esphome 2025.3.2__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/ezo_pmp/sensor.py

@@ -1,20 +1,19 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    ENTITY_CATEGORY_DIAGNOSTIC,
-    ENTITY_CATEGORY_NONE,
+    CONF_ID,
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_VOLTAGE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ENTITY_CATEGORY_NONE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_NONE,
-    CONF_ID,
     UNIT_VOLT,
 )
 
 from . import EzoPMP
 
-
 DEPENDENCIES = ["ezo_pmp"]
 
 CONF_CURRENT_VOLUME_DOSED = "current_volume_dosed"

esphome/components/ezo_pmp/text_sensor.py

@@ -1,11 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
-from esphome.const import (
-    ENTITY_CATEGORY_NONE,
-    ENTITY_CATEGORY_DIAGNOSTIC,
-    CONF_ID,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, ENTITY_CATEGORY_DIAGNOSTIC, ENTITY_CATEGORY_NONE
 
 from . import EzoPMP
 

esphome/components/factory_reset/button/__init__.py

@@ -1,12 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     DEVICE_CLASS_RESTART,
     ENTITY_CATEGORY_CONFIG,
     ICON_RESTART_ALERT,
 )
+
 from .. import factory_reset_ns
 
 FactoryResetButton = factory_reset_ns.class_(

esphome/components/factory_reset/switch/__init__.py

@@ -1,14 +1,15 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ENTITY_CATEGORY,
+    CONF_ICON,
     CONF_ID,
     CONF_INVERTED,
-    CONF_ICON,
     ENTITY_CATEGORY_CONFIG,
     ICON_RESTART_ALERT,
 )
+
 from .. import factory_reset_ns
 
 FactoryResetSwitch = factory_reset_ns.class_(

esphome/components/fastled_base/__init__.py

@@ -1,11 +1,11 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_OUTPUT_ID,
+    CONF_MAX_REFRESH_RATE,
     CONF_NUM_LEDS,
+    CONF_OUTPUT_ID,
     CONF_RGB_ORDER,
-    CONF_MAX_REFRESH_RATE,
 )
 
 CODEOWNERS = ["@OttoWinter"]

esphome/components/fastled_clockless/light.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import fastled_base
+import esphome.config_validation as cv
 from esphome.const import CONF_CHIPSET, CONF_NUM_LEDS, CONF_PIN, CONF_RGB_ORDER
 
 AUTO_LOAD = ["fastled_base"]

esphome/components/fastled_spi/light.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import fastled_base
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHIPSET,
     CONF_CLOCK_PIN,

esphome/components/feedback/cover.py

@@ -1,18 +1,18 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import binary_sensor, cover
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ASSUMED_STATE,
     CONF_CLOSE_ACTION,
     CONF_CLOSE_DURATION,
     CONF_CLOSE_ENDSTOP,
     CONF_ID,
+    CONF_MAX_DURATION,
     CONF_OPEN_ACTION,
     CONF_OPEN_DURATION,
     CONF_OPEN_ENDSTOP,
     CONF_STOP_ACTION,
-    CONF_MAX_DURATION,
     CONF_UPDATE_INTERVAL,
 )
 

esphome/components/fingerprint_grow/__init__.py

@@ -1,8 +1,7 @@
+from esphome import automation, pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import automation
-from esphome import pins
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_COLOR,
     CONF_COUNT,
@@ -13,11 +12,11 @@ from esphome.const import (
     CONF_ON_ENROLLMENT_DONE,
     CONF_ON_ENROLLMENT_FAILED,
     CONF_ON_ENROLLMENT_SCAN,
-    CONF_ON_FINGER_SCAN_START,
+    CONF_ON_FINGER_SCAN_INVALID,
     CONF_ON_FINGER_SCAN_MATCHED,
-    CONF_ON_FINGER_SCAN_UNMATCHED,
     CONF_ON_FINGER_SCAN_MISPLACED,
-    CONF_ON_FINGER_SCAN_INVALID,
+    CONF_ON_FINGER_SCAN_START,
+    CONF_ON_FINGER_SCAN_UNMATCHED,
     CONF_PASSWORD,
     CONF_SENSING_PIN,
     CONF_SPEED,

esphome/components/fingerprint_grow/binary_sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_ICON, ICON_KEY_PLUS
+
 from . import CONF_FINGERPRINT_GROW_ID, FingerprintGrowComponent
 
 DEPENDENCIES = ["fingerprint_grow"]

esphome/components/fingerprint_grow/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CAPACITY,
     CONF_FINGERPRINT_COUNT,
@@ -15,6 +15,7 @@ from esphome.const import (
     ICON_FINGERPRINT,
     ICON_SECURITY,
 )
+
 from . import CONF_FINGERPRINT_GROW_ID, FingerprintGrowComponent
 
 DEPENDENCIES = ["fingerprint_grow"]

esphome/components/fs3000/sensor.py

@@ -1,13 +1,9 @@
 # initially based off of TMP117 component
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
-from esphome.const import (
-    CONF_MODEL,
-    DEVICE_CLASS_WIND_SPEED,
-    STATE_CLASS_MEASUREMENT,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_MODEL, DEVICE_CLASS_WIND_SPEED, STATE_CLASS_MEASUREMENT
 
 DEPENDENCIES = ["i2c"]
 CODEOWNERS = ["@kahrendt"]

esphome/components/ft5x06/touchscreen/__init__.py

@@ -1,9 +1,9 @@
 from esphome import pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
-
 from esphome.components import i2c, touchscreen
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_INTERRUPT_PIN
+
 from .. import ft5x06_ns
 
 FT5x06ButtonListener = ft5x06_ns.class_("FT5x06ButtonListener")

esphome/components/ft63x6/touchscreen.py

@@ -1,8 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import i2c, touchscreen
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN, CONF_THRESHOLD
 
 CODEOWNERS = ["@gpambrozio"]

esphome/components/fujitsu_general/climate.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import climate_ir
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]

esphome/components/gcja5/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import sensor, uart
 import esphome.config_validation as cv
-from esphome.components import uart, sensor
 from esphome.const import (
     CONF_ID,
     CONF_PM_1_0,
@@ -10,13 +10,13 @@ from esphome.const import (
     CONF_PMC_1_0,
     CONF_PMC_2_5,
     CONF_PMC_10_0,
-    UNIT_MICROGRAMS_PER_CUBIC_METER,
-    ICON_CHEMICAL_WEAPON,
-    ICON_COUNTER,
     DEVICE_CLASS_PM1,
     DEVICE_CLASS_PM10,
     DEVICE_CLASS_PM25,
+    ICON_CHEMICAL_WEAPON,
+    ICON_COUNTER,
     STATE_CLASS_MEASUREMENT,
+    UNIT_MICROGRAMS_PER_CUBIC_METER,
 )
 
 CODEOWNERS = ["@gcormier"]

esphome/components/gdk101/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@Szewcson"]

esphome/components/gdk101/binary_sensor.py

@@ -1,12 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_VIBRATIONS,
     DEVICE_CLASS_VIBRATION,
     ENTITY_CATEGORY_DIAGNOSTIC,
     ICON_VIBRATE,
 )
+
 from . import CONF_GDK101_ID, GDK101Component
 
 DEPENDENCIES = ["gdk101"]

esphome/components/gdk101/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    DEVICE_CLASS_DURATION,
-    DEVICE_CLASS_EMPTY,
-    ENTITY_CATEGORY_DIAGNOSTIC,
     CONF_MEASUREMENT_DURATION,
     CONF_STATUS,
     CONF_VERSION,
+    DEVICE_CLASS_DURATION,
+    DEVICE_CLASS_EMPTY,
+    ENTITY_CATEGORY_DIAGNOSTIC,
     ICON_RADIOACTIVE,
     ICON_TIMER,
     STATE_CLASS_MEASUREMENT,
@@ -15,6 +15,7 @@ from esphome.const import (
     UNIT_MICROSILVERTS_PER_HOUR,
     UNIT_SECOND,
 )
+
 from . import CONF_GDK101_ID, GDK101Component
 
 CONF_RADIATION_DOSE_PER_1M = "radiation_dose_per_1m"

esphome/components/globals/__init__.py

@@ -1,7 +1,6 @@
 import hashlib
 
-from esphome import config_validation as cv, automation
-from esphome import codegen as cg
+from esphome import automation, codegen as cg, config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INITIAL_VALUE,

esphome/components/gp2y1010au0f/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import output, sensor, voltage_sampler
 import esphome.config_validation as cv
-from esphome.components import sensor, voltage_sampler, output
 from esphome.const import (
-    CONF_SENSOR,
     CONF_OUTPUT,
+    CONF_SENSOR,
     DEVICE_CLASS_PM25,
+    ICON_CHEMICAL_WEAPON,
     STATE_CLASS_MEASUREMENT,
     UNIT_MICROGRAMS_PER_CUBIC_METER,
-    ICON_CHEMICAL_WEAPON,
 )
 
 DEPENDENCIES = ["output"]

esphome/components/gp8403/__init__.py

@@ -1,7 +1,6 @@
-import esphome.config_validation as cv
 import esphome.codegen as cg
-
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_VOLTAGE
 
 CODEOWNERS = ["@jesserockz"]

esphome/components/gp8403/output/__init__.py

@@ -1,10 +1,9 @@
-import esphome.config_validation as cv
 import esphome.codegen as cg
-
 from esphome.components import i2c, output
-from esphome.const import CONF_ID, CONF_CHANNEL
+import esphome.config_validation as cv
+from esphome.const import CONF_CHANNEL, CONF_ID
 
-from .. import gp8403_ns, GP8403, CONF_GP8403_ID
+from .. import CONF_GP8403_ID, GP8403, gp8403_ns
 
 DEPENDENCIES = ["gp8403"]
 

esphome/components/gpio/binary_sensor/__init__.py

@@ -1,8 +1,9 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_PIN
+
 from .. import gpio_ns
 
 GPIOBinarySensor = gpio_ns.class_(

esphome/components/gpio/one_wire/__init__.py

@@ -1,8 +1,9 @@
+from esphome import pins
 import esphome.codegen as cg
+from esphome.components.one_wire import OneWireBus
 import esphome.config_validation as cv
-from esphome import pins
 from esphome.const import CONF_ID, CONF_PIN
-from esphome.components.one_wire import OneWireBus
+
 from .. import gpio_ns
 
 CODEOWNERS = ["@ssieb"]

esphome/components/gpio/output/__init__.py

@@ -1,8 +1,9 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_PIN
+
 from .. import gpio_ns
 
 GPIOBinaryOutput = gpio_ns.class_("GPIOBinaryOutput", output.BinaryOutput, cg.Component)

esphome/components/gpio/switch/__init__.py

@@ -1,8 +1,9 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import switch
+import esphome.config_validation as cv
 from esphome.const import CONF_INTERLOCK, CONF_PIN
+
 from .. import gpio_ns
 
 GPIOSwitch = gpio_ns.class_("GPIOSwitch", switch.Switch, cg.Component)

esphome/components/gps/__init__.py

@@ -1,15 +1,14 @@
 import esphome.codegen as cg
+from esphome.components import sensor, uart
 import esphome.config_validation as cv
-from esphome.components import uart
-from esphome.components import sensor
 from esphome.const import (
+    CONF_ALTITUDE,
+    CONF_COURSE,
     CONF_ID,
     CONF_LATITUDE,
     CONF_LONGITUDE,
-    CONF_SPEED,
-    CONF_COURSE,
-    CONF_ALTITUDE,
     CONF_SATELLITES,
+    CONF_SPEED,
     STATE_CLASS_MEASUREMENT,
     UNIT_DEGREES,
     UNIT_KILOMETER_PER_HOUR,

esphome/components/gps/time/__init__.py

@@ -1,8 +1,9 @@
+import esphome.codegen as cg
 from esphome.components import time as time_
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import CONF_ID
-from .. import gps_ns, GPSListener, CONF_GPS_ID, GPS
+
+from .. import CONF_GPS_ID, GPS, GPSListener, gps_ns
 
 DEPENDENCIES = ["gps"]
 

esphome/components/graph/__init__.py

@@ -1,32 +1,32 @@
+import esphome.codegen as cg
+from esphome.components import color, sensor
 from esphome.components.font import Font
-from esphome.components import sensor, color
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import (
+    CONF_BORDER,
     CONF_COLOR,
     CONF_DIRECTION,
     CONF_DURATION,
+    CONF_HEIGHT,
     CONF_ID,
     CONF_LEGEND,
+    CONF_LINE_THICKNESS,
+    CONF_LINE_TYPE,
+    CONF_MAX_RANGE,
+    CONF_MAX_VALUE,
+    CONF_MIN_RANGE,
+    CONF_MIN_VALUE,
     CONF_NAME,
     CONF_NAME_FONT,
+    CONF_SENSOR,
     CONF_SHOW_LINES,
     CONF_SHOW_UNITS,
     CONF_SHOW_VALUES,
+    CONF_TRACES,
     CONF_VALUE_FONT,
     CONF_WIDTH,
-    CONF_SENSOR,
-    CONF_HEIGHT,
-    CONF_MIN_VALUE,
-    CONF_MAX_VALUE,
-    CONF_MIN_RANGE,
-    CONF_MAX_RANGE,
-    CONF_LINE_THICKNESS,
-    CONF_LINE_TYPE,
     CONF_X_GRID,
     CONF_Y_GRID,
-    CONF_BORDER,
-    CONF_TRACES,
 )
 
 CODEOWNERS = ["@synco"]

esphome/components/grove_tb6612fng/__init__.py

@@ -1,14 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import i2c
-
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
+    CONF_ADDRESS,
     CONF_CHANNEL,
-    CONF_SPEED,
     CONF_DIRECTION,
-    CONF_ADDRESS,
+    CONF_ID,
+    CONF_SPEED,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/growatt_solar/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import modbus, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, modbus
 from esphome.const import (
     CONF_ACTIVE_POWER,
     CONF_CURRENT,

esphome/components/gt911/binary_sensor/__init__.py

@@ -1,10 +1,10 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_INDEX
 
 from .. import gt911_ns
-from ..touchscreen import GT911Touchscreen, GT911ButtonListener
+from ..touchscreen import GT911ButtonListener, GT911Touchscreen
 
 CONF_GT911_ID = "gt911_id"
 

esphome/components/haier/binary_sensor/__init__.py

@@ -1,15 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import (
-    ENTITY_CATEGORY_DIAGNOSTIC,
-    ICON_FAN,
-    ICON_RADIATOR,
-)
-from ..climate import (
-    CONF_HAIER_ID,
-    HonClimate,
-)
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_DIAGNOSTIC, ICON_FAN, ICON_RADIATOR
+
+from ..climate import CONF_HAIER_ID, HonClimate
 
 CODEOWNERS = ["@paveldn"]
 BinarySensorTypeEnum = HonClimate.enum("SubBinarySensorType", True)

esphome/components/haier/button/__init__.py

@@ -1,11 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
-from ..climate import (
-    CONF_HAIER_ID,
-    HonClimate,
-    haier_ns,
-)
+import esphome.config_validation as cv
+
+from ..climate import CONF_HAIER_ID, HonClimate, haier_ns
 
 CODEOWNERS = ["@paveldn"]
 SelfCleaningButton = haier_ns.class_("SelfCleaningButton", button.Button)

esphome/components/haier/sensor/__init__.py

@@ -1,10 +1,10 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_HUMIDITY,
     CONF_OUTDOOR_TEMPERATURE,
     CONF_POWER,
-    CONF_HUMIDITY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_FREQUENCY,
     DEVICE_CLASS_HUMIDITY,
@@ -26,10 +26,8 @@ from esphome.const import (
     UNIT_PERCENT,
     UNIT_WATT,
 )
-from ..climate import (
-    CONF_HAIER_ID,
-    HonClimate,
-)
+
+from ..climate import CONF_HAIER_ID, HonClimate
 
 CODEOWNERS = ["@paveldn"]
 SensorTypeEnum = HonClimate.enum("SubSensorType", True)

esphome/components/haier/switch/__init__.py

@@ -1,18 +1,15 @@
 import esphome.codegen as cg
+from esphome.components import switch
 import esphome.config_validation as cv
+from esphome.const import CONF_BEEPER, CONF_DISPLAY, ENTITY_CATEGORY_CONFIG
 import esphome.final_validate as fv
-from esphome.components import switch
-from esphome.const import (
-    CONF_BEEPER,
-    CONF_DISPLAY,
-    ENTITY_CATEGORY_CONFIG,
-)
+
 from ..climate import (
     CONF_HAIER_ID,
     CONF_PROTOCOL,
+    PROTOCOL_HON,
     HaierClimateBase,
     haier_ns,
-    PROTOCOL_HON,
 )
 
 CODEOWNERS = ["@paveldn"]

esphome/components/haier/text_sensor/__init__.py

@@ -1,14 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
-from esphome.const import (
-    ENTITY_CATEGORY_DIAGNOSTIC,
-    ENTITY_CATEGORY_NONE,
-)
-from ..climate import (
-    CONF_HAIER_ID,
-    HonClimate,
-)
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_DIAGNOSTIC, ENTITY_CATEGORY_NONE
+
+from ..climate import CONF_HAIER_ID, HonClimate
 
 CODEOWNERS = ["@paveldn"]
 TextSensorTypeEnum = HonClimate.enum("SubTextSensorType", True)

esphome/components/havells_solar/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import modbus, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, modbus
 from esphome.const import (
     CONF_ACTIVE_POWER,
     CONF_CURRENT,