_);
-  touch_pad_set_measurement_interval(this->sleep_cycle_);
-#else
-  touch_pad_set_meas_time(this->sleep_cycle_, this->meas_cycle_);
-#endif
-  touch_pad_set_voltage(this->high_voltage_reference_, this->low_voltage_reference_, this->voltage_attenuation_);
-
-  for (auto *child : this->children_) {
-#if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    touch_pad_config(child->get_touch_pad());
-#else
-    // Disable interrupt threshold
-    touch_pad_config(child->get_touch_pad(), 0);
-#endif
-  }
-#if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-  touch_pad_set_fsm_mode(TOUCH_FSM_MODE_TIMER);
-  touch_pad_fsm_start();
-#endif
-}
-
-void ESP32TouchComponent::dump_config() {
-  ESP_LOGCONFIG(TAG,
-                "Config for ESP32 Touch Hub:\n"
-                "  Meas cycle: %.2fms\n"
-                "  Sleep cycle: %.2fms",
-                this->meas_cycle_ / (8000000.0f / 1000.0f), this->sleep_cycle_ / (150000.0f / 1000.0f));
-
-  const char *lv_s;
-  switch (this->low_voltage_reference_) {
-    case TOUCH_LVOLT_0V5:
-      lv_s = "0.5V";
-      break;
-    case TOUCH_LVOLT_0V6:
-      lv_s = "0.6V";
-      break;
-    case TOUCH_LVOLT_0V7:
-      lv_s = "0.7V";
-      break;
-    case TOUCH_LVOLT_0V8:
-      lv_s = "0.8V";
-      break;
-    default:
-      lv_s = "UNKNOWN";
-      break;
-  }
-  ESP_LOGCONFIG(TAG, "  Low Voltage Reference: %s", lv_s);
-
-  const char *hv_s;
-  switch (this->high_voltage_reference_) {
-    case TOUCH_HVOLT_2V4:
-      hv_s = "2.4V";
-      break;
-    case TOUCH_HVOLT_2V5:
-      hv_s = "2.5V";
-      break;
-    case TOUCH_HVOLT_2V6:
-      hv_s = "2.6V";
-      break;
-    case TOUCH_HVOLT_2V7:
-      hv_s = "2.7V";
-      break;
-    default:
-      hv_s = "UNKNOWN";
-      break;
-  }
-  ESP_LOGCONFIG(TAG, "  High Voltage Reference: %s", hv_s);
-
-  const char *atten_s;
-  switch (this->voltage_attenuation_) {
-    case TOUCH_HVOLT_ATTEN_1V5:
-      atten_s = "1.5V";
-      break;
-    case TOUCH_HVOLT_ATTEN_1V:
-      atten_s = "1V";
-      break;
-    case TOUCH_HVOLT_ATTEN_0V5:
-      atten_s = "0.5V";
-      break;
-    case TOUCH_HVOLT_ATTEN_0V:
-      atten_s = "0V";
-      break;
-    default:
-      atten_s = "UNKNOWN";
-      break;
-  }
-  ESP_LOGCONFIG(TAG, "  Voltage Attenuation: %s", atten_s);
-
-#if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-  if (this->filter_configured_()) {
-    const char *filter_mode_s;
-    switch (this->filter_mode_) {
-      case TOUCH_PAD_FILTER_IIR_4:
-        filter_mode_s = "IIR_4";
-        break;
-      case TOUCH_PAD_FILTER_IIR_8:
-        filter_mode_s = "IIR_8";
-        break;
-      case TOUCH_PAD_FILTER_IIR_16:
-        filter_mode_s = "IIR_16";
-        break;
-      case TOUCH_PAD_FILTER_IIR_32:
-        filter_mode_s = "IIR_32";
-        break;
-      case TOUCH_PAD_FILTER_IIR_64:
-        filter_mode_s = "IIR_64";
-        break;
-      case TOUCH_PAD_FILTER_IIR_128:
-        filter_mode_s = "IIR_128";
-        break;
-      case TOUCH_PAD_FILTER_IIR_256:
-        filter_mode_s = "IIR_256";
-        break;
-      case TOUCH_PAD_FILTER_JITTER:
-        filter_mode_s = "JITTER";
-        break;
-      default:
-        filter_mode_s = "UNKNOWN";
-        break;
-    }
-    ESP_LOGCONFIG(TAG,
-                  "  Filter mode: %s\n"
-                  "  Debounce count: %" PRIu32 "\n"
-                  "  Noise threshold coefficient: %" PRIu32 "\n"
-                  "  Jitter filter step size: %" PRIu32,
-                  filter_mode_s, this->debounce_count_, this->noise_threshold_, this->jitter_step_);
-    const char *smooth_level_s;
-    switch (this->smooth_level_) {
-      case TOUCH_PAD_SMOOTH_OFF:
-        smooth_level_s = "OFF";
-        break;
-      case TOUCH_PAD_SMOOTH_IIR_2:
-        smooth_level_s = "IIR_2";
-        break;
-      case TOUCH_PAD_SMOOTH_IIR_4:
-        smooth_level_s = "IIR_4";
-        break;
-      case TOUCH_PAD_SMOOTH_IIR_8:
-        smooth_level_s = "IIR_8";
-        break;
-      default:
-        smooth_level_s = "UNKNOWN";
-        break;
-    }
-    ESP_LOGCONFIG(TAG, "  Smooth level: %s", smooth_level_s);
-  }
-
-  if (this->denoise_configured_()) {
-    const char *grade_s;
-    switch (this->grade_) {
-      case TOUCH_PAD_DENOISE_BIT12:
-        grade_s = "BIT12";
-        break;
-      case TOUCH_PAD_DENOISE_BIT10:
-        grade_s = "BIT10";
-        break;
-      case TOUCH_PAD_DENOISE_BIT8:
-        grade_s = "BIT8";
-        break;
-      case TOUCH_PAD_DENOISE_BIT4:
-        grade_s = "BIT4";
-        break;
-      default:
-        grade_s = "UNKNOWN";
-        break;
-    }
-    ESP_LOGCONFIG(TAG, "  Denoise grade: %s", grade_s);
-
-    const char *cap_level_s;
-    switch (this->cap_level_) {
-      case TOUCH_PAD_DENOISE_CAP_L0:
-        cap_level_s = "L0";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L1:
-        cap_level_s = "L1";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L2:
-        cap_level_s = "L2";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L3:
-        cap_level_s = "L3";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L4:
-        cap_level_s = "L4";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L5:
-        cap_level_s = "L5";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L6:
-        cap_level_s = "L6";
-        break;
-      case TOUCH_PAD_DENOISE_CAP_L7:
-        cap_level_s = "L7";
-        break;
-      default:
-        cap_level_s = "UNKNOWN";
-        break;
-    }
-    ESP_LOGCONFIG(TAG, "  Denoise capacitance level: %s", cap_level_s);
-  }
-#else
-  if (this->iir_filter_enabled_()) {
-    ESP_LOGCONFIG(TAG, "    IIR Filter: %" PRIu32 "ms", this->iir_filter_);
-  } else {
-    ESP_LOGCONFIG(TAG, "  IIR Filter DISABLED");
-  }
-#endif
-
-  if (this->setup_mode_) {
-    ESP_LOGCONFIG(TAG, "  Setup Mode ENABLED");
-  }
-
-  for (auto *child : this->children_) {
-    LOG_BINARY_SENSOR("  ", "Touch Pad", child);
-    ESP_LOGCONFIG(TAG, "    Pad: T%" PRIu32, (uint32_t) child->get_touch_pad());
-    ESP_LOGCONFIG(TAG, "    Threshold: %" PRIu32, child->get_threshold());
-  }
-}
-
-uint32_t ESP32TouchComponent::component_touch_pad_read(touch_pad_t tp) {
-#if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-  uint32_t value = 0;
-  if (this->filter_configured_()) {
-    touch_pad_filter_read_smooth(tp, &value);
-  } else {
-    touch_pad_read_raw_data(tp, &value);
-  }
-#else
-  uint16_t value = 0;
-  if (this->iir_filter_enabled_()) {
-    touch_pad_read_filtered(tp, &value);
-  } else {
-    touch_pad_read(tp, &value);
-  }
-#endif
-  return value;
-}
-
-void ESP32TouchComponent::loop() {
-  const uint32_t now = App.get_loop_component_start_time();
-  bool should_print = this->setup_mode_ && now - this->setup_mode_last_log_print_ > 250;
-  for (auto *child : this->children_) {
-    child->value_ = this->component_touch_pad_read(child->get_touch_pad());
-#if !(defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3))
-    child->publish_state(child->value_ < child->get_threshold());
-#else
-    child->publish_state(child->value_ > child->get_threshold());
-#endif
-
-    if (should_print) {
-      ESP_LOGD(TAG, "Touch Pad '%s' (T%" PRIu32 "): %" PRIu32, child->get_name().c_str(),
-               (uint32_t) child->get_touch_pad(), child->value_);
-    }
-
-    App.feed_wdt();
-  }
-
-  if (should_print) {
-    // Avoid spamming logs
-    this->setup_mode_last_log_print_ = now;
-  }
-}
-
-void ESP32TouchComponent::on_shutdown() {
-  bool is_wakeup_source = false;
-
-#if !(defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3))
-  if (this->iir_filter_enabled_()) {
-    touch_pad_filter_stop();
-    touch_pad_filter_delete();
-  }
-#endif
-
-  for (auto *child : this->children_) {
-    if (child->get_wakeup_threshold() != 0) {
-      if (!is_wakeup_source) {
-        is_wakeup_source = true;
-        // Touch sensor FSM mode must be 'TOUCH_FSM_MODE_TIMER' to use it to wake-up.
-        touch_pad_set_fsm_mode(TOUCH_FSM_MODE_TIMER);
-      }
-
-#if !(defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3))
-      // No filter available when using as wake-up source.
-      touch_pad_config(child->get_touch_pad(), child->get_wakeup_threshold());
-#endif
-    }
-  }
-
-  if (!is_wakeup_source) {
-    touch_pad_deinit();
-  }
-}
-
-ESP32TouchBinarySensor::ESP32TouchBinarySensor(touch_pad_t touch_pad, uint32_t threshold, uint32_t wakeup_threshold)
-    : touch_pad_(touch_pad), threshold_(threshold), wakeup_threshold_(wakeup_threshold) {}
-
-}  // namespace esp32_touch
-}  // namespace esphome
-
-#endif

esphome/components/ld2410/button/reset_button.cpp

@@ -1,9 +0,0 @@
-#include "reset_button.h"
-
-namespace esphome {
-namespace ld2410 {
-
-void ResetButton::press_action() { this->parent_->factory_reset(); }
-
-}  // namespace ld2410
-}  // namespace esphome

esphome/components/ld2450/button/reset_button.cpp

@@ -1,9 +0,0 @@
-#include "reset_button.h"
-
-namespace esphome {
-namespace ld2450 {
-
-void ResetButton::press_action() { this->parent_->factory_reset(); }
-
-}  // namespace ld2450
-}  // namespace esphome

esphome/components/openthread/tlv.py

@@ -1,65 +0,0 @@
-# Sourced from https://gist.github.com/agners/0338576e0003318b63ec1ea75adc90f9
-import binascii
-import ipaddress
-
-from esphome.const import CONF_CHANNEL
-
-from . import (
-    CONF_EXT_PAN_ID,
-    CONF_MESH_LOCAL_PREFIX,
-    CONF_NETWORK_KEY,
-    CONF_NETWORK_NAME,
-    CONF_PAN_ID,
-    CONF_PSKC,
-)
-
-TLV_TYPES = {
-    0: CONF_CHANNEL,
-    1: CONF_PAN_ID,
-    2: CONF_EXT_PAN_ID,
-    3: CONF_NETWORK_NAME,
-    4: CONF_PSKC,
-    5: CONF_NETWORK_KEY,
-    7: CONF_MESH_LOCAL_PREFIX,
-}
-
-
-def parse_tlv(tlv) -> dict:
-    data = binascii.a2b_hex(tlv)
-    output = {}
-    pos = 0
-    while pos < len(data):
-        tag = data[pos]
-        pos += 1
-        _len = data[pos]
-        pos += 1
-        val = data[pos : pos + _len]
-        pos += _len
-        if tag in TLV_TYPES:
-            if tag == 3:
-                output[TLV_TYPES[tag]] = val.decode("utf-8")
-            elif tag == 7:
-                mesh_local_prefix = binascii.hexlify(val).decode("utf-8")
-                mesh_local_prefix_str = f"{mesh_local_prefix}0000000000000000"
-                ipv6_bytes = bytes.fromhex(mesh_local_prefix_str)
-                ipv6_address = ipaddress.IPv6Address(ipv6_bytes)
-                output[TLV_TYPES[tag]] = f"{ipv6_address}/64"
-            else:
-                output[TLV_TYPES[tag]] = int.from_bytes(val)
-    return output
-
-
-def main():
-    import sys
-
-    args = sys.argv[1:]
-    parsed = parse_tlv(args[0])
-    # print the parsed TLV data
-    for key, value in parsed.items():
-        if isinstance(value, bytes):
-            value = value.hex()
-        print(f"{key}: {value}")
-
-
-if __name__ == "__main__":
-    main()