esphome 2025.5.1__py3-none-any.whl → 2025.6.0b1__py3-none-any.whl

esphome/components/template/alarm_control_panel/template_alarm_control_panel.cpp

@@ -29,8 +29,10 @@ void TemplateAlarmControlPanel::add_sensor(binary_sensor::BinarySensor *sensor,
 
 void TemplateAlarmControlPanel::dump_config() {
   ESP_LOGCONFIG(TAG, "TemplateAlarmControlPanel:");
-  ESP_LOGCONFIG(TAG, "  Current State: %s", LOG_STR_ARG(alarm_control_panel_state_to_string(this->current_state_)));
-  ESP_LOGCONFIG(TAG, "  Number of Codes: %u", this->codes_.size());
+  ESP_LOGCONFIG(TAG,
+                "  Current State: %s\n"
+                "  Number of Codes: %u",
+                LOG_STR_ARG(alarm_control_panel_state_to_string(this->current_state_)), this->codes_.size());
   if (!this->codes_.empty())
     ESP_LOGCONFIG(TAG, "  Requires Code To Arm: %s", YESNO(this->requires_code_to_arm_));
   ESP_LOGCONFIG(TAG, "  Arming Away Time: %" PRIu32 "s", (this->arming_away_time_ / 1000));
@@ -38,18 +40,25 @@ void TemplateAlarmControlPanel::dump_config() {
     ESP_LOGCONFIG(TAG, "  Arming Home Time: %" PRIu32 "s", (this->arming_home_time_ / 1000));
   if (this->arming_night_time_ != 0)
     ESP_LOGCONFIG(TAG, "  Arming Night Time: %" PRIu32 "s", (this->arming_night_time_ / 1000));
-  ESP_LOGCONFIG(TAG, "  Pending Time: %" PRIu32 "s", (this->pending_time_ / 1000));
-  ESP_LOGCONFIG(TAG, "  Trigger Time: %" PRIu32 "s", (this->trigger_time_ / 1000));
-  ESP_LOGCONFIG(TAG, "  Supported Features: %" PRIu32, this->get_supported_features());
+  ESP_LOGCONFIG(TAG,
+                "  Pending Time: %" PRIu32 "s\n"
+                "  Trigger Time: %" PRIu32 "s\n"
+                "  Supported Features: %" PRIu32,
+                (this->pending_time_ / 1000), (this->trigger_time_ / 1000), this->get_supported_features());
 #ifdef USE_BINARY_SENSOR
   for (auto sensor_info : this->sensor_map_) {
     ESP_LOGCONFIG(TAG, "  Binary Sensor:");
-    ESP_LOGCONFIG(TAG, "    Name: %s", sensor_info.first->get_name().c_str());
-    ESP_LOGCONFIG(TAG, "    Armed home bypass: %s",
-                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_ARMED_HOME));
-    ESP_LOGCONFIG(TAG, "    Armed night bypass: %s",
-                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_ARMED_NIGHT));
-    ESP_LOGCONFIG(TAG, "    Chime mode: %s", TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_CHIME));
+    ESP_LOGCONFIG(TAG,
+                  "    Name: %s\n"
+                  "    Armed home bypass: %s\n"
+                  "    Armed night bypass: %s\n"
+                  "    Auto bypass: %s\n"
+                  "    Chime mode: %s",
+                  sensor_info.first->get_name().c_str(),
+                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_ARMED_HOME),
+                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_ARMED_NIGHT),
+                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_AUTO),
+                  TRUEFALSE(sensor_info.second.flags & BINARY_SENSOR_MODE_CHIME));
     const char *sensor_type;
     switch (sensor_info.second.type) {
       case ALARM_SENSOR_TYPE_INSTANT:
@@ -71,7 +80,7 @@ void TemplateAlarmControlPanel::dump_config() {
 }
 
 void TemplateAlarmControlPanel::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Template AlarmControlPanel '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   switch (this->restore_mode_) {
     case ALARM_CONTROL_PANEL_ALWAYS_DISARMED:
       this->current_state_ = ACP_STATE_DISARMED;
@@ -101,6 +110,15 @@ void TemplateAlarmControlPanel::loop() {
       delay = this->arming_night_time_;
     }
     if ((millis() - this->last_update_) > delay) {
+#ifdef USE_BINARY_SENSOR
+      for (auto sensor_info : this->sensor_map_) {
+        // Check for sensors left on and set to bypass automatically and remove them from monitoring
+        if ((sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_AUTO) && (sensor_info.first->state)) {
+          ESP_LOGW(TAG, "%s is left on and will be automatically bypassed", sensor_info.first->get_name().c_str());
+          this->bypassed_sensor_indicies_.push_back(sensor_info.second.store_index);
+        }
+      }
+#endif
       this->publish_state(this->desired_state_);
     }
     return;
@@ -137,6 +155,11 @@ void TemplateAlarmControlPanel::loop() {
     }
     // Check for triggered sensors
     if (sensor_info.first->state) {  // Sensor triggered?
+      // Skip if auto bypassed
+      if (std::count(this->bypassed_sensor_indicies_.begin(), this->bypassed_sensor_indicies_.end(),
+                     sensor_info.second.store_index) == 1) {
+        continue;
+      }
       // Skip if bypass armed home
       if (this->current_state_ == ACP_STATE_ARMED_HOME &&
           (sensor_info.second.flags & BINARY_SENSOR_MODE_BYPASS_ARMED_HOME)) {
@@ -255,6 +278,9 @@ void TemplateAlarmControlPanel::control(const AlarmControlPanelCall &call) {
       }
       this->desired_state_ = ACP_STATE_DISARMED;
       this->publish_state(ACP_STATE_DISARMED);
+#ifdef USE_BINARY_SENSOR
+      this->bypassed_sensor_indicies_.clear();
+#endif
     } else if (call.get_state() == ACP_STATE_TRIGGERED) {
       this->publish_state(ACP_STATE_TRIGGERED);
     } else if (call.get_state() == ACP_STATE_PENDING) {

esphome/components/template/alarm_control_panel/template_alarm_control_panel.h

@@ -22,6 +22,7 @@ enum BinarySensorFlags : uint16_t {
   BINARY_SENSOR_MODE_BYPASS_ARMED_HOME = 1 << 1,
   BINARY_SENSOR_MODE_BYPASS_ARMED_NIGHT = 1 << 2,
   BINARY_SENSOR_MODE_CHIME = 1 << 3,
+  BINARY_SENSOR_MODE_BYPASS_AUTO = 1 << 4,
 };
 
 enum AlarmSensorType : uint16_t {
@@ -121,7 +122,8 @@ class TemplateAlarmControlPanel : public alarm_control_panel::AlarmControlPanel,
 #ifdef USE_BINARY_SENSOR
   // This maps a binary sensor to its type and attribute bits
   std::map<binary_sensor::BinarySensor *, SensorInfo> sensor_map_;
-
+  // a list of automatically bypassed sensors
+  std::vector<uint8_t> bypassed_sensor_indicies_;
 #endif
   TemplateAlarmControlPanelRestoreMode restore_mode_{};
 

esphome/components/template/cover/template_cover.cpp

@@ -16,7 +16,7 @@ TemplateCover::TemplateCover()
       position_trigger_(new Trigger<float>()),
       tilt_trigger_(new Trigger<float>()) {}
 void TemplateCover::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up template cover '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   switch (this->restore_mode_) {
     case COVER_NO_RESTORE:
       break;

esphome/components/template/select/template_select.cpp

@@ -11,7 +11,7 @@ void TemplateSelect::setup() {
     return;
 
   std::string value;
-  ESP_LOGD(TAG, "Setting up Template Select");
+  ESP_LOGD(TAG, "Setting up");
   if (!this->restore_value_) {
     value = this->initial_option_;
     ESP_LOGD(TAG, "State from initial: %s", value.c_str());
@@ -66,9 +66,11 @@ void TemplateSelect::dump_config() {
   LOG_UPDATE_INTERVAL(this);
   if (this->f_.has_value())
     return;
-  ESP_LOGCONFIG(TAG, "  Optimistic: %s", YESNO(this->optimistic_));
-  ESP_LOGCONFIG(TAG, "  Initial Option: %s", this->initial_option_.c_str());
-  ESP_LOGCONFIG(TAG, "  Restore Value: %s", YESNO(this->restore_value_));
+  ESP_LOGCONFIG(TAG,
+                "  Optimistic: %s\n"
+                "  Initial Option: %s\n"
+                "  Restore Value: %s",
+                YESNO(this->optimistic_), this->initial_option_.c_str(), YESNO(this->restore_value_));
 }
 
 }  // namespace template_

esphome/components/template/text/template_text.cpp

@@ -12,9 +12,8 @@ void TemplateText::setup() {
       return;
   }
 
-  std::string value;
-  ESP_LOGD(TAG, "Setting up Template Text Input");
-  value = this->initial_value_;
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
+  std::string value = this->initial_value_;
   if (!this->pref_) {
     ESP_LOGD(TAG, "State from initial: %s", value.c_str());
   } else {

esphome/components/template/valve/template_valve.cpp

@@ -16,7 +16,7 @@ TemplateValve::TemplateValve()
       position_trigger_(new Trigger<float>()) {}
 
 void TemplateValve::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up template valve '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   switch (this->restore_mode_) {
     case VALVE_NO_RESTORE:
       break;
@@ -66,8 +66,10 @@ Trigger<> *TemplateValve::get_toggle_trigger() const { return this->toggle_trigg
 
 void TemplateValve::dump_config() {
   LOG_VALVE("", "Template Valve", this);
-  ESP_LOGCONFIG(TAG, "  Has position: %s", YESNO(this->has_position_));
-  ESP_LOGCONFIG(TAG, "  Optimistic: %s", YESNO(this->optimistic_));
+  ESP_LOGCONFIG(TAG,
+                "  Has position: %s\n"
+                "  Optimistic: %s",
+                YESNO(this->has_position_), YESNO(this->optimistic_));
 }
 
 void TemplateValve::control(const ValveCall &call) {

esphome/components/text/__init__.py

@@ -1,5 +1,3 @@
-from typing import Optional
-
 from esphome import automation
 import esphome.codegen as cg
 from esphome.components import mqtt, web_server
@@ -92,9 +90,9 @@ async def setup_text_core_(
     var,
     config,
     *,
-    min_length: Optional[int],
-    max_length: Optional[int],
-    pattern: Optional[str],
+    min_length: int | None,
+    max_length: int | None,
+    pattern: str | None,
 ):
     await setup_entity(var, config)
 
@@ -121,13 +119,14 @@ async def register_text(
     var,
     config,
     *,
-    min_length: Optional[int] = 0,
-    max_length: Optional[int] = 255,
-    pattern: Optional[str] = None,
+    min_length: int | None = 0,
+    max_length: int | None = 255,
+    pattern: str | None = None,
 ):
     if not CORE.has_id(config[CONF_ID]):
         var = cg.Pvariable(config[CONF_ID], var)
     cg.add(cg.App.register_text(var))
+    CORE.register_platform_component("text", var)
     await setup_text_core_(
         var, config, min_length=min_length, max_length=max_length, pattern=pattern
     )
@@ -136,9 +135,9 @@ async def register_text(
 async def new_text(
     config,
     *,
-    min_length: Optional[int] = 0,
-    max_length: Optional[int] = 255,
-    pattern: Optional[str] = None,
+    min_length: int | None = 0,
+    max_length: int | None = 255,
+    pattern: str | None = None,
 ):
     var = cg.new_Pvariable(config[CONF_ID])
     await register_text(

esphome/components/text_sensor/__init__.py

@@ -215,6 +215,7 @@ async def register_text_sensor(var, config):
     if not CORE.has_id(config[CONF_ID]):
         var = cg.Pvariable(config[CONF_ID], var)
     cg.add(cg.App.register_text_sensor(var))
+    CORE.register_platform_component("text_sensor", var)
     await setup_text_sensor_core_(var, config)
 
 

esphome/components/thermostat/thermostat_climate.cpp

@@ -537,7 +537,7 @@ void ThermostatClimate::switch_to_supplemental_action_(climate::ClimateAction ac
     default:
       return;
   }
-  ESP_LOGVV(TAG, "Updating supplemental action...");
+  ESP_LOGVV(TAG, "Updating supplemental action");
   this->supplemental_action_ = action;
   this->trigger_supplemental_action_();
 }
@@ -1300,37 +1300,48 @@ void ThermostatClimate::dump_config() {
   }
   ESP_LOGCONFIG(TAG, "  Start-up Delay Enabled: %s", YESNO(this->use_startup_delay_));
   if (this->supports_cool_) {
-    ESP_LOGCONFIG(TAG, "  Cooling Parameters:");
-    ESP_LOGCONFIG(TAG, "    Deadband: %.1f°C", this->cooling_deadband_);
-    ESP_LOGCONFIG(TAG, "    Overrun: %.1f°C", this->cooling_overrun_);
+    ESP_LOGCONFIG(TAG,
+                  "  Cooling Parameters:\n"
+                  "    Deadband: %.1f°C\n"
+                  "    Overrun: %.1f°C",
+                  this->cooling_deadband_, this->cooling_overrun_);
     if ((this->supplemental_cool_delta_ > 0) || (this->timer_duration_(thermostat::TIMER_COOLING_MAX_RUN_TIME) > 0)) {
-      ESP_LOGCONFIG(TAG, "    Supplemental Delta: %.1f°C", this->supplemental_cool_delta_);
-      ESP_LOGCONFIG(TAG, "    Maximum Run Time: %" PRIu32 "s",
+      ESP_LOGCONFIG(TAG,
+                    "    Supplemental Delta: %.1f°C\n"
+                    "    Maximum Run Time: %" PRIu32 "s",
+                    this->supplemental_cool_delta_,
                     this->timer_duration_(thermostat::TIMER_COOLING_MAX_RUN_TIME) / 1000);
     }
-    ESP_LOGCONFIG(TAG, "    Minimum Off Time: %" PRIu32 "s",
-                  this->timer_duration_(thermostat::TIMER_COOLING_OFF) / 1000);
-    ESP_LOGCONFIG(TAG, "    Minimum Run Time: %" PRIu32 "s",
+    ESP_LOGCONFIG(TAG,
+                  "    Minimum Off Time: %" PRIu32 "s\n"
+                  "    Minimum Run Time: %" PRIu32 "s",
+                  this->timer_duration_(thermostat::TIMER_COOLING_OFF) / 1000,
                   this->timer_duration_(thermostat::TIMER_COOLING_ON) / 1000);
   }
   if (this->supports_heat_) {
-    ESP_LOGCONFIG(TAG, "  Heating Parameters:");
-    ESP_LOGCONFIG(TAG, "    Deadband: %.1f°C", this->heating_deadband_);
-    ESP_LOGCONFIG(TAG, "    Overrun: %.1f°C", this->heating_overrun_);
+    ESP_LOGCONFIG(TAG,
+                  "  Heating Parameters:\n"
+                  "    Deadband: %.1f°C\n"
+                  "    Overrun: %.1f°C",
+                  this->heating_deadband_, this->heating_overrun_);
     if ((this->supplemental_heat_delta_ > 0) || (this->timer_duration_(thermostat::TIMER_HEATING_MAX_RUN_TIME) > 0)) {
-      ESP_LOGCONFIG(TAG, "    Supplemental Delta: %.1f°C", this->supplemental_heat_delta_);
-      ESP_LOGCONFIG(TAG, "    Maximum Run Time: %" PRIu32 "s",
+      ESP_LOGCONFIG(TAG,
+                    "    Supplemental Delta: %.1f°C\n"
+                    "    Maximum Run Time: %" PRIu32 "s",
+                    this->supplemental_heat_delta_,
                     this->timer_duration_(thermostat::TIMER_HEATING_MAX_RUN_TIME) / 1000);
     }
-    ESP_LOGCONFIG(TAG, "    Minimum Off Time: %" PRIu32 "s",
-                  this->timer_duration_(thermostat::TIMER_HEATING_OFF) / 1000);
-    ESP_LOGCONFIG(TAG, "    Minimum Run Time: %" PRIu32 "s",
+    ESP_LOGCONFIG(TAG,
+                  "    Minimum Off Time: %" PRIu32 "s\n"
+                  "    Minimum Run Time: %" PRIu32 "s",
+                  this->timer_duration_(thermostat::TIMER_HEATING_OFF) / 1000,
                   this->timer_duration_(thermostat::TIMER_HEATING_ON) / 1000);
   }
   if (this->supports_fan_only_) {
-    ESP_LOGCONFIG(TAG, "  Fanning Minimum Off Time: %" PRIu32 "s",
-                  this->timer_duration_(thermostat::TIMER_FANNING_OFF) / 1000);
-    ESP_LOGCONFIG(TAG, "  Fanning Minimum Run Time: %" PRIu32 "s",
+    ESP_LOGCONFIG(TAG,
+                  "  Fanning Minimum Off Time: %" PRIu32 "s\n"
+                  "  Fanning Minimum Run Time: %" PRIu32 "s",
+                  this->timer_duration_(thermostat::TIMER_FANNING_OFF) / 1000,
                   this->timer_duration_(thermostat::TIMER_FANNING_ON) / 1000);
   }
   if (this->supports_fan_mode_on_ || this->supports_fan_mode_off_ || this->supports_fan_mode_auto_ ||
@@ -1341,14 +1352,17 @@ void ThermostatClimate::dump_config() {
                   this->timer_duration_(thermostat::TIMER_FAN_MODE) / 1000);
   }
   ESP_LOGCONFIG(TAG, "  Minimum Idle Time: %" PRIu32 "s", this->timer_[thermostat::TIMER_IDLE_ON].time / 1000);
-  ESP_LOGCONFIG(TAG, "  Supports AUTO: %s", YESNO(this->supports_auto_));
-  ESP_LOGCONFIG(TAG, "  Supports HEAT/COOL: %s", YESNO(this->supports_heat_cool_));
-  ESP_LOGCONFIG(TAG, "  Supports COOL: %s", YESNO(this->supports_cool_));
-  ESP_LOGCONFIG(TAG, "  Supports DRY: %s", YESNO(this->supports_dry_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN_ONLY: %s", YESNO(this->supports_fan_only_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: %s",
-                YESNO(this->supports_fan_only_action_uses_fan_mode_timer_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN_ONLY_COOLING: %s", YESNO(this->supports_fan_only_cooling_));
+  ESP_LOGCONFIG(TAG,
+                "  Supports AUTO: %s\n"
+                "  Supports HEAT/COOL: %s\n"
+                "  Supports COOL: %s\n"
+                "  Supports DRY: %s\n"
+                "  Supports FAN_ONLY: %s\n"
+                "  Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: %s\n"
+                "  Supports FAN_ONLY_COOLING: %s",
+                YESNO(this->supports_auto_), YESNO(this->supports_heat_cool_), YESNO(this->supports_cool_),
+                YESNO(this->supports_dry_), YESNO(this->supports_fan_only_),
+                YESNO(this->supports_fan_only_action_uses_fan_mode_timer_), YESNO(this->supports_fan_only_cooling_));
   if (this->supports_cool_) {
     ESP_LOGCONFIG(TAG, "  Supports FAN_WITH_COOLING: %s", YESNO(this->supports_fan_with_cooling_));
   }
@@ -1356,21 +1370,31 @@ void ThermostatClimate::dump_config() {
     ESP_LOGCONFIG(TAG, "  Supports FAN_WITH_HEATING: %s", YESNO(this->supports_fan_with_heating_));
   }
   ESP_LOGCONFIG(TAG, "  Supports HEAT: %s", YESNO(this->supports_heat_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE ON: %s", YESNO(this->supports_fan_mode_on_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE OFF: %s", YESNO(this->supports_fan_mode_off_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE AUTO: %s", YESNO(this->supports_fan_mode_auto_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE LOW: %s", YESNO(this->supports_fan_mode_low_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE MEDIUM: %s", YESNO(this->supports_fan_mode_medium_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE HIGH: %s", YESNO(this->supports_fan_mode_high_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE MIDDLE: %s", YESNO(this->supports_fan_mode_middle_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE FOCUS: %s", YESNO(this->supports_fan_mode_focus_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE DIFFUSE: %s", YESNO(this->supports_fan_mode_diffuse_));
-  ESP_LOGCONFIG(TAG, "  Supports FAN MODE QUIET: %s", YESNO(this->supports_fan_mode_quiet_));
-  ESP_LOGCONFIG(TAG, "  Supports SWING MODE BOTH: %s", YESNO(this->supports_swing_mode_both_));
-  ESP_LOGCONFIG(TAG, "  Supports SWING MODE OFF: %s", YESNO(this->supports_swing_mode_off_));
-  ESP_LOGCONFIG(TAG, "  Supports SWING MODE HORIZONTAL: %s", YESNO(this->supports_swing_mode_horizontal_));
-  ESP_LOGCONFIG(TAG, "  Supports SWING MODE VERTICAL: %s", YESNO(this->supports_swing_mode_vertical_));
-  ESP_LOGCONFIG(TAG, "  Supports TWO SET POINTS: %s", YESNO(this->supports_two_points_));
+  ESP_LOGCONFIG(TAG,
+                "  Supports FAN MODE ON: %s\n"
+                "  Supports FAN MODE OFF: %s\n"
+                "  Supports FAN MODE AUTO: %s\n"
+                "  Supports FAN MODE LOW: %s\n"
+                "  Supports FAN MODE MEDIUM: %s\n"
+                "  Supports FAN MODE HIGH: %s\n"
+                "  Supports FAN MODE MIDDLE: %s\n"
+                "  Supports FAN MODE FOCUS: %s\n"
+                "  Supports FAN MODE DIFFUSE: %s\n"
+                "  Supports FAN MODE QUIET: %s",
+                YESNO(this->supports_fan_mode_on_), YESNO(this->supports_fan_mode_off_),
+                YESNO(this->supports_fan_mode_auto_), YESNO(this->supports_fan_mode_low_),
+                YESNO(this->supports_fan_mode_medium_), YESNO(this->supports_fan_mode_high_),
+                YESNO(this->supports_fan_mode_middle_), YESNO(this->supports_fan_mode_focus_),
+                YESNO(this->supports_fan_mode_diffuse_), YESNO(this->supports_fan_mode_quiet_));
+  ESP_LOGCONFIG(TAG,
+                "  Supports SWING MODE BOTH: %s\n"
+                "  Supports SWING MODE OFF: %s\n"
+                "  Supports SWING MODE HORIZONTAL: %s\n"
+                "  Supports SWING MODE VERTICAL: %s\n"
+                "  Supports TWO SET POINTS: %s",
+                YESNO(this->supports_swing_mode_both_), YESNO(this->supports_swing_mode_off_),
+                YESNO(this->supports_swing_mode_horizontal_), YESNO(this->supports_swing_mode_vertical_),
+                YESNO(this->supports_two_points_));
 
   ESP_LOGCONFIG(TAG, "  Supported PRESETS: ");
   for (auto &it : this->preset_config_) {

esphome/components/time/__init__.py

@@ -1,6 +1,5 @@
 from importlib import resources
 import logging
-from typing import Optional
 
 import tzlocal
 
@@ -40,7 +39,7 @@ SyncTrigger = time_ns.class_("SyncTrigger", automation.Trigger.template(), cg.Co
 TimeHasTimeCondition = time_ns.class_("TimeHasTimeCondition", Condition)
 
 
-def _load_tzdata(iana_key: str) -> Optional[bytes]:
+def _load_tzdata(iana_key: str) -> bytes | None:
     # From https://tzdata.readthedocs.io/en/latest/#examples
     try:
         package_loc, resource = iana_key.rsplit("/", 1)

esphome/components/time_based/time_based_cover.cpp

@@ -12,8 +12,10 @@ using namespace esphome::cover;
 
 void TimeBasedCover::dump_config() {
   LOG_COVER("", "Time Based Cover", this);
-  ESP_LOGCONFIG(TAG, "  Open Duration: %.1fs", this->open_duration_ / 1e3f);
-  ESP_LOGCONFIG(TAG, "  Close Duration: %.1fs", this->close_duration_ / 1e3f);
+  ESP_LOGCONFIG(TAG,
+                "  Open Duration: %.1fs\n"
+                "  Close Duration: %.1fs",
+                this->open_duration_ / 1e3f, this->close_duration_ / 1e3f);
 }
 void TimeBasedCover::setup() {
   auto restore = this->restore_state_();

esphome/components/tlc59208f/tlc59208f_output.cpp

@@ -1,7 +1,7 @@
 #include "tlc59208f_output.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace tlc59208f {
@@ -71,9 +71,9 @@ static const uint8_t LDR_PWM = 0x02;
 static const uint8_t LDR_GRPPWM = 0x03;
 
 void TLC59208FOutput::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up TLC59208FOutputComponent...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
-  ESP_LOGV(TAG, "  Resetting all devices on the bus...");
+  ESP_LOGV(TAG, "  Resetting all devices on the bus");
 
   // Reset all devices on the bus
   if (this->bus_->write(TLC59208F_SWRST_ADDR >> 1, TLC59208F_SWRST_SEQ, 2) != i2c::ERROR_OK) {
@@ -111,8 +111,10 @@ void TLC59208FOutput::setup() {
 }
 
 void TLC59208FOutput::dump_config() {
-  ESP_LOGCONFIG(TAG, "TLC59208F:");
-  ESP_LOGCONFIG(TAG, "  Mode: 0x%02X", this->mode_);
+  ESP_LOGCONFIG(TAG,
+                "TLC59208F:\n"
+                "  Mode: 0x%02X",
+                this->mode_);
 
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Setting up TLC59208F failed!");

esphome/components/tm1621/tm1621.cpp

@@ -1,7 +1,7 @@
 #include "tm1621.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace tm1621 {
@@ -29,7 +29,7 @@ const uint8_t TM1621_DIGIT_ROW[2][12] = {{0x5F, 0x50, 0x3D, 0x79, 0x72, 0x6B, 0x
                                          {0xF5, 0x05, 0xB6, 0x97, 0x47, 0xD3, 0xF3, 0x85, 0xF7, 0xD7, 0x02, 0x00}};
 
 void TM1621Display::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up TM1621...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->cs_pin_->setup();  // OUTPUT
   this->cs_pin_->digital_write(true);

esphome/components/tm1637/tm1637.cpp

@@ -1,7 +1,7 @@
 #include "tm1637.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace tm1637 {
@@ -125,7 +125,7 @@ const uint8_t TM1637_ASCII_TO_RAW[] PROGMEM = {
     0b01100011,           // '~', ord 0x7E (degree symbol)
 };
 void TM1637Display::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up TM1637...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->clk_pin_->setup();               // OUTPUT
   this->clk_pin_->digital_write(false);  // LOW
@@ -135,10 +135,12 @@ void TM1637Display::setup() {
   this->display();
 }
 void TM1637Display::dump_config() {
-  ESP_LOGCONFIG(TAG, "TM1637:");
-  ESP_LOGCONFIG(TAG, "  Intensity: %d", this->intensity_);
-  ESP_LOGCONFIG(TAG, "  Inverted: %d", this->inverted_);
-  ESP_LOGCONFIG(TAG, "  Length: %d", this->length_);
+  ESP_LOGCONFIG(TAG,
+                "TM1637:\n"
+                "  Intensity: %d\n"
+                "  Inverted: %d\n"
+                "  Length: %d",
+                this->intensity_, this->inverted_, this->length_);
   LOG_PIN("  CLK Pin: ", this->clk_pin_);
   LOG_PIN("  DIO Pin: ", this->dio_pin_);
   LOG_UPDATE_INTERVAL(this);

esphome/components/tm1638/tm1638.cpp

@@ -1,8 +1,8 @@
 #include "tm1638.h"
 #include "sevenseg.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace tm1638 {
@@ -20,7 +20,7 @@ static const uint8_t TM1638_UNKNOWN_CHAR = 0b11111111;
 static const uint8_t TM1638_SHIFT_DELAY = 4;  // clock pause between commands, default 4ms
 
 void TM1638Component::setup() {
-  ESP_LOGD(TAG, "Setting up TM1638...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->clk_pin_->setup();  // OUTPUT
   this->dio_pin_->setup();  // OUTPUT
@@ -43,8 +43,10 @@ void TM1638Component::setup() {
 }
 
 void TM1638Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "TM1638:");
-  ESP_LOGCONFIG(TAG, "  Intensity: %u", this->intensity_);
+  ESP_LOGCONFIG(TAG,
+                "TM1638:\n"
+                "  Intensity: %u",
+                this->intensity_);
   LOG_PIN("  CLK Pin: ", this->clk_pin_);
   LOG_PIN("  DIO Pin: ", this->dio_pin_);
   LOG_PIN("  STB Pin: ", this->stb_pin_);

esphome/components/tm1651/tm1651.cpp

@@ -1,8 +1,8 @@
 #ifdef USE_ARDUINO
 
 #include "tm1651.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace tm1651 {
@@ -17,7 +17,7 @@ static const uint8_t TM1651_BRIGHTNESS_MEDIUM_HW = 2;
 static const uint8_t TM1651_BRIGHTNESS_HIGH_HW = 7;
 
 void TM1651Display::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up TM1651...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint8_t clk = clk_pin_->get_pin();
   uint8_t dio = dio_pin_->get_pin();

esphome/components/tmp102/tmp102.cpp

@@ -15,13 +15,11 @@ static const uint8_t TMP102_REGISTER_HIGH_LIMIT = 0x03;
 
 static const float TMP102_CONVERSION_FACTOR = 0.0625;
 
-void TMP102Component::setup() { ESP_LOGCONFIG(TAG, "Setting up TMP102..."); }
-
 void TMP102Component::dump_config() {
   ESP_LOGCONFIG(TAG, "TMP102:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with TMP102 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this);

esphome/components/tmp102/tmp102.h

@@ -9,10 +9,7 @@ namespace tmp102 {
 
 class TMP102Component : public PollingComponent, public i2c::I2CDevice, public sensor::Sensor {
  public:
-  /// Setup (reset) the sensor and check connection.
-  void setup() override;
   void dump_config() override;
-  /// Update the sensor values (temperature)
   void update() override;
 
   float get_setup_priority() const override;

esphome/components/tmp1075/tmp1075.cpp

@@ -44,17 +44,20 @@ void TMP1075Sensor::update() {
 void TMP1075Sensor::dump_config() {
   LOG_SENSOR("", "TMP1075 Sensor", this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "  Communication with TMP1075 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
-  ESP_LOGCONFIG(TAG, "  limit low  : %.4f °C", alert_limit_low_);
-  ESP_LOGCONFIG(TAG, "  limit high : %.4f °C", alert_limit_high_);
-  ESP_LOGCONFIG(TAG, "  oneshot    : %d", config_.fields.oneshot);
-  ESP_LOGCONFIG(TAG, "  rate       : %d", config_.fields.rate);
-  ESP_LOGCONFIG(TAG, "  fault_count: %d", config_.fields.faults);
-  ESP_LOGCONFIG(TAG, "  polarity   : %d", config_.fields.polarity);
-  ESP_LOGCONFIG(TAG, "  alert_mode : %d", config_.fields.alert_mode);
-  ESP_LOGCONFIG(TAG, "  shutdown   : %d", config_.fields.shutdown);
+  ESP_LOGCONFIG(TAG,
+                "  limit low  : %.4f °C\n"
+                "  limit high : %.4f °C\n"
+                "  oneshot    : %d\n"
+                "  rate       : %d\n"
+                "  fault_count: %d\n"
+                "  polarity   : %d\n"
+                "  alert_mode : %d\n"
+                "  shutdown   : %d",
+                alert_limit_low_, alert_limit_high_, config_.fields.oneshot, config_.fields.rate, config_.fields.faults,
+                config_.fields.polarity, config_.fields.alert_mode, config_.fields.shutdown);
 }
 
 void TMP1075Sensor::set_fault_count(const int faults) {