esphome 2024.12.3__py3-none-any.whl

esphome/components/toshiba/toshiba.cpp

@@ -0,0 +1,768 @@
+#include "toshiba.h"
+
+#include <vector>
+
+namespace esphome {
+namespace toshiba {
+
+struct RacPt1411hwruFanSpeed {
+  uint8_t code1;
+  uint8_t code2;
+};
+
+static const char *const TAG = "toshiba.climate";
+// Timings for IR bits/data
+const uint16_t TOSHIBA_HEADER_MARK = 4380;
+const uint16_t TOSHIBA_HEADER_SPACE = 4370;
+const uint16_t TOSHIBA_GAP_SPACE = 5480;
+const uint16_t TOSHIBA_PACKET_SPACE = 10500;
+const uint16_t TOSHIBA_BIT_MARK = 540;
+const uint16_t TOSHIBA_ZERO_SPACE = 540;
+const uint16_t TOSHIBA_ONE_SPACE = 1620;
+const uint16_t TOSHIBA_CARRIER_FREQUENCY = 38000;
+const uint8_t TOSHIBA_HEADER_LENGTH = 4;
+// Generic Toshiba commands/flags
+const uint8_t TOSHIBA_COMMAND_DEFAULT = 0x01;
+const uint8_t TOSHIBA_COMMAND_TIMER = 0x02;
+const uint8_t TOSHIBA_COMMAND_POWER = 0x08;
+const uint8_t TOSHIBA_COMMAND_MOTION = 0x02;
+
+const uint8_t TOSHIBA_MODE_AUTO = 0x00;
+const uint8_t TOSHIBA_MODE_COOL = 0x01;
+const uint8_t TOSHIBA_MODE_DRY = 0x02;
+const uint8_t TOSHIBA_MODE_HEAT = 0x03;
+const uint8_t TOSHIBA_MODE_FAN_ONLY = 0x04;
+const uint8_t TOSHIBA_MODE_OFF = 0x07;
+
+const uint8_t TOSHIBA_FAN_SPEED_AUTO = 0x00;
+const uint8_t TOSHIBA_FAN_SPEED_QUIET = 0x20;
+const uint8_t TOSHIBA_FAN_SPEED_1 = 0x40;
+const uint8_t TOSHIBA_FAN_SPEED_2 = 0x60;
+const uint8_t TOSHIBA_FAN_SPEED_3 = 0x80;
+const uint8_t TOSHIBA_FAN_SPEED_4 = 0xa0;
+const uint8_t TOSHIBA_FAN_SPEED_5 = 0xc0;
+
+const uint8_t TOSHIBA_POWER_HIGH = 0x01;
+const uint8_t TOSHIBA_POWER_ECO = 0x03;
+
+const uint8_t TOSHIBA_MOTION_SWING = 0x04;
+const uint8_t TOSHIBA_MOTION_FIX = 0x00;
+
+// RAC-PT1411HWRU temperature code flag bits
+const uint8_t RAC_PT1411HWRU_FLAG_FAH = 0x01;
+const uint8_t RAC_PT1411HWRU_FLAG_FRAC = 0x20;
+const uint8_t RAC_PT1411HWRU_FLAG_NEG = 0x10;
+// RAC-PT1411HWRU temperature short code flags mask
+const uint8_t RAC_PT1411HWRU_FLAG_MASK = 0x0F;
+// RAC-PT1411HWRU Headers, Footers and such
+const uint8_t RAC_PT1411HWRU_MESSAGE_HEADER0 = 0xB2;
+const uint8_t RAC_PT1411HWRU_MESSAGE_HEADER1 = 0xD5;
+const uint8_t RAC_PT1411HWRU_MESSAGE_LENGTH = 6;
+// RAC-PT1411HWRU "Comfort Sense" feature bits
+const uint8_t RAC_PT1411HWRU_CS_ENABLED = 0x40;
+const uint8_t RAC_PT1411HWRU_CS_DATA = 0x80;
+const uint8_t RAC_PT1411HWRU_CS_HEADER = 0xBA;
+const uint8_t RAC_PT1411HWRU_CS_FOOTER_AUTO = 0x7A;
+const uint8_t RAC_PT1411HWRU_CS_FOOTER_COOL = 0x72;
+const uint8_t RAC_PT1411HWRU_CS_FOOTER_HEAT = 0x7E;
+// RAC-PT1411HWRU Swing
+const uint8_t RAC_PT1411HWRU_SWING_HEADER = 0xB9;
+const std::vector<uint8_t> RAC_PT1411HWRU_SWING_VERTICAL{0xB9, 0x46, 0xF5, 0x0A, 0x04, 0xFB};
+const std::vector<uint8_t> RAC_PT1411HWRU_SWING_OFF{0xB9, 0x46, 0xF5, 0x0A, 0x05, 0xFA};
+// RAC-PT1411HWRU Fan speeds
+const uint8_t RAC_PT1411HWRU_FAN_OFF = 0x7B;
+constexpr RacPt1411hwruFanSpeed RAC_PT1411HWRU_FAN_AUTO{0xBF, 0x66};
+constexpr RacPt1411hwruFanSpeed RAC_PT1411HWRU_FAN_LOW{0x9F, 0x28};
+constexpr RacPt1411hwruFanSpeed RAC_PT1411HWRU_FAN_MED{0x5F, 0x3C};
+constexpr RacPt1411hwruFanSpeed RAC_PT1411HWRU_FAN_HIGH{0x3F, 0x64};
+// RAC-PT1411HWRU Fan speed for Auto and Dry climate modes
+const RacPt1411hwruFanSpeed RAC_PT1411HWRU_NO_FAN{0x1F, 0x65};
+// RAC-PT1411HWRU Modes
+const uint8_t RAC_PT1411HWRU_MODE_AUTO = 0x08;
+const uint8_t RAC_PT1411HWRU_MODE_COOL = 0x00;
+const uint8_t RAC_PT1411HWRU_MODE_DRY = 0x04;
+const uint8_t RAC_PT1411HWRU_MODE_FAN = 0x04;
+const uint8_t RAC_PT1411HWRU_MODE_HEAT = 0x0C;
+const uint8_t RAC_PT1411HWRU_MODE_OFF = 0x00;
+// RAC-PT1411HWRU Fan-only "temperature"/system off
+const uint8_t RAC_PT1411HWRU_TEMPERATURE_FAN_ONLY = 0x0E;
+// RAC-PT1411HWRU temperature codes are not sequential; they instead follow a modified Gray code.
+//  Hence these look-up tables. In addition, the upper nibble is used here for additional
+//  "negative" and "fractional value" flags as required for some temperatures.
+// RAC-PT1411HWRU °C Temperatures (short codes)
+const std::vector<uint8_t> RAC_PT1411HWRU_TEMPERATURE_C{0x10, 0x00, 0x01, 0x03, 0x02, 0x06, 0x07, 0x05,
+                                                        0x04, 0x0C, 0x0D, 0x09, 0x08, 0x0A, 0x0B};
+// RAC-PT1411HWRU °F Temperatures (short codes)
+const std::vector<uint8_t> RAC_PT1411HWRU_TEMPERATURE_F{0x10, 0x30, 0x00, 0x20, 0x01, 0x21, 0x03, 0x23, 0x02,
+                                                        0x22, 0x06, 0x26, 0x07, 0x05, 0x25, 0x04, 0x24, 0x0C,
+                                                        0x2C, 0x0D, 0x2D, 0x09, 0x08, 0x28, 0x0A, 0x2A, 0x0B};
+
+void ToshibaClimate::setup() {
+  if (this->sensor_) {
+    this->sensor_->add_on_state_callback([this](float state) {
+      this->current_temperature = state;
+      this->transmit_rac_pt1411hwru_temp_();
+      // current temperature changed, publish state
+      this->publish_state();
+    });
+    this->current_temperature = this->sensor_->state;
+  } else
+    this->current_temperature = NAN;
+  // restore set points
+  auto restore = this->restore_state_();
+  if (restore.has_value()) {
+    restore->apply(this);
+  } else {
+    // restore from defaults
+    this->mode = climate::CLIMATE_MODE_OFF;
+    // initialize target temperature to some value so that it's not NAN
+    this->target_temperature =
+        roundf(clamp<float>(this->current_temperature, this->minimum_temperature_, this->maximum_temperature_));
+    this->fan_mode = climate::CLIMATE_FAN_AUTO;
+    this->swing_mode = climate::CLIMATE_SWING_OFF;
+  }
+  // Set supported modes & temperatures based on model
+  this->minimum_temperature_ = this->temperature_min_();
+  this->maximum_temperature_ = this->temperature_max_();
+  this->swing_modes_ = this->toshiba_swing_modes_();
+  // Never send nan to HA
+  if (std::isnan(this->target_temperature))
+    this->target_temperature = 24;
+}
+
+void ToshibaClimate::transmit_state() {
+  if (this->model_ == MODEL_RAC_PT1411HWRU_C || this->model_ == MODEL_RAC_PT1411HWRU_F) {
+    transmit_rac_pt1411hwru_();
+  } else {
+    transmit_generic_();
+  }
+}
+
+void ToshibaClimate::transmit_generic_() {
+  uint8_t message[16] = {0};
+  uint8_t message_length = 9;
+
+  // Header
+  message[0] = 0xf2;
+  message[1] = 0x0d;
+
+  // Message length
+  message[2] = message_length - 6;
+
+  // First checksum
+  message[3] = message[0] ^ message[1] ^ message[2];
+
+  // Command
+  message[4] = TOSHIBA_COMMAND_DEFAULT;
+
+  // Temperature
+  uint8_t temperature = static_cast<uint8_t>(
+      clamp<float>(this->target_temperature, TOSHIBA_GENERIC_TEMP_C_MIN, TOSHIBA_GENERIC_TEMP_C_MAX));
+  message[5] = (temperature - static_cast<uint8_t>(TOSHIBA_GENERIC_TEMP_C_MIN)) << 4;
+
+  // Mode and fan
+  uint8_t mode;
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_OFF:
+      mode = TOSHIBA_MODE_OFF;
+      break;
+
+    case climate::CLIMATE_MODE_HEAT:
+      mode = TOSHIBA_MODE_HEAT;
+      break;
+
+    case climate::CLIMATE_MODE_COOL:
+      mode = TOSHIBA_MODE_COOL;
+      break;
+
+    case climate::CLIMATE_MODE_DRY:
+      mode = TOSHIBA_MODE_DRY;
+      break;
+
+    case climate::CLIMATE_MODE_FAN_ONLY:
+      mode = TOSHIBA_MODE_FAN_ONLY;
+      break;
+
+    case climate::CLIMATE_MODE_HEAT_COOL:
+    default:
+      mode = TOSHIBA_MODE_AUTO;
+  }
+
+  uint8_t fan;
+  switch (this->fan_mode.value()) {
+    case climate::CLIMATE_FAN_QUIET:
+      fan = TOSHIBA_FAN_SPEED_QUIET;
+      break;
+
+    case climate::CLIMATE_FAN_LOW:
+      fan = TOSHIBA_FAN_SPEED_1;
+      break;
+
+    case climate::CLIMATE_FAN_MEDIUM:
+      fan = TOSHIBA_FAN_SPEED_3;
+      break;
+
+    case climate::CLIMATE_FAN_HIGH:
+      fan = TOSHIBA_FAN_SPEED_5;
+      break;
+
+    case climate::CLIMATE_FAN_AUTO:
+    default:
+      fan = TOSHIBA_FAN_SPEED_AUTO;
+      break;
+  }
+  message[6] = fan | mode;
+
+  // Zero
+  message[7] = 0x00;
+
+  // If timers bit in the command is set, two extra bytes are added here
+
+  // If power bit is set in the command, one extra byte is added here
+
+  // The last byte is the xor of all bytes from [4]
+  for (uint8_t i = 4; i < 8; i++) {
+    message[8] ^= message[i];
+  }
+
+  // Transmit
+  auto transmit = this->transmitter_->transmit();
+  auto *data = transmit.get_data();
+
+  encode_(data, message, message_length, 1);
+
+  transmit.perform();
+}
+
+void ToshibaClimate::transmit_rac_pt1411hwru_() {
+  uint8_t code = 0, index = 0, message[RAC_PT1411HWRU_MESSAGE_LENGTH * 2] = {0};
+  float temperature =
+      clamp<float>(this->target_temperature, TOSHIBA_RAC_PT1411HWRU_TEMP_C_MIN, TOSHIBA_RAC_PT1411HWRU_TEMP_C_MAX);
+  float temp_adjd = temperature - TOSHIBA_RAC_PT1411HWRU_TEMP_C_MIN;
+  auto transmit = this->transmitter_->transmit();
+  auto *data = transmit.get_data();
+
+  // Byte 0:  Header upper (0xB2)
+  message[0] = RAC_PT1411HWRU_MESSAGE_HEADER0;
+  // Byte 1:  Header lower (0x4D)
+  message[1] = ~message[0];
+  // Byte 2u: Fan speed
+  // Byte 2l: 1111 (on) or 1011 (off)
+  if (this->mode == climate::CLIMATE_MODE_OFF) {
+    message[2] = RAC_PT1411HWRU_FAN_OFF;
+  } else if ((this->mode == climate::CLIMATE_MODE_HEAT_COOL) || (this->mode == climate::CLIMATE_MODE_DRY)) {
+    message[2] = RAC_PT1411HWRU_NO_FAN.code1;
+    message[7] = RAC_PT1411HWRU_NO_FAN.code2;
+  } else {
+    switch (this->fan_mode.value()) {
+      case climate::CLIMATE_FAN_LOW:
+        message[2] = RAC_PT1411HWRU_FAN_LOW.code1;
+        message[7] = RAC_PT1411HWRU_FAN_LOW.code2;
+        break;
+
+      case climate::CLIMATE_FAN_MEDIUM:
+        message[2] = RAC_PT1411HWRU_FAN_MED.code1;
+        message[7] = RAC_PT1411HWRU_FAN_MED.code2;
+        break;
+
+      case climate::CLIMATE_FAN_HIGH:
+        message[2] = RAC_PT1411HWRU_FAN_HIGH.code1;
+        message[7] = RAC_PT1411HWRU_FAN_HIGH.code2;
+        break;
+
+      case climate::CLIMATE_FAN_AUTO:
+      default:
+        message[2] = RAC_PT1411HWRU_FAN_AUTO.code1;
+        message[7] = RAC_PT1411HWRU_FAN_AUTO.code2;
+    }
+  }
+  // Byte 3u: ~Fan speed
+  // Byte 3l: 0000 (on) or 0100 (off)
+  message[3] = ~message[2];
+  // Byte 4u: Temp
+  if (this->model_ == MODEL_RAC_PT1411HWRU_F) {
+    temperature = (temperature * 1.8) + 32;
+    temp_adjd = temperature - TOSHIBA_RAC_PT1411HWRU_TEMP_F_MIN;
+  }
+
+  index = static_cast<uint8_t>(roundf(temp_adjd));
+
+  if (this->model_ == MODEL_RAC_PT1411HWRU_F) {
+    code = RAC_PT1411HWRU_TEMPERATURE_F[index];
+    message[9] |= RAC_PT1411HWRU_FLAG_FAH;
+  } else {
+    code = RAC_PT1411HWRU_TEMPERATURE_C[index];
+  }
+  if ((this->mode == climate::CLIMATE_MODE_FAN_ONLY) || (this->mode == climate::CLIMATE_MODE_OFF)) {
+    code = RAC_PT1411HWRU_TEMPERATURE_FAN_ONLY;
+  }
+
+  if (code & RAC_PT1411HWRU_FLAG_FRAC) {
+    message[8] |= RAC_PT1411HWRU_FLAG_FRAC;
+  }
+  if (code & RAC_PT1411HWRU_FLAG_NEG) {
+    message[9] |= RAC_PT1411HWRU_FLAG_NEG;
+  }
+  message[4] = (code & RAC_PT1411HWRU_FLAG_MASK) << 4;
+  // Byte 4l: Mode
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_OFF:
+      // zerooooo
+      break;
+
+    case climate::CLIMATE_MODE_HEAT:
+      message[4] |= RAC_PT1411HWRU_MODE_HEAT;
+      break;
+
+    case climate::CLIMATE_MODE_COOL:
+      message[4] |= RAC_PT1411HWRU_MODE_COOL;
+      break;
+
+    case climate::CLIMATE_MODE_DRY:
+      message[4] |= RAC_PT1411HWRU_MODE_DRY;
+      break;
+
+    case climate::CLIMATE_MODE_FAN_ONLY:
+      message[4] |= RAC_PT1411HWRU_MODE_FAN;
+      break;
+
+    case climate::CLIMATE_MODE_HEAT_COOL:
+    default:
+      message[4] |= RAC_PT1411HWRU_MODE_AUTO;
+  }
+
+  // Byte 5u: ~Temp
+  // Byte 5l: ~Mode
+  message[5] = ~message[4];
+
+  if (this->mode != climate::CLIMATE_MODE_OFF) {
+    // Byte 6:  Header (0xD5)
+    message[6] = RAC_PT1411HWRU_MESSAGE_HEADER1;
+    // Byte 7:  Fan speed part 2 (done above)
+    // Byte 8: 0x20 for °F frac, else 0 (done above)
+    // Byte 9: 0x10=NEG, 0x01=°F (done above)
+    // Byte 10: 0
+    // Byte 11: Checksum (bytes 6 through 10)
+    for (index = 6; index <= 10; index++) {
+      message[11] += message[index];
+    }
+  }
+  ESP_LOGV(TAG, "*** Generated codes: 0x%.2X%.2X%.2X%.2X%.2X%.2X  0x%.2X%.2X%.2X%.2X%.2X%.2X", message[0], message[1],
+           message[2], message[3], message[4], message[5], message[6], message[7], message[8], message[9], message[10],
+           message[11]);
+
+  // load first block of IR code and repeat it once
+  encode_(data, &message[0], RAC_PT1411HWRU_MESSAGE_LENGTH, 1);
+  // load second block of IR code, if present
+  if (message[6] != 0) {
+    encode_(data, &message[6], RAC_PT1411HWRU_MESSAGE_LENGTH, 0);
+  }
+
+  transmit.perform();
+
+  // Swing Mode
+  data->reset();
+  data->space(TOSHIBA_PACKET_SPACE);
+  switch (this->swing_mode) {
+    case climate::CLIMATE_SWING_VERTICAL:
+      encode_(data, &RAC_PT1411HWRU_SWING_VERTICAL[0], RAC_PT1411HWRU_MESSAGE_LENGTH, 1);
+      break;
+
+    case climate::CLIMATE_SWING_OFF:
+    default:
+      encode_(data, &RAC_PT1411HWRU_SWING_OFF[0], RAC_PT1411HWRU_MESSAGE_LENGTH, 1);
+  }
+
+  data->space(TOSHIBA_PACKET_SPACE);
+  transmit.perform();
+
+  if (this->sensor_) {
+    transmit_rac_pt1411hwru_temp_(true, false);
+  }
+}
+
+void ToshibaClimate::transmit_rac_pt1411hwru_temp_(const bool cs_state, const bool cs_send_update) {
+  if ((this->mode == climate::CLIMATE_MODE_HEAT) || (this->mode == climate::CLIMATE_MODE_COOL) ||
+      (this->mode == climate::CLIMATE_MODE_HEAT_COOL)) {
+    uint8_t message[RAC_PT1411HWRU_MESSAGE_LENGTH] = {0};
+    float temperature = clamp<float>(this->current_temperature, 0.0, TOSHIBA_RAC_PT1411HWRU_TEMP_C_MAX + 1);
+    auto transmit = this->transmitter_->transmit();
+    auto *data = transmit.get_data();
+    // "Comfort Sense" feature notes
+    // IR Code: 0xBA45 xxXX yyYY
+    // xx: Temperature in °C
+    //     Bit 6: feature state (on/off)
+    //     Bit 7: message contains temperature data for feature (bit 6 must also be set)
+    // XX: Bitwise complement of xx
+    // yy: Mode: Auto=0x7A, Cool=0x72, Heat=0x7E
+    // YY: Bitwise complement of yy
+    //
+    // Byte 0:  Header upper (0xBA)
+    message[0] = RAC_PT1411HWRU_CS_HEADER;
+    // Byte 1:  Header lower (0x45)
+    message[1] = ~message[0];
+    // Byte 2: Temperature in °C
+    message[2] = static_cast<uint8_t>(roundf(temperature));
+    if (cs_send_update) {
+      message[2] |= RAC_PT1411HWRU_CS_ENABLED | RAC_PT1411HWRU_CS_DATA;
+    } else if (cs_state) {
+      message[2] |= RAC_PT1411HWRU_CS_ENABLED;
+    }
+    // Byte 3: Bitwise complement of byte 2
+    message[3] = ~message[2];
+    // Byte 4: Footer upper
+    switch (this->mode) {
+      case climate::CLIMATE_MODE_HEAT:
+        message[4] = RAC_PT1411HWRU_CS_FOOTER_HEAT;
+        break;
+
+      case climate::CLIMATE_MODE_COOL:
+        message[4] = RAC_PT1411HWRU_CS_FOOTER_COOL;
+        break;
+
+      case climate::CLIMATE_MODE_HEAT_COOL:
+        message[4] = RAC_PT1411HWRU_CS_FOOTER_AUTO;
+
+      default:
+        break;
+    }
+    // Byte 5: Footer lower/bitwise complement of byte 4
+    message[5] = ~message[4];
+
+    ESP_LOGV(TAG, "*** Generated code: 0x%.2X%.2X%.2X%.2X%.2X%.2X", message[0], message[1], message[2], message[3],
+             message[4], message[5]);
+    // load IR code and repeat it once
+    encode_(data, message, RAC_PT1411HWRU_MESSAGE_LENGTH, 1);
+
+    transmit.perform();
+  }
+}
+
+uint8_t ToshibaClimate::is_valid_rac_pt1411hwru_header_(const uint8_t *message) {
+  const std::vector<uint8_t> header{RAC_PT1411HWRU_MESSAGE_HEADER0, RAC_PT1411HWRU_CS_HEADER,
+                                    RAC_PT1411HWRU_SWING_HEADER};
+
+  for (auto i : header) {
+    if ((message[0] == i) && (message[1] == static_cast<uint8_t>(~i)))
+      return i;
+  }
+  if (message[0] == RAC_PT1411HWRU_MESSAGE_HEADER1)
+    return RAC_PT1411HWRU_MESSAGE_HEADER1;
+
+  return 0;
+}
+
+bool ToshibaClimate::compare_rac_pt1411hwru_packets_(const uint8_t *message1, const uint8_t *message2) {
+  for (uint8_t i = 0; i < RAC_PT1411HWRU_MESSAGE_LENGTH; i++) {
+    if (message1[i] != message2[i])
+      return false;
+  }
+  return true;
+}
+
+bool ToshibaClimate::is_valid_rac_pt1411hwru_message_(const uint8_t *message) {
+  uint8_t checksum = 0;
+
+  switch (is_valid_rac_pt1411hwru_header_(message)) {
+    case RAC_PT1411HWRU_MESSAGE_HEADER0:
+    case RAC_PT1411HWRU_CS_HEADER:
+    case RAC_PT1411HWRU_SWING_HEADER:
+      if (is_valid_rac_pt1411hwru_header_(message) && (message[2] == static_cast<uint8_t>(~message[3])) &&
+          (message[4] == static_cast<uint8_t>(~message[5]))) {
+        return true;
+      }
+      break;
+
+    case RAC_PT1411HWRU_MESSAGE_HEADER1:
+      for (uint8_t i = 0; i < RAC_PT1411HWRU_MESSAGE_LENGTH - 1; i++) {
+        checksum += message[i];
+      }
+      if (checksum == message[RAC_PT1411HWRU_MESSAGE_LENGTH - 1]) {
+        return true;
+      }
+      break;
+
+    default:
+      return false;
+  }
+
+  return false;
+}
+
+bool ToshibaClimate::on_receive(remote_base::RemoteReceiveData data) {
+  uint8_t message[18] = {0};
+  uint8_t message_length = TOSHIBA_HEADER_LENGTH, temperature_code = 0;
+
+  // Validate header
+  if (!data.expect_item(TOSHIBA_HEADER_MARK, TOSHIBA_HEADER_SPACE)) {
+    return false;
+  }
+  // Read incoming bits into buffer
+  if (!decode_(&data, message, message_length)) {
+    return false;
+  }
+  // Determine incoming message protocol version and/or length
+  if (is_valid_rac_pt1411hwru_header_(message)) {
+    // We already received four bytes
+    message_length = RAC_PT1411HWRU_MESSAGE_LENGTH - 4;
+  } else if ((message[0] ^ message[1] ^ message[2]) != message[3]) {
+    // Return false if first checksum was not valid
+    return false;
+  } else {
+    // First checksum was valid so continue receiving the remaining bits
+    message_length = message[2] + 2;
+  }
+  // Decode the remaining bytes
+  if (!decode_(&data, &message[4], message_length)) {
+    return false;
+  }
+  // If this is a RAC-PT1411HWRU message, we expect the first packet a second time and also possibly a third packet
+  if (is_valid_rac_pt1411hwru_header_(message)) {
+    // There is always a space between packets
+    if (!data.expect_item(TOSHIBA_BIT_MARK, TOSHIBA_GAP_SPACE)) {
+      return false;
+    }
+    // Validate header 2
+    if (!data.expect_item(TOSHIBA_HEADER_MARK, TOSHIBA_HEADER_SPACE)) {
+      return false;
+    }
+    if (!decode_(&data, &message[6], RAC_PT1411HWRU_MESSAGE_LENGTH)) {
+      return false;
+    }
+    // If this is a RAC-PT1411HWRU message, there may also be a third packet.
+    // We do not fail the receive if we don't get this; it isn't always present
+    if (data.expect_item(TOSHIBA_BIT_MARK, TOSHIBA_GAP_SPACE)) {
+      // Validate header 3
+      data.expect_item(TOSHIBA_HEADER_MARK, TOSHIBA_HEADER_SPACE);
+      if (decode_(&data, &message[12], RAC_PT1411HWRU_MESSAGE_LENGTH)) {
+        if (!is_valid_rac_pt1411hwru_message_(&message[12])) {
+          // If a third packet was received but the checksum is not valid, fail
+          return false;
+        }
+      }
+    }
+    if (!compare_rac_pt1411hwru_packets_(&message[0], &message[6])) {
+      // If the first two packets don't match each other, fail
+      return false;
+    }
+    if (!is_valid_rac_pt1411hwru_message_(&message[0])) {
+      // If the first packet isn't valid, fail
+      return false;
+    }
+  }
+
+  // Header has been verified, now determine protocol version and set the climate component properties
+  switch (is_valid_rac_pt1411hwru_header_(message)) {
+    // Power, temperature, mode, fan speed
+    case RAC_PT1411HWRU_MESSAGE_HEADER0:
+      // Get the mode
+      switch (message[4] & 0x0F) {
+        case RAC_PT1411HWRU_MODE_AUTO:
+          this->mode = climate::CLIMATE_MODE_HEAT_COOL;
+          break;
+
+        // case RAC_PT1411HWRU_MODE_OFF:
+        case RAC_PT1411HWRU_MODE_COOL:
+          if (((message[4] >> 4) == RAC_PT1411HWRU_TEMPERATURE_FAN_ONLY) && (message[2] == RAC_PT1411HWRU_FAN_OFF)) {
+            this->mode = climate::CLIMATE_MODE_OFF;
+          } else {
+            this->mode = climate::CLIMATE_MODE_COOL;
+          }
+          break;
+
+        // case RAC_PT1411HWRU_MODE_DRY:
+        case RAC_PT1411HWRU_MODE_FAN:
+          if ((message[4] >> 4) == RAC_PT1411HWRU_TEMPERATURE_FAN_ONLY) {
+            this->mode = climate::CLIMATE_MODE_FAN_ONLY;
+          } else {
+            this->mode = climate::CLIMATE_MODE_DRY;
+          }
+          break;
+
+        case RAC_PT1411HWRU_MODE_HEAT:
+          this->mode = climate::CLIMATE_MODE_HEAT;
+          break;
+
+        default:
+          this->mode = climate::CLIMATE_MODE_OFF;
+          break;
+      }
+      // Get the fan speed/mode
+      switch (message[2]) {
+        case RAC_PT1411HWRU_FAN_LOW.code1:
+          this->fan_mode = climate::CLIMATE_FAN_LOW;
+          break;
+
+        case RAC_PT1411HWRU_FAN_MED.code1:
+          this->fan_mode = climate::CLIMATE_FAN_MEDIUM;
+          break;
+
+        case RAC_PT1411HWRU_FAN_HIGH.code1:
+          this->fan_mode = climate::CLIMATE_FAN_HIGH;
+          break;
+
+        case RAC_PT1411HWRU_FAN_AUTO.code1:
+        default:
+          this->fan_mode = climate::CLIMATE_FAN_AUTO;
+          break;
+      }
+      // Get the target temperature
+      if (is_valid_rac_pt1411hwru_message_(&message[12])) {
+        temperature_code =
+            (message[4] >> 4) | (message[14] & RAC_PT1411HWRU_FLAG_FRAC) | (message[15] & RAC_PT1411HWRU_FLAG_NEG);
+        if (message[15] & RAC_PT1411HWRU_FLAG_FAH) {
+          for (size_t i = 0; i < RAC_PT1411HWRU_TEMPERATURE_F.size(); i++) {
+            if (RAC_PT1411HWRU_TEMPERATURE_F[i] == temperature_code) {
+              this->target_temperature = static_cast<float>((i + TOSHIBA_RAC_PT1411HWRU_TEMP_F_MIN - 32) * 5) / 9;
+            }
+          }
+        } else {
+          for (size_t i = 0; i < RAC_PT1411HWRU_TEMPERATURE_C.size(); i++) {
+            if (RAC_PT1411HWRU_TEMPERATURE_C[i] == temperature_code) {
+              this->target_temperature = i + TOSHIBA_RAC_PT1411HWRU_TEMP_C_MIN;
+            }
+          }
+        }
+      }
+      break;
+    // "Comfort Sense" temperature packet
+    case RAC_PT1411HWRU_CS_HEADER:
+      // "Comfort Sense" feature notes
+      // IR Code: 0xBA45 xxXX yyYY
+      // xx: Temperature in °C
+      //     Bit 6: feature state (on/off)
+      //     Bit 7: message contains temperature data for feature (bit 6 must also be set)
+      // XX: Bitwise complement of xx
+      // yy: Mode: Auto: 7A
+      //           Cool: 72
+      //           Heat: 7E
+      // YY: Bitwise complement of yy
+      if ((message[2] & RAC_PT1411HWRU_CS_ENABLED) && (message[2] & RAC_PT1411HWRU_CS_DATA)) {
+        // Setting current_temperature this way allows the unit's remote to provide the temperature to HA
+        this->current_temperature = message[2] & ~(RAC_PT1411HWRU_CS_ENABLED | RAC_PT1411HWRU_CS_DATA);
+      }
+      break;
+    // Swing mode
+    case RAC_PT1411HWRU_SWING_HEADER:
+      if (message[4] == RAC_PT1411HWRU_SWING_VERTICAL[4]) {
+        this->swing_mode = climate::CLIMATE_SWING_VERTICAL;
+      } else {
+        this->swing_mode = climate::CLIMATE_SWING_OFF;
+      }
+      break;
+    // Generic (old) Toshiba packet
+    default:
+      uint8_t checksum = 0;
+      // Add back the length of the header (we pruned it above)
+      message_length += TOSHIBA_HEADER_LENGTH;
+      // Validate the second checksum before trusting any more of the message
+      for (uint8_t i = TOSHIBA_HEADER_LENGTH; i < message_length - 1; i++) {
+        checksum ^= message[i];
+      }
+      // Did our computed checksum and the provided checksum match?
+      if (checksum != message[message_length - 1]) {
+        return false;
+      }
+      // Check if this is a short swing/fix message
+      if (message[4] & TOSHIBA_COMMAND_MOTION) {
+        // Not supported yet
+        return false;
+      }
+
+      // Get the mode
+      switch (message[6] & 0x0F) {
+        case TOSHIBA_MODE_OFF:
+          this->mode = climate::CLIMATE_MODE_OFF;
+          break;
+
+        case TOSHIBA_MODE_COOL:
+          this->mode = climate::CLIMATE_MODE_COOL;
+          break;
+
+        case TOSHIBA_MODE_DRY:
+          this->mode = climate::CLIMATE_MODE_DRY;
+          break;
+
+        case TOSHIBA_MODE_FAN_ONLY:
+          this->mode = climate::CLIMATE_MODE_FAN_ONLY;
+          break;
+
+        case TOSHIBA_MODE_HEAT:
+          this->mode = climate::CLIMATE_MODE_HEAT;
+          break;
+
+        case TOSHIBA_MODE_AUTO:
+        default:
+          this->mode = climate::CLIMATE_MODE_HEAT_COOL;
+      }
+
+      // Get the fan mode
+      switch (message[6] & 0xF0) {
+        case TOSHIBA_FAN_SPEED_QUIET:
+          this->fan_mode = climate::CLIMATE_FAN_QUIET;
+          break;
+
+        case TOSHIBA_FAN_SPEED_1:
+          this->fan_mode = climate::CLIMATE_FAN_LOW;
+          break;
+
+        case TOSHIBA_FAN_SPEED_3:
+          this->fan_mode = climate::CLIMATE_FAN_MEDIUM;
+          break;
+
+        case TOSHIBA_FAN_SPEED_5:
+          this->fan_mode = climate::CLIMATE_FAN_HIGH;
+          break;
+
+        case TOSHIBA_FAN_SPEED_AUTO:
+        default:
+          this->fan_mode = climate::CLIMATE_FAN_AUTO;
+          break;
+      }
+
+      // Get the target temperature
+      this->target_temperature = (message[5] >> 4) + TOSHIBA_GENERIC_TEMP_C_MIN;
+  }
+
+  this->publish_state();
+  return true;
+}
+
+void ToshibaClimate::encode_(remote_base::RemoteTransmitData *data, const uint8_t *message, const uint8_t nbytes,
+                             const uint8_t repeat) {
+  data->set_carrier_frequency(TOSHIBA_CARRIER_FREQUENCY);
+
+  for (uint8_t copy = 0; copy <= repeat; copy++) {
+    data->item(TOSHIBA_HEADER_MARK, TOSHIBA_HEADER_SPACE);
+
+    for (uint8_t byte = 0; byte < nbytes; byte++) {
+      for (uint8_t bit = 0; bit < 8; bit++) {
+        data->mark(TOSHIBA_BIT_MARK);
+        if (message[byte] & (1 << (7 - bit))) {
+          data->space(TOSHIBA_ONE_SPACE);
+        } else {
+          data->space(TOSHIBA_ZERO_SPACE);
+        }
+      }
+    }
+    data->item(TOSHIBA_BIT_MARK, TOSHIBA_GAP_SPACE);
+  }
+}
+
+bool ToshibaClimate::decode_(remote_base::RemoteReceiveData *data, uint8_t *message, const uint8_t nbytes) {
+  for (uint8_t byte = 0; byte < nbytes; byte++) {
+    for (uint8_t bit = 0; bit < 8; bit++) {
+      if (data->expect_item(TOSHIBA_BIT_MARK, TOSHIBA_ONE_SPACE)) {
+        message[byte] |= 1 << (7 - bit);
+      } else if (data->expect_item(TOSHIBA_BIT_MARK, TOSHIBA_ZERO_SPACE)) {
+        message[byte] &= static_cast<uint8_t>(~(1 << (7 - bit)));
+      } else {
+        return false;
+      }
+    }
+  }
+  return true;
+}
+
+}  // namespace toshiba
+}  // namespace esphome