esphome 2025.5.1__py3-none-any.whl → 2025.6.0__py3-none-any.whl

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -39,7 +39,7 @@ void BluetoothProxy::send_bluetooth_scanner_state_(esp32_ble_tracker::ScannerSta
   resp.state = static_cast<api::enums::BluetoothScannerState>(state);
   resp.mode = this->parent_->get_scan_active() ? api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_ACTIVE
                                                : api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_PASSIVE;
-  this->api_connection_->send_bluetooth_scanner_state_response(resp);
+  this->api_connection_->send_message(resp);
 }
 
 bool BluetoothProxy::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
@@ -58,7 +58,7 @@ static std::vector<api::BluetoothLERawAdvertisement> &get_batch_buffer() {
   return batch_buffer;
 }
 
-bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_param *advertisements, size_t count) {
+bool BluetoothProxy::parse_devices(const esp32_ble::BLEScanResult *scan_results, size_t count) {
   if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr || !this->raw_advertisements_)
     return false;
 
@@ -73,7 +73,7 @@ bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_p
 
   // Add new advertisements to the batch buffer
   for (size_t i = 0; i < count; i++) {
-    auto &result = advertisements[i];
+    auto &result = scan_results[i];
     uint8_t length = result.adv_data_len + result.scan_rsp_len;
 
     batch_buffer.emplace_back();
@@ -103,7 +103,7 @@ void BluetoothProxy::flush_pending_advertisements() {
 
   api::BluetoothLERawAdvertisementsResponse resp;
   resp.advertisements.swap(batch_buffer);
-  this->api_connection_->send_bluetooth_le_raw_advertisements_response(resp);
+  this->api_connection_->send_message(resp);
 }
 
 void BluetoothProxy::send_api_packet_(const esp32_ble_tracker::ESPBTDevice &device) {
@@ -141,14 +141,16 @@ void BluetoothProxy::send_api_packet_(const esp32_ble_tracker::ESPBTDevice &devi
     manufacturer_data.data.assign(data.data.begin(), data.data.end());
   }
 
-  this->api_connection_->send_bluetooth_le_advertisement(resp);
+  this->api_connection_->send_message(resp);
 }
 
 void BluetoothProxy::dump_config() {
   ESP_LOGCONFIG(TAG, "Bluetooth Proxy:");
-  ESP_LOGCONFIG(TAG, "  Active: %s", YESNO(this->active_));
-  ESP_LOGCONFIG(TAG, "  Connections: %d", this->connections_.size());
-  ESP_LOGCONFIG(TAG, "  Raw advertisements: %s", YESNO(this->raw_advertisements_));
+  ESP_LOGCONFIG(TAG,
+                "  Active: %s\n"
+                "  Connections: %d\n"
+                "  Raw advertisements: %s",
+                YESNO(this->active_), this->connections_.size(), YESNO(this->raw_advertisements_));
 }
 
 int BluetoothProxy::get_bluetooth_connections_free() {
@@ -300,7 +302,7 @@ void BluetoothProxy::loop() {
         service_resp.characteristics.push_back(std::move(characteristic_resp));
       }
       resp.services.push_back(std::move(service_resp));
-      this->api_connection_->send_bluetooth_gatt_get_services_response(resp);
+      this->api_connection_->send_message(resp);
     }
   }
 }
@@ -453,7 +455,7 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
       call.success = ret == ESP_OK;
       call.error = ret;
 
-      this->api_connection_->send_bluetooth_device_clear_cache_response(call);
+      this->api_connection_->send_message(call);
 
       break;
     }
@@ -577,7 +579,7 @@ void BluetoothProxy::send_device_connection(uint64_t address, bool connected, ui
   call.connected = connected;
   call.mtu = mtu;
   call.error = error;
-  this->api_connection_->send_bluetooth_device_connection_response(call);
+  this->api_connection_->send_message(call);
 }
 void BluetoothProxy::send_connections_free() {
   if (this->api_connection_ == nullptr)
@@ -590,7 +592,7 @@ void BluetoothProxy::send_connections_free() {
       call.allocated.push_back(connection->address_);
     }
   }
-  this->api_connection_->send_bluetooth_connections_free_response(call);
+  this->api_connection_->send_message(call);
 }
 
 void BluetoothProxy::send_gatt_services_done(uint64_t address) {
@@ -598,7 +600,7 @@ void BluetoothProxy::send_gatt_services_done(uint64_t address) {
     return;
   api::BluetoothGATTGetServicesDoneResponse call;
   call.address = address;
-  this->api_connection_->send_bluetooth_gatt_get_services_done_response(call);
+  this->api_connection_->send_message(call);
 }
 
 void BluetoothProxy::send_gatt_error(uint64_t address, uint16_t handle, esp_err_t error) {
@@ -608,7 +610,7 @@ void BluetoothProxy::send_gatt_error(uint64_t address, uint16_t handle, esp_err_
   call.address = address;
   call.handle = handle;
   call.error = error;
-  this->api_connection_->send_bluetooth_gatt_error_response(call);
+  this->api_connection_->send_message(call);
 }
 
 void BluetoothProxy::send_device_pairing(uint64_t address, bool paired, esp_err_t error) {
@@ -617,7 +619,7 @@ void BluetoothProxy::send_device_pairing(uint64_t address, bool paired, esp_err_
   call.paired = paired;
   call.error = error;
 
-  this->api_connection_->send_bluetooth_device_pairing_response(call);
+  this->api_connection_->send_message(call);
 }
 
 void BluetoothProxy::send_device_unpairing(uint64_t address, bool success, esp_err_t error) {
@@ -626,7 +628,7 @@ void BluetoothProxy::send_device_unpairing(uint64_t address, bool success, esp_e
   call.success = success;
   call.error = error;
 
-  this->api_connection_->send_bluetooth_device_unpairing_response(call);
+  this->api_connection_->send_message(call);
 }
 
 void BluetoothProxy::bluetooth_scanner_set_mode(bool active) {

esphome/components/bluetooth_proxy/bluetooth_proxy.h

@@ -52,7 +52,7 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
  public:
   BluetoothProxy();
   bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
-  bool parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_param *advertisements, size_t count) override;
+  bool parse_devices(const esp32_ble::BLEScanResult *scan_results, size_t count) override;
   void dump_config() override;
   void setup() override;
   void loop() override;

esphome/components/bme280_base/bme280_base.cpp

@@ -88,14 +88,13 @@ const char *oversampling_to_str(BME280Oversampling oversampling) {  // NOLINT
 }
 
 void BME280Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BME280...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t chip_id = 0;
 
   // Mark as not failed before initializing. Some devices will turn off sensors to save on batteries
   // and when they come back on, the COMPONENT_STATE_FAILED bit must be unset on the component.
-  if ((this->component_state_ & COMPONENT_STATE_MASK) == COMPONENT_STATE_FAILED) {
-    this->component_state_ &= ~COMPONENT_STATE_MASK;
-    this->component_state_ |= COMPONENT_STATE_CONSTRUCTION;
+  if (this->is_failed()) {
+    this->reset_to_construction_state();
   }
 
   if (!this->read_byte(BME280_REGISTER_CHIPID, &chip_id)) {
@@ -182,7 +181,7 @@ void BME280Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BME280:");
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BME280 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
       ESP_LOGE(TAG, "BME280 has wrong chip ID! Is it a BME280?");
@@ -207,7 +206,7 @@ inline uint8_t oversampling_to_time(BME280Oversampling over_sampling) { return (
 
 void BME280Component::update() {
   // Enable sensor
-  ESP_LOGV(TAG, "Sending conversion request...");
+  ESP_LOGV(TAG, "Sending conversion request");
   uint8_t meas_value = 0;
   meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
   meas_value |= (this->pressure_oversampling_ & 0b111) << 2;

esphome/components/bme680/bme680.cpp

@@ -71,7 +71,7 @@ static const char *iir_filter_to_str(BME680IIRFilter filter) {
 }
 
 void BME680Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BME680...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t chip_id;
   if (!this->read_byte(BME680_REGISTER_CHIPID, &chip_id) || chip_id != 0x61) {
     this->mark_failed();
@@ -215,7 +215,7 @@ void BME680Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BME680:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with BME680 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  IIR Filter: %s", iir_filter_to_str(this->iir_filter_));
   LOG_UPDATE_INTERVAL(this);
@@ -307,7 +307,7 @@ void BME680Component::read_data_() {
       this->humidity_sensor_->publish_state(NAN);
     if (this->gas_resistance_sensor_ != nullptr)
       this->gas_resistance_sensor_->publish_state(NAN);
-    ESP_LOGW(TAG, "Communication with BME680 failed!");
+    ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return;
   }

esphome/components/bme680/sensor.py

@@ -13,7 +13,7 @@ from esphome.const import (
     CONF_PRESSURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
     DEVICE_CLASS_TEMPERATURE,
     ICON_GAS_CYLINDER,
     STATE_CLASS_MEASUREMENT,
@@ -71,7 +71,7 @@ CONFIG_SCHEMA = (
             cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
                 unit_of_measurement=UNIT_HECTOPASCAL,
                 accuracy_decimals=1,
-                device_class=DEVICE_CLASS_PRESSURE,
+                device_class=DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
                 state_class=STATE_CLASS_MEASUREMENT,
             ).extend(
                 {

esphome/components/bme680_bsec/bme680_bsec.cpp

@@ -1,6 +1,6 @@
 #include "bme680_bsec.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 #include <string>
 
 namespace esphome {
@@ -15,7 +15,7 @@ std::vector<BME680BSECComponent *>
 uint8_t BME680BSECComponent::work_buffer_[BSEC_MAX_WORKBUFFER_SIZE] = {0};
 
 void BME680BSECComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BME680(%s) via BSEC...", this->device_id_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->device_id_.c_str());
 
   uint8_t new_idx = BME680BSECComponent::instances.size();
   BME680BSECComponent::instances.push_back(this);
@@ -159,11 +159,15 @@ void BME680BSECComponent::dump_config() {
              this->bme680_status_);
   }
 
-  ESP_LOGCONFIG(TAG, "  Temperature Offset: %.2f", this->temperature_offset_);
-  ESP_LOGCONFIG(TAG, "  IAQ Mode: %s", this->iaq_mode_ == IAQ_MODE_STATIC ? "Static" : "Mobile");
-  ESP_LOGCONFIG(TAG, "  Supply Voltage: %sV", this->supply_voltage_ == SUPPLY_VOLTAGE_3V3 ? "3.3" : "1.8");
-  ESP_LOGCONFIG(TAG, "  Sample Rate: %s", BME680_BSEC_SAMPLE_RATE_LOG(this->sample_rate_));
-  ESP_LOGCONFIG(TAG, "  State Save Interval: %ims", this->state_save_interval_ms_);
+  ESP_LOGCONFIG(TAG,
+                "  Temperature Offset: %.2f\n"
+                "  IAQ Mode: %s\n"
+                "  Supply Voltage: %sV\n"
+                "  Sample Rate: %s\n"
+                "  State Save Interval: %ims",
+                this->temperature_offset_, this->iaq_mode_ == IAQ_MODE_STATIC ? "Static" : "Mobile",
+                this->supply_voltage_ == SUPPLY_VOLTAGE_3V3 ? "3.3" : "1.8",
+                BME680_BSEC_SAMPLE_RATE_LOG(this->sample_rate_), this->state_save_interval_ms_);
 
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   ESP_LOGCONFIG(TAG, "    Sample Rate: %s", BME680_BSEC_SAMPLE_RATE_LOG(this->temperature_sample_rate_));

esphome/components/bme680_bsec/sensor.py

@@ -15,6 +15,8 @@ from esphome.const import (
     DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
     ICON_GAS_CYLINDER,
     ICON_GAUGE,
+    ICON_THERMOMETER,
+    ICON_WATER_PERCENT,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_HECTOPASCAL,
@@ -27,11 +29,11 @@ from . import CONF_BME680_BSEC_ID, SAMPLE_RATE_OPTIONS, BME680BSECComponent
 
 DEPENDENCIES = ["bme680_bsec"]
 
-CONF_IAQ = "iaq"
-CONF_CO2_EQUIVALENT = "co2_equivalent"
 CONF_BREATH_VOC_EQUIVALENT = "breath_voc_equivalent"
-UNIT_IAQ = "IAQ"
+CONF_CO2_EQUIVALENT = "co2_equivalent"
+CONF_IAQ = "iaq"
 ICON_ACCURACY = "mdi:checkbox-marked-circle-outline"
+UNIT_IAQ = "IAQ"
 
 TYPES = [
     CONF_TEMPERATURE,
@@ -49,6 +51,7 @@ CONFIG_SCHEMA = cv.Schema(
         cv.GenerateID(CONF_BME680_BSEC_ID): cv.use_id(BME680BSECComponent),
         cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
             unit_of_measurement=UNIT_CELSIUS,
+            icon=ICON_THERMOMETER,
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_TEMPERATURE,
             state_class=STATE_CLASS_MEASUREMENT,
@@ -65,6 +68,7 @@ CONFIG_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
             unit_of_measurement=UNIT_PERCENT,
+            icon=ICON_WATER_PERCENT,
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_HUMIDITY,
             state_class=STATE_CLASS_MEASUREMENT,

esphome/components/bme68x_bsec2/__init__.py

@@ -16,7 +16,7 @@ CODEOWNERS = ["@neffs", "@kbx81"]
 
 DOMAIN = "bme68x_bsec2"
 
-BSEC2_LIBRARY_VERSION = "v1.8.2610"
+BSEC2_LIBRARY_VERSION = "1.10.2610"
 
 CONF_ALGORITHM_OUTPUT = "algorithm_output"
 CONF_BME68X_BSEC2_ID = "bme68x_bsec2_id"
@@ -145,7 +145,6 @@ CONFIG_SCHEMA_BASE = (
             ): cv.positive_time_period_minutes,
         },
     )
-    .add_extra(cv.only_with_arduino)
     .add_extra(validate_bme68x)
     .add_extra(download_bme68x_blob)
 )
@@ -179,11 +178,13 @@ async def to_code_base(config):
     bsec2_arr = cg.progmem_array(config[CONF_RAW_DATA_ID], rhs)
     cg.add(var.set_bsec2_configuration(bsec2_arr, len(rhs)))
 
-    # Although this component does not use SPI, the BSEC2 library requires the SPI library
-    cg.add_library("SPI", None)
+    # Although this component does not use SPI, the BSEC2 Arduino library requires the SPI library
+    if core.CORE.using_arduino:
+        cg.add_library("SPI", None)
     cg.add_library(
         "BME68x Sensor library",
-        "1.1.40407",
+        "1.3.40408",
+        "https://github.com/boschsensortec/Bosch-BME68x-Library",
     )
     cg.add_library(
         "BSEC2 Software Library",

esphome/components/bme68x_bsec2/bme68x_bsec2.cpp

@@ -1,4 +1,5 @@
 #include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
@@ -20,7 +21,7 @@ static const char *const TAG = "bme68x_bsec2.sensor";
 static const std::string IAQ_ACCURACY_STATES[4] = {"Stabilizing", "Uncertain", "Calibrating", "Calibrated"};
 
 void BME68xBSEC2Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BME68X via BSEC2...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->bsec_status_ = bsec_init_m(&this->bsec_instance_);
   if (this->bsec_status_ != BSEC_OK) {
@@ -57,13 +58,13 @@ void BME68xBSEC2Component::setup() {
 }
 
 void BME68xBSEC2Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "BME68X via BSEC2:");
-
-  ESP_LOGCONFIG(TAG, "  BSEC2 version: %d.%d.%d.%d", this->version_.major, this->version_.minor,
-                this->version_.major_bugfix, this->version_.minor_bugfix);
-
-  ESP_LOGCONFIG(TAG, "  BSEC2 configuration blob:");
-  ESP_LOGCONFIG(TAG, "    Configured: %s", YESNO(this->bsec2_blob_configured_));
+  ESP_LOGCONFIG(TAG,
+                "BME68X via BSEC2:\n"
+                "  BSEC2 version: %d.%d.%d.%d\n"
+                "  BSEC2 configuration blob:\n"
+                "    Configured: %s",
+                this->version_.major, this->version_.minor, this->version_.major_bugfix, this->version_.minor_bugfix,
+                YESNO(this->bsec2_blob_configured_));
   if (this->bsec2_configuration_ != nullptr && this->bsec2_configuration_length_) {
     ESP_LOGCONFIG(TAG, "    Size: %" PRIu32, this->bsec2_configuration_length_);
   }
@@ -76,11 +77,14 @@ void BME68xBSEC2Component::dump_config() {
   if (this->algorithm_output_ != ALGORITHM_OUTPUT_IAQ) {
     ESP_LOGCONFIG(TAG, "  Algorithm output: %s", BME68X_BSEC2_ALGORITHM_OUTPUT_LOG(this->algorithm_output_));
   }
-  ESP_LOGCONFIG(TAG, "  Operating age: %s", BME68X_BSEC2_OPERATING_AGE_LOG(this->operating_age_));
-  ESP_LOGCONFIG(TAG, "  Sample rate: %s", BME68X_BSEC2_SAMPLE_RATE_LOG(this->sample_rate_));
-  ESP_LOGCONFIG(TAG, "  Voltage: %s", BME68X_BSEC2_VOLTAGE_LOG(this->voltage_));
-  ESP_LOGCONFIG(TAG, "  State save interval: %ims", this->state_save_interval_ms_);
-  ESP_LOGCONFIG(TAG, "  Temperature offset: %.2f", this->temperature_offset_);
+  ESP_LOGCONFIG(TAG,
+                "  Operating age: %s\n"
+                "  Sample rate: %s\n"
+                "  Voltage: %s\n"
+                "  State save interval: %ims\n"
+                "  Temperature offset: %.2f",
+                BME68X_BSEC2_OPERATING_AGE_LOG(this->operating_age_), BME68X_BSEC2_SAMPLE_RATE_LOG(this->sample_rate_),
+                BME68X_BSEC2_VOLTAGE_LOG(this->voltage_), this->state_save_interval_ms_, this->temperature_offset_);
 
 #ifdef USE_SENSOR
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);

esphome/components/bme68x_bsec2/sensor.py

@@ -9,8 +9,10 @@ from esphome.const import (
     CONF_SAMPLE_RATE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
+    DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
     ICON_GAS_CYLINDER,
     ICON_GAUGE,
     ICON_THERMOMETER,
@@ -32,7 +34,6 @@ CONF_CO2_EQUIVALENT = "co2_equivalent"
 CONF_IAQ = "iaq"
 CONF_IAQ_STATIC = "iaq_static"
 ICON_ACCURACY = "mdi:checkbox-marked-circle-outline"
-ICON_TEST_TUBE = "mdi:test-tube"
 UNIT_IAQ = "IAQ"
 
 TYPES = [
@@ -61,7 +62,6 @@ CONFIG_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
             unit_of_measurement=UNIT_HECTOPASCAL,
-            icon=ICON_GAUGE,
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
             state_class=STATE_CLASS_MEASUREMENT,
@@ -102,14 +102,14 @@ CONFIG_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_CO2_EQUIVALENT): sensor.sensor_schema(
             unit_of_measurement=UNIT_PARTS_PER_MILLION,
-            icon=ICON_TEST_TUBE,
             accuracy_decimals=1,
+            device_class=DEVICE_CLASS_CARBON_DIOXIDE,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
         cv.Optional(CONF_BREATH_VOC_EQUIVALENT): sensor.sensor_schema(
             unit_of_measurement=UNIT_PARTS_PER_MILLION,
-            icon=ICON_TEST_TUBE,
             accuracy_decimals=1,
+            device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
     }

esphome/components/bme68x_bsec2_i2c/bme68x_bsec2_i2c.cpp

@@ -1,4 +1,5 @@
 #include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 

esphome/components/bmi160/bmi160.cpp

@@ -119,44 +119,44 @@ const float GRAVITY_EARTH = 9.80665f;
 void BMI160Component::internal_setup_(int stage) {
   switch (stage) {
     case 0:
-      ESP_LOGCONFIG(TAG, "Setting up BMI160...");
+      ESP_LOGCONFIG(TAG, "Running setup");
       uint8_t chipid;
       if (!this->read_byte(BMI160_REGISTER_CHIPID, &chipid) || (chipid != 0b11010001)) {
         this->mark_failed();
         return;
       }
 
-      ESP_LOGV(TAG, "  Bringing accelerometer out of sleep...");
+      ESP_LOGV(TAG, "  Bringing accelerometer out of sleep");
       if (!this->write_byte(BMI160_REGISTER_CMD, (uint8_t) Cmd::ACCL_SET_PMU_MODE | (uint8_t) AcclPmuMode::NORMAL)) {
         this->mark_failed();
         return;
       }
-      ESP_LOGV(TAG, "  Waiting for accelerometer to wake up...");
+      ESP_LOGV(TAG, "  Waiting for accelerometer to wake up");
       // need to wait (max delay in datasheet) because we can't send commands while another is in progress
       // min 5ms, 10ms
       this->set_timeout(10, [this]() { this->internal_setup_(1); });
       break;
 
     case 1:
-      ESP_LOGV(TAG, "  Bringing gyroscope out of sleep...");
+      ESP_LOGV(TAG, "  Bringing gyroscope out of sleep");
       if (!this->write_byte(BMI160_REGISTER_CMD, (uint8_t) Cmd::GYRO_SET_PMU_MODE | (uint8_t) GyroPmuMode::NORMAL)) {
         this->mark_failed();
         return;
       }
-      ESP_LOGV(TAG, "  Waiting for gyroscope to wake up...");
+      ESP_LOGV(TAG, "  Waiting for gyroscope to wake up");
       // wait between 51 & 81ms, doing 100 to be safe
       this->set_timeout(10, [this]() { this->internal_setup_(2); });
       break;
 
     case 2:
-      ESP_LOGV(TAG, "  Setting up Gyro Config...");
+      ESP_LOGV(TAG, "  Setting up Gyro Config");
       uint8_t gyro_config = (uint8_t) GyroBandwidth::OSR4 | (uint8_t) GyroOuputDataRate::HZ_25;
       ESP_LOGV(TAG, "  Output gyro_config: 0b" BYTE_TO_BINARY_PATTERN, BYTE_TO_BINARY(gyro_config));
       if (!this->write_byte(BMI160_REGISTER_GYRO_CONFIG, gyro_config)) {
         this->mark_failed();
         return;
       }
-      ESP_LOGV(TAG, "  Setting up Gyro Range...");
+      ESP_LOGV(TAG, "  Setting up Gyro Range");
       uint8_t gyro_range = (uint8_t) GyroRange::RANGE_2000_DPS;
       ESP_LOGV(TAG, "  Output gyro_range: 0b" BYTE_TO_BINARY_PATTERN, BYTE_TO_BINARY(gyro_range));
       if (!this->write_byte(BMI160_REGISTER_GYRO_RANGE, gyro_range)) {
@@ -164,7 +164,7 @@ void BMI160Component::internal_setup_(int stage) {
         return;
       }
 
-      ESP_LOGV(TAG, "  Setting up Accel Config...");
+      ESP_LOGV(TAG, "  Setting up Accel Config");
       uint8_t accel_config =
           (uint8_t) AcclFilterMode::PERF | (uint8_t) AcclBandwidth::RES_AVG16 | (uint8_t) AccelOutputDataRate::HZ_25;
       ESP_LOGV(TAG, "  Output accel_config: 0b" BYTE_TO_BINARY_PATTERN, BYTE_TO_BINARY(accel_config));
@@ -172,7 +172,7 @@ void BMI160Component::internal_setup_(int stage) {
         this->mark_failed();
         return;
       }
-      ESP_LOGV(TAG, "  Setting up Accel Range...");
+      ESP_LOGV(TAG, "  Setting up Accel Range");
       uint8_t accel_range = (uint8_t) AccelRange::RANGE_16G;
       ESP_LOGV(TAG, "  Output accel_range: 0b" BYTE_TO_BINARY_PATTERN, BYTE_TO_BINARY(accel_range));
       if (!this->write_byte(BMI160_REGISTER_ACCEL_RANGE, accel_range)) {
@@ -189,7 +189,7 @@ void BMI160Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BMI160:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with BMI160 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Acceleration X", this->accel_x_sensor_);
@@ -219,7 +219,7 @@ void BMI160Component::update() {
     return;
   }
 
-  ESP_LOGV(TAG, "    Updating BMI160...");
+  ESP_LOGV(TAG, "    Updating BMI160");
   int16_t data[6];
   if (this->read_le_int16_(BMI160_REGISTER_DATA_GYRO_X_LSB, data, 6) != i2c::ERROR_OK) {
     this->status_set_warning();

esphome/components/bmp085/bmp085.cpp

@@ -20,7 +20,7 @@ void BMP085Component::update() {
   this->set_timeout("temperature", 5, [this]() { this->read_temperature_(); });
 }
 void BMP085Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BMP085...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t data[22];
   if (!this->read_bytes(BMP085_REGISTER_AC1_H, data, 22)) {
     this->mark_failed();
@@ -129,7 +129,7 @@ void BMP085Component::read_pressure_() {
   this->status_clear_warning();
 }
 bool BMP085Component::set_mode_(uint8_t mode) {
-  ESP_LOGV(TAG, "Setting mode to 0x%02X...", mode);
+  ESP_LOGV(TAG, "Setting mode to 0x%02X", mode);
   return this->write_byte(BMP085_REGISTER_CONTROL, mode);
 }
 float BMP085Component::get_setup_priority() const { return setup_priority::DATA; }

esphome/components/bmp280_base/bmp280_base.cpp

@@ -57,7 +57,7 @@ static const char *iir_filter_to_str(BMP280IIRFilter filter) {
 }
 
 void BMP280Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up BMP280...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t chip_id = 0;
 
   // Read the chip id twice, to work around a bug where the first read is 0.
@@ -132,7 +132,7 @@ void BMP280Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BMP280:");
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BMP280 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
       ESP_LOGE(TAG, "BMP280 has wrong chip ID! Is it a BME280?");
@@ -155,7 +155,7 @@ inline uint8_t oversampling_to_time(BMP280Oversampling over_sampling) { return (
 
 void BMP280Component::update() {
   // Enable sensor
-  ESP_LOGV(TAG, "Sending conversion request...");
+  ESP_LOGV(TAG, "Sending conversion request");
   uint8_t meas_value = 0;
   meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
   meas_value |= (this->pressure_oversampling_ & 0b111) << 2;

esphome/components/bmp3xx_base/bmp3xx_base.cpp

@@ -70,10 +70,10 @@ static const LogString *iir_filter_to_str(IIRFilter filter) {
 
 void BMP3XXComponent::setup() {
   this->error_code_ = NONE;
-  ESP_LOGCONFIG(TAG, "Setting up BMP3XX...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // Call the Device base class "initialise" function
   if (!reset()) {
-    ESP_LOGE(TAG, "Failed to reset BMP3XX...");
+    ESP_LOGE(TAG, "Failed to reset");
     this->error_code_ = ERROR_SENSOR_RESET;
     this->mark_failed();
   }
@@ -148,25 +148,25 @@ void BMP3XXComponent::setup() {
 }
 
 void BMP3XXComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "BMP3XX:");
-  ESP_LOGCONFIG(TAG, "  Type: %s (0x%X)", LOG_STR_ARG(chip_type_to_str(this->chip_id_.reg)), this->chip_id_.reg);
+  ESP_LOGCONFIG(TAG,
+                "BMP3XX:\n"
+                "  Type: %s (0x%X)",
+                LOG_STR_ARG(chip_type_to_str(this->chip_id_.reg)), this->chip_id_.reg);
   switch (this->error_code_) {
     case NONE:
       break;
     case ERROR_COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BMP3XX failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case ERROR_WRONG_CHIP_ID:
-      ESP_LOGE(
-          TAG,
-          "BMP3XX has wrong chip ID (reported id: 0x%X) - please check if you are really using a BMP 388 or BMP 390",
-          this->chip_id_.reg);
+      ESP_LOGE(TAG, "Wrong chip ID (reported id: 0x%X) - please check if you are really using a BMP 388 or BMP 390",
+               this->chip_id_.reg);
       break;
     case ERROR_SENSOR_RESET:
-      ESP_LOGE(TAG, "BMP3XX failed to reset");
+      ESP_LOGE(TAG, "Failed to reset");
       break;
     default:
-      ESP_LOGE(TAG, "BMP3XX error code %d", (int) this->error_code_);
+      ESP_LOGE(TAG, "Error code %d", (int) this->error_code_);
       break;
   }
   ESP_LOGCONFIG(TAG, "  IIR Filter: %s", LOG_STR_ARG(iir_filter_to_str(this->iir_filter_)));
@@ -186,7 +186,7 @@ inline uint8_t oversampling_to_time(Oversampling over_sampling) { return (1 << u
 
 void BMP3XXComponent::update() {
   // Enable sensor
-  ESP_LOGV(TAG, "Sending conversion request...");
+  ESP_LOGV(TAG, "Sending conversion request");
   float meas_time = 1.0f;
   // Ref: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf 3.9.2
   meas_time += 2.02f * oversampling_to_time(this->temperature_oversampling_) + 0.163f;
@@ -296,7 +296,7 @@ bool BMP3XXComponent::get_pressure(float &pressure) {
 bool BMP3XXComponent::get_measurements(float &temperature, float &pressure) {
   // Check if a measurement is ready
   if (!data_ready()) {
-    ESP_LOGD(TAG, "BMP3XX Get measurement - data not ready skipping update");
+    ESP_LOGD(TAG, "Get measurement - data not ready skipping update");
     return false;
   }