ysk-server-shared 1.1.0 → 1.1.9

package/locales/zh-CN/validators.json

@@ -5,7 +5,8 @@
   "tab": {
     "nodes": "节点",
     "disk": "磁盘",
-    "about": "说明"
+    "about": "说明",
+    "stack": "Software"
   },
   "empty": {
     "title": "尚未建立验证者节点",
@@ -23,7 +24,18 @@
     "autoClear": "磁盘危急时自动清空最大的已停止实例（默认关闭）",
     "autoClearRisk": "Destructive: the largest stopped instance is deleted without a further prompt. Default is off. Check audit / logs after it fires.",
     "autoClearConfirmTitle": "Enable auto-clear?",
-    "autoClearC1": "When disk is critical, the largest stopped instance is deleted without asking again."
+    "autoClearC1": "When disk is critical, the largest stopped instance is deleted without asking again.",
+    "fsUsed": "Filesystem used",
+    "leftoverTitle": "Leftover data ({{count}})",
+    "leftoverDesc": "Directories under the validators root that are not a store instance. Remove only after you confirm they are unused.",
+    "leftoverRemove": "Remove",
+    "leftoverRemoveTitle": "Delete leftover validator data?",
+    "leftoverRemoveDesc": "Permanently delete {{path}} from disk. This is not a listed node.",
+    "autoClearThreshold": "Trigger: filesystem use at or above 85%.",
+    "autoClearCandidate": "Current candidate: {{id}}",
+    "autoClearNone": "No stopped instance is a candidate right now.",
+    "browseRoot": "Open in file browser",
+    "leftoverEmpty": "No leftover instance directories"
   },
   "chain": {
     "eth": "Ethereum",
@@ -58,6 +70,14 @@
     "validator-ready": "验证者就绪",
     "rpc": "RPC"
   },
+  "profileHelp": {
+    "title": "配置档说明",
+    "desc": "创建向导第三步的四个选项，主要差别是磁盘预算与用途。各链建议容量会在向导显示；面板不会保管质押私钥。",
+    "minimal": "占用磁盘最少。适合测试网或先试安装。不是完整历史，也不适合作为正式验证者。",
+    "pruned": "保留近期链状态，删除过旧区块数据（Pruned）。磁盘多于精简、少于完整节点。适合长期跟随链头。",
+    "validatorReady": "预留较大磁盘，供日后以验证者身份出块。密钥须自行离线生成；离线或设置错误可能损失质押金。",
+    "rpc": "供本机或其他服务查询链数据。RPC 默认只监听 127.0.0.1，不会公开到互联网。"
+  },
   "col": {
     "id": "标识",
     "chain": "链",
@@ -133,7 +153,8 @@
     "snapshotNear": "已清空 NEAR 数据；compose 会重新用官方 genesis 与 epoch sync 初始化",
     "nativePrune": "已执行客户端原生清理命令",
     "dryDelete": "删除属预演。真正套用须 --execute 与 YSK_EXECUTE=1。",
-    "deleted": "已删除节点"
+    "deleted": "已删除节点",
+    "leftoverRemoved": "Removed leftover {{path}}"
   },
   "create": "建立节点",
   "wizard": {
@@ -142,7 +163,8 @@
     "next": "下一步",
     "install": "安装",
     "mainnetWarn": "主网需要大量可用磁盘（ETH 常达 800 GiB 或以上）。建议先用测试网。",
-    "mainnetAck": "我明白磁盘与罚没风险，仍要建立主网节点。",
+    "mainnetAck": "确认建立主网节点。我已了解主网会占用大量磁盘；若以验证者身份出块，离线或设置错误可能损失质押金。",
+    "lowDiskAcked": "可用磁盘低于建议值。你已确认仍要建立；空间不足时同步可能中断。",
     "heavyWarn": "此链负载很重（大量磁盘与高 IOPS）。Solana 主网通常需要 2 TiB 或以上。",
     "memory": "内存上限（例如 4g）",
     "cpus": "CPU 上限（例如 2.0）",
@@ -162,7 +184,26 @@
     "installConfirmTitle": "Install this node?",
     "installConfirmDesc": "{{chain}} · {{network}} · {{profile}}. About {{disk}} of disk. The image pull can take a long time.",
     "installC1": "Several gigabytes of images may be downloaded.",
-    "installC2": "You can cancel the panel task; already-pulled images are not deleted automatically."
+    "installC2": "You can cancel the panel task; already-pulled images are not deleted automatically.",
+    "diskNeedNetwork": "Default (Minimal) for this network needs about {{need}} · free {{free}}",
+    "diskShortDetail": "Need {{need}} · free {{free}} · short {{short}}",
+    "needCustomPath": "Enter an absolute data path",
+    "previewId": "Node id",
+    "previewCompose": "Compose project",
+    "profileSeeAbout": "What each profile means is on the About tab.",
+    "dockerAbout": "Docker Engine is required to install and start nodes.",
+    "dockerAboutOk": "Docker Engine is installed.",
+    "dockerAboutMissing": "Docker Engine is not installed. Open Docker to install it.",
+    "rewriteCompose": "Rewrite compose",
+    "rewriteComposeTitle": "Rewrite compose.yml from the current adapter?",
+    "rewriteComposeDesc": "Overwrites the generated compose for {{id}} using the shipped flags for this chain.",
+    "chainMeta": "{{disk}} min · {{clients}} clients",
+    "profileHint": {
+      "minimal": "Smallest sync — light disk, not for staking.",
+      "pruned": "Keeps recent history only (Pruned). Smaller than archive, still usable for RPC.",
+      "validator-ready": "Sized for a staking validator. Needs more disk than Minimal.",
+      "rpc": "Public RPC node — not a staking validator."
+    }
   },
   "actions": {
     "detail": "详情",
@@ -259,8 +300,26 @@
   "state": {
     "unknown": "未知",
     "stopped": "已停止",
+    "starting": "启动中",
     "running": "运行中",
     "syncing": "同步中",
     "error": "错误"
+  },
+  "software": {
+    "engine": "Docker Engine",
+    "engineDesc": "Validator nodes run as Compose projects. Install Docker here if it is missing. Image prune stays on the Docker page.",
+    "client": "Client",
+    "image": "Image",
+    "present": "Local",
+    "local": "Pulled",
+    "missing": "Not pulled",
+    "size": "Size",
+    "usedBy": "Used by",
+    "unused": "No instance",
+    "pull": "Pull",
+    "pulling": "Pull {{ref}}",
+    "empty": "No pinned client images",
+    "emptyDesc": "The catalog is empty. This should not happen.",
+    "daemonDown": "Docker Engine is not running"
   }
 }

package/locales/zh-CN/vnc.json

@@ -251,5 +251,12 @@
   "deleteKeepUserWarn": "The Linux user will stay on the host as an orphan. You must clean it up later.",
   "bindRfbLine": "RFB {{bind}} :{{port}}",
   "bindNovncLine": "noVNC 127.0.0.1:{{port}}",
-  "bindNovncHint": "noVNC listens on localhost. The desktop is reached through this panel, not the public internet, unless RFB bind is all interfaces."
+  "bindNovncHint": "noVNC listens on localhost. The desktop is reached through this panel, not the public internet, unless RFB bind is all interfaces.",
+  "hostnameBroken": "This host cannot resolve its own hostname ({{hostname}}). Session start will fail.",
+  "hostnameFix": "Write hostname to /etc/hosts",
+  "hostnameFixTitle": "Append this line to /etc/hosts?",
+  "hostnameFixDesc": "{{line}}",
+  "hostnameFixDone": "Hostname /etc/hosts updated",
+  "startAfterCreateBlocked": "Disabled until the hostname resolves",
+  "hostnameBrokenIdle": "Hostname {{hostname}} does not resolve on this host. Fix /etc/hosts before you create a session."
 }

package/locales/zh-HK/agents.json

@@ -3,6 +3,8 @@
   "body": "OpenClaw／Hermes／IonClaw 的安裝與監督；所有工具呼叫須經允許清單與審批。",
   "status": {
     "running": "運行中",
+    "activating": "啟動中",
+    "stuck": "啟動卡住",
     "connected": "上線",
     "registered": "僅登記",
     "stale": "逾時",
@@ -13,6 +15,9 @@
     "unknown": "未探測",
     "fallback": "未知"
   },
+  "activatingStuckHint": "啟動超過 5 分鐘，已當失敗。請查 journal。",
+  "noOnlineAgents": "無上線代理",
+  "journal": "journal",
   "liveN": "{{count}} 上線",
   "registeredOnly": "僅登記",
   "awaitProbe": "待探測",

package/locales/zh-HK/apache.json

@@ -1,6 +1,7 @@
 {
   "pageDesc": "Apache 站點（PHP 專案 + 獨立站）",
   "pillSites": "{{count}} 站點",
+  "pillSitesSplit": "{{n}} 站點 · 殘留 {{leftover}}",
   "listTitle": "站點（{{count}}）",
   "emptyTitle": "未有站點",
   "createSite": "+ 建立站點",
@@ -8,6 +9,7 @@
   "editTitle": "編輯站點",
   "deleteTitle": "刪除站點？",
   "deleteDesc": "刪除此 Apache 站點？",
+  "stopSites": "將有 {{n}} 個站點停止回應 HTTP。",
   "colServerName": "域名",
   "colSource": "來源",
   "colKind": "類型",

package/locales/zh-HK/backups.json

@@ -114,8 +114,24 @@
   "cancel": "取消",
   "deleteFailed": "刪除失敗",
   "deleted": "已刪除",
-  "deleteTitle": "刪除備份檔？",
-  "deleteDesc": "永久刪除 {{name}}",
+  "deleteTitle": "移至回收區？",
+  "deleteDesc": "將 {{name}} 移至回收區。7 日後永久刪除。",
+  "tabTrash": "回收區",
+  "trashTitle": "回收區（{{count}}）",
+  "trashSub": "刪除的備份會在此保留 7 日，之後永久移除。",
+  "trashEmpty": "回收區是空的",
+  "trashEmptyDesc": "刪除的備份檔會在此保留 7 日。",
+  "trashRestore": "還原",
+  "trashPurge": "永久刪除",
+  "trashEmptyAll": "清空回收區",
+  "trashExpires": "到期 {{at}}",
+  "trashPurgeTitle": "永久刪除此備份？",
+  "trashPurgeDesc": "永久刪除 {{name}}。無法復原。",
+  "trashEmptyTitle": "清空回收區？",
+  "trashEmptyDescConfirm": "永久刪除 {{count}} 個備份檔。請輸入件數確認。",
+  "trashRestored": "已從回收區還原",
+  "trashPurged": "已永久刪除",
+  "trashedOk": "已移至回收區",
   "resticSafeTitle": "Restic 還原到安全目錄？",
   "resticSafeDesc": "還原 {{snapshot}} 到專案 {{project}} 的 .Restic-還原-* 目錄",
   "resticRestoreDone": "Restic 還原完成",

package/locales/zh-HK/btTracker.json

@@ -50,8 +50,11 @@
   "statsTorrents": "Torrent",
   "statsLibrary": "資料庫",
   "statsLibraryHint": "面板資料庫／檔案分享的 Torrent 列",
-  "statsTrackerLeftover": "另計（非資料庫 swarm）",
-  "statsTrackerLeftoverHint": "本機 Tracker 有 announce、但不在 Torrent 資料庫列的雜湊。額外 announce URL 見 Tracker 分頁。",
+  "statsTrackerLeftover": "Tracker 雜湊不在資料庫",
+  "statsTrackerLeftoverHint": "本機 Tracker 有 announce、但不在 Torrent 資料庫列的雜湊。清單見 Tracker 分頁。",
+  "leftoverHashesTitle": "Tracker 殘留雜湊",
+  "publicHostMissingLive": "Tracker 已在聽，但未設定公開 announce 主機。外網對等節點找不到此種子。",
+  "leftoverHashesHint": "唯讀。這些 announce 不是資料庫或分享列。",
   "statsPeers": "同行",
   "statsAnnounces": "Announce",
   "statsAnnouncesHint": "Tracker 行程收到的 announce 次數",

package/locales/zh-HK/cdn.json

@@ -32,7 +32,8 @@
   "statNodes": "節點",
   "hitNoStats": "尚無邊緣統計",
   "loopbackOriginBlocked": "不會把回環 origin {{url}} 寫到遠端邊緣。請先改成可達的 origin。",
-  "applyFailedHint": "套用失敗 — 見下方備註",
+  "applyFailedHint": "套用失敗",
+  "applyFailedNoNote": "沒有存下失敗原因。請再套用一次以記錄錯誤。",
   "applyStatus": {
     "draft": "草稿",
     "planned": "已計劃",
@@ -42,6 +43,7 @@
     "partial": "部分成功"
   },
   "statSites": "站點",
+  "statApplyFailed": "套用失敗",
   "pillNodesSites": "節點 {{n}} · 站點 {{s}}",
   "statOnline": "線上",
   "statOnlineOf": "線上 {{n}}/{{total}}",

package/locales/zh-HK/common.json

@@ -30,6 +30,7 @@
   "unavailable": "目前不可用",
   "retry": "再試",
   "success": "成功",
+  "ok": "正常",
   "failed": "失敗",
   "blocked": "無法執行",
   "status": "狀態",

package/locales/zh-HK/cron.json

@@ -76,6 +76,7 @@
   "hostNoYsk": "尚未安裝或無 YSK 項目",
   "pressInstall": "有已登記但未寫入系統的工作 — 請按「安裝到系統」。",
   "jobsTab": "工作 ({{count}})",
+  "jobsTabPending": "工作 ({{count}}) · 待安裝 {{pending}}",
   "registeredJobs": "已登記工作 ({{count}})",
   "jobsSub": "管理檔項目 · 改動後需「安裝到系統」才生效",
   "addJob": "+ 新增工作",
@@ -136,6 +137,8 @@
   "noHostJobs": "此範圍沒有 crontab 工作",
   "hostPartial": "無法完整讀取所有用戶 crontab（需要 root）",
   "pendingInstall": "待安裝到系統（{{count}}）",
+  "pendingStale": "已 {{days}} 日未寫入系統 crontab，不會執行。",
+  "willNotRun": "未寫入系統 crontab — 不會執行。",
   "hourRange": "小時必須介乎 0–23。",
   "minuteRange": "分鐘必須介乎 0–59。",
   "hoursCommon": "常用小時",

package/locales/zh-HK/dashboard.json

@@ -44,10 +44,12 @@
   "readinessCheck": "就緒檢查：",
   "prodOk": "可作生產",
   "notFullyReady": "尚未完全就緒",
+  "readinessBlocked": "有 {{n}} 項阻擋",
   "modeScore": "模式 {{mode}} · 分數 {{ready}}/{{total}}",
   "mode": {
     "degraded": "降級",
-    "production_capable": "可生產",
+    "production_capable": "EXECUTE＋root",
+    "blocked": "有阻擋",
     "normal": "正常"
   },
   "details": "詳情",

package/locales/zh-HK/db.json

@@ -146,6 +146,23 @@
     "title": "叢集",
     "description": "計劃 → 寫管理檔 → 套用 → 探測 → 分發到對等節點／機群。預設預覽試行（不會重啟引擎）。",
     "redirectedFromCluster": "你由 /cluster 轉到此處。這是資料庫叢集分頁。",
+    "notApplied": "尚未套用",
+    "plannedAt": "建立於 {{when}}",
+    "clearStalePlans": "清過期計劃",
+    "clearStalePlansTitle": "刪除過期計劃？",
+    "clearStalePlansDesc": "將刪除 {{n}} 個超過 7 日的計劃／草稿登記。不會套用或推送，亦不改系統設定。",
+    "landingTitle": "資料庫叢集",
+    "landingDesc": "本機已計劃與已套用的資料庫叢集總覽。請開啟引擎頁建立或套用。",
+    "landingNoneInstalled": "未安裝 MySQL、MariaDB、PostgreSQL 或 Redis。請先安裝其中一個引擎。",
+    "openEngine": "開啟 {{engine}}",
+    "overviewPill": "叢集 {{n}}",
+    "enginesInstalled": "引擎",
+    "plannedCount": "已計劃",
+    "overviewList": "叢集（{{count}}）",
+    "overviewEmpty": "尚未有叢集登記。",
+    "engine": "引擎",
+    "kind": "類型",
+    "members": "成員",
     "kindGalera": "簡易 Galera",
     "kindMysqlReplica": "MySQL 主從複製",
     "kindPgReplica": "PostgreSQL 串流複製",

package/locales/zh-HK/dns.json

@@ -209,10 +209,14 @@
   "healthHealPdns": "修復 PowerDNS 綁定",
   "healNeedInstall": "尚未安裝 PowerDNS — 請先到軟件分頁安裝",
   "applyNeedService": "DNS 服務未運行 — 請先啟動或安裝再寫入／套用",
+  "goStartService": "去啟動 DNS 服務",
+  "startBindHint": "若啟動後仍未監聽，多半是 53 埠被 systemd-resolved 佔用。請先按下方「修復綁定」再啟動。",
   "deleteZoneNeedName": "刪除此區域 — 需輸入區域名稱確認",
   "healthHealPdnsHint": "將 local-address 設為公網 IP，避免同 systemd-resolved 搶 0.0.0.0:53",
   "healthHealPdnsOk": "PowerDNS 已綁 {{ip}} 並嘗試啟動",
   "healthHealPdnsFailed": "PowerDNS 修復失敗",
+  "startProbeFailed": "啟動後無法再探測 DNS 健康",
+  "startNotListening": "PowerDNS 啟動已回報，但 53 埠未在答",
   "aboutTitle": "DNS 使用要點",
   "aboutSub": "區域為主；記錄／叢集／DNSSEC 要先選域名。",
   "aboutZonesTitle": "區域與域名範圍",

package/locales/zh-HK/docker.json

@@ -59,6 +59,7 @@
     "down": "已停止",
     "running": "運行中",
     "exited": "已結束",
+    "exitedCode": "已結束（{{n}}）",
     "restarting": "重啟中",
     "restartingCount": "重啟中 · {{n}} 次",
     "paused": "已暫停",

package/locales/zh-HK/email.json

@@ -111,6 +111,8 @@
   "deliverabilityChecks": "檢查項",
   "healthUnchecked": "尚未檢查",
   "healthUncheckedHint": "尚未實測 DNS／PTR／25 埠。",
+  "healthPartialScore": "部分評分 {{n}}/100（僅 DNS）",
+  "healthPartialHint": "只計了 DNS 清單 — 即時檢查與黑名單尚未測。",
   "deliverabilityScore": "送達能力檢查包",
   "opendkimNoReload": "OpenDKIM 不支援重載 — 更改金鑰或對照表後請用重啟。",
   "opendkimNoReloadTitle": "此堆疊不支援 systemctl reload opendkim",
@@ -452,6 +454,7 @@
   "deleteMailboxC3": "系統 Dovecot／Postfix 可能仍需另行清理",
   "deleteAliasTitle": "刪除別名／轉寄？",
   "deleteAliasDesc": "將刪除 {{source}}。",
+  "deleteImpact": "{{mailboxes}} 個信箱 · {{records}} 筆 DNS 紀錄 · {{aliases}} 個別名",
   "deleteDomainC1": "所有信箱與別名",
   "deleteDomainC2": "控制面 DKIM、DNS 建議與旗標",
   "deleteDomainC3": "本機 dataDir/email 目錄（若存在）",

package/locales/zh-HK/files.json

@@ -102,6 +102,7 @@
   "webdavAfterEnable": "啟用 WebDAV 並簽發權杖後才可用。",
   "webdavOn": "已啟用",
   "webdavOff": "已關閉",
+  "webdavOffNoToken": "已停用（無有效權杖）",
   "webdavTokenId": "權杖 #{{id}}",
   "webdavTokenInactive": "已停用，權杖 #{{id}} 不生效",
   "webdavUpdated": "更新於 {{at}}",

package/locales/zh-HK/ftp.json

@@ -53,6 +53,22 @@
   "accountCount": "帳戶數",
   "loginBanner": "登入橫幅",
   "sslDomain": "SSL 網域",
+  "plaintextInsecure": "明文 FTP（未開 TLS）— 不安全。對外開放 21 埠前請先啟用 FTPS。",
+  "plaintextPublicLive": "vsftpd 正以公網位址監聽且未啟用 FTPS，帳號密碼會明文傳送。請啟用 FTPS、改為僅本機監聽，或輸入 PLAINTEXT 確認後維持此狀態。",
+  "bindAddress": "監聽範圍",
+  "bindAddressHint": "新安裝預設僅本機。對外監聽且未開 FTPS 需打字確認。",
+  "bindLocal": "僅本機",
+  "bindLocalHint": "127.0.0.1 — 本機測試可不開 TLS",
+  "bindPublic": "公開",
+  "bindPublicHint": "全部介面 — 請啟用 FTPS，或確認 PLAINTEXT",
+  "enableFtpsAndStart": "啟用 FTPS 並啟動",
+  "publicPlainNeedConfirm": "公開明文 FTP 需輸入 PLAINTEXT 確認",
+  "plainConfirmTitle": "未開 FTPS 就對外啟動 FTP？",
+  "plainConfirmDesc": "21 埠會在公網位址接受明文登入與傳輸。",
+  "plainConfirmC1": "網絡上可見用戶名與密碼。",
+  "plainConfirmC2": "PASV 會通告已設定的公網 IP。",
+  "plainConfirmC3": "不會代你開主機防火牆或雲安全組。",
+  "plainConfirmAction": "啟動明文 FTP",
   "pasvRange": "PASV 範圍",
   "forceTls": "強制 TLS",
   "allowWrite": "允許寫入",

package/locales/zh-HK/hostBrowse.json

@@ -97,6 +97,8 @@
   "isolationNote": "真實瀏覽器會建立臨時 Linux 用戶隔離 Chrome；離開頁面或逾時會結束並刪除該用戶。",
   "resumeHint": "可恢復上次瀏覽（{{count}} 個分頁）",
   "resumeHintDetail": "可恢復上次瀏覽（{{count}} 個分頁）· {{url}} · {{when}}",
+  "resumeHintOwned": "可恢復 {{user}} 上次瀏覽（{{count}} 個分頁）· {{url}} · {{when}}",
+  "clearSessionData": "清除工作階段資料",
   "resume": "恢復",
   "resumeDismiss": "關閉",
   "resumeDone": "已恢復工作階段",

package/locales/zh-HK/migrate.json

@@ -11,6 +11,8 @@
   "inventorying": "盤點中",
   "inventoried": "已盤點",
   "inventoriedWarn": "已盤點 · {{n}} 警告",
+  "inventoriedOrphans": "已盤點 · {{n}} 個孤立主目錄",
+  "inventoriedWarnAndOrphans": "已盤點 · {{w}} 則警告 · {{n}} 個孤立主目錄",
   "inventoryFailed": "盤點失敗",
   "pendingInventory": "待盤點",
   "projects": "專案",
@@ -70,7 +72,18 @@
   "afterRestart": "）後再按「重新整理」。",
   "inventoryWarnings": "盤點警告（{{count}}）",
   "orphanHomesHint": "孤立專案主目錄（store 無對應）。確認無用途後先刪。",
-  "orphanRemove": "刪除孤立主目錄",
+  "orphanHomesTitle": "孤立專案主目錄（{{count}}）",
+  "orphanHomesSummary": "磁碟上有 {{count}} 條路徑不在 store。不確定請先備份，確認無用後再刪。",
+  "orphanColHome": "主目錄",
+  "orphanColModified": "最後修改",
+  "orphanColEntries": "目錄項",
+  "orphanEntries": "目錄內有 {{n}} 個頂層項目",
+  "orphanKpi": "孤立主目錄",
+  "sourceOs": "作業系統",
+  "sourceDataDir": "dataDir",
+  "sourceDbRedis": "資料庫 / Redis",
+  "sourceDbRedisValue": "{{db}} 個資料庫 · {{redis}} 個 Redis",
+  "orphanRemove": "刪除",
   "orphanRemoveTitle": "刪除此孤立專案主目錄？",
   "orphanRemoveDesc": "將永久刪除磁碟上的 {{path}}。這不是 store 內專案。需超級用戶與系統變更權限。",
   "orphanRemovePhrase": "請輸入 DELETE 確認。",

package/locales/zh-HK/network.json

@@ -8,6 +8,8 @@
     "up": "已啟用",
     "down": "已停用",
     "unknown": "未知",
+    "loopback": "永久啟用",
+    "loopbackHint": "回環介面一律可用，不可變更。",
     "other": "其他"
   },
   "statGateway": "閘道",

package/locales/zh-HK/nginx.json

@@ -5,6 +5,8 @@
   "purgeOk": "已 清除",
   "projectSitesHint": "專案站點（受管 conf）同獨立站點分開列出。改專案 Nginx 請到專案 → 網絡。",
   "purgeCache": "清除 Cache + 重新載入",
+  "purgeCacheTitle": "清除 Nginx cache 並重新載入？",
+  "purgeCacheDesc": "清除磁碟 cache 並重載 Nginx。線上站點不會中斷。",
   "notInstalled": "Nginx 尚未安裝",
   "listTitle": "站點（{{count}}）",
   "listDesc": "建立後請再按「套用」同步到系統",
@@ -80,5 +82,6 @@
   "setHsts": "HSTS",
   "setCfRealIp": "Cloudflare 真實 IP",
   "setIndexes": "目錄列表",
-  "bodyInherit": "跟隨全域"
+  "bodyInherit": "跟隨全域",
+  "stopSites": "將有 {{n}} 個站點停止回應 HTTP。"
 }

package/locales/zh-HK/notes.json

@@ -1,4 +1,7 @@
 {
+  "agents": {
+    "sessionNotFound": "找不到 工作階段：{{sessionId}}"
+  },
   "notFound": "找不到",
   "needPath": "請指定路徑",
   "needName": "請填寫名稱",
@@ -65,10 +68,18 @@
     "targetOutside": "還原目標必須在專案家目錄或公開檔案根目錄之內。",
     "controlPlaneDryRun": "僅預覽——未寫入任何檔。在面板按還原並確認短語才會寫入。",
     "controlPlaneNeedConfirm": "完整還原控制平面需要確認短語 RESTORE-CONTROL-PLANE。",
-    "controlPlaneRestartAfter": "還原成功後請重啟 API。"
+    "controlPlaneRestartAfter": "還原成功後請重啟 API。",
+    "movedToTrash": "已將 {{name}} 移至回收區。{{days}} 日後永久刪除。",
+    "restoreNameExists": "無法還原 {{name}} — 已有同名備份檔。",
+    "restoredFromTrash": "已從回收區還原 {{name}}。",
+    "trashEmptied": "已從回收區永久刪除 {{n}} 個備份檔。"
   },
   "redis": {
-    "cliMissing": "未安裝 redis-cli"
+    "cliMissing": "未安裝 redis-cli",
+    "requirepassAlreadySet": "Redis 已有 requirepass — 未覆寫。",
+    "requirepassApplied": "已在執行中套用 requirepass",
+    "requirepassApplyFailed": "無法 CONFIG SET requirepass（將靠重啟與設定檔）",
+    "generatedRequirepass": "已產生 Redis 密碼（只顯示一次）：{{password}}"
   },
   "nginx": {
     "reloaded": "nginx 已 reload",
@@ -91,7 +102,8 @@
     "vsftpdStarted": "vsftpd 已啟動",
     "openPortsStep": "防火牆埠（需手動）",
     "openPortsReminder": "請在主機防火牆同雲安全組放行 TCP：{{ports}}。套用 FTPS 不會代你開埠。",
-    "openPortsPasvHint": "若登入成功但列目錄 LIST 逾時，多半是 PASV 資料埠被擋——要開齊 PASV 範圍，不是僅開啟 21。"
+    "openPortsPasvHint": "若登入成功但列目錄 LIST 逾時，多半是 PASV 資料埠被擋——要開齊 PASV 範圍，不是僅開啟 21。",
+    "publicPlaintextBlocked": "拒絕在未啟用 FTPS 時對外啟動 FTP。請改為僅本機監聽、選憑證啟用 FTPS，或輸入 PLAINTEXT 確認後才公開明文服務。"
   },
   "deploy": {
     "nodeMissingIsolated": "隔離部署找不到 Node：{{path}} — 請先裝 Node {{version}} toolchain 再部署。拒絕寫入會 203/EXEC 的 unit。",
@@ -146,7 +158,17 @@
     "applyDigOk": "PowerDNS BIND：list-zones + dig OK",
     "applyDigFail": "conf 已註冊但 dig 仍空/REFUSED — 不標 applied",
     "applySyncIncomplete": "PowerDNS bind 同步未完 — 只寫入碟。請檢查 EXECUTE/root 或 pdns 日誌",
-    "writeOnlyHint": "只寫入 zone 檔 — 要 load/apply 掛 named.conf 先會答"
+    "writeOnlyHint": "只寫入 zone 檔 — 要 load/apply 掛 named.conf 先會答",
+    "noActiveUnit": "沒有運行中的 named／bind9／pdns 單元",
+    "pdnsUnitRestarts": "pdns 單元狀態／重啟次數：{{detail}}",
+    "port53LoopbackOnly": "53 埠只綁在 loopback（systemd-resolved 127.0.0.53）— 不是產品權威 nameserver",
+    "port53Closed": "53 埠未在聽（UDP／TCP）",
+    "udp53NotPublic": "UDP/53 未綁公網位址",
+    "tcp53NotPublic": "TCP/53 未綁公網位址",
+    "noManagedZones": "dataDir/dns/zones 沒有管理中的 zone 檔",
+    "pdnsListZones": "PowerDNS list-zones：{{n}}",
+    "lookupIgnoredAt": "dig 不可用 — 已忽略 @{{server}}。不會把系統 resolver 當成該伺服器的答案。",
+    "localAOk": "本機 A {{name}} → {{ip}}"
   },
   "db": {
     "needExecuteCreate": "伺服器未開啟系統變更權限，無法在管理面板建立資料庫",
@@ -195,9 +217,6 @@
     "postqueueMailDown": "Postfix 未運行（showq 不可用）。有 YSK_EXECUTE 時面板會嘗試啟動 — 請檢查軟件分頁或 systemctl status postfix。",
     "postqueueSpoolMissing": "Postfix 佇列目錄缺失（例如 hold/）。有 YSK_EXECUTE 時面板會嘗試建立 spool 並啟動 Postfix。"
   },
-  "agents": {
-    "sessionNotFound": "找不到 工作階段：{{sessionId}}"
-  },
   "software": {
     "startUnit": "啟動 {{u}}",
     "installedSpec": "已安裝 {{title}}",
@@ -2536,7 +2555,7 @@
     "t0626": "傳輸 中止：主目錄 同步複製 失敗 {{v0}}",
     "t0627": "略過不存在: {{v0}}",
     "t0628": "傳輸 完成 → {{v0}}:{{v1}}",
-    "t0629": "專案 {{v0}} 主目錄 不存在: {{v1}}",
+    "t0629": "專案 {{v0}} 尚未建立系統用戶（主目錄 {{v1}} 不存在）。請到專案頁完成隔離。",
     "t0630": "專案 {{v0}} 綁定 bind_ip={{v1}} — 遷移後可能需清空（新機 IP 不同）",
     "t0631": "專案 {{v0}} 主目錄 非標準路徑: {{v1}}",
     "t0632": "磁碟有孤立 主目錄（store 無對應）: {{v0}}",
@@ -2953,6 +2972,15 @@
     "needInstall": "請安裝 {{stack}}",
     "needExecute": "未啟用 YSK_EXECUTE — 無法安裝套件或建立 Linux 用戶。",
     "needRoot": "非 root — 無法 useradd 或套用 vncserver。",
+    "hostnameResolves": "主機名 {{hostname}} 可解析。",
+    "hostnameUnresolvable": "此主機無法解析自己的主機名（{{hostname}}）。修好 /etc/hosts 之前，VNC 工作階段會啟動失敗。",
+    "hostnameAlreadyResolves": "主機名 {{hostname}} 已可解析 — 未改 /etc/hosts。",
+    "hostnameWouldAppend": "將會附加到 /etc/hosts：{{line}}",
+    "hostnameAppended": "已附加到 /etc/hosts：{{line}}",
+    "hostnameAppendFailed": "無法寫入 /etc/hosts：{{detail}}",
+    "hostnameAliasPresent": "主機名 {{hostname}} 已在 /etc/hosts 列為完整別名 — 未再附加。",
+    "hostnameStillUnresolvable": "已寫入 /etc/hosts，但 {{hostname}} 仍無法解析。請確認 nsswitch 的 hosts 包含 files。",
+    "skipStartHostname": "未啟動 display — 請先修好主機名解析。",
     "novncAssetsOnly": "已找到 noVNC 網頁資源；仍缺 websockify 執行檔。",
     "viewerNeedExecute": "要在瀏覽器開啟本機 VNC 桌面，需要 root 並啟用 YSK_EXECUTE",
     "browserSessionReady": "瀏覽器 VNC 工作階段已就緒：{{name}}",
@@ -3143,8 +3171,16 @@
     "vsftpdSslOff": "因 FTPS 憑證檔不存在，已把 vsftpd 設為 ssl_enable=NO 並重新啟動。",
     "dovecotSslOff": "因 {{path}} 不存在，已把 Dovecot 設為 ssl=no 並重新啟動。",
     "overlayDoesNotHeal": "產品 overlay 不會改寫 nginx、Apache、vsftpd 或 Dovecot。請用列出的套用命令（root + YSK_EXECUTE=1）。",
+    "executeStaleCli": "請加 --execute（root + YSK_EXECUTE=1）以移除殘留 CLI。",
+    "executeMissingTls": "請加 --execute（root + YSK_EXECUTE=1）以關閉缺證 TLS，讓 vsftpd／Dovecot 可以啟動。",
+    "executeGeneric": "請加 --execute（root + YSK_EXECUTE=1）以套用上述遺留清理。",
     "readinessTitle": "overlay 後主機遺留",
-    "readinessClean": "未偵測到 Apache 預設站、缺 nginx catch-all、vsftpd 失敗或舊 CLI。"
+    "readinessClean": "未偵測到 Apache 預設站、缺 nginx catch-all、vsftpd 失敗或舊 CLI。",
+    "nginxRemoved": "已移除殘留 nginx 設定 {{path}}。",
+    "nginxNotLeftover": "不是殘留 public-files 設定 — 拒絕刪除。",
+    "nginxUnusedKeep": "000-default 是未使用，不當殘留 — 未刪除。",
+    "nginxSystemCopy": "系統副本仍在：{{path}}。需要 YSK_EXECUTE + root 先可以移除。",
+    "nginxReloadFailed": "移除 {{path}} 後 nginx -t 或 reload 失敗。"
   },
   "defense": {
     "panelReqLabel": "面板請求／分鐘",

package/locales/zh-HK/projects.json

@@ -60,6 +60,7 @@
   },
   "next": {
     "pendingOsTitle": "系統用戶尚未建立",
+    "provisionOsAction": "建立系統用戶",
     "pendingOsBody": "此專案尚未建立獨立系統用戶。",
     "pendingOsActions": "可繼續部署；完整隔離需以系統管理員權限執行。",
     "deployTitle": "下一步：部署",

package/locales/zh-HK/protection.json

@@ -246,6 +246,8 @@
   "unban": "解封",
   "ban": "封禁",
   "banConfirmTitle": "封禁 {{ip}}？",
+  "banConfirmMethod": "方法：{{method}}",
+  "banConfirmUntilUnban": "會一直維持，直至你解除封禁（或 fail2ban 到期）。",
   "banConfirmDesc": "此 IP 會在主機上被封鎖。請確認不是目前面板或工作階段來源。",
   "wlRemovedUndo": "已從白名單移除 {{ip}}。5 秒內可復原。",
   "undo": "復原",

package/locales/zh-HK/publicFiles.json

@@ -41,5 +41,9 @@
   "publicRootNote": "公開根目錄：{{path}}",
   "applyConfirmTitle": "套用公開檔案站點？",
   "applyConfirmDesc": "寫入 Nginx server_name {{name}} 並重載 Nginx。",
-  "serverNameMismatch": "現行設定檔為 {{live}}；表單為 {{draft}}。套用後會覆蓋。"
+  "serverNameMismatch": "現行設定檔為 {{live}}；表單為 {{draft}}。套用後會覆蓋。",
+  "liveName": "生效名稱",
+  "draftName": "草稿名稱",
+  "draftUnapplied": "此草稿尚未套用。Nginx 仍以生效名稱對外。",
+  "discardDraft": "捨棄草稿"
 }

package/locales/zh-HK/redis.json

@@ -73,6 +73,11 @@
   "noRequirepass": "已開保護模式，但 requirepass 為空或未能讀取，目前沒有密碼。",
   "insecureShort": "不安全（無密碼）",
   "setRequirepass": "設定密碼",
+  "generateRequirepass": "產生並套用密碼",
+  "generateRequirepassTitle": "產生 Redis 密碼？",
+  "generateRequirepassDesc": "會寫入 requirepass 並重啟 Redis。密碼只顯示一次。主機變更需要 EXECUTE。",
+  "generateRequirepassDone": "已套用 Redis 密碼",
+  "generatedOnce": "已產生密碼（只顯示一次）：{{password}}",
   "rdbOnlyLossHint": "AOF 已關、RDB 仍開：重啟或崩潰可能丟失最近寫入。",
   "dirDataContainer": "/data（容器）",
   "dirHostDefault": "/var/lib/redis",

package/locales/zh-HK/security.json

@@ -61,6 +61,8 @@
   "reauthPassword": "重新驗證密碼",
   "reauthPasswordHint": "開始／重設 雙重驗證 需要再輸入密碼（防 工作階段 被盜）",
   "reauthPasswordRequired": "請先輸入登入密碼",
+  "needCurrentPassword": "請先輸入目前密碼",
+  "passwordMin8": "新密碼至少 8 個字元",
   "totpSecretGenerated": "已產生密鑰 — 請掃 QR 或複製密鑰，再輸入 App 6 位碼確認",
   "reset2fa": "重新設定 雙重驗證",
   "start2fa": "開始設定 雙重驗證",