rocksdb-native 2.6.2 → 2.6.4

package/vendor/librocksdb/vendor/rocksdb/util/xxph3.h

@@ -1,1760 +0,0 @@
-//  Copyright (c) Facebook, Inc. and its affiliates. All Rights Reserved.
-//  This source code is licensed under both the GPLv2 (found in the
-//  COPYING file in the root directory) and Apache 2.0 License
-//  (found in the LICENSE.Apache file in the root directory).
-/*
-   xxHash - Extremely Fast Hash algorithm
-   Header File
-   Copyright (C) 2012-2016, Yann Collet.
-
-   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-       * Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-       * Redistributions in binary form must reproduce the above
-   copyright notice, this list of conditions and the following disclaimer
-   in the documentation and/or other materials provided with the
-   distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-   You can contact the author at :
-   - xxHash source repository : https://github.com/Cyan4973/xxHash
-*/
-
-// This is a fork of a preview version of xxHash, as RocksDB depends on
-// this preview version of XXH3. To allow this to coexist with the
-// standard xxHash, including in the "unity" build where all source files
-// and headers go into a single translation unit, here "XXH" has been
-// replaced with "XXPH" for XX Preview Hash.
-
-#ifndef XXPHASH_H_5627135585666179
-#define XXPHASH_H_5627135585666179 1
-
-/* BEGIN RocksDB customizations */
-#ifndef XXPH_STATIC_LINKING_ONLY
-// Access experimental APIs
-#define XXPH_STATIC_LINKING_ONLY 1
-#endif
-#define XXPH_NAMESPACE ROCKSDB_
-#define XXPH_INLINE_ALL
-#include <cstring>
-/* END RocksDB customizations */
-
-// clang-format off
-#if defined (__cplusplus)
-extern "C" {
-#endif
-
-
-/* ****************************
-*  Definitions
-******************************/
-#include <stddef.h>   /* size_t */
-typedef enum { XXPH_OK=0, XXPH_ERROR } XXPH_errorcode;
-
-
-/* ****************************
- *  API modifier
- ******************************/
-/** XXPH_INLINE_ALL (and XXPH_PRIVATE_API)
- *  This build macro includes xxhash functions in `static` mode
- *  in order to inline them, and remove their symbol from the public list.
- *  Inlining offers great performance improvement on small keys,
- *  and dramatic ones when length is expressed as a compile-time constant.
- *  See https://fastcompression.blogspot.com/2018/03/xxhash-for-small-keys-impressive-power.html .
- *  Methodology :
- *     #define XXPH_INLINE_ALL
- *     #include "xxhash.h"
- * `xxhash.c` is automatically included.
- *  It's not useful to compile and link it as a separate object.
- */
-#if defined(XXPH_INLINE_ALL) || defined(XXPH_PRIVATE_API)
-#  ifndef XXPH_STATIC_LINKING_ONLY
-#    define XXPH_STATIC_LINKING_ONLY
-#  endif
-#  if defined(__GNUC__)
-#    define XXPH_PUBLIC_API static __inline __attribute__((unused))
-#  elif defined (__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
-#    define XXPH_PUBLIC_API static inline
-#  elif defined(_MSC_VER)
-#    define XXPH_PUBLIC_API static __inline
-#  else
-     /* this version may generate warnings for unused static functions */
-#    define XXPH_PUBLIC_API static
-#  endif
-#else
-#  if defined(WIN32) && defined(_MSC_VER) && (defined(XXPH_IMPORT) || defined(XXPH_EXPORT))
-#    ifdef XXPH_EXPORT
-#      define XXPH_PUBLIC_API __declspec(dllexport)
-#    elif XXPH_IMPORT
-#      define XXPH_PUBLIC_API __declspec(dllimport)
-#    endif
-#  else
-#    define XXPH_PUBLIC_API   /* do nothing */
-#  endif
-#endif /* XXPH_INLINE_ALL || XXPH_PRIVATE_API */
-
-/*! XXPH_NAMESPACE, aka Namespace Emulation :
- *
- * If you want to include _and expose_ xxHash functions from within your own library,
- * but also want to avoid symbol collisions with other libraries which may also include xxHash,
- *
- * you can use XXPH_NAMESPACE, to automatically prefix any public symbol from xxhash library
- * with the value of XXPH_NAMESPACE (therefore, avoid NULL and numeric values).
- *
- * Note that no change is required within the calling program as long as it includes `xxhash.h` :
- * regular symbol name will be automatically translated by this header.
- */
-#ifdef XXPH_NAMESPACE
-#  define XXPH_CAT(A,B) A##B
-#  define XXPH_NAME2(A,B) XXPH_CAT(A,B)
-#  define XXPH_versionNumber XXPH_NAME2(XXPH_NAMESPACE, XXPH_versionNumber)
-#endif
-
-
-/* *************************************
-*  Version
-***************************************/
-#define XXPH_VERSION_MAJOR    0
-#define XXPH_VERSION_MINOR    7
-#define XXPH_VERSION_RELEASE  2
-#define XXPH_VERSION_NUMBER  (XXPH_VERSION_MAJOR *100*100 + XXPH_VERSION_MINOR *100 + XXPH_VERSION_RELEASE)
-XXPH_PUBLIC_API unsigned XXPH_versionNumber (void);
-
-
-/*-**********************************************************************
-*  32-bit hash
-************************************************************************/
-#if !defined (__VMS) \
-  && (defined (__cplusplus) \
-  || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */) )
-#   include <stdint.h>
-    typedef uint32_t XXPH32_hash_t;
-#else
-#   include <limits.h>
-#   if UINT_MAX == 0xFFFFFFFFUL
-      typedef unsigned int XXPH32_hash_t;
-#   else
-#     if ULONG_MAX == 0xFFFFFFFFUL
-        typedef unsigned long XXPH32_hash_t;
-#     else
-#       error "unsupported platform : need a 32-bit type"
-#     endif
-#   endif
-#endif
-
-#ifndef XXPH_NO_LONG_LONG
-/*-**********************************************************************
-*  64-bit hash
-************************************************************************/
-#if !defined (__VMS) \
-  && (defined (__cplusplus) \
-  || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */) )
-#   include <stdint.h>
-    typedef uint64_t XXPH64_hash_t;
-#else
-    /* the following type must have a width of 64-bit */
-    typedef unsigned long long XXPH64_hash_t;
-#endif
-
-#endif  /* XXPH_NO_LONG_LONG */
-
-
-
-#ifdef XXPH_STATIC_LINKING_ONLY
-
-/* ================================================================================================
-   This section contains declarations which are not guaranteed to remain stable.
-   They may change in future versions, becoming incompatible with a different version of the library.
-   These declarations should only be used with static linking.
-   Never use them in association with dynamic linking !
-=================================================================================================== */
-
-
-/*-**********************************************************************
-*  XXPH3
-*  New experimental hash
-************************************************************************/
-#ifndef XXPH_NO_LONG_LONG
-
-
-/* ============================================
- * XXPH3 is a new hash algorithm,
- * featuring improved speed performance for both small and large inputs.
- * See full speed analysis at : http://fastcompression.blogspot.com/2019/03/presenting-xxh3.html
- * In general, expect XXPH3 to run about ~2x faster on large inputs,
- * and >3x faster on small ones, though exact differences depend on platform.
- *
- * The algorithm is portable, will generate the same hash on all platforms.
- * It benefits greatly from vectorization units, but does not require it.
- *
- * XXPH3 offers 2 variants, _64bits and _128bits.
- * When only 64 bits are needed, prefer calling the _64bits variant :
- * it reduces the amount of mixing, resulting in faster speed on small inputs.
- * It's also generally simpler to manipulate a scalar return type than a struct.
- *
- * The XXPH3 algorithm is still considered experimental.
- * Produced results can still change between versions.
- * Results produced by v0.7.x are not comparable with results from v0.7.y .
- * It's nonetheless possible to use XXPH3 for ephemeral data (local sessions),
- * but avoid storing values in long-term storage for later reads.
- *
- * The API supports one-shot hashing, streaming mode, and custom secrets.
- *
- * There are still a number of opened questions that community can influence during the experimental period.
- * I'm trying to list a few of them below, though don't consider this list as complete.
- *
- * - 128-bits output type : currently defined as a structure of two 64-bits fields.
- *                          That's because 128-bit values do not exist in C standard.
- *                          Note that it means that, at byte level, result is not identical depending on endianess.
- *                          However, at field level, they are identical on all platforms.
- *                          The canonical representation solves the issue of identical byte-level representation across platforms,
- *                          which is necessary for serialization.
- *                          Q1 : Would there be a better representation for a 128-bit hash result ?
- *                          Q2 : Are the names of the inner 64-bit fields important ? Should they be changed ?
- *
- * - Prototype XXPH128() :   XXPH128() uses the same arguments as XXPH64(), for consistency.
- *                          It means it maps to XXPH3_128bits_withSeed().
- *                          This variant is slightly slower than XXPH3_128bits(),
- *                          because the seed is now part of the algorithm, and can't be simplified.
- *                          Is that a good idea ?
- *
- * - Seed type for XXPH128() : currently, it's a single 64-bit value, like the 64-bit variant.
- *                          It could be argued that it's more logical to offer a 128-bit seed input parameter for a 128-bit hash.
- *                          But 128-bit seed is more difficult to use, since it requires to pass a structure instead of a scalar value.
- *                          Such a variant could either replace current one, or become an additional one.
- *                          Farmhash, for example, offers both variants (the 128-bits seed variant is called `doubleSeed`).
- *                          Follow up question : if both 64-bit and 128-bit seeds are allowed, which variant should be called XXPH128 ?
- *
- * - Result for len==0 :    Currently, the result of hashing a zero-length input is always `0`.
- *                          It seems okay as a return value when using "default" secret and seed.
- *                          But is it still fine to return `0` when secret or seed are non-default ?
- *                          Are there use cases which could depend on generating a different hash result for zero-length input when the secret is different ?
- *
- * - Consistency (1) :      Streaming XXPH128 uses an XXPH3 state, which is the same state as XXPH3_64bits().
- *                          It means a 128bit streaming loop must invoke the following symbols :
- *                          XXPH3_createState(), XXPH3_128bits_reset(), XXPH3_128bits_update() (loop), XXPH3_128bits_digest(), XXPH3_freeState().
- *                          Is that consistent enough ?
- *
- * - Consistency (2) :      The canonical representation of `XXPH3_64bits` is provided by existing functions
- *                          XXPH64_canonicalFromHash(), and reverse operation XXPH64_hashFromCanonical().
- *                          As a mirror, canonical functions for XXPH128_hash_t results generated by `XXPH3_128bits`
- *                          are XXPH128_canonicalFromHash() and XXPH128_hashFromCanonical().
- *                          Which means, `XXPH3` doesn't appear in the names, because canonical functions operate on a type,
- *                          independently of which algorithm was used to generate that type.
- *                          Is that consistent enough ?
- */
-
-#ifdef XXPH_NAMESPACE
-#  define XXPH3_64bits XXPH_NAME2(XXPH_NAMESPACE, XXPH3_64bits)
-#  define XXPH3_64bits_withSecret XXPH_NAME2(XXPH_NAMESPACE, XXPH3_64bits_withSecret)
-#  define XXPH3_64bits_withSeed XXPH_NAME2(XXPH_NAMESPACE, XXPH3_64bits_withSeed)
-#endif
-
-/* XXPH3_64bits() :
- * default 64-bit variant, using default secret and default seed of 0.
- * It's the fastest variant. */
-XXPH_PUBLIC_API XXPH64_hash_t XXPH3_64bits(const void* data, size_t len);
-
-/* XXPH3_64bits_withSecret() :
- * It's possible to provide any blob of bytes as a "secret" to generate the hash.
- * This makes it more difficult for an external actor to prepare an intentional collision.
- * The secret *must* be large enough (>= XXPH3_SECRET_SIZE_MIN).
- * It should consist of random bytes.
- * Avoid repeating same character, or sequences of bytes,
- * and especially avoid swathes of \0.
- * Failure to respect these conditions will result in a poor quality hash.
- */
-#define XXPH3_SECRET_SIZE_MIN 136
-XXPH_PUBLIC_API XXPH64_hash_t XXPH3_64bits_withSecret(const void* data, size_t len, const void* secret, size_t secretSize);
-
-/* XXPH3_64bits_withSeed() :
- * This variant generates on the fly a custom secret,
- * based on the default secret, altered using the `seed` value.
- * While this operation is decently fast, note that it's not completely free.
- * note : seed==0 produces same results as XXPH3_64bits() */
-XXPH_PUBLIC_API XXPH64_hash_t XXPH3_64bits_withSeed(const void* data, size_t len, XXPH64_hash_t seed);
-
-#if defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 201112L)   /* C11+ */
-#  include <stdalign.h>
-#  define XXPH_ALIGN(n)      alignas(n)
-#elif defined(__GNUC__)
-#  define XXPH_ALIGN(n)      __attribute__ ((aligned(n)))
-#elif defined(_MSC_VER)
-#  define XXPH_ALIGN(n)      __declspec(align(n))
-#else
-#  define XXPH_ALIGN(n)   /* disabled */
-#endif
-
-#define XXPH3_SECRET_DEFAULT_SIZE 192   /* minimum XXPH3_SECRET_SIZE_MIN */
-
-#endif  /* XXPH_NO_LONG_LONG */
-
-
-/*-**********************************************************************
-*  XXPH_INLINE_ALL
-************************************************************************/
-#if defined(XXPH_INLINE_ALL) || defined(XXPH_PRIVATE_API)
-
-/* === RocksDB modification: was #include here but permanently inlining === */
-
-typedef struct {
-    XXPH64_hash_t low64;
-    XXPH64_hash_t high64;
-} XXPH128_hash_t;
-
-/* *************************************
-*  Tuning parameters
-***************************************/
-/*!XXPH_FORCE_MEMORY_ACCESS :
- * By default, access to unaligned memory is controlled by `memcpy()`, which is safe and portable.
- * Unfortunately, on some target/compiler combinations, the generated assembly is sub-optimal.
- * The below switch allow to select different access method for improved performance.
- * Method 0 (default) : use `memcpy()`. Safe and portable.
- * Method 1 : `__packed` statement. It depends on compiler extension (ie, not portable).
- *            This method is safe if your compiler supports it, and *generally* as fast or faster than `memcpy`.
- * Method 2 : direct access. This method doesn't depend on compiler but violate C standard.
- *            It can generate buggy code on targets which do not support unaligned memory accesses.
- *            But in some circumstances, it's the only known way to get the most performance (ie GCC + ARMv6)
- * See http://stackoverflow.com/a/32095106/646947 for details.
- * Prefer these methods in priority order (0 > 1 > 2)
- */
-#ifndef XXPH_FORCE_MEMORY_ACCESS   /* can be defined externally, on command line for example */
-#  if !defined(__clang__) && defined(__GNUC__) && defined(__ARM_FEATURE_UNALIGNED) && defined(__ARM_ARCH) && (__ARM_ARCH == 6)
-#    define XXPH_FORCE_MEMORY_ACCESS 2
-#  elif !defined(__clang__) && ((defined(__INTEL_COMPILER) && !defined(_WIN32)) || \
-  (defined(__GNUC__) && (defined(__ARM_ARCH) && __ARM_ARCH >= 7)))
-#    define XXPH_FORCE_MEMORY_ACCESS 1
-#  endif
-#endif
-
-/*!XXPH_ACCEPT_NULL_INPUT_POINTER :
- * If input pointer is NULL, xxHash default behavior is to dereference it, triggering a segfault.
- * When this macro is enabled, xxHash actively checks input for null pointer.
- * It it is, result for null input pointers is the same as a null-length input.
- */
-#ifndef XXPH_ACCEPT_NULL_INPUT_POINTER   /* can be defined externally */
-#  define XXPH_ACCEPT_NULL_INPUT_POINTER 0
-#endif
-
-/*!XXPH_FORCE_ALIGN_CHECK :
- * This is a minor performance trick, only useful with lots of very small keys.
- * It means : check for aligned/unaligned input.
- * The check costs one initial branch per hash;
- * set it to 0 when the input is guaranteed to be aligned,
- * or when alignment doesn't matter for performance.
- */
-#ifndef XXPH_FORCE_ALIGN_CHECK /* can be defined externally */
-#  if defined(__i386) || defined(_M_IX86) || defined(__x86_64__) || defined(_M_X64)
-#    define XXPH_FORCE_ALIGN_CHECK 0
-#  else
-#    define XXPH_FORCE_ALIGN_CHECK 1
-#  endif
-#endif
-
-/*!XXPH_REROLL:
- * Whether to reroll XXPH32_finalize, and XXPH64_finalize,
- * instead of using an unrolled jump table/if statement loop.
- *
- * This is automatically defined on -Os/-Oz on GCC and Clang. */
-#ifndef XXPH_REROLL
-#  if defined(__OPTIMIZE_SIZE__)
-#    define XXPH_REROLL 1
-#  else
-#    define XXPH_REROLL 0
-#  endif
-#endif
-
-#include <limits.h>   /* ULLONG_MAX */
-
-#ifndef XXPH_STATIC_LINKING_ONLY
-#define XXPH_STATIC_LINKING_ONLY
-#endif
-
-/* *************************************
-*  Compiler Specific Options
-***************************************/
-#ifdef _MSC_VER    /* Visual Studio */
-#  pragma warning(disable : 4127)      /* disable: C4127: conditional expression is constant */
-#  define XXPH_FORCE_INLINE static __forceinline
-#  define XXPH_NO_INLINE static __declspec(noinline)
-#else
-#  if defined (__cplusplus) || defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L   /* C99 */
-#    ifdef __GNUC__
-#      define XXPH_FORCE_INLINE static inline __attribute__((always_inline))
-#      define XXPH_NO_INLINE static __attribute__((noinline))
-#    else
-#      define XXPH_FORCE_INLINE static inline
-#      define XXPH_NO_INLINE static
-#    endif
-#  else
-#    define XXPH_FORCE_INLINE static
-#    define XXPH_NO_INLINE static
-#  endif /* __STDC_VERSION__ */
-#endif
-
-
-
-/* *************************************
-*  Debug
-***************************************/
-/* DEBUGLEVEL is expected to be defined externally,
- * typically through compiler command line.
- * Value must be a number. */
-#ifndef DEBUGLEVEL
-#  define DEBUGLEVEL 0
-#endif
-
-#if (DEBUGLEVEL>=1)
-#  include <assert.h>   /* note : can still be disabled with NDEBUG */
-#  define XXPH_ASSERT(c)   assert(c)
-#else
-#  define XXPH_ASSERT(c)   ((void)0)
-#endif
-
-/* note : use after variable declarations */
-#define XXPH_STATIC_ASSERT(c)  { enum { XXPH_sa = 1/(int)(!!(c)) }; }
-
-
-/* *************************************
-*  Basic Types
-***************************************/
-#if !defined (__VMS) \
- && (defined (__cplusplus) \
- || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */) )
-# include <stdint.h>
-  typedef uint8_t  xxh_u8;
-#else
-  typedef unsigned char      xxh_u8;
-#endif
-typedef XXPH32_hash_t xxh_u32;
-
-
-/* ===   Memory access   === */
-
-#if (defined(XXPH_FORCE_MEMORY_ACCESS) && (XXPH_FORCE_MEMORY_ACCESS==2))
-
-/* Force direct memory access. Only works on CPU which support unaligned memory access in hardware */
-static xxh_u32 XXPH_read32(const void* memPtr) { return *(const xxh_u32*) memPtr; }
-
-#elif (defined(XXPH_FORCE_MEMORY_ACCESS) && (XXPH_FORCE_MEMORY_ACCESS==1))
-
-/* __pack instructions are safer, but compiler specific, hence potentially problematic for some compilers */
-/* currently only defined for gcc and icc */
-typedef union { xxh_u32 u32; } __attribute__((packed)) unalign;
-static xxh_u32 XXPH_read32(const void* ptr) { return ((const unalign*)ptr)->u32; }
-
-#else
-
-/* portable and safe solution. Generally efficient.
- * see : http://stackoverflow.com/a/32095106/646947
- */
-static xxh_u32 XXPH_read32(const void* memPtr)
-{
-    xxh_u32 val;
-    memcpy(&val, memPtr, sizeof(val));
-    return val;
-}
-
-#endif   /* XXPH_FORCE_DIRECT_MEMORY_ACCESS */
-
-
-/* ===   Endianess   === */
-
-/* XXPH_CPU_LITTLE_ENDIAN can be defined externally, for example on the compiler command line */
-#ifndef XXPH_CPU_LITTLE_ENDIAN
-#  if defined(_WIN32) /* Windows is always little endian */ \
-     || defined(__LITTLE_ENDIAN__) \
-     || (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
-#    define XXPH_CPU_LITTLE_ENDIAN 1
-#  elif defined(__BIG_ENDIAN__) \
-     || (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
-#    define XXPH_CPU_LITTLE_ENDIAN 0
-#  else
-static int XXPH_isLittleEndian(void)
-{
-    const union { xxh_u32 u; xxh_u8 c[4]; } one = { 1 };   /* don't use static : performance detrimental  */
-    return one.c[0];
-}
-#   define XXPH_CPU_LITTLE_ENDIAN   XXPH_isLittleEndian()
-#  endif
-#endif
-
-
-
-
-/* ****************************************
-*  Compiler-specific Functions and Macros
-******************************************/
-#define XXPH_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
-
-#ifndef __has_builtin
-#  define __has_builtin(x) 0
-#endif
-
-#if !defined(NO_CLANG_BUILTIN) && __has_builtin(__builtin_rotateleft32) && __has_builtin(__builtin_rotateleft64)
-#  define XXPH_rotl32 __builtin_rotateleft32
-#  define XXPH_rotl64 __builtin_rotateleft64
-/* Note : although _rotl exists for minGW (GCC under windows), performance seems poor */
-#elif defined(_MSC_VER)
-#  define XXPH_rotl32(x,r) _rotl(x,r)
-#  define XXPH_rotl64(x,r) _rotl64(x,r)
-#else
-#  define XXPH_rotl32(x,r) (((x) << (r)) | ((x) >> (32 - (r))))
-#  define XXPH_rotl64(x,r) (((x) << (r)) | ((x) >> (64 - (r))))
-#endif
-
-#if defined(_MSC_VER)     /* Visual Studio */
-#  define XXPH_swap32 _byteswap_ulong
-#elif XXPH_GCC_VERSION >= 403
-#  define XXPH_swap32 __builtin_bswap32
-#else
-static xxh_u32 XXPH_swap32 (xxh_u32 x)
-{
-    return  ((x << 24) & 0xff000000 ) |
-            ((x <<  8) & 0x00ff0000 ) |
-            ((x >>  8) & 0x0000ff00 ) |
-            ((x >> 24) & 0x000000ff );
-}
-#endif
-
-
-/* ***************************
-*  Memory reads
-*****************************/
-typedef enum { XXPH_aligned, XXPH_unaligned } XXPH_alignment;
-
-XXPH_FORCE_INLINE xxh_u32 XXPH_readLE32(const void* ptr)
-{
-    return XXPH_CPU_LITTLE_ENDIAN ? XXPH_read32(ptr) : XXPH_swap32(XXPH_read32(ptr));
-}
-
-XXPH_FORCE_INLINE xxh_u32
-XXPH_readLE32_align(const void* ptr, XXPH_alignment align)
-{
-    if (align==XXPH_unaligned) {
-        return XXPH_readLE32(ptr);
-    } else {
-        return XXPH_CPU_LITTLE_ENDIAN ? *(const xxh_u32*)ptr : XXPH_swap32(*(const xxh_u32*)ptr);
-    }
-}
-
-
-/* *************************************
-*  Misc
-***************************************/
-XXPH_PUBLIC_API unsigned XXPH_versionNumber (void) { return XXPH_VERSION_NUMBER; }
-
-
-static const xxh_u32 PRIME32_1 = 0x9E3779B1U;   /* 0b10011110001101110111100110110001 */
-static const xxh_u32 PRIME32_2 = 0x85EBCA77U;   /* 0b10000101111010111100101001110111 */
-static const xxh_u32 PRIME32_3 = 0xC2B2AE3DU;   /* 0b11000010101100101010111000111101 */
-static const xxh_u32 PRIME32_4 = 0x27D4EB2FU;   /* 0b00100111110101001110101100101111 */
-static const xxh_u32 PRIME32_5 = 0x165667B1U;   /* 0b00010110010101100110011110110001 */
-
-#ifndef XXPH_NO_LONG_LONG
-
-/* *******************************************************************
-*  64-bit hash functions
-*********************************************************************/
-
-/*======   Memory access   ======*/
-
-typedef XXPH64_hash_t xxh_u64;
-
-#if (defined(XXPH_FORCE_MEMORY_ACCESS) && (XXPH_FORCE_MEMORY_ACCESS==2))
-
-/* Force direct memory access. Only works on CPU which support unaligned memory access in hardware */
-static xxh_u64 XXPH_read64(const void* memPtr) { return *(const xxh_u64*) memPtr; }
-
-#elif (defined(XXPH_FORCE_MEMORY_ACCESS) && (XXPH_FORCE_MEMORY_ACCESS==1))
-
-/* __pack instructions are safer, but compiler specific, hence potentially problematic for some compilers */
-/* currently only defined for gcc and icc */
-typedef union { xxh_u32 u32; xxh_u64 u64; } __attribute__((packed)) unalign64;
-static xxh_u64 XXPH_read64(const void* ptr) { return ((const unalign64*)ptr)->u64; }
-
-#else
-
-/* portable and safe solution. Generally efficient.
- * see : http://stackoverflow.com/a/32095106/646947
- */
-
-static xxh_u64 XXPH_read64(const void* memPtr)
-{
-    xxh_u64 val;
-    memcpy(&val, memPtr, sizeof(val));
-    return val;
-}
-
-#endif   /* XXPH_FORCE_DIRECT_MEMORY_ACCESS */
-
-#if defined(_MSC_VER)     /* Visual Studio */
-#  define XXPH_swap64 _byteswap_uint64
-#elif XXPH_GCC_VERSION >= 403
-#  define XXPH_swap64 __builtin_bswap64
-#else
-static xxh_u64 XXPH_swap64 (xxh_u64 x)
-{
-    return  ((x << 56) & 0xff00000000000000ULL) |
-            ((x << 40) & 0x00ff000000000000ULL) |
-            ((x << 24) & 0x0000ff0000000000ULL) |
-            ((x << 8)  & 0x000000ff00000000ULL) |
-            ((x >> 8)  & 0x00000000ff000000ULL) |
-            ((x >> 24) & 0x0000000000ff0000ULL) |
-            ((x >> 40) & 0x000000000000ff00ULL) |
-            ((x >> 56) & 0x00000000000000ffULL);
-}
-#endif
-
-XXPH_FORCE_INLINE xxh_u64 XXPH_readLE64(const void* ptr)
-{
-    return XXPH_CPU_LITTLE_ENDIAN ? XXPH_read64(ptr) : XXPH_swap64(XXPH_read64(ptr));
-}
-
-XXPH_FORCE_INLINE xxh_u64
-XXPH_readLE64_align(const void* ptr, XXPH_alignment align)
-{
-    if (align==XXPH_unaligned)
-        return XXPH_readLE64(ptr);
-    else
-        return XXPH_CPU_LITTLE_ENDIAN ? *(const xxh_u64*)ptr : XXPH_swap64(*(const xxh_u64*)ptr);
-}
-
-
-/*======   xxh64   ======*/
-
-static const xxh_u64 PRIME64_1 = 0x9E3779B185EBCA87ULL;   /* 0b1001111000110111011110011011000110000101111010111100101010000111 */
-static const xxh_u64 PRIME64_2 = 0xC2B2AE3D27D4EB4FULL;   /* 0b1100001010110010101011100011110100100111110101001110101101001111 */
-static const xxh_u64 PRIME64_3 = 0x165667B19E3779F9ULL;   /* 0b0001011001010110011001111011000110011110001101110111100111111001 */
-static const xxh_u64 PRIME64_4 = 0x85EBCA77C2B2AE63ULL;   /* 0b1000010111101011110010100111011111000010101100101010111001100011 */
-static const xxh_u64 PRIME64_5 = 0x27D4EB2F165667C5ULL;   /* 0b0010011111010100111010110010111100010110010101100110011111000101 */
-
-
-/* *********************************************************************
-*  XXPH3
-*  New generation hash designed for speed on small keys and vectorization
-************************************************************************ */
-
-/*======== Was #include "xxh3.h", now inlined below ==========*/
-
-/*
-   xxHash - Extremely Fast Hash algorithm
-   Development source file for `xxh3`
-   Copyright (C) 2019-present, Yann Collet.
-
-   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-       * Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-       * Redistributions in binary form must reproduce the above
-   copyright notice, this list of conditions and the following disclaimer
-   in the documentation and/or other materials provided with the
-   distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-   You can contact the author at :
-   - xxHash source repository : https://github.com/Cyan4973/xxHash
-*/
-
-/* RocksDB Note: This file contains a preview release (xxhash repository
-   version 0.7.2) of XXPH3 that is unlikely to be compatible with the final
-   version of XXPH3. We have therefore renamed this XXPH3 ("preview"), for
-   clarity so that we can continue to use this version even after
-   integrating a newer incompatible version.
-*/
-
-/* ===   Dependencies   === */
-
-#undef XXPH_INLINE_ALL   /* in case it's already defined */
-#define XXPH_INLINE_ALL
-
-
-/* ===   Compiler specifics   === */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L   /* >= C99 */
-#  define XXPH_RESTRICT   restrict
-#else
-/* note : it might be useful to define __restrict or __restrict__ for some C++ compilers */
-#  define XXPH_RESTRICT   /* disable */
-#endif
-
-#if defined(__GNUC__)
-#  if defined(__AVX2__)
-#    include <immintrin.h>
-#  elif defined(__SSE2__)
-#    include <emmintrin.h>
-#  elif defined(__ARM_NEON__) || defined(__ARM_NEON)
-#    define inline __inline__  /* clang bug */
-#    include <arm_neon.h>
-#    undef inline
-#  endif
-#elif defined(_MSC_VER)
-#  include <intrin.h>
-#endif
-
-/*
- * Sanity check.
- *
- * XXPH3 only requires these features to be efficient:
- *
- *  - Usable unaligned access
- *  - A 32-bit or 64-bit ALU
- *      - If 32-bit, a decent ADC instruction
- *  - A 32 or 64-bit multiply with a 64-bit result
- *
- * Almost all 32-bit and 64-bit targets meet this, except for Thumb-1, the
- * classic 16-bit only subset of ARM's instruction set.
- *
- * First of all, Thumb-1 lacks support for the UMULL instruction which
- * performs the important long multiply. This means numerous __aeabi_lmul
- * calls.
- *
- * Second of all, the 8 functional registers are just not enough.
- * Setup for __aeabi_lmul, byteshift loads, pointers, and all arithmetic need
- * Lo registers, and this shuffling results in thousands more MOVs than A32.
- *
- * A32 and T32 don't have this limitation. They can access all 14 registers,
- * do a 32->64 multiply with UMULL, and the flexible operand is helpful too.
- *
- * If compiling Thumb-1 for a target which supports ARM instructions, we
- * will give a warning.
- *
- * Usually, if this happens, it is because of an accident and you probably
- * need to specify -march, as you probably meant to compileh for a newer
- * architecture.
- */
-#if defined(__thumb__) && !defined(__thumb2__) && defined(__ARM_ARCH_ISA_ARM)
-#   warning "XXPH3 is highly inefficient without ARM or Thumb-2."
-#endif
-
-/* ==========================================
- * Vectorization detection
- * ========================================== */
-#define XXPH_SCALAR 0
-#define XXPH_SSE2   1
-#define XXPH_AVX2   2
-#define XXPH_NEON   3
-#define XXPH_VSX    4
-
-#ifndef XXPH_VECTOR    /* can be defined on command line */
-#  if defined(__AVX2__)
-#    define XXPH_VECTOR XXPH_AVX2
-#  elif defined(__SSE2__) || defined(_M_AMD64) || defined(_M_X64) || (defined(_M_IX86_FP) && (_M_IX86_FP == 2))
-#    define XXPH_VECTOR XXPH_SSE2
-#  elif defined(__GNUC__) /* msvc support maybe later */ \
-  && (defined(__ARM_NEON__) || defined(__ARM_NEON)) \
-  && (defined(__LITTLE_ENDIAN__) /* We only support little endian NEON */ \
-    || (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
-#    define XXPH_VECTOR XXPH_NEON
-#  elif defined(__PPC64__) && defined(__POWER8_VECTOR__) && defined(__GNUC__)
-#    define XXPH_VECTOR XXPH_VSX
-#  else
-#    define XXPH_VECTOR XXPH_SCALAR
-#  endif
-#endif
-
-/* control alignment of accumulator,
- * for compatibility with fast vector loads */
-#ifndef XXPH_ACC_ALIGN
-#  if XXPH_VECTOR == 0   /* scalar */
-#     define XXPH_ACC_ALIGN 8
-#  elif XXPH_VECTOR == 1  /* sse2 */
-#     define XXPH_ACC_ALIGN 16
-#  elif XXPH_VECTOR == 2  /* avx2 */
-#     define XXPH_ACC_ALIGN 32
-#  elif XXPH_VECTOR == 3  /* neon */
-#     define XXPH_ACC_ALIGN 16
-#  elif XXPH_VECTOR == 4  /* vsx */
-#     define XXPH_ACC_ALIGN 16
-#  endif
-#endif
-
-/* xxh_u64 XXPH_mult32to64(xxh_u32 a, xxh_u64 b) { return (xxh_u64)a * (xxh_u64)b; } */
-#if defined(_MSC_VER) && defined(_M_IX86)
-#    include <intrin.h>
-#    define XXPH_mult32to64(x, y) __emulu(x, y)
-#else
-#    define XXPH_mult32to64(x, y) ((xxh_u64)((x) & 0xFFFFFFFF) * (xxh_u64)((y) & 0xFFFFFFFF))
-#endif
-
-/* VSX stuff. It's a lot because VSX support is mediocre across compilers and
- * there is a lot of mischief with endianness. */
-#if XXPH_VECTOR == XXPH_VSX
-#  include <altivec.h>
-#  undef vector
-typedef __vector unsigned long long U64x2;
-typedef __vector unsigned char U8x16;
-typedef __vector unsigned U32x4;
-
-#ifndef XXPH_VSX_BE
-#  if defined(__BIG_ENDIAN__) \
-  || (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
-#    define XXPH_VSX_BE 1
-#  elif defined(__VEC_ELEMENT_REG_ORDER__) && __VEC_ELEMENT_REG_ORDER__ == __ORDER_BIG_ENDIAN__
-#    warning "-maltivec=be is not recommended. Please use native endianness."
-#    define XXPH_VSX_BE 1
-#  else
-#    define XXPH_VSX_BE 0
-#  endif
-#endif
-
-/* We need some helpers for big endian mode. */
-#if XXPH_VSX_BE
-/* A wrapper for POWER9's vec_revb. */
-#  ifdef __POWER9_VECTOR__
-#    define XXPH_vec_revb vec_revb
-#  else
-XXPH_FORCE_INLINE U64x2 XXPH_vec_revb(U64x2 val)
-{
-    U8x16 const vByteSwap = { 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00,
-                              0x0F, 0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08 };
-    return vec_perm(val, val, vByteSwap);
-}
-#  endif
-
-/* Power8 Crypto gives us vpermxor which is very handy for
- * PPC64EB.
- *
- * U8x16 vpermxor(U8x16 a, U8x16 b, U8x16 mask)
- * {
- *     U8x16 ret;
- *     for (int i = 0; i < 16; i++) {
- *         ret[i] = a[mask[i] & 0xF] ^ b[mask[i] >> 4];
- *     }
- *     return ret;
- * }
- *
- * Because both of the main loops load the key, swap, and xor it with input,
- * we can combine the key swap into this instruction.
- */
-#  ifdef vec_permxor
-#    define XXPH_vec_permxor vec_permxor
-#  else
-#    define XXPH_vec_permxor __builtin_crypto_vpermxor
-#  endif
-#endif  /* XXPH_VSX_BE */
-/*
- * Because we reinterpret the multiply, there are endian memes: vec_mulo actually becomes
- * vec_mule.
- *
- * Additionally, the intrinsic wasn't added until GCC 8, despite existing for a while.
- * Clang has an easy way to control this, we can just use the builtin which doesn't swap.
- * GCC needs inline assembly. */
-#if __has_builtin(__builtin_altivec_vmuleuw)
-#  define XXPH_vec_mulo __builtin_altivec_vmulouw
-#  define XXPH_vec_mule __builtin_altivec_vmuleuw
-#else
-/* Adapted from https://github.com/google/highwayhash/blob/master/highwayhash/hh_vsx.h. */
-XXPH_FORCE_INLINE U64x2 XXPH_vec_mulo(U32x4 a, U32x4 b) {
-    U64x2 result;
-    __asm__("vmulouw %0, %1, %2" : "=v" (result) : "v" (a), "v" (b));
-    return result;
-}
-XXPH_FORCE_INLINE U64x2 XXPH_vec_mule(U32x4 a, U32x4 b) {
-    U64x2 result;
-    __asm__("vmuleuw %0, %1, %2" : "=v" (result) : "v" (a), "v" (b));
-    return result;
-}
-#endif /* __has_builtin(__builtin_altivec_vmuleuw) */
-#endif /* XXPH_VECTOR == XXPH_VSX */
-
-/* prefetch
- * can be disabled, by declaring XXPH_NO_PREFETCH build macro */
-#if defined(XXPH_NO_PREFETCH)
-#  define XXPH_PREFETCH(ptr)  (void)(ptr)  /* disabled */
-#else
-#if defined(_MSC_VER) && \
-    (defined(_M_X64) ||  \
-     defined(_M_IX86)) /* _mm_prefetch() is not defined outside of x86/x64 */
-#    include <mmintrin.h>   /* https://msdn.microsoft.com/fr-fr/library/84szxsww(v=vs.90).aspx */
-#    define XXPH_PREFETCH(ptr)  _mm_prefetch((const char*)(ptr), _MM_HINT_T0)
-#  elif defined(__GNUC__) && ( (__GNUC__ >= 4) || ( (__GNUC__ == 3) && (__GNUC_MINOR__ >= 1) ) )
-#    define XXPH_PREFETCH(ptr)  __builtin_prefetch((ptr), 0 /* rw==read */, 3 /* locality */)
-#  else
-#    define XXPH_PREFETCH(ptr) (void)(ptr)  /* disabled */
-#  endif
-#endif  /* XXPH_NO_PREFETCH */
-
-
-/* ==========================================
- * XXPH3 default settings
- * ========================================== */
-
-#define XXPH_SECRET_DEFAULT_SIZE 192   /* minimum XXPH3_SECRET_SIZE_MIN */
-
-#if (XXPH_SECRET_DEFAULT_SIZE < XXPH3_SECRET_SIZE_MIN)
-#  error "default keyset is not large enough"
-#endif
-
-XXPH_ALIGN(64) static const xxh_u8 kSecret[XXPH_SECRET_DEFAULT_SIZE] = {
-    0xb8, 0xfe, 0x6c, 0x39, 0x23, 0xa4, 0x4b, 0xbe, 0x7c, 0x01, 0x81, 0x2c, 0xf7, 0x21, 0xad, 0x1c,
-    0xde, 0xd4, 0x6d, 0xe9, 0x83, 0x90, 0x97, 0xdb, 0x72, 0x40, 0xa4, 0xa4, 0xb7, 0xb3, 0x67, 0x1f,
-    0xcb, 0x79, 0xe6, 0x4e, 0xcc, 0xc0, 0xe5, 0x78, 0x82, 0x5a, 0xd0, 0x7d, 0xcc, 0xff, 0x72, 0x21,
-    0xb8, 0x08, 0x46, 0x74, 0xf7, 0x43, 0x24, 0x8e, 0xe0, 0x35, 0x90, 0xe6, 0x81, 0x3a, 0x26, 0x4c,
-    0x3c, 0x28, 0x52, 0xbb, 0x91, 0xc3, 0x00, 0xcb, 0x88, 0xd0, 0x65, 0x8b, 0x1b, 0x53, 0x2e, 0xa3,
-    0x71, 0x64, 0x48, 0x97, 0xa2, 0x0d, 0xf9, 0x4e, 0x38, 0x19, 0xef, 0x46, 0xa9, 0xde, 0xac, 0xd8,
-    0xa8, 0xfa, 0x76, 0x3f, 0xe3, 0x9c, 0x34, 0x3f, 0xf9, 0xdc, 0xbb, 0xc7, 0xc7, 0x0b, 0x4f, 0x1d,
-    0x8a, 0x51, 0xe0, 0x4b, 0xcd, 0xb4, 0x59, 0x31, 0xc8, 0x9f, 0x7e, 0xc9, 0xd9, 0x78, 0x73, 0x64,
-
-    0xea, 0xc5, 0xac, 0x83, 0x34, 0xd3, 0xeb, 0xc3, 0xc5, 0x81, 0xa0, 0xff, 0xfa, 0x13, 0x63, 0xeb,
-    0x17, 0x0d, 0xdd, 0x51, 0xb7, 0xf0, 0xda, 0x49, 0xd3, 0x16, 0x55, 0x26, 0x29, 0xd4, 0x68, 0x9e,
-    0x2b, 0x16, 0xbe, 0x58, 0x7d, 0x47, 0xa1, 0xfc, 0x8f, 0xf8, 0xb8, 0xd1, 0x7a, 0xd0, 0x31, 0xce,
-    0x45, 0xcb, 0x3a, 0x8f, 0x95, 0x16, 0x04, 0x28, 0xaf, 0xd7, 0xfb, 0xca, 0xbb, 0x4b, 0x40, 0x7e,
-};
-
-/*
- * GCC for x86 has a tendency to use SSE in this loop. While it
- * successfully avoids swapping (as MUL overwrites EAX and EDX), it
- * slows it down because instead of free register swap shifts, it
- * must use pshufd and punpckl/hd.
- *
- * To prevent this, we use this attribute to shut off SSE.
- */
-#if defined(__GNUC__) && !defined(__clang__) && defined(__i386__)
-__attribute__((__target__("no-sse")))
-#endif
-static XXPH128_hash_t
-XXPH_mult64to128(xxh_u64 lhs, xxh_u64 rhs)
-{
-    /*
-     * GCC/Clang __uint128_t method.
-     *
-     * On most 64-bit targets, GCC and Clang define a __uint128_t type.
-     * This is usually the best way as it usually uses a native long 64-bit
-     * multiply, such as MULQ on x86_64 or MUL + UMULH on aarch64.
-     *
-     * Usually.
-     *
-     * Despite being a 32-bit platform, Clang (and emscripten) define this
-     * type despite not having the arithmetic for it. This results in a
-     * laggy compiler builtin call which calculates a full 128-bit multiply.
-     * In that case it is best to use the portable one.
-     * https://github.com/Cyan4973/xxHash/issues/211#issuecomment-515575677
-     */
-#if defined(__GNUC__) && !defined(__wasm__) \
-    && defined(__SIZEOF_INT128__) \
-    || (defined(_INTEGRAL_MAX_BITS) && _INTEGRAL_MAX_BITS >= 128)
-
-    __uint128_t product = (__uint128_t)lhs * (__uint128_t)rhs;
-    XXPH128_hash_t const r128 = { (xxh_u64)(product), (xxh_u64)(product >> 64) };
-    return r128;
-
-    /*
-     * MSVC for x64's _umul128 method.
-     *
-     * xxh_u64 _umul128(xxh_u64 Multiplier, xxh_u64 Multiplicand, xxh_u64 *HighProduct);
-     *
-     * This compiles to single operand MUL on x64.
-     */
-#elif defined(_M_X64) || defined(_M_IA64)
-
-#ifndef _MSC_VER
-#   pragma intrinsic(_umul128)
-#endif
-    xxh_u64 product_high;
-    xxh_u64 const product_low = _umul128(lhs, rhs, &product_high);
-    XXPH128_hash_t const r128 = { product_low, product_high };
-    return r128;
-
-#else
-    /*
-     * Portable scalar method. Optimized for 32-bit and 64-bit ALUs.
-     *
-     * This is a fast and simple grade school multiply, which is shown
-     * below with base 10 arithmetic instead of base 0x100000000.
-     *
-     *           9 3 // D2 lhs = 93
-     *         x 7 5 // D2 rhs = 75
-     *     ----------
-     *           1 5 // D2 lo_lo = (93 % 10) * (75 % 10)
-     *         4 5 | // D2 hi_lo = (93 / 10) * (75 % 10)
-     *         2 1 | // D2 lo_hi = (93 % 10) * (75 / 10)
-     *     + 6 3 | | // D2 hi_hi = (93 / 10) * (75 / 10)
-     *     ---------
-     *         2 7 | // D2 cross  = (15 / 10) + (45 % 10) + 21
-     *     + 6 7 | | // D2 upper  = (27 / 10) + (45 / 10) + 63
-     *     ---------
-     *       6 9 7 5
-     *
-     * The reasons for adding the products like this are:
-     *  1. It avoids manual carry tracking. Just like how
-     *     (9 * 9) + 9 + 9 = 99, the same applies with this for
-     *     UINT64_MAX. This avoids a lot of complexity.
-     *
-     *  2. It hints for, and on Clang, compiles to, the powerful UMAAL
-     *     instruction available in ARMv6+ A32/T32, which is shown below:
-     *
-     *         void UMAAL(xxh_u32 *RdLo, xxh_u32 *RdHi, xxh_u32 Rn, xxh_u32 Rm)
-     *         {
-     *             xxh_u64 product = (xxh_u64)*RdLo * (xxh_u64)*RdHi + Rn + Rm;
-     *             *RdLo = (xxh_u32)(product & 0xFFFFFFFF);
-     *             *RdHi = (xxh_u32)(product >> 32);
-     *         }
-     *
-     *     This instruction was designed for efficient long multiplication,
-     *     and allows this to be calculated in only 4 instructions which
-     *     is comparable to some 64-bit ALUs.
-     *
-     *  3. It isn't terrible on other platforms. Usually this will be
-     *     a couple of 32-bit ADD/ADCs.
-     */
-
-    /* First calculate all of the cross products. */
-    xxh_u64 const lo_lo = XXPH_mult32to64(lhs & 0xFFFFFFFF, rhs & 0xFFFFFFFF);
-    xxh_u64 const hi_lo = XXPH_mult32to64(lhs >> 32,        rhs & 0xFFFFFFFF);
-    xxh_u64 const lo_hi = XXPH_mult32to64(lhs & 0xFFFFFFFF, rhs >> 32);
-    xxh_u64 const hi_hi = XXPH_mult32to64(lhs >> 32,        rhs >> 32);
-
-    /* Now add the products together. These will never overflow. */
-    xxh_u64 const cross = (lo_lo >> 32) + (hi_lo & 0xFFFFFFFF) + lo_hi;
-    xxh_u64 const upper = (hi_lo >> 32) + (cross >> 32)        + hi_hi;
-    xxh_u64 const lower = (cross << 32) | (lo_lo & 0xFFFFFFFF);
-
-    XXPH128_hash_t r128 = { lower, upper };
-    return r128;
-#endif
-}
-
-/*
- * We want to keep the attribute here because a target switch
- * disables inlining.
- *
- * Does a 64-bit to 128-bit multiply, then XOR folds it.
- * The reason for the separate function is to prevent passing
- * too many structs around by value. This will hopefully inline
- * the multiply, but we don't force it.
- */
-#if defined(__GNUC__) && !defined(__clang__) && defined(__i386__)
-__attribute__((__target__("no-sse")))
-#endif
-static xxh_u64
-XXPH3_mul128_fold64(xxh_u64 lhs, xxh_u64 rhs)
-{
-    XXPH128_hash_t product = XXPH_mult64to128(lhs, rhs);
-    return product.low64 ^ product.high64;
-}
-
-
-static XXPH64_hash_t XXPH3_avalanche(xxh_u64 h64)
-{
-    h64 ^= h64 >> 37;
-    h64 *= PRIME64_3;
-    h64 ^= h64 >> 32;
-    return h64;
-}
-
-
-/* ==========================================
- * Short keys
- * ========================================== */
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_len_1to3_64b(const xxh_u8* input, size_t len, const xxh_u8* secret, XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(input != NULL);
-    XXPH_ASSERT(1 <= len && len <= 3);
-    XXPH_ASSERT(secret != NULL);
-    {   xxh_u8 const c1 = input[0];
-        xxh_u8 const c2 = input[len >> 1];
-        xxh_u8 const c3 = input[len - 1];
-        xxh_u32  const combined = ((xxh_u32)c1) | (((xxh_u32)c2) << 8) | (((xxh_u32)c3) << 16) | (((xxh_u32)len) << 24);
-        xxh_u64  const keyed = (xxh_u64)combined ^ (XXPH_readLE32(secret) + seed);
-        xxh_u64  const mixed = keyed * PRIME64_1;
-        return XXPH3_avalanche(mixed);
-    }
-}
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_len_4to8_64b(const xxh_u8* input, size_t len, const xxh_u8* secret, XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(input != NULL);
-    XXPH_ASSERT(secret != NULL);
-    XXPH_ASSERT(4 <= len && len <= 8);
-    {   xxh_u32 const input_lo = XXPH_readLE32(input);
-        xxh_u32 const input_hi = XXPH_readLE32(input + len - 4);
-        xxh_u64 const input_64 = input_lo | ((xxh_u64)input_hi << 32);
-        xxh_u64 const keyed = input_64 ^ (XXPH_readLE64(secret) + seed);
-        xxh_u64 const mix64 = len + ((keyed ^ (keyed >> 51)) * PRIME32_1);
-        return XXPH3_avalanche((mix64 ^ (mix64 >> 47)) * PRIME64_2);
-    }
-}
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_len_9to16_64b(const xxh_u8* input, size_t len, const xxh_u8* secret, XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(input != NULL);
-    XXPH_ASSERT(secret != NULL);
-    XXPH_ASSERT(9 <= len && len <= 16);
-    {   xxh_u64 const input_lo = XXPH_readLE64(input)           ^ (XXPH_readLE64(secret)     + seed);
-        xxh_u64 const input_hi = XXPH_readLE64(input + len - 8) ^ (XXPH_readLE64(secret + 8) - seed);
-        xxh_u64 const acc = len + (input_lo + input_hi) + XXPH3_mul128_fold64(input_lo, input_hi);
-        return XXPH3_avalanche(acc);
-    }
-}
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_len_0to16_64b(const xxh_u8* input, size_t len, const xxh_u8* secret, XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(len <= 16);
-    {   if (len > 8) return XXPH3_len_9to16_64b(input, len, secret, seed);
-        if (len >= 4) return XXPH3_len_4to8_64b(input, len, secret, seed);
-        if (len) return XXPH3_len_1to3_64b(input, len, secret, seed);
-        /*
-         * RocksDB modification from XXPH3 preview: zero result for empty
-         * string can be problematic for multiplication-based algorithms.
-         * Return a hash of the seed instead.
-         */
-        return XXPH3_mul128_fold64(seed + XXPH_readLE64(secret), PRIME64_2);
-    }
-}
-
-
-/* ===    Long Keys    === */
-
-#define STRIPE_LEN 64
-#define XXPH_SECRET_CONSUME_RATE 8   /* nb of secret bytes consumed at each accumulation */
-#define ACC_NB (STRIPE_LEN / sizeof(xxh_u64))
-
-typedef enum { XXPH3_acc_64bits, XXPH3_acc_128bits } XXPH3_accWidth_e;
-
-XXPH_FORCE_INLINE void
-XXPH3_accumulate_512(      void* XXPH_RESTRICT acc,
-                    const void* XXPH_RESTRICT input,
-                    const void* XXPH_RESTRICT secret,
-                    XXPH3_accWidth_e accWidth)
-{
-#if (XXPH_VECTOR == XXPH_AVX2)
-
-    XXPH_ASSERT((((size_t)acc) & 31) == 0);
-    {   XXPH_ALIGN(32) __m256i* const xacc  =       (__m256i *) acc;
-        const         __m256i* const xinput = (const __m256i *) input;  /* not really aligned, just for ptr arithmetic, and because _mm256_loadu_si256() requires this type */
-        const         __m256i* const xsecret = (const __m256i *) secret;   /* not really aligned, just for ptr arithmetic, and because _mm256_loadu_si256() requires this type */
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN/sizeof(__m256i); i++) {
-            __m256i const data_vec = _mm256_loadu_si256 (xinput+i);
-            __m256i const key_vec = _mm256_loadu_si256 (xsecret+i);
-            __m256i const data_key = _mm256_xor_si256 (data_vec, key_vec);                                  /* uint32 dk[8]  = {d0+k0, d1+k1, d2+k2, d3+k3, ...} */
-            __m256i const product = _mm256_mul_epu32 (data_key, _mm256_shuffle_epi32 (data_key, 0x31));  /* uint64 mul[4] = {dk0*dk1, dk2*dk3, ...} */
-            if (accWidth == XXPH3_acc_128bits) {
-                __m256i const data_swap = _mm256_shuffle_epi32(data_vec, _MM_SHUFFLE(1,0,3,2));
-                __m256i const sum = _mm256_add_epi64(xacc[i], data_swap);
-                xacc[i]  = _mm256_add_epi64(product, sum);
-            } else {  /* XXPH3_acc_64bits */
-                __m256i const sum = _mm256_add_epi64(xacc[i], data_vec);
-                xacc[i]  = _mm256_add_epi64(product, sum);
-            }
-    }   }
-
-#elif (XXPH_VECTOR == XXPH_SSE2)
-
-    XXPH_ASSERT((((size_t)acc) & 15) == 0);
-    {   XXPH_ALIGN(16) __m128i* const xacc  =       (__m128i *) acc;
-        const         __m128i* const xinput = (const __m128i *) input;  /* not really aligned, just for ptr arithmetic, and because _mm_loadu_si128() requires this type */
-        const         __m128i* const xsecret = (const __m128i *) secret;   /* not really aligned, just for ptr arithmetic, and because _mm_loadu_si128() requires this type */
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN/sizeof(__m128i); i++) {
-            __m128i const data_vec = _mm_loadu_si128 (xinput+i);
-            __m128i const key_vec = _mm_loadu_si128 (xsecret+i);
-            __m128i const data_key = _mm_xor_si128 (data_vec, key_vec);                                  /* uint32 dk[8]  = {d0+k0, d1+k1, d2+k2, d3+k3, ...} */
-            __m128i const product = _mm_mul_epu32 (data_key, _mm_shuffle_epi32 (data_key, 0x31));  /* uint64 mul[4] = {dk0*dk1, dk2*dk3, ...} */
-            if (accWidth == XXPH3_acc_128bits) {
-                __m128i const data_swap = _mm_shuffle_epi32(data_vec, _MM_SHUFFLE(1,0,3,2));
-                __m128i const sum = _mm_add_epi64(xacc[i], data_swap);
-                xacc[i]  = _mm_add_epi64(product, sum);
-            } else {  /* XXPH3_acc_64bits */
-                __m128i const sum = _mm_add_epi64(xacc[i], data_vec);
-                xacc[i]  = _mm_add_epi64(product, sum);
-            }
-    }   }
-
-#elif (XXPH_VECTOR == XXPH_NEON)
-
-    XXPH_ASSERT((((size_t)acc) & 15) == 0);
-    {
-        XXPH_ALIGN(16) uint64x2_t* const xacc = (uint64x2_t *) acc;
-        /* We don't use a uint32x4_t pointer because it causes bus errors on ARMv7. */
-        uint8_t const* const xinput = (const uint8_t *) input;
-        uint8_t const* const xsecret  = (const uint8_t *) secret;
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN / sizeof(uint64x2_t); i++) {
-#if !defined(__aarch64__) && !defined(__arm64__) && defined(__GNUC__) /* ARM32-specific hack */
-            /* vzip on ARMv7 Clang generates a lot of vmovs (technically vorrs) without this.
-             * vzip on 32-bit ARM NEON will overwrite the original register, and I think that Clang
-             * assumes I don't want to destroy it and tries to make a copy. This slows down the code
-             * a lot.
-             * aarch64 not only uses an entirely different syntax, but it requires three
-             * instructions...
-             *    ext    v1.16B, v0.16B, #8    // select high bits because aarch64 can't address them directly
-             *    zip1   v3.2s, v0.2s, v1.2s   // first zip
-             *    zip2   v2.2s, v0.2s, v1.2s   // second zip
-             * ...to do what ARM does in one:
-             *    vzip.32 d0, d1               // Interleave high and low bits and overwrite. */
-
-            /* data_vec = xsecret[i]; */
-            uint8x16_t const data_vec    = vld1q_u8(xinput + (i * 16));
-            /* key_vec  = xsecret[i];  */
-            uint8x16_t const key_vec     = vld1q_u8(xsecret  + (i * 16));
-            /* data_key = data_vec ^ key_vec; */
-            uint32x4_t       data_key;
-
-            if (accWidth == XXPH3_acc_64bits) {
-                /* Add first to prevent register swaps */
-                /* xacc[i] += data_vec; */
-                xacc[i] = vaddq_u64 (xacc[i], vreinterpretq_u64_u8(data_vec));
-            } else {  /* XXPH3_acc_128bits */
-                /* xacc[i] += swap(data_vec); */
-                /* can probably be optimized better */
-                uint64x2_t const data64 = vreinterpretq_u64_u8(data_vec);
-                uint64x2_t const swapped= vextq_u64(data64, data64, 1);
-                xacc[i] = vaddq_u64 (xacc[i], swapped);
-            }
-
-            data_key = vreinterpretq_u32_u8(veorq_u8(data_vec, key_vec));
-
-            /* Here's the magic. We use the quirkiness of vzip to shuffle data_key in place.
-             * shuffle: data_key[0, 1, 2, 3] = data_key[0, 2, 1, 3] */
-            __asm__("vzip.32 %e0, %f0" : "+w" (data_key));
-            /* xacc[i] += (uint64x2_t) data_key[0, 1] * (uint64x2_t) data_key[2, 3]; */
-            xacc[i] = vmlal_u32(xacc[i], vget_low_u32(data_key), vget_high_u32(data_key));
-
-#else
-            /* On aarch64, vshrn/vmovn seems to be equivalent to, if not faster than, the vzip method. */
-
-            /* data_vec = xsecret[i]; */
-            uint8x16_t const data_vec    = vld1q_u8(xinput + (i * 16));
-            /* key_vec  = xsecret[i];  */
-            uint8x16_t const key_vec     = vld1q_u8(xsecret  + (i * 16));
-            /* data_key = data_vec ^ key_vec; */
-            uint64x2_t const data_key    = vreinterpretq_u64_u8(veorq_u8(data_vec, key_vec));
-            /* data_key_lo = (uint32x2_t) (data_key & 0xFFFFFFFF); */
-            uint32x2_t const data_key_lo = vmovn_u64  (data_key);
-            /* data_key_hi = (uint32x2_t) (data_key >> 32); */
-            uint32x2_t const data_key_hi = vshrn_n_u64 (data_key, 32);
-            if (accWidth == XXPH3_acc_64bits) {
-                /* xacc[i] += data_vec; */
-                xacc[i] = vaddq_u64 (xacc[i], vreinterpretq_u64_u8(data_vec));
-            } else {  /* XXPH3_acc_128bits */
-                /* xacc[i] += swap(data_vec); */
-                uint64x2_t const data64 = vreinterpretq_u64_u8(data_vec);
-                uint64x2_t const swapped= vextq_u64(data64, data64, 1);
-                xacc[i] = vaddq_u64 (xacc[i], swapped);
-            }
-            /* xacc[i] += (uint64x2_t) data_key_lo * (uint64x2_t) data_key_hi; */
-            xacc[i] = vmlal_u32 (xacc[i], data_key_lo, data_key_hi);
-
-#endif
-        }
-    }
-
-#elif (XXPH_VECTOR == XXPH_VSX) && /* work around a compiler bug */ (__GNUC__ > 5)
-          U64x2* const xacc =        (U64x2*) acc;    /* presumed aligned */
-    U64x2 const* const xinput = (U64x2 const*) input;   /* no alignment restriction */
-    U64x2 const* const xsecret  = (U64x2 const*) secret;    /* no alignment restriction */
-    U64x2 const v32 = { 32,  32 };
-#if XXPH_VSX_BE
-    U8x16 const vXorSwap  = { 0x07, 0x16, 0x25, 0x34, 0x43, 0x52, 0x61, 0x70,
-                              0x8F, 0x9E, 0xAD, 0xBC, 0xCB, 0xDA, 0xE9, 0xF8 };
-#endif
-    size_t i;
-    for (i = 0; i < STRIPE_LEN / sizeof(U64x2); i++) {
-        /* data_vec = xinput[i]; */
-        /* key_vec = xsecret[i]; */
-#if XXPH_VSX_BE
-        /* byteswap */
-        U64x2 const data_vec = XXPH_vec_revb(vec_vsx_ld(0, xinput + i));
-        U64x2 const key_raw = vec_vsx_ld(0, xsecret + i);
-        /* See comment above. data_key = data_vec ^ swap(xsecret[i]); */
-        U64x2 const data_key = (U64x2)XXPH_vec_permxor((U8x16)data_vec, (U8x16)key_raw, vXorSwap);
-#else
-        U64x2 const data_vec = vec_vsx_ld(0, xinput + i);
-        U64x2 const key_vec = vec_vsx_ld(0, xsecret + i);
-        U64x2 const data_key = data_vec ^ key_vec;
-#endif
-        /* shuffled = (data_key << 32) | (data_key >> 32); */
-        U32x4 const shuffled = (U32x4)vec_rl(data_key, v32);
-        /* product = ((U64x2)data_key & 0xFFFFFFFF) * ((U64x2)shuffled & 0xFFFFFFFF); */
-        U64x2 const product = XXPH_vec_mulo((U32x4)data_key, shuffled);
-        xacc[i] += product;
-
-        if (accWidth == XXPH3_acc_64bits) {
-            xacc[i] += data_vec;
-        } else {  /* XXPH3_acc_128bits */
-            /* swap high and low halves */
-            U64x2 const data_swapped = vec_xxpermdi(data_vec, data_vec, 2);
-            xacc[i] += data_swapped;
-        }
-    }
-
-#else   /* scalar variant of Accumulator - universal */
-
-    XXPH_ALIGN(XXPH_ACC_ALIGN) xxh_u64* const xacc = (xxh_u64*) acc;    /* presumed aligned on 32-bytes boundaries, little hint for the auto-vectorizer */
-    const xxh_u8* const xinput = (const xxh_u8*) input;  /* no alignment restriction */
-    const xxh_u8* const xsecret  = (const xxh_u8*) secret;   /* no alignment restriction */
-    size_t i;
-    XXPH_ASSERT(((size_t)acc & (XXPH_ACC_ALIGN-1)) == 0);
-    for (i=0; i < ACC_NB; i++) {
-        xxh_u64 const data_val = XXPH_readLE64(xinput + 8*i);
-        xxh_u64 const data_key = data_val ^ XXPH_readLE64(xsecret + i*8);
-
-        if (accWidth == XXPH3_acc_64bits) {
-            xacc[i] += data_val;
-        } else {
-            xacc[i ^ 1] += data_val; /* swap adjacent lanes */
-        }
-        xacc[i] += XXPH_mult32to64(data_key & 0xFFFFFFFF, data_key >> 32);
-    }
-#endif
-}
-
-XXPH_FORCE_INLINE void
-XXPH3_scrambleAcc(void* XXPH_RESTRICT acc, const void* XXPH_RESTRICT secret)
-{
-#if (XXPH_VECTOR == XXPH_AVX2)
-
-    XXPH_ASSERT((((size_t)acc) & 31) == 0);
-    {   XXPH_ALIGN(32) __m256i* const xacc = (__m256i*) acc;
-        const         __m256i* const xsecret = (const __m256i *) secret;   /* not really aligned, just for ptr arithmetic, and because _mm256_loadu_si256() requires this argument type */
-        const __m256i prime32 = _mm256_set1_epi32((int)PRIME32_1);
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN/sizeof(__m256i); i++) {
-            /* xacc[i] ^= (xacc[i] >> 47) */
-            __m256i const acc_vec     = xacc[i];
-            __m256i const shifted     = _mm256_srli_epi64    (acc_vec, 47);
-            __m256i const data_vec    = _mm256_xor_si256     (acc_vec, shifted);
-            /* xacc[i] ^= xsecret; */
-            __m256i const key_vec     = _mm256_loadu_si256   (xsecret+i);
-            __m256i const data_key    = _mm256_xor_si256     (data_vec, key_vec);
-
-            /* xacc[i] *= PRIME32_1; */
-            __m256i const data_key_hi = _mm256_shuffle_epi32 (data_key, 0x31);
-            __m256i const prod_lo     = _mm256_mul_epu32     (data_key, prime32);
-            __m256i const prod_hi     = _mm256_mul_epu32     (data_key_hi, prime32);
-            xacc[i] = _mm256_add_epi64(prod_lo, _mm256_slli_epi64(prod_hi, 32));
-        }
-    }
-
-#elif (XXPH_VECTOR == XXPH_SSE2)
-
-    XXPH_ASSERT((((size_t)acc) & 15) == 0);
-    {   XXPH_ALIGN(16) __m128i* const xacc = (__m128i*) acc;
-        const         __m128i* const xsecret = (const __m128i *) secret;   /* not really aligned, just for ptr arithmetic, and because _mm_loadu_si128() requires this argument type */
-        const __m128i prime32 = _mm_set1_epi32((int)PRIME32_1);
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN/sizeof(__m128i); i++) {
-            /* xacc[i] ^= (xacc[i] >> 47) */
-            __m128i const acc_vec     = xacc[i];
-            __m128i const shifted     = _mm_srli_epi64    (acc_vec, 47);
-            __m128i const data_vec    = _mm_xor_si128     (acc_vec, shifted);
-            /* xacc[i] ^= xsecret; */
-            __m128i const key_vec     = _mm_loadu_si128   (xsecret+i);
-            __m128i const data_key    = _mm_xor_si128     (data_vec, key_vec);
-
-            /* xacc[i] *= PRIME32_1; */
-            __m128i const data_key_hi = _mm_shuffle_epi32 (data_key, 0x31);
-            __m128i const prod_lo     = _mm_mul_epu32     (data_key, prime32);
-            __m128i const prod_hi     = _mm_mul_epu32     (data_key_hi, prime32);
-            xacc[i] = _mm_add_epi64(prod_lo, _mm_slli_epi64(prod_hi, 32));
-        }
-    }
-
-#elif (XXPH_VECTOR == XXPH_NEON)
-
-    XXPH_ASSERT((((size_t)acc) & 15) == 0);
-
-    {   uint64x2_t* const xacc =     (uint64x2_t*) acc;
-        uint8_t const* const xsecret = (uint8_t const*) secret;
-        uint32x2_t const prime     = vdup_n_u32 (PRIME32_1);
-
-        size_t i;
-        for (i=0; i < STRIPE_LEN/sizeof(uint64x2_t); i++) {
-            /* data_vec = xacc[i] ^ (xacc[i] >> 47); */
-            uint64x2_t const   acc_vec  = xacc[i];
-            uint64x2_t const   shifted  = vshrq_n_u64 (acc_vec, 47);
-            uint64x2_t const   data_vec = veorq_u64   (acc_vec, shifted);
-
-            /* key_vec  = xsecret[i]; */
-            uint32x4_t const   key_vec  = vreinterpretq_u32_u8(vld1q_u8(xsecret + (i * 16)));
-            /* data_key = data_vec ^ key_vec; */
-            uint32x4_t const   data_key = veorq_u32   (vreinterpretq_u32_u64(data_vec), key_vec);
-            /* shuffled = { data_key[0, 2], data_key[1, 3] }; */
-            uint32x2x2_t const shuffled = vzip_u32    (vget_low_u32(data_key), vget_high_u32(data_key));
-
-            /* data_key *= PRIME32_1 */
-
-            /* prod_hi = (data_key >> 32) * PRIME32_1; */
-            uint64x2_t const   prod_hi = vmull_u32    (shuffled.val[1], prime);
-            /* xacc[i] = prod_hi << 32; */
-            xacc[i] = vshlq_n_u64(prod_hi, 32);
-            /* xacc[i] += (prod_hi & 0xFFFFFFFF) * PRIME32_1; */
-            xacc[i] = vmlal_u32(xacc[i], shuffled.val[0], prime);
-    }   }
-
-#elif (XXPH_VECTOR == XXPH_VSX) && /* work around a compiler bug */ (__GNUC__ > 5)
-
-          U64x2* const xacc =       (U64x2*) acc;
-    const U64x2* const xsecret = (const U64x2*) secret;
-    /* constants */
-    U64x2 const v32  = { 32, 32 };
-    U64x2 const v47 = { 47, 47 };
-    U32x4 const prime = { PRIME32_1, PRIME32_1, PRIME32_1, PRIME32_1 };
-    size_t i;
-#if XXPH_VSX_BE
-    /* endian swap */
-    U8x16 const vXorSwap  = { 0x07, 0x16, 0x25, 0x34, 0x43, 0x52, 0x61, 0x70,
-                              0x8F, 0x9E, 0xAD, 0xBC, 0xCB, 0xDA, 0xE9, 0xF8 };
-#endif
-    for (i = 0; i < STRIPE_LEN / sizeof(U64x2); i++) {
-        U64x2 const acc_vec  = xacc[i];
-        U64x2 const data_vec = acc_vec ^ (acc_vec >> v47);
-        /* key_vec = xsecret[i]; */
-#if XXPH_VSX_BE
-        /* swap bytes words */
-        U64x2 const key_raw  = vec_vsx_ld(0, xsecret + i);
-        U64x2 const data_key = (U64x2)XXPH_vec_permxor((U8x16)data_vec, (U8x16)key_raw, vXorSwap);
-#else
-        U64x2 const key_vec  = vec_vsx_ld(0, xsecret + i);
-        U64x2 const data_key = data_vec ^ key_vec;
-#endif
-
-        /* data_key *= PRIME32_1 */
-
-        /* prod_lo = ((U64x2)data_key & 0xFFFFFFFF) * ((U64x2)prime & 0xFFFFFFFF);  */
-        U64x2 const prod_even  = XXPH_vec_mule((U32x4)data_key, prime);
-        /* prod_hi = ((U64x2)data_key >> 32) * ((U64x2)prime >> 32);  */
-        U64x2 const prod_odd  = XXPH_vec_mulo((U32x4)data_key, prime);
-        xacc[i] = prod_odd + (prod_even << v32);
-    }
-
-#else   /* scalar variant of Scrambler - universal */
-
-    XXPH_ALIGN(XXPH_ACC_ALIGN) xxh_u64* const xacc = (xxh_u64*) acc;   /* presumed aligned on 32-bytes boundaries, little hint for the auto-vectorizer */
-    const xxh_u8* const xsecret = (const xxh_u8*) secret;   /* no alignment restriction */
-    size_t i;
-    XXPH_ASSERT((((size_t)acc) & (XXPH_ACC_ALIGN-1)) == 0);
-    for (i=0; i < ACC_NB; i++) {
-        xxh_u64 const key64 = XXPH_readLE64(xsecret + 8*i);
-        xxh_u64 acc64 = xacc[i];
-        acc64 ^= acc64 >> 47;
-        acc64 ^= key64;
-        acc64 *= PRIME32_1;
-        xacc[i] = acc64;
-    }
-
-#endif
-}
-
-#define XXPH_PREFETCH_DIST 384
-
-/* assumption : nbStripes will not overflow secret size */
-XXPH_FORCE_INLINE void
-XXPH3_accumulate(       xxh_u64* XXPH_RESTRICT acc,
-                const xxh_u8* XXPH_RESTRICT input,
-                const xxh_u8* XXPH_RESTRICT secret,
-                      size_t nbStripes,
-                      XXPH3_accWidth_e accWidth)
-{
-    size_t n;
-    for (n = 0; n < nbStripes; n++ ) {
-        const xxh_u8* const in = input + n*STRIPE_LEN;
-        XXPH_PREFETCH(in + XXPH_PREFETCH_DIST);
-        XXPH3_accumulate_512(acc,
-                            in,
-                            secret + n*XXPH_SECRET_CONSUME_RATE,
-                            accWidth);
-    }
-}
-
-/* note : clang auto-vectorizes well in SS2 mode _if_ this function is `static`,
- *        and doesn't auto-vectorize it at all if it is `FORCE_INLINE`.
- *        However, it auto-vectorizes better AVX2 if it is `FORCE_INLINE`
- *        Pretty much every other modes and compilers prefer `FORCE_INLINE`.
- */
-
-#if defined(__clang__) && (XXPH_VECTOR==0) && !defined(__AVX2__) && !defined(__arm__) && !defined(__thumb__)
-static void
-#else
-XXPH_FORCE_INLINE void
-#endif
-XXPH3_hashLong_internal_loop( xxh_u64* XXPH_RESTRICT acc,
-                      const xxh_u8* XXPH_RESTRICT input, size_t len,
-                      const xxh_u8* XXPH_RESTRICT secret, size_t secretSize,
-                            XXPH3_accWidth_e accWidth)
-{
-    size_t const nb_rounds = (secretSize - STRIPE_LEN) / XXPH_SECRET_CONSUME_RATE;
-    size_t const block_len = STRIPE_LEN * nb_rounds;
-    size_t const nb_blocks = len / block_len;
-
-    size_t n;
-
-    XXPH_ASSERT(secretSize >= XXPH3_SECRET_SIZE_MIN);
-
-    for (n = 0; n < nb_blocks; n++) {
-        XXPH3_accumulate(acc, input + n*block_len, secret, nb_rounds, accWidth);
-        XXPH3_scrambleAcc(acc, secret + secretSize - STRIPE_LEN);
-    }
-
-    /* last partial block */
-    XXPH_ASSERT(len > STRIPE_LEN);
-    {   size_t const nbStripes = (len - (block_len * nb_blocks)) / STRIPE_LEN;
-        XXPH_ASSERT(nbStripes <= (secretSize / XXPH_SECRET_CONSUME_RATE));
-        XXPH3_accumulate(acc, input + nb_blocks*block_len, secret, nbStripes, accWidth);
-
-        /* last stripe */
-        if (len & (STRIPE_LEN - 1)) {
-            const xxh_u8* const p = input + len - STRIPE_LEN;
-#define XXPH_SECRET_LASTACC_START 7  /* do not align on 8, so that secret is different from scrambler */
-            XXPH3_accumulate_512(acc, p, secret + secretSize - STRIPE_LEN - XXPH_SECRET_LASTACC_START, accWidth);
-    }   }
-}
-
-XXPH_FORCE_INLINE xxh_u64
-XXPH3_mix2Accs(const xxh_u64* XXPH_RESTRICT acc, const xxh_u8* XXPH_RESTRICT secret)
-{
-    return XXPH3_mul128_fold64(
-               acc[0] ^ XXPH_readLE64(secret),
-               acc[1] ^ XXPH_readLE64(secret+8) );
-}
-
-static XXPH64_hash_t
-XXPH3_mergeAccs(const xxh_u64* XXPH_RESTRICT acc, const xxh_u8* XXPH_RESTRICT secret, xxh_u64 start)
-{
-    xxh_u64 result64 = start;
-
-    result64 += XXPH3_mix2Accs(acc+0, secret +  0);
-    result64 += XXPH3_mix2Accs(acc+2, secret + 16);
-    result64 += XXPH3_mix2Accs(acc+4, secret + 32);
-    result64 += XXPH3_mix2Accs(acc+6, secret + 48);
-
-    return XXPH3_avalanche(result64);
-}
-
-#define XXPH3_INIT_ACC { PRIME32_3, PRIME64_1, PRIME64_2, PRIME64_3, \
-                        PRIME64_4, PRIME32_2, PRIME64_5, PRIME32_1 };
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_hashLong_internal(const xxh_u8* XXPH_RESTRICT input, size_t len,
-                       const xxh_u8* XXPH_RESTRICT secret, size_t secretSize)
-{
-    XXPH_ALIGN(XXPH_ACC_ALIGN) xxh_u64 acc[ACC_NB] = XXPH3_INIT_ACC;
-
-    XXPH3_hashLong_internal_loop(acc, input, len, secret, secretSize, XXPH3_acc_64bits);
-
-    /* converge into final hash */
-    XXPH_STATIC_ASSERT(sizeof(acc) == 64);
-#define XXPH_SECRET_MERGEACCS_START 11  /* do not align on 8, so that secret is different from accumulator */
-    XXPH_ASSERT(secretSize >= sizeof(acc) + XXPH_SECRET_MERGEACCS_START);
-    return XXPH3_mergeAccs(acc, secret + XXPH_SECRET_MERGEACCS_START, (xxh_u64)len * PRIME64_1);
-}
-
-
-XXPH_NO_INLINE XXPH64_hash_t    /* It's important for performance that XXPH3_hashLong is not inlined. Not sure why (uop cache maybe ?), but difference is large and easily measurable */
-XXPH3_hashLong_64b_defaultSecret(const xxh_u8* XXPH_RESTRICT input, size_t len)
-{
-    return XXPH3_hashLong_internal(input, len, kSecret, sizeof(kSecret));
-}
-
-XXPH_NO_INLINE XXPH64_hash_t    /* It's important for performance that XXPH3_hashLong is not inlined. Not sure why (uop cache maybe ?), but difference is large and easily measurable */
-XXPH3_hashLong_64b_withSecret(const xxh_u8* XXPH_RESTRICT input, size_t len,
-                             const xxh_u8* XXPH_RESTRICT secret, size_t secretSize)
-{
-    return XXPH3_hashLong_internal(input, len, secret, secretSize);
-}
-
-
-XXPH_FORCE_INLINE void XXPH_writeLE64(void* dst, xxh_u64 v64)
-{
-    if (!XXPH_CPU_LITTLE_ENDIAN) v64 = XXPH_swap64(v64);
-    memcpy(dst, &v64, sizeof(v64));
-}
-
-/* XXPH3_initCustomSecret() :
- * destination `customSecret` is presumed allocated and same size as `kSecret`.
- */
-XXPH_FORCE_INLINE void XXPH3_initCustomSecret(xxh_u8* customSecret, xxh_u64 seed64)
-{
-    int const nbRounds = XXPH_SECRET_DEFAULT_SIZE / 16;
-    int i;
-
-    XXPH_STATIC_ASSERT((XXPH_SECRET_DEFAULT_SIZE & 15) == 0);
-
-    for (i=0; i < nbRounds; i++) {
-        XXPH_writeLE64(customSecret + 16*i,     XXPH_readLE64(kSecret + 16*i)     + seed64);
-        XXPH_writeLE64(customSecret + 16*i + 8, XXPH_readLE64(kSecret + 16*i + 8) - seed64);
-    }
-}
-
-
-/* XXPH3_hashLong_64b_withSeed() :
- * Generate a custom key,
- * based on alteration of default kSecret with the seed,
- * and then use this key for long mode hashing.
- * This operation is decently fast but nonetheless costs a little bit of time.
- * Try to avoid it whenever possible (typically when seed==0).
- */
-XXPH_NO_INLINE XXPH64_hash_t    /* It's important for performance that XXPH3_hashLong is not inlined. Not sure why (uop cache maybe ?), but difference is large and easily measurable */
-XXPH3_hashLong_64b_withSeed(const xxh_u8* input, size_t len, XXPH64_hash_t seed)
-{
-    XXPH_ALIGN(8) xxh_u8 secret[XXPH_SECRET_DEFAULT_SIZE];
-    if (seed==0) return XXPH3_hashLong_64b_defaultSecret(input, len);
-    XXPH3_initCustomSecret(secret, seed);
-    return XXPH3_hashLong_internal(input, len, secret, sizeof(secret));
-}
-
-
-XXPH_FORCE_INLINE xxh_u64 XXPH3_mix16B(const xxh_u8* XXPH_RESTRICT input,
-                                 const xxh_u8* XXPH_RESTRICT secret, xxh_u64 seed64)
-{
-    xxh_u64 const input_lo = XXPH_readLE64(input);
-    xxh_u64 const input_hi = XXPH_readLE64(input+8);
-    return XXPH3_mul128_fold64(
-               input_lo ^ (XXPH_readLE64(secret)   + seed64),
-               input_hi ^ (XXPH_readLE64(secret+8) - seed64) );
-}
-
-
-XXPH_FORCE_INLINE XXPH64_hash_t
-XXPH3_len_17to128_64b(const xxh_u8* XXPH_RESTRICT input, size_t len,
-                     const xxh_u8* XXPH_RESTRICT secret, size_t secretSize,
-                     XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(secretSize >= XXPH3_SECRET_SIZE_MIN); (void)secretSize;
-    XXPH_ASSERT(16 < len && len <= 128);
-
-    {   xxh_u64 acc = len * PRIME64_1;
-        if (len > 32) {
-            if (len > 64) {
-                if (len > 96) {
-                    acc += XXPH3_mix16B(input+48, secret+96, seed);
-                    acc += XXPH3_mix16B(input+len-64, secret+112, seed);
-                }
-                acc += XXPH3_mix16B(input+32, secret+64, seed);
-                acc += XXPH3_mix16B(input+len-48, secret+80, seed);
-            }
-            acc += XXPH3_mix16B(input+16, secret+32, seed);
-            acc += XXPH3_mix16B(input+len-32, secret+48, seed);
-        }
-        acc += XXPH3_mix16B(input+0, secret+0, seed);
-        acc += XXPH3_mix16B(input+len-16, secret+16, seed);
-
-        return XXPH3_avalanche(acc);
-    }
-}
-
-#define XXPH3_MIDSIZE_MAX 240
-
-XXPH_NO_INLINE XXPH64_hash_t
-XXPH3_len_129to240_64b(const xxh_u8* XXPH_RESTRICT input, size_t len,
-                      const xxh_u8* XXPH_RESTRICT secret, size_t secretSize,
-                      XXPH64_hash_t seed)
-{
-    XXPH_ASSERT(secretSize >= XXPH3_SECRET_SIZE_MIN); (void)secretSize;
-    XXPH_ASSERT(128 < len && len <= XXPH3_MIDSIZE_MAX);
-
-    #define XXPH3_MIDSIZE_STARTOFFSET 3
-    #define XXPH3_MIDSIZE_LASTOFFSET  17
-
-    {   xxh_u64 acc = len * PRIME64_1;
-        int const nbRounds = (int)len / 16;
-        int i;
-        for (i=0; i<8; i++) {
-            acc += XXPH3_mix16B(input+(16*i), secret+(16*i), seed);
-        }
-        acc = XXPH3_avalanche(acc);
-        XXPH_ASSERT(nbRounds >= 8);
-        for (i=8 ; i < nbRounds; i++) {
-            acc += XXPH3_mix16B(input+(16*i), secret+(16*(i-8)) + XXPH3_MIDSIZE_STARTOFFSET, seed);
-        }
-        /* last bytes */
-        acc += XXPH3_mix16B(input + len - 16, secret + XXPH3_SECRET_SIZE_MIN - XXPH3_MIDSIZE_LASTOFFSET, seed);
-        return XXPH3_avalanche(acc);
-    }
-}
-
-/* ===   Public entry point   === */
-
-XXPH_PUBLIC_API XXPH64_hash_t XXPH3_64bits(const void* input, size_t len)
-{
-    if (len <= 16) return XXPH3_len_0to16_64b((const xxh_u8*)input, len, kSecret, 0);
-    if (len <= 128) return XXPH3_len_17to128_64b((const xxh_u8*)input, len, kSecret, sizeof(kSecret), 0);
-    if (len <= XXPH3_MIDSIZE_MAX) return XXPH3_len_129to240_64b((const xxh_u8*)input, len, kSecret, sizeof(kSecret), 0);
-    return XXPH3_hashLong_64b_defaultSecret((const xxh_u8*)input, len);
-}
-
-XXPH_PUBLIC_API XXPH64_hash_t
-XXPH3_64bits_withSecret(const void* input, size_t len, const void* secret, size_t secretSize)
-{
-    XXPH_ASSERT(secretSize >= XXPH3_SECRET_SIZE_MIN);
-    /* if an action must be taken should `secret` conditions not be respected,
-     * it should be done here.
-     * For now, it's a contract pre-condition.
-     * Adding a check and a branch here would cost performance at every hash */
-     if (len <= 16) return XXPH3_len_0to16_64b((const xxh_u8*)input, len, (const xxh_u8*)secret, 0);
-     if (len <= 128) return XXPH3_len_17to128_64b((const xxh_u8*)input, len, (const xxh_u8*)secret, secretSize, 0);
-     if (len <= XXPH3_MIDSIZE_MAX) return XXPH3_len_129to240_64b((const xxh_u8*)input, len, (const xxh_u8*)secret, secretSize, 0);
-     return XXPH3_hashLong_64b_withSecret((const xxh_u8*)input, len, (const xxh_u8*)secret, secretSize);
-}
-
-XXPH_PUBLIC_API XXPH64_hash_t
-XXPH3_64bits_withSeed(const void* input, size_t len, XXPH64_hash_t seed)
-{
-    if (len <= 16) return XXPH3_len_0to16_64b((const xxh_u8*)input, len, kSecret, seed);
-    if (len <= 128) return XXPH3_len_17to128_64b((const xxh_u8*)input, len, kSecret, sizeof(kSecret), seed);
-    if (len <= XXPH3_MIDSIZE_MAX) return XXPH3_len_129to240_64b((const xxh_u8*)input, len, kSecret, sizeof(kSecret), seed);
-    return XXPH3_hashLong_64b_withSeed((const xxh_u8*)input, len, seed);
-}
-
-/* ===   XXPH3 streaming   === */
-
-/* RocksDB Note: unused & removed due to bug in preview version */
-
-/*======== END #include "xxh3.h", now inlined above ==========*/
-
-#endif  /* XXPH_NO_LONG_LONG */
-
-/* === END RocksDB modification of permanently inlining === */
-
-#endif /*  defined(XXPH_INLINE_ALL) || defined(XXPH_PRIVATE_API) */
-
-#endif /* XXPH_STATIC_LINKING_ONLY */
-
-#if defined (__cplusplus)
-}
-#endif
-
-#endif /* XXPHASH_H_5627135585666179 */