subagent-cli 0.2.9 → 0.3.1

package/src/hooks/useVirtualScroll.ts

@@ -1,721 +0,0 @@
-import type { RefObject } from 'react'
-import {
-  useCallback,
-  useDeferredValue,
-  useLayoutEffect,
-  useMemo,
-  useRef,
-  useSyncExternalStore,
-} from 'react'
-import type { ScrollBoxHandle } from '../ink/components/ScrollBox.js'
-import type { DOMElement } from '../ink/dom.js'
-
-/**
- * Estimated height (rows) for items not yet measured. Intentionally LOW:
- * overestimating causes blank space (we stop mounting too early and the
- * viewport bottom shows empty spacer), while underestimating just mounts
- * a few extra items into overscan. The asymmetry means we'd rather err low.
- */
-const DEFAULT_ESTIMATE = 3
-/**
- * Extra rows rendered above and below the viewport. Generous because real
- * heights can be 10x the estimate for long tool results.
- */
-const OVERSCAN_ROWS = 80
-/** Items rendered before the ScrollBox has laid out (viewportHeight=0). */
-const COLD_START_COUNT = 30
-/**
- * scrollTop quantization for the useSyncExternalStore snapshot. Without
- * this, every wheel tick (3-5 per notch) triggers a full React commit +
- * Yoga calculateLayout() + Ink diff cycle — the CPU spike. Visual scroll
- * stays smooth regardless: ScrollBox.forceRender fires on every scrollBy
- * and Ink reads the REAL scrollTop from the DOM node, independent of what
- * React thinks. React only needs to re-render when the mounted range must
- * shift; half of OVERSCAN_ROWS is the tightest safe bin (guarantees ≥40
- * rows of overscan remain before the new range is needed).
- */
-const SCROLL_QUANTUM = OVERSCAN_ROWS >> 1
-/**
- * Worst-case height assumed for unmeasured items when computing coverage.
- * A MessageRow can be as small as 1 row (single-line tool call). Using 1
- * here guarantees the mounted span physically reaches the viewport bottom
- * regardless of how small items actually are — at the cost of over-mounting
- * when items are larger (which is fine, overscan absorbs it).
- */
-const PESSIMISTIC_HEIGHT = 1
-/** Cap on mounted items to bound fiber allocation even in degenerate cases. */
-const MAX_MOUNTED_ITEMS = 300
-/**
- * Max NEW items to mount in a single commit. Scrolling into a fresh range
- * with PESSIMISTIC_HEIGHT=1 would mount 194 items at once (OVERSCAN_ROWS*2+
- * viewportH = 194); each fresh MessageRow render costs ~1.5ms (marked lexer
- * + formatToken + ~11 createInstance) = ~290ms sync block. Sliding the range
- * toward the target over multiple commits keeps per-commit mount cost
- * bounded. The render-time clamp (scrollClampMin/Max) holds the viewport at
- * the edge of mounted content so there's no blank during catch-up.
- */
-const SLIDE_STEP = 25
-
-const NOOP_UNSUB = () => {}
-
-export type VirtualScrollResult = {
-  /** [startIndex, endIndex) half-open slice of items to render. */
-  range: readonly [number, number]
-  /** Height (rows) of spacer before the first rendered item. */
-  topSpacer: number
-  /** Height (rows) of spacer after the last rendered item. */
-  bottomSpacer: number
-  /**
-   * Callback ref factory. Attach `measureRef(itemKey)` to each rendered
-   * item's root Box; after Yoga layout, the computed height is cached.
-   */
-  measureRef: (key: string) => (el: DOMElement | null) => void
-  /**
-   * Attach to the topSpacer Box. Its Yoga computedTop IS listOrigin
-   * (first child of the virtualized region, so its top = cumulative
-   * height of everything rendered before the list in the ScrollBox).
-   * Drift-free: no subtraction of offsets, no dependence on item
-   * heights that change between renders (tmux resize).
-   */
-  spacerRef: RefObject<DOMElement | null>
-  /**
-   * Cumulative y-offset of each item in list-wrapper coords (NOT scrollbox
-   * coords — logo/siblings before this list shift the origin).
-   * offsets[i] = rows above item i; offsets[n] = totalHeight.
-   * Recomputed every render — don't memo on identity.
-   */
-  offsets: ArrayLike<number>
-  /**
-   * Read Yoga computedTop for item at index. Returns -1 if the item isn't
-   * mounted or hasn't been laid out. Item Boxes are direct Yoga children
-   * of the ScrollBox content wrapper (fragments collapse in the Ink DOM),
-   * so this is content-wrapper-relative — same coordinate space as
-   * scrollTop. Yoga layout is scroll-independent (translation happens
-   * later in renderNodeToOutput), so positions stay valid across scrolls
-   * without waiting for Ink to re-render. StickyTracker walks the mount
-   * range with this to find the viewport boundary at per-scroll-tick
-   * granularity (finer than the 40-row quantum this hook re-renders at).
-   */
-  getItemTop: (index: number) => number
-  /**
-   * Get the mounted DOMElement for item at index, or null. For
-   * ScrollBox.scrollToElement — anchoring by element ref defers the
-   * Yoga-position read to render time (deterministic; no throttle race).
-   */
-  getItemElement: (index: number) => DOMElement | null
-  /** Measured Yoga height. undefined = not yet measured; 0 = rendered nothing. */
-  getItemHeight: (index: number) => number | undefined
-  /**
-   * Scroll so item `i` is in the mounted range. Sets scrollTop =
-   * offsets[i] + listOrigin. The range logic finds start from
-   * scrollTop vs offsets[] — BOTH use the same offsets value, so they
-   * agree by construction regardless of whether offsets[i] is the
-   * "true" position. Item i mounts; its screen position may be off by
-   * a few-dozen rows (overscan-worth of estimate drift), but it's in
-   * the DOM. Follow with getItemTop(i) for the precise position.
-   */
-  scrollToIndex: (i: number) => void
-}
-
-/**
- * React-level virtualization for items inside a ScrollBox.
- *
- * The ScrollBox already does Ink-output-level viewport culling
- * (render-node-to-output.ts:617 skips children outside the visible window),
- * but all React fibers + Yoga nodes are still allocated. At ~250 KB RSS per
- * MessageRow, a 1000-message session costs ~250 MB of grow-only memory
- * (Ink screen buffer, WASM linear memory, JSC page retention all grow-only).
- *
- * This hook mounts only items in viewport + overscan. Spacer boxes hold the
- * scroll height constant for the rest at O(1) fiber cost each.
- *
- * Height estimation: fixed DEFAULT_ESTIMATE for unmeasured items, replaced
- * by real Yoga heights after first layout. No scroll anchoring — overscan
- * absorbs estimate errors. If drift is noticeable in practice, anchoring
- * (scrollBy(delta) when topSpacer changes) is a straightforward followup.
- *
- * stickyScroll caveat: render-node-to-output.ts:450 sets scrollTop=maxScroll
- * during Ink's render phase, which does NOT fire ScrollBox.subscribe. The
- * at-bottom check below handles this — when pinned to the bottom, we render
- * the last N items regardless of what scrollTop claims.
- */
-export function useVirtualScroll(
-  scrollRef: RefObject<ScrollBoxHandle | null>,
-  itemKeys: readonly string[],
-  /**
-   * Terminal column count. On change, cached heights are stale (text
-   * rewraps) — SCALED by oldCols/newCols rather than cleared. Clearing
-   * made the pessimistic coverage back-walk mount ~190 items (every
-   * uncached item → PESSIMISTIC_HEIGHT=1 → walk 190 to reach
-   * viewport+2×overscan). Each fresh mount runs marked.lexer + syntax
-   * highlighting ≈ 3ms; ~600ms React reconcile on first resize with a
-   * long conversation. Scaling keeps heightCache populated → back-walk
-   * uses real-ish heights → mount range stays tight. Scaled estimates
-   * are overwritten by real Yoga heights on next useLayoutEffect.
-   *
-   * Scaled heights are close enough that the black-screen-on-widen bug
-   * (inflated pre-resize offsets overshoot post-resize scrollTop → end
-   * loop stops short of tail) doesn't trigger: ratio<1 on widen scales
-   * heights DOWN, keeping offsets roughly aligned with post-resize Yoga.
-   */
-  columns: number,
-): VirtualScrollResult {
-  const heightCache = useRef(new Map<string, number>())
-  // Bump whenever heightCache mutates so offsets rebuild on next read. Ref
-  // (not state) — checked during render phase, zero extra commits.
-  const offsetVersionRef = useRef(0)
-  // scrollTop at last commit, for detecting fast-scroll mode (slide cap gate).
-  const lastScrollTopRef = useRef(0)
-  const offsetsRef = useRef<{ arr: Float64Array; version: number; n: number }>({
-    arr: new Float64Array(0),
-    version: -1,
-    n: -1,
-  })
-  const itemRefs = useRef(new Map<string, DOMElement>())
-  const refCache = useRef(new Map<string, (el: DOMElement | null) => void>())
-  // Inline ref-compare: must run before offsets is computed below. The
-  // skip-flag guards useLayoutEffect from re-populating heightCache with
-  // PRE-resize Yoga heights (useLayoutEffect reads Yoga from the frame
-  // BEFORE this render's calculateLayout — the one that had the old width).
-  // Next render's useLayoutEffect reads post-resize Yoga → correct.
-  const prevColumns = useRef(columns)
-  const skipMeasurementRef = useRef(false)
-  // Freeze the mount range for the resize-settling cycle. Already-mounted
-  // items have warm useMemo (marked.lexer, highlighting); recomputing range
-  // from scaled/pessimistic estimates causes mount/unmount churn (~3ms per
-  // fresh mount = ~150ms visible as a second flash). The pre-resize range is
-  // as good as any — items visible at old width are what the user wants at
-  // new width. Frozen for 2 renders: render #1 has skipMeasurement (Yoga
-  // still pre-resize), render #2's useLayoutEffect reads post-resize Yoga
-  // into heightCache. Render #3 has accurate heights → normal recompute.
-  const prevRangeRef = useRef<readonly [number, number] | null>(null)
-  const freezeRendersRef = useRef(0)
-  if (prevColumns.current !== columns) {
-    const ratio = prevColumns.current / columns
-    prevColumns.current = columns
-    for (const [k, h] of heightCache.current) {
-      heightCache.current.set(k, Math.max(1, Math.round(h * ratio)))
-    }
-    offsetVersionRef.current++
-    skipMeasurementRef.current = true
-    freezeRendersRef.current = 2
-  }
-  const frozenRange = freezeRendersRef.current > 0 ? prevRangeRef.current : null
-  // List origin in content-wrapper coords. scrollTop is content-wrapper-
-  // relative, but offsets[] are list-local (0 = first virtualized item).
-  // Siblings that render BEFORE this list inside the ScrollBox — Logo,
-  // StatusNotices, truncation divider in Messages.tsx — shift item Yoga
-  // positions by their cumulative height. Without subtracting this, the
-  // non-sticky branch's effLo/effHi are inflated and start advances past
-  // items that are actually in view (blank viewport on click/scroll when
-  // sticky breaks while scrollTop is near max). Read from the topSpacer's
-  // Yoga computedTop — it's the first child of the virtualized region, so
-  // its top IS listOrigin. No subtraction of offsets → no drift when item
-  // heights change between renders (tmux resize: columns change → re-wrap
-  // → heights shrink → the old item-sample subtraction went negative →
-  // effLo inflated → black screen). One-frame lag like heightCache.
-  const listOriginRef = useRef(0)
-  const spacerRef = useRef<DOMElement | null>(null)
-
-  // useSyncExternalStore ties re-renders to imperative scroll. Snapshot is
-  // scrollTop QUANTIZED to SCROLL_QUANTUM bins — Object.is sees no change
-  // for small scrolls (most wheel ticks), so React skips the commit + Yoga
-  // + Ink cycle entirely until the accumulated delta crosses a bin.
-  // Sticky is folded into the snapshot (sign bit) so sticky→broken also
-  // triggers: scrollToBottom sets sticky=true without moving scrollTop
-  // (Ink moves it later), and the first scrollBy after may land in the
-  // same bin. NaN sentinel = ref not attached.
-  const subscribe = useCallback(
-    (listener: () => void) =>
-      scrollRef.current?.subscribe(listener) ?? NOOP_UNSUB,
-    [scrollRef],
-  )
-  useSyncExternalStore(subscribe, () => {
-    const s = scrollRef.current
-    if (!s) return NaN
-    // Snapshot uses the TARGET (scrollTop + pendingDelta), not committed
-    // scrollTop. scrollBy only mutates pendingDelta (renderer drains it
-    // across frames); committed scrollTop lags. Using target means
-    // notify() on scrollBy actually changes the snapshot → React remounts
-    // children for the destination before Ink's drain frames need them.
-    const target = s.getScrollTop() + s.getPendingDelta()
-    const bin = Math.floor(target / SCROLL_QUANTUM)
-    return s.isSticky() ? ~bin : bin
-  })
-  // Read the REAL committed scrollTop (not quantized) for range math —
-  // quantization is only the re-render gate, not the position.
-  const scrollTop = scrollRef.current?.getScrollTop() ?? -1
-  // Range must span BOTH committed scrollTop (where Ink is rendering NOW)
-  // and target (where pending will drain to). During drain, intermediate
-  // frames render at scrollTops between the two — if we only mount for
-  // the target, those frames find no children (blank rows).
-  const pendingDelta = scrollRef.current?.getPendingDelta() ?? 0
-  const viewportH = scrollRef.current?.getViewportHeight() ?? 0
-  // True means the ScrollBox is pinned to the bottom. This is the ONLY
-  // stable "at bottom" signal: scrollTop/scrollHeight both reflect the
-  // PREVIOUS render's layout, which depends on what WE rendered (topSpacer +
-  // items), creating a feedback loop (range → layout → atBottom → range).
-  // stickyScroll is set by user action (scrollToBottom/scrollBy), the initial
-  // attribute, AND by render-node-to-output when its positional follow fires
-  // (scrollTop>=prevMax → pin to new max → set flag). The renderer write is
-  // feedback-safe: it only flips false→true, only when already at the
-  // positional bottom, and the flag being true here just means "tail-walk,
-  // clear clamp" — the same behavior as if we'd read scrollTop==maxScroll
-  // directly, minus the instability. Default true: before the ref attaches,
-  // assume bottom (sticky will pin us there on first Ink render).
-  const isSticky = scrollRef.current?.isSticky() ?? true
-
-  // GC stale cache entries (compaction, /clear, screenToggleId bump). Only
-  // runs when itemKeys identity changes — scrolling doesn't touch keys.
-  // itemRefs self-cleans via ref(null) on unmount.
-  // eslint-disable-next-line react-hooks/exhaustive-deps -- refs are stable
-  useMemo(() => {
-    const live = new Set(itemKeys)
-    let dirty = false
-    for (const k of heightCache.current.keys()) {
-      if (!live.has(k)) {
-        heightCache.current.delete(k)
-        dirty = true
-      }
-    }
-    for (const k of refCache.current.keys()) {
-      if (!live.has(k)) refCache.current.delete(k)
-    }
-    if (dirty) offsetVersionRef.current++
-  }, [itemKeys])
-
-  // Offsets cached across renders, invalidated by offsetVersion ref bump.
-  // The previous approach allocated new Array(n+1) + ran n Map.get per
-  // render; for n≈27k at key-repeat scroll rate (~11 commits/sec) that's
-  // ~300k lookups/sec on a freshly-allocated array → GC churn + ~2ms/render.
-  // Version bumped by heightCache writers (measureRef, resize-scale, GC).
-  // No setState — the rebuild is read-side-lazy via ref version check during
-  // render (same commit, zero extra schedule). The flicker that forced
-  // inline-recompute came from setState-driven invalidation.
-  const n = itemKeys.length
-  if (
-    offsetsRef.current.version !== offsetVersionRef.current ||
-    offsetsRef.current.n !== n
-  ) {
-    const arr =
-      offsetsRef.current.arr.length >= n + 1
-        ? offsetsRef.current.arr
-        : new Float64Array(n + 1)
-    arr[0] = 0
-    for (let i = 0; i < n; i++) {
-      arr[i + 1] =
-        arr[i]! + (heightCache.current.get(itemKeys[i]!) ?? DEFAULT_ESTIMATE)
-    }
-    offsetsRef.current = { arr, version: offsetVersionRef.current, n }
-  }
-  const offsets = offsetsRef.current.arr
-  const totalHeight = offsets[n]!
-
-  let start: number
-  let end: number
-
-  if (frozenRange) {
-    // Column just changed. Keep the pre-resize range to avoid mount churn.
-    // Clamp to n in case messages were removed (/clear, compaction).
-    ;[start, end] = frozenRange
-    start = Math.min(start, n)
-    end = Math.min(end, n)
-  } else if (viewportH === 0 || scrollTop < 0) {
-    // Cold start: ScrollBox hasn't laid out yet. Render the tail — sticky
-    // scroll pins to the bottom on first Ink render, so these are the items
-    // the user actually sees. Any scroll-up after that goes through
-    // scrollBy → subscribe fires → we re-render with real values.
-    start = Math.max(0, n - COLD_START_COUNT)
-    end = n
-  } else {
-    if (isSticky) {
-      // Sticky-scroll fallback. render-node-to-output may have moved scrollTop
-      // without notifying us, so trust "at bottom" over the stale snapshot.
-      // Walk back from the tail until we've covered viewport + overscan.
-      const budget = viewportH + OVERSCAN_ROWS
-      start = n
-      while (start > 0 && totalHeight - offsets[start - 1]! < budget) {
-        start--
-      }
-      end = n
-    } else {
-      // User has scrolled up. Compute start from offsets (estimate-based:
-      // may undershoot which is fine — we just start mounting a bit early).
-      // Then extend end by CUMULATIVE BEST-KNOWN HEIGHT, not estimated
-      // offsets. The invariant is:
-      //   topSpacer + sum(real_heights[start..end]) >= scrollTop + viewportH + overscan
-      // Since topSpacer = offsets[start] ≤ scrollTop - overscan, we need:
-      //   sum(real_heights) >= viewportH + 2*overscan
-      // For unmeasured items, assume PESSIMISTIC_HEIGHT=1 — the smallest a
-      // MessageRow can be. This over-mounts when items are large, but NEVER
-      // leaves the viewport showing empty spacer during fast scroll through
-      // unmeasured territory. Once heights are cached (next render),
-      // coverage is computed with real values and the range tightens.
-      // Advance start past item K only if K is safe to fold into topSpacer
-      // without a visible jump. Two cases are safe:
-      //   (a) K is NOT currently mounted (itemRefs has no entry). Its
-      //       contribution to offsets has ALWAYS been the estimate — the
-      //       spacer already matches what was there. No layout change.
-      //   (b) K is mounted AND its height is cached. offsets[start+1] uses
-      //       the real height, so topSpacer = offsets[start+1] exactly
-      //       equals the Yoga span K occupied. Seamless unmount.
-      // The unsafe case — K is mounted but uncached — is the one-render
-      // window between mount and useLayoutEffect measurement. Keeping K
-      // mounted that one extra render lets the measurement land.
-      // Mount range spans [committed, target] so every drain frame is
-      // covered. Clamp at 0: aggressive wheel-up can push pendingDelta
-      // far past zero (MX Master free-spin), but scrollTop never goes
-      // negative. Without the clamp, effLo drags start to 0 while effHi
-      // stays at the current (high) scrollTop — span exceeds what
-      // MAX_MOUNTED_ITEMS can cover and early drain frames see blank.
-      // listOrigin translates scrollTop (content-wrapper coords) into
-      // list-local coords before comparing against offsets[]. Without
-      // this, pre-list siblings (Logo+notices in Messages.tsx) inflate
-      // scrollTop by their height and start over-advances — eats overscan
-      // first, then visible rows once the inflation exceeds OVERSCAN_ROWS.
-      const listOrigin = listOriginRef.current
-      // Cap the [committed..target] span. When input outpaces render,
-      // pendingDelta grows unbounded → effLo..effHi covers hundreds of
-      // unmounted rows → one commit mounts 194 fresh MessageRows → 3s+
-      // sync block → more input queues → bigger delta next time. Death
-      // spiral. Capping the span bounds fresh mounts per commit; the
-      // clamp (setClampBounds) shows edge-of-mounted during catch-up so
-      // there's no blank screen — scroll reaches target over a few
-      // frames instead of freezing once for seconds.
-      const MAX_SPAN_ROWS = viewportH * 3
-      const rawLo = Math.min(scrollTop, scrollTop + pendingDelta)
-      const rawHi = Math.max(scrollTop, scrollTop + pendingDelta)
-      const span = rawHi - rawLo
-      const clampedLo =
-        span > MAX_SPAN_ROWS
-          ? pendingDelta < 0
-            ? rawHi - MAX_SPAN_ROWS // scrolling up: keep near target (low end)
-            : rawLo // scrolling down: keep near committed
-          : rawLo
-      const clampedHi = clampedLo + Math.min(span, MAX_SPAN_ROWS)
-      const effLo = Math.max(0, clampedLo - listOrigin)
-      const effHi = clampedHi - listOrigin
-      const lo = effLo - OVERSCAN_ROWS
-      // Binary search for start — offsets is monotone-increasing. The
-      // linear while(start++) scan iterated ~27k times per render for the
-      // 27k-msg session (scrolling from bottom, start≈27200). O(log n).
-      {
-        let l = 0
-        let r = n
-        while (l < r) {
-          const m = (l + r) >> 1
-          if (offsets[m + 1]! <= lo) l = m + 1
-          else r = m
-        }
-        start = l
-      }
-      // Guard: don't advance past mounted-but-unmeasured items. During the
-      // one-render window between mount and useLayoutEffect measurement,
-      // unmounting such items would use DEFAULT_ESTIMATE in topSpacer,
-      // which doesn't match their (unknown) real span → flicker. Mounted
-      // items are in [prevStart, prevEnd); scan that, not all n.
-      {
-        const p = prevRangeRef.current
-        if (p && p[0] < start) {
-          for (let i = p[0]; i < Math.min(start, p[1]); i++) {
-            const k = itemKeys[i]!
-            if (itemRefs.current.has(k) && !heightCache.current.has(k)) {
-              start = i
-              break
-            }
-          }
-        }
-      }
-
-      const needed = viewportH + 2 * OVERSCAN_ROWS
-      const maxEnd = Math.min(n, start + MAX_MOUNTED_ITEMS)
-      let coverage = 0
-      end = start
-      while (
-        end < maxEnd &&
-        (coverage < needed || offsets[end]! < effHi + viewportH + OVERSCAN_ROWS)
-      ) {
-        coverage +=
-          heightCache.current.get(itemKeys[end]!) ?? PESSIMISTIC_HEIGHT
-        end++
-      }
-    }
-    // Same coverage guarantee for the atBottom path (it walked start back
-    // by estimated offsets, which can undershoot if items are small).
-    const needed = viewportH + 2 * OVERSCAN_ROWS
-    const minStart = Math.max(0, end - MAX_MOUNTED_ITEMS)
-    let coverage = 0
-    for (let i = start; i < end; i++) {
-      coverage += heightCache.current.get(itemKeys[i]!) ?? PESSIMISTIC_HEIGHT
-    }
-    while (start > minStart && coverage < needed) {
-      start--
-      coverage +=
-        heightCache.current.get(itemKeys[start]!) ?? PESSIMISTIC_HEIGHT
-    }
-    // Slide cap: limit how many NEW items mount this commit. Scrolling into
-    // a fresh range would otherwise mount 194 items at PESSIMISTIC_HEIGHT=1
-    // coverage — ~290ms React render block. Gates on scroll VELOCITY
-    // (|scrollTop delta since last commit| > 2×viewportH — key-repeat PageUp
-    // moves ~viewportH/2 per press, 3+ presses batched = fast mode). Covers
-    // both scrollBy (pendingDelta) and scrollTo (direct write). Normal
-    // single-PageUp or sticky-break jumps skip this. The clamp
-    // (setClampBounds) holds the viewport at the mounted edge during
-    // catch-up. Only caps range GROWTH; shrinking is unbounded.
-    const prev = prevRangeRef.current
-    const scrollVelocity =
-      Math.abs(scrollTop - lastScrollTopRef.current) + Math.abs(pendingDelta)
-    if (prev && scrollVelocity > viewportH * 2) {
-      const [pS, pE] = prev
-      if (start < pS - SLIDE_STEP) start = pS - SLIDE_STEP
-      if (end > pE + SLIDE_STEP) end = pE + SLIDE_STEP
-      // A large forward jump can push start past the capped end (start
-      // advances via binary search while end is capped at pE + SLIDE_STEP).
-      // Mount SLIDE_STEP items from the new start so the viewport isn't
-      // blank during catch-up.
-      if (start > end) end = Math.min(start + SLIDE_STEP, n)
-    }
-    lastScrollTopRef.current = scrollTop
-  }
-
-  // Decrement freeze AFTER range is computed. Don't update prevRangeRef
-  // during freeze so both frozen renders reuse the ORIGINAL pre-resize
-  // range (not the clamped-to-n version if messages changed mid-freeze).
-  if (freezeRendersRef.current > 0) {
-    freezeRendersRef.current--
-  } else {
-    prevRangeRef.current = [start, end]
-  }
-  // useDeferredValue lets React render with the OLD range first (cheap —
-  // all memo hits) then transition to the NEW range (expensive — fresh
-  // mounts with marked.lexer + formatToken). The urgent render keeps Ink
-  // painting at input rate; fresh mounts happen in a non-blocking
-  // background render. This is React's native time-slicing: the 62ms
-  // fresh-mount block becomes interruptible. The clamp (setClampBounds)
-  // already handles viewport pinning so there's no visual artifact from
-  // the deferred range lagging briefly behind scrollTop.
-  //
-  // Only defer range GROWTH (start moving earlier / end moving later adds
-  // fresh mounts). Shrinking is cheap (unmount = remove fiber, no parse)
-  // and the deferred value lagging shrink causes stale overscan to stay
-  // mounted one extra tick — harmless but fails tests checking exact
-  // range after measurement-driven tightening.
-  const dStart = useDeferredValue(start)
-  const dEnd = useDeferredValue(end)
-  let effStart = start < dStart ? dStart : start
-  let effEnd = end > dEnd ? dEnd : end
-  // A large jump can make effStart > effEnd (start jumps forward while dEnd
-  // still holds the old range's end). Skip deferral to avoid an inverted
-  // range. Also skip when sticky — scrollToBottom needs the tail mounted
-  // NOW so scrollTop=maxScroll lands on content, not bottomSpacer. The
-  // deferred dEnd (still at old range) would render an incomplete tail,
-  // maxScroll stays at the old content height, and "jump to bottom" stops
-  // short. Sticky snap is a single frame, not continuous scroll — the
-  // time-slicing benefit doesn't apply.
-  if (effStart > effEnd || isSticky) {
-    effStart = start
-    effEnd = end
-  }
-  // Scrolling DOWN (pendingDelta > 0): bypass effEnd deferral so the tail
-  // mounts immediately. Without this, the clamp (based on effEnd) holds
-  // scrollTop short of the real bottom — user scrolls down, hits clampMax,
-  // stops, React catches up effEnd, clampMax widens, but the user already
-  // released. Feels stuck-before-bottom. effStart stays deferred so
-  // scroll-UP keeps time-slicing (older messages parse on mount — the
-  // expensive direction).
-  if (pendingDelta > 0) {
-    effEnd = end
-  }
-  // Final O(viewport) enforcement. The intermediate caps (maxEnd=start+
-  // MAX_MOUNTED_ITEMS, slide cap, deferred-intersection) bound [start,end]
-  // but the deferred+bypass combinations above can let [effStart,effEnd]
-  // slip: e.g. during sustained PageUp when concurrent mode interleaves
-  // dStart updates with effEnd=end bypasses across commits, the effective
-  // window can drift wider than either immediate or deferred alone. On a
-  // 10K-line resumed session this showed as +270MB RSS during PageUp spam
-  // (yoga Node constructor + createWorkInProgress fiber alloc proportional
-  // to scroll distance). Trim the far edge — by viewport position — to keep
-  // fiber count O(viewport) regardless of deferred-value scheduling.
-  if (effEnd - effStart > MAX_MOUNTED_ITEMS) {
-    // Trim side is decided by viewport POSITION, not pendingDelta direction.
-    // pendingDelta drains to 0 between frames while dStart/dEnd lag under
-    // concurrent scheduling; a direction-based trim then flips from "trim
-    // tail" to "trim head" mid-settle, bumping effStart → effTopSpacer →
-    // clampMin → setClampBounds yanks scrollTop down → scrollback vanishes.
-    // Position-based: keep whichever end the viewport is closer to.
-    const mid = (offsets[effStart]! + offsets[effEnd]!) / 2
-    if (scrollTop - listOriginRef.current < mid) {
-      effEnd = effStart + MAX_MOUNTED_ITEMS
-    } else {
-      effStart = effEnd - MAX_MOUNTED_ITEMS
-    }
-  }
-
-  // Write render-time clamp bounds in a layout effect (not during render —
-  // mutating DOM during React render violates purity). render-node-to-output
-  // clamps scrollTop to this span so burst scrollTo calls that race past
-  // React's async re-render show the EDGE of mounted content (the last/first
-  // visible message) instead of blank spacer.
-  //
-  // Clamp MUST use the EFFECTIVE (deferred) range, not the immediate one.
-  // During fast scroll, immediate [start,end] may already cover the new
-  // scrollTop position, but the children still render at the deferred
-  // (older) range. If clamp uses immediate bounds, the drain-gate in
-  // render-node-to-output sees scrollTop within clamp → drains past the
-  // deferred children's span → viewport lands in spacer → white flash.
-  // Using effStart/effEnd keeps clamp synced with what's actually mounted.
-  //
-  // Skip clamp when sticky — render-node-to-output pins scrollTop=maxScroll
-  // authoritatively. Clamping during cold-start/load causes flicker: first
-  // render uses estimate-based offsets, clamp set, sticky-follow moves
-  // scrollTop, measurement fires, offsets rebuild with real heights, second
-  // render's clamp differs → scrollTop clamp-adjusts → content shifts.
-  const listOrigin = listOriginRef.current
-  const effTopSpacer = offsets[effStart]!
-  // At effStart=0 there's no unmounted content above — the clamp must allow
-  // scrolling past listOrigin to see pre-list content (logo, header) that
-  // sits in the ScrollBox but outside VirtualMessageList. Only clamp when
-  // the topSpacer is nonzero (there ARE unmounted items above).
-  const clampMin = effStart === 0 ? 0 : effTopSpacer + listOrigin
-  // At effEnd=n there's no bottomSpacer — nothing to avoid racing past. Using
-  // offsets[n] here would bake in heightCache (one render behind Yoga), and
-  // when the tail item is STREAMING its cached height lags its real height by
-  // however much arrived since last measure. Sticky-break then clamps
-  // scrollTop below the real max, pushing the streaming text off-viewport
-  // (the "scrolled up, response disappeared" bug). Infinity = unbounded:
-  // render-node-to-output's own Math.min(cur, maxScroll) governs instead.
-  const clampMax =
-    effEnd === n
-      ? Infinity
-      : Math.max(effTopSpacer, offsets[effEnd]! - viewportH) + listOrigin
-  useLayoutEffect(() => {
-    if (isSticky) {
-      scrollRef.current?.setClampBounds(undefined, undefined)
-    } else {
-      scrollRef.current?.setClampBounds(clampMin, clampMax)
-    }
-  })
-
-  // Measure heights from the PREVIOUS Ink render. Runs every commit (no
-  // deps) because Yoga recomputes layout without React knowing. yogaNode
-  // heights for items mounted ≥1 frame ago are valid; brand-new items
-  // haven't been laid out yet (that happens in resetAfterCommit → onRender,
-  // after this effect).
-  //
-  // Distinguishing "h=0: Yoga hasn't run" (transient, skip) from "h=0:
-  // MessageRow rendered null" (permanent, cache it): getComputedWidth() > 0
-  // proves Yoga HAS laid out this node (width comes from the container,
-  // always non-zero for a Box in a column). If width is set and height is
-  // 0, the item is genuinely empty — cache 0 so the start-advance gate
-  // doesn't block on it forever. Without this, a null-rendering message
-  // at the start boundary freezes the range (seen as blank viewport when
-  // scrolling down after scrolling up).
-  //
-  // NO setState. A setState here would schedule a second commit with
-  // shifted offsets, and since Ink writes stdout on every commit
-  // (reconciler.resetAfterCommit → onRender), that's two writes with
-  // different spacer heights → visible flicker. Heights propagate to
-  // offsets on the next natural render. One-frame lag, absorbed by overscan.
-  useLayoutEffect(() => {
-    const spacerYoga = spacerRef.current?.yogaNode
-    if (spacerYoga && spacerYoga.getComputedWidth() > 0) {
-      listOriginRef.current = spacerYoga.getComputedTop()
-    }
-    if (skipMeasurementRef.current) {
-      skipMeasurementRef.current = false
-      return
-    }
-    let anyChanged = false
-    for (const [key, el] of itemRefs.current) {
-      const yoga = el.yogaNode
-      if (!yoga) continue
-      const h = yoga.getComputedHeight()
-      const prev = heightCache.current.get(key)
-      if (h > 0) {
-        if (prev !== h) {
-          heightCache.current.set(key, h)
-          anyChanged = true
-        }
-      } else if (yoga.getComputedWidth() > 0 && prev !== 0) {
-        heightCache.current.set(key, 0)
-        anyChanged = true
-      }
-    }
-    if (anyChanged) offsetVersionRef.current++
-  })
-
-  // Stable per-key callback refs. React's ref-swap dance (old(null) then
-  // new(el)) is a no-op when the callback is identity-stable, avoiding
-  // itemRefs churn on every render. GC'd alongside heightCache above.
-  // The ref(null) path also captures height at unmount — the yogaNode is
-  // still valid then (reconciler calls ref(null) before removeChild →
-  // freeRecursive), so we get the final measurement before WASM release.
-  const measureRef = useCallback((key: string) => {
-    let fn = refCache.current.get(key)
-    if (!fn) {
-      fn = (el: DOMElement | null) => {
-        if (el) {
-          itemRefs.current.set(key, el)
-        } else {
-          const yoga = itemRefs.current.get(key)?.yogaNode
-          if (yoga && !skipMeasurementRef.current) {
-            const h = yoga.getComputedHeight()
-            if (
-              (h > 0 || yoga.getComputedWidth() > 0) &&
-              heightCache.current.get(key) !== h
-            ) {
-              heightCache.current.set(key, h)
-              offsetVersionRef.current++
-            }
-          }
-          itemRefs.current.delete(key)
-        }
-      }
-      refCache.current.set(key, fn)
-    }
-    return fn
-  }, [])
-
-  const getItemTop = useCallback(
-    (index: number) => {
-      const yoga = itemRefs.current.get(itemKeys[index]!)?.yogaNode
-      if (!yoga || yoga.getComputedWidth() === 0) return -1
-      return yoga.getComputedTop()
-    },
-    [itemKeys],
-  )
-
-  const getItemElement = useCallback(
-    (index: number) => itemRefs.current.get(itemKeys[index]!) ?? null,
-    [itemKeys],
-  )
-  const getItemHeight = useCallback(
-    (index: number) => heightCache.current.get(itemKeys[index]!),
-    [itemKeys],
-  )
-  const scrollToIndex = useCallback(
-    (i: number) => {
-      // offsetsRef.current holds latest cached offsets (event handlers run
-      // between renders; a render-time closure would be stale).
-      const o = offsetsRef.current
-      if (i < 0 || i >= o.n) return
-      scrollRef.current?.scrollTo(o.arr[i]! + listOriginRef.current)
-    },
-    [scrollRef],
-  )
-
-  const effBottomSpacer = totalHeight - offsets[effEnd]!
-
-  return {
-    range: [effStart, effEnd],
-    topSpacer: effTopSpacer,
-    bottomSpacer: effBottomSpacer,
-    measureRef,
-    spacerRef,
-    offsets,
-    getItemTop,
-    getItemElement,
-    getItemHeight,
-    scrollToIndex,
-  }
-}