esphome 2025.6.3__py3-none-any.whl → 2025.7.0__py3-none-any.whl

esphome/components/ld2410/ld2410.h

@@ -26,170 +26,67 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/helpers.h"
 
-#include <map>
-
 namespace esphome {
 namespace ld2410 {
 
-#define CHECK_BIT(var, pos) (((var) >> (pos)) & 1)
-
-// Commands
-static const uint8_t CMD_ENABLE_CONF = 0x00FF;
-static const uint8_t CMD_DISABLE_CONF = 0x00FE;
-static const uint8_t CMD_ENABLE_ENG = 0x0062;
-static const uint8_t CMD_DISABLE_ENG = 0x0063;
-static const uint8_t CMD_MAXDIST_DURATION = 0x0060;
-static const uint8_t CMD_QUERY = 0x0061;
-static const uint8_t CMD_GATE_SENS = 0x0064;
-static const uint8_t CMD_VERSION = 0x00A0;
-static const uint8_t CMD_QUERY_DISTANCE_RESOLUTION = 0x00AB;
-static const uint8_t CMD_SET_DISTANCE_RESOLUTION = 0x00AA;
-static const uint8_t CMD_QUERY_LIGHT_CONTROL = 0x00AE;
-static const uint8_t CMD_SET_LIGHT_CONTROL = 0x00AD;
-static const uint8_t CMD_SET_BAUD_RATE = 0x00A1;
-static const uint8_t CMD_BT_PASSWORD = 0x00A9;
-static const uint8_t CMD_MAC = 0x00A5;
-static const uint8_t CMD_RESET = 0x00A2;
-static const uint8_t CMD_RESTART = 0x00A3;
-static const uint8_t CMD_BLUETOOTH = 0x00A4;
-
-enum BaudRateStructure : uint8_t {
-  BAUD_RATE_9600 = 1,
-  BAUD_RATE_19200 = 2,
-  BAUD_RATE_38400 = 3,
-  BAUD_RATE_57600 = 4,
-  BAUD_RATE_115200 = 5,
-  BAUD_RATE_230400 = 6,
-  BAUD_RATE_256000 = 7,
-  BAUD_RATE_460800 = 8
-};
-
-static const std::map<std::string, uint8_t> BAUD_RATE_ENUM_TO_INT{
-    {"9600", BAUD_RATE_9600},     {"19200", BAUD_RATE_19200},   {"38400", BAUD_RATE_38400},
-    {"57600", BAUD_RATE_57600},   {"115200", BAUD_RATE_115200}, {"230400", BAUD_RATE_230400},
-    {"256000", BAUD_RATE_256000}, {"460800", BAUD_RATE_460800}};
-
-enum DistanceResolutionStructure : uint8_t { DISTANCE_RESOLUTION_0_2 = 0x01, DISTANCE_RESOLUTION_0_75 = 0x00 };
-
-static const std::map<std::string, uint8_t> DISTANCE_RESOLUTION_ENUM_TO_INT{{"0.2m", DISTANCE_RESOLUTION_0_2},
-                                                                            {"0.75m", DISTANCE_RESOLUTION_0_75}};
-static const std::map<uint8_t, std::string> DISTANCE_RESOLUTION_INT_TO_ENUM{{DISTANCE_RESOLUTION_0_2, "0.2m"},
-                                                                            {DISTANCE_RESOLUTION_0_75, "0.75m"}};
-
-enum LightFunctionStructure : uint8_t {
-  LIGHT_FUNCTION_OFF = 0x00,
-  LIGHT_FUNCTION_BELOW = 0x01,
-  LIGHT_FUNCTION_ABOVE = 0x02
-};
-
-static const std::map<std::string, uint8_t> LIGHT_FUNCTION_ENUM_TO_INT{
-    {"off", LIGHT_FUNCTION_OFF}, {"below", LIGHT_FUNCTION_BELOW}, {"above", LIGHT_FUNCTION_ABOVE}};
-static const std::map<uint8_t, std::string> LIGHT_FUNCTION_INT_TO_ENUM{
-    {LIGHT_FUNCTION_OFF, "off"}, {LIGHT_FUNCTION_BELOW, "below"}, {LIGHT_FUNCTION_ABOVE, "above"}};
-
-enum OutPinLevelStructure : uint8_t { OUT_PIN_LEVEL_LOW = 0x00, OUT_PIN_LEVEL_HIGH = 0x01 };
-
-static const std::map<std::string, uint8_t> OUT_PIN_LEVEL_ENUM_TO_INT{{"low", OUT_PIN_LEVEL_LOW},
-                                                                      {"high", OUT_PIN_LEVEL_HIGH}};
-static const std::map<uint8_t, std::string> OUT_PIN_LEVEL_INT_TO_ENUM{{OUT_PIN_LEVEL_LOW, "low"},
-                                                                      {OUT_PIN_LEVEL_HIGH, "high"}};
-
-// Commands values
-static const uint8_t CMD_MAX_MOVE_VALUE = 0x0000;
-static const uint8_t CMD_MAX_STILL_VALUE = 0x0001;
-static const uint8_t CMD_DURATION_VALUE = 0x0002;
-// Command Header & Footer
-static const uint8_t CMD_FRAME_HEADER[4] = {0xFD, 0xFC, 0xFB, 0xFA};
-static const uint8_t CMD_FRAME_END[4] = {0x04, 0x03, 0x02, 0x01};
-// Data Header & Footer
-static const uint8_t DATA_FRAME_HEADER[4] = {0xF4, 0xF3, 0xF2, 0xF1};
-static const uint8_t DATA_FRAME_END[4] = {0xF8, 0xF7, 0xF6, 0xF5};
-/*
-Data Type: 6th byte
-Target states: 9th byte
-    Moving target distance: 10~11th bytes
-    Moving target energy: 12th byte
-    Still target distance: 13~14th bytes
-    Still target energy: 15th byte
-    Detect distance: 16~17th bytes
-*/
-enum PeriodicDataStructure : uint8_t {
-  DATA_TYPES = 6,
-  TARGET_STATES = 8,
-  MOVING_TARGET_LOW = 9,
-  MOVING_TARGET_HIGH = 10,
-  MOVING_ENERGY = 11,
-  STILL_TARGET_LOW = 12,
-  STILL_TARGET_HIGH = 13,
-  STILL_ENERGY = 14,
-  DETECT_DISTANCE_LOW = 15,
-  DETECT_DISTANCE_HIGH = 16,
-  MOVING_SENSOR_START = 19,
-  STILL_SENSOR_START = 28,
-  LIGHT_SENSOR = 37,
-  OUT_PIN_SENSOR = 38,
-};
-enum PeriodicDataValue : uint8_t { HEAD = 0xAA, END = 0x55, CHECK = 0x00 };
-
-enum AckDataStructure : uint8_t { COMMAND = 6, COMMAND_STATUS = 7 };
+static const uint8_t MAX_LINE_LENGTH = 46;  // Max characters for serial buffer
+static const uint8_t TOTAL_GATES = 9;       // Total number of gates supported by the LD2410
 
-//  char cmd[2] = {enable ? 0xFF : 0xFE, 0x00};
 class LD2410Component : public Component, public uart::UARTDevice {
+#ifdef USE_BINARY_SENSOR
+  SUB_BINARY_SENSOR(out_pin_presence_status)
+  SUB_BINARY_SENSOR(moving_target)
+  SUB_BINARY_SENSOR(still_target)
+  SUB_BINARY_SENSOR(target)
+#endif
 #ifdef USE_SENSOR
+  SUB_SENSOR(light)
+  SUB_SENSOR(detection_distance)
   SUB_SENSOR(moving_target_distance)
-  SUB_SENSOR(still_target_distance)
   SUB_SENSOR(moving_target_energy)
+  SUB_SENSOR(still_target_distance)
   SUB_SENSOR(still_target_energy)
-  SUB_SENSOR(light)
-  SUB_SENSOR(detection_distance)
-#endif
-#ifdef USE_BINARY_SENSOR
-  SUB_BINARY_SENSOR(target)
-  SUB_BINARY_SENSOR(moving_target)
-  SUB_BINARY_SENSOR(still_target)
-  SUB_BINARY_SENSOR(out_pin_presence_status)
 #endif
 #ifdef USE_TEXT_SENSOR
   SUB_TEXT_SENSOR(version)
   SUB_TEXT_SENSOR(mac)
 #endif
+#ifdef USE_NUMBER
+  SUB_NUMBER(light_threshold)
+  SUB_NUMBER(max_move_distance_gate)
+  SUB_NUMBER(max_still_distance_gate)
+  SUB_NUMBER(timeout)
+#endif
 #ifdef USE_SELECT
-  SUB_SELECT(distance_resolution)
   SUB_SELECT(baud_rate)
+  SUB_SELECT(distance_resolution)
   SUB_SELECT(light_function)
   SUB_SELECT(out_pin_level)
 #endif
 #ifdef USE_SWITCH
-  SUB_SWITCH(engineering_mode)
   SUB_SWITCH(bluetooth)
+  SUB_SWITCH(engineering_mode)
 #endif
 #ifdef USE_BUTTON
-  SUB_BUTTON(reset)
-  SUB_BUTTON(restart)
+  SUB_BUTTON(factory_reset)
   SUB_BUTTON(query)
-#endif
-#ifdef USE_NUMBER
-  SUB_NUMBER(max_still_distance_gate)
-  SUB_NUMBER(max_move_distance_gate)
-  SUB_NUMBER(timeout)
-  SUB_NUMBER(light_threshold)
+  SUB_BUTTON(restart)
 #endif
 
  public:
-  LD2410Component();
   void setup() override;
   void dump_config() override;
   void loop() override;
   void set_light_out_control();
 #ifdef USE_NUMBER
-  void set_gate_still_threshold_number(int gate, number::Number *n);
-  void set_gate_move_threshold_number(int gate, number::Number *n);
+  void set_gate_still_threshold_number(uint8_t gate, number::Number *n);
+  void set_gate_move_threshold_number(uint8_t gate, number::Number *n);
   void set_max_distances_timeout();
   void set_gate_threshold(uint8_t gate);
 #endif
 #ifdef USE_SENSOR
-  void set_gate_move_sensor(int gate, sensor::Sensor *s);
-  void set_gate_still_sensor(int gate, sensor::Sensor *s);
+  void set_gate_move_sensor(uint8_t gate, sensor::Sensor *s);
+  void set_gate_still_sensor(uint8_t gate, sensor::Sensor *s);
 #endif
   void set_throttle(uint16_t value) { this->throttle_ = value; };
   void set_bluetooth_password(const std::string &password);
@@ -202,34 +99,35 @@ class LD2410Component : public Component, public uart::UARTDevice {
   void factory_reset();
 
  protected:
-  int two_byte_to_int_(char firstbyte, char secondbyte) { return (int16_t) (secondbyte << 8) + firstbyte; }
-  void send_command_(uint8_t command_str, const uint8_t *command_value, int command_value_len);
+  void send_command_(uint8_t command_str, const uint8_t *command_value, uint8_t command_value_len);
   void set_config_mode_(bool enable);
-  void handle_periodic_data_(uint8_t *buffer, int len);
-  bool handle_ack_data_(uint8_t *buffer, int len);
-  void readline_(int readch, uint8_t *buffer, int len);
+  void handle_periodic_data_();
+  bool handle_ack_data_();
+  void readline_(int readch);
   void query_parameters_();
   void get_version_();
   void get_mac_();
   void get_distance_resolution_();
-  void get_light_control_();
+  void query_light_control_();
   void restart_();
 
-  int32_t last_periodic_millis_ = millis();
-  int32_t last_engineering_mode_change_millis_ = millis();
-  uint16_t throttle_;
-  std::string version_;
-  std::string mac_;
-  std::string out_pin_level_;
-  std::string light_function_;
-  float light_threshold_ = -1;
+  uint32_t last_periodic_millis_ = 0;
+  uint16_t throttle_ = 0;
+  uint8_t light_function_ = 0;
+  uint8_t light_threshold_ = 0;
+  uint8_t out_pin_level_ = 0;
+  uint8_t buffer_pos_ = 0;  // where to resume processing/populating buffer
+  uint8_t buffer_data_[MAX_LINE_LENGTH];
+  uint8_t mac_address_[6] = {0, 0, 0, 0, 0, 0};
+  uint8_t version_[6] = {0, 0, 0, 0, 0, 0};
+  bool bluetooth_on_{false};
 #ifdef USE_NUMBER
-  std::vector<number::Number *> gate_still_threshold_numbers_ = std::vector<number::Number *>(9);
-  std::vector<number::Number *> gate_move_threshold_numbers_ = std::vector<number::Number *>(9);
+  std::vector<number::Number *> gate_move_threshold_numbers_ = std::vector<number::Number *>(TOTAL_GATES);
+  std::vector<number::Number *> gate_still_threshold_numbers_ = std::vector<number::Number *>(TOTAL_GATES);
 #endif
 #ifdef USE_SENSOR
-  std::vector<sensor::Sensor *> gate_still_sensors_ = std::vector<sensor::Sensor *>(9);
-  std::vector<sensor::Sensor *> gate_move_sensors_ = std::vector<sensor::Sensor *>(9);
+  std::vector<sensor::Sensor *> gate_move_sensors_ = std::vector<sensor::Sensor *>(TOTAL_GATES);
+  std::vector<sensor::Sensor *> gate_still_sensors_ = std::vector<sensor::Sensor *>(TOTAL_GATES);
 #endif
 };
 

esphome/components/ld2410/number/__init__.py

@@ -3,6 +3,8 @@ from esphome.components import number
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
+    CONF_MOVE_THRESHOLD,
+    CONF_STILL_THRESHOLD,
     CONF_TIMEOUT,
     DEVICE_CLASS_DISTANCE,
     DEVICE_CLASS_ILLUMINANCE,
@@ -24,8 +26,6 @@ MaxDistanceTimeoutNumber = ld2410_ns.class_("MaxDistanceTimeoutNumber", number.N
 CONF_MAX_MOVE_DISTANCE_GATE = "max_move_distance_gate"
 CONF_MAX_STILL_DISTANCE_GATE = "max_still_distance_gate"
 CONF_LIGHT_THRESHOLD = "light_threshold"
-CONF_STILL_THRESHOLD = "still_threshold"
-CONF_MOVE_THRESHOLD = "move_threshold"
 
 TIMEOUT_GROUP = "timeout"
 

esphome/components/ld2410/sensor.py

@@ -3,6 +3,7 @@ from esphome.components import sensor
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_LIGHT,
+    CONF_MOVING_DISTANCE,
     DEVICE_CLASS_DISTANCE,
     DEVICE_CLASS_ILLUMINANCE,
     ENTITY_CATEGORY_DIAGNOSTIC,
@@ -17,7 +18,6 @@ from esphome.const import (
 from . import CONF_LD2410_ID, LD2410Component
 
 DEPENDENCIES = ["ld2410"]
-CONF_MOVING_DISTANCE = "moving_distance"
 CONF_STILL_DISTANCE = "still_distance"
 CONF_MOVING_ENERGY = "moving_energy"
 CONF_STILL_ENERGY = "still_energy"

esphome/components/ld2410/switch/__init__.py

@@ -2,6 +2,7 @@ import esphome.codegen as cg
 from esphome.components import switch
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_BLUETOOTH,
     DEVICE_CLASS_SWITCH,
     ENTITY_CATEGORY_CONFIG,
     ICON_BLUETOOTH,
@@ -14,7 +15,6 @@ BluetoothSwitch = ld2410_ns.class_("BluetoothSwitch", switch.Switch)
 EngineeringModeSwitch = ld2410_ns.class_("EngineeringModeSwitch", switch.Switch)
 
 CONF_ENGINEERING_MODE = "engineering_mode"
-CONF_BLUETOOTH = "bluetooth"
 
 CONFIG_SCHEMA = {
     cv.GenerateID(CONF_LD2410_ID): cv.use_id(LD2410Component),

esphome/components/ld2420/binary_sensor/ld2420_binary_sensor.cpp

@@ -5,10 +5,10 @@
 namespace esphome {
 namespace ld2420 {
 
-static const char *const TAG = "LD2420.binary_sensor";
+static const char *const TAG = "ld2420.binary_sensor";
 
 void LD2420BinarySensor::dump_config() {
-  ESP_LOGCONFIG(TAG, "LD2420 BinarySensor:");
+  ESP_LOGCONFIG(TAG, "Binary Sensor:");
   LOG_BINARY_SENSOR("  ", "Presence", this->presence_bsensor_);
 }
 

esphome/components/ld2420/button/reconfig_buttons.cpp

@@ -2,7 +2,7 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-static const char *const TAG = "LD2420.button";
+static const char *const TAG = "ld2420.button";
 
 namespace esphome {
 namespace ld2420 {