esphome 2025.5.1__py3-none-any.whl → 2025.6.0__py3-none-any.whl

esphome/components/lc709203f/lc709203f.h

@@ -0,0 +1,55 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace lc709203f {
+
+enum LC709203FState {
+  STATE_INIT,
+  STATE_RSOC,
+  STATE_TEMP_SETUP,
+  STATE_NORMAL,
+};
+
+/// Enum listing allowable voltage settings for the LC709203F.
+enum LC709203FBatteryVoltage {
+  LC709203F_BATTERY_VOLTAGE_3_8 = 0x0000,
+  LC709203F_BATTERY_VOLTAGE_3_7 = 0x0001,
+};
+
+class Lc709203f : public sensor::Sensor, public PollingComponent, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void update() override;
+  void dump_config() override;
+
+  void set_pack_size(uint16_t pack_size);
+  void set_thermistor_b_constant(uint16_t b_constant);
+  void set_pack_voltage(LC709203FBatteryVoltage pack_voltage);
+  void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
+  void set_battery_remaining_sensor(sensor::Sensor *battery_remaining_sensor) {
+    battery_remaining_sensor_ = battery_remaining_sensor;
+  }
+  void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
+
+ private:
+  uint8_t get_register_(uint8_t register_to_read, uint16_t *register_value);
+  uint8_t set_register_(uint8_t register_to_set, uint16_t value_to_set);
+  uint8_t crc8_(uint8_t *byte_buffer, uint8_t length_of_crc);
+
+ protected:
+  sensor::Sensor *voltage_sensor_{nullptr};
+  sensor::Sensor *battery_remaining_sensor_{nullptr};
+  sensor::Sensor *temperature_sensor_{nullptr};
+  uint16_t pack_size_;
+  uint16_t apa_;
+  uint16_t b_constant_;
+  LC709203FState state_ = STATE_INIT;
+  uint16_t pack_voltage_;
+};
+
+}  // namespace lc709203f
+}  // namespace esphome

esphome/components/lc709203f/sensor.py

@@ -0,0 +1,93 @@
+import esphome.codegen as cg
+from esphome.components import i2c, sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_BATTERY_LEVEL,
+    CONF_BATTERY_VOLTAGE,
+    CONF_ID,
+    CONF_SIZE,
+    CONF_TEMPERATURE,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_BATTERY,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_PERCENT,
+    UNIT_VOLT,
+)
+
+DEPENDENCIES = ["i2c"]
+
+lc709203f_ns = cg.esphome_ns.namespace("lc709203f")
+
+CONF_B_CONSTANT = "b_constant"
+
+LC709203FBatteryVoltage = lc709203f_ns.enum("LC709203FBatteryVoltage")
+BATTERY_VOLTAGE_OPTIONS = {
+    "3.7": LC709203FBatteryVoltage.LC709203F_BATTERY_VOLTAGE_3_7,
+    "3.8": LC709203FBatteryVoltage.LC709203F_BATTERY_VOLTAGE_3_8,
+}
+
+lc709203f = lc709203f_ns.class_("Lc709203f", cg.PollingComponent, i2c.I2CDevice)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(lc709203f),
+            cv.Optional(CONF_SIZE, default="500"): cv.int_range(100, 3000),
+            cv.Optional(CONF_VOLTAGE, default="3.7"): cv.enum(
+                BATTERY_VOLTAGE_OPTIONS, upper=True
+            ),
+            cv.Optional(CONF_BATTERY_VOLTAGE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT,
+                accuracy_decimals=3,
+                device_class=DEVICE_CLASS_VOLTAGE,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+            cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=3,
+                device_class=DEVICE_CLASS_BATTERY,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ).extend(
+                {
+                    cv.Required(CONF_B_CONSTANT): cv.int_range(0, 0xFFFF),
+                }
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x0B))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+    cg.add(var.set_pack_size(config.get(CONF_SIZE)))
+    cg.add(var.set_pack_voltage(BATTERY_VOLTAGE_OPTIONS[config[CONF_VOLTAGE]]))
+
+    if voltage_config := config.get(CONF_BATTERY_VOLTAGE):
+        sens = await sensor.new_sensor(voltage_config)
+        cg.add(var.set_voltage_sensor(sens))
+
+    if level_config := config.get(CONF_BATTERY_LEVEL):
+        sens = await sensor.new_sensor(level_config)
+        cg.add(var.set_battery_remaining_sensor(sens))
+
+    if temp_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temp_config)
+        cg.add(var.set_temperature_sensor(sens))
+        cg.add(var.set_thermistor_b_constant(temp_config[CONF_B_CONSTANT]))

esphome/components/lcd_base/lcd_display.cpp

@@ -1,7 +1,7 @@
 #include "lcd_display.h"
-#include "esphome/core/log.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace lcd_base {

esphome/components/lcd_gpio/gpio_lcd_display.cpp

@@ -7,7 +7,7 @@ namespace lcd_gpio {
 static const char *const TAG = "lcd_gpio";
 
 void GPIOLCDDisplay::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up GPIO LCD Display...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->rs_pin_->setup();  // OUTPUT
   this->rs_pin_->digital_write(false);
   if (this->rw_pin_ != nullptr) {
@@ -24,8 +24,10 @@ void GPIOLCDDisplay::setup() {
   LCDDisplay::setup();
 }
 void GPIOLCDDisplay::dump_config() {
-  ESP_LOGCONFIG(TAG, "GPIO LCD Display:");
-  ESP_LOGCONFIG(TAG, "  Columns: %u, Rows: %u", this->columns_, this->rows_);
+  ESP_LOGCONFIG(TAG,
+                "GPIO LCD Display:\n"
+                "  Columns: %u, Rows: %u",
+                this->columns_, this->rows_);
   LOG_PIN("  RS Pin: ", this->rs_pin_);
   LOG_PIN("  RW Pin: ", this->rw_pin_);
   LOG_PIN("  Enable Pin: ", this->enable_pin_);

esphome/components/lcd_menu/lcd_menu.cpp

@@ -19,10 +19,12 @@ void LCDCharacterMenuComponent::setup() {
 float LCDCharacterMenuComponent::get_setup_priority() const { return setup_priority::PROCESSOR - 1.0f; }
 
 void LCDCharacterMenuComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "LCD Menu");
-  ESP_LOGCONFIG(TAG, "  Columns: %u, Rows: %u", this->columns_, this->rows_);
-  ESP_LOGCONFIG(TAG, "  Mark characters: %02x, %02x, %02x, %02x", this->mark_selected_, this->mark_editing_,
-                this->mark_submenu_, this->mark_back_);
+  ESP_LOGCONFIG(TAG,
+                "LCD Menu\n"
+                "  Columns: %u, Rows: %u\n"
+                "  Mark characters: %02x, %02x, %02x, %02x",
+                this->columns_, this->rows_, this->mark_selected_, this->mark_editing_, this->mark_submenu_,
+                this->mark_back_);
   if (this->is_failed()) {
     ESP_LOGE(TAG, "The connected display failed, the menu is disabled!");
   }

esphome/components/lcd_pcf8574/pcf8574_display.cpp

@@ -11,7 +11,7 @@ static const uint8_t LCD_DISPLAY_BACKLIGHT_ON = 0x08;
 static const uint8_t LCD_DISPLAY_BACKLIGHT_OFF = 0x00;
 
 void PCF8574LCDDisplay::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCF8574 LCD Display...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->backlight_value_ = LCD_DISPLAY_BACKLIGHT_ON;
   if (!this->write_bytes(this->backlight_value_, nullptr, 0)) {
     this->mark_failed();
@@ -21,12 +21,14 @@ void PCF8574LCDDisplay::setup() {
   LCDDisplay::setup();
 }
 void PCF8574LCDDisplay::dump_config() {
-  ESP_LOGCONFIG(TAG, "PCF8574 LCD Display:");
-  ESP_LOGCONFIG(TAG, "  Columns: %u, Rows: %u", this->columns_, this->rows_);
+  ESP_LOGCONFIG(TAG,
+                "PCF8574 LCD Display:\n"
+                "  Columns: %u, Rows: %u",
+                this->columns_, this->rows_);
   LOG_I2C_DEVICE(this);
   LOG_UPDATE_INTERVAL(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with LCD Display failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 void PCF8574LCDDisplay::write_n_bits(uint8_t value, uint8_t n) {

esphome/components/ld2410/ld2410.cpp

@@ -72,17 +72,16 @@ void LD2410Component::dump_config() {
   }
 #endif
   this->read_all_info();
-  ESP_LOGCONFIG(TAG, "  Throttle_ : %ums", this->throttle_);
-  ESP_LOGCONFIG(TAG, "  MAC Address : %s", const_cast<char *>(this->mac_.c_str()));
-  ESP_LOGCONFIG(TAG, "  Firmware Version : %s", const_cast<char *>(this->version_.c_str()));
+  ESP_LOGCONFIG(TAG,
+                "  Throttle_ : %ums\n"
+                "  MAC Address : %s\n"
+                "  Firmware Version : %s",
+                this->throttle_, const_cast<char *>(this->mac_.c_str()), const_cast<char *>(this->version_.c_str()));
 }
 
 void LD2410Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LD2410...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->read_all_info();
-  ESP_LOGCONFIG(TAG, "Mac Address : %s", const_cast<char *>(this->mac_.c_str()));
-  ESP_LOGCONFIG(TAG, "Firmware Version : %s", const_cast<char *>(this->version_.c_str()));
-  ESP_LOGCONFIG(TAG, "LD2410 setup complete.");
 }
 
 void LD2410Component::read_all_info() {

esphome/components/ld2420/ld2420.cpp

@@ -65,9 +65,11 @@ static const char *const TAG = "ld2420";
 float LD2420Component::get_setup_priority() const { return setup_priority::BUS; }
 
 void LD2420Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "LD2420:");
-  ESP_LOGCONFIG(TAG, "  Firmware Version : %7s", this->ld2420_firmware_ver_);
-  ESP_LOGCONFIG(TAG, "LD2420 Number:");
+  ESP_LOGCONFIG(TAG,
+                "LD2420:\n"
+                "  Firmware Version : %7s\n"
+                "LD2420 Number:",
+                this->ld2420_firmware_ver_);
 #ifdef USE_NUMBER
   LOG_NUMBER(TAG, "  Gate Timeout:", this->gate_timeout_number_);
   LOG_NUMBER(TAG, "  Gate Max Distance:", this->max_gate_distance_number_);
@@ -111,7 +113,7 @@ int LD2420Component::get_firmware_int_(const char *version_string) {
 }
 
 void LD2420Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LD2420...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (this->set_config_mode(true) == LD2420_ERROR_TIMEOUT) {
     ESP_LOGE(TAG, "LD2420 module has failed to respond, check baud rate and serial connections.");
     this->mark_failed();
@@ -158,7 +160,7 @@ void LD2420Component::apply_config_action() {
     ESP_LOGCONFIG(TAG, "No configuration change detected");
     return;
   }
-  ESP_LOGCONFIG(TAG, "Reconfiguring LD2420...");
+  ESP_LOGCONFIG(TAG, "Reconfiguring LD2420");
   if (this->set_config_mode(true) == LD2420_ERROR_TIMEOUT) {
     ESP_LOGE(TAG, "LD2420 module has failed to respond, check baud rate and serial connections.");
     this->mark_failed();
@@ -180,7 +182,7 @@ void LD2420Component::apply_config_action() {
 }
 
 void LD2420Component::factory_reset_action() {
-  ESP_LOGCONFIG(TAG, "Setting factory defaults...");
+  ESP_LOGCONFIG(TAG, "Setting factory defaults");
   if (this->set_config_mode(true) == LD2420_ERROR_TIMEOUT) {
     ESP_LOGE(TAG, "LD2420 module has failed to respond, check baud rate and serial connections.");
     this->mark_failed();
@@ -209,7 +211,7 @@ void LD2420Component::factory_reset_action() {
 }
 
 void LD2420Component::restart_module_action() {
-  ESP_LOGCONFIG(TAG, "Restarting LD2420 module...");
+  ESP_LOGCONFIG(TAG, "Restarting LD2420 module");
   this->send_module_restart();
   this->set_timeout(250, [this]() {
     this->set_config_mode(true);

esphome/components/ld2450/ld2450.cpp

@@ -109,7 +109,7 @@ static inline std::string format_version(uint8_t *buffer) {
 LD2450Component::LD2450Component() {}
 
 void LD2450Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up HLK-LD2450...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 #ifdef USE_NUMBER
   if (this->presence_timeout_number_ != nullptr) {
     this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_object_id_hash());
@@ -188,9 +188,11 @@ void LD2450Component::dump_config() {
 #ifdef USE_NUMBER
   LOG_NUMBER("  ", "PresenceTimeoutNumber", this->presence_timeout_number_);
 #endif
-  ESP_LOGCONFIG(TAG, "  Throttle : %ums", this->throttle_);
-  ESP_LOGCONFIG(TAG, "  MAC Address : %s", const_cast<char *>(this->mac_.c_str()));
-  ESP_LOGCONFIG(TAG, "  Firmware version : %s", const_cast<char *>(this->version_.c_str()));
+  ESP_LOGCONFIG(TAG,
+                "  Throttle : %ums\n"
+                "  MAC Address : %s\n"
+                "  Firmware version : %s",
+                this->throttle_, const_cast<char *>(this->mac_.c_str()), const_cast<char *>(this->version_.c_str()));
 }
 
 void LD2450Component::loop() {

esphome/components/ld2450/sensor.py

@@ -6,6 +6,8 @@ from esphome.const import (
     CONF_DISTANCE,
     CONF_RESOLUTION,
     CONF_SPEED,
+    CONF_X,
+    CONF_Y,
     DEVICE_CLASS_DISTANCE,
     DEVICE_CLASS_SPEED,
     UNIT_DEGREES,
@@ -19,8 +21,6 @@ DEPENDENCIES = ["ld2450"]
 CONF_MOVING_TARGET_COUNT = "moving_target_count"
 CONF_STILL_TARGET_COUNT = "still_target_count"
 CONF_TARGET_COUNT = "target_count"
-CONF_X = "x"
-CONF_Y = "y"
 
 ICON_ACCOUNT_GROUP = "mdi:account-group"
 ICON_ACCOUNT_SWITCH = "mdi:account-switch"

esphome/components/ledc/ledc_output.cpp

@@ -46,11 +46,13 @@ inline ledc_mode_t get_speed_mode(uint8_t) { return LEDC_LOW_SPEED_MODE; }
 #endif
 #endif
 
-float ledc_max_frequency_for_bit_depth(uint8_t bit_depth) { return CLOCK_FREQUENCY / float(1 << bit_depth); }
+float ledc_max_frequency_for_bit_depth(uint8_t bit_depth) {
+  return static_cast<float>(CLOCK_FREQUENCY) / static_cast<float>(1 << bit_depth);
+}
 
 float ledc_min_frequency_for_bit_depth(uint8_t bit_depth, bool low_frequency) {
   const float max_div_num = ((1 << MAX_RES_BITS) - 1) / (low_frequency ? 32.0f : 256.0f);
-  return CLOCK_FREQUENCY / (max_div_num * float(1 << bit_depth));
+  return static_cast<float>(CLOCK_FREQUENCY) / (max_div_num * static_cast<float>(1 << bit_depth));
 }
 
 optional<uint8_t> ledc_bit_depth_for_frequency(float frequency) {
@@ -100,13 +102,13 @@ esp_err_t configure_timer_frequency(ledc_mode_t speed_mode, ledc_timer_t timer_n
 
 #ifdef USE_ESP_IDF
 constexpr int ledc_angle_to_htop(float angle, uint8_t bit_depth) {
-  return static_cast<int>(angle * ((1U << bit_depth) - 1) / 360.);
+  return static_cast<int>(angle * ((1U << bit_depth) - 1) / 360.0f);
 }
 #endif  // USE_ESP_IDF
 
 void LEDCOutput::write_state(float state) {
-  if (!initialized_) {
-    ESP_LOGW(TAG, "LEDC output hasn't been initialized yet!");
+  if (!this->initialized_) {
+    ESP_LOGW(TAG, "Not yet initialized");
     return;
   }
 
@@ -122,8 +124,8 @@ void LEDCOutput::write_state(float state) {
   ledcWrite(this->channel_, duty);
 #endif
 #ifdef USE_ESP_IDF
-  auto speed_mode = get_speed_mode(channel_);
-  auto chan_num = static_cast<ledc_channel_t>(channel_ % 8);
+  auto speed_mode = get_speed_mode(this->channel_);
+  auto chan_num = static_cast<ledc_channel_t>(this->channel_ % 8);
   int hpoint = ledc_angle_to_htop(this->phase_angle_, this->bit_depth_);
   if (duty == max_duty) {
     ledc_stop(speed_mode, chan_num, 1);
@@ -137,7 +139,7 @@ void LEDCOutput::write_state(float state) {
 }
 
 void LEDCOutput::setup() {
-  ESP_LOGV(TAG, "Entering setup...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 #ifdef USE_ARDUINO
   this->update_frequency(this->frequency_);
   this->turn_off();
@@ -145,9 +147,9 @@ void LEDCOutput::setup() {
   ledcAttachPin(this->pin_->get_pin(), this->channel_);
 #endif
 #ifdef USE_ESP_IDF
-  auto speed_mode = get_speed_mode(channel_);
-  auto timer_num = static_cast<ledc_timer_t>((channel_ % 8) / 2);
-  auto chan_num = static_cast<ledc_channel_t>(channel_ % 8);
+  auto speed_mode = get_speed_mode(this->channel_);
+  auto timer_num = static_cast<ledc_timer_t>((this->channel_ % 8) / 2);
+  auto chan_num = static_cast<ledc_channel_t>(this->channel_ % 8);
 
   esp_err_t timer_init_result =
       configure_timer_frequency(speed_mode, timer_num, chan_num, this->channel_, this->bit_depth_, this->frequency_);
@@ -163,26 +165,28 @@ void LEDCOutput::setup() {
   ESP_LOGV(TAG, "Angle of %.1f° results in hpoint %u", this->phase_angle_, hpoint);
 
   ledc_channel_config_t chan_conf{};
-  chan_conf.gpio_num = pin_->get_pin();
+  chan_conf.gpio_num = this->pin_->get_pin();
   chan_conf.speed_mode = speed_mode;
   chan_conf.channel = chan_num;
   chan_conf.intr_type = LEDC_INTR_DISABLE;
   chan_conf.timer_sel = timer_num;
-  chan_conf.duty = inverted_ == pin_->is_inverted() ? 0 : (1U << bit_depth_);
+  chan_conf.duty = this->inverted_ == this->pin_->is_inverted() ? 0 : (1U << this->bit_depth_);
   chan_conf.hpoint = hpoint;
   ledc_channel_config(&chan_conf);
-  initialized_ = true;
+  this->initialized_ = true;
   this->status_clear_error();
 #endif
 }
 
 void LEDCOutput::dump_config() {
-  ESP_LOGCONFIG(TAG, "LEDC Output:");
+  ESP_LOGCONFIG(TAG, "Output:");
   LOG_PIN("  Pin ", this->pin_);
-  ESP_LOGCONFIG(TAG, "  LEDC Channel: %u", this->channel_);
-  ESP_LOGCONFIG(TAG, "  PWM Frequency: %.1f Hz", this->frequency_);
-  ESP_LOGCONFIG(TAG, "  Phase angle: %.1f°", this->phase_angle_);
-  ESP_LOGCONFIG(TAG, "  Bit depth: %u", this->bit_depth_);
+  ESP_LOGCONFIG(TAG,
+                "  Channel: %u\n"
+                "  PWM Frequency: %.1f Hz\n"
+                "  Phase angle: %.1f°\n"
+                "  Bit depth: %u",
+                this->channel_, this->frequency_, this->phase_angle_, this->bit_depth_);
   ESP_LOGV(TAG, "  Max frequency for bit depth: %f", ledc_max_frequency_for_bit_depth(this->bit_depth_));
   ESP_LOGV(TAG, "  Min frequency for bit depth: %f",
            ledc_min_frequency_for_bit_depth(this->bit_depth_, (this->frequency_ < 100)));
@@ -205,17 +209,17 @@ void LEDCOutput::update_frequency(float frequency) {
   this->bit_depth_ = bit_depth_opt.value_or(8);
   this->frequency_ = frequency;
 #ifdef USE_ARDUINO
-  ESP_LOGV(TAG, "Using Arduino API - Trying to define channel, frequency and bit depth...");
+  ESP_LOGV(TAG, "Using Arduino API - Trying to define channel, frequency and bit depth");
   u_int32_t configured_frequency = 0;
 
   // Configure LEDC channel, frequency and bit depth with fallback
   int attempt_count_max = SETUP_ATTEMPT_COUNT_MAX;
   while (attempt_count_max > 0 && configured_frequency == 0) {
-    ESP_LOGV(TAG, "Trying initialize channel %u with frequency %.1f and bit depth of %u...", this->channel_,
-             this->frequency_, this->bit_depth_);
+    ESP_LOGV(TAG, "Initializing channel %u with frequency %.1f and bit depth of %u", this->channel_, this->frequency_,
+             this->bit_depth_);
     configured_frequency = ledcSetup(this->channel_, frequency, this->bit_depth_);
     if (configured_frequency != 0) {
-      initialized_ = true;
+      this->initialized_ = true;
       this->status_clear_error();
       ESP_LOGV(TAG, "Configured frequency: %u with bit depth: %u", configured_frequency, this->bit_depth_);
     } else {
@@ -236,14 +240,14 @@ void LEDCOutput::update_frequency(float frequency) {
 
 #endif  // USE_ARDUINO
 #ifdef USE_ESP_IDF
-  if (!initialized_) {
-    ESP_LOGW(TAG, "LEDC output hasn't been initialized yet!");
+  if (!this->initialized_) {
+    ESP_LOGW(TAG, "Not yet initialized");
     return;
   }
 
-  auto speed_mode = get_speed_mode(channel_);
-  auto timer_num = static_cast<ledc_timer_t>((channel_ % 8) / 2);
-  auto chan_num = static_cast<ledc_channel_t>(channel_ % 8);
+  auto speed_mode = get_speed_mode(this->channel_);
+  auto timer_num = static_cast<ledc_timer_t>((this->channel_ % 8) / 2);
+  auto chan_num = static_cast<ledc_channel_t>(this->channel_ % 8);
 
   esp_err_t timer_init_result =
       configure_timer_frequency(speed_mode, timer_num, chan_num, this->channel_, this->bit_depth_, this->frequency_);

esphome/components/libretiny/const.py

@@ -1,5 +1,5 @@
+from collections.abc import Callable
 from dataclasses import dataclass
-from typing import Callable
 
 import esphome.codegen as cg
 

esphome/components/libretiny/preferences.cpp

@@ -1,8 +1,8 @@
 #ifdef USE_LIBRETINY
 
-#include "esphome/core/preferences.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/preferences.h"
 #include <flashdb.h>
 #include <cstring>
 #include <vector>
@@ -101,7 +101,7 @@ class LibreTinyPreferences : public ESPPreferences {
     if (s_pending_save.empty())
       return true;
 
-    ESP_LOGD(TAG, "Saving %d preferences to flash...", s_pending_save.size());
+    ESP_LOGV(TAG, "Saving %d items...", s_pending_save.size());
     // goal try write all pending saves even if one fails
     int cached = 0, written = 0, failed = 0;
     fdb_err_t last_err = FDB_NO_ERR;
@@ -129,11 +129,10 @@ class LibreTinyPreferences : public ESPPreferences {
       }
       s_pending_save.erase(s_pending_save.begin() + i);
     }
-    ESP_LOGD(TAG, "Saving %d preferences to flash: %d cached, %d written, %d failed", cached + written + failed, cached,
-             written, failed);
+    ESP_LOGD(TAG, "Writing %d items: %d cached, %d written, %d failed", cached + written + failed, cached, written,
+             failed);
     if (failed > 0) {
-      ESP_LOGE(TAG, "Error saving %d preferences to flash. Last error=%d for key=%s", failed, last_err,
-               last_key.c_str());
+      ESP_LOGE(TAG, "Writing %d items failed. Last error=%d for key=%s", failed, last_err, last_key.c_str());
     }
 
     return failed == 0;
@@ -158,7 +157,7 @@ class LibreTinyPreferences : public ESPPreferences {
   }
 
   bool reset() override {
-    ESP_LOGD(TAG, "Cleaning up preferences in flash...");
+    ESP_LOGD(TAG, "Erasing storage");
     s_pending_save.clear();
 
     fdb_kv_set_default(&db);

esphome/components/light/__init__.py

@@ -37,7 +37,7 @@ from esphome.const import (
     CONF_WEB_SERVER,
     CONF_WHITE,
 )
-from esphome.core import coroutine_with_priority
+from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_generator import MockObjClass
 from esphome.cpp_helpers import setup_entity
 
@@ -270,6 +270,7 @@ async def setup_light_core_(light_var, output_var, config):
 async def register_light(output_var, config):
     light_var = cg.new_Pvariable(config[CONF_ID], output_var)
     cg.add(cg.App.register_light(light_var))
+    CORE.register_platform_component("light", light_var)
     await cg.register_component(light_var, config)
     await setup_light_core_(light_var, output_var, config)
 

esphome/components/light/esp_hsv_color.h

@@ -1,7 +1,7 @@
 #pragma once
 
-#include "esphome/core/helpers.h"
 #include "esphome/core/color.h"
+#include "esphome/core/helpers.h"
 
 namespace esphome {
 namespace light {

esphome/components/light/light_state.cpp

@@ -18,7 +18,7 @@ LightCall LightState::toggle() { return this->make_call().set_state(!this->remot
 LightCall LightState::make_call() { return LightCall(this); }
 
 void LightState::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up light '%s'...", this->get_name().c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->get_name().c_str());
 
   this->output_->setup_state(this);
   for (auto *effect : this->effects_) {
@@ -91,12 +91,16 @@ void LightState::setup() {
 void LightState::dump_config() {
   ESP_LOGCONFIG(TAG, "Light '%s'", this->get_name().c_str());
   if (this->get_traits().supports_color_capability(ColorCapability::BRIGHTNESS)) {
-    ESP_LOGCONFIG(TAG, "  Default Transition Length: %.1fs", this->default_transition_length_ / 1e3f);
-    ESP_LOGCONFIG(TAG, "  Gamma Correct: %.2f", this->gamma_correct_);
+    ESP_LOGCONFIG(TAG,
+                  "  Default Transition Length: %.1fs\n"
+                  "  Gamma Correct: %.2f",
+                  this->default_transition_length_ / 1e3f, this->gamma_correct_);
   }
   if (this->get_traits().supports_color_capability(ColorCapability::COLOR_TEMPERATURE)) {
-    ESP_LOGCONFIG(TAG, "  Min Mireds: %.1f", this->get_traits().get_min_mireds());
-    ESP_LOGCONFIG(TAG, "  Max Mireds: %.1f", this->get_traits().get_max_mireds());
+    ESP_LOGCONFIG(TAG,
+                  "  Min Mireds: %.1f\n"
+                  "  Max Mireds: %.1f",
+                  this->get_traits().get_min_mireds(), this->get_traits().get_max_mireds());
   }
 }
 void LightState::loop() {

esphome/components/light/light_state.h

@@ -17,7 +17,7 @@ namespace light {
 
 class LightOutput;
 
-enum LightRestoreMode {
+enum LightRestoreMode : uint8_t {
   LIGHT_RESTORE_DEFAULT_OFF,
   LIGHT_RESTORE_DEFAULT_ON,
   LIGHT_ALWAYS_OFF,
@@ -212,12 +212,18 @@ class LightState : public EntityBase, public Component {
 
   /// Store the output to allow effects to have more access.
   LightOutput *output_;
-  /// Value for storing the index of the currently active effect. 0 if no effect is active
-  uint32_t active_effect_index_{};
   /// The currently active transformer for this light (transition/flash).
   std::unique_ptr<LightTransformer> transformer_{nullptr};
-  /// Whether the light value should be written in the next cycle.
-  bool next_write_{true};
+  /// List of effects for this light.
+  std::vector<LightEffect *> effects_;
+  /// Value for storing the index of the currently active effect. 0 if no effect is active
+  uint32_t active_effect_index_{};
+  /// Default transition length for all transitions in ms.
+  uint32_t default_transition_length_{};
+  /// Transition length to use for flash transitions.
+  uint32_t flash_transition_length_{};
+  /// Gamma correction factor for the light.
+  float gamma_correct_{};
 
   /// Object used to store the persisted values of the light.
   ESPPreferenceObject rtc_;
@@ -236,19 +242,13 @@ class LightState : public EntityBase, public Component {
    */
   CallbackManager<void()> target_state_reached_callback_{};
 
-  /// Default transition length for all transitions in ms.
-  uint32_t default_transition_length_{};
-  /// Transition length to use for flash transitions.
-  uint32_t flash_transition_length_{};
-  /// Gamma correction factor for the light.
-  float gamma_correct_{};
-  /// Restore mode of the light.
-  LightRestoreMode restore_mode_;
   /// Initial state of the light.
   optional<LightStateRTCState> initial_state_{};
-  /// List of effects for this light.
-  std::vector<LightEffect *> effects_;
 
+  /// Restore mode of the light.
+  LightRestoreMode restore_mode_;
+  /// Whether the light value should be written in the next cycle.
+  bool next_write_{true};
   // for effects, true if a transformer (transition) is active.
   bool is_transformer_active_ = false;
 };