esphome 2025.3.2__py3-none-any.whl → 2025.4.0b1__py3-none-any.whl

esphome/components/mmc5603/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ADDRESS,
     CONF_FIELD_STRENGTH_X,
@@ -8,12 +8,12 @@ from esphome.const import (
     CONF_FIELD_STRENGTH_Z,
     CONF_HEADING,
     CONF_ID,
+    CONF_UPDATE_INTERVAL,
     ICON_MAGNET,
+    ICON_SCREEN_ROTATION,
     STATE_CLASS_MEASUREMENT,
-    UNIT_MICROTESLA,
     UNIT_DEGREES,
-    ICON_SCREEN_ROTATION,
-    CONF_UPDATE_INTERVAL,
+    UNIT_MICROTESLA,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/mmc5983/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_FIELD_STRENGTH_X,
     CONF_FIELD_STRENGTH_Y,

esphome/components/modbus/__init__.py

@@ -1,18 +1,14 @@
 from __future__ import annotations
+
 from typing import Literal
 
+from esphome import pins
 import esphome.codegen as cg
+from esphome.components import uart
 import esphome.config_validation as cv
-import esphome.final_validate as fv
+from esphome.const import CONF_ADDRESS, CONF_DISABLE_CRC, CONF_FLOW_CONTROL_PIN, CONF_ID
 from esphome.cpp_helpers import gpio_pin_expression
-from esphome.components import uart
-from esphome.const import (
-    CONF_FLOW_CONTROL_PIN,
-    CONF_ID,
-    CONF_ADDRESS,
-    CONF_DISABLE_CRC,
-)
-from esphome import pins
+import esphome.final_validate as fv
 
 DEPENDENCIES = ["uart"]
 

esphome/components/modbus_controller/__init__.py

@@ -25,8 +25,8 @@ from .const import (
     CONF_MODBUS_CONTROLLER_ID,
     CONF_OFFLINE_SKIP_UPDATES,
     CONF_ON_COMMAND_SENT,
-    CONF_ON_ONLINE,
     CONF_ON_OFFLINE,
+    CONF_ON_ONLINE,
     CONF_REGISTER_COUNT,
     CONF_REGISTER_TYPE,
     CONF_RESPONSE_SIZE,

esphome/components/monochromatic/light.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
-from esphome.const import CONF_OUTPUT_ID, CONF_OUTPUT
+import esphome.config_validation as cv
+from esphome.const import CONF_OUTPUT, CONF_OUTPUT_ID
 
 monochromatic_ns = cg.esphome_ns.namespace("monochromatic")
 MonochromaticLightOutput = monochromatic_ns.class_(

esphome/components/mopeka_ble/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@spbrogan", "@Fabian-Schmidt"]

esphome/components/mopeka_pro_check/sensor.py

@@ -1,25 +1,25 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
+    CONF_BATTERY_LEVEL,
     CONF_DISTANCE,
-    CONF_MAC_ADDRESS,
     CONF_ID,
-    ICON_COUNTER,
-    ICON_THERMOMETER,
-    ICON_RULER,
-    ICON_SIGNAL,
-    UNIT_PERCENT,
-    UNIT_EMPTY,
     CONF_LEVEL,
+    CONF_MAC_ADDRESS,
     CONF_TEMPERATURE,
+    DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_TEMPERATURE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_COUNTER,
+    ICON_RULER,
+    ICON_SIGNAL,
+    ICON_THERMOMETER,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
+    UNIT_EMPTY,
     UNIT_MILLIMETER,
-    STATE_CLASS_MEASUREMENT,
-    CONF_BATTERY_LEVEL,
-    DEVICE_CLASS_BATTERY,
-    ENTITY_CATEGORY_DIAGNOSTIC,
+    UNIT_PERCENT,
 )
 
 CONF_TANK_TYPE = "tank_type"

esphome/components/mopeka_std_check/sensor.py

@@ -1,21 +1,21 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
+    CONF_BATTERY_LEVEL,
     CONF_DISTANCE,
-    CONF_MAC_ADDRESS,
     CONF_ID,
-    ICON_THERMOMETER,
-    ICON_RULER,
-    UNIT_PERCENT,
     CONF_LEVEL,
+    CONF_MAC_ADDRESS,
     CONF_TEMPERATURE,
+    DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_TEMPERATURE,
+    ICON_RULER,
+    ICON_THERMOMETER,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_MILLIMETER,
-    STATE_CLASS_MEASUREMENT,
-    CONF_BATTERY_LEVEL,
-    DEVICE_CLASS_BATTERY,
+    UNIT_PERCENT,
 )
 
 CONF_TANK_TYPE = "tank_type"

esphome/components/mpl3115a2/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ALTITUDE,
     CONF_ID,

esphome/components/mpr121/__init__.py

@@ -1,8 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-import esphome.final_validate as fv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BINARY_SENSOR,
     CONF_CHANNEL,
@@ -13,6 +12,7 @@ from esphome.const import (
     CONF_NUMBER,
     CONF_OUTPUT,
 )
+import esphome.final_validate as fv
 
 CONF_TOUCH_THRESHOLD = "touch_threshold"
 CONF_RELEASE_THRESHOLD = "release_threshold"

esphome/components/mpr121/binary_sensor/__init__.py

@@ -1,13 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL
+
 from .. import (
-    mpr121_ns,
-    MPR121Component,
     CONF_MPR121_ID,
-    CONF_TOUCH_THRESHOLD,
     CONF_RELEASE_THRESHOLD,
+    CONF_TOUCH_THRESHOLD,
+    MPR121Component,
+    mpr121_ns,
 )
 
 DEPENDENCIES = ["mpr121"]

esphome/components/mpu6050/sensor.py

@@ -1,16 +1,16 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_TEMPERATURE,
     DEVICE_CLASS_TEMPERATURE,
     ICON_BRIEFCASE_DOWNLOAD,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_METER_PER_SECOND_SQUARED,
     ICON_SCREEN_ROTATION,
-    UNIT_DEGREE_PER_SECOND,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
+    UNIT_DEGREE_PER_SECOND,
+    UNIT_METER_PER_SECOND_SQUARED,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/mpu6886/sensor.py

@@ -1,16 +1,16 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_TEMPERATURE,
     DEVICE_CLASS_TEMPERATURE,
     ICON_BRIEFCASE_DOWNLOAD,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_METER_PER_SECOND_SQUARED,
     ICON_SCREEN_ROTATION,
-    UNIT_DEGREE_PER_SECOND,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
+    UNIT_DEGREE_PER_SECOND,
+    UNIT_METER_PER_SECOND_SQUARED,
 )
 
 CODEOWNERS = ["@fabaff"]

esphome/components/mqtt_subscribe/sensor/__init__.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import mqtt, sensor
-from esphome.const import (
-    CONF_QOS,
-    CONF_TOPIC,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_QOS, CONF_TOPIC
+
 from .. import mqtt_subscribe_ns
 
 DEPENDENCIES = ["mqtt"]

esphome/components/mqtt_subscribe/text_sensor/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import mqtt, text_sensor
 import esphome.config_validation as cv
-from esphome.components import text_sensor, mqtt
 from esphome.const import CONF_QOS, CONF_TOPIC
 
 from .. import mqtt_subscribe_ns

esphome/components/ms5611/sensor.py

@@ -1,15 +1,15 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_PRESSURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_PRESSURE,
     DEVICE_CLASS_TEMPERATURE,
+    ICON_GAUGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
-    ICON_GAUGE,
     UNIT_HECTOPASCAL,
 )
 

esphome/components/ms8607/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/my9231/__init__.py

@@ -1,6 +1,6 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
 from esphome.const import (
     CONF_BIT_DEPTH,
     CONF_CLOCK_PIN,

esphome/components/my9231/output.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL, CONF_ID
+
 from . import MY9231OutputComponent
 
 DEPENDENCIES = ["my9231"]

esphome/components/nau7802/nau7802.cpp

@@ -120,8 +120,6 @@ void NAU7802Sensor::complete_setup_() {
   // PGA stabilizer cap on output
   i2c::I2CRegister pwr_reg = this->reg(POWER_REG);
   pwr_reg |= POWER_PGA_CAP_EN;
-
-  this->setup_complete_ = true;
 }
 
 void NAU7802Sensor::dump_config() {
@@ -317,7 +315,5 @@ void NAU7802Sensor::update() {
 
 bool NAU7802Sensor::is_data_ready_() { return this->reg(PU_CTRL_REG).get() & PU_CTRL_CYCLE_READY; }
 
-bool NAU7802Sensor::can_proceed() { return this->setup_complete_; }
-
 }  // namespace nau7802
 }  // namespace esphome

esphome/components/nau7802/nau7802.h

@@ -61,7 +61,6 @@ class NAU7802Sensor : public sensor::Sensor, public PollingComponent, public i2c
 
   void setup() override;
   void loop() override;
-  bool can_proceed() override;
   void dump_config() override;
   float get_setup_priority() const override;
   void update() override;
@@ -80,7 +79,6 @@ class NAU7802Sensor : public sensor::Sensor, public PollingComponent, public i2c
   int32_t offset_calibration_;
   bool offset_calibration_failed_ = false;
   bool gain_calibration_failed_ = false;
-  bool setup_complete_ = false;
 
   //
   // Config values

esphome/components/neopixelbus/_methods.py

@@ -1,6 +1,14 @@
 from dataclasses import dataclass
 from typing import Any
+
 import esphome.codegen as cg
+from esphome.components.esp32 import get_esp32_variant
+from esphome.components.esp32.const import (
+    VARIANT_ESP32,
+    VARIANT_ESP32C3,
+    VARIANT_ESP32S2,
+    VARIANT_ESP32S3,
+)
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHANNEL,
@@ -10,17 +18,9 @@ from esphome.const import (
     CONF_PIN,
     CONF_SPEED,
 )
-from esphome.components.esp32 import get_esp32_variant
-from esphome.components.esp32.const import (
-    VARIANT_ESP32,
-    VARIANT_ESP32C3,
-    VARIANT_ESP32S2,
-    VARIANT_ESP32S3,
-)
 from esphome.core import CORE
+
 from .const import (
-    CONF_ASYNC,
-    CONF_BUS,
     CHIP_400KBPS,
     CHIP_800KBPS,
     CHIP_APA106,
@@ -38,6 +38,8 @@ from .const import (
     CHIP_WS2812,
     CHIP_WS2812X,
     CHIP_WS2813,
+    CONF_ASYNC,
+    CONF_BUS,
     ONE_WIRE_CHIPS,
     TWO_WIRE_CHIPS,
 )

esphome/components/neopixelbus/light.py

@@ -1,40 +1,33 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import light
+from esphome.components.esp32 import get_esp32_variant
+from esphome.components.esp32.const import VARIANT_ESP32C3, VARIANT_ESP32S3
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHANNEL,
     CONF_CLOCK_PIN,
     CONF_DATA_PIN,
+    CONF_INVERT,
     CONF_METHOD,
     CONF_NUM_LEDS,
+    CONF_OUTPUT_ID,
     CONF_PIN,
     CONF_TYPE,
     CONF_VARIANT,
-    CONF_OUTPUT_ID,
-    CONF_INVERT,
-)
-from esphome.components.esp32 import get_esp32_variant
-from esphome.components.esp32.const import (
-    VARIANT_ESP32C3,
-    VARIANT_ESP32S3,
 )
 from esphome.core import CORE
+
 from ._methods import (
-    METHODS,
-    METHOD_SPI,
-    METHOD_ESP8266_UART,
     METHOD_BIT_BANG,
     METHOD_ESP32_I2S,
     METHOD_ESP32_RMT,
     METHOD_ESP8266_DMA,
+    METHOD_ESP8266_UART,
+    METHOD_SPI,
+    METHODS,
 )
-from .const import (
-    CHIP_TYPES,
-    CONF_ASYNC,
-    CONF_BUS,
-    ONE_WIRE_CHIPS,
-)
+from .const import CHIP_TYPES, CONF_ASYNC, CONF_BUS, ONE_WIRE_CHIPS
 
 neopixelbus_ns = cg.esphome_ns.namespace("neopixelbus")
 NeoPixelBusLightOutputBase = neopixelbus_ns.class_(

esphome/components/nextion/binary_sensor/__init__.py

@@ -1,23 +1,15 @@
 from esphome import automation
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
+from esphome.const import CONF_COMPONENT_ID, CONF_ID, CONF_PAGE_ID, CONF_STATE
 
-from esphome.const import (
-    CONF_ID,
-    CONF_STATE,
-    CONF_COMPONENT_ID,
-    CONF_PAGE_ID,
-)
-
-from .. import nextion_ns, CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION
-
-
+from .. import CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION, nextion_ns
 from ..base_component import (
-    setup_component_core_,
-    CONFIG_BINARY_SENSOR_SCHEMA,
-    CONF_VARIABLE_NAME,
     CONF_COMPONENT_NAME,
+    CONF_VARIABLE_NAME,
+    CONFIG_BINARY_SENSOR_SCHEMA,
+    setup_component_core_,
 )
 
 CODEOWNERS = ["@senexcrenshaw"]

esphome/components/nextion/sensor/__init__.py

@@ -1,25 +1,22 @@
 from esphome import automation
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
+from esphome.const import CONF_COMPONENT_ID, CONF_ID, CONF_STATE
 
-from esphome.const import CONF_ID, CONF_COMPONENT_ID, CONF_STATE
-
-from .. import nextion_ns, CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION
-
+from .. import CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION, nextion_ns
 from ..base_component import (
-    setup_component_core_,
-    CONFIG_SENSOR_COMPONENT_SCHEMA,
-    CONF_VARIABLE_NAME,
     CONF_COMPONENT_NAME,
     CONF_PRECISION,
+    CONF_VARIABLE_NAME,
     CONF_WAVE_CHANNEL_ID,
+    CONF_WAVE_MAX_LENGTH,
     CONF_WAVE_MAX_VALUE,
     CONF_WAVEFORM_SEND_LAST_VALUE,
-    CONF_WAVE_MAX_LENGTH,
+    CONFIG_SENSOR_COMPONENT_SCHEMA,
+    setup_component_core_,
 )
 
-
 CODEOWNERS = ["@senexcrenshaw"]
 
 NextionSensor = nextion_ns.class_("NextionSensor", sensor.Sensor, cg.PollingComponent)

esphome/components/nextion/switch/__init__.py

@@ -1,17 +1,15 @@
 from esphome import automation
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
-
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_STATE
 
-from .. import nextion_ns, CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION
-
+from .. import CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION, nextion_ns
 from ..base_component import (
-    setup_component_core_,
     CONF_COMPONENT_NAME,
     CONF_VARIABLE_NAME,
     CONFIG_SWITCH_COMPONENT_SCHEMA,
+    setup_component_core_,
 )
 
 CODEOWNERS = ["@senexcrenshaw"]

esphome/components/nextion/text_sensor/__init__.py

@@ -1,15 +1,11 @@
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import text_sensor
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import CONF_ID, CONF_STATE
 
-from .. import nextion_ns, CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION
-
-from ..base_component import (
-    setup_component_core_,
-    CONFIG_TEXT_COMPONENT_SCHEMA,
-)
+from .. import CONF_NEXTION_ID, CONF_PUBLISH_STATE, CONF_SEND_TO_NEXTION, nextion_ns
+from ..base_component import CONFIG_TEXT_COMPONENT_SCHEMA, setup_component_core_
 
 CODEOWNERS = ["@senexcrenshaw"]
 

esphome/components/noblex/climate.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import climate_ir
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]

esphome/components/ntc/sensor.py

@@ -1,8 +1,8 @@
 from math import log
 
-import esphome.config_validation as cv
 import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CALIBRATION,
     CONF_REFERENCE_RESISTANCE,

esphome/components/opentherm/__init__.py

@@ -1,13 +1,13 @@
+import logging
 from typing import Any
 
-import logging
-from esphome import automation
+from esphome import automation, pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
 from esphome.components import sensor
-from esphome.const import CONF_ID, PLATFORM_ESP32, PLATFORM_ESP8266, CONF_TRIGGER_ID
-from . import const, schema, validate, generate
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_TRIGGER_ID, PLATFORM_ESP32, PLATFORM_ESP8266
+
+from . import const, generate, schema, validate
 
 CODEOWNERS = ["@olegtarasov"]
 MULTI_CONF = True

esphome/components/opentherm/input.py

@@ -2,7 +2,8 @@ from typing import Any
 
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from . import schema, generate
+
+from . import generate, schema
 
 CONF_min_value = "min_value"
 CONF_max_value = "max_value"

esphome/components/opentherm/number/__init__.py

@@ -1,16 +1,17 @@
 from typing import Any
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import number
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
-    CONF_UNIT_OF_MEASUREMENT,
-    CONF_STEP,
     CONF_INITIAL_VALUE,
     CONF_RESTORE_VALUE,
+    CONF_STEP,
+    CONF_UNIT_OF_MEASUREMENT,
 )
-from .. import const, schema, validate, input, generate
+
+from .. import const, generate, input, schema, validate
 
 DEPENDENCIES = [const.OPENTHERM]
 COMPONENT_TYPE = const.NUMBER

esphome/components/opentherm/output/__init__.py

@@ -1,10 +1,11 @@
 from typing import Any
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
-from .. import const, schema, validate, input, generate
+
+from .. import const, generate, input, schema, validate
 
 DEPENDENCIES = [const.OPENTHERM]
 COMPONENT_TYPE = const.OUTPUT

esphome/components/opentherm/schema.py

@@ -2,16 +2,10 @@
 # inputs of the OpenTherm component.
 
 from dataclasses import dataclass
-from typing import Optional, TypeVar, Any
+from typing import Any, Optional, TypeVar
 
 import esphome.config_validation as cv
 from esphome.const import (
-    UNIT_CELSIUS,
-    UNIT_EMPTY,
-    UNIT_KILOWATT,
-    UNIT_MICROAMP,
-    UNIT_PERCENT,
-    UNIT_REVOLUTIONS_PER_MINUTE,
     DEVICE_CLASS_COLD,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_EMPTY,
@@ -22,6 +16,12 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_NONE,
     STATE_CLASS_TOTAL_INCREASING,
+    UNIT_CELSIUS,
+    UNIT_EMPTY,
+    UNIT_KILOWATT,
+    UNIT_MICROAMP,
+    UNIT_PERCENT,
+    UNIT_REVOLUTIONS_PER_MINUTE,
 )