esphome 2025.3.2__py3-none-any.whl → 2025.4.0b1__py3-none-any.whl

esphome/components/psram/__init__.py

@@ -1,21 +1,43 @@
+import logging
+
 import esphome.codegen as cg
+from esphome.components.esp32 import (
+    CONF_ENABLE_IDF_EXPERIMENTAL_FEATURES,
+    VARIANT_ESP32,
+    add_idf_sdkconfig_option,
+    get_esp32_variant,
+    only_on_variant,
+)
+from esphome.components.esp32.const import VARIANT_ESP32S2, VARIANT_ESP32S3
 import esphome.config_validation as cv
-from esphome.components.esp32 import add_idf_sdkconfig_option, get_esp32_variant
-from esphome.core import CORE
 from esphome.const import (
+    CONF_ADVANCED,
+    CONF_FRAMEWORK,
     CONF_ID,
     CONF_MODE,
     CONF_SPEED,
+    PLATFORM_ESP32,
 )
+from esphome.core import CORE
+import esphome.final_validate as fv
 
 CODEOWNERS = ["@esphome/core"]
 
+DEPENDENCIES = [PLATFORM_ESP32]
+
+_LOGGER = logging.getLogger(__name__)
+
 psram_ns = cg.esphome_ns.namespace("psram")
 PsramComponent = psram_ns.class_("PsramComponent", cg.Component)
 
+TYPE_QUAD = "quad"
+TYPE_OCTAL = "octal"
+
+CONF_ENABLE_ECC = "enable_ecc"
+
 SPIRAM_MODES = {
-    "quad": "CONFIG_SPIRAM_MODE_QUAD",
-    "octal": "CONFIG_SPIRAM_MODE_OCT",
+    TYPE_QUAD: "CONFIG_SPIRAM_MODE_QUAD",
+    TYPE_OCTAL: "CONFIG_SPIRAM_MODE_OCT",
 }
 
 SPIRAM_SPEEDS = {
@@ -24,21 +46,57 @@ SPIRAM_SPEEDS = {
     120e6: "CONFIG_SPIRAM_SPEED_120M",
 }
 
+
+def validate_psram_mode(config):
+    if config[CONF_MODE] == TYPE_OCTAL and config[CONF_SPEED] == 120e6:
+        esp32_config = fv.full_config.get()[PLATFORM_ESP32]
+        if (
+            esp32_config[CONF_FRAMEWORK]
+            .get(CONF_ADVANCED, {})
+            .get(CONF_ENABLE_IDF_EXPERIMENTAL_FEATURES)
+        ):
+            _LOGGER.warning(
+                "120MHz PSRAM in octal mode is an experimental feature - use at your own risk"
+            )
+        else:
+            raise cv.Invalid("PSRAM 120MHz is not supported in octal mode")
+    if config[CONF_MODE] != TYPE_OCTAL and config[CONF_ENABLE_ECC]:
+        raise cv.Invalid("ECC is only available in octal mode.")
+    if config[CONF_MODE] == TYPE_OCTAL:
+        variant = get_esp32_variant()
+        if variant != VARIANT_ESP32S3:
+            raise cv.Invalid(
+                f"Octal PSRAM is only supported on ESP32-S3, not {variant}"
+            )
+    return config
+
+
 CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(PsramComponent),
-            cv.Optional(CONF_MODE): cv.enum(SPIRAM_MODES, lower=True),
-            cv.Optional(CONF_SPEED): cv.All(cv.frequency, cv.one_of(*SPIRAM_SPEEDS)),
+            cv.Optional(CONF_MODE, default=TYPE_QUAD): cv.enum(
+                SPIRAM_MODES, lower=True
+            ),
+            cv.Optional(CONF_ENABLE_ECC, default=False): cv.boolean,
+            cv.Optional(CONF_SPEED, default=40e6): cv.All(
+                cv.frequency, cv.one_of(*SPIRAM_SPEEDS)
+            ),
         }
     ),
-    cv.only_on_esp32,
+    only_on_variant(
+        supported=[VARIANT_ESP32, VARIANT_ESP32S3, VARIANT_ESP32S2],
+    ),
 )
 
+FINAL_VALIDATE_SCHEMA = validate_psram_mode
+
 
 async def to_code(config):
     if CORE.using_arduino:
         cg.add_build_flag("-DBOARD_HAS_PSRAM")
+        if config[CONF_MODE] == TYPE_OCTAL:
+            cg.add_platformio_option("board_build.arduino.memory_type", "qio_opi")
 
     if CORE.using_esp_idf:
         add_idf_sdkconfig_option(
@@ -49,10 +107,16 @@ async def to_code(config):
         add_idf_sdkconfig_option("CONFIG_SPIRAM_USE_CAPS_ALLOC", True)
         add_idf_sdkconfig_option("CONFIG_SPIRAM_IGNORE_NOTFOUND", True)
 
-        if CONF_MODE in config:
-            add_idf_sdkconfig_option(f"{SPIRAM_MODES[config[CONF_MODE]]}", True)
-        if CONF_SPEED in config:
-            add_idf_sdkconfig_option(f"{SPIRAM_SPEEDS[config[CONF_SPEED]]}", True)
+        add_idf_sdkconfig_option(f"{SPIRAM_MODES[config[CONF_MODE]]}", True)
+        add_idf_sdkconfig_option(f"{SPIRAM_SPEEDS[config[CONF_SPEED]]}", True)
+        if config[CONF_MODE] == TYPE_OCTAL and config[CONF_SPEED] == 120e6:
+            add_idf_sdkconfig_option("CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240", True)
+            # This works only on IDF 5.4.x but does no harm on earlier versions
+            add_idf_sdkconfig_option(
+                "CONFIG_SPIRAM_TIMING_TUNING_POINT_VIA_TEMPERATURE_SENSOR", True
+            )
+        if config[CONF_ENABLE_ECC]:
+            add_idf_sdkconfig_option("CONFIG_SPIRAM_ECC_ENABLE", True)
 
     cg.add_define("USE_PSRAM")
 

esphome/components/psram/psram.cpp

@@ -1,25 +1,36 @@
-#include "psram.h"
 
 #ifdef USE_ESP32
+#include "psram.h"
+#ifdef USE_ESP_IDF
+#include <esp_psram.h>
+#endif  // USE_ESP_IDF
 
 #include "esphome/core/log.h"
 
 #include <esp_heap_caps.h>
-#include <esp_idf_version.h>
 
 namespace esphome {
 namespace psram {
-
 static const char *const TAG = "psram";
 
 void PsramComponent::dump_config() {
+  ESP_LOGCONFIG(TAG, "PSRAM:");
+#ifdef USE_ESP_IDF
+  bool available = esp_psram_is_initialized();
+
+  ESP_LOGCONFIG(TAG, "  Available: %s", YESNO(available));
+  if (available) {
+    ESP_LOGCONFIG(TAG, "  Size: %zu KB", esp_psram_get_size() / 1024);
+#if CONFIG_SPIRAM_ECC_ENABLE
+    ESP_LOGCONFIG(TAG, "  ECC enabled: YES");
+#endif
+  }
+#else
   // Technically this can be false if the PSRAM is full, but heap_caps_get_total_size() isn't always available, and it's
   // very unlikely for the PSRAM to be full.
   bool available = heap_caps_get_free_size(MALLOC_CAP_SPIRAM) > 0;
-
-  ESP_LOGCONFIG(TAG, "PSRAM:");
   ESP_LOGCONFIG(TAG, "  Available: %s", YESNO(available));
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 1, 0)
+
   if (available) {
     const size_t psram_total_size_bytes = heap_caps_get_total_size(MALLOC_CAP_SPIRAM);
     const float psram_total_size_kb = psram_total_size_bytes / 1024.0f;
@@ -30,7 +41,7 @@ void PsramComponent::dump_config() {
       ESP_LOGCONFIG(TAG, "  Size: %zu bytes", psram_total_size_bytes);
     }
   }
-#endif
+#endif  // USE_ESP_IDF
 }
 
 }  // namespace psram

esphome/components/pulse_counter/sensor.py

@@ -1,22 +1,22 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_COUNT_MODE,
     CONF_FALLING_EDGE,
     CONF_ID,
     CONF_INTERNAL_FILTER,
+    CONF_NUMBER,
     CONF_PIN,
     CONF_RISING_EDGE,
-    CONF_NUMBER,
     CONF_TOTAL,
     CONF_VALUE,
     ICON_PULSE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_PULSES_PER_MINUTE,
     UNIT_PULSES,
+    UNIT_PULSES_PER_MINUTE,
 )
 from esphome.core import CORE
 

esphome/components/pulse_meter/sensor.py

@@ -1,13 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INTERNAL_FILTER,
     CONF_INTERNAL_FILTER_MODE,
-    CONF_PIN,
     CONF_NUMBER,
+    CONF_PIN,
     CONF_TIMEOUT,
     CONF_TOTAL,
     CONF_VALUE,

esphome/components/pulse_width/sensor.py

@@ -1,13 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import sensor
-from esphome.const import (
-    CONF_PIN,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_SECOND,
-    ICON_TIMER,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_PIN, ICON_TIMER, STATE_CLASS_MEASUREMENT, UNIT_SECOND
 
 pulse_width_ns = cg.esphome_ns.namespace("pulse_width")
 

esphome/components/pvvx_mithermometer/display/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import ble_client, display, time
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_AUTO_CLEAR_ENABLED,
     CONF_DISCONNECT_DELAY,

esphome/components/pvvx_mithermometer/sensor.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_LEVEL,
     CONF_BATTERY_VOLTAGE,
-    CONF_MAC_ADDRESS,
     CONF_HUMIDITY,
+    CONF_ID,
+    CONF_MAC_ADDRESS,
     CONF_SIGNAL_STRENGTH,
     CONF_TEMPERATURE,
-    CONF_ID,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_SIGNAL_STRENGTH,

esphome/components/pylontech/__init__.py

@@ -1,4 +1,5 @@
 import logging
+
 import esphome.codegen as cg
 from esphome.components import uart
 import esphome.config_validation as cv

esphome/components/pylontech/sensor/__init__.py

@@ -1,27 +1,22 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_VOLTAGE,
     CONF_CURRENT,
+    CONF_ID,
     CONF_TEMPERATURE,
-    UNIT_VOLT,
-    UNIT_AMPERE,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_BATTERY,
+    DEVICE_CLASS_VOLTAGE,
+    UNIT_AMPERE,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    CONF_ID,
+    UNIT_VOLT,
 )
 
-from .. import (
-    CONF_PYLONTECH_ID,
-    PYLONTECH_COMPONENT_SCHEMA,
-    CONF_BATTERY,
-    pylontech_ns,
-)
+from .. import CONF_BATTERY, CONF_PYLONTECH_ID, PYLONTECH_COMPONENT_SCHEMA, pylontech_ns
 
 PylontechSensor = pylontech_ns.class_("PylontechSensor", cg.Component)
 

esphome/components/pylontech/text_sensor/__init__.py

@@ -1,14 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
-from .. import (
-    CONF_PYLONTECH_ID,
-    PYLONTECH_COMPONENT_SCHEMA,
-    CONF_BATTERY,
-    pylontech_ns,
-)
+from .. import CONF_BATTERY, CONF_PYLONTECH_ID, PYLONTECH_COMPONENT_SCHEMA, pylontech_ns
 
 PylontechTextSensor = pylontech_ns.class_("PylontechTextSensor", cg.Component)
 

esphome/components/pzem004t/sensor.py

@@ -1,20 +1,20 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
+    CONF_ENERGY,
     CONF_ID,
     CONF_POWER,
     CONF_VOLTAGE,
-    CONF_ENERGY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )

esphome/components/pzemac/sensor.py

@@ -1,27 +1,27 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.components import sensor, modbus
+import esphome.codegen as cg
+from esphome.components import modbus, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
     CONF_ENERGY,
+    CONF_FREQUENCY,
     CONF_ID,
     CONF_POWER,
-    CONF_VOLTAGE,
-    CONF_FREQUENCY,
     CONF_POWER_FACTOR,
-    DEVICE_CLASS_POWER_FACTOR,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
-    DEVICE_CLASS_POWER,
     DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_VOLTAGE,
     ICON_CURRENT_AC,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
+    UNIT_AMPERE,
     UNIT_HERTZ,
     UNIT_VOLT,
-    UNIT_AMPERE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )

esphome/components/pzemdc/sensor.py

@@ -1,13 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.components import sensor, modbus
+import esphome.codegen as cg
+from esphome.components import modbus, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
+    CONF_ENERGY,
     CONF_ID,
     CONF_POWER,
-    CONF_ENERGY,
     CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
@@ -15,10 +15,10 @@ from esphome.const import (
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_VOLT,
     UNIT_AMPERE,
-    UNIT_WATT,
     UNIT_KILOWATT_HOURS,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
 
 AUTO_LOAD = ["modbus"]

esphome/components/qmc5883l/sensor.py

@@ -1,24 +1,24 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ADDRESS,
     CONF_FIELD_STRENGTH_X,
     CONF_FIELD_STRENGTH_Y,
     CONF_FIELD_STRENGTH_Z,
     CONF_HEADING,
-    CONF_TEMPERATURE,
     CONF_ID,
     CONF_OVERSAMPLING,
     CONF_RANGE,
+    CONF_TEMPERATURE,
+    CONF_UPDATE_INTERVAL,
     DEVICE_CLASS_TEMPERATURE,
     ICON_MAGNET,
+    ICON_SCREEN_ROTATION,
     STATE_CLASS_MEASUREMENT,
-    UNIT_MICROTESLA,
     UNIT_CELSIUS,
     UNIT_DEGREES,
-    ICON_SCREEN_ROTATION,
-    CONF_UPDATE_INTERVAL,
+    UNIT_MICROTESLA,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/qmp6988/sensor.py

@@ -1,8 +1,10 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
+    CONF_IIR_FILTER,
+    CONF_OVERSAMPLING,
     CONF_PRESSURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_PRESSURE,
@@ -10,8 +12,6 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_HECTOPASCAL,
-    CONF_IIR_FILTER,
-    CONF_OVERSAMPLING,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/qr_code/__init__.py

@@ -1,5 +1,5 @@
-import esphome.config_validation as cv
 import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_VALUE
 
 CONF_SCALE = "scale"

esphome/components/qspi_dbi/display.py

@@ -113,7 +113,7 @@ BASE_SCHEMA = display.FULL_DISPLAY_SCHEMA.extend(
             cs_pin_required=False,
             default_mode="MODE0",
             default_data_rate=10e6,
-            quad=True,
+            mode=spi.TYPE_QUAD,
         )
     )
 )

esphome/components/qspi_dbi/qspi_dbi.cpp

@@ -1,4 +1,4 @@
-#ifdef USE_ESP_IDF
+#if defined(USE_ESP_IDF) && defined(USE_ESP32_VARIANT_ESP32S3)
 #include "qspi_dbi.h"
 #include "esphome/core/log.h"
 

esphome/components/qspi_dbi/qspi_dbi.h

@@ -3,7 +3,7 @@
 //
 #pragma once
 
-#ifdef USE_ESP_IDF
+#if defined(USE_ESP_IDF) && defined(USE_ESP32_VARIANT_ESP32S3)
 #include "esphome/components/spi/spi.h"
 #include "esphome/components/display/display.h"
 #include "esphome/components/display/display_buffer.h"

esphome/components/qwiic_pir/binary_sensor.py

@@ -1,11 +1,8 @@
 from esphome import core
 import esphome.codegen as cg
+from esphome.components import binary_sensor, i2c
 import esphome.config_validation as cv
-from esphome.components import i2c, binary_sensor
-from esphome.const import (
-    CONF_DEBOUNCE,
-    DEVICE_CLASS_MOTION,
-)
+from esphome.const import CONF_DEBOUNCE, DEVICE_CLASS_MOTION
 
 DEPENDENCIES = ["i2c"]
 CODEOWNERS = ["@kahrendt"]

esphome/components/radon_eye_ble/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/radon_eye_rd200/sensor.py

@@ -1,14 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
-
 from esphome.const import (
-    STATE_CLASS_MEASUREMENT,
-    UNIT_BECQUEREL_PER_CUBIC_METER,
     CONF_ID,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
     ICON_RADIOACTIVE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_BECQUEREL_PER_CUBIC_METER,
 )
 
 DEPENDENCIES = ["ble_client"]

esphome/components/rc522/__init__.py

@@ -1,12 +1,12 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ON_TAG,
     CONF_ON_TAG_REMOVED,
-    CONF_TRIGGER_ID,
     CONF_RESET_PIN,
+    CONF_TRIGGER_ID,
 )
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rc522_i2c/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, rc522
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rc522_spi/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import rc522, spi
 import esphome.config_validation as cv
-from esphome.components import spi, rc522
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rdm6300/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_ON_TAG, CONF_TRIGGER_ID
 
 DEPENDENCIES = ["uart"]

esphome/components/rdm6300/binary_sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor, rdm6300
+import esphome.config_validation as cv
 from esphome.const import CONF_UID
+
 from . import rdm6300_ns
 
 DEPENDENCIES = ["rdm6300"]

esphome/components/resistance/sensor.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_REFERENCE_VOLTAGE,
     CONF_SENSOR,
+    ICON_FLASH,
     STATE_CLASS_MEASUREMENT,
     UNIT_OHM,
-    ICON_FLASH,
 )
 
 resistance_ns = cg.esphome_ns.namespace("resistance")

esphome/components/restart/button/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     DEVICE_CLASS_RESTART,

esphome/components/restart/switch/__init__.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
-from esphome.const import (
-    ENTITY_CATEGORY_CONFIG,
-    ICON_RESTART,
-)
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_RESTART
 
 restart_ns = cg.esphome_ns.namespace("restart")
 RestartSwitch = restart_ns.class_("RestartSwitch", switch.Switch, cg.Component)

esphome/components/rf_bridge/__init__.py

@@ -1,9 +1,10 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CODE,
+    CONF_DURATION,
     CONF_HIGH,
     CONF_ID,
     CONF_LENGTH,
@@ -12,7 +13,6 @@ from esphome.const import (
     CONF_RAW,
     CONF_SYNC,
     CONF_TRIGGER_ID,
-    CONF_DURATION,
 )
 
 DEPENDENCIES = ["uart"]