esphome 2025.3.2__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/servo/__init__.py

@@ -1,15 +1,15 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
 from esphome.components.output import FloatOutput
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_IDLE_LEVEL,
+    CONF_LEVEL,
     CONF_MAX_LEVEL,
     CONF_MIN_LEVEL,
     CONF_OUTPUT,
-    CONF_LEVEL,
     CONF_RESTORE,
     CONF_TRANSITION_LENGTH,
 )

esphome/components/sfa30/sensor.py

@@ -1,22 +1,21 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
-
 from esphome.const import (
-    CONF_ID,
     CONF_FORMALDEHYDE,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_TEMPERATURE,
     DEVICE_CLASS_GAS,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
     ICON_RADIATOR,
-    ICON_WATER_PERCENT,
     ICON_THERMOMETER,
+    ICON_WATER_PERCENT,
     STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
     UNIT_PARTS_PER_BILLION,
     UNIT_PERCENT,
-    UNIT_CELSIUS,
 )
 
 CODEOWNERS = ["@ghsensdev"]

esphome/components/sgp4x/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
     CONF_COMPENSATION,
     CONF_ID,
     CONF_STORE_BASELINE,
     CONF_TEMPERATURE_SOURCE,
-    ICON_RADIATOR,
     DEVICE_CLASS_AQI,
+    ICON_RADIATOR,
     STATE_CLASS_MEASUREMENT,
 )
 

esphome/components/shelly_dimmer/light.py

@@ -1,32 +1,32 @@
-from pathlib import Path
 import hashlib
+from pathlib import Path
 import re
-import requests
 
+import requests
 
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import light, sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_OUTPUT_ID,
+    CONF_CURRENT,
     CONF_GAMMA_CORRECT,
+    CONF_MAX_BRIGHTNESS,
+    CONF_MIN_BRIGHTNESS,
+    CONF_OUTPUT_ID,
     CONF_POWER,
-    CONF_VOLTAGE,
-    CONF_CURRENT,
-    CONF_VERSION,
-    CONF_URL,
     CONF_UPDATE_INTERVAL,
-    UNIT_VOLT,
-    UNIT_AMPERE,
-    UNIT_WATT,
+    CONF_URL,
+    CONF_VERSION,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
-    DEVICE_CLASS_CURRENT,
-    CONF_MIN_BRIGHTNESS,
-    CONF_MAX_BRIGHTNESS,
+    UNIT_AMPERE,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
-from esphome.core import HexInt, CORE
+from esphome.core import CORE, HexInt
 
 DOMAIN = "shelly_dimmer"
 AUTO_LOAD = ["sensor"]

esphome/components/sht3xd/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/sht4x/sensor.py

@@ -1,17 +1,17 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
+    CONF_HUMIDITY,
     CONF_ID,
     CONF_TEMPERATURE,
-    CONF_HUMIDITY,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
+    ICON_THERMOMETER,
+    ICON_WATER_PERCENT,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    ICON_THERMOMETER,
-    ICON_WATER_PERCENT,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_HUMIDITY,
 )
 
 CODEOWNERS = ["@sjtrny"]

esphome/components/shtcx/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/shutdown/button/__init__.py

@@ -1,11 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
-from esphome.const import (
-    CONF_ID,
-    ENTITY_CATEGORY_CONFIG,
-    ICON_POWER,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, ENTITY_CATEGORY_CONFIG, ICON_POWER
 
 shutdown_ns = cg.esphome_ns.namespace("shutdown")
 ShutdownButton = shutdown_ns.class_("ShutdownButton", button.Button, cg.Component)

esphome/components/shutdown/switch/__init__.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
-from esphome.const import (
-    ENTITY_CATEGORY_CONFIG,
-    ICON_POWER,
-)
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_POWER
 
 shutdown_ns = cg.esphome_ns.namespace("shutdown")
 ShutdownSwitch = shutdown_ns.class_("ShutdownSwitch", switch.Switch, cg.Component)

esphome/components/sigma_delta_output/output.py

@@ -1,13 +1,8 @@
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import output
 import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome.const import (
-    CONF_ID,
-    CONF_PIN,
-    CONF_TURN_ON_ACTION,
-    CONF_TURN_OFF_ACTION,
-)
+from esphome.const import CONF_ID, CONF_PIN, CONF_TURN_OFF_ACTION, CONF_TURN_ON_ACTION
 
 DEPENDENCIES = []
 

esphome/components/sim800l/__init__.py

@@ -1,12 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
-from esphome.const import (
-    CONF_ID,
-    CONF_MESSAGE,
-    CONF_TRIGGER_ID,
-)
+import esphome.codegen as cg
 from esphome.components import uart
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_MESSAGE, CONF_TRIGGER_ID
 
 DEPENDENCIES = ["uart"]
 CODEOWNERS = ["@glmnet"]

esphome/components/sim800l/binary_sensor.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import (
-    DEVICE_CLASS_CONNECTIVITY,
-    ENTITY_CATEGORY_DIAGNOSTIC,
-)
+import esphome.config_validation as cv
+from esphome.const import DEVICE_CLASS_CONNECTIVITY, ENTITY_CATEGORY_DIAGNOSTIC
+
 from . import CONF_SIM800L_ID, Sim800LComponent
 
 DEPENDENCIES = ["sim800l"]

esphome/components/sim800l/sensor.py

@@ -1,12 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     DEVICE_CLASS_SIGNAL_STRENGTH,
     ENTITY_CATEGORY_DIAGNOSTIC,
     STATE_CLASS_MEASUREMENT,
     UNIT_DECIBEL_MILLIWATT,
 )
+
 from . import CONF_SIM800L_ID, Sim800LComponent
 
 DEPENDENCIES = ["sim800l"]

esphome/components/slow_pwm/output.py

@@ -1,14 +1,13 @@
-from esphome import pins, core
+from esphome import automation, core, pins
+import esphome.codegen as cg
 from esphome.components import output
 import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome import automation
 from esphome.const import (
     CONF_ID,
-    CONF_PIN,
     CONF_PERIOD,
-    CONF_TURN_ON_ACTION,
+    CONF_PIN,
     CONF_TURN_OFF_ACTION,
+    CONF_TURN_ON_ACTION,
 )
 
 slow_pwm_ns = cg.esphome_ns.namespace("slow_pwm")

esphome/components/sm10bit_base/__init__.py

@@ -1,11 +1,7 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
-from esphome.const import (
-    CONF_CLOCK_PIN,
-    CONF_DATA_PIN,
-    CONF_ID,
-)
+from esphome.const import CONF_CLOCK_PIN, CONF_DATA_PIN, CONF_ID
 
 CODEOWNERS = ["@Cossid"]
 MULTI_CONF = True

esphome/components/sm16716/__init__.py

@@ -1,6 +1,6 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
 from esphome.const import (
     CONF_CLOCK_PIN,
     CONF_DATA_PIN,

esphome/components/sm16716/output.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL, CONF_ID
+
 from . import SM16716
 
 DEPENDENCIES = ["sm16716"]

esphome/components/sm2135/__init__.py

@@ -1,11 +1,7 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
-from esphome.const import (
-    CONF_CLOCK_PIN,
-    CONF_DATA_PIN,
-    CONF_ID,
-)
+from esphome.const import CONF_CLOCK_PIN, CONF_DATA_PIN, CONF_ID
 
 AUTO_LOAD = ["output"]
 CODEOWNERS = ["@BoukeHaarsma23", "@matika77", "@dd32"]

esphome/components/sm2135/output.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL, CONF_ID
+
 from . import SM2135
 
 DEPENDENCIES = ["sm2135"]

esphome/components/sm2235/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sm10bit_base
+import esphome.config_validation as cv
 
 AUTO_LOAD = ["sm10bit_base", "output"]
 CODEOWNERS = ["@Cossid"]

esphome/components/sm2235/output.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL, CONF_ID
+
 from . import SM2235
 
 DEPENDENCIES = ["sm2235"]

esphome/components/sm2335/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sm10bit_base
+import esphome.config_validation as cv
 
 AUTO_LOAD = ["sm10bit_base", "output"]
 CODEOWNERS = ["@Cossid"]

esphome/components/sm2335/output.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
+import esphome.config_validation as cv
 from esphome.const import CONF_CHANNEL, CONF_ID
+
 from . import SM2335
 
 DEPENDENCIES = ["sm2335"]

esphome/components/sm300d2/sensor.py

@@ -1,30 +1,30 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_CO2,
     CONF_FORMALDEHYDE,
-    CONF_TVOC,
+    CONF_HUMIDITY,
+    CONF_ID,
     CONF_PM_2_5,
     CONF_PM_10_0,
     CONF_TEMPERATURE,
-    CONF_HUMIDITY,
+    CONF_TVOC,
     DEVICE_CLASS_CARBON_DIOXIDE,
-    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
-    DEVICE_CLASS_PM25,
+    DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_PM10,
+    DEVICE_CLASS_PM25,
     DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
+    ICON_CHEMICAL_WEAPON,
+    ICON_FLASK,
+    ICON_GRAIN,
+    ICON_MOLECULE_CO2,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PARTS_PER_MILLION,
-    UNIT_MICROGRAMS_PER_CUBIC_METER,
     UNIT_CELSIUS,
+    UNIT_MICROGRAMS_PER_CUBIC_METER,
+    UNIT_PARTS_PER_MILLION,
     UNIT_PERCENT,
-    ICON_MOLECULE_CO2,
-    ICON_FLASK,
-    ICON_CHEMICAL_WEAPON,
-    ICON_GRAIN,
 )
 
 DEPENDENCIES = ["uart"]

esphome/components/sml/__init__.py

@@ -2,8 +2,8 @@ import re
 
 from esphome import automation
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_TRIGGER_ID
 
 CODEOWNERS = ["@alengwenus"]

esphome/components/sml/sensor/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 from .. import CONF_OBIS_CODE, CONF_SERVER_ID, CONF_SML_ID, Sml, obis_code, sml_ns

esphome/components/sml/sml.cpp

@@ -52,9 +52,8 @@ void Sml::loop() {
             break;
 
           // remove start/end sequence
-          this->sml_data_.erase(this->sml_data_.begin(), this->sml_data_.begin() + START_SEQ.size());
-          this->sml_data_.resize(this->sml_data_.size() - 8);
-          this->process_sml_file_(this->sml_data_);
+          this->process_sml_file_(
+              BytesView(this->sml_data_).subview(START_SEQ.size(), this->sml_data_.size() - START_SEQ.size() - 8));
         }
         break;
       };
@@ -66,8 +65,8 @@ void Sml::add_on_data_callback(std::function<void(std::vector<uint8_t>, bool)> &
   this->data_callbacks_.add(std::move(callback));
 }
 
-void Sml::process_sml_file_(const bytes &sml_data) {
-  SmlFile sml_file = SmlFile(sml_data);
+void Sml::process_sml_file_(const BytesView &sml_data) {
+  SmlFile sml_file(sml_data);
   std::vector<ObisInfo> obis_info = sml_file.get_obis_info();
   this->publish_obis_info_(obis_info);
 
@@ -75,6 +74,7 @@ void Sml::process_sml_file_(const bytes &sml_data) {
 }
 
 void Sml::log_obis_info_(const std::vector<ObisInfo> &obis_info_vec) {
+#ifdef ESPHOME_LOG_HAS_DEBUG
   ESP_LOGD(TAG, "OBIS info:");
   for (auto const &obis_info : obis_info_vec) {
     std::string info;
@@ -83,6 +83,7 @@ void Sml::log_obis_info_(const std::vector<ObisInfo> &obis_info_vec) {
     info += " [0x" + bytes_repr(obis_info.value) + "]";
     ESP_LOGD(TAG, "%s", info.c_str());
   }
+#endif
 }
 
 void Sml::publish_obis_info_(const std::vector<ObisInfo> &obis_info_vec) {
@@ -92,10 +93,11 @@ void Sml::publish_obis_info_(const std::vector<ObisInfo> &obis_info_vec) {
 }
 
 void Sml::publish_value_(const ObisInfo &obis_info) {
+  const auto obis_code = obis_info.code_repr();
   for (auto const &sml_listener : sml_listeners_) {
     if ((!sml_listener->server_id.empty()) && (bytes_repr(obis_info.server_id) != sml_listener->server_id))
       continue;
-    if (obis_info.code_repr() != sml_listener->obis_code)
+    if (obis_code != sml_listener->obis_code)
       continue;
     sml_listener->publish_val(obis_info);
   }

esphome/components/sml/sml.h

@@ -27,7 +27,7 @@ class Sml : public Component, public uart::UARTDevice {
   void add_on_data_callback(std::function<void(std::vector<uint8_t>, bool)> &&callback);
 
  protected:
-  void process_sml_file_(const bytes &sml_data);
+  void process_sml_file_(const BytesView &sml_data);
   void log_obis_info_(const std::vector<ObisInfo> &obis_info_vec);
   void publish_obis_info_(const std::vector<ObisInfo> &obis_info_vec);
   char check_start_end_bytes_(uint8_t byte);

esphome/components/sml/sml_parser.cpp

@@ -5,17 +5,17 @@
 namespace esphome {
 namespace sml {
 
-SmlFile::SmlFile(bytes buffer) : buffer_(std::move(buffer)) {
+SmlFile::SmlFile(const BytesView &buffer) : buffer_(buffer) {
   // extract messages
   this->pos_ = 0;
   while (this->pos_ < this->buffer_.size()) {
     if (this->buffer_[this->pos_] == 0x00)
       break;  // EndOfSmlMsg
 
-    SmlNode message = SmlNode();
+    SmlNode message;
     if (!this->setup_node(&message))
       break;
-    this->messages.emplace_back(message);
+    this->messages.emplace_back(std::move(message));
   }
 }
 
@@ -62,22 +62,20 @@ bool SmlFile::setup_node(SmlNode *node) {
     return false;
 
   node->type = type;
-  node->nodes.clear();
-  node->value_bytes.clear();
 
   if (type == SML_LIST) {
     node->nodes.reserve(length);
     for (size_t i = 0; i != length; i++) {
-      SmlNode child_node = SmlNode();
+      SmlNode child_node;
       if (!this->setup_node(&child_node))
         return false;
-      node->nodes.emplace_back(child_node);
+      node->nodes.emplace_back(std::move(child_node));
     }
   } else {
     // Value starts at the current position
     // Value ends "length" bytes later,
     // (since the TL field is counted but already subtracted from length)
-    node->value_bytes = bytes(this->buffer_.begin() + this->pos_, this->buffer_.begin() + this->pos_ + length);
+    node->value_bytes = buffer_.subview(this->pos_, length);
     // Increment the pointer past all consumed bytes
     this->pos_ += length;
   }
@@ -87,14 +85,14 @@ bool SmlFile::setup_node(SmlNode *node) {
 std::vector<ObisInfo> SmlFile::get_obis_info() {
   std::vector<ObisInfo> obis_info;
   for (auto const &message : messages) {
-    SmlNode message_body = message.nodes[3];
+    const auto &message_body = message.nodes[3];
     uint16_t message_type = bytes_to_uint(message_body.nodes[0].value_bytes);
     if (message_type != SML_GET_LIST_RES)
       continue;
 
-    SmlNode get_list_response = message_body.nodes[1];
-    bytes server_id = get_list_response.nodes[1].value_bytes;
-    SmlNode val_list = get_list_response.nodes[4];
+    const auto &get_list_response = message_body.nodes[1];
+    const auto &server_id = get_list_response.nodes[1].value_bytes;
+    const auto &val_list = get_list_response.nodes[4];
 
     for (auto const &val_list_entry : val_list.nodes) {
       obis_info.emplace_back(server_id, val_list_entry);
@@ -103,7 +101,7 @@ std::vector<ObisInfo> SmlFile::get_obis_info() {
   return obis_info;
 }
 
-std::string bytes_repr(const bytes &buffer) {
+std::string bytes_repr(const BytesView &buffer) {
   std::string repr;
   for (auto const value : buffer) {
     repr += str_sprintf("%02x", value & 0xff);
@@ -111,7 +109,7 @@ std::string bytes_repr(const bytes &buffer) {
   return repr;
 }
 
-uint64_t bytes_to_uint(const bytes &buffer) {
+uint64_t bytes_to_uint(const BytesView &buffer) {
   uint64_t val = 0;
   for (auto const value : buffer) {
     val = (val << 8) + value;
@@ -119,7 +117,7 @@ uint64_t bytes_to_uint(const bytes &buffer) {
   return val;
 }
 
-int64_t bytes_to_int(const bytes &buffer) {
+int64_t bytes_to_int(const BytesView &buffer) {
   uint64_t tmp = bytes_to_uint(buffer);
   int64_t val;
 
@@ -135,14 +133,14 @@ int64_t bytes_to_int(const bytes &buffer) {
   return val;
 }
 
-std::string bytes_to_string(const bytes &buffer) { return std::string(buffer.begin(), buffer.end()); }
+std::string bytes_to_string(const BytesView &buffer) { return std::string(buffer.begin(), buffer.end()); }
 
-ObisInfo::ObisInfo(bytes server_id, SmlNode val_list_entry) : server_id(std::move(server_id)) {
+ObisInfo::ObisInfo(const BytesView &server_id, const SmlNode &val_list_entry) : server_id(server_id) {
   this->code = val_list_entry.nodes[0].value_bytes;
   this->status = val_list_entry.nodes[1].value_bytes;
   this->unit = bytes_to_uint(val_list_entry.nodes[3].value_bytes);
   this->scaler = bytes_to_int(val_list_entry.nodes[4].value_bytes);
-  SmlNode value_node = val_list_entry.nodes[5];
+  const auto &value_node = val_list_entry.nodes[5];
   this->value = value_node.value_bytes;
   this->value_type = value_node.type;
 }