cuda-cccl 0.3.3__cp313-cp313-win_amd64.whl

cuda/cccl/headers/include/cub/device/device_select.cuh

@@ -0,0 +1,1228 @@
+/******************************************************************************
+ * Copyright (c) 2011, Duane Merrill.  All rights reserved.
+ * Copyright (c) 2011-2022, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the NVIDIA CORPORATION nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************/
+
+//! @file
+//! cub::DeviceSelect provides device-wide, parallel operations for compacting selected items from sequences of data
+//! items residing within device-accessible memory.
+
+#pragma once
+
+#include <cub/config.cuh>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+
+#include <cub/detail/choose_offset.cuh>
+#include <cub/device/dispatch/dispatch_select_if.cuh>
+#include <cub/device/dispatch/dispatch_unique_by_key.cuh>
+
+#include <cuda/std/__functional/operations.h>
+#include <cuda/std/__type_traits/enable_if.h>
+#include <cuda/std/__type_traits/is_convertible.h>
+#include <cuda/std/cstdint>
+
+CUB_NAMESPACE_BEGIN
+
+//! @rst
+//! DeviceSelect provides device-wide, parallel operations for compacting selected items from sequences of data items
+//! residing within device-accessible memory. It is similar to DevicePartition, except that non-selected items are
+//! discarded, whereas DevicePartition retains them.
+//!
+//! Overview
+//! +++++++++++++++++++++++++++++++++++++++++++++
+//!
+//! These operations apply a selection criterion to selectively copy
+//! items from a specified input sequence to a compact output sequence.
+//!
+//! Usage Considerations
+//! +++++++++++++++++++++++++++++++++++++++++++++
+//!
+//! @cdp_class{DeviceSelect}
+//!
+//! Performance
+//! +++++++++++++++++++++++++++++++++++++++++++++
+//!
+//! @linear_performance{select-flagged, select-if, and select-unique}
+//!
+//! @endrst
+struct DeviceSelect
+{
+  //! @rst
+  //! Uses the ``d_flags`` sequence to selectively copy the corresponding items from ``d_in`` into ``d_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The value type of ``d_flags`` must be castable to ``bool`` (e.g., ``bool``, ``char``, ``int``, etc.).
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain their original relative ordering.
+  //! - | The range ``[d_out, d_out + *d_num_selected_out)`` shall not overlap ``[d_in, d_in + num_items)``,
+  //!   | ``[d_flags, d_flags + num_items)`` nor ``d_num_selected_out`` in any way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>  // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers for input,
+  //!    // flags, and output
+  //!    int  num_items;              // e.g., 8
+  //!    int  *d_in;                  // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
+  //!    char *d_flags;               // e.g., [1, 0, 0, 1, 0, 1, 1, 0]
+  //!    int  *d_out;                 // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_num_selected_out;    // e.g., [ ]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::Flagged(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_flags, d_out, d_num_selected_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::Flagged(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_flags, d_out, d_num_selected_out, num_items);
+  //!
+  //!    // d_out                 <-- [1, 4, 6, 7]
+  //!    // d_num_selected_out    <-- [4]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam FlagIterator
+  //!   **[inferred]** Random-access input iterator type for reading selection flags @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected items @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[in] d_flags
+  //!   Pointer to the input sequence of selection flags
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output sequence of selected data items
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected (i.e., length of `d_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename FlagIterator, typename OutputIteratorT, typename NumSelectedIteratorT>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t Flagged(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    FlagIterator d_flags,
+    OutputIteratorT d_out,
+    NumSelectedIteratorT d_num_selected_out,
+    ::cuda::std::int64_t num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::Flagged");
+
+    using OffsetT    = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using SelectOp   = NullType; // Selection op (not used)
+    using EqualityOp = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<
+      InputIteratorT,
+      FlagIterator,
+      OutputIteratorT,
+      NumSelectedIteratorT,
+      SelectOp,
+      EqualityOp,
+      OffsetT,
+      SelectImpl::Select>::Dispatch(d_temp_storage,
+                                    temp_storage_bytes,
+                                    d_in,
+                                    d_flags,
+                                    d_out,
+                                    d_num_selected_out,
+                                    SelectOp(),
+                                    EqualityOp(),
+                                    num_items,
+                                    stream);
+  }
+
+  //! @rst
+  //! Uses the ``d_flags`` sequence to selectively compact the items in `d_data``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The value type of ``d_flags`` must be castable to ``bool`` (e.g., ``bool``, ``char``, ``int``, etc.).
+  //! - Copies of the selected items are compacted in-place and maintain their original relative ordering.
+  //! - | The ``d_data`` may equal ``d_flags``. The range ``[d_data, d_data + num_items)`` shall not overlap
+  //!   | ``[d_flags, d_flags + num_items)`` in any other way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>  // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers for input,
+  //!    // flags, and output
+  //!    int  num_items;              // e.g., 8
+  //!    int  *d_data;                // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
+  //!    char *d_flags;               // e.g., [1, 0, 0, 1, 0, 1, 1, 0]
+  //!    int  *d_num_selected_out;    // e.g., [ ]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::Flagged(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_flags, d_num_selected_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::Flagged(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_flags, d_num_selected_out, num_items);
+  //!
+  //!    // d_data                <-- [1, 4, 6, 7]
+  //!    // d_num_selected_out    <-- [4]
+  //!
+  //! @endrst
+  //!
+  //! @tparam IteratorT
+  //!   **[inferred]** Random-access iterator type for reading and writing selected items @iterator
+  //!
+  //! @tparam FlagIterator
+  //!   **[inferred]** Random-access input iterator type for reading selection flags @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in,out] d_data
+  //!   Pointer to the sequence of data items
+  //!
+  //! @param[in] d_flags
+  //!   Pointer to the input sequence of selection flags
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_data`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename IteratorT, typename FlagIterator, typename NumSelectedIteratorT>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t Flagged(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    IteratorT d_data,
+    FlagIterator d_flags,
+    NumSelectedIteratorT d_num_selected_out,
+    ::cuda::std::int64_t num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::Flagged");
+
+    using OffsetT    = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using SelectOp   = NullType; // Selection op (not used)
+    using EqualityOp = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<IteratorT,
+                            FlagIterator,
+                            IteratorT,
+                            NumSelectedIteratorT,
+                            SelectOp,
+                            EqualityOp,
+                            OffsetT,
+                            SelectImpl::SelectPotentiallyInPlace>::
+      Dispatch(
+        d_temp_storage,
+        temp_storage_bytes,
+        d_data, // in
+        d_flags,
+        d_data, // out
+        d_num_selected_out,
+        SelectOp(),
+        EqualityOp(),
+        num_items,
+        stream);
+  }
+
+  //! @rst
+  //! Uses the ``select_op`` functor to selectively copy items from ``d_in`` into ``d_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain
+  //!   their original relative ordering.
+  //! - | The range ``[d_out, d_out + *d_num_selected_out)`` shall not overlap
+  //!   | ``[d_in, d_in + num_items)`` nor ``d_num_selected_out`` in any way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>   // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Functor type for selecting values less than some criteria
+  //!    struct LessThan
+  //!    {
+  //!        int compare;
+  //!
+  //!        __host__ __device__ __forceinline__
+  //!        LessThan(int compare) : compare(compare) {}
+  //!
+  //!        __host__ __device__ __forceinline__
+  //!        bool operator()(const int &a) const {
+  //!            return (a < compare);
+  //!        }
+  //!    };
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int      num_items;              // e.g., 8
+  //!    int      *d_in;                  // e.g., [0, 2, 3, 9, 5, 2, 81, 8]
+  //!    int      *d_out;                 // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int      *d_num_selected_out;    // e.g., [ ]
+  //!    LessThan select_op(7);
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::If(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, d_num_selected_out, num_items, select_op);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::If(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, d_num_selected_out, num_items, select_op);
+  //!
+  //!    // d_out                 <-- [0, 2, 3, 5, 2]
+  //!    // d_num_selected_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected items @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam SelectOp
+  //!   **[inferred]** Selection operator type having member `bool operator()(const T &a)`
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output sequence of selected data items
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!   (i.e., length of `d_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] select_op
+  //!   Unary selection operator
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename NumSelectedIteratorT, typename SelectOp>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t
+  If(void* d_temp_storage,
+     size_t& temp_storage_bytes,
+     InputIteratorT d_in,
+     OutputIteratorT d_out,
+     NumSelectedIteratorT d_num_selected_out,
+     ::cuda::std::int64_t num_items,
+     SelectOp select_op,
+     cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::If");
+
+    using OffsetT      = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using FlagIterator = NullType*; // FlagT iterator type (not used)
+    using EqualityOp   = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<
+      InputIteratorT,
+      FlagIterator,
+      OutputIteratorT,
+      NumSelectedIteratorT,
+      SelectOp,
+      EqualityOp,
+      OffsetT,
+      SelectImpl::Select>::Dispatch(d_temp_storage,
+                                    temp_storage_bytes,
+                                    d_in,
+                                    nullptr,
+                                    d_out,
+                                    d_num_selected_out,
+                                    select_op,
+                                    EqualityOp(),
+                                    num_items,
+                                    stream);
+  }
+
+  //! @rst
+  //! Uses the ``select_op`` functor to selectively compact items in ``d_data``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - | Copies of the selected items are compacted in ``d_data`` and maintain
+  //!   | their original relative ordering.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>   // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Functor type for selecting values less than some criteria
+  //!    struct LessThan
+  //!    {
+  //!        int compare;
+  //!
+  //!        __host__ __device__ __forceinline__
+  //!        LessThan(int compare) : compare(compare) {}
+  //!
+  //!        __host__ __device__ __forceinline__
+  //!        bool operator()(const int &a) const {
+  //!            return (a < compare);
+  //!        }
+  //!    };
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int      num_items;              // e.g., 8
+  //!    int      *d_data;                // e.g., [0, 2, 3, 9, 5, 2, 81, 8]
+  //!    int      *d_num_selected_out;    // e.g., [ ]
+  //!    LessThan select_op(7);
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::If(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_data, d_num_selected_out, num_items, select_op);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::If(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_data, d_num_selected_out, num_items, select_op);
+  //!
+  //!    // d_data                <-- [0, 2, 3, 5, 2]
+  //!    // d_num_selected_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam IteratorT
+  //!   **[inferred]** Random-access input iterator type for reading and writing items @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam SelectOp
+  //!   **[inferred]** Selection operator type having member `bool operator()(const T &a)`
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in,out] d_data
+  //!   Pointer to the sequence of data items
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_data`)
+  //!
+  //! @param[in] select_op
+  //!   Unary selection operator
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename IteratorT, typename NumSelectedIteratorT, typename SelectOp>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t
+  If(void* d_temp_storage,
+     size_t& temp_storage_bytes,
+     IteratorT d_data,
+     NumSelectedIteratorT d_num_selected_out,
+     ::cuda::std::int64_t num_items,
+     SelectOp select_op,
+     cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::If");
+
+    using OffsetT      = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using FlagIterator = NullType*; // FlagT iterator type (not used)
+    using EqualityOp   = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<IteratorT,
+                            FlagIterator,
+                            IteratorT,
+                            NumSelectedIteratorT,
+                            SelectOp,
+                            EqualityOp,
+                            OffsetT,
+                            SelectImpl::SelectPotentiallyInPlace>::
+      Dispatch(
+        d_temp_storage,
+        temp_storage_bytes,
+        d_data, // in
+        nullptr,
+        d_data, // out
+        d_num_selected_out,
+        select_op,
+        EqualityOp(),
+        num_items,
+        stream);
+  }
+
+  //! @rst
+  //! Uses the ``select_op`` functor applied to ``d_flags`` to selectively copy the
+  //! corresponding items from ``d_in`` into ``d_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The expression ``select_op(flag)`` must be convertible to ``bool``,
+  //!   where the type of ``flag`` corresponds to the value type of ``FlagIterator``.
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain
+  //!   their original relative ordering.
+  //! - | The range ``[d_out, d_out + *d_num_selected_out)`` shall not overlap
+  //!   | ``[d_in, d_in + num_items)`` nor ``d_num_selected_out`` in any way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. literalinclude:: ../../../cub/test/catch2_test_device_select_api.cu
+  //!     :language: c++
+  //!     :dedent:
+  //!     :start-after: example-begin segmented-select-iseven
+  //!     :end-before: example-end segmented-select-iseven
+  //!
+  //! .. literalinclude:: ../../../cub/test/catch2_test_device_select_api.cu
+  //!     :language: c++
+  //!     :dedent:
+  //!     :start-after: example-begin segmented-select-flaggedif
+  //!     :end-before: example-end segmented-select-flaggedif
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam FlagIterator
+  //!   **[inferred]** Random-access input iterator type for reading selection flags @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected items @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam SelectOp
+  //!   **[inferred]** Selection operator type having member `bool operator()(const T &a)`
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[in] d_flags
+  //!   Pointer to the input sequence of selection flags
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output sequence of selected data items
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!   (i.e., length of `d_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] select_op
+  //!   Unary selection operator
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT,
+            typename FlagIterator,
+            typename OutputIteratorT,
+            typename NumSelectedIteratorT,
+            typename SelectOp>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t FlaggedIf(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    FlagIterator d_flags,
+    OutputIteratorT d_out,
+    NumSelectedIteratorT d_num_selected_out,
+    ::cuda::std::int64_t num_items,
+    SelectOp select_op,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::FlaggedIf");
+
+    using OffsetT    = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using EqualityOp = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<
+      InputIteratorT,
+      FlagIterator,
+      OutputIteratorT,
+      NumSelectedIteratorT,
+      SelectOp,
+      EqualityOp,
+      OffsetT,
+      SelectImpl::Select>::Dispatch(d_temp_storage,
+                                    temp_storage_bytes,
+                                    d_in,
+                                    d_flags,
+                                    d_out,
+                                    d_num_selected_out,
+                                    select_op,
+                                    EqualityOp(),
+                                    num_items,
+                                    stream);
+  }
+
+  //! @rst
+  //! Uses the ``select_op`` functor applied to ``d_flags`` to selectively compact the
+  //! corresponding items in ``d_data``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The expression ``select_op(flag)`` must be convertible to ``bool``,
+  //!   where the type of ``flag`` corresponds to the value type of ``FlagIterator``.
+  //! - Copies of the selected items are compacted in-place and maintain their original relative ordering.
+  //! - | The ``d_data`` may equal ``d_flags``. The range ``[d_data, d_data + num_items)`` shall not overlap
+  //!   | ``[d_flags, d_flags + num_items)`` in any other way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. literalinclude:: ../../../cub/test/catch2_test_device_select_api.cu
+  //!     :language: c++
+  //!     :dedent:
+  //!     :start-after: example-begin segmented-select-iseven
+  //!     :end-before: example-end segmented-select-iseven
+  //!
+  //! .. literalinclude:: ../../../cub/test/catch2_test_device_select_api.cu
+  //!     :language: c++
+  //!     :dedent:
+  //!     :start-after: example-begin segmented-select-flaggedif-inplace
+  //!     :end-before: example-end segmented-select-flaggedif-inplace
+  //!
+  //! @endrst
+  //!
+  //! @tparam IteratorT
+  //!   **[inferred]** Random-access iterator type for reading and writing selected items @iterator
+  //!
+  //! @tparam FlagIterator
+  //!   **[inferred]** Random-access input iterator type for reading selection flags @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam SelectOp
+  //!   **[inferred]** Selection operator type having member `bool operator()(const T &a)`
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in,out] d_data
+  //!   Pointer to the sequence of data items
+  //!
+  //! @param[in] d_flags
+  //!   Pointer to the input sequence of selection flags
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_data`)
+  //!
+  //! @param[in] select_op
+  //!   Unary selection operator
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename IteratorT, typename FlagIterator, typename NumSelectedIteratorT, typename SelectOp>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t FlaggedIf(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    IteratorT d_data,
+    FlagIterator d_flags,
+    NumSelectedIteratorT d_num_selected_out,
+    ::cuda::std::int64_t num_items,
+    SelectOp select_op,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::FlaggedIf");
+
+    using OffsetT    = ::cuda::std::int64_t; // Signed integer type for global offsets
+    using EqualityOp = NullType; // Equality operator (not used)
+
+    return DispatchSelectIf<IteratorT,
+                            FlagIterator,
+                            IteratorT,
+                            NumSelectedIteratorT,
+                            SelectOp,
+                            EqualityOp,
+                            OffsetT,
+                            SelectImpl::SelectPotentiallyInPlace>::
+      Dispatch(
+        d_temp_storage,
+        temp_storage_bytes,
+        d_data, // in
+        d_flags,
+        d_data, // out
+        d_num_selected_out,
+        select_op,
+        EqualityOp(),
+        num_items,
+        stream);
+  }
+
+  //! @rst
+  //! Given an input sequence ``d_in`` having runs of consecutive equal-valued keys,
+  //! only the first key from each run is selectively copied to ``d_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The ``==`` equality operator is used to determine whether keys are equivalent
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain their original relative ordering.
+  //! - | The range ``[d_out, d_out + *d_num_selected_out)`` shall not overlap
+  //!   | ``[d_in, d_in + num_items)`` nor ``d_num_selected_out`` in any way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>   // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;              // e.g., 8
+  //!    int  *d_in;                  // e.g., [0, 2, 2, 9, 5, 5, 5, 8]
+  //!    int  *d_out;                 // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_num_selected_out;    // e.g., [ ]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::Unique(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, d_num_selected_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::Unique(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, d_num_selected_out, num_items);
+  //!
+  //!    // d_out                 <-- [0, 2, 9, 5, 8]
+  //!    // d_num_selected_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected items @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output sequence of selected data items
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the output total number of items selected
+  //!   (i.e., length of `d_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename NumSelectedIteratorT>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t Unique(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    OutputIteratorT d_out,
+    NumSelectedIteratorT d_num_selected_out,
+    ::cuda::std::int64_t num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::Unique");
+
+    using OffsetT      = ::cuda::std::int64_t;
+    using FlagIterator = NullType*; // FlagT iterator type (not used)
+    using SelectOp     = NullType; // Selection op (not used)
+    using EqualityOp   = ::cuda::std::equal_to<>; // Default == operator
+
+    return DispatchSelectIf<
+      InputIteratorT,
+      FlagIterator,
+      OutputIteratorT,
+      NumSelectedIteratorT,
+      SelectOp,
+      EqualityOp,
+      OffsetT,
+      SelectImpl::Select>::Dispatch(d_temp_storage,
+                                    temp_storage_bytes,
+                                    d_in,
+                                    nullptr,
+                                    d_out,
+                                    d_num_selected_out,
+                                    SelectOp(),
+                                    EqualityOp(),
+                                    num_items,
+                                    stream);
+  }
+
+  //! @rst
+  //! Given an input sequence ``d_keys_in`` and ``d_values_in`` with runs of key-value pairs with consecutive
+  //! equal-valued keys, only the first key and its value from each run is selectively copied
+  //! to ``d_keys_out`` and ``d_values_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The user-provided equality operator, `equality_op`, is used to determine whether keys are equivalent
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain
+  //!   their original relative ordering.
+  //! - In-place operations are not supported. There must be no overlap between
+  //!   any of the provided ranges:
+  //!
+  //!   - ``[d_keys_in,          d_keys_in    + num_items)``
+  //!   - ``[d_keys_out,         d_keys_out   + *d_num_selected_out)``
+  //!   - ``[d_values_in,        d_values_in  + num_items)``
+  //!   - ``[d_values_out,       d_values_out + *d_num_selected_out)``
+  //!   - ``[d_num_selected_out, d_num_selected_out + 1)``
+  //!
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>   // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;              // e.g., 8
+  //!    int  *d_keys_in;             // e.g., [0, 2, 2, 9, 5, 5, 5, 8]
+  //!    int  *d_values_in;           // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
+  //!    int  *d_keys_out;            // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_values_out;          // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_num_selected_out;    // e.g., [ ]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::UniqueByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_values_in,
+  //!      d_keys_out, d_values_out, d_num_selected_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::UniqueByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_values_in,
+  //!      d_keys_out, d_values_out, d_num_selected_out, num_items);
+  //!
+  //!    // d_keys_out            <-- [0, 2, 9, 5, 8]
+  //!    // d_values_out          <-- [1, 2, 4, 5, 8]
+  //!    // d_num_selected_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam KeyInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input keys @iterator
+  //!
+  //! @tparam ValueInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input values @iterator
+  //!
+  //! @tparam KeyOutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected keys @iterator
+  //!
+  //! @tparam ValueOutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected values @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @tparam EqualityOpT
+  //!   **[inferred]** Type of equality_op
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_keys_in
+  //!   Pointer to the input sequence of keys
+  //!
+  //! @param[in] d_values_in
+  //!   Pointer to the input sequence of values
+  //!
+  //! @param[out] d_keys_out
+  //!   Pointer to the output sequence of selected keys
+  //!
+  //! @param[out] d_values_out
+  //!   Pointer to the output sequence of selected values
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the total number of items selected (i.e., length of `d_keys_out` or `d_values_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_keys_in` or `d_values_in`)
+  //!
+  //! @param[in] equality_op
+  //!   Binary predicate to determine equality
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename KeyInputIteratorT,
+            typename ValueInputIteratorT,
+            typename KeyOutputIteratorT,
+            typename ValueOutputIteratorT,
+            typename NumSelectedIteratorT,
+            typename NumItemsT,
+            typename EqualityOpT>
+  CUB_RUNTIME_FUNCTION __forceinline__ static //
+    ::cuda::std::enable_if_t< //
+      !::cuda::std::is_convertible_v<EqualityOpT, cudaStream_t>, //
+      cudaError_t>
+    UniqueByKey(
+      void* d_temp_storage,
+      size_t& temp_storage_bytes,
+      KeyInputIteratorT d_keys_in,
+      ValueInputIteratorT d_values_in,
+      KeyOutputIteratorT d_keys_out,
+      ValueOutputIteratorT d_values_out,
+      NumSelectedIteratorT d_num_selected_out,
+      NumItemsT num_items,
+      EqualityOpT equality_op,
+      cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceSelect::UniqueByKey");
+
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    return DispatchUniqueByKey<
+      KeyInputIteratorT,
+      ValueInputIteratorT,
+      KeyOutputIteratorT,
+      ValueOutputIteratorT,
+      NumSelectedIteratorT,
+      EqualityOpT,
+      OffsetT>::Dispatch(d_temp_storage,
+                         temp_storage_bytes,
+                         d_keys_in,
+                         d_values_in,
+                         d_keys_out,
+                         d_values_out,
+                         d_num_selected_out,
+                         equality_op,
+                         static_cast<OffsetT>(num_items),
+                         stream);
+  }
+
+  //! @rst
+  //! Given an input sequence ``d_keys_in`` and ``d_values_in`` with runs of key-value pairs with consecutive
+  //! equal-valued keys, only the first key and its value from each run is selectively copied
+  //! to ``d_keys_out`` and ``d_values_out``.
+  //! The total number of items selected is written to ``d_num_selected_out``.
+  //!
+  //! - The ``==`` equality operator is used to determine whether keys are equivalent
+  //! - Copies of the selected items are compacted into ``d_out`` and maintain
+  //!   their original relative ordering.
+  //! - In-place operations are not supported. There must be no overlap between
+  //!   any of the provided ranges:
+  //!
+  //!   - ``[d_keys_in,          d_keys_in    + num_items)``
+  //!   - ``[d_keys_out,         d_keys_out   + *d_num_selected_out)``
+  //!   - ``[d_values_in,        d_values_in  + num_items)``
+  //!   - ``[d_values_out,       d_values_out + *d_num_selected_out)``
+  //!   - ``[d_num_selected_out, d_num_selected_out + 1)``
+  //!
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the compaction of items selected from an ``int`` device vector.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>   // or equivalently <cub/device/device_select.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;              // e.g., 8
+  //!    int  *d_keys_in;             // e.g., [0, 2, 2, 9, 5, 5, 5, 8]
+  //!    int  *d_values_in;           // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
+  //!    int  *d_keys_out;            // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_values_out;          // e.g., [ ,  ,  ,  ,  ,  ,  ,  ]
+  //!    int  *d_num_selected_out;    // e.g., [ ]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceSelect::UniqueByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_values_in,
+  //!      d_keys_out, d_values_out, d_num_selected_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run selection
+  //!    cub::DeviceSelect::UniqueByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_values_in,
+  //!      d_keys_out, d_values_out, d_num_selected_out, num_items);
+  //!
+  //!    // d_keys_out            <-- [0, 2, 9, 5, 8]
+  //!    // d_values_out          <-- [1, 2, 4, 5, 8]
+  //!    // d_num_selected_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam KeyInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input keys @iterator
+  //!
+  //! @tparam ValueInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input values @iterator
+  //!
+  //! @tparam KeyOutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected keys @iterator
+  //!
+  //! @tparam ValueOutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing selected values @iterator
+  //!
+  //! @tparam NumSelectedIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of items selected @iterator
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_keys_in
+  //!   Pointer to the input sequence of keys
+  //!
+  //! @param[in] d_values_in
+  //!   Pointer to the input sequence of values
+  //!
+  //! @param[out] d_keys_out
+  //!   Pointer to the output sequence of selected keys
+  //!
+  //! @param[out] d_values_out
+  //!   Pointer to the output sequence of selected values
+  //!
+  //! @param[out] d_num_selected_out
+  //!   Pointer to the total number of items selected (i.e., length of `d_keys_out` or `d_values_out`)
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_keys_in` or `d_values_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename KeyInputIteratorT,
+            typename ValueInputIteratorT,
+            typename KeyOutputIteratorT,
+            typename ValueOutputIteratorT,
+            typename NumSelectedIteratorT,
+            typename NumItemsT>
+  CUB_RUNTIME_FUNCTION __forceinline__ static cudaError_t UniqueByKey(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    KeyInputIteratorT d_keys_in,
+    ValueInputIteratorT d_values_in,
+    KeyOutputIteratorT d_keys_out,
+    ValueOutputIteratorT d_values_out,
+    NumSelectedIteratorT d_num_selected_out,
+    NumItemsT num_items,
+    cudaStream_t stream = 0)
+  {
+    return UniqueByKey(
+      d_temp_storage,
+      temp_storage_bytes,
+      d_keys_in,
+      d_values_in,
+      d_keys_out,
+      d_values_out,
+      d_num_selected_out,
+      num_items,
+      ::cuda::std::equal_to<>{},
+      stream);
+  }
+};
+
+CUB_NAMESPACE_END