esphome 2024.12.3__py3-none-any.whl

esphome/components/hx711/hx711.cpp

@@ -0,0 +1,83 @@
+#include "hx711.h"
+#include "esphome/core/log.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace hx711 {
+
+static const char *const TAG = "hx711";
+
+void HX711Sensor::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up HX711 '%s'...", this->name_.c_str());
+  this->sck_pin_->setup();
+  this->dout_pin_->setup();
+  this->sck_pin_->digital_write(false);
+
+  // Read sensor once without publishing to set the gain
+  this->read_sensor_(nullptr);
+}
+
+void HX711Sensor::dump_config() {
+  LOG_SENSOR("", "HX711", this);
+  LOG_PIN("  DOUT Pin: ", this->dout_pin_);
+  LOG_PIN("  SCK Pin: ", this->sck_pin_);
+  LOG_UPDATE_INTERVAL(this);
+}
+float HX711Sensor::get_setup_priority() const { return setup_priority::DATA; }
+void HX711Sensor::update() {
+  uint32_t result;
+  if (this->read_sensor_(&result)) {
+    int32_t value = static_cast<int32_t>(result);
+    ESP_LOGD(TAG, "'%s': Got value %" PRId32, this->name_.c_str(), value);
+    this->publish_state(value);
+  }
+}
+bool HX711Sensor::read_sensor_(uint32_t *result) {
+  if (this->dout_pin_->digital_read()) {
+    ESP_LOGW(TAG, "HX711 is not ready for new measurements yet!");
+    this->status_set_warning();
+    return false;
+  }
+
+  uint32_t data = 0;
+  bool final_dout;
+
+  {
+    InterruptLock lock;
+    for (uint8_t i = 0; i < 24; i++) {
+      this->sck_pin_->digital_write(true);
+      delayMicroseconds(1);
+      data |= uint32_t(this->dout_pin_->digital_read()) << (23 - i);
+      this->sck_pin_->digital_write(false);
+      delayMicroseconds(1);
+    }
+
+    // Cycle clock pin for gain setting
+    for (uint8_t i = 0; i < static_cast<uint8_t>(this->gain_); i++) {
+      this->sck_pin_->digital_write(true);
+      delayMicroseconds(1);
+      this->sck_pin_->digital_write(false);
+      delayMicroseconds(1);
+    }
+    final_dout = this->dout_pin_->digital_read();
+  }
+
+  if (!final_dout) {
+    ESP_LOGW(TAG, "HX711 DOUT pin not high after reading (data 0x%" PRIx32 ")!", data);
+    this->status_set_warning();
+    return false;
+  }
+
+  this->status_clear_warning();
+
+  if (data & 0x800000ULL) {
+    data |= 0xFF000000ULL;
+  }
+
+  if (result != nullptr)
+    *result = data;
+  return true;
+}
+
+}  // namespace hx711
+}  // namespace esphome

esphome/components/hx711/hx711.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/sensor/sensor.h"
+
+#include <cinttypes>
+
+namespace esphome {
+namespace hx711 {
+
+enum HX711Gain : uint8_t {
+  HX711_GAIN_128 = 1,
+  HX711_GAIN_32 = 2,
+  HX711_GAIN_64 = 3,
+};
+
+class HX711Sensor : public sensor::Sensor, public PollingComponent {
+ public:
+  void set_dout_pin(GPIOPin *dout_pin) { dout_pin_ = dout_pin; }
+  void set_sck_pin(GPIOPin *sck_pin) { sck_pin_ = sck_pin; }
+  void set_gain(HX711Gain gain) { gain_ = gain; }
+
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override;
+  void update() override;
+
+ protected:
+  bool read_sensor_(uint32_t *result);
+
+  GPIOPin *dout_pin_;
+  GPIOPin *sck_pin_;
+  HX711Gain gain_{HX711_GAIN_128};
+};
+
+}  // namespace hx711
+}  // namespace esphome

esphome/components/hx711/sensor.py

@@ -0,0 +1,50 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome import pins
+from esphome.components import sensor
+from esphome.const import (
+    CONF_CLK_PIN,
+    CONF_GAIN,
+    ICON_SCALE,
+    STATE_CLASS_MEASUREMENT,
+)
+
+hx711_ns = cg.esphome_ns.namespace("hx711")
+HX711Sensor = hx711_ns.class_("HX711Sensor", sensor.Sensor, cg.PollingComponent)
+
+CONF_DOUT_PIN = "dout_pin"
+
+HX711Gain = hx711_ns.enum("HX711Gain")
+GAINS = {
+    128: HX711Gain.HX711_GAIN_128,
+    32: HX711Gain.HX711_GAIN_32,
+    64: HX711Gain.HX711_GAIN_64,
+}
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        HX711Sensor,
+        icon=ICON_SCALE,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(
+        {
+            cv.Required(CONF_DOUT_PIN): pins.gpio_input_pin_schema,
+            cv.Required(CONF_CLK_PIN): pins.gpio_output_pin_schema,
+            cv.Optional(CONF_GAIN, default=128): cv.enum(GAINS, int=True),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+
+    dout_pin = await cg.gpio_pin_expression(config[CONF_DOUT_PIN])
+    cg.add(var.set_dout_pin(dout_pin))
+    sck_pin = await cg.gpio_pin_expression(config[CONF_CLK_PIN])
+    cg.add(var.set_sck_pin(sck_pin))
+    cg.add(var.set_gain(config[CONF_GAIN]))

esphome/components/hydreon_rgxx/__init__.py

@@ -0,0 +1,12 @@
+import esphome.codegen as cg
+from esphome.components import uart
+
+CODEOWNERS = ["@functionpointer"]
+DEPENDENCIES = ["uart"]
+
+hydreon_rgxx_ns = cg.esphome_ns.namespace("hydreon_rgxx")
+RGModel = hydreon_rgxx_ns.enum("RGModel")
+RG15Resolution = hydreon_rgxx_ns.enum("RG15Resolution")
+HydreonRGxxComponent = hydreon_rgxx_ns.class_(
+    "HydreonRGxxComponent", cg.PollingComponent, uart.UARTDevice
+)

esphome/components/hydreon_rgxx/binary_sensor.py

@@ -0,0 +1,53 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import binary_sensor
+from esphome.const import (
+    CONF_ID,
+    DEVICE_CLASS_COLD,
+    DEVICE_CLASS_PROBLEM,
+)
+
+from . import hydreon_rgxx_ns, HydreonRGxxComponent
+
+CONF_HYDREON_RGXX_ID = "hydreon_rgxx_id"
+CONF_TOO_COLD = "too_cold"
+CONF_LENS_BAD = "lens_bad"
+CONF_EM_SAT = "em_sat"
+
+HydreonRGxxBinarySensor = hydreon_rgxx_ns.class_(
+    "HydreonRGxxBinaryComponent", cg.Component
+)
+
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(HydreonRGxxBinarySensor),
+        cv.GenerateID(CONF_HYDREON_RGXX_ID): cv.use_id(HydreonRGxxComponent),
+        cv.Optional(CONF_TOO_COLD): binary_sensor.binary_sensor_schema(
+            device_class=DEVICE_CLASS_COLD
+        ),
+        cv.Optional(CONF_LENS_BAD): binary_sensor.binary_sensor_schema(
+            device_class=DEVICE_CLASS_PROBLEM,
+        ),
+        cv.Optional(CONF_EM_SAT): binary_sensor.binary_sensor_schema(
+            device_class=DEVICE_CLASS_PROBLEM,
+        ),
+    }
+)
+
+
+async def to_code(config):
+    main_sensor = await cg.get_variable(config[CONF_HYDREON_RGXX_ID])
+    bin_component = cg.new_Pvariable(config[CONF_ID], main_sensor)
+    await cg.register_component(bin_component, config)
+
+    mapping = {
+        CONF_TOO_COLD: main_sensor.set_too_cold_sensor,
+        CONF_LENS_BAD: main_sensor.set_lens_bad_sensor,
+        CONF_EM_SAT: main_sensor.set_em_sat_sensor,
+    }
+
+    for key, value in mapping.items():
+        if key in config:
+            sensor = await binary_sensor.new_binary_sensor(config[key])
+            cg.add(value(sensor))

esphome/components/hydreon_rgxx/hydreon_rgxx.cpp

@@ -0,0 +1,295 @@
+#include "hydreon_rgxx.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace hydreon_rgxx {
+
+static const char *const TAG = "hydreon_rgxx.sensor";
+static const int MAX_DATA_LENGTH_BYTES = 80;
+static const uint8_t ASCII_LF = 0x0A;
+#define HYDREON_RGXX_COMMA ,
+static const char *const PROTOCOL_NAMES[] = {HYDREON_RGXX_PROTOCOL_LIST(, HYDREON_RGXX_COMMA)};
+static const char *const IGNORE_STRINGS[] = {HYDREON_RGXX_IGNORE_LIST(, HYDREON_RGXX_COMMA)};
+
+void HydreonRGxxComponent::dump_config() {
+  this->check_uart_settings(9600, 1, esphome::uart::UART_CONFIG_PARITY_NONE, 8);
+  ESP_LOGCONFIG(TAG, "hydreon_rgxx:");
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Connection with hydreon_rgxx failed!");
+  }
+  if (model_ == RG9) {
+    ESP_LOGCONFIG(TAG, "  Model: RG9");
+    ESP_LOGCONFIG(TAG, "  Disable Led: %s", TRUEFALSE(this->disable_led_));
+  } else {
+    ESP_LOGCONFIG(TAG, "  Model: RG15");
+    if (this->resolution_ == FORCE_HIGH) {
+      ESP_LOGCONFIG(TAG, "  Resolution: high");
+    } else {
+      ESP_LOGCONFIG(TAG, "  Resolution: low");
+    }
+  }
+  LOG_UPDATE_INTERVAL(this);
+
+  int i = 0;
+#define HYDREON_RGXX_LOG_SENSOR(s) \
+  if (this->sensors_[i++] != nullptr) { \
+    LOG_SENSOR("  ", #s, this->sensors_[i - 1]); \
+  }
+  HYDREON_RGXX_PROTOCOL_LIST(HYDREON_RGXX_LOG_SENSOR, );
+}
+
+void HydreonRGxxComponent::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up hydreon_rgxx...");
+  while (this->available() != 0) {
+    this->read();
+  }
+  this->schedule_reboot_();
+}
+
+int HydreonRGxxComponent::num_sensors_missing_() {
+  if (this->sensors_received_ == -1) {
+    return -1;
+  }
+  int ret = NUM_SENSORS;
+  for (int i = 0; i < NUM_SENSORS; i++) {
+    if (this->sensors_[i] == nullptr) {
+      ret -= 1;
+      continue;
+    }
+    if ((this->sensors_received_ >> i & 1) != 0) {
+      ret -= 1;
+    }
+  }
+  return ret;
+}
+
+void HydreonRGxxComponent::update() {
+  if (this->boot_count_ > 0) {
+    if (this->num_sensors_missing_() > 0) {
+      for (int i = 0; i < NUM_SENSORS; i++) {
+        if (this->sensors_[i] == nullptr) {
+          continue;
+        }
+        if ((this->sensors_received_ >> i & 1) == 0) {
+          ESP_LOGW(TAG, "Missing %s", PROTOCOL_NAMES[i]);
+        }
+      }
+
+      this->no_response_count_++;
+      ESP_LOGE(TAG, "missing %d sensors; %d times in a row", this->num_sensors_missing_(), this->no_response_count_);
+      if (this->no_response_count_ > 15) {
+        ESP_LOGE(TAG, "asking sensor to reboot");
+        for (auto &sensor : this->sensors_) {
+          if (sensor != nullptr) {
+            sensor->publish_state(NAN);
+          }
+        }
+        this->schedule_reboot_();
+        return;
+      }
+    } else {
+      this->no_response_count_ = 0;
+    }
+    this->write_str("R\n");
+#ifdef USE_BINARY_SENSOR
+    if (this->too_cold_sensor_ != nullptr) {
+      this->too_cold_sensor_->publish_state(this->too_cold_);
+    }
+    if (this->lens_bad_sensor_ != nullptr) {
+      this->lens_bad_sensor_->publish_state(this->lens_bad_);
+    }
+    if (this->em_sat_sensor_ != nullptr) {
+      this->em_sat_sensor_->publish_state(this->em_sat_);
+    }
+#endif
+    this->too_cold_ = false;
+    this->lens_bad_ = false;
+    this->em_sat_ = false;
+    this->sensors_received_ = 0;
+  }
+}
+
+void HydreonRGxxComponent::loop() {
+  uint8_t data;
+  while (this->available() > 0) {
+    if (this->read_byte(&data)) {
+      buffer_ += (char) data;
+      if (this->buffer_.back() == static_cast<char>(ASCII_LF) || this->buffer_.length() >= MAX_DATA_LENGTH_BYTES) {
+        // complete line received
+        this->process_line_();
+        this->buffer_.clear();
+      }
+    }
+  }
+}
+
+/**
+ * Communication with the sensor is asynchronous.
+ * We send requests and let esphome continue doing its thing.
+ * Once we have received a complete line, we process it.
+ *
+ * Catching communication failures is done in two layers:
+ *
+ * 1. We check if all requested data has been received
+ *    before we send out the next request. If data keeps
+ *    missing, we escalate.
+ * 2. Request the sensor to reboot. We retry based on
+ *    a timeout. If the sensor does not respond after
+ *    several boot attempts, we give up.
+ */
+void HydreonRGxxComponent::schedule_reboot_() {
+  this->boot_count_ = 0;
+  this->set_interval("reboot", 5000, [this]() {
+    if (this->boot_count_ < 0) {
+      ESP_LOGW(TAG, "hydreon_rgxx failed to boot %d times", -this->boot_count_);
+    }
+    this->boot_count_--;
+    this->write_str("K\n");
+    if (this->boot_count_ < -5) {
+      ESP_LOGE(TAG, "hydreon_rgxx can't boot, giving up");
+      for (auto &sensor : this->sensors_) {
+        if (sensor != nullptr) {
+          sensor->publish_state(NAN);
+        }
+      }
+      this->mark_failed();
+    }
+  });
+}
+
+bool HydreonRGxxComponent::buffer_starts_with_(const std::string &prefix) {
+  return this->buffer_starts_with_(prefix.c_str());
+}
+
+bool HydreonRGxxComponent::buffer_starts_with_(const char *prefix) { return buffer_.rfind(prefix, 0) == 0; }
+
+void HydreonRGxxComponent::process_line_() {
+  ESP_LOGV(TAG, "Read from serial: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+
+  if (buffer_[0] == ';') {
+    ESP_LOGI(TAG, "Comment: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+    return;
+  }
+  std::string::size_type newlineposn = this->buffer_.find('\n');
+  if (newlineposn <= 1) {
+    // allow both \r\n and \n
+    ESP_LOGD(TAG, "Received empty line");
+    return;
+  }
+  if (newlineposn <= 2) {
+    // single character lines, such as acknowledgements
+    ESP_LOGD(TAG, "Received ack: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+    return;
+  }
+  if (this->buffer_.find("LensBad") != std::string::npos) {
+    ESP_LOGW(TAG, "Received LensBad!");
+    this->lens_bad_ = true;
+  }
+  if (this->buffer_.find("EmSat") != std::string::npos) {
+    ESP_LOGW(TAG, "Received EmSat!");
+    this->em_sat_ = true;
+  }
+  if (this->buffer_starts_with_("PwrDays")) {
+    if (this->boot_count_ <= 0) {
+      this->boot_count_ = 1;
+    } else {
+      this->boot_count_++;
+    }
+    this->cancel_interval("reboot");
+    this->no_response_count_ = 0;
+    ESP_LOGI(TAG, "Boot detected: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+
+    if (this->model_ == RG15) {
+      if (this->resolution_ == FORCE_HIGH) {
+        this->write_str("P\nH\nM\n");  // set sensor to (P)polling mode, (H)high res mode, (M)metric mode
+      } else {
+        this->write_str("P\nL\nM\n");  // set sensor to (P)polling mode, (L)low res mode, (M)metric mode
+      }
+    }
+
+    if (this->model_ == RG9) {
+      this->write_str("P\n");  // set sensor to (P)polling mode
+
+      if (this->disable_led_) {
+        this->write_str("D 1\n");  // set sensor (D 1)rain detection LED disabled
+      } else {
+        this->write_str("D 0\n");  // set sensor (D 0)rain detection LED enabled
+      }
+    }
+    return;
+  }
+  if (this->buffer_starts_with_("SW")) {
+    std::string::size_type majend = this->buffer_.find('.');
+    std::string::size_type endversion = this->buffer_.find(' ', 3);
+    if (majend == std::string::npos || endversion == std::string::npos || majend > endversion) {
+      ESP_LOGW(TAG, "invalid version string: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+    }
+    int major = strtol(this->buffer_.substr(3, majend - 3).c_str(), nullptr, 10);
+    int minor = strtol(this->buffer_.substr(majend + 1, endversion - (majend + 1)).c_str(), nullptr, 10);
+
+    if (major > 10 || minor >= 1000 || minor < 0 || major < 0) {
+      ESP_LOGW(TAG, "invalid version: %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+    }
+    this->sw_version_ = major * 1000 + minor;
+    ESP_LOGI(TAG, "detected sw version %i", this->sw_version_);
+    return;
+  }
+  bool is_data_line = false;
+  for (int i = 0; i < NUM_SENSORS; i++) {
+    if (this->sensors_[i] != nullptr && this->buffer_.find(PROTOCOL_NAMES[i]) != std::string::npos) {
+      is_data_line = true;
+      break;
+    }
+  }
+  if (is_data_line) {
+    std::string::size_type tc = this->buffer_.find("TooCold");
+    this->too_cold_ |= tc != std::string::npos;
+    if (this->too_cold_) {
+      ESP_LOGD(TAG, "Received TooCold");
+    }
+    for (int i = 0; i < NUM_SENSORS; i++) {
+      if (this->sensors_[i] == nullptr) {
+        continue;
+      }
+      std::string::size_type n = this->buffer_.find(PROTOCOL_NAMES[i]);
+      if (n == std::string::npos) {
+        continue;
+      }
+
+      if (n == this->buffer_.find('t', n)) {
+        // The device temperature ('t') response contains both °C and °F values:
+        // "t 72F 22C".
+        // ESPHome uses only °C, only parse °C value (move past 'F').
+        n = this->buffer_.find('F', n);
+        if (n == std::string::npos) {
+          continue;
+        }
+        n += 1;  // move past 'F'
+      } else {
+        n += strlen(PROTOCOL_NAMES[i]);  // move past protocol name
+      }
+
+      // parse value, starting at str position n
+      float data = strtof(this->buffer_.substr(n).c_str(), nullptr);
+      this->sensors_[i]->publish_state(data);
+      ESP_LOGD(TAG, "Received %s: %f", PROTOCOL_NAMES[i], this->sensors_[i]->get_raw_state());
+      this->sensors_received_ |= (1 << i);
+    }
+    if (this->request_temperature_ && this->num_sensors_missing_() == 1) {
+      this->write_str("T\n");
+    }
+  } else {
+    for (const auto *ignore : IGNORE_STRINGS) {
+      if (this->buffer_starts_with_(ignore)) {
+        ESP_LOGI(TAG, "Ignoring %s", this->buffer_.substr(0, this->buffer_.size() - 2).c_str());
+        return;
+      }
+    }
+    ESP_LOGI(TAG, "Got unknown line: %s", this->buffer_.c_str());
+  }
+}
+
+float HydreonRGxxComponent::get_setup_priority() const { return setup_priority::DATA; }
+
+}  // namespace hydreon_rgxx
+}  // namespace esphome

esphome/components/hydreon_rgxx/hydreon_rgxx.h

@@ -0,0 +1,98 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/components/sensor/sensor.h"
+#ifdef USE_BINARY_SENSOR
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#endif
+#include "esphome/components/uart/uart.h"
+
+namespace esphome {
+namespace hydreon_rgxx {
+
+enum RGModel {
+  RG9 = 1,
+  RG15 = 2,
+};
+
+enum RG15Resolution {
+  FORCE_LOW = 1,
+  FORCE_HIGH = 2,
+};
+
+#ifdef HYDREON_RGXX_NUM_SENSORS
+static const uint8_t NUM_SENSORS = HYDREON_RGXX_NUM_SENSORS;
+#else
+static const uint8_t NUM_SENSORS = 1;
+#endif
+
+#ifndef HYDREON_RGXX_PROTOCOL_LIST
+#define HYDREON_RGXX_PROTOCOL_LIST(F, SEP) F("")
+#endif
+
+#define HYDREON_RGXX_IGNORE_LIST(F, SEP) F("Emitters") SEP F("Event") SEP F("Reset")
+
+class HydreonRGxxComponent : public PollingComponent, public uart::UARTDevice {
+ public:
+  void set_sensor(sensor::Sensor *sensor, int index) { this->sensors_[index] = sensor; }
+#ifdef USE_BINARY_SENSOR
+  void set_too_cold_sensor(binary_sensor::BinarySensor *sensor) { this->too_cold_sensor_ = sensor; }
+  void set_lens_bad_sensor(binary_sensor::BinarySensor *sensor) { this->lens_bad_sensor_ = sensor; }
+  void set_em_sat_sensor(binary_sensor::BinarySensor *sensor) { this->em_sat_sensor_ = sensor; }
+#endif
+  void set_model(RGModel model) { model_ = model; }
+  void set_resolution(RG15Resolution resolution) { resolution_ = resolution; }
+  void set_request_temperature(bool b) { request_temperature_ = b; }
+
+  /// Schedule data readings.
+  void update() override;
+  /// Read data once available
+  void loop() override;
+  /// Setup the sensor and test for a connection.
+  void setup() override;
+  void dump_config() override;
+
+  float get_setup_priority() const override;
+
+  void set_disable_led(bool disable_led) { this->disable_led_ = disable_led; }
+
+ protected:
+  void process_line_();
+  void schedule_reboot_();
+  bool buffer_starts_with_(const std::string &prefix);
+  bool buffer_starts_with_(const char *prefix);
+  int num_sensors_missing_();
+
+  sensor::Sensor *sensors_[NUM_SENSORS] = {nullptr};
+#ifdef USE_BINARY_SENSOR
+  binary_sensor::BinarySensor *too_cold_sensor_{nullptr};
+  binary_sensor::BinarySensor *lens_bad_sensor_{nullptr};
+  binary_sensor::BinarySensor *em_sat_sensor_{nullptr};
+#endif
+
+  int16_t boot_count_ = 0;
+  int16_t no_response_count_ = 0;
+  std::string buffer_;
+
+  RGModel model_ = RG9;
+  RG15Resolution resolution_ = FORCE_HIGH;
+
+  int sw_version_ = 0;
+  bool too_cold_ = false;
+  bool lens_bad_ = false;
+  bool em_sat_ = false;
+  bool request_temperature_ = false;
+  bool disable_led_ = false;
+
+  // bit field showing which sensors we have received data for
+  int sensors_received_ = -1;
+};
+
+class HydreonRGxxBinaryComponent : public Component {
+ public:
+  HydreonRGxxBinaryComponent(HydreonRGxxComponent *parent) {}
+};
+
+}  // namespace hydreon_rgxx
+}  // namespace esphome