cuda-cccl 0.3.3__cp313-cp313-win_amd64.whl

cuda/cccl/headers/include/thrust/transform.h

@@ -0,0 +1,1045 @@
+/*
+ *  Copyright 2008-2013 NVIDIA Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*! \file thrust/transform.h
+ *  \brief Transforms input ranges using a function object
+ */
+
+#pragma once
+
+#include <thrust/detail/config.h>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+
+#include <thrust/detail/execution_policy.h>
+#include <thrust/iterator/iterator_traits.h>
+#include <thrust/system/detail/adl/transform.h>
+#include <thrust/system/detail/generic/select_system.h>
+#include <thrust/system/detail/generic/transform.h>
+#include <thrust/transform.h>
+
+#include <cuda/std/iterator>
+
+THRUST_NAMESPACE_BEGIN
+
+/*! \addtogroup algorithms
+ */
+
+/*! \addtogroup transformations
+ *  \ingroup algorithms
+ *  \{
+ */
+
+//! This version of \p transform applies a unary function to each element  of an input sequence and stores the result in
+//! the corresponding position in an output sequence. Specifically, for each iterator <tt>i</tt> in the range [\p first,
+//! \p last) the operation <tt>op(*i)</tt> is performed and the result is assigned to <tt>*o</tt>, where <tt>o</tt> is
+//! the corresponding output iterator in the range [\p result, \p result + (\p last - \p first) ). The input and output
+//! sequences may coincide, resulting in an in-place transformation.
+//!
+//! The algorithm's execution is parallelized as determined by \p exec.
+//!
+//! \param exec The execution policy to use for parallelization.
+//! \param first The beginning of the input sequence.
+//! \param last The end of the input sequence.
+//! \param result The beginning of the output sequence.
+//! \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+//! deprecated.
+//! \return The end of the output sequence.
+//!
+//! \tparam DerivedPolicy The name of the derived execution policy.
+//! \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator's \c value_type is convertible to \c UnaryFunction's argument type. \tparam
+//! OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+//! Iterator</a>.
+//! \tparam UnaryFunction is a unary function type which's return type is convertible to \c OutputIterator's \c
+//! value_type.
+//!
+//! \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+//! result + (last - first))</tt> otherwise.
+//!
+//! The following code snippet demonstrates how to use \p transform to negate a range in-place using the \p thrust::host
+//! execution policy for parallelization:
+//!
+//! \code
+//! #include <thrust/transform.h>
+//! #include <thrust/functional.h>
+//! #include <thrust/execution_policy.h>
+//! ...
+//!
+//! int data[10] = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+//!
+//! ::cuda::std::negate<int> op;
+//! thrust::transform(thrust::host, data, data + 10, data, op); // in-place transformation
+//!
+//! // data is now {5, 0, -2, 3, -2, -4, 0, 1, -2, -8};
+//! \endcode
+//!
+//! @rst
+//! Some backends of transform may take advantage knowing if the transformation operation supports
+//! :ref:`copyable arguments <address-stability>`.
+//! @endrst
+//!
+//! \see https://en.cppreference.com/w/cpp/algorithm/transform
+_CCCL_EXEC_CHECK_DISABLE
+template <typename DerivedPolicy, typename InputIterator, typename OutputIterator, typename UnaryFunction>
+_CCCL_HOST_DEVICE OutputIterator transform(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  OutputIterator result,
+  UnaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform");
+  using thrust::system::detail::generic::transform;
+  return transform(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, last, result, op);
+}
+
+//! This version of \p transform applies a unary function to each element of an input sequence and stores the result in
+//! the corresponding position in an output sequence. Specifically, for each iterator <tt>i</tt> in the range [\p first,
+//! \p last) the operation <tt>op(*i)</tt> is performed and the result is assigned to <tt>*o</tt>, where <tt>o</tt> is
+//! the corresponding output iterator in the range [\p result, \p result + (\p last - \p first) ). The input and output
+//! sequences may coincide, resulting in an in-place transformation.
+//!
+//! \param first The beginning of the input sequence.
+//! \param last The end of the input sequence.
+//! \param result The beginning of the output sequence.
+//! \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+//! deprecated.
+//! \return The end of the output sequence.
+//!
+//! \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator's \c value_type is convertible to \c UnaryFunction's argument type.
+//! \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+//! Iterator</a>.
+//! \tparam UnaryFunction is a unary function type which's return type is convertible to \c OutputIterator's \c
+//! value_type.
+//!
+//!  \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+//! result + (last - first))</tt> otherwise.
+//!
+//!  The following code snippet demonstrates how to use \p transform
+//!
+//!  \code
+//!  #include <thrust/transform.h>
+//!  #include <thrust/functional.h>
+//!
+//!  int data[10] = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+//!
+//!  ::cuda::std::negate<int> op;
+//!  thrust::transform(data, data + 10, data, op); // in-place transformation
+//!
+//!  // data is now {5, 0, -2, 3, -2, -4, 0, 1, -2, -8};
+//!  \endcode
+//!
+//! @rst
+//! Some backends of transform may take advantage knowing if the transformation operation supports
+//! :ref:`copyable arguments <address-stability>`.
+//! @endrst
+//!
+//!  \see https://en.cppreference.com/w/cpp/algorithm/transform
+template <typename InputIterator, typename OutputIterator, typename UnaryFunction>
+OutputIterator transform(InputIterator first, InputIterator last, OutputIterator result, UnaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform");
+  using thrust::system::detail::generic::select_system;
+
+  using System1 = typename thrust::iterator_system<InputIterator>::type;
+  using System2 = typename thrust::iterator_system<OutputIterator>::type;
+
+  System1 system1;
+  System2 system2;
+
+  return thrust::transform(select_system(system1, system2), first, last, result, op);
+}
+
+//! This version of \p transform applies a binary function to each pair of elements from two input sequences and stores
+//! the result in the corresponding position in an output sequence. Specifically, for each iterator <tt>i</tt> in the
+//! range [\p first1, \p last1) and <tt>j = first + (i - first1)</tt> in the range [\p first2, \p last2) the operation
+//! <tt>op(*i,*j)</tt> is performed and the result is assigned to <tt>*o</tt>, where <tt>o</tt> is the corresponding
+//! output iterator in the range [\p result, \p result + (\p last - \p first) ). The input and output sequences may
+//! coincide, resulting in an in-place transformation.
+//!
+//! The algorithm's execution is parallelized as determined by \p exec.
+//!
+//! \param exec The execution policy to use for parallelization.
+//! \param first1 The beginning of the first input sequence.
+//! \param last1 The end of the first input sequence.
+//! \param first2 The beginning of the second input sequence.
+//! \param result The beginning of the output sequence.
+//! \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+//! deprecated.
+//! \return The end of the output sequence.
+//!
+//! \tparam DerivedPolicy The name of the derived execution policy.
+//! \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator1's \c value_type is convertible to \c BinaryFunction's first argument type.
+//! \tparam InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator2's \c value_type is convertible to \c BinaryFunction's second argument type.
+//! \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+//! Iterator</a>.
+//! \tparam BinaryFunction is a binary function type which's return type is convertible to \c OutputIterator's \c
+//! value_type.
+//!
+//! \pre \p first1 may equal \p result, but the range <tt>[first1, last1)</tt> shall not overlap the range <tt>[result,
+//! result + (last1 - first1))</tt> otherwise. \pre \p first2 may equal \p result, but the range <tt>[first2, first2 +
+//! (last1 - first1))</tt> shall not overlap the range <tt>[result, result + (last1 - first1))</tt> otherwise.
+//!
+//! The following code snippet demonstrates how to use \p transform to compute the sum of two ranges using the \p
+//! thrust::host execution policy for parallelization:
+//!
+//! \code
+//! #include <thrust/transform.h>
+//! #include <thrust/functional.h>
+//! #include <thrust/execution_policy.h>
+//! ...
+//!
+//! int input1[6] = {-5,  0,  2,  3,  2,  4};
+//! int input2[6] = { 3,  6, -2,  1,  2,  3};
+//! int output[6];
+//!
+//! ::cuda::std::plus<int> op;
+//! thrust::transform(thrust::host, input1, input1 + 6, input2, output, op);
+//!
+//! // output is now {-2,  6,  0,  4,  4,  7};
+//! \endcode
+//!
+//! @rst
+//! Some backends of transform may take advantage knowing if the transformation operation supports
+//! :ref:`copyable arguments <address-stability>`.
+//! @endrst
+//!
+//! \see https://en.cppreference.com/w/cpp/algorithm/transform
+_CCCL_EXEC_CHECK_DISABLE
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator,
+          typename BinaryFunction>
+_CCCL_HOST_DEVICE OutputIterator transform(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first1,
+  InputIterator1 last1,
+  InputIterator2 first2,
+  OutputIterator result,
+  BinaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform");
+  using thrust::system::detail::generic::transform;
+  return transform(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first1, last1, first2, result, op);
+}
+
+//! This version of \p transform applies a binary function to each pair of elements from two input sequences and stores
+//! the result in the corresponding position in an output sequence. Specifically, for each iterator <tt>i</tt> in the
+//! range [\p first1, \p last1) and <tt>j = first + (i - first1)</tt> in the range [\p first2, \p last2) the operation
+//! <tt>op(*i,*j)</tt> is performed and the result is assigned to <tt>*o</tt>,  where <tt>o</tt> is the corresponding
+//! output iterator in the range [\p result, \p result + (\p last - \p first) ). The input and output sequences may
+//! coincide, resulting in an in-place transformation.
+//!
+//! \param first1 The beginning of the first input sequence.
+//! \param last1 The end of the first input sequence.
+//! \param first2 The beginning of the second input sequence.
+//! \param result The beginning of the output sequence.
+//! \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+//! deprecated.
+//! \return The end of the output sequence.
+//!
+//! \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator1's \c value_type is convertible to \c BinaryFunction's first argument type.
+//! \tparam InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+//! Iterator</a> and \c InputIterator2's \c value_type is convertible to \c BinaryFunction's second argument type.
+//! \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+//! Iterator</a>.
+//! \tparam BinaryFunction is a binary function type which's return type is convertible to \c OutputIterator's \c
+//! value_type.
+//!
+//! \pre \p first1 may equal \p result, but the range <tt>[first1, last1)</tt> shall not overlap the range <tt>[result,
+//! result + (last1 - first1))</tt> otherwise. \pre \p first2 may equal \p result, but the range <tt>[first2, first2 +
+//! (last1 - first1))</tt> shall not overlap the range <tt>[result, result + (last1 - first1))</tt> otherwise.
+//!
+//!  The following code snippet demonstrates how to use \p transform
+//!
+//! \code
+//! #include <thrust/transform.h>
+//! #include <thrust/functional.h>
+//!
+//! int input1[6] = {-5,  0,  2,  3,  2,  4};
+//! int input2[6] = { 3,  6, -2,  1,  2,  3};
+//! int output[6];
+//!
+//! ::cuda::std::plus<int> op;
+//! thrust::transform(input1, input1 + 6, input2, output, op);
+//!
+//! // output is now {-2,  6,  0,  4,  4,  7};
+//! \endcode
+//!
+//! @rst
+//! Some backends of transform may take advantage knowing if the transformation operation supports
+//! :ref:`copyable arguments <address-stability>`.
+//! @endrst
+//!
+//! \see https://en.cppreference.com/w/cpp/algorithm/transform
+template <typename InputIterator1, typename InputIterator2, typename OutputIterator, typename BinaryFunction>
+OutputIterator
+transform(InputIterator1 first1, InputIterator1 last1, InputIterator2 first2, OutputIterator result, BinaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform");
+  using thrust::system::detail::generic::select_system;
+
+  using System1 = typename thrust::iterator_system<InputIterator1>::type;
+  using System2 = typename thrust::iterator_system<InputIterator2>::type;
+  using System3 = typename thrust::iterator_system<OutputIterator>::type;
+
+  System1 system1;
+  System2 system2;
+  System3 system3;
+
+  return thrust::transform(select_system(system1, system2, system3), first1, last1, first2, result, op);
+}
+
+/*! This version of \p transform_if conditionally applies a unary function
+ *  to each element of an input sequence and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in the input sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first, last)</tt> the
+ *  predicate <tt>pred(*i)</tt> is evaluated. If this predicate
+ *  evaluates to \c true, the result of <tt>op(*i)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last - first) )</tt>. Otherwise, <tt>op(*i)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+ *  deprecated.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, and \c InputIterator's \c value_type is convertible to \c Predicate's argument type, and \c
+ * InputIterator's \c value_type is convertible to \c UnaryFunction's argument type. \tparam ForwardIterator is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward Iterator</a>.
+ *  \tparam UnaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+ * result + (last - first))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if to negate the odd-valued
+ *  elements of a range using the \p thrust::host execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *
+ *  int data[10]    = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+ *
+ *  struct is_odd
+ *  {
+ *    __host__ __device__
+ *    bool operator()(int x)
+ *    {
+ *      return x % 2;
+ *    }
+ *  };
+ *
+ *  ::cuda::std::negate<int> op;
+ *
+ *  // negate odd elements
+ *  thrust::transform_if(thrust::host, data, data + 10, data, op, is_odd()); // in-place transformation
+ *
+ *  // data is now {5, 0, 2, 3, 2, 4, 0, 1, 2, 8};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+_CCCL_EXEC_CHECK_DISABLE
+template <typename DerivedPolicy,
+          typename InputIterator,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::transform_if;
+  return transform_if(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, last, result, op, pred);
+}
+
+/*! This version of \p transform_if conditionally applies a unary function
+ *  to each element of an input sequence and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in the input sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first, last)</tt> the
+ *  predicate <tt>pred(*i)</tt> is evaluated. If this predicate
+ *  evaluates to \c true, the result of <tt>op(*i)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last - first) )</tt>. Otherwise, <tt>op(*i)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+ *  deprecated.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation
+ *  is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, and \c InputIterator's \c value_type is convertible to \c Predicate's argument type, and \c
+ * InputIterator's \c value_type is convertible to \c UnaryFunction's argument type. \tparam ForwardIterator is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward Iterator</a>.
+ *  \tparam UnaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+ * result + (last - first))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *
+ *  int data[10]    = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+ *
+ *  struct is_odd
+ *  {
+ *    __host__ __device__
+ *    bool operator()(int x)
+ *    {
+ *      return x % 2;
+ *    }
+ *  };
+ *
+ *  ::cuda::std::negate<int> op;
+ *
+ *  // negate odd elements
+ *  thrust::transform_if(data, data + 10, data, op, is_odd()); // in-place transformation
+ *
+ *  // data is now {5, 0, 2, 3, 2, 4, 0, 1, 2, 8};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+template <typename InputIterator, typename ForwardIterator, typename UnaryFunction, typename Predicate>
+ForwardIterator
+transform_if(InputIterator first, InputIterator last, ForwardIterator result, UnaryFunction op, Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::select_system;
+
+  using System1 = typename thrust::iterator_system<InputIterator>::type;
+  using System2 = typename thrust::iterator_system<ForwardIterator>::type;
+
+  System1 system1;
+  System2 system2;
+
+  return thrust::transform_if(select_system(system1, system2), first, last, result, op, pred);
+}
+
+/*! This version of \p transform_if conditionally applies a unary function
+ *  to each element of an input sequence and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in a stencil sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first, last)</tt> the
+ *  predicate <tt>pred(*s)</tt> is evaluated, where <tt>s</tt> is the corresponding input
+ *  iterator in the range <tt>[stencil, stencil + (last - first) )</tt>. If this predicate
+ *  evaluates to \c true, the result of <tt>op(*i)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last - first) )</tt>. Otherwise, <tt>op(*i)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param stencil The beginning of the stencil sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+ *  deprecated.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation
+ *  is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator1's \c value_type is convertible to \c UnaryFunction's argument type. \tparam
+ * InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>
+ *                         and \c InputIterator2's \c value_type is convertible to \c Predicate's argument type.
+ *  \tparam ForwardIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward
+ * Iterator</a>.
+ *  \tparam UnaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+ * result + (last - first))</tt> otherwise. \pre \p stencil may equal \p result, but the range <tt>[stencil, stencil +
+ * (last - first))</tt> shall not overlap the range <tt>[result, result + (last - first))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *
+ *  int data[10]    = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+ *  int stencil[10] = { 1, 0, 1,  0, 1, 0, 1,  0, 1, 0};
+ *
+ *  ::cuda::std::negate<int> op;
+ *  ::cuda::std::identity identity;
+ *
+ *  thrust::transform_if(thrust::host, data, data + 10, stencil, data, op, identity); // in-place transformation
+ *
+ *  // data is now {5, 0, -2, -3, -2,  4, 0, -1, -2,  8};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+_CCCL_EXEC_CHECK_DISABLE
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first,
+  InputIterator1 last,
+  InputIterator2 stencil,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::transform_if;
+  return transform_if(
+    thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, last, stencil, result, op, pred);
+}
+
+/*! This version of \p transform_if conditionally applies a unary function
+ *  to each element of an input sequence and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in a stencil sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first, last)</tt> the
+ *  predicate <tt>pred(*s)</tt> is evaluated, where <tt>s</tt> is the corresponding input
+ *  iterator in the range <tt>[stencil, stencil + (last - first) )</tt>. If this predicate
+ *  evaluates to \c true, the result of <tt>op(*i)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last - first) )</tt>. Otherwise, <tt>op(*i)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param stencil The beginning of the stencil sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param op The transformation operation. Relying on the address of op's arguments in its implementation is
+ *  deprecated.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation
+ *  is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator1's \c value_type is convertible to \c UnaryFunction's argument type. \tparam
+ * InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>
+ *                         and \c InputIterator2's \c value_type is convertible to \c Predicate's argument type.
+ *  \tparam ForwardIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward
+ * Iterator</a>.
+ *  \tparam UnaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first may equal \p result, but the range <tt>[first, last)</tt> shall not overlap the range <tt>[result,
+ * result + (last - first))</tt> otherwise. \pre \p stencil may equal \p result, but the range <tt>[stencil, stencil +
+ * (last - first))</tt> shall not overlap the range <tt>[result, result + (last - first))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *
+ *  int data[10]    = {-5, 0, 2, -3, 2, 4, 0, -1, 2, 8};
+ *  int stencil[10] = { 1, 0, 1,  0, 1, 0, 1,  0, 1, 0};
+ *
+ *  ::cuda::std::negate<int> op;
+ *  ::cuda::std::identity identity;
+ *
+ *  thrust::transform_if(data, data + 10, stencil, data, op, identity); // in-place transformation
+ *
+ *  // data is now {5, 0, -2, -3, -2,  4, 0, -1, -2,  8};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+ForwardIterator transform_if(
+  InputIterator1 first,
+  InputIterator1 last,
+  InputIterator2 stencil,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::select_system;
+
+  using System1 = typename thrust::iterator_system<InputIterator1>::type;
+  using System2 = typename thrust::iterator_system<InputIterator2>::type;
+  using System3 = typename thrust::iterator_system<ForwardIterator>::type;
+
+  System1 system1;
+  System2 system2;
+  System3 system3;
+
+  return thrust::transform_if(select_system(system1, system2, system3), first, last, stencil, result, op, pred);
+}
+
+/*! This version of \p transform_if conditionally applies a binary function
+ *  to each pair of elements from two input sequences and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in a stencil sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first1, last1)</tt> and
+ *  <tt>j = first2 + (i - first1)</tt> in the range <tt>[first2, first2 + (last1 - first1) )</tt>,
+ *  the predicate <tt>pred(*s)</tt> is evaluated, where <tt>s</tt> is the corresponding input
+ *  iterator in the range <tt>[stencil, stencil + (last1 - first1) )</tt>. If this predicate
+ *  evaluates to \c true, the result of <tt>binary_op(*i,*j)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last1 - first1) )</tt>. Otherwise, <tt>binary_op(*i,*j)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first1 The beginning of the first input sequence.
+ *  \param last1 The end of the first input sequence.
+ *  \param first2 The beginning of the second input sequence.
+ *  \param stencil The beginning of the stencil sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param binary_op The transformation operation.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation
+ *  is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator1's \c value_type is convertible to \c BinaryFunction's first argument type.
+ *  \tparam InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator2's \c value_type is convertible to \c BinaryFunction's second argument type.
+ *  \tparam ForwardIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward
+ * Iterator</a>.
+ *  \tparam BinaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first1 may equal \p result, but the range <tt>[first1, last1)</tt> shall not overlap the range <tt>[result,
+ * result + (last1 - first1))</tt> otherwise. \pre \p first2 may equal \p result, but the range <tt>[first2, first2 +
+ * (last1 - first1))</tt> shall not overlap the range <tt>[result, result + (last1 - first1))</tt> otherwise. \pre \p
+ * stencil may equal \p result, but the range <tt>[stencil, stencil + (last1 - first1))</tt> shall not overlap the range
+ * <tt>[result, result + (last1 - first1))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *
+ *  int input1[6]  = {-5,  0,  2,  3,  2,  4};
+ *  int input2[6]  = { 3,  6, -2,  1,  2,  3};
+ *  int stencil[8] = { 1,  0,  1,  0,  1,  0};
+ *  int output[6];
+ *
+ *  ::cuda::std::plus<int> op;
+ *  ::cuda::std::identity identity;
+ *
+ *  thrust::transform_if(thrust::host, input1, input1 + 6, input2, stencil, output, op, identity);
+ *
+ *  // output is now {-2,  0,  0,  3,  4,  4};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+_CCCL_EXEC_CHECK_DISABLE
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename InputIterator3,
+          typename ForwardIterator,
+          typename BinaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first1,
+  InputIterator1 last1,
+  InputIterator2 first2,
+  InputIterator3 stencil,
+  ForwardIterator result,
+  BinaryFunction binary_op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::transform_if;
+  return transform_if(
+    thrust::detail::derived_cast(thrust::detail::strip_const(exec)),
+    first1,
+    last1,
+    first2,
+    stencil,
+    result,
+    binary_op,
+    pred);
+}
+
+/*! This version of \p transform_if conditionally applies a binary function
+ *  to each pair of elements from two input sequences and stores the result in the corresponding
+ *  position in an output sequence if the corresponding position in a stencil sequence
+ *  satisfies a predicate. Otherwise, the corresponding position in the
+ *  output sequence is not modified.
+ *
+ *  Specifically, for each iterator <tt>i</tt> in the range <tt>[first1, last1)</tt> and
+ *  <tt>j = first2 + (i - first1)</tt> in the range <tt>[first2, first2 + (last1 - first1) )</tt>,
+ *  the predicate <tt>pred(*s)</tt> is evaluated, where <tt>s</tt> is the corresponding input
+ *  iterator in the range <tt>[stencil, stencil + (last1 - first1) )</tt>. If this predicate
+ *  evaluates to \c true, the result of <tt>binary_op(*i,*j)</tt> is assigned to <tt>*o</tt>,
+ *  where <tt>o</tt> is the corresponding output iterator in the range
+ *  <tt>[result, result + (last1 - first1) )</tt>. Otherwise, <tt>binary_op(*i,*j)</tt> is
+ *  not evaluated and no assignment occurs. The input and output sequences may coincide,
+ *  resulting in an in-place transformation.
+ *
+ *  \param first1 The beginning of the first input sequence.
+ *  \param last1 The end of the first input sequence.
+ *  \param first2 The beginning of the second input sequence.
+ *  \param stencil The beginning of the stencil sequence.
+ *  \param result The beginning of the output sequence.
+ *  \param binary_op The transformation operation. Relying on the address of binary_op's arguments in its implementation
+ *  is deprecated.
+ *  \param pred The predicate operation. Relying on the address of pred's arguments in its implementation
+ *  is deprecated.
+ *  \return The end of the output sequence.
+ *
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator1's \c value_type is convertible to \c BinaryFunction's first argument type.
+ *  \tparam InputIterator2 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator2's \c value_type is convertible to \c BinaryFunction's second argument type.
+ *  \tparam ForwardIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/forward_iterator">Forward
+ * Iterator</a>.
+ *  \tparam BinaryFunction The function's return type must be convertible to \c OutputIterator's \c value_type.
+ *  \tparam Predicate is a model of <a href="https://en.cppreference.com/w/cpp/concepts/predicate">Predicate</a>.
+ *
+ *  \pre \p first1 may equal \p result, but the range <tt>[first1, last1)</tt> shall not overlap the range <tt>[result,
+ * result + (last1 - first1))</tt> otherwise. \pre \p first2 may equal \p result, but the range <tt>[first2, first2 +
+ * (last1 - first1))</tt> shall not overlap the range <tt>[result, result + (last1 - first1))</tt> otherwise. \pre \p
+ * stencil may equal \p result, but the range <tt>[stencil, stencil + (last1 - first1))</tt> shall not overlap the range
+ * <tt>[result, result + (last1 - first1))</tt> otherwise.
+ *
+ *  The following code snippet demonstrates how to use \p transform_if:
+ *
+ *  \code
+ *  #include <thrust/transform.h>
+ *  #include <thrust/functional.h>
+ *
+ *  int input1[6]  = {-5,  0,  2,  3,  2,  4};
+ *  int input2[6]  = { 3,  6, -2,  1,  2,  3};
+ *  int stencil[8] = { 1,  0,  1,  0,  1,  0};
+ *  int output[6];
+ *
+ *  ::cuda::std::plus<int> op;
+ *  ::cuda::std::identity identity;
+ *
+ *  thrust::transform_if(input1, input1 + 6, input2, stencil, output, op, identity);
+ *
+ *  // output is now {-2,  0,  0,  3,  4,  4};
+ *  \endcode
+ *
+ *  \see thrust::transform
+ */
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename InputIterator3,
+          typename ForwardIterator,
+          typename BinaryFunction,
+          typename Predicate>
+ForwardIterator transform_if(
+  InputIterator1 first1,
+  InputIterator1 last1,
+  InputIterator2 first2,
+  InputIterator3 stencil,
+  ForwardIterator result,
+  BinaryFunction binary_op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if");
+  using thrust::system::detail::generic::select_system;
+
+  using System1 = typename thrust::iterator_system<InputIterator1>::type;
+  using System2 = typename thrust::iterator_system<InputIterator2>::type;
+  using System3 = typename thrust::iterator_system<InputIterator3>::type;
+  using System4 = typename thrust::iterator_system<ForwardIterator>::type;
+
+  System1 system1;
+  System2 system2;
+  System3 system3;
+  System4 system4;
+
+  return thrust::transform_if(
+    select_system(system1, system2, system3, system4), first1, last1, first2, stencil, result, binary_op, pred);
+}
+
+//! Like \ref transform, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename DerivedPolicy, typename InputIterator, typename OutputIterator, typename UnaryFunction>
+_CCCL_HOST_DEVICE OutputIterator transform_n(
+  const detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  ::cuda::std::iter_difference_t<InputIterator> count,
+  OutputIterator result,
+  UnaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_n");
+  using thrust::system::detail::generic::transform_n;
+  return transform_n(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, count, result, op);
+}
+
+//! Like \ref transform, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename InputIterator, typename OutputIterator, typename UnaryFunction>
+OutputIterator transform_n(
+  InputIterator first, ::cuda::std::iter_difference_t<InputIterator> count, OutputIterator result, UnaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_n");
+  iterator_system_t<InputIterator> system1;
+  iterator_system_t<OutputIterator> system2;
+  using thrust::system::detail::generic::select_system;
+  return thrust::transform_n(select_system(system1, system2), first, count, result, op);
+}
+
+//! Like \ref transform, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator,
+          typename BinaryFunction>
+_CCCL_HOST_DEVICE OutputIterator transform_n(
+  const detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first1,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 first2,
+  OutputIterator result,
+  BinaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_n");
+  using thrust::system::detail::generic::transform_n;
+  return transform_n(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first1, count, first2, result, op);
+}
+
+//! Like \ref transform, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename InputIterator1, typename InputIterator2, typename OutputIterator, typename BinaryFunction>
+OutputIterator transform_n(
+  InputIterator1 first1,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 first2,
+  OutputIterator result,
+  BinaryFunction op)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_n");
+  iterator_system_t<InputIterator1> system1;
+  iterator_system_t<InputIterator2> system2;
+  iterator_system_t<OutputIterator> system3;
+  using thrust::system::detail::generic::select_system;
+  return thrust::transform_n(select_system(system1, system2, system3), first1, count, first2, result, op);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename DerivedPolicy,
+          typename InputIterator,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if_n(
+  const detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  ::cuda::std::iter_difference_t<InputIterator> count,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  using thrust::system::detail::generic::transform_if_n;
+  return transform_if_n(thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, count, result, op, pred);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename InputIterator, typename ForwardIterator, typename UnaryFunction, typename Predicate>
+ForwardIterator transform_if_n(
+  InputIterator first,
+  ::cuda::std::iter_difference_t<InputIterator> count,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  iterator_system_t<InputIterator> system1;
+  iterator_system_t<ForwardIterator> system2;
+  using thrust::system::detail::generic::select_system;
+  return thrust::transform_if_n(select_system(system1, system2), first, count, result, op, pred);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if_n(
+  const detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 stencil,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  using thrust::system::detail::generic::transform_if_n;
+  return transform_if_n(
+    thrust::detail::derived_cast(thrust::detail::strip_const(exec)), first, count, stencil, result, op, pred);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename ForwardIterator,
+          typename UnaryFunction,
+          typename Predicate>
+ForwardIterator transform_if_n(
+  InputIterator1 first,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 stencil,
+  ForwardIterator result,
+  UnaryFunction op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  iterator_system_t<InputIterator1> system1;
+  iterator_system_t<InputIterator2> system2;
+  iterator_system_t<ForwardIterator> system3;
+  using thrust::system::detail::generic::select_system;
+  return thrust::transform_if_n(select_system(system1, system2, system3), first, count, stencil, result, op, pred);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename InputIterator3,
+          typename ForwardIterator,
+          typename BinaryFunction,
+          typename Predicate>
+_CCCL_HOST_DEVICE ForwardIterator transform_if_n(
+  const detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 first1,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 first2,
+  InputIterator3 stencil,
+  ForwardIterator result,
+  BinaryFunction binary_op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  using thrust::system::detail::generic::transform_if_n;
+  return transform_if_n(
+    thrust::detail::derived_cast(thrust::detail::strip_const(exec)),
+    first1,
+    count,
+    first2,
+    stencil,
+    result,
+    binary_op,
+    pred);
+}
+
+//! Like \ref transform_if, but uses an element count instead of an iterator to the last element of the input sequence.
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename InputIterator3,
+          typename ForwardIterator,
+          typename BinaryFunction,
+          typename Predicate>
+ForwardIterator transform_if_n(
+  InputIterator1 first1,
+  ::cuda::std::iter_difference_t<InputIterator1> count,
+  InputIterator2 first2,
+  InputIterator3 stencil,
+  ForwardIterator result,
+  BinaryFunction binary_op,
+  Predicate pred)
+{
+  _CCCL_NVTX_RANGE_SCOPE("thrust::transform_if_n");
+  iterator_system_t<InputIterator1> system1;
+  iterator_system_t<InputIterator2> system2;
+  iterator_system_t<InputIterator3> system3;
+  iterator_system_t<ForwardIterator> system4;
+  using thrust::system::detail::generic::select_system;
+  return thrust::transform_if_n(
+    select_system(system1, system2, system3, system4), first1, count, first2, stencil, result, binary_op, pred);
+}
+
+/*! \} // end transformations
+ */
+
+THRUST_NAMESPACE_END