esphome 2024.12.3__py3-none-any.whl

esphome/components/nextion/nextion.cpp

@@ -0,0 +1,1172 @@
+#include "nextion.h"
+#include "esphome/core/util.h"
+#include "esphome/core/log.h"
+#include "esphome/core/application.h"
+#include <cinttypes>
+
+namespace esphome {
+namespace nextion {
+
+static const char *const TAG = "nextion";
+
+void Nextion::setup() {
+  this->is_setup_ = false;
+  this->ignore_is_setup_ = true;
+
+  // Wake up the nextion
+  this->send_command_("bkcmd=0");
+  this->send_command_("sleep=0");
+
+  this->send_command_("bkcmd=0");
+  this->send_command_("sleep=0");
+
+  // Reboot it
+  this->send_command_("rest");
+
+  this->ignore_is_setup_ = false;
+}
+
+bool Nextion::send_command_(const std::string &command) {
+  if (!this->ignore_is_setup_ && !this->is_setup()) {
+    return false;
+  }
+
+  ESP_LOGN(TAG, "send_command %s", command.c_str());
+
+  this->write_str(command.c_str());
+  const uint8_t to_send[3] = {0xFF, 0xFF, 0xFF};
+  this->write_array(to_send, sizeof(to_send));
+  return true;
+}
+
+bool Nextion::check_connect_() {
+  if (this->get_is_connected_())
+    return true;
+
+  // Check if the handshake should be skipped for the Nextion connection
+  if (this->skip_connection_handshake_) {
+    // Log the connection status without handshake
+    ESP_LOGW(TAG, "Nextion display set as connected without performing handshake");
+    // Set the connection status to true
+    this->is_connected_ = true;
+    // Return true indicating the connection is set
+    return true;
+  }
+
+  if (this->comok_sent_ == 0) {
+    this->reset_(false);
+
+    this->ignore_is_setup_ = true;
+    this->send_command_("boguscommand=0");  // bogus command. needed sometimes after updating
+    if (this->exit_reparse_on_start_) {
+      this->send_command_("DRAKJHSUYDGBNCJHGJKSHBDN");
+    }
+    this->send_command_("connect");
+
+    this->comok_sent_ = millis();
+    this->ignore_is_setup_ = false;
+
+    return false;
+  }
+
+  if (millis() - this->comok_sent_ <= 500)  // Wait 500 ms
+    return false;
+
+  std::string response;
+
+  this->recv_ret_string_(response, 0, false);
+  if (!response.empty() && response[0] == 0x1A) {
+    // Swallow invalid variable name responses that may be caused by the above commands
+    ESP_LOGD(TAG, "0x1A error ignored during setup");
+    return false;
+  }
+  if (response.empty() || response.find("comok") == std::string::npos) {
+#ifdef NEXTION_PROTOCOL_LOG
+    ESP_LOGN(TAG, "Bad connect request %s", response.c_str());
+    for (size_t i = 0; i < response.length(); i++) {
+      ESP_LOGN(TAG, "response %s %d %d %c", response.c_str(), i, response[i], response[i]);
+    }
+#endif
+
+    ESP_LOGW(TAG, "Nextion is not connected! ");
+    comok_sent_ = 0;
+    return false;
+  }
+
+  this->ignore_is_setup_ = true;
+  ESP_LOGI(TAG, "Nextion is connected");
+  this->is_connected_ = true;
+
+  ESP_LOGN(TAG, "connect request %s", response.c_str());
+
+  size_t start;
+  size_t end = 0;
+  std::vector<std::string> connect_info;
+  while ((start = response.find_first_not_of(',', end)) != std::string::npos) {
+    end = response.find(',', start);
+    connect_info.push_back(response.substr(start, end - start));
+  }
+
+  this->is_detected_ = (connect_info.size() == 7);
+  if (this->is_detected_) {
+    ESP_LOGN(TAG, "Received connect_info %zu", connect_info.size());
+
+    this->device_model_ = connect_info[2];
+    this->firmware_version_ = connect_info[3];
+    this->serial_number_ = connect_info[5];
+    this->flash_size_ = connect_info[6];
+  } else {
+    ESP_LOGE(TAG, "Nextion returned bad connect value \"%s\"", response.c_str());
+  }
+
+  this->ignore_is_setup_ = false;
+  this->dump_config();
+  return true;
+}
+
+void Nextion::reset_(bool reset_nextion) {
+  uint8_t d;
+
+  while (this->available()) {  // Clear receive buffer
+    this->read_byte(&d);
+  };
+  this->nextion_queue_.clear();
+  this->waveform_queue_.clear();
+}
+
+void Nextion::dump_config() {
+  ESP_LOGCONFIG(TAG, "Nextion:");
+  if (this->skip_connection_handshake_) {
+    ESP_LOGCONFIG(TAG, "  Skip handshake:   %s", YESNO(this->skip_connection_handshake_));
+  } else {
+    ESP_LOGCONFIG(TAG, "  Device Model:     %s", this->device_model_.c_str());
+    ESP_LOGCONFIG(TAG, "  Firmware Version: %s", this->firmware_version_.c_str());
+    ESP_LOGCONFIG(TAG, "  Serial Number:    %s", this->serial_number_.c_str());
+    ESP_LOGCONFIG(TAG, "  Flash Size:       %s", this->flash_size_.c_str());
+  }
+  ESP_LOGCONFIG(TAG, "  Wake On Touch:    %s", YESNO(this->auto_wake_on_touch_));
+  ESP_LOGCONFIG(TAG, "  Exit reparse:     %s", YESNO(this->exit_reparse_on_start_));
+
+  if (this->touch_sleep_timeout_ != 0) {
+    ESP_LOGCONFIG(TAG, "  Touch Timeout:    %" PRIu32, this->touch_sleep_timeout_);
+  }
+
+  if (this->wake_up_page_ != -1) {
+    ESP_LOGCONFIG(TAG, "  Wake Up Page:     %" PRId16, this->wake_up_page_);
+  }
+
+  if (this->start_up_page_ != -1) {
+    ESP_LOGCONFIG(TAG, "  Start Up Page:    %" PRId16, this->start_up_page_);
+  }
+}
+
+float Nextion::get_setup_priority() const { return setup_priority::DATA; }
+void Nextion::update() {
+  if (!this->is_setup()) {
+    return;
+  }
+  if (this->writer_.has_value()) {
+    (*this->writer_)(*this);
+  }
+}
+
+void Nextion::add_sleep_state_callback(std::function<void()> &&callback) {
+  this->sleep_callback_.add(std::move(callback));
+}
+
+void Nextion::add_wake_state_callback(std::function<void()> &&callback) {
+  this->wake_callback_.add(std::move(callback));
+}
+
+void Nextion::add_setup_state_callback(std::function<void()> &&callback) {
+  this->setup_callback_.add(std::move(callback));
+}
+
+void Nextion::add_new_page_callback(std::function<void(uint8_t)> &&callback) {
+  this->page_callback_.add(std::move(callback));
+}
+
+void Nextion::add_touch_event_callback(std::function<void(uint8_t, uint8_t, bool)> &&callback) {
+  this->touch_callback_.add(std::move(callback));
+}
+
+void Nextion::add_buffer_overflow_event_callback(std::function<void()> &&callback) {
+  this->buffer_overflow_callback_.add(std::move(callback));
+}
+
+void Nextion::update_all_components() {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || this->is_sleeping())
+    return;
+
+  for (auto *binarysensortype : this->binarysensortype_) {
+    binarysensortype->update_component();
+  }
+  for (auto *sensortype : this->sensortype_) {
+    sensortype->update_component();
+  }
+  for (auto *switchtype : this->switchtype_) {
+    switchtype->update_component();
+  }
+  for (auto *textsensortype : this->textsensortype_) {
+    textsensortype->update_component();
+  }
+}
+
+bool Nextion::send_command(const char *command) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || this->is_sleeping())
+    return false;
+
+  if (this->send_command_(command)) {
+    this->add_no_result_to_queue_("send_command");
+    return true;
+  }
+  return false;
+}
+
+bool Nextion::send_command_printf(const char *format, ...) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || this->is_sleeping())
+    return false;
+
+  char buffer[256];
+  va_list arg;
+  va_start(arg, format);
+  int ret = vsnprintf(buffer, sizeof(buffer), format, arg);
+  va_end(arg);
+  if (ret <= 0) {
+    ESP_LOGW(TAG, "Building command for format '%s' failed!", format);
+    return false;
+  }
+
+  if (this->send_command_(buffer)) {
+    this->add_no_result_to_queue_("send_command_printf");
+    return true;
+  }
+  return false;
+}
+
+#ifdef NEXTION_PROTOCOL_LOG
+void Nextion::print_queue_members_() {
+  ESP_LOGN(TAG, "print_queue_members_ (top 10) size %zu", this->nextion_queue_.size());
+  ESP_LOGN(TAG, "*******************************************");
+  int count = 0;
+  for (auto *i : this->nextion_queue_) {
+    if (count++ == 10)
+      break;
+
+    if (i == nullptr) {
+      ESP_LOGN(TAG, "Nextion queue is null");
+    } else {
+      ESP_LOGN(TAG, "Nextion queue type: %d:%s , name: %s", i->component->get_queue_type(),
+               i->component->get_queue_type_string().c_str(), i->component->get_variable_name().c_str());
+    }
+  }
+  ESP_LOGN(TAG, "*******************************************");
+}
+#endif
+
+void Nextion::loop() {
+  if (!this->check_connect_() || this->is_updating_)
+    return;
+
+  if (this->nextion_reports_is_setup_ && !this->sent_setup_commands_) {
+    this->ignore_is_setup_ = true;
+    this->sent_setup_commands_ = true;
+    this->send_command_("bkcmd=3");  // Always, returns 0x00 to 0x23 result of serial command.
+
+    this->set_backlight_brightness(this->brightness_);
+
+    // Check if a startup page has been set and send the command
+    if (this->start_up_page_ != -1) {
+      this->goto_page(this->start_up_page_);
+    }
+
+    // This could probably be removed from the loop area, as those are redundant.
+    this->set_auto_wake_on_touch(this->auto_wake_on_touch_);
+    this->set_exit_reparse_on_start(this->exit_reparse_on_start_);
+
+    if (this->touch_sleep_timeout_ != 0) {
+      this->set_touch_sleep_timeout(this->touch_sleep_timeout_);
+    }
+
+    if (this->wake_up_page_ != -1) {
+      this->set_wake_up_page(this->wake_up_page_);
+    }
+
+    this->ignore_is_setup_ = false;
+  }
+
+  this->process_serial_();            // Receive serial data
+  this->process_nextion_commands_();  // Process nextion return commands
+
+  if (!this->nextion_reports_is_setup_) {
+    if (this->started_ms_ == 0)
+      this->started_ms_ = millis();
+
+    if (this->started_ms_ + this->startup_override_ms_ < millis()) {
+      ESP_LOGD(TAG, "Manually set nextion report ready");
+      this->nextion_reports_is_setup_ = true;
+    }
+  }
+}
+
+bool Nextion::remove_from_q_(bool report_empty) {
+  if (this->nextion_queue_.empty()) {
+    if (report_empty) {
+      ESP_LOGE(TAG, "Nextion queue is empty!");
+    }
+    return false;
+  }
+
+  NextionQueue *nb = this->nextion_queue_.front();
+  NextionComponentBase *component = nb->component;
+
+  ESP_LOGN(TAG, "Removing %s from the queue", component->get_variable_name().c_str());
+
+  if (component->get_queue_type() == NextionQueueType::NO_RESULT) {
+    if (component->get_variable_name() == "sleep_wake") {
+      this->is_sleeping_ = false;
+    }
+    delete component;  // NOLINT(cppcoreguidelines-owning-memory)
+  }
+  delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+  this->nextion_queue_.pop_front();
+  return true;
+}
+
+void Nextion::process_serial_() {
+  uint8_t d;
+
+  while (this->available()) {
+    read_byte(&d);
+    this->command_data_ += d;
+  }
+}
+// nextion.tech/instruction-set/
+void Nextion::process_nextion_commands_() {
+  if (this->command_data_.empty()) {
+    return;
+  }
+
+  size_t to_process_length = 0;
+  std::string to_process;
+
+  ESP_LOGN(TAG, "this->command_data_ %s length %d", this->command_data_.c_str(), this->command_data_.length());
+#ifdef NEXTION_PROTOCOL_LOG
+  this->print_queue_members_();
+#endif
+  while ((to_process_length = this->command_data_.find(COMMAND_DELIMITER)) != std::string::npos) {
+    ESP_LOGN(TAG, "print_queue_members_ size %zu", this->nextion_queue_.size());
+    while (to_process_length + COMMAND_DELIMITER.length() < this->command_data_.length() &&
+           static_cast<uint8_t>(this->command_data_[to_process_length + COMMAND_DELIMITER.length()]) == 0xFF) {
+      ++to_process_length;
+      ESP_LOGN(TAG, "Add extra 0xFF to process");
+    }
+
+    this->nextion_event_ = this->command_data_[0];
+
+    to_process_length -= 1;
+    to_process = this->command_data_.substr(1, to_process_length);
+
+    switch (this->nextion_event_) {
+      case 0x00:  // instruction sent by user has failed
+        ESP_LOGW(TAG, "Nextion reported invalid instruction!");
+        this->remove_from_q_();
+
+        break;
+      case 0x01:  // instruction sent by user was successful
+
+        ESP_LOGVV(TAG, "instruction sent by user was successful");
+        ESP_LOGN(TAG, "this->nextion_queue_.empty() %s", this->nextion_queue_.empty() ? "True" : "False");
+
+        this->remove_from_q_();
+        if (!this->is_setup_) {
+          if (this->nextion_queue_.empty()) {
+            ESP_LOGD(TAG, "Nextion is setup");
+            this->is_setup_ = true;
+            this->setup_callback_.call();
+          }
+        }
+
+        break;
+      case 0x02:  // invalid Component ID or name was used
+        ESP_LOGW(TAG, "Nextion reported component ID or name invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x03:  // invalid Page ID or name was used
+        ESP_LOGW(TAG, "Nextion reported page ID invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x04:  // invalid Picture ID was used
+        ESP_LOGW(TAG, "Nextion reported picture ID invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x05:  // invalid Font ID was used
+        ESP_LOGW(TAG, "Nextion reported font ID invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x06:  // File operation fails
+        ESP_LOGW(TAG, "Nextion File operation fail!");
+        break;
+      case 0x09:  // Instructions with CRC validation fails their CRC check
+        ESP_LOGW(TAG, "Nextion Instructions with CRC validation fails their CRC check!");
+        break;
+      case 0x11:  // invalid Baud rate was used
+        ESP_LOGW(TAG, "Nextion reported baud rate invalid!");
+        break;
+      case 0x12:  // invalid Waveform ID or Channel # was used
+        if (this->waveform_queue_.empty()) {
+          ESP_LOGW(TAG,
+                   "Nextion reported invalid Waveform ID or Channel # was used but no waveform sensor in queue found!");
+        } else {
+          auto &nb = this->waveform_queue_.front();
+          NextionComponentBase *component = nb->component;
+
+          ESP_LOGW(TAG, "Nextion reported invalid Waveform ID %d or Channel # %d was used!",
+                   component->get_component_id(), component->get_wave_channel_id());
+
+          ESP_LOGN(TAG, "Removing waveform from queue with component id %d and waveform id %d",
+                   component->get_component_id(), component->get_wave_channel_id());
+
+          delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+          this->waveform_queue_.pop_front();
+        }
+        break;
+      case 0x1A:  // variable name invalid
+        ESP_LOGW(TAG, "Nextion reported variable name invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x1B:  // variable operation invalid
+        ESP_LOGW(TAG, "Nextion reported variable operation invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x1C:  // failed to assign
+        ESP_LOGW(TAG, "Nextion reported failed to assign variable!");
+        this->remove_from_q_();
+        break;
+      case 0x1D:  // operate EEPROM failed
+        ESP_LOGW(TAG, "Nextion reported operating EEPROM failed!");
+        break;
+      case 0x1E:  // parameter quantity invalid
+        ESP_LOGW(TAG, "Nextion reported parameter quantity invalid!");
+        this->remove_from_q_();
+        break;
+      case 0x1F:  // IO operation failed
+        ESP_LOGW(TAG, "Nextion reported component I/O operation invalid!");
+        break;
+      case 0x20:  // undefined escape characters
+        ESP_LOGW(TAG, "Nextion reported undefined escape characters!");
+        this->remove_from_q_();
+        break;
+      case 0x23:  // too long variable name
+        ESP_LOGW(TAG, "Nextion reported too long variable name!");
+        this->remove_from_q_();
+        break;
+      case 0x24:  //  Serial Buffer overflow occurs
+        // Buffer will continue to receive the current instruction, all previous instructions are lost.
+        ESP_LOGE(TAG, "Nextion reported Serial Buffer overflow!");
+        this->buffer_overflow_callback_.call();
+        break;
+      case 0x65: {  // touch event return data
+        if (to_process_length != 3) {
+          ESP_LOGW(TAG, "Touch event data is expecting 3, received %zu", to_process_length);
+          break;
+        }
+
+        uint8_t page_id = to_process[0];
+        uint8_t component_id = to_process[1];
+        uint8_t touch_event = to_process[2];  // 0 -> release, 1 -> press
+        ESP_LOGD(TAG, "Got touch event:");
+        ESP_LOGD(TAG, "  page_id:      %u", page_id);
+        ESP_LOGD(TAG, "  component_id: %u", component_id);
+        ESP_LOGD(TAG, "  event type:   %s", touch_event ? "PRESS" : "RELEASE");
+        for (auto *touch : this->touch_) {
+          touch->process_touch(page_id, component_id, touch_event != 0);
+        }
+        this->touch_callback_.call(page_id, component_id, touch_event != 0);
+        break;
+      }
+      case 0x66: {  // Nextion initiated new page event return data.
+                    // Also is used for sendme command which we never explicitly initiate
+        if (to_process_length != 1) {
+          ESP_LOGW(TAG, "New page event data is expecting 1, received %zu", to_process_length);
+          break;
+        }
+
+        uint8_t page_id = to_process[0];
+        ESP_LOGD(TAG, "Got new page: %u", page_id);
+        this->page_callback_.call(page_id);
+        break;
+      }
+      case 0x67: {  // Touch Coordinate (awake)
+        break;
+      }
+      case 0x68: {  // touch coordinate data (sleep)
+
+        if (to_process_length != 5) {
+          ESP_LOGW(TAG, "Touch coordinate data is expecting 5, received %zu", to_process_length);
+          ESP_LOGW(TAG, "%s", to_process.c_str());
+          break;
+        }
+
+        uint16_t x = (uint16_t(to_process[0]) << 8) | to_process[1];
+        uint16_t y = (uint16_t(to_process[2]) << 8) | to_process[3];
+        uint8_t touch_event = to_process[4];  // 0 -> release, 1 -> press
+        ESP_LOGD(TAG, "Got touch event:");
+        ESP_LOGD(TAG, "  x:    %u", x);
+        ESP_LOGD(TAG, "  y:    %u", y);
+        ESP_LOGD(TAG, "  type: %s", touch_event ? "PRESS" : "RELEASE");
+        break;
+      }
+
+      //  0x70 0x61 0x62 0x31 0x32 0x33 0xFF 0xFF 0xFF
+      //  Returned when using get command for a string.
+      //  Each byte is converted to char.
+      //  data: ab123
+      case 0x70:  // string variable data return
+      {
+        if (this->nextion_queue_.empty()) {
+          ESP_LOGW(TAG, "ERROR: Received string return but the queue is empty");
+          break;
+        }
+
+        NextionQueue *nb = this->nextion_queue_.front();
+        NextionComponentBase *component = nb->component;
+
+        if (component->get_queue_type() != NextionQueueType::TEXT_SENSOR) {
+          ESP_LOGE(TAG, "ERROR: Received string return but next in queue \"%s\" is not a text sensor",
+                   component->get_variable_name().c_str());
+        } else {
+          ESP_LOGN(TAG, "Received get_string response: \"%s\" for component id: %s, type: %s", to_process.c_str(),
+                   component->get_variable_name().c_str(), component->get_queue_type_string().c_str());
+          component->set_state_from_string(to_process, true, false);
+        }
+
+        delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+        this->nextion_queue_.pop_front();
+
+        break;
+      }
+        //  0x71 0x01 0x02 0x03 0x04 0xFF 0xFF 0xFF
+        //  Returned when get command to return a number
+        //  4 byte 32-bit value in little endian order.
+        //  (0x01+0x02*256+0x03*65536+0x04*16777216)
+        //  data: 67305985
+      case 0x71:  // numeric variable data return
+      {
+        if (this->nextion_queue_.empty()) {
+          ESP_LOGE(TAG, "ERROR: Received numeric return but the queue is empty");
+          break;
+        }
+
+        if (to_process_length == 0) {
+          ESP_LOGE(TAG, "ERROR: Received numeric return but no data!");
+          break;
+        }
+
+        int value = 0;
+
+        for (int i = 0; i < 4; ++i) {
+          value += to_process[i] << (8 * i);
+        }
+
+        NextionQueue *nb = this->nextion_queue_.front();
+        NextionComponentBase *component = nb->component;
+
+        if (component->get_queue_type() != NextionQueueType::SENSOR &&
+            component->get_queue_type() != NextionQueueType::BINARY_SENSOR &&
+            component->get_queue_type() != NextionQueueType::SWITCH) {
+          ESP_LOGE(TAG, "ERROR: Received numeric return but next in queue \"%s\" is not a valid sensor type %d",
+                   component->get_variable_name().c_str(), component->get_queue_type());
+        } else {
+          ESP_LOGN(TAG, "Received numeric return for variable %s, queue type %d:%s, value %d",
+                   component->get_variable_name().c_str(), component->get_queue_type(),
+                   component->get_queue_type_string().c_str(), value);
+          component->set_state_from_int(value, true, false);
+        }
+
+        delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+        this->nextion_queue_.pop_front();
+
+        break;
+      }
+
+      case 0x86: {  // device automatically enters into sleep mode
+        ESP_LOGVV(TAG, "Received Nextion entering sleep automatically");
+        this->is_sleeping_ = true;
+        this->sleep_callback_.call();
+        break;
+      }
+      case 0x87:  // device automatically wakes up
+      {
+        ESP_LOGVV(TAG, "Received Nextion leaves sleep automatically");
+        this->is_sleeping_ = false;
+        this->wake_callback_.call();
+        this->all_components_send_state_(false);
+        break;
+      }
+      case 0x88:  // system successful start up
+      {
+        ESP_LOGD(TAG, "system successful start up %zu", to_process_length);
+        this->nextion_reports_is_setup_ = true;
+        break;
+      }
+      case 0x89: {  // start SD card upgrade
+        break;
+      }
+      // Data from nextion is
+      // 0x90 - Start
+      // variable length of 0x70 return formatted data (bytes) that contain the variable name: prints "temp1",0
+      // 00 - NULL
+      // 00/01 - Single byte for on/off
+      // FF FF FF - End
+      case 0x90: {  // Switched component
+        std::string variable_name;
+
+        // Get variable name
+        auto index = to_process.find('\0');
+        if (index == std::string::npos || (to_process_length - index - 1) < 1) {
+          ESP_LOGE(TAG, "Bad switch component data received for 0x90 event!");
+          ESP_LOGN(TAG, "to_process %s %zu %d", to_process.c_str(), to_process_length, index);
+          break;
+        }
+
+        variable_name = to_process.substr(0, index);
+        ++index;
+
+        ESP_LOGN(TAG, "Got Switch:");
+        ESP_LOGN(TAG, "  variable_name: %s", variable_name.c_str());
+        ESP_LOGN(TAG, "  value:         %d", to_process[0] != 0);
+
+        for (auto *switchtype : this->switchtype_) {
+          switchtype->process_bool(variable_name, to_process[index] != 0);
+        }
+        break;
+      }
+      // Data from nextion is
+      // 0x91 - Start
+      // variable length of 0x70 return formatted data (bytes) that contain the variable name: prints "temp1",0
+      // 00 - NULL
+      // variable length of 0x71 return data: prints temp1.val,0
+      // FF FF FF - End
+      case 0x91: {  // Sensor component
+        std::string variable_name;
+
+        auto index = to_process.find('\0');
+        if (index == std::string::npos || (to_process_length - index - 1) != 4) {
+          ESP_LOGE(TAG, "Bad sensor component data received for 0x91 event!");
+          ESP_LOGN(TAG, "to_process %s %zu %d", to_process.c_str(), to_process_length, index);
+          break;
+        }
+
+        index = to_process.find('\0');
+        variable_name = to_process.substr(0, index);
+        // // Get variable name
+        int value = 0;
+        for (int i = 0; i < 4; ++i) {
+          value += to_process[i + index + 1] << (8 * i);
+        }
+
+        ESP_LOGN(TAG, "Got sensor:");
+        ESP_LOGN(TAG, "  variable_name: %s", variable_name.c_str());
+        ESP_LOGN(TAG, "  value:         %d", value);
+
+        for (auto *sensor : this->sensortype_) {
+          sensor->process_sensor(variable_name, value);
+        }
+        break;
+      }
+
+      // Data from nextion is
+      // 0x92 - Start
+      // variable length of 0x70 return formatted data (bytes) that contain the variable name: prints "temp1",0
+      // 00 - NULL
+      // variable length of 0x70 return formatted data (bytes) that contain the text prints temp1.txt,0
+      // 00 - NULL
+      // FF FF FF - End
+      case 0x92: {  // Text Sensor Component
+        std::string variable_name;
+        std::string text_value;
+
+        // Get variable name
+        auto index = to_process.find('\0');
+        if (index == std::string::npos || (to_process_length - index - 1) < 1) {
+          ESP_LOGE(TAG, "Bad text sensor component data received for 0x92 event!");
+          ESP_LOGN(TAG, "to_process %s %zu %d", to_process.c_str(), to_process_length, index);
+          break;
+        }
+
+        variable_name = to_process.substr(0, index);
+        ++index;
+
+        text_value = to_process.substr(index);
+
+        ESP_LOGN(TAG, "Got Text Sensor:");
+        ESP_LOGN(TAG, "  variable_name: %s", variable_name.c_str());
+        ESP_LOGN(TAG, "  value:         %s", text_value.c_str());
+
+        // NextionTextSensorResponseQueue *nq = new NextionTextSensorResponseQueue;
+        // nq->variable_name = variable_name;
+        // nq->state = text_value;
+        // this->textsensorq_.push_back(nq);
+        for (auto *textsensortype : this->textsensortype_) {
+          textsensortype->process_text(variable_name, text_value);
+        }
+        break;
+      }
+      // Data from nextion is
+      // 0x93 - Start
+      // variable length of 0x70 return formatted data (bytes) that contain the variable name: prints "temp1",0
+      // 00 - NULL
+      // 00/01 - Single byte for on/off
+      // FF FF FF - End
+      case 0x93: {  // Binary Sensor component
+        std::string variable_name;
+
+        // Get variable name
+        auto index = to_process.find('\0');
+        if (index == std::string::npos || (to_process_length - index - 1) < 1) {
+          ESP_LOGE(TAG, "Bad binary sensor component data received for 0x92 event!");
+          ESP_LOGN(TAG, "to_process %s %zu %d", to_process.c_str(), to_process_length, index);
+          break;
+        }
+
+        variable_name = to_process.substr(0, index);
+        ++index;
+
+        ESP_LOGN(TAG, "Got Binary Sensor:");
+        ESP_LOGN(TAG, "  variable_name: %s", variable_name.c_str());
+        ESP_LOGN(TAG, "  value:         %d", to_process[index] != 0);
+
+        for (auto *binarysensortype : this->binarysensortype_) {
+          binarysensortype->process_bool(&variable_name[0], to_process[index] != 0);
+        }
+        break;
+      }
+      case 0xFD: {  // data transparent transmit finished
+        ESP_LOGVV(TAG, "Nextion reported data transmit finished!");
+        this->check_pending_waveform_();
+        break;
+      }
+      case 0xFE: {  // data transparent transmit ready
+        ESP_LOGVV(TAG, "Nextion reported ready for transmit!");
+        if (this->waveform_queue_.empty()) {
+          ESP_LOGE(TAG, "No waveforms in queue to send data!");
+          break;
+        }
+
+        auto &nb = this->waveform_queue_.front();
+        auto *component = nb->component;
+        size_t buffer_to_send = component->get_wave_buffer_size() < 255 ? component->get_wave_buffer_size()
+                                                                        : 255;  // ADDT command can only send 255
+
+        this->write_array(component->get_wave_buffer().data(), static_cast<int>(buffer_to_send));
+
+        ESP_LOGN(TAG, "Nextion sending waveform data for component id %d and waveform id %d, size %zu",
+                 component->get_component_id(), component->get_wave_channel_id(), buffer_to_send);
+
+        component->clear_wave_buffer(buffer_to_send);
+        delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+        this->waveform_queue_.pop_front();
+        break;
+      }
+      default:
+        ESP_LOGW(TAG, "Received unknown event from nextion: 0x%02X", this->nextion_event_);
+        break;
+    }
+
+    // ESP_LOGN(TAG, "nextion_event_ deleting from 0 to %d", to_process_length + COMMAND_DELIMITER.length() + 1);
+    this->command_data_.erase(0, to_process_length + COMMAND_DELIMITER.length() + 1);
+    // App.feed_wdt(); Remove before master merge
+    this->process_serial_();
+  }
+
+  uint32_t ms = millis();
+
+  if (!this->nextion_queue_.empty() && this->nextion_queue_.front()->queue_time + this->max_q_age_ms_ < ms) {
+    for (size_t i = 0; i < this->nextion_queue_.size(); i++) {
+      NextionComponentBase *component = this->nextion_queue_[i]->component;
+      if (this->nextion_queue_[i]->queue_time + this->max_q_age_ms_ < ms) {
+        if (this->nextion_queue_[i]->queue_time == 0) {
+          ESP_LOGD(TAG, "Removing old queue type \"%s\" name \"%s\" queue_time 0",
+                   component->get_queue_type_string().c_str(), component->get_variable_name().c_str());
+        }
+
+        if (component->get_variable_name() == "sleep_wake") {
+          this->is_sleeping_ = false;
+        }
+
+        ESP_LOGD(TAG, "Removing old queue type \"%s\" name \"%s\"", component->get_queue_type_string().c_str(),
+                 component->get_variable_name().c_str());
+
+        if (component->get_queue_type() == NextionQueueType::NO_RESULT) {
+          if (component->get_variable_name() == "sleep_wake") {
+            this->is_sleeping_ = false;
+          }
+          delete component;  // NOLINT(cppcoreguidelines-owning-memory)
+        }
+
+        delete this->nextion_queue_[i];  // NOLINT(cppcoreguidelines-owning-memory)
+
+        this->nextion_queue_.erase(this->nextion_queue_.begin() + i);
+        i--;
+
+      } else {
+        break;
+      }
+    }
+  }
+  ESP_LOGN(TAG, "Loop End");
+  // App.feed_wdt(); Remove before master merge
+  this->process_serial_();
+}  // namespace nextion
+
+void Nextion::set_nextion_sensor_state(int queue_type, const std::string &name, float state) {
+  this->set_nextion_sensor_state(static_cast<NextionQueueType>(queue_type), name, state);
+}
+
+void Nextion::set_nextion_sensor_state(NextionQueueType queue_type, const std::string &name, float state) {
+  ESP_LOGN(TAG, "Received state:");
+  ESP_LOGN(TAG, "  variable:   %s", name.c_str());
+  ESP_LOGN(TAG, "  state:      %lf", state);
+  ESP_LOGN(TAG, "  queue type: %d", queue_type);
+
+  switch (queue_type) {
+    case NextionQueueType::SENSOR: {
+      for (auto *sensor : this->sensortype_) {
+        if (name == sensor->get_variable_name()) {
+          sensor->set_state(state, true, true);
+          break;
+        }
+      }
+      break;
+    }
+    case NextionQueueType::BINARY_SENSOR: {
+      for (auto *sensor : this->binarysensortype_) {
+        if (name == sensor->get_variable_name()) {
+          sensor->set_state(state != 0, true, true);
+          break;
+        }
+      }
+      break;
+    }
+    case NextionQueueType::SWITCH: {
+      for (auto *sensor : this->switchtype_) {
+        if (name == sensor->get_variable_name()) {
+          sensor->set_state(state != 0, true, true);
+          break;
+        }
+      }
+      break;
+    }
+    default: {
+      ESP_LOGW(TAG, "set_nextion_sensor_state does not support a queue type %d", queue_type);
+    }
+  }
+}
+
+void Nextion::set_nextion_text_state(const std::string &name, const std::string &state) {
+  ESP_LOGD(TAG, "Received state:");
+  ESP_LOGD(TAG, "  variable: %s", name.c_str());
+  ESP_LOGD(TAG, "  state:    %s", state.c_str());
+
+  for (auto *sensor : this->textsensortype_) {
+    if (name == sensor->get_variable_name()) {
+      sensor->set_state(state, true, true);
+      break;
+    }
+  }
+}
+
+void Nextion::all_components_send_state_(bool force_update) {
+  ESP_LOGD(TAG, "all_components_send_state_ ");
+  for (auto *binarysensortype : this->binarysensortype_) {
+    if (force_update || binarysensortype->get_needs_to_send_update())
+      binarysensortype->send_state_to_nextion();
+  }
+  for (auto *sensortype : this->sensortype_) {
+    if ((force_update || sensortype->get_needs_to_send_update()) && sensortype->get_wave_chan_id() == 0)
+      sensortype->send_state_to_nextion();
+  }
+  for (auto *switchtype : this->switchtype_) {
+    if (force_update || switchtype->get_needs_to_send_update())
+      switchtype->send_state_to_nextion();
+  }
+  for (auto *textsensortype : this->textsensortype_) {
+    if (force_update || textsensortype->get_needs_to_send_update())
+      textsensortype->send_state_to_nextion();
+  }
+}
+
+void Nextion::update_components_by_prefix(const std::string &prefix) {
+  for (auto *binarysensortype : this->binarysensortype_) {
+    if (binarysensortype->get_variable_name().find(prefix, 0) != std::string::npos)
+      binarysensortype->update_component_settings(true);
+  }
+  for (auto *sensortype : this->sensortype_) {
+    if (sensortype->get_variable_name().find(prefix, 0) != std::string::npos)
+      sensortype->update_component_settings(true);
+  }
+  for (auto *switchtype : this->switchtype_) {
+    if (switchtype->get_variable_name().find(prefix, 0) != std::string::npos)
+      switchtype->update_component_settings(true);
+  }
+  for (auto *textsensortype : this->textsensortype_) {
+    if (textsensortype->get_variable_name().find(prefix, 0) != std::string::npos)
+      textsensortype->update_component_settings(true);
+  }
+}
+
+uint16_t Nextion::recv_ret_string_(std::string &response, uint32_t timeout, bool recv_flag) {
+  uint16_t ret = 0;
+  uint8_t c = 0;
+  uint8_t nr_of_ff_bytes = 0;
+  uint64_t start;
+  bool exit_flag = false;
+  bool ff_flag = false;
+
+  start = millis();
+
+  while ((timeout == 0 && this->available()) || millis() - start <= timeout) {
+    if (!this->available()) {
+      App.feed_wdt();
+      delay(1);
+      continue;
+    }
+
+    this->read_byte(&c);
+    if (c == 0xFF) {
+      nr_of_ff_bytes++;
+    } else {
+      nr_of_ff_bytes = 0;
+      ff_flag = false;
+    }
+
+    if (nr_of_ff_bytes >= 3)
+      ff_flag = true;
+
+    response += (char) c;
+    if (recv_flag) {
+      if (response.find(0x05) != std::string::npos) {
+        exit_flag = true;
+      }
+    }
+    App.feed_wdt();
+    delay(2);
+
+    if (exit_flag || ff_flag) {
+      break;
+    }
+  }
+
+  if (ff_flag)
+    response = response.substr(0, response.length() - 3);  // Remove last 3 0xFF
+
+  ret = response.length();
+  return ret;
+}
+
+/**
+ * @brief
+ *
+ * @param variable_name Name for the queue
+ */
+void Nextion::add_no_result_to_queue_(const std::string &variable_name) {
+  // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
+  nextion::NextionQueue *nextion_queue = new nextion::NextionQueue;
+
+  // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
+  nextion_queue->component = new nextion::NextionComponentBase;
+  nextion_queue->component->set_variable_name(variable_name);
+
+  nextion_queue->queue_time = millis();
+
+  this->nextion_queue_.push_back(nextion_queue);
+
+  ESP_LOGN(TAG, "Add to queue type: NORESULT component %s", nextion_queue->component->get_variable_name().c_str());
+}
+
+/**
+ * @brief
+ *
+ * @param variable_name Variable name for the queue
+ * @param command
+ */
+void Nextion::add_no_result_to_queue_with_command_(const std::string &variable_name, const std::string &command) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || command.empty())
+    return;
+
+  if (this->send_command_(command)) {
+    this->add_no_result_to_queue_(variable_name);
+  }
+}
+
+bool Nextion::add_no_result_to_queue_with_ignore_sleep_printf_(const std::string &variable_name, const char *format,
+                                                               ...) {
+  if ((!this->is_setup() && !this->ignore_is_setup_))
+    return false;
+
+  char buffer[256];
+  va_list arg;
+  va_start(arg, format);
+  int ret = vsnprintf(buffer, sizeof(buffer), format, arg);
+  va_end(arg);
+  if (ret <= 0) {
+    ESP_LOGW(TAG, "Building command for format '%s' failed!", format);
+    return false;
+  }
+
+  this->add_no_result_to_queue_with_command_(variable_name, buffer);
+  return true;
+}
+
+/**
+ * @brief Sends a formatted command to the nextion
+ *
+ * @param variable_name Variable name for the queue
+ * @param format The printf-style command format, like "vis %s,0"
+ * @param ... The format arguments
+ */
+bool Nextion::add_no_result_to_queue_with_printf_(const std::string &variable_name, const char *format, ...) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || this->is_sleeping())
+    return false;
+
+  char buffer[256];
+  va_list arg;
+  va_start(arg, format);
+  int ret = vsnprintf(buffer, sizeof(buffer), format, arg);
+  va_end(arg);
+  if (ret <= 0) {
+    ESP_LOGW(TAG, "Building command for format '%s' failed!", format);
+    return false;
+  }
+
+  this->add_no_result_to_queue_with_command_(variable_name, buffer);
+  return true;
+}
+
+/**
+ * @brief
+ *
+ * @param variable_name Variable name for the queue
+ * @param variable_name_to_send Variable name for the left of the command
+ * @param state_value Value to set
+ * @param is_sleep_safe The command is safe to send when the Nextion is sleeping
+ */
+
+void Nextion::add_no_result_to_queue_with_set(NextionComponentBase *component, int32_t state_value) {
+  this->add_no_result_to_queue_with_set(component->get_variable_name(), component->get_variable_name_to_send(),
+                                        state_value);
+}
+
+void Nextion::add_no_result_to_queue_with_set(const std::string &variable_name,
+                                              const std::string &variable_name_to_send, int32_t state_value) {
+  this->add_no_result_to_queue_with_set_internal_(variable_name, variable_name_to_send, state_value);
+}
+
+void Nextion::add_no_result_to_queue_with_set_internal_(const std::string &variable_name,
+                                                        const std::string &variable_name_to_send, int32_t state_value,
+                                                        bool is_sleep_safe) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || (!is_sleep_safe && this->is_sleeping()))
+    return;
+
+  this->add_no_result_to_queue_with_ignore_sleep_printf_(variable_name, "%s=%" PRId32, variable_name_to_send.c_str(),
+                                                         state_value);
+}
+
+/**
+ * @brief
+ *
+ * @param variable_name Variable name for the queue
+ * @param variable_name_to_send Variable name for the left of the command
+ * @param state_value String value to set
+ * @param is_sleep_safe The command is safe to send when the Nextion is sleeping
+ */
+void Nextion::add_no_result_to_queue_with_set(NextionComponentBase *component, const std::string &state_value) {
+  this->add_no_result_to_queue_with_set(component->get_variable_name(), component->get_variable_name_to_send(),
+                                        state_value);
+}
+void Nextion::add_no_result_to_queue_with_set(const std::string &variable_name,
+                                              const std::string &variable_name_to_send,
+                                              const std::string &state_value) {
+  this->add_no_result_to_queue_with_set_internal_(variable_name, variable_name_to_send, state_value);
+}
+
+void Nextion::add_no_result_to_queue_with_set_internal_(const std::string &variable_name,
+                                                        const std::string &variable_name_to_send,
+                                                        const std::string &state_value, bool is_sleep_safe) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || (!is_sleep_safe && this->is_sleeping()))
+    return;
+
+  this->add_no_result_to_queue_with_printf_(variable_name, "%s=\"%s\"", variable_name_to_send.c_str(),
+                                            state_value.c_str());
+}
+
+void Nextion::add_to_get_queue(NextionComponentBase *component) {
+  if ((!this->is_setup() && !this->ignore_is_setup_))
+    return;
+
+  // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
+  nextion::NextionQueue *nextion_queue = new nextion::NextionQueue;
+
+  nextion_queue->component = component;
+  nextion_queue->queue_time = millis();
+
+  ESP_LOGN(TAG, "Add to queue type: %s component %s", component->get_queue_type_string().c_str(),
+           component->get_variable_name().c_str());
+
+  std::string command = "get " + component->get_variable_name_to_send();
+
+  if (this->send_command_(command)) {
+    this->nextion_queue_.push_back(nextion_queue);
+  }
+}
+
+/**
+ * @brief Add addt command to the queue
+ *
+ * @param component_id The waveform component id
+ * @param wave_chan_id The waveform channel to send it to
+ * @param buffer_to_send The buffer size
+ * @param buffer_size The buffer data
+ */
+void Nextion::add_addt_command_to_queue(NextionComponentBase *component) {
+  if ((!this->is_setup() && !this->ignore_is_setup_) || this->is_sleeping())
+    return;
+
+  // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
+  nextion::NextionQueue *nextion_queue = new nextion::NextionQueue;
+
+  nextion_queue->component = component;
+  nextion_queue->queue_time = millis();
+
+  this->waveform_queue_.push_back(nextion_queue);
+  if (this->waveform_queue_.size() == 1)
+    this->check_pending_waveform_();
+}
+
+void Nextion::check_pending_waveform_() {
+  if (this->waveform_queue_.empty())
+    return;
+
+  auto *nb = this->waveform_queue_.front();
+  auto *component = nb->component;
+  size_t buffer_to_send = component->get_wave_buffer_size() < 255 ? component->get_wave_buffer_size()
+                                                                  : 255;  // ADDT command can only send 255
+
+  std::string command = "addt " + to_string(component->get_component_id()) + "," +
+                        to_string(component->get_wave_channel_id()) + "," + to_string(buffer_to_send);
+  if (!this->send_command_(command)) {
+    delete nb;  // NOLINT(cppcoreguidelines-owning-memory)
+    this->waveform_queue_.pop_front();
+  }
+}
+
+void Nextion::set_writer(const nextion_writer_t &writer) { this->writer_ = writer; }
+
+ESPDEPRECATED("set_wait_for_ack(bool) is deprecated and has no effect", "v1.20")
+void Nextion::set_wait_for_ack(bool wait_for_ack) { ESP_LOGE(TAG, "This command is deprecated"); }
+
+bool Nextion::is_updating() { return this->is_updating_; }
+
+}  // namespace nextion
+}  // namespace esphome