esphome 2025.5.1__py3-none-any.whl → 2025.6.0b1__py3-none-any.whl

esphome/components/cover/__init__.py

@@ -189,6 +189,7 @@ async def register_cover(var, config):
     if not CORE.has_id(config[CONF_ID]):
         var = cg.Pvariable(config[CONF_ID], var)
     cg.add(cg.App.register_cover(var))
+    CORE.register_platform_component("cover", var)
     await setup_cover_core_(var, config)
 
 

esphome/components/cs5460a/cs5460a.cpp

@@ -52,7 +52,7 @@ bool CS5460AComponent::softreset_() {
 }
 
 void CS5460AComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up CS5460A...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   float current_full_scale = (pga_gain_ == CS5460A_PGA_GAIN_10X) ? 0.25 : 0.10;
   float voltage_full_scale = 0.25;
@@ -319,18 +319,23 @@ bool CS5460AComponent::check_status_() {
 void CS5460AComponent::dump_config() {
   uint32_t state = this->get_component_state();
 
-  ESP_LOGCONFIG(TAG, "CS5460A:");
-  ESP_LOGCONFIG(TAG, "  Init status: %s",
+  ESP_LOGCONFIG(TAG,
+                "CS5460A:\n"
+                "  Init status: %s",
                 state == COMPONENT_STATE_LOOP ? "OK" : (state == COMPONENT_STATE_FAILED ? "failed" : "other"));
   LOG_PIN("  CS Pin: ", cs_);
-  ESP_LOGCONFIG(TAG, "  Samples / cycle: %" PRIu32, samples_);
-  ESP_LOGCONFIG(TAG, "  Phase offset: %i", phase_offset_);
-  ESP_LOGCONFIG(TAG, "  PGA Gain: %s", pga_gain_ == CS5460A_PGA_GAIN_50X ? "50x" : "10x");
-  ESP_LOGCONFIG(TAG, "  Current gain: %.5f", current_gain_);
-  ESP_LOGCONFIG(TAG, "  Voltage gain: %.5f", voltage_gain_);
-  ESP_LOGCONFIG(TAG, "  Current HPF: %s", current_hpf_ ? "enabled" : "disabled");
-  ESP_LOGCONFIG(TAG, "  Voltage HPF: %s", voltage_hpf_ ? "enabled" : "disabled");
-  ESP_LOGCONFIG(TAG, "  Pulse energy: %.2f Wh", pulse_energy_wh_);
+  ESP_LOGCONFIG(TAG,
+                "  Samples / cycle: %" PRIu32 "\n"
+                "  Phase offset: %i\n"
+                "  PGA Gain: %s\n"
+                "  Current gain: %.5f\n"
+                "  Voltage gain: %.5f\n"
+                "  Current HPF: %s\n"
+                "  Voltage HPF: %s\n"
+                "  Pulse energy: %.2f Wh",
+                samples_, phase_offset_, pga_gain_ == CS5460A_PGA_GAIN_50X ? "50x" : "10x", current_gain_,
+                voltage_gain_, current_hpf_ ? "enabled" : "disabled", voltage_hpf_ ? "enabled" : "disabled",
+                pulse_energy_wh_);
   LOG_SENSOR("  ", "Voltage", voltage_sensor_);
   LOG_SENSOR("  ", "Current", current_sensor_);
   LOG_SENSOR("  ", "Power", power_sensor_);

esphome/components/cse7761/cse7761.cpp

@@ -42,7 +42,7 @@ static const uint8_t CSE7761_CMD_ENABLE_WRITE = 0xE5;  // Enable write operation
 enum CSE7761 { RMS_IAC, RMS_IBC, RMS_UC, POWER_PAC, POWER_PBC, POWER_SC, ENERGY_AC, ENERGY_BC };
 
 void CSE7761Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up CSE7761...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->write_(CSE7761_SPECIAL_COMMAND, CSE7761_CMD_RESET);
   uint16_t syscon = this->read_(0x00, 2);  // Default 0x0A04
   if ((0x0A04 == syscon) && this->chip_init_()) {
@@ -57,7 +57,7 @@ void CSE7761Component::setup() {
 void CSE7761Component::dump_config() {
   ESP_LOGCONFIG(TAG, "CSE7761:");
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with CSE7761 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   this->check_uart_settings(38400, 1, uart::UART_CONFIG_PARITY_EVEN, 8);

esphome/components/cse7766/cse7766.cpp

@@ -223,11 +223,6 @@ void CSE7766Component::parse_data_() {
 #endif
 }
 
-uint32_t CSE7766Component::get_24_bit_uint_(uint8_t start_index) {
-  return (uint32_t(this->raw_data_[start_index]) << 16) | (uint32_t(this->raw_data_[start_index + 1]) << 8) |
-         uint32_t(this->raw_data_[start_index + 2]);
-}
-
 void CSE7766Component::dump_config() {
   ESP_LOGCONFIG(TAG, "CSE7766:");
   LOG_SENSOR("  ", "Voltage", this->voltage_sensor_);

esphome/components/cse7766/cse7766.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/uart/uart.h"
 
@@ -28,7 +29,10 @@ class CSE7766Component : public Component, public uart::UARTDevice {
  protected:
   bool check_byte_();
   void parse_data_();
-  uint32_t get_24_bit_uint_(uint8_t start_index);
+  uint32_t get_24_bit_uint_(uint8_t start_index) const {
+    return encode_uint24(this->raw_data_[start_index], this->raw_data_[start_index + 1],
+                         this->raw_data_[start_index + 2]);
+  }
 
   uint8_t raw_data_[24];
   uint8_t raw_data_index_{0};

esphome/components/cst226/touchscreen/cst226_touchscreen.cpp

@@ -6,7 +6,7 @@ namespace cst226 {
 static const char *const TAG = "cst226.touchscreen";
 
 void CST226Touchscreen::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up CST226 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (this->reset_pin_ != nullptr) {
     this->reset_pin_->setup();
     this->reset_pin_->digital_write(true);

esphome/components/cst816/touchscreen/cst816_touchscreen.cpp

@@ -1,4 +1,5 @@
 #include "cst816_touchscreen.h"
+#include "esphome/core/helpers.h"
 
 namespace esphome {
 namespace cst816 {
@@ -38,7 +39,7 @@ void CST816Touchscreen::continue_setup_() {
 }
 
 void CST816Touchscreen::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up CST816 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (this->reset_pin_ != nullptr) {
     this->reset_pin_->setup();
     this->reset_pin_->digital_write(true);
@@ -74,8 +75,10 @@ void CST816Touchscreen::dump_config() {
   LOG_I2C_DEVICE(this);
   LOG_PIN("  Interrupt Pin: ", this->interrupt_pin_);
   LOG_PIN("  Reset Pin: ", this->reset_pin_);
-  ESP_LOGCONFIG(TAG, "  X Raw Min: %d, X Raw Max: %d", this->x_raw_min_, this->x_raw_max_);
-  ESP_LOGCONFIG(TAG, "  Y Raw Min: %d, Y Raw Max: %d", this->y_raw_min_, this->y_raw_max_);
+  ESP_LOGCONFIG(TAG,
+                "  X Raw Min: %d, X Raw Max: %d\n"
+                "  Y Raw Min: %d, Y Raw Max: %d",
+                this->x_raw_min_, this->x_raw_max_, this->y_raw_min_, this->y_raw_max_);
   const char *name;
   switch (this->chip_id_) {
     case CST820_CHIP_ID:

esphome/components/current_based/current_based_cover.cpp

@@ -151,8 +151,10 @@ void CurrentBasedCover::dump_config() {
   if (this->max_duration_ != UINT32_MAX) {
     ESP_LOGCONFIG(TAG, "Maximum duration: %.1fs", this->max_duration_ / 1e3f);
   }
-  ESP_LOGCONFIG(TAG, "Start sensing delay: %.1fs", this->start_sensing_delay_ / 1e3f);
-  ESP_LOGCONFIG(TAG, "Malfunction detection: %s", YESNO(this->malfunction_detection_));
+  ESP_LOGCONFIG(TAG,
+                "Start sensing delay: %.1fs\n"
+                "Malfunction detection: %s",
+                this->start_sensing_delay_ / 1e3f, YESNO(this->malfunction_detection_));
 }
 
 float CurrentBasedCover::get_setup_priority() const { return setup_priority::DATA; }

esphome/components/dac7678/dac7678_output.cpp

@@ -1,7 +1,7 @@
 #include "dac7678_output.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace dac7678 {
@@ -20,9 +20,9 @@ static const uint8_t DAC7678_REG_INTERNAL_REF_0 = 0x80;
 static const uint8_t DAC7678_REG_INTERNAL_REF_1 = 0x90;
 
 void DAC7678Output::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up DAC7678OutputComponent...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
-  ESP_LOGV(TAG, "Resetting device...");
+  ESP_LOGV(TAG, "Resetting device");
 
   // Reset device
   if (!this->write_byte_16(DAC7678_REG_SOFTWARE_RESET, 0x0000)) {

esphome/components/dallas_temp/dallas_temp.cpp

@@ -70,7 +70,7 @@ bool DallasTemperatureSensor::read_scratch_pad_() {
 }
 
 void DallasTemperatureSensor::setup() {
-  ESP_LOGCONFIG(TAG, "setting up Dallas temperature sensor...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (!this->check_address_())
     return;
   if (!this->read_scratch_pad_())
@@ -80,7 +80,7 @@ void DallasTemperatureSensor::setup() {
 
   if ((this->address_ & 0xff) == DALLAS_MODEL_DS18S20) {
     // DS18S20 doesn't support resolution.
-    ESP_LOGW(TAG, "DS18S20 doesn't support setting resolution.");
+    ESP_LOGW(TAG, "DS18S20 doesn't support setting resolution");
     return;
   }
 
@@ -125,7 +125,6 @@ bool DallasTemperatureSensor::check_scratch_pad_() {
             crc8(this->scratch_pad_, 8));
 #endif
   if (!chksum_validity) {
-    ESP_LOGW(TAG, "'%s' - Scratch pad checksum invalid!", this->get_name().c_str());
     this->status_set_warning("scratch pad checksum invalid");
     ESP_LOGD(TAG, "Scratch pad: %02X.%02X.%02X.%02X.%02X.%02X.%02X.%02X.%02X (%02X)", this->scratch_pad_[0],
              this->scratch_pad_[1], this->scratch_pad_[2], this->scratch_pad_[3], this->scratch_pad_[4],

esphome/components/daly_bms/daly_bms.cpp

@@ -1,7 +1,8 @@
 #include "daly_bms.h"
 #include <vector>
-#include "esphome/core/log.h"
 #include "esphome/core/application.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace daly_bms {

esphome/components/dashboard_import/__init__.py

@@ -2,7 +2,6 @@ import base64
 from pathlib import Path
 import re
 import secrets
-from typing import Optional
 
 import requests
 from ruamel.yaml import YAML
@@ -84,7 +83,7 @@ async def to_code(config):
 def import_config(
     path: str,
     name: str,
-    friendly_name: Optional[str],
+    friendly_name: str | None,
     project_name: str,
     import_url: str,
     network: str = CONF_WIFI,

esphome/components/datetime/__init__.py

@@ -158,7 +158,9 @@ async def setup_datetime_core_(var, config):
 async def register_datetime(var, config):
     if not CORE.has_id(config[CONF_ID]):
         var = cg.Pvariable(config[CONF_ID], var)
-    cg.add(getattr(cg.App, f"register_{config[CONF_TYPE].lower()}")(var))
+    entity_type = config[CONF_TYPE].lower()
+    cg.add(getattr(cg.App, f"register_{entity_type}")(var))
+    CORE.register_platform_component(entity_type, var)
     await setup_datetime_core_(var, config)
     cg.add_define(f"USE_DATETIME_{config[CONF_TYPE]}")
 

esphome/components/debug/debug_component.cpp

@@ -2,9 +2,9 @@
 
 #include <algorithm>
 #include "esphome/core/application.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 #include "esphome/core/version.h"
 #include <cinttypes>
 #include <climits>
@@ -15,10 +15,6 @@ namespace debug {
 static const char *const TAG = "debug";
 
 void DebugComponent::dump_config() {
-#ifndef ESPHOME_LOG_HAS_DEBUG
-  return;  // Can't log below if debug logging is disabled
-#endif
-
   ESP_LOGCONFIG(TAG, "Debug component:");
 #ifdef USE_TEXT_SENSOR
   LOG_TEXT_SENSOR("  ", "Device info", this->device_info_);

esphome/components/debug/debug_component.h

@@ -2,8 +2,8 @@
 
 #include "esphome/core/component.h"
 #include "esphome/core/defines.h"
-#include "esphome/core/macros.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/macros.h"
 
 #ifdef USE_SENSOR
 #include "esphome/components/sensor/sensor.h"

esphome/components/debug/debug_esp32.cpp

@@ -107,8 +107,10 @@ std::string DebugComponent::get_wakeup_cause_() {
 }
 
 void DebugComponent::log_partition_info_() {
-  ESP_LOGCONFIG(TAG, "Partition table:");
-  ESP_LOGCONFIG(TAG, "  %-12s %-4s %-8s %-10s %-10s", "Name", "Type", "Subtype", "Address", "Size");
+  ESP_LOGCONFIG(TAG,
+                "Partition table:\n"
+                "  %-12s %-4s %-8s %-10s %-10s",
+                "Name", "Type", "Subtype", "Address", "Size");
   esp_partition_iterator_t it = esp_partition_find(ESP_PARTITION_TYPE_ANY, ESP_PARTITION_SUBTYPE_ANY, NULL);
   while (it != NULL) {
     const esp_partition_t *partition = esp_partition_get(it);

esphome/components/deep_sleep/deep_sleep_component.cpp

@@ -6,24 +6,26 @@ namespace esphome {
 namespace deep_sleep {
 
 static const char *const TAG = "deep_sleep";
+// 5 seconds for deep sleep to ensure clean disconnect from Home Assistant
+static const uint32_t TEARDOWN_TIMEOUT_DEEP_SLEEP_MS = 5000;
 
 bool global_has_deep_sleep = false;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
 
 void DeepSleepComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Deep Sleep...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   global_has_deep_sleep = true;
 
   const optional<uint32_t> run_duration = get_run_duration_();
   if (run_duration.has_value()) {
-    ESP_LOGI(TAG, "Scheduling Deep Sleep to start in %" PRIu32 " ms", *run_duration);
+    ESP_LOGI(TAG, "Scheduling in %" PRIu32 " ms", *run_duration);
     this->set_timeout(*run_duration, [this]() { this->begin_sleep(); });
   } else {
-    ESP_LOGD(TAG, "Not scheduling Deep Sleep, as no run duration is configured.");
+    ESP_LOGD(TAG, "Not scheduling; no run duration configured");
   }
 }
 
 void DeepSleepComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "Setting up Deep Sleep...");
+  ESP_LOGCONFIG(TAG, "Deep sleep:");
   if (this->sleep_duration_.has_value()) {
     uint32_t duration = *this->sleep_duration_ / 1000;
     ESP_LOGCONFIG(TAG, "  Sleep Duration: %" PRIu32 " ms", duration);
@@ -57,11 +59,15 @@ void DeepSleepComponent::begin_sleep(bool manual) {
     return;
   }
 
-  ESP_LOGI(TAG, "Beginning Deep Sleep");
+  ESP_LOGI(TAG, "Beginning sleep");
   if (this->sleep_duration_.has_value()) {
     ESP_LOGI(TAG, "Sleeping for %" PRId64 "us", *this->sleep_duration_);
   }
   App.run_safe_shutdown_hooks();
+  // It's critical to teardown components cleanly for deep sleep to ensure
+  // Home Assistant sees a clean disconnect instead of marking the device unavailable
+  App.teardown_components(TEARDOWN_TIMEOUT_DEEP_SLEEP_MS);
+  App.run_powerdown_hooks();
 
   this->deep_sleep_();
 }

esphome/components/deep_sleep/deep_sleep_esp32.cpp

@@ -46,10 +46,12 @@ void DeepSleepComponent::dump_config_platform_() {
     LOG_PIN("  Wakeup Pin: ", this->wakeup_pin_);
   }
   if (this->wakeup_cause_to_run_duration_.has_value()) {
-    ESP_LOGCONFIG(TAG, "  Default Wakeup Run Duration: %" PRIu32 " ms",
-                  this->wakeup_cause_to_run_duration_->default_cause);
-    ESP_LOGCONFIG(TAG, "  Touch Wakeup Run Duration: %" PRIu32 " ms", this->wakeup_cause_to_run_duration_->touch_cause);
-    ESP_LOGCONFIG(TAG, "  GPIO Wakeup Run Duration: %" PRIu32 " ms", this->wakeup_cause_to_run_duration_->gpio_cause);
+    ESP_LOGCONFIG(TAG,
+                  "  Default Wakeup Run Duration: %" PRIu32 " ms\n"
+                  "  Touch Wakeup Run Duration: %" PRIu32 " ms\n"
+                  "  GPIO Wakeup Run Duration: %" PRIu32 " ms",
+                  this->wakeup_cause_to_run_duration_->default_cause, this->wakeup_cause_to_run_duration_->touch_cause,
+                  this->wakeup_cause_to_run_duration_->gpio_cause);
   }
 }
 
@@ -59,7 +61,7 @@ bool DeepSleepComponent::prepare_to_sleep_() {
     // Defer deep sleep until inactive
     if (!this->next_enter_deep_sleep_) {
       this->status_set_warning();
-      ESP_LOGW(TAG, "Waiting wakeup pin state change to enter deep sleep...");
+      ESP_LOGW(TAG, "Waiting for wakeup pin state change");
     }
     this->next_enter_deep_sleep_ = true;
     return false;