esphome 2025.3.2__py3-none-any.whl → 2025.4.0b1__py3-none-any.whl

esphome/components/hlw8012/sensor.py

@@ -1,17 +1,17 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHANGE_MODE_EVERY,
-    CONF_INITIAL_MODE,
     CONF_CURRENT,
     CONF_CURRENT_RESISTOR,
+    CONF_ENERGY,
     CONF_ID,
+    CONF_INITIAL_MODE,
+    CONF_MODEL,
     CONF_POWER,
-    CONF_ENERGY,
     CONF_SEL_PIN,
-    CONF_MODEL,
     CONF_VOLTAGE,
     CONF_VOLTAGE_DIVIDER,
     DEVICE_CLASS_CURRENT,
@@ -20,8 +20,8 @@ from esphome.const import (
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )

esphome/components/hm3301/sensor.py

@@ -1,18 +1,18 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
+    CONF_PM_1_0,
     CONF_PM_2_5,
     CONF_PM_10_0,
-    CONF_PM_1_0,
     DEVICE_CLASS_AQI,
     DEVICE_CLASS_PM1,
     DEVICE_CLASS_PM10,
     DEVICE_CLASS_PM25,
+    ICON_CHEMICAL_WEAPON,
     STATE_CLASS_MEASUREMENT,
     UNIT_MICROGRAMS_PER_CUBIC_METER,
-    ICON_CHEMICAL_WEAPON,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/hmc5883l/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ADDRESS,
     CONF_FIELD_STRENGTH_X,
@@ -10,12 +10,12 @@ from esphome.const import (
     CONF_ID,
     CONF_OVERSAMPLING,
     CONF_RANGE,
+    CONF_UPDATE_INTERVAL,
     ICON_MAGNET,
+    ICON_SCREEN_ROTATION,
     STATE_CLASS_MEASUREMENT,
-    UNIT_MICROTESLA,
     UNIT_DEGREES,
-    ICON_SCREEN_ROTATION,
-    CONF_UPDATE_INTERVAL,
+    UNIT_MICROTESLA,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/homeassistant/time/__init__.py

@@ -1,7 +1,8 @@
+import esphome.codegen as cg
 from esphome.components import time as time_
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import CONF_ID
+
 from .. import homeassistant_ns
 
 DEPENDENCIES = ["api"]

esphome/components/honeywell_hih_i2c/sensor.py

@@ -1,15 +1,15 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,
     CONF_TEMPERATURE,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_HUMIDITY,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/honeywellabp/sensor.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import sensor, spi
 import esphome.config_validation as cv
-from esphome.components import sensor
-from esphome.components import spi
 from esphome.const import (
     CONF_ID,
     CONF_PRESSURE,

esphome/components/honeywellabp2_i2c/sensor.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor
-from esphome.components import i2c
 from esphome.const import (
     CONF_ID,
     CONF_PRESSURE,

esphome/components/host/time/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-from esphome.const import CONF_ID
-import esphome.config_validation as cv
 from esphome.components import time as time_
+import esphome.config_validation as cv
+from esphome.const import CONF_ID
 
 CODEOWNERS = ["@clydebarrow"]
 

esphome/components/hrxl_maxsonar_wr/sensor.py

@@ -1,9 +1,9 @@
 import esphome.codegen as cg
 from esphome.components import sensor, uart
 from esphome.const import (
+    ICON_ARROW_EXPAND_VERTICAL,
     STATE_CLASS_MEASUREMENT,
     UNIT_METER,
-    ICON_ARROW_EXPAND_VERTICAL,
 )
 
 CODEOWNERS = ["@netmikey"]

esphome/components/hte501/sensor.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_TEMPERATURE,
-    DEVICE_CLASS_TEMPERATURE,
     DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,

esphome/components/http_request/ota/__init__.py

@@ -1,15 +1,11 @@
+from esphome import automation
 import esphome.codegen as cg
+from esphome.components.ota import BASE_OTA_SCHEMA, OTAComponent, ota_to_code
 import esphome.config_validation as cv
-from esphome import automation
-from esphome.const import (
-    CONF_ID,
-    CONF_PASSWORD,
-    CONF_URL,
-    CONF_USERNAME,
-)
-from esphome.components.ota import BASE_OTA_SCHEMA, ota_to_code, OTAComponent
+from esphome.const import CONF_ID, CONF_PASSWORD, CONF_URL, CONF_USERNAME
 from esphome.core import coroutine_with_priority
-from .. import CONF_HTTP_REQUEST_ID, http_request_ns, HttpRequestComponent
+
+from .. import CONF_HTTP_REQUEST_ID, HttpRequestComponent, http_request_ns
 
 CODEOWNERS = ["@oarcher"]
 

esphome/components/http_request/update/__init__.py

@@ -1,15 +1,11 @@
-import esphome.config_validation as cv
 import esphome.codegen as cg
-
 from esphome.components import update
-from esphome.const import (
-    CONF_SOURCE,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_SOURCE
 
-from .. import http_request_ns, CONF_HTTP_REQUEST_ID, HttpRequestComponent
+from .. import CONF_HTTP_REQUEST_ID, HttpRequestComponent, http_request_ns
 from ..ota import OtaHttpRequestComponent
 
-
 AUTO_LOAD = ["json"]
 CODEOWNERS = ["@jesserockz"]
 DEPENDENCIES = ["ota.http_request"]

esphome/components/htu21d/sensor.py

@@ -1,21 +1,21 @@
+from esphome import automation
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
-from esphome import automation
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_HEATER,
     CONF_HUMIDITY,
     CONF_ID,
+    CONF_LEVEL,
     CONF_MODEL,
+    CONF_STATUS,
     CONF_TEMPERATURE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
-    UNIT_PERCENT,
-    CONF_HEATER,
     UNIT_EMPTY,
-    CONF_LEVEL,
-    CONF_STATUS,
+    UNIT_PERCENT,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/htu31d/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/hx711/sensor.py

@@ -1,13 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import sensor
-from esphome.const import (
-    CONF_CLK_PIN,
-    CONF_GAIN,
-    ICON_SCALE,
-    STATE_CLASS_MEASUREMENT,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_CLK_PIN, CONF_GAIN, ICON_SCALE, STATE_CLASS_MEASUREMENT
 
 hx711_ns = cg.esphome_ns.namespace("hx711")
 HX711Sensor = hx711_ns.class_("HX711Sensor", sensor.Sensor, cg.PollingComponent)

esphome/components/hydreon_rgxx/binary_sensor.py

@@ -1,13 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import (
-    CONF_ID,
-    DEVICE_CLASS_COLD,
-    DEVICE_CLASS_PROBLEM,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, DEVICE_CLASS_COLD, DEVICE_CLASS_PROBLEM
 
-from . import hydreon_rgxx_ns, HydreonRGxxComponent
+from . import HydreonRGxxComponent, hydreon_rgxx_ns
 
 CONF_HYDREON_RGXX_ID = "hydreon_rgxx_id"
 CONF_TOO_COLD = "too_cold"

esphome/components/hydreon_rgxx/sensor.py

@@ -1,22 +1,22 @@
 import esphome.codegen as cg
+from esphome.components import sensor, uart
 import esphome.config_validation as cv
-from esphome.components import uart, sensor
 from esphome.const import (
     CONF_ID,
     CONF_MODEL,
     CONF_MOISTURE,
     CONF_RESOLUTION,
     CONF_TEMPERATURE,
-    DEVICE_CLASS_PRECIPITATION_INTENSITY,
     DEVICE_CLASS_PRECIPITATION,
+    DEVICE_CLASS_PRECIPITATION_INTENSITY,
+    ICON_THERMOMETER,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
     UNIT_CELSIUS,
     UNIT_MILLIMETER,
-    ICON_THERMOMETER,
 )
 
-from . import RGModel, RG15Resolution, HydreonRGxxComponent
+from . import HydreonRGxxComponent, RG15Resolution, RGModel
 
 UNIT_INTENSITY = "intensity"
 UNIT_MILLIMETERS_PER_HOUR = "mm/h"

esphome/components/hyt271/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/i2c_device/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]

esphome/components/i2s_audio/media_player/__init__.py

@@ -1,21 +1,19 @@
+from esphome import pins
 import esphome.codegen as cg
-from esphome.components import media_player, esp32
+from esphome.components import esp32, media_player
 import esphome.config_validation as cv
-
-from esphome import pins
-
 from esphome.const import CONF_ID, CONF_MODE
 
 from .. import (
-    i2s_audio_ns,
-    I2SAudioComponent,
-    I2SAudioOut,
     CONF_I2S_AUDIO_ID,
     CONF_I2S_DOUT_PIN,
     CONF_LEFT,
-    CONF_RIGHT,
     CONF_MONO,
+    CONF_RIGHT,
     CONF_STEREO,
+    I2SAudioComponent,
+    I2SAudioOut,
+    i2s_audio_ns,
 )
 
 CODEOWNERS = ["@jesserockz"]

esphome/components/iaqcore/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CO2,
     CONF_ID,
@@ -8,8 +8,8 @@ from esphome.const import (
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PARTS_PER_MILLION,
     UNIT_PARTS_PER_BILLION,
+    UNIT_PARTS_PER_MILLION,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/ina219/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUS_VOLTAGE,
     CONF_CURRENT,
@@ -14,8 +14,8 @@ from esphome.const import (
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
 )
 

esphome/components/ina226/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUS_VOLTAGE,
     CONF_CURRENT,
@@ -9,14 +9,14 @@ from esphome.const import (
     CONF_POWER,
     CONF_SHUNT_RESISTANCE,
     CONF_SHUNT_VOLTAGE,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_POWER,
+    DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
-    CONF_VOLTAGE,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/ina260/sensor.py

@@ -1,17 +1,17 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_BUS_VOLTAGE,
     CONF_CURRENT,
+    CONF_ID,
     CONF_POWER,
-    DEVICE_CLASS_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_POWER,
+    DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
 )
 

esphome/components/ina2xx_base/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUS_VOLTAGE,
     CONF_CURRENT,
@@ -21,8 +21,8 @@ from esphome.const import (
     UNIT_AMPERE,
     UNIT_CELSIUS,
     UNIT_VOLT,
-    UNIT_WATT_HOURS,
     UNIT_WATT,
+    UNIT_WATT_HOURS,
 )
 
 CODEOWNERS = ["@latonita"]

esphome/components/ina2xx_i2c/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, ina2xx_base
 import esphome.config_validation as cv
-from esphome.components import ina2xx_base, i2c
 from esphome.const import CONF_ID, CONF_MODEL
 
 AUTO_LOAD = ["ina2xx_base"]

esphome/components/ina2xx_spi/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import ina2xx_base, spi
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_MODEL
 
 AUTO_LOAD = ["ina2xx_base"]

esphome/components/ina3221/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUS_VOLTAGE,
     CONF_CURRENT,
@@ -8,12 +8,12 @@ from esphome.const import (
     CONF_POWER,
     CONF_SHUNT_RESISTANCE,
     CONF_SHUNT_VOLTAGE,
-    DEVICE_CLASS_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_POWER,
+    DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
 )
 

esphome/components/inkbird_ibsth1_mini/sensor.py

@@ -1,10 +1,11 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_LEVEL,
     CONF_EXTERNAL_TEMPERATURE,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_MAC_ADDRESS,
     CONF_TEMPERATURE,
     DEVICE_CLASS_BATTERY,
@@ -14,7 +15,6 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    CONF_ID,
 )
 
 CODEOWNERS = ["@fkirill"]

esphome/components/inkplate6/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display, i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_FULL_UPDATE_EVERY,
     CONF_ID,

esphome/components/integration/sensor.py

@@ -1,14 +1,14 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ACCURACY_DECIMALS,
     CONF_ICON,
     CONF_ID,
-    CONF_SENSOR,
     CONF_RESTORE,
+    CONF_SENSOR,
     CONF_UNIT_OF_MEASUREMENT,
-    CONF_ACCURACY_DECIMALS,
 )
 from esphome.core.entity_helpers import inherit_property_from
 

esphome/components/internal_temperature/sensor.py

@@ -1,20 +1,18 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
 from esphome.components.esp32 import get_esp32_variant
-from esphome.components.esp32.const import (
-    VARIANT_ESP32S3,
-)
+from esphome.components.esp32.const import VARIANT_ESP32S3
+import esphome.config_validation as cv
 from esphome.const import (
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
     DEVICE_CLASS_TEMPERATURE,
     ENTITY_CATEGORY_DIAGNOSTIC,
     KEY_CORE,
     KEY_FRAMEWORK_VERSION,
+    PLATFORM_BK72XX,
     PLATFORM_ESP32,
     PLATFORM_RP2040,
-    PLATFORM_BK72XX,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
 )
 from esphome.core import CORE
 

esphome/components/interval/__init__.py

@@ -1,6 +1,6 @@
+from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import automation
 from esphome.const import CONF_ID, CONF_INTERVAL, CONF_STARTUP_DELAY
 
 CODEOWNERS = ["@esphome/core"]

esphome/components/jsn_sr04t/sensor.py

@@ -1,11 +1,11 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_MODEL,
+    ICON_ARROW_EXPAND_VERTICAL,
     STATE_CLASS_MEASUREMENT,
     UNIT_METER,
-    ICON_ARROW_EXPAND_VERTICAL,
-    CONF_MODEL,
 )
 
 CODEOWNERS = ["@Mafus1"]

esphome/components/kamstrup_kmp/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_COMMAND,
     CONF_CUSTOM,

esphome/components/key_collector/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import key_provider
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_MAX_LENGTH,

esphome/components/kmeteriso/sensor.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INTERNAL_TEMPERATURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_TEMPERATURE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
-    ENTITY_CATEGORY_DIAGNOSTIC,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/kuntze/sensor.py

@@ -1,19 +1,19 @@
 import esphome.codegen as cg
+from esphome.components import modbus, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, modbus
 from esphome.const import (
-    CONF_ID,
     CONF_EC,
+    CONF_ID,
     CONF_PH,
     CONF_TEMPERATURE,
+    DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_TEMPERATURE,
     ICON_EMPTY,
     ICON_THERMOMETER,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_EMPTY,
     UNIT_PH,
-    STATE_CLASS_MEASUREMENT,
-    DEVICE_CLASS_EMPTY,
-    DEVICE_CLASS_TEMPERATURE,
 )
 
 CODEOWNERS = ["@ssieb"]