esphome 2025.5.1__py3-none-any.whl → 2025.6.0b1__py3-none-any.whl

esphome/components/max6956/max6956.cpp

@@ -20,7 +20,7 @@ const uint8_t MASK_CURRENT_PIN = 0x0F;
  *    MAX6956                         *
  **************************************/
 void MAX6956::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX6956...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t configuration;
   if (!this->read_reg_(MAX6956_CONFIGURATION, &configuration)) {
     this->mark_failed();
@@ -146,8 +146,10 @@ void MAX6956::dump_config() {
   ESP_LOGCONFIG(TAG, "MAX6956");
 
   if (brightness_mode_ == MAX6956CURRENTMODE::GLOBAL) {
-    ESP_LOGCONFIG(TAG, "current mode: global");
-    ESP_LOGCONFIG(TAG, "global brightness: %u", global_brightness_);
+    ESP_LOGCONFIG(TAG,
+                  "current mode: global\n"
+                  "global brightness: %u",
+                  global_brightness_);
   } else {
     ESP_LOGCONFIG(TAG, "current mode: segment");
   }

esphome/components/max7219/max7219.cpp

@@ -1,7 +1,7 @@
 #include "max7219.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace max7219 {
@@ -116,7 +116,7 @@ const uint8_t MAX7219_ASCII_TO_RAW[95] PROGMEM = {
 
 float MAX7219Component::get_setup_priority() const { return setup_priority::PROCESSOR; }
 void MAX7219Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX7219...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
   this->buffer_ = new uint8_t[this->num_chips_ * 8];  // NOLINT
   for (uint8_t i = 0; i < this->num_chips_ * 8; i++)
@@ -133,9 +133,11 @@ void MAX7219Component::setup() {
   this->send_to_all_(MAX7219_REGISTER_SHUTDOWN, 1);
 }
 void MAX7219Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "MAX7219:");
-  ESP_LOGCONFIG(TAG, "  Number of Chips: %u", this->num_chips_);
-  ESP_LOGCONFIG(TAG, "  Intensity: %u", this->intensity_);
+  ESP_LOGCONFIG(TAG,
+                "MAX7219:\n"
+                "  Number of Chips: %u\n"
+                "  Intensity: %u",
+                this->num_chips_, this->intensity_);
   LOG_PIN("  CS Pin: ", this->cs_);
   LOG_UPDATE_INTERVAL(this);
 }

esphome/components/max7219digit/automation.h

@@ -0,0 +1,52 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/helpers.h"
+
+#include "max7219digit.h"
+
+namespace esphome {
+namespace max7219digit {
+
+template<typename... Ts> class DisplayInvertAction : public Action<Ts...>, public Parented<MAX7219Component> {
+ public:
+  TEMPLATABLE_VALUE(bool, state)
+
+  void play(Ts... x) override {
+    bool state = this->state_.value(x...);
+    this->parent_->invert_on_off(state);
+  }
+};
+
+template<typename... Ts> class DisplayVisibilityAction : public Action<Ts...>, public Parented<MAX7219Component> {
+ public:
+  TEMPLATABLE_VALUE(bool, state)
+
+  void play(Ts... x) override {
+    bool state = this->state_.value(x...);
+    this->parent_->turn_on_off(state);
+  }
+};
+
+template<typename... Ts> class DisplayReverseAction : public Action<Ts...>, public Parented<MAX7219Component> {
+ public:
+  TEMPLATABLE_VALUE(bool, state)
+
+  void play(Ts... x) override {
+    bool state = this->state_.value(x...);
+    this->parent_->set_reverse(state);
+  }
+};
+
+template<typename... Ts> class DisplayIntensityAction : public Action<Ts...>, public Parented<MAX7219Component> {
+ public:
+  TEMPLATABLE_VALUE(uint8_t, state)
+
+  void play(Ts... x) override {
+    uint8_t state = this->state_.value(x...);
+    this->parent_->set_intensity(state);
+  }
+};
+
+}  // namespace max7219digit
+}  // namespace esphome

esphome/components/max7219digit/display.py

@@ -1,7 +1,14 @@
+from esphome import automation
 import esphome.codegen as cg
 from esphome.components import display, spi
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_INTENSITY, CONF_LAMBDA, CONF_NUM_CHIPS
+from esphome.const import (
+    CONF_ID,
+    CONF_INTENSITY,
+    CONF_LAMBDA,
+    CONF_NUM_CHIPS,
+    CONF_STATE,
+)
 
 CODEOWNERS = ["@rspaargaren"]
 DEPENDENCIES = ["spi"]
@@ -17,6 +24,7 @@ CONF_REVERSE_ENABLE = "reverse_enable"
 CONF_NUM_CHIP_LINES = "num_chip_lines"
 CONF_CHIP_LINES_STYLE = "chip_lines_style"
 
+
 integration_ns = cg.esphome_ns.namespace("max7219digit")
 ChipLinesStyle = integration_ns.enum("ChipLinesStyle")
 CHIP_LINES_STYLE = {
@@ -99,3 +107,87 @@ async def to_code(config):
             config[CONF_LAMBDA], [(MAX7219ComponentRef, "it")], return_type=cg.void
         )
         cg.add(var.set_writer(lambda_))
+
+
+DisplayInvertAction = max7219_ns.class_("DisplayInvertAction", automation.Action)
+DisplayVisibilityAction = max7219_ns.class_(
+    "DisplayVisibilityAction", automation.Action
+)
+DisplayReverseAction = max7219_ns.class_("DisplayReverseAction", automation.Action)
+DisplayIntensityAction = max7219_ns.class_("DisplayIntensityAction", automation.Action)
+
+
+MAX7219_OFF_ACTION_SCHEMA = automation.maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(MAX7219Component),
+        cv.Optional(CONF_STATE, default=False): False,
+    }
+)
+
+MAX7219_ON_ACTION_SCHEMA = automation.maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(MAX7219Component),
+        cv.Optional(CONF_STATE, default=True): True,
+    }
+)
+
+
+@automation.register_action(
+    "max7129digit.invert_off", DisplayInvertAction, MAX7219_OFF_ACTION_SCHEMA
+)
+@automation.register_action(
+    "max7129digit.invert_on", DisplayInvertAction, MAX7219_ON_ACTION_SCHEMA
+)
+async def max7129digit_invert_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    cg.add(var.set_state(config[CONF_STATE]))
+    return var
+
+
+@automation.register_action(
+    "max7129digit.turn_off", DisplayVisibilityAction, MAX7219_OFF_ACTION_SCHEMA
+)
+@automation.register_action(
+    "max7129digit.turn_on", DisplayVisibilityAction, MAX7219_ON_ACTION_SCHEMA
+)
+async def max7129digit_visible_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    cg.add(var.set_state(config[CONF_STATE]))
+    return var
+
+
+@automation.register_action(
+    "max7129digit.reverse_off", DisplayReverseAction, MAX7219_OFF_ACTION_SCHEMA
+)
+@automation.register_action(
+    "max7129digit.reverse_on", DisplayReverseAction, MAX7219_ON_ACTION_SCHEMA
+)
+async def max7129digit_reverse_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    cg.add(var.set_state(config[CONF_STATE]))
+    return var
+
+
+MAX7219_INTENSITY_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(MAX7219Component),
+        cv.Optional(CONF_INTENSITY, default=15): cv.templatable(
+            cv.int_range(min=0, max=15)
+        ),
+    },
+    key=CONF_INTENSITY,
+)
+
+
+@automation.register_action(
+    "max7129digit.intensity", DisplayIntensityAction, MAX7219_INTENSITY_SCHEMA
+)
+async def max7129digit_intensity_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    template_ = await cg.templatable(config[CONF_INTENSITY], args, cg.uint8)
+    cg.add(var.set_state(template_))
+    return var

esphome/components/max7219digit/max7219digit.cpp

@@ -1,8 +1,8 @@
 #include "max7219digit.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
-#include "esphome/core/hal.h"
 #include "esphome/core/application.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 #include "max7219font.h"
 
 #include <algorithm>
@@ -26,7 +26,7 @@ constexpr uint8_t MAX7219_DISPLAY_TEST = 0x01;
 float MAX7219Component::get_setup_priority() const { return setup_priority::PROCESSOR; }
 
 void MAX7219Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX7219_DIGITS...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
   this->stepsleft_ = 0;
   for (int chip_line = 0; chip_line < this->num_chip_lines_; chip_line++) {
@@ -50,15 +50,18 @@ void MAX7219Component::setup() {
 }
 
 void MAX7219Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "MAX7219DIGIT:");
-  ESP_LOGCONFIG(TAG, "  Number of Chips: %u", this->num_chips_);
-  ESP_LOGCONFIG(TAG, "  Number of Chips Lines: %u", this->num_chip_lines_);
-  ESP_LOGCONFIG(TAG, "  Chips Lines Style : %u", this->chip_lines_style_);
-  ESP_LOGCONFIG(TAG, "  Intensity: %u", this->intensity_);
-  ESP_LOGCONFIG(TAG, "  Scroll Mode: %u", this->scroll_mode_);
-  ESP_LOGCONFIG(TAG, "  Scroll Speed: %u", this->scroll_speed_);
-  ESP_LOGCONFIG(TAG, "  Scroll Dwell: %u", this->scroll_dwell_);
-  ESP_LOGCONFIG(TAG, "  Scroll Delay: %u", this->scroll_delay_);
+  ESP_LOGCONFIG(TAG,
+                "MAX7219DIGIT:\n"
+                "  Number of Chips: %u\n"
+                "  Number of Chips Lines: %u\n"
+                "  Chips Lines Style : %u\n"
+                "  Intensity: %u\n"
+                "  Scroll Mode: %u\n"
+                "  Scroll Speed: %u\n"
+                "  Scroll Dwell: %u\n"
+                "  Scroll Delay: %u",
+                this->num_chips_, this->num_chip_lines_, this->chip_lines_style_, this->intensity_, this->scroll_mode_,
+                this->scroll_speed_, this->scroll_dwell_, this->scroll_delay_);
   LOG_PIN("  CS Pin: ", this->cs_);
   LOG_UPDATE_INTERVAL(this);
 }

esphome/components/max9611/max9611.cpp

@@ -29,8 +29,9 @@ static const uint8_t SETUP_DELAY = 4;         // Wait 2 integration periods.
 static const float VOUT_LSB = 14.0 / 1000.0;  // 14mV/LSB
 static const float TEMP_LSB = 0.48;           // 0.48C/LSB
 static const float MICRO_VOLTS_PER_VOLT = 1000000.0;
+
 void MAX9611Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up max9611...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // Perform dummy-read
   uint8_t value;
   this->read(&value, 1);
@@ -41,18 +42,20 @@ void MAX9611Component::setup() {
   const uint8_t fast_mode_dat[] = {CONTROL_REGISTER_1_ADRR, MAX9611Multiplexer::MAX9611_MULTIPLEXER_FAST_MODE};
 
   if (this->write(reinterpret_cast<const uint8_t *>(&setup_dat), sizeof(setup_dat)) != ErrorCode::ERROR_OK) {
-    ESP_LOGE(TAG, "Failed to setup Max9611 during GAIN SET");
+    ESP_LOGE(TAG, "GAIN SET failed");
     return;
   }
   delay(SETUP_DELAY);
   if (this->write(reinterpret_cast<const uint8_t *>(&fast_mode_dat), sizeof(fast_mode_dat)) != ErrorCode::ERROR_OK) {
-    ESP_LOGE(TAG, "Failed to setup Max9611 during FAST MODE SET");
+    ESP_LOGE(TAG, "FAST MODE SET failed");
     return;
   }
 }
 void MAX9611Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "Dump Config max9611...");
-  ESP_LOGCONFIG(TAG, "    CSA Gain Register: %x", gain_);
+  ESP_LOGCONFIG(TAG,
+                "MAX9611:\n"
+                "    CSA Gain Register: %x",
+                gain_);
   LOG_I2C_DEVICE(this);
 }
 void MAX9611Component::update() {
@@ -62,7 +65,7 @@ void MAX9611Component::update() {
   // Just read the entire register map in a bulk read, faster than individually querying register.
   const ErrorCode read_result = this->read(register_map_, sizeof(register_map_));
   if (write_result != ErrorCode::ERROR_OK || read_result != ErrorCode::ERROR_OK) {
-    ESP_LOGW(TAG, "MAX9611 Update FAILED!");
+    ESP_LOGW(TAG, "Update failed");
     return;
   }
   uint16_t csa_register = ((register_map_[CSA_DATA_BYTE_MSB_ADRR] << 8) | (register_map_[CSA_DATA_BYTE_LSB_ADRR])) >> 4;

esphome/components/mcp23008/mcp23008.cpp

@@ -7,7 +7,7 @@ namespace mcp23008 {
 static const char *const TAG = "mcp23008";
 
 void MCP23008::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23008...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg(mcp23x08_base::MCP23X08_IOCON, &iocon)) {
     this->mark_failed();

esphome/components/mcp23016/mcp23016.cpp

@@ -8,7 +8,7 @@ namespace mcp23016 {
 static const char *const TAG = "mcp23016";
 
 void MCP23016::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23016...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg_(MCP23016_IOCON0, &iocon)) {
     this->mark_failed();

esphome/components/mcp23017/mcp23017.cpp

@@ -7,7 +7,7 @@ namespace mcp23017 {
 static const char *const TAG = "mcp23017";
 
 void MCP23017::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23017...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg(mcp23x17_base::MCP23X17_IOCONA, &iocon)) {
     this->mark_failed();

esphome/components/mcp23s08/mcp23s08.cpp

@@ -13,7 +13,7 @@ void MCP23S08::set_device_address(uint8_t device_addr) {
 }
 
 void MCP23S08::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23S08...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 
   this->enable();

esphome/components/mcp23s17/mcp23s17.cpp

@@ -13,7 +13,7 @@ void MCP23S17::set_device_address(uint8_t device_addr) {
 }
 
 void MCP23S17::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23S17...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 
   this->enable();

esphome/components/mcp3008/mcp3008.cpp

@@ -11,7 +11,7 @@ static const char *const TAG = "mcp3008";
 float MCP3008::get_setup_priority() const { return setup_priority::HARDWARE; }
 
 void MCP3008::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp3008");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 }
 

esphome/components/mcp3008/sensor/mcp3008_sensor.cpp

@@ -10,9 +10,11 @@ static const char *const TAG = "mcp3008.sensor";
 float MCP3008Sensor::get_setup_priority() const { return setup_priority::DATA; }
 
 void MCP3008Sensor::dump_config() {
-  ESP_LOGCONFIG(TAG, "MCP3008Sensor:");
-  ESP_LOGCONFIG(TAG, "  Pin: %u", this->pin_);
-  ESP_LOGCONFIG(TAG, "  Reference Voltage: %.2fV", this->reference_voltage_);
+  ESP_LOGCONFIG(TAG,
+                "MCP3008Sensor:\n"
+                "  Pin: %u\n"
+                "  Reference Voltage: %.2fV",
+                this->pin_, this->reference_voltage_);
 }
 
 float MCP3008Sensor::sample() {

esphome/components/mcp3204/mcp3204.cpp

@@ -9,7 +9,7 @@ static const char *const TAG = "mcp3204";
 float MCP3204::get_setup_priority() const { return setup_priority::HARDWARE; }
 
 void MCP3204::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp3204");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 }
 

esphome/components/mcp4461/mcp4461.cpp

@@ -1,7 +1,7 @@
 #include "mcp4461.h"
 
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
 
 namespace esphome {
 namespace mcp4461 {
@@ -10,7 +10,7 @@ static const char *const TAG = "mcp4461";
 constexpr uint8_t EEPROM_WRITE_TIMEOUT_MS = 10;
 
 void Mcp4461Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp4461 using address (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->error_code_ = MCP4461_STATUS_I2C_ERROR;

esphome/components/mcp4725/mcp4725.cpp

@@ -7,7 +7,7 @@ namespace mcp4725 {
 static const char *const TAG = "mcp4725";
 
 void MCP4725::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP4725 (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->error_code_ = COMMUNICATION_FAILED;
@@ -20,7 +20,7 @@ void MCP4725::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->error_code_ == COMMUNICATION_FAILED) {
-    ESP_LOGE(TAG, "Communication with MCP4725 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 

esphome/components/mcp4728/mcp4728.cpp

@@ -9,7 +9,7 @@ namespace mcp4728 {
 static const char *const TAG = "mcp4728";
 
 void MCP4728Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP4728 (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->mark_failed();
@@ -21,7 +21,7 @@ void MCP4728Component::dump_config() {
   ESP_LOGCONFIG(TAG, "MCP4728:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with MCP4728 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 

esphome/components/mcp9600/mcp9600.cpp

@@ -28,7 +28,7 @@ static const uint8_t MCP9600_REGISTER_ALERT4_LIMIT = 0x13;
 static const uint8_t MCP9600_REGISTER_DEVICE_ID = 0x20;
 
 void MCP9600Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP9600...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint16_t dev_id = 0;
   this->read_byte_16(MCP9600_REGISTER_DEVICE_ID, &dev_id);

esphome/components/mcp9808/mcp9808.cpp

@@ -18,18 +18,18 @@ static const uint8_t MCP9808_AMBIENT_TEMP_NEGATIVE = 0x10;
 static const char *const TAG = "mcp9808";
 
 void MCP9808Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up %s...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
 
   uint16_t manu = 0;
   if (!this->read_byte_16(MCP9808_REG_MANUF_ID, &manu) || manu != MCP9808_MANUF_ID) {
     this->mark_failed();
-    ESP_LOGE(TAG, "%s manufacuturer id failed, device returned %X", this->name_.c_str(), manu);
+    ESP_LOGE(TAG, "Incorrect manufacturer ID (%X) for '%s'", manu, this->name_.c_str());
     return;
   }
   uint16_t dev_id = 0;
   if (!this->read_byte_16(MCP9808_REG_DEVICE_ID, &dev_id) || dev_id != MCP9808_DEV_ID) {
     this->mark_failed();
-    ESP_LOGE(TAG, "%s device id failed, device returned %X", this->name_.c_str(), dev_id);
+    ESP_LOGE(TAG, "Incorrect device ID (%X) for '%s'", dev_id, this->name_.c_str());
     return;
   }
 }
@@ -37,7 +37,7 @@ void MCP9808Sensor::dump_config() {
   ESP_LOGCONFIG(TAG, "%s:", this->name_.c_str());
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with %s failed!", this->name_.c_str());
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL_FOR, this->name_.c_str());
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this);

esphome/components/mdns/mdns_component.cpp

@@ -59,6 +59,8 @@ void MDNSComponent::compile_records_() {
     service.txt_records.push_back({"network", "wifi"});
 #elif defined(USE_ETHERNET)
     service.txt_records.push_back({"network", "ethernet"});
+#elif defined(USE_OPENTHREAD)
+    service.txt_records.push_back({"network", "thread"});
 #endif
 
 #ifdef USE_API_NOISE
@@ -117,8 +119,10 @@ void MDNSComponent::compile_records_() {
 }
 
 void MDNSComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "mDNS:");
-  ESP_LOGCONFIG(TAG, "  Hostname: %s", this->hostname_.c_str());
+  ESP_LOGCONFIG(TAG,
+                "mDNS:\n"
+                "  Hostname: %s",
+                this->hostname_.c_str());
   ESP_LOGV(TAG, "  Services:");
   for (const auto &service : this->services_) {
     ESP_LOGV(TAG, "  - %s, %s, %d", service.service_type.c_str(), service.proto.c_str(),
@@ -130,6 +134,8 @@ void MDNSComponent::dump_config() {
   }
 }
 
+std::vector<MDNSService> MDNSComponent::get_services() { return this->services_; }
+
 }  // namespace mdns
 }  // namespace esphome
 #endif

esphome/components/mdns/mdns_component.h

@@ -33,10 +33,12 @@ class MDNSComponent : public Component {
 #if (defined(USE_ESP8266) || defined(USE_RP2040)) && defined(USE_ARDUINO)
   void loop() override;
 #endif
-  float get_setup_priority() const override { return setup_priority::AFTER_WIFI; }
+  float get_setup_priority() const override { return setup_priority::AFTER_CONNECTION; }
 
   void add_extra_service(MDNSService service) { services_extra_.push_back(std::move(service)); }
 
+  std::vector<MDNSService> get_services();
+
   void on_shutdown() override;
 
  protected:

esphome/components/mdns/mdns_esp32.cpp

@@ -17,7 +17,7 @@ void MDNSComponent::setup() {
 
   esp_err_t err = mdns_init();
   if (err != ESP_OK) {
-    ESP_LOGW(TAG, "mDNS init failed: %s", esp_err_to_name(err));
+    ESP_LOGW(TAG, "Init failed: %s", esp_err_to_name(err));
     this->mark_failed();
     return;
   }
@@ -45,7 +45,7 @@ void MDNSComponent::setup() {
     }
 
     if (err != ESP_OK) {
-      ESP_LOGW(TAG, "Failed to register mDNS service %s: %s", service.service_type.c_str(), esp_err_to_name(err));
+      ESP_LOGW(TAG, "Failed to register service %s: %s", service.service_type.c_str(), esp_err_to_name(err));
     }
   }
 }

esphome/components/media_player/__init__.py

@@ -103,6 +103,7 @@ async def register_media_player(var, config):
     if not CORE.has_id(config[CONF_ID]):
         var = cg.Pvariable(config[CONF_ID], var)
     cg.add(cg.App.register_media_player(var))
+    CORE.register_platform_component("media_player", var)
     await setup_media_player_core_(var, config)
 
 

esphome/components/micro_wake_word/micro_wake_word.cpp

@@ -72,7 +72,7 @@ void MicroWakeWord::dump_config() {
 }
 
 void MicroWakeWord::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up microWakeWord...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->frontend_config_.window.size_ms = FEATURE_DURATION_MS;
   this->frontend_config_.window.step_size_ms = this->features_step_size_;

esphome/components/micro_wake_word/streaming_model.cpp

@@ -11,15 +11,19 @@ namespace esphome {
 namespace micro_wake_word {
 
 void WakeWordModel::log_model_config() {
-  ESP_LOGCONFIG(TAG, "    - Wake Word: %s", this->wake_word_.c_str());
-  ESP_LOGCONFIG(TAG, "      Probability cutoff: %.2f", this->probability_cutoff_ / 255.0f);
-  ESP_LOGCONFIG(TAG, "      Sliding window size: %d", this->sliding_window_size_);
+  ESP_LOGCONFIG(TAG,
+                "    - Wake Word: %s\n"
+                "      Probability cutoff: %.2f\n"
+                "      Sliding window size: %d",
+                this->wake_word_.c_str(), this->probability_cutoff_ / 255.0f, this->sliding_window_size_);
 }
 
 void VADModel::log_model_config() {
-  ESP_LOGCONFIG(TAG, "    - VAD Model");
-  ESP_LOGCONFIG(TAG, "      Probability cutoff: %.2f", this->probability_cutoff_ / 255.0f);
-  ESP_LOGCONFIG(TAG, "      Sliding window size: %d", this->sliding_window_size_);
+  ESP_LOGCONFIG(TAG,
+                "    - VAD Model\n"
+                "      Probability cutoff: %.2f\n"
+                "      Sliding window size: %d",
+                this->probability_cutoff_ / 255.0f, this->sliding_window_size_);
 }
 
 bool StreamingModel::load_model_() {

esphome/components/micronova/micronova.h

@@ -1,10 +1,10 @@
 #pragma once
 
-#include "esphome/core/component.h"
 #include "esphome/components/uart/uart.h"
-#include "esphome/core/log.h"
+#include "esphome/core/component.h"
 #include "esphome/core/defines.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 #include <vector>
 

esphome/components/mics_4514/mics_4514.cpp

@@ -12,11 +12,11 @@ static const uint8_t SENSOR_REGISTER = 0x04;
 static const uint8_t POWER_MODE_REGISTER = 0x0a;
 
 void MICS4514Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MICS 4514...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t power_mode;
   this->read_register(POWER_MODE_REGISTER, &power_mode, 1);
   if (power_mode == 0x00) {
-    ESP_LOGCONFIG(TAG, "Waking up MICS 4514, sensors will have data after 3 minutes...");
+    ESP_LOGCONFIG(TAG, "Waking up MICS 4514, sensors will have data after 3 minutes");
     power_mode = 0x01;
     this->write_register(POWER_MODE_REGISTER, &power_mode, 1);
     delay(100);  // NOLINT