subagent-cli 0.2.9 → 0.3.1

package/src/ink/selection.ts

@@ -1,917 +0,0 @@
-/**
- * Text selection state for fullscreen mode.
- *
- * Tracks a linear selection in screen-buffer coordinates (0-indexed col/row).
- * Selection is line-based: cells from (startCol, startRow) through
- * (endCol, endRow) inclusive, wrapping across line boundaries. This matches
- * terminal-native selection behavior (not rectangular/block).
- *
- * The selection is stored as ANCHOR (where the drag started) + FOCUS (where
- * the cursor is now). The rendered highlight normalizes to start ≤ end.
- */
-
-import { clamp } from './layout/geometry.js'
-import type { Screen, StylePool } from './screen.js'
-import { CellWidth, cellAt, cellAtIndex, setCellStyleId } from './screen.js'
-
-type Point = { col: number; row: number }
-
-export type SelectionState = {
-  /** Where the mouse-down occurred. Null when no selection. */
-  anchor: Point | null
-  /** Current drag position (updated on mouse-move while dragging). */
-  focus: Point | null
-  /** True between mouse-down and mouse-up. */
-  isDragging: boolean
-  /** For word/line mode: the initial word/line bounds from the first
-   *  multi-click. Drag extends from this span to the word/line at the
-   *  current mouse position so the original word/line stays selected
-   *  even when dragging backward past it. Null ⇔ char mode. The kind
-   *  tells extendSelection whether to snap to word or line boundaries. */
-  anchorSpan: { lo: Point; hi: Point; kind: 'word' | 'line' } | null
-  /** Text from rows that scrolled out ABOVE the viewport during
-   *  drag-to-scroll. The screen buffer only holds the current viewport,
-   *  so without this accumulator, dragging down past the bottom edge
-   *  loses the top of the selection once the anchor clamps. Prepended
-   *  to the on-screen text by getSelectedText. Reset on start/clear. */
-  scrolledOffAbove: string[]
-  /** Symmetric: rows scrolled out BELOW when dragging up. Appended. */
-  scrolledOffBelow: string[]
-  /** Soft-wrap bits parallel to scrolledOffAbove — true means the row
-   *  is a continuation of the one before it (the `\n` was inserted by
-   *  word-wrap, not in the source). Captured alongside the text at
-   *  scroll time since the screen's softWrap bitmap shifts with content.
-   *  getSelectedText uses these to join wrapped rows back into logical
-   *  lines. */
-  scrolledOffAboveSW: boolean[]
-  /** Parallel to scrolledOffBelow. */
-  scrolledOffBelowSW: boolean[]
-  /** Pre-clamp anchor row. Set when shiftSelection clamps anchor so a
-   *  reverse scroll can restore the true position and pop accumulators.
-   *  Without this, PgDn (clamps anchor) → PgUp leaves anchor at the wrong
-   *  row AND scrolledOffAbove stale — highlight ≠ copy. Undefined when
-   *  anchor is in-bounds (no clamp debt). Cleared on start/clear. */
-  virtualAnchorRow?: number
-  /** Same for focus. */
-  virtualFocusRow?: number
-  /** True if the mouse-down that started this selection had the alt
-   *  modifier set (SGR button bit 0x08). On macOS xterm.js this is a
-   *  signal that VS Code's macOptionClickForcesSelection is OFF — if it
-   *  were on, xterm.js would have consumed the event for native selection
-   *  and we'd never receive it. Used by the footer to show the right hint. */
-  lastPressHadAlt: boolean
-}
-
-export function createSelectionState(): SelectionState {
-  return {
-    anchor: null,
-    focus: null,
-    isDragging: false,
-    anchorSpan: null,
-    scrolledOffAbove: [],
-    scrolledOffBelow: [],
-    scrolledOffAboveSW: [],
-    scrolledOffBelowSW: [],
-    lastPressHadAlt: false,
-  }
-}
-
-export function startSelection(
-  s: SelectionState,
-  col: number,
-  row: number,
-): void {
-  s.anchor = { col, row }
-  // Focus is not set until the first drag motion. A click-release with no
-  // drag leaves focus null → hasSelection/selectionBounds return false/null
-  // via the `!s.focus` check, so a bare click never highlights a cell.
-  s.focus = null
-  s.isDragging = true
-  s.anchorSpan = null
-  s.scrolledOffAbove = []
-  s.scrolledOffBelow = []
-  s.scrolledOffAboveSW = []
-  s.scrolledOffBelowSW = []
-  s.virtualAnchorRow = undefined
-  s.virtualFocusRow = undefined
-  s.lastPressHadAlt = false
-}
-
-export function updateSelection(
-  s: SelectionState,
-  col: number,
-  row: number,
-): void {
-  if (!s.isDragging) return
-  // First motion at the same cell as anchor is a no-op. Terminals in mode
-  // 1002 can fire a drag event at the anchor cell (sub-pixel tremor, or a
-  // motion-release pair). Setting focus here would turn a bare click into
-  // a 1-cell selection and clobber the clipboard via useCopyOnSelect. Once
-  // focus is set (real drag), we track normally including back to anchor.
-  if (!s.focus && s.anchor && s.anchor.col === col && s.anchor.row === row)
-    return
-  s.focus = { col, row }
-}
-
-export function finishSelection(s: SelectionState): void {
-  s.isDragging = false
-  // Keep anchor/focus so highlight stays visible and text can be copied.
-  // Clear via clearSelection() on Esc or after copy.
-}
-
-export function clearSelection(s: SelectionState): void {
-  s.anchor = null
-  s.focus = null
-  s.isDragging = false
-  s.anchorSpan = null
-  s.scrolledOffAbove = []
-  s.scrolledOffBelow = []
-  s.scrolledOffAboveSW = []
-  s.scrolledOffBelowSW = []
-  s.virtualAnchorRow = undefined
-  s.virtualFocusRow = undefined
-  s.lastPressHadAlt = false
-}
-
-// Unicode-aware word character matcher: letters (any script), digits,
-// and the punctuation set iTerm2 treats as word-part by default.
-// Matching iTerm2's default means double-clicking a path like
-// `/usr/bin/bash` or `~/.claude/config.json` selects the whole thing,
-// which is the muscle memory most macOS terminal users have.
-// iTerm2 default "characters considered part of a word": /-+\~_.
-const WORD_CHAR = /[\p{L}\p{N}_/.\-+~\\]/u
-
-/**
- * Character class for double-click word-expansion. Cells with the same
- * class as the clicked cell are included in the selection; a class change
- * is a boundary. Matches typical terminal-emulator behavior (iTerm2 etc.):
- * double-click on `foo` selects `foo`, on `->` selects `->`, on spaces
- * selects the whitespace run.
- */
-function charClass(c: string): 0 | 1 | 2 {
-  if (c === ' ' || c === '') return 0
-  if (WORD_CHAR.test(c)) return 1
-  return 2
-}
-
-/**
- * Find the bounds of the same-class character run at (col, row). Returns
- * null if the click is out of bounds or lands on a noSelect cell. Used by
- * selectWordAt (initial double-click) and extendWordSelection (drag).
- */
-function wordBoundsAt(
-  screen: Screen,
-  col: number,
-  row: number,
-): { lo: number; hi: number } | null {
-  if (row < 0 || row >= screen.height) return null
-  const width = screen.width
-  const noSelect = screen.noSelect
-  const rowOff = row * width
-
-  // If the click landed on the spacer tail of a wide char, step back to
-  // the head so the class check sees the actual grapheme.
-  let c = col
-  if (c > 0) {
-    const cell = cellAt(screen, c, row)
-    if (cell && cell.width === CellWidth.SpacerTail) c -= 1
-  }
-  if (c < 0 || c >= width || noSelect[rowOff + c] === 1) return null
-
-  const startCell = cellAt(screen, c, row)
-  if (!startCell) return null
-  const cls = charClass(startCell.char)
-
-  // Expand left: include cells of the same class, stop at noSelect or
-  // class change. SpacerTail cells are stepped over (the wide-char head
-  // at the preceding column determines the class).
-  let lo = c
-  while (lo > 0) {
-    const prev = lo - 1
-    if (noSelect[rowOff + prev] === 1) break
-    const pc = cellAt(screen, prev, row)
-    if (!pc) break
-    if (pc.width === CellWidth.SpacerTail) {
-      // Step over the spacer to the wide-char head
-      if (prev === 0 || noSelect[rowOff + prev - 1] === 1) break
-      const head = cellAt(screen, prev - 1, row)
-      if (!head || charClass(head.char) !== cls) break
-      lo = prev - 1
-      continue
-    }
-    if (charClass(pc.char) !== cls) break
-    lo = prev
-  }
-
-  // Expand right: same logic, skipping spacer tails.
-  let hi = c
-  while (hi < width - 1) {
-    const next = hi + 1
-    if (noSelect[rowOff + next] === 1) break
-    const nc = cellAt(screen, next, row)
-    if (!nc) break
-    if (nc.width === CellWidth.SpacerTail) {
-      // Include the spacer tail in the selection range (it belongs to
-      // the wide char at hi) and continue past it.
-      hi = next
-      continue
-    }
-    if (charClass(nc.char) !== cls) break
-    hi = next
-  }
-
-  return { lo, hi }
-}
-
-/** -1 if a < b, 1 if a > b, 0 if equal (reading order: row then col). */
-function comparePoints(a: Point, b: Point): number {
-  if (a.row !== b.row) return a.row < b.row ? -1 : 1
-  if (a.col !== b.col) return a.col < b.col ? -1 : 1
-  return 0
-}
-
-/**
- * Select the word at (col, row) by scanning the screen buffer for the
- * bounds of the same-class character run. Mutates the selection in place.
- * No-op if the click is out of bounds or lands on a noSelect cell.
- * Sets isDragging=true and anchorSpan so a subsequent drag extends the
- * selection word-by-word (native macOS behavior).
- */
-export function selectWordAt(
-  s: SelectionState,
-  screen: Screen,
-  col: number,
-  row: number,
-): void {
-  const b = wordBoundsAt(screen, col, row)
-  if (!b) return
-  const lo = { col: b.lo, row }
-  const hi = { col: b.hi, row }
-  s.anchor = lo
-  s.focus = hi
-  s.isDragging = true
-  s.anchorSpan = { lo, hi, kind: 'word' }
-}
-
-// Printable ASCII minus terminal URL delimiters. Restricting to single-
-// codeunit ASCII keeps cell-count === string-index, so the column-span
-// check below is exact (no wide-char/grapheme drift).
-const URL_BOUNDARY = new Set([...'<>"\'` '])
-function isUrlChar(c: string): boolean {
-  if (c.length !== 1) return false
-  const code = c.charCodeAt(0)
-  return code >= 0x21 && code <= 0x7e && !URL_BOUNDARY.has(c)
-}
-
-/**
- * Scan the screen buffer for a plain-text URL at (col, row). Mirrors the
- * terminal's native Cmd+Click URL detection, which fullscreen mode's mouse
- * tracking intercepts. Called from getHyperlinkAt as a fallback when the
- * cell has no OSC 8 hyperlink.
- */
-export function findPlainTextUrlAt(
-  screen: Screen,
-  col: number,
-  row: number,
-): string | undefined {
-  if (row < 0 || row >= screen.height) return undefined
-  const width = screen.width
-  const noSelect = screen.noSelect
-  const rowOff = row * width
-
-  let c = col
-  if (c > 0) {
-    const cell = cellAt(screen, c, row)
-    if (cell && cell.width === CellWidth.SpacerTail) c -= 1
-  }
-  if (c < 0 || c >= width || noSelect[rowOff + c] === 1) return undefined
-
-  const startCell = cellAt(screen, c, row)
-  if (!startCell || !isUrlChar(startCell.char)) return undefined
-
-  // Expand left/right to the bounds of the URL-char run. URLs are ASCII
-  // (CellWidth.Narrow, 1 codeunit), so hitting a non-ASCII/wide/spacer
-  // cell is a boundary — no need to step over spacers like wordBoundsAt.
-  let lo = c
-  while (lo > 0) {
-    const prev = lo - 1
-    if (noSelect[rowOff + prev] === 1) break
-    const pc = cellAt(screen, prev, row)
-    if (!pc || pc.width !== CellWidth.Narrow || !isUrlChar(pc.char)) break
-    lo = prev
-  }
-  let hi = c
-  while (hi < width - 1) {
-    const next = hi + 1
-    if (noSelect[rowOff + next] === 1) break
-    const nc = cellAt(screen, next, row)
-    if (!nc || nc.width !== CellWidth.Narrow || !isUrlChar(nc.char)) break
-    hi = next
-  }
-
-  let token = ''
-  for (let i = lo; i <= hi; i++) token += cellAt(screen, i, row)!.char
-
-  // 1 cell = 1 char across [lo, hi] (ASCII-only run), so string index =
-  // column offset. Find the last scheme anchor at or before the click —
-  // a run like `https://a.com,https://b.com` has two, and clicking the
-  // second should return the second URL, not the greedy match of both.
-  const clickIdx = c - lo
-  const schemeRe = /(?:https?|file):\/\//g
-  let urlStart = -1
-  let urlEnd = token.length
-  for (let m; (m = schemeRe.exec(token)); ) {
-    if (m.index > clickIdx) {
-      urlEnd = m.index
-      break
-    }
-    urlStart = m.index
-  }
-  if (urlStart < 0) return undefined
-  let url = token.slice(urlStart, urlEnd)
-
-  // Strip trailing sentence punctuation. For closers () ] }, only strip
-  // if unbalanced — `/wiki/Foo_(bar)` keeps `)`, `/arr[0]` keeps `]`.
-  const OPENER: Record<string, string> = { ')': '(', ']': '[', '}': '{' }
-  while (url.length > 0) {
-    const last = url.at(-1)!
-    if ('.,;:!?'.includes(last)) {
-      url = url.slice(0, -1)
-      continue
-    }
-    const opener = OPENER[last]
-    if (!opener) break
-    let opens = 0
-    let closes = 0
-    for (let i = 0; i < url.length; i++) {
-      const ch = url.charAt(i)
-      if (ch === opener) opens++
-      else if (ch === last) closes++
-    }
-    if (closes > opens) url = url.slice(0, -1)
-    else break
-  }
-
-  // urlStart already guarantees click >= URL start; check right edge.
-  if (clickIdx >= urlStart + url.length) return undefined
-
-  return url
-}
-
-/**
- * Select the entire row. Sets isDragging=true and anchorSpan so a
- * subsequent drag extends the selection line-by-line. The anchor/focus
- * span from col 0 to width-1; getSelectedText handles noSelect skipping
- * and trailing-whitespace trimming so the copied text is just the visible
- * line content.
- */
-export function selectLineAt(
-  s: SelectionState,
-  screen: Screen,
-  row: number,
-): void {
-  if (row < 0 || row >= screen.height) return
-  const lo = { col: 0, row }
-  const hi = { col: screen.width - 1, row }
-  s.anchor = lo
-  s.focus = hi
-  s.isDragging = true
-  s.anchorSpan = { lo, hi, kind: 'line' }
-}
-
-/**
- * Extend a word/line-mode selection to the word/line at (col, row). The
- * anchor span (the original multi-clicked word/line) stays selected; the
- * selection grows from that span to the word/line at the current mouse
- * position. Word mode falls back to the raw cell when the mouse is over a
- * noSelect cell or out of bounds, so dragging into gutters still extends.
- */
-export function extendSelection(
-  s: SelectionState,
-  screen: Screen,
-  col: number,
-  row: number,
-): void {
-  if (!s.isDragging || !s.anchorSpan) return
-  const span = s.anchorSpan
-  let mLo: Point
-  let mHi: Point
-  if (span.kind === 'word') {
-    const b = wordBoundsAt(screen, col, row)
-    mLo = { col: b ? b.lo : col, row }
-    mHi = { col: b ? b.hi : col, row }
-  } else {
-    const r = clamp(row, 0, screen.height - 1)
-    mLo = { col: 0, row: r }
-    mHi = { col: screen.width - 1, row: r }
-  }
-  if (comparePoints(mHi, span.lo) < 0) {
-    // Mouse target ends before anchor span: extend backward.
-    s.anchor = span.hi
-    s.focus = mLo
-  } else if (comparePoints(mLo, span.hi) > 0) {
-    // Mouse target starts after anchor span: extend forward.
-    s.anchor = span.lo
-    s.focus = mHi
-  } else {
-    // Mouse overlaps the anchor span: just select the anchor span.
-    s.anchor = span.lo
-    s.focus = span.hi
-  }
-}
-
-/** Semantic keyboard focus moves. See moveSelectionFocus in ink.tsx for
- *  how screen bounds + row-wrap are applied. */
-export type FocusMove =
-  | 'left'
-  | 'right'
-  | 'up'
-  | 'down'
-  | 'lineStart'
-  | 'lineEnd'
-
-/**
- * Set focus to (col, row) for keyboard selection extension (shift+arrow).
- * Anchor stays fixed; selection grows or shrinks depending on where focus
- * moves relative to anchor. Drops to char mode (clears anchorSpan) —
- * native macOS does this too: shift+arrow after a double-click word-select
- * extends char-by-char from the word edge, not word-by-word. Scrolled-off
- * accumulators are preserved: keyboard-extending a drag-scrolled selection
- * keeps the off-screen rows. Caller supplies coords already clamped/wrapped.
- */
-export function moveFocus(s: SelectionState, col: number, row: number): void {
-  if (!s.focus) return
-  s.anchorSpan = null
-  s.focus = { col, row }
-  // Explicit user repositioning — any stale virtual focus (from a prior
-  // shiftSelection clamp) no longer reflects intent. Anchor stays put so
-  // virtualAnchorRow is still valid for its own round-trip.
-  s.virtualFocusRow = undefined
-}
-
-/**
- * Shift anchor AND focus by dRow, clamped to [minRow, maxRow]. Used for
- * keyboard scroll (PgUp/PgDn/ctrl+u/d/b/f): the whole selection must track
- * the content, unlike drag-to-scroll where focus stays at the mouse. Any
- * point that hits a clamp bound gets its col reset to the full-width edge —
- * its original content scrolled off-screen and was captured by
- * captureScrolledRows, so the col constraint was already consumed. Keeping
- * it would truncate the NEW content now at that screen row. Clamp col is 0
- * for dRow<0 (scrolling down, top leaves, 'above' semantics) or width-1 for
- * dRow>0 (scrolling up, bottom leaves, 'below' semantics).
- *
- * If both ends overshoot the SAME viewport edge (select text → Home/End/g/G
- * jumps far enough that both are out of view), clear — otherwise both clamp
- * to the same corner cell and a ghost 1-cell highlight lingers, and
- * getSelectedText returns one unrelated char from that corner. Symmetric
- * with shiftSelectionForFollow's top-edge check, but bidirectional: keyboard
- * scroll can jump either way.
- */
-export function shiftSelection(
-  s: SelectionState,
-  dRow: number,
-  minRow: number,
-  maxRow: number,
-  width: number,
-): void {
-  if (!s.anchor || !s.focus) return
-  // Virtual rows track pre-clamp positions so reverse scrolls restore
-  // correctly. Without this, clamp(5→0) + shift(+10) = 10, not the true 5,
-  // and scrolledOffAbove stays stale (highlight ≠ copy).
-  const vAnchor = (s.virtualAnchorRow ?? s.anchor.row) + dRow
-  const vFocus = (s.virtualFocusRow ?? s.focus.row) + dRow
-  if (
-    (vAnchor < minRow && vFocus < minRow) ||
-    (vAnchor > maxRow && vFocus > maxRow)
-  ) {
-    clearSelection(s)
-    return
-  }
-  // Debt = how far the nearer endpoint overshoots each edge. When debt
-  // shrinks (reverse scroll), those rows are back on-screen — pop from
-  // the accumulator so getSelectedText doesn't double-count them.
-  const oldMin = Math.min(
-    s.virtualAnchorRow ?? s.anchor.row,
-    s.virtualFocusRow ?? s.focus.row,
-  )
-  const oldMax = Math.max(
-    s.virtualAnchorRow ?? s.anchor.row,
-    s.virtualFocusRow ?? s.focus.row,
-  )
-  const oldAboveDebt = Math.max(0, minRow - oldMin)
-  const oldBelowDebt = Math.max(0, oldMax - maxRow)
-  const newAboveDebt = Math.max(0, minRow - Math.min(vAnchor, vFocus))
-  const newBelowDebt = Math.max(0, Math.max(vAnchor, vFocus) - maxRow)
-  if (newAboveDebt < oldAboveDebt) {
-    // scrolledOffAbove pushes newest at the end (closest to on-screen).
-    const drop = oldAboveDebt - newAboveDebt
-    s.scrolledOffAbove.length -= drop
-    s.scrolledOffAboveSW.length = s.scrolledOffAbove.length
-  }
-  if (newBelowDebt < oldBelowDebt) {
-    // scrolledOffBelow unshifts newest at the front (closest to on-screen).
-    const drop = oldBelowDebt - newBelowDebt
-    s.scrolledOffBelow.splice(0, drop)
-    s.scrolledOffBelowSW.splice(0, drop)
-  }
-  // Invariant: accumulator length ≤ debt. If the accumulator exceeds debt,
-  // the excess is stale — e.g., moveFocus cleared virtualFocusRow without
-  // trimming the accumulator, orphaning entries the pop above can never
-  // reach because oldDebt was ALREADY 0. Truncate to debt (keeping the
-  // newest = closest-to-on-screen entries). Check newDebt (not oldDebt):
-  // captureScrolledRows runs BEFORE this shift in the real flow (ink.tsx),
-  // so at entry the accumulator is populated but oldDebt is still 0 —
-  // that's the normal establish-debt path, not stale.
-  if (s.scrolledOffAbove.length > newAboveDebt) {
-    // Above pushes newest at END → keep END.
-    s.scrolledOffAbove =
-      newAboveDebt > 0 ? s.scrolledOffAbove.slice(-newAboveDebt) : []
-    s.scrolledOffAboveSW =
-      newAboveDebt > 0 ? s.scrolledOffAboveSW.slice(-newAboveDebt) : []
-  }
-  if (s.scrolledOffBelow.length > newBelowDebt) {
-    // Below unshifts newest at FRONT → keep FRONT.
-    s.scrolledOffBelow = s.scrolledOffBelow.slice(0, newBelowDebt)
-    s.scrolledOffBelowSW = s.scrolledOffBelowSW.slice(0, newBelowDebt)
-  }
-  // Clamp col depends on which EDGE (not dRow direction): virtual tracking
-  // means a top-clamped point can stay top-clamped during a dRow>0 reverse
-  // shift — dRow-based clampCol would give it the bottom col.
-  const shift = (p: Point, vRow: number): Point => {
-    if (vRow < minRow) return { col: 0, row: minRow }
-    if (vRow > maxRow) return { col: width - 1, row: maxRow }
-    return { col: p.col, row: vRow }
-  }
-  s.anchor = shift(s.anchor, vAnchor)
-  s.focus = shift(s.focus, vFocus)
-  s.virtualAnchorRow =
-    vAnchor < minRow || vAnchor > maxRow ? vAnchor : undefined
-  s.virtualFocusRow = vFocus < minRow || vFocus > maxRow ? vFocus : undefined
-  // anchorSpan not virtual-tracked: it's for word/line extend-on-drag,
-  // irrelevant to the keyboard-scroll round-trip case.
-  if (s.anchorSpan) {
-    const sp = (p: Point): Point => {
-      const r = p.row + dRow
-      if (r < minRow) return { col: 0, row: minRow }
-      if (r > maxRow) return { col: width - 1, row: maxRow }
-      return { col: p.col, row: r }
-    }
-    s.anchorSpan = {
-      lo: sp(s.anchorSpan.lo),
-      hi: sp(s.anchorSpan.hi),
-      kind: s.anchorSpan.kind,
-    }
-  }
-}
-
-/**
- * Shift the anchor row by dRow, clamped to [minRow, maxRow]. Used during
- * drag-to-scroll: when the ScrollBox scrolls by N rows, the content that
- * was under the anchor is now at a different viewport row, so the anchor
- * must follow it. Focus is left unchanged (it stays at the mouse position).
- */
-export function shiftAnchor(
-  s: SelectionState,
-  dRow: number,
-  minRow: number,
-  maxRow: number,
-): void {
-  if (!s.anchor) return
-  // Same virtual-row tracking as shiftSelection/shiftSelectionForFollow: the
-  // drag→follow transition hands off to shiftSelectionForFollow, which reads
-  // (virtualAnchorRow ?? anchor.row). Without this, drag-phase clamping
-  // leaves virtual undefined → follow initializes from the already-clamped
-  // row, under-counting total drift → shiftSelection's invariant-restore
-  // prematurely clears valid drag-phase accumulator entries.
-  const raw = (s.virtualAnchorRow ?? s.anchor.row) + dRow
-  s.anchor = { col: s.anchor.col, row: clamp(raw, minRow, maxRow) }
-  s.virtualAnchorRow = raw < minRow || raw > maxRow ? raw : undefined
-  // anchorSpan not virtual-tracked (word/line extend, irrelevant to
-  // keyboard-scroll round-trip) — plain clamp from current row.
-  if (s.anchorSpan) {
-    const shift = (p: Point): Point => ({
-      col: p.col,
-      row: clamp(p.row + dRow, minRow, maxRow),
-    })
-    s.anchorSpan = {
-      lo: shift(s.anchorSpan.lo),
-      hi: shift(s.anchorSpan.hi),
-      kind: s.anchorSpan.kind,
-    }
-  }
-}
-
-/**
- * Shift the whole selection (anchor + focus + anchorSpan) by dRow, clamped
- * to [minRow, maxRow]. Used when sticky/auto-follow scrolls the ScrollBox
- * while a selection is active — native terminal behavior is for the
- * highlight to walk up the screen with the text (not stay at the same
- * screen position).
- *
- * Differs from shiftAnchor: during drag-to-scroll, focus tracks the live
- * mouse position and only anchor follows the text. During streaming-follow,
- * the selection is text-anchored at both ends — both must move. The
- * isDragging check in ink.tsx picks which shift to apply.
- *
- * If both ends would shift strictly BELOW minRow (unclamped), the selected
- * text has scrolled entirely off the top. Clear it — otherwise a single
- * inverted cell lingers at the viewport top as a ghost (native terminals
- * drop the selection when it leaves scrollback). Landing AT minRow is
- * still valid: that cell holds the correct text. Returns true if the
- * selection was cleared so the caller can notify React-land subscribers
- * (useHasSelection) — the caller is inside onRender so it can't use
- * notifySelectionChange (recursion), must fire listeners directly.
- */
-export function shiftSelectionForFollow(
-  s: SelectionState,
-  dRow: number,
-  minRow: number,
-  maxRow: number,
-): boolean {
-  if (!s.anchor) return false
-  // Mirror shiftSelection: compute raw (unclamped) positions from virtual
-  // if set, else current. This handles BOTH the update path (virtual already
-  // set from a prior keyboard scroll) AND the initialize path (first clamp
-  // happens HERE via follow-scroll, no prior keyboard scroll). Without the
-  // initialize path, follow-scroll-first leaves virtual undefined even
-  // though the clamp below occurred → a later PgUp computes debt from the
-  // clamped row instead of the true pre-clamp row and never pops the
-  // accumulator — getSelectedText double-counts the off-screen rows.
-  const rawAnchor = (s.virtualAnchorRow ?? s.anchor.row) + dRow
-  const rawFocus = s.focus
-    ? (s.virtualFocusRow ?? s.focus.row) + dRow
-    : undefined
-  if (rawAnchor < minRow && rawFocus !== undefined && rawFocus < minRow) {
-    clearSelection(s)
-    return true
-  }
-  // Clamp from raw, not p.row+dRow — so a virtual position coming back
-  // in-bounds lands at the TRUE position, not the stale clamped one.
-  s.anchor = { col: s.anchor.col, row: clamp(rawAnchor, minRow, maxRow) }
-  if (s.focus && rawFocus !== undefined) {
-    s.focus = { col: s.focus.col, row: clamp(rawFocus, minRow, maxRow) }
-  }
-  s.virtualAnchorRow =
-    rawAnchor < minRow || rawAnchor > maxRow ? rawAnchor : undefined
-  s.virtualFocusRow =
-    rawFocus !== undefined && (rawFocus < minRow || rawFocus > maxRow)
-      ? rawFocus
-      : undefined
-  // anchorSpan not virtual-tracked (word/line extend, irrelevant to
-  // keyboard-scroll round-trip) — plain clamp from current row.
-  if (s.anchorSpan) {
-    const shift = (p: Point): Point => ({
-      col: p.col,
-      row: clamp(p.row + dRow, minRow, maxRow),
-    })
-    s.anchorSpan = {
-      lo: shift(s.anchorSpan.lo),
-      hi: shift(s.anchorSpan.hi),
-      kind: s.anchorSpan.kind,
-    }
-  }
-  return false
-}
-
-export function hasSelection(s: SelectionState): boolean {
-  return s.anchor !== null && s.focus !== null
-}
-
-/**
- * Normalized selection bounds: start is always before end in reading order.
- * Returns null if no active selection.
- */
-export function selectionBounds(s: SelectionState): {
-  start: { col: number; row: number }
-  end: { col: number; row: number }
-} | null {
-  if (!s.anchor || !s.focus) return null
-  return comparePoints(s.anchor, s.focus) <= 0
-    ? { start: s.anchor, end: s.focus }
-    : { start: s.focus, end: s.anchor }
-}
-
-/**
- * Check if a cell at (col, row) is within the current selection range.
- * Used by the renderer to apply inverse style.
- */
-export function isCellSelected(
-  s: SelectionState,
-  col: number,
-  row: number,
-): boolean {
-  const b = selectionBounds(s)
-  if (!b) return false
-  const { start, end } = b
-  if (row < start.row || row > end.row) return false
-  if (row === start.row && col < start.col) return false
-  if (row === end.row && col > end.col) return false
-  return true
-}
-
-/** Extract text from one screen row. When the next row is a soft-wrap
- *  continuation (screen.softWrap[row+1]>0), clamp to that content-end
- *  column and skip the trailing trim so the word-separator space survives
- *  the join. See Screen.softWrap for why the clamp is necessary. */
-function extractRowText(
-  screen: Screen,
-  row: number,
-  colStart: number,
-  colEnd: number,
-): string {
-  const noSelect = screen.noSelect
-  const rowOff = row * screen.width
-  const contentEnd = row + 1 < screen.height ? screen.softWrap[row + 1]! : 0
-  const lastCol = contentEnd > 0 ? Math.min(colEnd, contentEnd - 1) : colEnd
-  let line = ''
-  for (let col = colStart; col <= lastCol; col++) {
-    // Skip cells marked noSelect (gutters, line numbers, diff sigils).
-    // Check before cellAt to avoid the decode cost for excluded cells.
-    if (noSelect[rowOff + col] === 1) continue
-    const cell = cellAt(screen, col, row)
-    if (!cell) continue
-    // Skip spacer tails (second half of wide chars) — the head already
-    // contains the full grapheme. SpacerHead is a blank at line-end.
-    if (
-      cell.width === CellWidth.SpacerTail ||
-      cell.width === CellWidth.SpacerHead
-    ) {
-      continue
-    }
-    line += cell.char
-  }
-  return contentEnd > 0 ? line : line.replace(/\s+$/, '')
-}
-
-/** Accumulator for selected text that merges soft-wrapped rows back
- *  into logical lines. push(text, sw) appends a newline before text
- *  only when sw=false (i.e. the row starts a new logical line). Rows
- *  with sw=true are concatenated onto the previous row. */
-function joinRows(
-  lines: string[],
-  text: string,
-  sw: boolean | undefined,
-): void {
-  if (sw && lines.length > 0) {
-    lines[lines.length - 1] += text
-  } else {
-    lines.push(text)
-  }
-}
-
-/**
- * Extract text from the screen buffer within the selection range.
- * Rows are joined with newlines unless the screen's softWrap bitmap
- * marks a row as a word-wrap continuation — those rows are concatenated
- * onto the previous row so the copied text matches the logical source
- * line, not the visual wrapped layout. Trailing whitespace on the last
- * fragment of each logical line is trimmed. Wide-char spacer cells are
- * skipped. Rows that scrolled out of the viewport during drag-to-scroll
- * are joined back in from the scrolledOffAbove/Below accumulators along
- * with their captured softWrap bits.
- */
-export function getSelectedText(s: SelectionState, screen: Screen): string {
-  const b = selectionBounds(s)
-  if (!b) return ''
-  const { start, end } = b
-  const sw = screen.softWrap
-  const lines: string[] = []
-
-  for (let i = 0; i < s.scrolledOffAbove.length; i++) {
-    joinRows(lines, s.scrolledOffAbove[i]!, s.scrolledOffAboveSW[i])
-  }
-
-  for (let row = start.row; row <= end.row; row++) {
-    const rowStart = row === start.row ? start.col : 0
-    const rowEnd = row === end.row ? end.col : screen.width - 1
-    joinRows(lines, extractRowText(screen, row, rowStart, rowEnd), sw[row]! > 0)
-  }
-
-  for (let i = 0; i < s.scrolledOffBelow.length; i++) {
-    joinRows(lines, s.scrolledOffBelow[i]!, s.scrolledOffBelowSW[i])
-  }
-
-  return lines.join('\n')
-}
-
-/**
- * Capture text from rows about to scroll out of the viewport during
- * drag-to-scroll, BEFORE scrollBy overwrites them. Only the rows that
- * intersect the selection are captured, using the selection's col bounds
- * for the anchor-side boundary row. After capturing the anchor row, the
- * anchor.col AND anchorSpan cols are reset to the full-width boundary so
- * subsequent captures and the final getSelectedText don't re-apply a stale
- * col constraint to content that's no longer under the original anchor.
- * Both span cols are reset (not just the near side): after a blocked
- * reversal the drag can flip direction, and extendSelection then reads the
- * OPPOSITE span side — which would otherwise still hold the original word
- * boundary and truncate one subsequently-captured row.
- *
- * side='above': rows scrolling out the top (dragging down, anchor=start).
- * side='below': rows scrolling out the bottom (dragging up, anchor=end).
- */
-export function captureScrolledRows(
-  s: SelectionState,
-  screen: Screen,
-  firstRow: number,
-  lastRow: number,
-  side: 'above' | 'below',
-): void {
-  const b = selectionBounds(s)
-  if (!b || firstRow > lastRow) return
-  const { start, end } = b
-  // Intersect [firstRow, lastRow] with [start.row, end.row]. Rows outside
-  // the selection aren't captured — they weren't selected.
-  const lo = Math.max(firstRow, start.row)
-  const hi = Math.min(lastRow, end.row)
-  if (lo > hi) return
-
-  const width = screen.width
-  const sw = screen.softWrap
-  const captured: string[] = []
-  const capturedSW: boolean[] = []
-  for (let row = lo; row <= hi; row++) {
-    const colStart = row === start.row ? start.col : 0
-    const colEnd = row === end.row ? end.col : width - 1
-    captured.push(extractRowText(screen, row, colStart, colEnd))
-    capturedSW.push(sw[row]! > 0)
-  }
-
-  if (side === 'above') {
-    // Newest rows go at the bottom of the above-accumulator (closest to
-    // the on-screen content in reading order).
-    s.scrolledOffAbove.push(...captured)
-    s.scrolledOffAboveSW.push(...capturedSW)
-    // We just captured the top of the selection. The anchor (=start when
-    // dragging down) is now pointing at content that will scroll out; its
-    // col constraint was applied to the captured row. Reset to col 0 so
-    // the NEXT tick and the final getSelectedText read the full row.
-    if (s.anchor && s.anchor.row === start.row && lo === start.row) {
-      s.anchor = { col: 0, row: s.anchor.row }
-      if (s.anchorSpan) {
-        s.anchorSpan = {
-          kind: s.anchorSpan.kind,
-          lo: { col: 0, row: s.anchorSpan.lo.row },
-          hi: { col: width - 1, row: s.anchorSpan.hi.row },
-        }
-      }
-    }
-  } else {
-    // Newest rows go at the TOP of the below-accumulator — they're
-    // closest to the on-screen content.
-    s.scrolledOffBelow.unshift(...captured)
-    s.scrolledOffBelowSW.unshift(...capturedSW)
-    if (s.anchor && s.anchor.row === end.row && hi === end.row) {
-      s.anchor = { col: width - 1, row: s.anchor.row }
-      if (s.anchorSpan) {
-        s.anchorSpan = {
-          kind: s.anchorSpan.kind,
-          lo: { col: 0, row: s.anchorSpan.lo.row },
-          hi: { col: width - 1, row: s.anchorSpan.hi.row },
-        }
-      }
-    }
-  }
-}
-
-/**
- * Apply the selection overlay directly to the screen buffer by changing
- * the style of every cell in the selection range. Called after the
- * renderer produces the Frame but before the diff — the normal diffEach
- * then picks up the restyled cells as ordinary changes, so LogUpdate
- * stays a pure diff engine with no selection awareness.
- *
- * Uses a SOLID selection background (theme-provided via StylePool.
- * setSelectionBg) that REPLACES each cell's bg while PRESERVING its fg —
- * matches native terminal selection. Previously SGR-7 inverse (swapped
- * fg/bg per cell), which fragmented badly over syntax-highlighted text:
- * every distinct fg color became a different bg stripe.
- *
- * Uses StylePool caches so on drag the only work per cell is a Map
- * lookup + packed-int write.
- */
-export function applySelectionOverlay(
-  screen: Screen,
-  selection: SelectionState,
-  stylePool: StylePool,
-): void {
-  const b = selectionBounds(selection)
-  if (!b) return
-  const { start, end } = b
-  const width = screen.width
-  const noSelect = screen.noSelect
-  for (let row = start.row; row <= end.row && row < screen.height; row++) {
-    const colStart = row === start.row ? start.col : 0
-    const colEnd = row === end.row ? Math.min(end.col, width - 1) : width - 1
-    const rowOff = row * width
-    for (let col = colStart; col <= colEnd; col++) {
-      const idx = rowOff + col
-      // Skip noSelect cells — gutters stay visually unchanged so it's
-      // clear they're not part of the copy. Surrounding selectable cells
-      // still highlight so the selection extent remains visible.
-      if (noSelect[idx] === 1) continue
-      const cell = cellAtIndex(screen, idx)
-      setCellStyleId(screen, col, row, stylePool.withSelectionBg(cell.styleId))
-    }
-  }
-}