esphome 2025.3.2__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/__main__.py

@@ -133,7 +133,7 @@ def get_port_type(port):
     return "NETWORK"
 
 
-def run_miniterm(config, port):
+def run_miniterm(config, port, args):
     import serial
 
     from esphome import platformio_api
@@ -154,7 +154,7 @@ def run_miniterm(config, port):
 
     # We can't set to False by default since it leads to toggling and hence
     # ESP32 resets on some platforms.
-    if config["logger"][CONF_DEASSERT_RTS_DTR]:
+    if config["logger"][CONF_DEASSERT_RTS_DTR] or args.reset:
         ser.dtr = False
         ser.rts = False
 
@@ -244,11 +244,11 @@ def compile_program(args, config):
     return 0 if idedata is not None else 1
 
 
-def upload_using_esptool(config, port, file):
+def upload_using_esptool(config, port, file, speed):
     from esphome import platformio_api
 
-    first_baudrate = config[CONF_ESPHOME][CONF_PLATFORMIO_OPTIONS].get(
-        "upload_speed", 460800
+    first_baudrate = speed or config[CONF_ESPHOME][CONF_PLATFORMIO_OPTIONS].get(
+        "upload_speed", os.getenv("ESPHOME_UPLOAD_SPEED", "460800")
     )
 
     if file is not None:
@@ -348,7 +348,7 @@ def upload_program(config, args, host):
         check_permissions(host)
         if CORE.target_platform in (PLATFORM_ESP32, PLATFORM_ESP8266):
             file = getattr(args, "file", None)
-            return upload_using_esptool(config, host, file)
+            return upload_using_esptool(config, host, file, args.upload_speed)
 
         if CORE.target_platform in (PLATFORM_RP2040):
             return upload_using_platformio(config, args.device)
@@ -375,10 +375,12 @@ def upload_program(config, args, host):
     password = ota_conf.get(CONF_PASSWORD, "")
 
     if (
-        not is_ip_address(CORE.address)  # pylint: disable=too-many-boolean-expressions
-        and (get_port_type(host) == "MQTT" or config[CONF_MDNS][CONF_DISABLED])
-        and CONF_MQTT in config
+        CONF_MQTT in config  # pylint: disable=too-many-boolean-expressions
         and (not args.device or args.device in ("MQTT", "OTA"))
+        and (
+            ((config[CONF_MDNS][CONF_DISABLED]) and not is_ip_address(CORE.address))
+            or get_port_type(host) == "MQTT"
+        )
     ):
         from esphome import mqtt
 
@@ -397,7 +399,7 @@ def show_logs(config, args, port):
         raise EsphomeError("Logger is not configured!")
     if get_port_type(port) == "SERIAL":
         check_permissions(port)
-        return run_miniterm(config, port)
+        return run_miniterm(config, port, args)
     if get_port_type(port) == "NETWORK" and "api" in config:
         if config[CONF_MDNS][CONF_DISABLED] and CONF_MQTT in config:
             from esphome import mqtt
@@ -842,6 +844,10 @@ def parse_args(argv):
         "--device",
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
+    parser_upload.add_argument(
+        "--upload_speed",
+        help="Override the default or configured upload speed.",
+    )
     parser_upload.add_argument(
         "--file",
         help="Manually specify the binary file to upload.",
@@ -860,6 +866,13 @@ def parse_args(argv):
         "--device",
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
+    parser_logs.add_argument(
+        "--reset",
+        "-r",
+        action="store_true",
+        help="Reset the device before starting serial logs.",
+        default=os.getenv("ESPHOME_SERIAL_LOGGING_RESET"),
+    )
 
     parser_discover = subparsers.add_parser(
         "discover",
@@ -882,9 +895,20 @@ def parse_args(argv):
         "--device",
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
+    parser_run.add_argument(
+        "--upload_speed",
+        help="Override the default or configured upload speed.",
+    )
     parser_run.add_argument(
         "--no-logs", help="Disable starting logs.", action="store_true"
     )
+    parser_run.add_argument(
+        "--reset",
+        "-r",
+        action="store_true",
+        help="Reset the device before starting serial logs.",
+        default=os.getenv("ESPHOME_SERIAL_LOGGING_RESET"),
+    )
 
     parser_clean = subparsers.add_parser(
         "clean-mqtt",

esphome/components/a01nyub/sensor.py

@@ -1,10 +1,10 @@
 import esphome.codegen as cg
 from esphome.components import sensor, uart
 from esphome.const import (
+    DEVICE_CLASS_DISTANCE,
+    ICON_ARROW_EXPAND_VERTICAL,
     STATE_CLASS_MEASUREMENT,
     UNIT_METER,
-    ICON_ARROW_EXPAND_VERTICAL,
-    DEVICE_CLASS_DISTANCE,
 )
 
 CODEOWNERS = ["@MrSuicideParrot"]

esphome/components/a02yyuw/sensor.py

@@ -1,9 +1,9 @@
 import esphome.codegen as cg
 from esphome.components import sensor, uart
 from esphome.const import (
-    STATE_CLASS_MEASUREMENT,
-    ICON_ARROW_EXPAND_VERTICAL,
     DEVICE_CLASS_DISTANCE,
+    ICON_ARROW_EXPAND_VERTICAL,
+    STATE_CLASS_MEASUREMENT,
     UNIT_MILLIMETER,
 )
 

esphome/components/a4988/stepper.py

@@ -1,10 +1,9 @@
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import stepper
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import CONF_DIR_PIN, CONF_ID, CONF_SLEEP_PIN, CONF_STEP_PIN
 
-
 a4988_ns = cg.esphome_ns.namespace("a4988")
 A4988 = a4988_ns.class_("A4988", stepper.Stepper, cg.Component)
 

esphome/components/absolute_humidity/sensor.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_EQUATION,
     CONF_HUMIDITY,
     CONF_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    CONF_EQUATION,
     ICON_WATER,
+    STATE_CLASS_MEASUREMENT,
     UNIT_GRAMS_PER_CUBIC_METER,
 )
 

esphome/components/ac_dimmer/output.py

@@ -1,8 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import output
-from esphome.const import CONF_ID, CONF_MIN_POWER, CONF_METHOD
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_METHOD, CONF_MIN_POWER
 
 CODEOWNERS = ["@glmnet"]
 

esphome/components/adalight/__init__.py

@@ -1,8 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import uart
-from esphome.components.light.types import AddressableLightEffect
 from esphome.components.light.effects import register_addressable_effect
+from esphome.components.light.types import AddressableLightEffect
+import esphome.config_validation as cv
 from esphome.const import CONF_NAME, CONF_UART_ID
 
 DEPENDENCIES = ["uart"]

esphome/components/adc128s102/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import spi
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["spi"]

esphome/components/adc128s102/sensor/__init__.py

@@ -1,9 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, voltage_sampler
-from esphome.const import CONF_ID, CONF_CHANNEL
+import esphome.config_validation as cv
+from esphome.const import CONF_CHANNEL, CONF_ID
 
-from .. import adc128s102_ns, ADC128S102
+from .. import ADC128S102, adc128s102_ns
 
 AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["adc128s102"]

esphome/components/addressable_light/display.py

@@ -1,15 +1,15 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import display, light
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ADDRESSABLE_LIGHT_ID,
+    CONF_HEIGHT,
     CONF_ID,
     CONF_LAMBDA,
     CONF_PAGES,
-    CONF_ADDRESSABLE_LIGHT_ID,
-    CONF_HEIGHT,
-    CONF_WIDTH,
-    CONF_UPDATE_INTERVAL,
     CONF_PIXEL_MAPPER,
+    CONF_UPDATE_INTERVAL,
+    CONF_WIDTH,
 )
 
 CODEOWNERS = ["@justfalter"]

esphome/components/ade7880/sensor.py

@@ -1,7 +1,7 @@
+from esphome import pins
 import esphome.codegen as cg
+from esphome.components import i2c, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, i2c
-from esphome import pins
 from esphome.const import (
     CONF_ACTIVE_POWER,
     CONF_APPARENT_POWER,

esphome/components/ade7953_base/__init__.py

@@ -1,27 +1,27 @@
+from esphome import pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
-from esphome import pins
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_FREQUENCY,
     CONF_IRQ_PIN,
     CONF_VOLTAGE,
-    CONF_FREQUENCY,
     CONF_VOLTAGE_GAIN,
-    DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_APPARENT_POWER,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_FREQUENCY,
     DEVICE_CLASS_POWER,
-    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_VOLTAGE,
-    DEVICE_CLASS_FREQUENCY,
     STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
-    UNIT_HERTZ,
     UNIT_AMPERE,
+    UNIT_HERTZ,
+    UNIT_PERCENT,
+    UNIT_VOLT,
     UNIT_VOLT_AMPS,
-    UNIT_WATT,
     UNIT_VOLT_AMPS_REACTIVE,
-    UNIT_PERCENT,
+    UNIT_WATT,
 )
 
 CONF_CURRENT_A = "current_a"

esphome/components/ade7953_i2c/sensor.py

@@ -1,9 +1,8 @@
 import esphome.codegen as cg
+from esphome.components import ade7953_base, i2c
 import esphome.config_validation as cv
-from esphome.components import i2c, ade7953_base
 from esphome.const import CONF_ID
 
-
 DEPENDENCIES = ["i2c"]
 AUTO_LOAD = ["ade7953_base"]
 

esphome/components/ade7953_spi/sensor.py

@@ -1,9 +1,8 @@
 import esphome.codegen as cg
+from esphome.components import ade7953_base, spi
 import esphome.config_validation as cv
-from esphome.components import spi, ade7953_base
 from esphome.const import CONF_ID
 
-
 DEPENDENCIES = ["spi"]
 AUTO_LOAD = ["ade7953_base"]
 

esphome/components/ads1115/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]

esphome/components/ads1115/sensor/__init__.py

@@ -1,17 +1,18 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, voltage_sampler
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_GAIN,
+    CONF_ID,
     CONF_MULTIPLEXER,
     CONF_RESOLUTION,
     CONF_SAMPLE_RATE,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
-    CONF_ID,
 )
-from .. import ads1115_ns, ADS1115Component, CONF_ADS1115_ID
+
+from .. import CONF_ADS1115_ID, ADS1115Component, ads1115_ns
 
 AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["ads1115"]

esphome/components/ads1118/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import spi
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@solomondg1"]

esphome/components/ads1118/sensor/__init__.py

@@ -1,17 +1,18 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, voltage_sampler
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_GAIN,
     CONF_MULTIPLEXER,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_TYPE,
     DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_VOLT,
-    CONF_TYPE,
 )
-from .. import ads1118_ns, ADS1118, CONF_ADS1118_ID
+
+from .. import ADS1118, CONF_ADS1118_ID, ads1118_ns
 
 AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["ads1118"]

esphome/components/ags10/sensor.py

@@ -1,21 +1,21 @@
-import esphome.codegen as cg
 from esphome import automation
-import esphome.config_validation as cv
+import esphome.codegen as cg
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ADDRESS,
     CONF_ID,
-    ICON_RADIATOR,
-    ICON_RESTART,
+    CONF_MODE,
+    CONF_TVOC,
+    CONF_VALUE,
+    CONF_VERSION,
     DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
     ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_RADIATOR,
+    ICON_RESTART,
     STATE_CLASS_MEASUREMENT,
     UNIT_OHM,
     UNIT_PARTS_PER_BILLION,
-    CONF_ADDRESS,
-    CONF_TVOC,
-    CONF_VERSION,
-    CONF_MODE,
-    CONF_VALUE,
 )
 
 CONF_RESISTANCE = "resistance"

esphome/components/aht10/sensor.py

@@ -1,16 +1,16 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,
     CONF_TEMPERATURE,
+    CONF_VARIANT,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    CONF_VARIANT,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/airthings_ble/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/airthings_wave_base/__init__.py

@@ -1,18 +1,17 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
-
 from esphome.const import (
     CONF_BATTERY_VOLTAGE,
     CONF_HUMIDITY,
     CONF_PRESSURE,
     CONF_TEMPERATURE,
     CONF_TVOC,
-    DEVICE_CLASS_VOLTAGE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_PRESSURE,
     DEVICE_CLASS_TEMPERATURE,
     DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+    DEVICE_CLASS_VOLTAGE,
     ENTITY_CATEGORY_DIAGNOSTIC,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,

esphome/components/airthings_wave_mini/sensor.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import airthings_wave_base
-
-from esphome.const import (
-    CONF_ID,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID
 
 DEPENDENCIES = airthings_wave_base.DEPENDENCIES
 

esphome/components/airthings_wave_plus/sensor.py

@@ -1,20 +1,19 @@
 import esphome.codegen as cg
+from esphome.components import airthings_wave_base, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, airthings_wave_base
-
 from esphome.const import (
-    DEVICE_CLASS_CARBON_DIOXIDE,
-    STATE_CLASS_MEASUREMENT,
-    ICON_RADIOACTIVE,
+    CONF_CO2,
     CONF_ID,
+    CONF_ILLUMINANCE,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
-    CONF_CO2,
+    DEVICE_CLASS_CARBON_DIOXIDE,
+    DEVICE_CLASS_ILLUMINANCE,
+    ICON_RADIOACTIVE,
+    STATE_CLASS_MEASUREMENT,
     UNIT_BECQUEREL_PER_CUBIC_METER,
-    UNIT_PARTS_PER_MILLION,
-    CONF_ILLUMINANCE,
     UNIT_LUX,
-    DEVICE_CLASS_ILLUMINANCE,
+    UNIT_PARTS_PER_MILLION,
 )
 
 DEPENDENCIES = airthings_wave_base.DEPENDENCIES

esphome/components/alpha3/sensor.py

@@ -1,20 +1,20 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
 from esphome.const import (
-    CONF_ID,
     CONF_CURRENT,
     CONF_FLOW,
     CONF_HEAD,
+    CONF_ID,
     CONF_POWER,
     CONF_SPEED,
     CONF_VOLTAGE,
     UNIT_AMPERE,
-    UNIT_VOLT,
-    UNIT_WATT,
-    UNIT_METER,
     UNIT_CUBIC_METER_PER_HOUR,
+    UNIT_METER,
     UNIT_REVOLUTIONS_PER_MINUTE,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
 
 alpha3_ns = cg.esphome_ns.namespace("alpha3")

esphome/components/am2315c/am2315c.cpp

@@ -128,7 +128,7 @@ void AM2315C::update() {
   data[2] = 0x00;
   if (this->write(data, 3) != i2c::ERROR_OK) {
     ESP_LOGE(TAG, "Write failed!");
-    this->mark_failed();
+    this->status_set_warning();
     return;
   }
 
@@ -138,12 +138,12 @@ void AM2315C::update() {
     uint8_t status = 0;
     if (this->read(&status, 1) != i2c::ERROR_OK) {
       ESP_LOGE(TAG, "Read failed!");
-      this->mark_failed();
+      this->status_set_warning();
       return;
     }
     if ((status & 0x80) == 0x80) {
       ESP_LOGE(TAG, "HW still busy!");
-      this->mark_failed();
+      this->status_set_warning();
       return;
     }
 
@@ -151,7 +151,7 @@ void AM2315C::update() {
     uint8_t data[7];
     if (this->read(data, 7) != i2c::ERROR_OK) {
       ESP_LOGE(TAG, "Read failed!");
-      this->mark_failed();
+      this->status_set_warning();
       return;
     }
 

esphome/components/am2315c/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/am2320/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/am43/cover/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, cover
 import esphome.config_validation as cv
-from esphome.components import cover, ble_client
 from esphome.const import CONF_ID, CONF_PIN
 
 CODEOWNERS = ["@buxtronix"]

esphome/components/am43/sensor/__init__.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
 from esphome.const import (
-    CONF_ID,
     CONF_BATTERY_LEVEL,
+    CONF_ID,
+    CONF_ILLUMINANCE,
     DEVICE_CLASS_BATTERY,
     ENTITY_CATEGORY_DIAGNOSTIC,
-    CONF_ILLUMINANCE,
     ICON_BRIGHTNESS_5,
     UNIT_PERCENT,
 )

esphome/components/analog_threshold/binary_sensor.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor, sensor
-from esphome.const import (
-    CONF_SENSOR_ID,
-    CONF_THRESHOLD,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_SENSOR_ID, CONF_THRESHOLD
 
 analog_threshold_ns = cg.esphome_ns.namespace("analog_threshold")
 

esphome/components/anova/climate.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, climate
 import esphome.config_validation as cv
-from esphome.components import climate, ble_client
 from esphome.const import CONF_ID, CONF_UNIT_OF_MEASUREMENT
 
 UNITS = {

esphome/components/apds9306/sensor.py

@@ -2,8 +2,8 @@
 # https://www.mouser.ca/datasheet/2/678/AVGO_S_A0002854364_1-2574547.pdf
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_GAIN,
     DEVICE_CLASS_ILLUMINANCE,

esphome/components/apds9960/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]

esphome/components/apds9960/binary_sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_DIRECTION, DEVICE_CLASS_MOVING
+
 from . import APDS9960, CONF_APDS9960_ID
 
 DEPENDENCIES = ["apds9960"]