EvoScientist 0.0.1.dev2__py3-none-any.whl

EvoScientist/skills/ml-paper-writing/templates/icml2026/example_paper.tex

@@ -0,0 +1,662 @@
+%%%%%%%% ICML 2026 EXAMPLE LATEX SUBMISSION FILE %%%%%%%%%%%%%%%%%
+
+\documentclass{article}
+
+% Recommended, but optional, packages for figures and better typesetting:
+\usepackage{microtype}
+\usepackage{graphicx}
+\usepackage{subcaption}
+\usepackage{booktabs} % for professional tables
+
+% hyperref makes hyperlinks in the resulting PDF.
+% If your build breaks (sometimes temporarily if a hyperlink spans a page)
+% please comment out the following usepackage line and replace
+% \usepackage{icml2026} with \usepackage[nohyperref]{icml2026} above.
+\usepackage{hyperref}
+
+
+% Attempt to make hyperref and algorithmic work together better:
+\newcommand{\theHalgorithm}{\arabic{algorithm}}
+
+% Use the following line for the initial blind version submitted for review:
+\usepackage{icml2026}
+
+% For preprint, use
+% \usepackage[preprint]{icml2026}
+
+% If accepted, instead use the following line for the camera-ready submission:
+% \usepackage[accepted]{icml2026}
+
+\usepackage{amsmath}
+\usepackage{amssymb}
+\usepackage{mathtools}
+\usepackage{amsthm}
+
+
+% if you use cleveref..
+\usepackage[capitalize,noabbrev]{cleveref}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% THEOREMS
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\theoremstyle{plain}
+\newtheorem{theorem}{Theorem}[section]
+\newtheorem{proposition}[theorem]{Proposition}
+\newtheorem{lemma}[theorem]{Lemma}
+\newtheorem{corollary}[theorem]{Corollary}
+\theoremstyle{definition}
+\newtheorem{definition}[theorem]{Definition}
+\newtheorem{assumption}[theorem]{Assumption}
+\theoremstyle{remark}
+\newtheorem{remark}[theorem]{Remark}
+
+% Todonotes is useful during development; simply uncomment the next line
+%    and comment out the line below the next line to turn off comments
+%\usepackage[disable,textsize=tiny]{todonotes}
+\usepackage[textsize=tiny]{todonotes}
+
+% The \icmltitle you define below is probably too long as a header.
+% Therefore, a short form for the running title is supplied here:
+\icmltitlerunning{Submission and Formatting Instructions for ICML 2026}
+
+\begin{document}
+
+\twocolumn[
+  \icmltitle{Submission and Formatting Instructions for \\
+    International Conference on Machine Learning (ICML 2026)}
+
+  % It is OKAY to include author information, even for blind submissions: the
+  % style file will automatically remove it for you unless you've provided
+  % the [accepted] option to the icml2026 package.
+
+  % List of affiliations: The first argument should be a (short) identifier you
+  % will use later to specify author affiliations Academic affiliations
+  % should list Department, University, City, Region, Country Industry
+  % affiliations should list Company, City, Region, Country
+
+  % You can specify symbols, otherwise they are numbered in order. Ideally, you
+  % should not use this facility. Affiliations will be numbered in order of
+  % appearance and this is the preferred way.
+  \icmlsetsymbol{equal}{*}
+
+  \begin{icmlauthorlist}
+    \icmlauthor{Firstname1 Lastname1}{equal,yyy}
+    \icmlauthor{Firstname2 Lastname2}{equal,yyy,comp}
+    \icmlauthor{Firstname3 Lastname3}{comp}
+    \icmlauthor{Firstname4 Lastname4}{sch}
+    \icmlauthor{Firstname5 Lastname5}{yyy}
+    \icmlauthor{Firstname6 Lastname6}{sch,yyy,comp}
+    \icmlauthor{Firstname7 Lastname7}{comp}
+    %\icmlauthor{}{sch}
+    \icmlauthor{Firstname8 Lastname8}{sch}
+    \icmlauthor{Firstname8 Lastname8}{yyy,comp}
+    %\icmlauthor{}{sch}
+    %\icmlauthor{}{sch}
+  \end{icmlauthorlist}
+
+  \icmlaffiliation{yyy}{Department of XXX, University of YYY, Location, Country}
+  \icmlaffiliation{comp}{Company Name, Location, Country}
+  \icmlaffiliation{sch}{School of ZZZ, Institute of WWW, Location, Country}
+
+  \icmlcorrespondingauthor{Firstname1 Lastname1}{first1.last1@xxx.edu}
+  \icmlcorrespondingauthor{Firstname2 Lastname2}{first2.last2@www.uk}
+
+  % You may provide any keywords that you find helpful for describing your
+  % paper; these are used to populate the "keywords" metadata in the PDF but
+  % will not be shown in the document
+  \icmlkeywords{Machine Learning, ICML}
+
+  \vskip 0.3in
+]
+
+% this must go after the closing bracket ] following \twocolumn[ ...
+
+% This command actually creates the footnote in the first column listing the
+% affiliations and the copyright notice. The command takes one argument, which
+% is text to display at the start of the footnote. The \icmlEqualContribution
+% command is standard text for equal contribution. Remove it (just {}) if you
+% do not need this facility.
+
+% Use ONE of the following lines. DO NOT remove the command.
+% If you have no special notice, KEEP empty braces:
+\printAffiliationsAndNotice{}  % no special notice (required even if empty)
+% Or, if applicable, use the standard equal contribution text:
+% \printAffiliationsAndNotice{\icmlEqualContribution}
+
+\begin{abstract}
+  This document provides a basic paper template and submission guidelines.
+  Abstracts must be a single paragraph, ideally between 4--6 sentences long.
+  Gross violations will trigger corrections at the camera-ready phase.
+\end{abstract}
+
+\section{Electronic Submission}
+
+Submission to ICML 2026 will be entirely electronic, via a web site
+(not email). Information about the submission process and \LaTeX\ templates
+are available on the conference web site at:
+\begin{center}
+  \texttt{http://icml.cc/}
+\end{center}
+
+The guidelines below will be enforced for initial submissions and
+camera-ready copies. Here is a brief summary:
+\begin{itemize}
+  \item Submissions must be in PDF\@.
+  \item If your paper has appendices, submit the appendix together with the
+        main body and the references \textbf{as a single file}. Reviewers will not
+        look for appendices as a separate PDF file. So if you submit such an extra
+        file, reviewers will very likely miss it.
+  \item Page limit: The main body of the paper has to be fitted to 8 pages,
+        excluding references and appendices; the space for the latter two is not
+        limited in pages, but the total file size may not exceed 10MB. For the
+        final version of the paper, authors can add one extra page to the main
+        body.
+  \item \textbf{Do not include author information or acknowledgements} in your
+        initial submission.
+  \item Your paper should be in \textbf{10 point Times font}.
+  \item Make sure your PDF file only uses Type-1 fonts.
+  \item Place figure captions \emph{under} the figure (and omit titles from
+        inside the graphic file itself). Place table captions \emph{over} the
+        table.
+  \item References must include page numbers whenever possible and be as
+        complete as possible. Place multiple citations in chronological order.
+  \item Do not alter the style template; in particular, do not compress the
+        paper format by reducing the vertical spaces.
+  \item Keep your abstract brief and self-contained, one paragraph and roughly
+        4--6 sentences. Gross violations will require correction at the
+        camera-ready phase. The title should have content words capitalized.
+\end{itemize}
+
+\subsection{Submitting Papers}
+
+\textbf{Anonymous Submission:} ICML uses double-blind review: no identifying
+author information may appear on the title page or in the paper
+itself. \cref{author info} gives further details.
+
+\medskip
+
+Authors must provide their manuscripts in \textbf{PDF} format.
+Furthermore, please make sure that files contain only embedded Type-1 fonts
+(e.g.,~using the program \texttt{pdffonts} in linux or using
+File/DocumentProperties/Fonts in Acrobat). Other fonts (like Type-3)
+might come from graphics files imported into the document.
+
+Authors using \textbf{Word} must convert their document to PDF\@. Most
+of the latest versions of Word have the facility to do this
+automatically. Submissions will not be accepted in Word format or any
+format other than PDF\@. Really. We're not joking. Don't send Word.
+
+Those who use \textbf{\LaTeX} should avoid including Type-3 fonts.
+Those using \texttt{latex} and \texttt{dvips} may need the following
+two commands:
+
+{\footnotesize
+\begin{verbatim}
+dvips -Ppdf -tletter -G0 -o paper.ps paper.dvi
+ps2pdf paper.ps
+\end{verbatim}}
+It is a zero following the ``-G'', which tells dvips to use
+the config.pdf file. Newer \TeX\ distributions don't always need this
+option.
+
+Using \texttt{pdflatex} rather than \texttt{latex}, often gives better
+results. This program avoids the Type-3 font problem, and supports more
+advanced features in the \texttt{microtype} package.
+
+\textbf{Graphics files} should be a reasonable size, and included from
+an appropriate format. Use vector formats (.eps/.pdf) for plots,
+lossless bitmap formats (.png) for raster graphics with sharp lines, and
+jpeg for photo-like images.
+
+The style file uses the \texttt{hyperref} package to make clickable
+links in documents. If this causes problems for you, add
+\texttt{nohyperref} as one of the options to the \texttt{icml2026}
+usepackage statement.
+
+\subsection{Submitting Final Camera-Ready Copy}
+
+The final versions of papers accepted for publication should follow the
+same format and naming convention as initial submissions, except that
+author information (names and affiliations) should be given. See
+\cref{final author} for formatting instructions.
+
+The footnote, ``Preliminary work. Under review by the International
+Conference on Machine Learning (ICML). Do not distribute.'' must be
+modified to ``\textit{Proceedings of the
+  $\mathit{43}^{rd}$ International Conference on Machine Learning},
+Seoul, South Korea, PMLR 306, 2026.
+Copyright 2026 by the author(s).''
+
+For those using the \textbf{\LaTeX} style file, this change (and others) is
+handled automatically by simply changing
+$\mathtt{\backslash usepackage\{icml2026\}}$ to
+$$\mathtt{\backslash usepackage[accepted]\{icml2026\}}$$
+Authors using \textbf{Word} must edit the
+footnote on the first page of the document themselves.
+
+Camera-ready copies should have the title of the paper as running head
+on each page except the first one. The running title consists of a
+single line centered above a horizontal rule which is $1$~point thick.
+The running head should be centered, bold and in $9$~point type. The
+rule should be $10$~points above the main text. For those using the
+\textbf{\LaTeX} style file, the original title is automatically set as running
+head using the \texttt{fancyhdr} package which is included in the ICML
+2026 style file package. In case that the original title exceeds the
+size restrictions, a shorter form can be supplied by using
+
+\verb|\icmltitlerunning{...}|
+
+just before $\mathtt{\backslash begin\{document\}}$.
+Authors using \textbf{Word} must edit the header of the document themselves.
+
+\section{Format of the Paper}
+
+All submissions must follow the specified format.
+
+\subsection{Dimensions}
+
+The text of the paper should be formatted in two columns, with an
+overall width of 6.75~inches, height of 9.0~inches, and 0.25~inches
+between the columns. The left margin should be 0.75~inches and the top
+margin 1.0~inch (2.54~cm). The right and bottom margins will depend on
+whether you print on US letter or A4 paper, but all final versions
+must be produced for US letter size.
+Do not write anything on the margins.
+
+The paper body should be set in 10~point type with a vertical spacing
+of 11~points. Please use Times typeface throughout the text.
+
+\subsection{Title}
+
+The paper title should be set in 14~point bold type and centered
+between two horizontal rules that are 1~point thick, with 1.0~inch
+between the top rule and the top edge of the page. Capitalize the
+first letter of content words and put the rest of the title in lower
+case.
+You can use TeX math in the title (we suggest sparingly),
+but no custom macros, images, or other TeX commands.
+Please make sure that accents, special characters, etc., are entered using
+TeX commands and not using non-English characters.
+
+\subsection{Author Information for Submission}
+\label{author info}
+
+ICML uses double-blind review, so author information must not appear. If
+you are using \LaTeX\/ and the \texttt{icml2026.sty} file, use
+\verb+\icmlauthor{...}+ to specify authors and \verb+\icmlaffiliation{...}+
+to specify affiliations. (Read the TeX code used to produce this document for
+an example usage.) The author information will not be printed unless
+\texttt{accepted} is passed as an argument to the style file. Submissions that
+include the author information will not be reviewed.
+
+\subsubsection{Self-Citations}
+
+If you are citing published papers for which you are an author, refer
+to yourself in the third person. In particular, do not use phrases
+that reveal your identity (e.g., ``in previous work \cite{langley00}, we
+have shown \ldots'').
+
+Do not anonymize citations in the reference section. The only exception are manuscripts that are
+not yet published (e.g., under submission). If you choose to refer to
+such unpublished manuscripts \cite{anonymous}, anonymized copies have
+to be submitted
+as Supplementary Material via OpenReview\@. However, keep in mind that an ICML
+paper should be self contained and should contain sufficient detail
+for the reviewers to evaluate the work. In particular, reviewers are
+not required to look at the Supplementary Material when writing their
+review (they are not required to look at more than the first $8$ pages of the submitted document).
+
+\subsubsection{Camera-Ready Author Information}
+\label{final author}
+
+If a paper is accepted, a final camera-ready copy must be prepared.
+%
+For camera-ready papers, author information should start 0.3~inches below the
+bottom rule surrounding the title. The authors' names should appear in 10~point
+bold type, in a row, separated by white space, and centered. Author names should
+not be broken across lines. Unbolded superscripted numbers, starting 1, should
+be used to refer to affiliations.
+
+Affiliations should be numbered in the order of appearance. A single footnote
+block of text should be used to list all the affiliations. (Academic
+affiliations should list Department, University, City, State/Region, Country.
+Similarly for industrial affiliations.)
+
+Each distinct affiliations should be listed once. If an author has multiple
+affiliations, multiple superscripts should be placed after the name, separated
+by thin spaces. If the authors would like to highlight equal contribution by
+multiple first authors, those authors should have an asterisk placed after their
+name in superscript, and the term ``\textsuperscript{*}Equal contribution"
+should be placed in the footnote block ahead of the list of affiliations. A
+list of corresponding authors and their emails (in the format Full Name
+\textless{}email@domain.com\textgreater{}) can follow the list of affiliations.
+Ideally only one or two names should be listed.
+
+A sample file with author names is included in the ICML2026 style file
+package. Turn on the \texttt{[accepted]} option to the stylefile to
+see the names rendered. All of the guidelines above are implemented
+by the \LaTeX\ style file.
+
+\subsection{Abstract}
+
+The paper abstract should begin in the left column, 0.4~inches below the final
+address. The heading `Abstract' should be centered, bold, and in 11~point type.
+The abstract body should use 10~point type, with a vertical spacing of
+11~points, and should be indented 0.25~inches more than normal on left-hand and
+right-hand margins. Insert 0.4~inches of blank space after the body. Keep your
+abstract brief and self-contained, limiting it to one paragraph and roughly 4--6
+sentences. Gross violations will require correction at the camera-ready phase.
+
+\subsection{Partitioning the Text}
+
+You should organize your paper into sections and paragraphs to help readers
+place a structure on the material and understand its contributions.
+
+\subsubsection{Sections and Subsections}
+
+Section headings should be numbered, flush left, and set in 11~pt bold type
+with the content words capitalized. Leave 0.25~inches of space before the
+heading and 0.15~inches after the heading.
+
+Similarly, subsection headings should be numbered, flush left, and set in 10~pt
+bold type with the content words capitalized. Leave
+0.2~inches of space before the heading and 0.13~inches afterward.
+
+Finally, subsubsection headings should be numbered, flush left, and set in
+10~pt small caps with the content words capitalized. Leave
+0.18~inches of space before the heading and 0.1~inches after the heading.
+
+Please use no more than three levels of headings.
+
+\subsubsection{Paragraphs and Footnotes}
+
+Within each section or subsection, you should further partition the paper into
+paragraphs. Do not indent the first line of a given paragraph, but insert a
+blank line between succeeding ones.
+
+You can use footnotes\footnote{Footnotes should be complete sentences.}
+to provide readers with additional information about a topic without
+interrupting the flow of the paper. Indicate footnotes with a number in the
+text where the point is most relevant. Place the footnote in 9~point type at
+the bottom of the column in which it appears. Precede the first footnote in a
+column with a horizontal rule of 0.8~inches.\footnote{Multiple footnotes can
+  appear in each column, in the same order as they appear in the text,
+  but spread them across columns and pages if possible.}
+
+\begin{figure}[ht]
+  \vskip 0.2in
+  \begin{center}
+    \centerline{\includegraphics[width=\columnwidth]{icml_numpapers}}
+    \caption{
+      Historical locations and number of accepted papers for International
+      Machine Learning Conferences (ICML 1993 -- ICML 2008) and International
+      Workshops on Machine Learning (ML 1988 -- ML 1992). At the time this
+      figure was produced, the number of accepted papers for ICML 2008 was
+      unknown and instead estimated.
+    }
+    \label{icml-historical}
+  \end{center}
+\end{figure}
+
+\subsection{Figures}
+
+You may want to include figures in the paper to illustrate your approach and
+results. Such artwork should be centered, legible, and separated from the text.
+Lines should be dark and at least 0.5~points thick for purposes of
+reproduction, and text should not appear on a gray background.
+
+Label all distinct components of each figure. If the figure takes the form of a
+graph, then give a name for each axis and include a legend that briefly
+describes each curve. Do not include a title inside the figure; instead, the
+caption should serve this function.
+
+Number figures sequentially, placing the figure number and caption \emph{after}
+the graphics, with at least 0.1~inches of space before the caption and
+0.1~inches after it, as in \cref{icml-historical}. The figure caption should be
+set in 9~point type and centered unless it runs two or more lines, in which
+case it should be flush left. You may float figures to the top or bottom of a
+column, and you may set wide figures across both columns (use the environment
+\texttt{figure*} in \LaTeX). Always place two-column figures at the top or
+bottom of the page.
+
+\subsection{Algorithms}
+
+If you are using \LaTeX, please use the ``algorithm'' and ``algorithmic''
+environments to format pseudocode. These require the corresponding stylefiles,
+algorithm.sty and algorithmic.sty, which are supplied with this package.
+\cref{alg:example} shows an example.
+
+\begin{algorithm}[tb]
+  \caption{Bubble Sort}
+  \label{alg:example}
+  \begin{algorithmic}
+    \STATE {\bfseries Input:} data $x_i$, size $m$
+    \REPEAT
+    \STATE Initialize $noChange = true$.
+    \FOR{$i=1$ {\bfseries to} $m-1$}
+    \IF{$x_i > x_{i+1}$}
+    \STATE Swap $x_i$ and $x_{i+1}$
+    \STATE $noChange = false$
+    \ENDIF
+    \ENDFOR
+    \UNTIL{$noChange$ is $true$}
+  \end{algorithmic}
+\end{algorithm}
+
+
+\subsection{Tables}
+
+You may also want to include tables that summarize material. Like figures,
+these should be centered, legible, and numbered consecutively. However, place
+the title \emph{above} the table with at least 0.1~inches of space before the
+title and the same after it, as in \cref{sample-table}. The table title should
+be set in 9~point type and centered unless it runs two or more lines, in which
+case it should be flush left.
+
+% Note use of \abovespace and \belowspace to get reasonable spacing
+% above and below tabular lines.
+
+\begin{table}[t]
+  \caption{Classification accuracies for naive Bayes and flexible
+    Bayes on various data sets.}
+  \label{sample-table}
+  \begin{center}
+    \begin{small}
+      \begin{sc}
+        \begin{tabular}{lcccr}
+          \toprule
+          Data set  & Naive         & Flexible      & Better?  \\
+          \midrule
+          Breast    & 95.9$\pm$ 0.2 & 96.7$\pm$ 0.2 & $\surd$  \\
+          Cleveland & 83.3$\pm$ 0.6 & 80.0$\pm$ 0.6 & $\times$ \\
+          Glass2    & 61.9$\pm$ 1.4 & 83.8$\pm$ 0.7 & $\surd$  \\
+          Credit    & 74.8$\pm$ 0.5 & 78.3$\pm$ 0.6 &          \\
+          Horse     & 73.3$\pm$ 0.9 & 69.7$\pm$ 1.0 & $\times$ \\
+          Meta      & 67.1$\pm$ 0.6 & 76.5$\pm$ 0.5 & $\surd$  \\
+          Pima      & 75.1$\pm$ 0.6 & 73.9$\pm$ 0.5 &          \\
+          Vehicle   & 44.9$\pm$ 0.6 & 61.5$\pm$ 0.4 & $\surd$  \\
+          \bottomrule
+        \end{tabular}
+      \end{sc}
+    \end{small}
+  \end{center}
+  \vskip -0.1in
+\end{table}
+
+Tables contain textual material, whereas figures contain graphical material.
+Specify the contents of each row and column in the table's topmost row. Again,
+you may float tables to a column's top or bottom, and set wide tables across
+both columns. Place two-column tables at the top or bottom of the page.
+
+\subsection{Theorems and Such}
+The preferred way is to number definitions, propositions, lemmas, etc.
+consecutively, within sections, as shown below.
+\begin{definition}
+  \label{def:inj}
+  A function $f:X \to Y$ is injective if for any $x,y\in X$ different, $f(x)\ne
+    f(y)$.
+\end{definition}
+Using \cref{def:inj} we immediate get the following result:
+\begin{proposition}
+  If $f$ is injective mapping a set $X$ to another set $Y$,
+  the cardinality of $Y$ is at least as large as that of $X$
+\end{proposition}
+\begin{proof}
+  Left as an exercise to the reader.
+\end{proof}
+\cref{lem:usefullemma} stated next will prove to be useful.
+\begin{lemma}
+  \label{lem:usefullemma}
+  For any $f:X \to Y$ and $g:Y\to Z$ injective functions, $f \circ g$ is
+  injective.
+\end{lemma}
+\begin{theorem}
+  \label{thm:bigtheorem}
+  If $f:X\to Y$ is bijective, the cardinality of $X$ and $Y$ are the same.
+\end{theorem}
+An easy corollary of \cref{thm:bigtheorem} is the following:
+\begin{corollary}
+  If $f:X\to Y$ is bijective,
+  the cardinality of $X$ is at least as large as that of $Y$.
+\end{corollary}
+\begin{assumption}
+  The set $X$ is finite.
+  \label{ass:xfinite}
+\end{assumption}
+\begin{remark}
+  According to some, it is only the finite case (cf. \cref{ass:xfinite}) that
+  is interesting.
+\end{remark}
+%restatable
+
+\subsection{Citations and References}
+
+Please use APA reference format regardless of your formatter or word processor.
+If you rely on the \LaTeX\/ bibliographic facility, use \texttt{natbib.sty} and
+\texttt{icml2026.bst} included in the style-file package to obtain this format.
+
+Citations within the text should include the authors' last names and year. If
+the authors' names are included in the sentence, place only the year in
+parentheses, for example when referencing Arthur Samuel's pioneering work
+\yrcite{Samuel59}. Otherwise place the entire reference in parentheses with the
+authors and year separated by a comma \cite{Samuel59}. List multiple references
+separated by semicolons \cite{kearns89,Samuel59,mitchell80}. Use the `et~al.'
+construct only for citations with three or more authors or after listing all
+authors to a publication in an earlier reference \cite{MachineLearningI}.
+
+Authors should cite their own work in the third person in the initial version
+of their paper submitted for blind review. Please refer to \cref{author info}
+for detailed instructions on how to cite your own papers.
+
+Use an unnumbered first-level section heading for the references, and use a
+hanging indent style, with the first line of the reference flush against the
+left margin and subsequent lines indented by 10 points. The references at the
+end of this document give examples for journal articles \cite{Samuel59},
+conference publications \cite{langley00}, book chapters \cite{Newell81}, books
+\cite{DudaHart2nd}, edited volumes \cite{MachineLearningI}, technical reports
+\cite{mitchell80}, and dissertations \cite{kearns89}.
+
+Alphabetize references by the surnames of the first authors, with single author
+entries preceding multiple author entries. Order references for the same
+authors by year of publication, with the earliest first. Make sure that each
+reference includes all relevant information (e.g., page numbers).
+
+Please put some effort into making references complete, presentable, and
+consistent, e.g. use the actual current name of authors. If using bibtex,
+please protect capital letters of names and abbreviations in titles, for
+example, use \{B\}ayesian or \{L\}ipschitz in your .bib file.
+
+\section*{Accessibility}
+
+Authors are kindly asked to make their submissions as accessible as possible
+for everyone including people with disabilities and sensory or neurological
+differences. Tips of how to achieve this and what to pay attention to will be
+provided on the conference website \url{http://icml.cc/}.
+
+\section*{Software and Data}
+
+If a paper is accepted, we strongly encourage the publication of software and
+data with the camera-ready version of the paper whenever appropriate. This can
+be done by including a URL in the camera-ready copy. However, \textbf{do not}
+include URLs that reveal your institution or identity in your submission for
+review. Instead, provide an anonymous URL or upload the material as
+``Supplementary Material'' into the OpenReview reviewing system. Note that
+reviewers are not required to look at this material when writing their review.
+
+% Acknowledgements should only appear in the accepted version.
+\section*{Acknowledgements}
+
+\textbf{Do not} include acknowledgements in the initial version of the paper
+submitted for blind review.
+
+If a paper is accepted, the final camera-ready version can (and usually should)
+include acknowledgements.  Such acknowledgements should be placed at the end of
+the section, in an unnumbered section that does not count towards the paper
+page limit. Typically, this will include thanks to reviewers who gave useful
+comments, to colleagues who contributed to the ideas, and to funding agencies
+and corporate sponsors that provided financial support.
+
+\section*{Impact Statement}
+
+Authors are \textbf{required} to include a statement of the potential broader
+impact of their work, including its ethical aspects and future societal
+consequences. This statement should be in an unnumbered section at the end of
+the paper (co-located with Acknowledgements -- the two may appear in either
+order, but both must be before References), and does not count toward the paper
+page limit. In many cases, where the ethical impacts and expected societal
+implications are those that are well established when advancing the field of
+Machine Learning, substantial discussion is not required, and a simple
+statement such as the following will suffice:
+
+``This paper presents work whose goal is to advance the field of Machine
+Learning. There are many potential societal consequences of our work, none
+which we feel must be specifically highlighted here.''
+
+The above statement can be used verbatim in such cases, but we encourage
+authors to think about whether there is content which does warrant further
+discussion, as this statement will be apparent if the paper is later flagged
+for ethics review.
+
+% In the unusual situation where you want a paper to appear in the
+% references without citing it in the main text, use \nocite
+\nocite{langley00}
+
+\bibliography{example_paper}
+\bibliographystyle{icml2026}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% APPENDIX
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newpage
+\appendix
+\onecolumn
+\section{You \emph{can} have an appendix here.}
+
+You can have as much text here as you want. The main body must be at most $8$
+pages long. For the final version, one more page can be added. If you want, you
+can use an appendix like this one.
+
+The $\mathtt{\backslash onecolumn}$ command above can be kept in place if you
+prefer a one-column appendix, or can be removed if you prefer a two-column
+appendix.  Apart from this possible change, the style (font size, spacing,
+margins, page numbering, etc.) should be kept the same as the main body.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\end{document}
+
+% This document was modified from the file originally made available by
+% Pat Langley and Andrea Danyluk for ICML-2K. This version was created
+% by Iain Murray in 2018, and modified by Alexandre Bouchard in
+% 2019 and 2021 and by Csaba Szepesvari, Gang Niu and Sivan Sabato in 2022.
+% Modified again in 2023 and 2024 by Sivan Sabato and Jonathan Scarlett.
+% Previous contributors include Dan Roy, Lise Getoor and Tobias
+% Scheffer, which was slightly modified from the 2010 version by
+% Thorsten Joachims & Johannes Fuernkranz, slightly modified from the
+% 2009 version by Kiri Wagstaff and Sam Roweis's 2008 version, which is
+% slightly modified from Prasad Tadepalli's 2007 version which is a
+% lightly changed version of the previous year's version by Andrew
+% Moore, which was in turn edited from those of Kristian Kersting and
+% Codrina Lauth. Alex Smola contributed to the algorithmic style files.