react-cheminfo 0.9.0 → 0.11.0

package/lib/scatter3d/ui/cloudGeometry.d.ts

@@ -0,0 +1,108 @@
+/**
+ * Where the cube, the cloud and the shells land on screen for one camera.
+ *
+ * Everything a cloud draws is cut once, in cube units, and re-projected on
+ * every turn — so an orbit costs one multiply-add per vertex and nothing else.
+ * That is what keeps a drag smooth on a figure holding a dozen shells of a
+ * hundred and sixty faces each, and it is why the cutting and the projecting
+ * are two steps rather than one.
+ */
+import type { ScreenPoints } from '../../scatter/core/screenPoints.ts';
+import type { ConfidenceEllipsoid } from '../core/confidenceEllipsoid.ts';
+import type { OrbitCamera, OrbitViewport, Vector3 } from '../core/orbitCamera.ts';
+/** Room kept between the figure's edge and the cube, in pixels. */
+export declare const CLOUD_MARGIN = 16;
+/**
+ * How much of the shorter side the cube spans before the reader zooms.
+ *
+ * Well short of the whole: the cube is drawn turned, so its silhouette is a
+ * hexagon as wide as its body diagonal, and a cube sized to the box edge-on
+ * would push two of its corners past the frame the moment it was turned.
+ */
+export declare const CLOUD_FILL = 0.62;
+/** The rectangle the cloud is drawn in, and how the cube maps into it. */
+export interface CloudView {
+    /** The drawing area, ready to spread onto a `<rect>`. */
+    rect: {
+        x: number;
+        y: number;
+        width: number;
+        height: number;
+    };
+    /** Where the middle of the cube sits, and how large it is drawn. */
+    viewport: OrbitViewport;
+}
+/**
+ * The drawing area and the cube's place in it.
+ * @param width - Total width of the figure, in pixels.
+ * @param height - Total height.
+ * @param zoom - What the reader has zoomed to; `1` is the resting size.
+ * @returns See {@link CloudView}.
+ */
+export declare function cloudView(width: number, height: number, zoom: number): CloudView;
+/** Where every sample landed, and in what order they are painted. */
+export interface CloudCloud {
+    /** The positions, in the same space a gesture arrives in. */
+    points: ScreenPoints;
+    /** How far towards the reader each one is, in cube units. */
+    depths: Float64Array;
+    /** The rows, furthest first, which is the order they are drawn in. */
+    order: Uint32Array;
+}
+/**
+ * Every sample, projected and ordered back to front.
+ *
+ * The order is what makes the cloud read as a solid: a dot at the front drawn
+ * over a dot at the back says which is which, where the same two dots in row
+ * order say nothing at all. It is a separate array rather than a sorted copy
+ * of the points because the hit test, the labels and the selection all index
+ * by row and must not be reordered with the painting.
+ * @param cube - Every sample, in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns See {@link CloudCloud}.
+ */
+export declare function projectCloud(cube: readonly Vector3[], camera: OrbitCamera, viewport: OrbitViewport): CloudCloud;
+/** One shell's outline, ready to be filled. */
+export interface CloudOutline {
+    /** Where its middle landed, in pixels from the left. */
+    cx: number;
+    /** And from the top. */
+    cy: number;
+    /** Half its longest width, in pixels. */
+    rx: number;
+    /** Half its width across that, in pixels. */
+    ry: number;
+    /** How far the long axis is turned from the horizontal, in degrees. */
+    angle: number;
+    /** How far towards the reader its middle is, in cube units. */
+    depth: number;
+}
+/**
+ * Where one shell's outline lands on screen.
+ * @param ellipsoid - The shell, in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns See {@link CloudOutline}, or `null` when the camera sends the shell nowhere a browser can draw.
+ */
+export declare function projectShellOutline(ellipsoid: ConfidenceEllipsoid, camera: OrbitCamera, viewport: OrbitViewport): CloudOutline | null;
+/** A segment of the frame, in pixels. */
+export interface CloudSegment {
+    /** Where it starts. */
+    x1: number;
+    /** Where it starts. */
+    y1: number;
+    /** Where it ends. */
+    x2: number;
+    /** Where it ends. */
+    y2: number;
+}
+/**
+ * A run of cube-space segments, projected.
+ * @param segments - The segments, as pairs of corners in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns The segments, in pixels, in the order they were given.
+ */
+export declare function projectSegments(segments: ReadonlyArray<readonly [Vector3, Vector3]>, camera: OrbitCamera, viewport: OrbitViewport): CloudSegment[];
+//# sourceMappingURL=cloudGeometry.d.ts.map

package/lib/scatter3d/ui/cloudGeometry.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudGeometry.d.ts","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudGeometry.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAEH,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,oCAAoC,CAAC;AACvE,OAAO,KAAK,EAAE,mBAAmB,EAAE,MAAM,gCAAgC,CAAC;AAE1E,OAAO,KAAK,EACV,WAAW,EACX,aAAa,EACb,OAAO,EACR,MAAM,wBAAwB,CAAC;AAGhC,mEAAmE;AACnE,eAAO,MAAM,YAAY,KAAK,CAAC;AAE/B;;;;;;GAMG;AACH,eAAO,MAAM,UAAU,OAAO,CAAC;AAE/B,0EAA0E;AAC1E,MAAM,WAAW,SAAS;IACxB,yDAAyD;IACzD,IAAI,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,MAAM,CAAA;KAAE,CAAC;IAC9D,oEAAoE;IACpE,QAAQ,EAAE,aAAa,CAAC;CACzB;AAED;;;;;;GAMG;AACH,wBAAgB,SAAS,CACvB,KAAK,EAAE,MAAM,EACb,MAAM,EAAE,MAAM,EACd,IAAI,EAAE,MAAM,GACX,SAAS,CAYX;AAED,qEAAqE;AACrE,MAAM,WAAW,UAAU;IACzB,6DAA6D;IAC7D,MAAM,EAAE,YAAY,CAAC;IACrB,6DAA6D;IAC7D,MAAM,EAAE,YAAY,CAAC;IACrB,sEAAsE;IACtE,KAAK,EAAE,WAAW,CAAC;CACpB;AAED;;;;;;;;;;;;GAYG;AACH,wBAAgB,YAAY,CAC1B,IAAI,EAAE,SAAS,OAAO,EAAE,EACxB,MAAM,EAAE,WAAW,EACnB,QAAQ,EAAE,aAAa,GACtB,UAAU,CAmBZ;AAED,+CAA+C;AAC/C,MAAM,WAAW,YAAY;IAC3B,wDAAwD;IACxD,EAAE,EAAE,MAAM,CAAC;IACX,wBAAwB;IACxB,EAAE,EAAE,MAAM,CAAC;IACX,yCAAyC;IACzC,EAAE,EAAE,MAAM,CAAC;IACX,6CAA6C;IAC7C,EAAE,EAAE,MAAM,CAAC;IACX,uEAAuE;IACvE,KAAK,EAAE,MAAM,CAAC;IACd,+DAA+D;IAC/D,KAAK,EAAE,MAAM,CAAC;CACf;AAED;;;;;;GAMG;AACH,wBAAgB,mBAAmB,CACjC,SAAS,EAAE,mBAAmB,EAC9B,MAAM,EAAE,WAAW,EACnB,QAAQ,EAAE,aAAa,GACtB,YAAY,GAAG,IAAI,CAerB;AAED,yCAAyC;AACzC,MAAM,WAAW,YAAY;IAC3B,uBAAuB;IACvB,EAAE,EAAE,MAAM,CAAC;IACX,uBAAuB;IACvB,EAAE,EAAE,MAAM,CAAC;IACX,qBAAqB;IACrB,EAAE,EAAE,MAAM,CAAC;IACX,qBAAqB;IACrB,EAAE,EAAE,MAAM,CAAC;CACZ;AAED;;;;;;GAMG;AACH,wBAAgB,eAAe,CAC7B,QAAQ,EAAE,aAAa,CAAC,SAAS,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC,EACpD,MAAM,EAAE,WAAW,EACnB,QAAQ,EAAE,aAAa,GACtB,YAAY,EAAE,CAahB"}

package/lib/scatter3d/ui/cloudGeometry.js

@@ -0,0 +1,122 @@
+/**
+ * Where the cube, the cloud and the shells land on screen for one camera.
+ *
+ * Everything a cloud draws is cut once, in cube units, and re-projected on
+ * every turn — so an orbit costs one multiply-add per vertex and nothing else.
+ * That is what keeps a drag smooth on a figure holding a dozen shells of a
+ * hundred and sixty faces each, and it is why the cutting and the projecting
+ * are two steps rather than one.
+ */
+import { ellipsoidSilhouette } from "../core/ellipsoidSilhouette.js";
+import { projectPoint } from "../core/orbitCamera.js";
+/** Room kept between the figure's edge and the cube, in pixels. */
+export const CLOUD_MARGIN = 16;
+/**
+ * How much of the shorter side the cube spans before the reader zooms.
+ *
+ * Well short of the whole: the cube is drawn turned, so its silhouette is a
+ * hexagon as wide as its body diagonal, and a cube sized to the box edge-on
+ * would push two of its corners past the frame the moment it was turned.
+ */
+export const CLOUD_FILL = 0.62;
+/**
+ * The drawing area and the cube's place in it.
+ * @param width - Total width of the figure, in pixels.
+ * @param height - Total height.
+ * @param zoom - What the reader has zoomed to; `1` is the resting size.
+ * @returns See {@link CloudView}.
+ */
+export function cloudView(width, height, zoom) {
+    const inner = Math.max(0, width - CLOUD_MARGIN * 2);
+    const tall = Math.max(0, height - CLOUD_MARGIN * 2);
+    const factor = Number.isFinite(zoom) && zoom > 0 ? zoom : 1;
+    return {
+        rect: { x: CLOUD_MARGIN, y: CLOUD_MARGIN, width: inner, height: tall },
+        viewport: {
+            scale: (Math.min(inner, tall) / 2) * CLOUD_FILL * factor,
+            centerX: CLOUD_MARGIN + inner / 2,
+            centerY: CLOUD_MARGIN + tall / 2,
+        },
+    };
+}
+/**
+ * Every sample, projected and ordered back to front.
+ *
+ * The order is what makes the cloud read as a solid: a dot at the front drawn
+ * over a dot at the back says which is which, where the same two dots in row
+ * order say nothing at all. It is a separate array rather than a sorted copy
+ * of the points because the hit test, the labels and the selection all index
+ * by row and must not be reordered with the painting.
+ * @param cube - Every sample, in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns See {@link CloudCloud}.
+ */
+export function projectCloud(cube, camera, viewport) {
+    const count = cube.length;
+    const x = new Float64Array(count);
+    const y = new Float64Array(count);
+    const depths = new Float64Array(count);
+    for (let index = 0; index < count; index++) {
+        const at = projectPoint(cube[index], camera, viewport);
+        x[index] = at.x;
+        y[index] = at.y;
+        depths[index] = at.depth;
+    }
+    const rows = new Uint32Array(count);
+    for (let index = 0; index < count; index++)
+        rows[index] = index;
+    const order = rows.toSorted((a, b) => depths[a] - depths[b]);
+    return { points: { x, y }, depths, order };
+}
+/**
+ * Where one shell's outline lands on screen.
+ * @param ellipsoid - The shell, in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns See {@link CloudOutline}, or `null` when the camera sends the shell nowhere a browser can draw.
+ */
+export function projectShellOutline(ellipsoid, camera, viewport) {
+    const at = projectPoint(ellipsoid.center, camera, viewport);
+    const { rx, ry, angle } = ellipsoidSilhouette(ellipsoid, camera);
+    const outline = {
+        cx: round(at.x),
+        cy: round(at.y),
+        rx: round(rx * viewport.scale),
+        ry: round(ry * viewport.scale),
+        angle: round((angle * 180) / Math.PI),
+        depth: at.depth,
+    };
+    for (const value of [outline.cx, outline.cy, outline.rx, outline.ry]) {
+        if (!Number.isFinite(value))
+            return null;
+    }
+    return outline;
+}
+/**
+ * A run of cube-space segments, projected.
+ * @param segments - The segments, as pairs of corners in cube units.
+ * @param camera - Where the reader is standing.
+ * @param viewport - Where the middle of the cube is, and how large it is drawn.
+ * @returns The segments, in pixels, in the order they were given.
+ */
+export function projectSegments(segments, camera, viewport) {
+    const lines = [];
+    for (const [from, to] of segments) {
+        const start = projectPoint(from, camera, viewport);
+        const end = projectPoint(to, camera, viewport);
+        lines.push({
+            x1: round(start.x),
+            y1: round(start.y),
+            x2: round(end.x),
+            y2: round(end.y),
+        });
+    }
+    return lines;
+}
+/*
+ * Two decimals, which is under a tenth of a device pixel at any zoom a browser
+ * offers and keeps the markup short enough to read in a failing test.
+ */
+const round = (value) => Math.round(value * 100) / 100;
+//# sourceMappingURL=cloudGeometry.js.map

package/lib/scatter3d/ui/cloudGeometry.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudGeometry.js","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudGeometry.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAIH,OAAO,EAAE,mBAAmB,EAAE,MAAM,gCAAgC,CAAC;AAMrE,OAAO,EAAE,YAAY,EAAE,MAAM,wBAAwB,CAAC;AAEtD,mEAAmE;AACnE,MAAM,CAAC,MAAM,YAAY,GAAG,EAAE,CAAC;AAE/B;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,UAAU,GAAG,IAAI,CAAC;AAU/B;;;;;;GAMG;AACH,MAAM,UAAU,SAAS,CACvB,KAAa,EACb,MAAc,EACd,IAAY;IAEZ,MAAM,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,KAAK,GAAG,YAAY,GAAG,CAAC,CAAC,CAAC;IACpD,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,MAAM,GAAG,YAAY,GAAG,CAAC,CAAC,CAAC;IACpD,MAAM,MAAM,GAAG,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;IAC5D,OAAO;QACL,IAAI,EAAE,EAAE,CAAC,EAAE,YAAY,EAAE,CAAC,EAAE,YAAY,EAAE,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,IAAI,EAAE;QACtE,QAAQ,EAAE;YACR,KAAK,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,KAAK,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,UAAU,GAAG,MAAM;YACxD,OAAO,EAAE,YAAY,GAAG,KAAK,GAAG,CAAC;YACjC,OAAO,EAAE,YAAY,GAAG,IAAI,GAAG,CAAC;SACjC;KACF,CAAC;AACJ,CAAC;AAYD;;;;;;;;;;;;GAYG;AACH,MAAM,UAAU,YAAY,CAC1B,IAAwB,EACxB,MAAmB,EACnB,QAAuB;IAEvB,MAAM,KAAK,GAAG,IAAI,CAAC,MAAM,CAAC;IAC1B,MAAM,CAAC,GAAG,IAAI,YAAY,CAAC,KAAK,CAAC,CAAC;IAClC,MAAM,CAAC,GAAG,IAAI,YAAY,CAAC,KAAK,CAAC,CAAC;IAClC,MAAM,MAAM,GAAG,IAAI,YAAY,CAAC,KAAK,CAAC,CAAC;IACvC,KAAK,IAAI,KAAK,GAAG,CAAC,EAAE,KAAK,GAAG,KAAK,EAAE,KAAK,EAAE,EAAE,CAAC;QAC3C,MAAM,EAAE,GAAG,YAAY,CAAC,IAAI,CAAC,KAAK,CAAY,EAAE,MAAM,EAAE,QAAQ,CAAC,CAAC;QAClE,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC;QAChB,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC;QAChB,MAAM,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC;IAC3B,CAAC;IAED,MAAM,IAAI,GAAG,IAAI,WAAW,CAAC,KAAK,CAAC,CAAC;IACpC,KAAK,IAAI,KAAK,GAAG,CAAC,EAAE,KAAK,GAAG,KAAK,EAAE,KAAK,EAAE;QAAE,IAAI,CAAC,KAAK,CAAC,GAAG,KAAK,CAAC;IAChE,MAAM,KAAK,GAAG,IAAI,CAAC,QAAQ,CACzB,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAE,MAAM,CAAC,CAAC,CAAY,GAAI,MAAM,CAAC,CAAC,CAAY,CACxD,CAAC;IAEF,OAAO,EAAE,MAAM,EAAE,EAAE,CAAC,EAAE,CAAC,EAAE,EAAE,MAAM,EAAE,KAAK,EAAE,CAAC;AAC7C,CAAC;AAkBD;;;;;;GAMG;AACH,MAAM,UAAU,mBAAmB,CACjC,SAA8B,EAC9B,MAAmB,EACnB,QAAuB;IAEvB,MAAM,EAAE,GAAG,YAAY,CAAC,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,QAAQ,CAAC,CAAC;IAC5D,MAAM,EAAE,EAAE,EAAE,EAAE,EAAE,KAAK,EAAE,GAAG,mBAAmB,CAAC,SAAS,EAAE,MAAM,CAAC,CAAC;IACjE,MAAM,OAAO,GAAG;QACd,EAAE,EAAE,KAAK,CAAC,EAAE,CAAC,CAAC,CAAC;QACf,EAAE,EAAE,KAAK,CAAC,EAAE,CAAC,CAAC,CAAC;QACf,EAAE,EAAE,KAAK,CAAC,EAAE,GAAG,QAAQ,CAAC,KAAK,CAAC;QAC9B,EAAE,EAAE,KAAK,CAAC,EAAE,GAAG,QAAQ,CAAC,KAAK,CAAC;QAC9B,KAAK,EAAE,KAAK,CAAC,CAAC,KAAK,GAAG,GAAG,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC;QACrC,KAAK,EAAE,EAAE,CAAC,KAAK;KAChB,CAAC;IACF,KAAK,MAAM,KAAK,IAAI,CAAC,OAAO,CAAC,EAAE,EAAE,OAAO,CAAC,EAAE,EAAE,OAAO,CAAC,EAAE,EAAE,OAAO,CAAC,EAAE,CAAC,EAAE,CAAC;QACrE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC;YAAE,OAAO,IAAI,CAAC;IAC3C,CAAC;IACD,OAAO,OAAO,CAAC;AACjB,CAAC;AAcD;;;;;;GAMG;AACH,MAAM,UAAU,eAAe,CAC7B,QAAoD,EACpD,MAAmB,EACnB,QAAuB;IAEvB,MAAM,KAAK,GAAmB,EAAE,CAAC;IACjC,KAAK,MAAM,CAAC,IAAI,EAAE,EAAE,CAAC,IAAI,QAAQ,EAAE,CAAC;QAClC,MAAM,KAAK,GAAG,YAAY,CAAC,IAAI,EAAE,MAAM,EAAE,QAAQ,CAAC,CAAC;QACnD,MAAM,GAAG,GAAG,YAAY,CAAC,EAAE,EAAE,MAAM,EAAE,QAAQ,CAAC,CAAC;QAC/C,KAAK,CAAC,IAAI,CAAC;YACT,EAAE,EAAE,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC;YAClB,EAAE,EAAE,KAAK,CAAC,KAAK,CAAC,CAAC,CAAC;YAClB,EAAE,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC;YAChB,EAAE,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC;SACjB,CAAC,CAAC;IACL,CAAC;IACD,OAAO,KAAK,CAAC;AACf,CAAC;AAED;;;GAGG;AACH,MAAM,KAAK,GAAG,CAAC,KAAa,EAAU,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,GAAG,CAAC,GAAG,GAAG,CAAC"}

package/lib/scatter3d/ui/cloudShellStyles.d.ts

@@ -0,0 +1,36 @@
+/**
+ * How solid the glass is, and how it thickens from the middle to the rim.
+ */
+/**
+ * How solid one wall of the glass is, seen square on, by default.
+ *
+ * Low, because a ray straight through a shell already meets two walls, and two
+ * shells that overlap put four in the reader's way.
+ */
+export declare const SHELL_FILL_OPACITY = 0.1;
+/** One stop of the glass gradient. */
+export interface ShellGlassStop {
+    /** How far out it sits, from `0` at the middle to `1` at the rim. */
+    offset: number;
+    /** How solid the glass is there. */
+    opacity: number;
+}
+/**
+ * The gradient one shell is filled with, which is what gives it its relief.
+ *
+ * A shell is a surface, not a filled solid, so what the reader looks through
+ * is two walls of it. Straight through the middle they are met square on and
+ * the glass is at its thinnest; towards the rim the same two walls are met at
+ * a closing angle and the path through them lengthens as the secant of it, so
+ * the shell swells towards its edge and reads as round. That is the whole of
+ * the modelling the tessellated version did, minus the seams between the faces
+ * it needed to do it.
+ *
+ * The walls are composited rather than added, so two of them at a tenth are
+ * not a fifth but a nineteenth-something — the same arithmetic the browser was
+ * doing when they were stacked polygons.
+ * @param strength - How solid one wall is, after the group's own opacity.
+ * @returns The stops, from the middle outwards.
+ */
+export declare function shellGlassStops(strength: number): ShellGlassStop[];
+//# sourceMappingURL=cloudShellStyles.d.ts.map

package/lib/scatter3d/ui/cloudShellStyles.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudShellStyles.d.ts","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudShellStyles.ts"],"names":[],"mappings":"AAAA;;GAEG;AAEH;;;;;GAKG;AACH,eAAO,MAAM,kBAAkB,MAAM,CAAC;AAYtC,sCAAsC;AACtC,MAAM,WAAW,cAAc;IAC7B,qEAAqE;IACrE,MAAM,EAAE,MAAM,CAAC;IACf,oCAAoC;IACpC,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,wBAAgB,eAAe,CAAC,QAAQ,EAAE,MAAM,GAAG,cAAc,EAAE,CAOlE"}

package/lib/scatter3d/ui/cloudShellStyles.js

@@ -0,0 +1,62 @@
+/**
+ * How solid the glass is, and how it thickens from the middle to the rim.
+ */
+/**
+ * How solid one wall of the glass is, seen square on, by default.
+ *
+ * Low, because a ray straight through a shell already meets two walls, and two
+ * shells that overlap put four in the reader's way.
+ */
+export const SHELL_FILL_OPACITY = 0.1;
+/**
+ * How many walls' worth of glass the rim is allowed to reach.
+ *
+ * The path through a shell grows as the secant of the angle it is seen at, so
+ * at the silhouette it is unbounded and the rim would go opaque. Held to a few
+ * walls it reads as the swell of a ball; unheld it reads as a ring drawn round
+ * a disc, which is the wireframe this fill replaced.
+ */
+const RIM_WALLS = 6;
+/**
+ * The gradient one shell is filled with, which is what gives it its relief.
+ *
+ * A shell is a surface, not a filled solid, so what the reader looks through
+ * is two walls of it. Straight through the middle they are met square on and
+ * the glass is at its thinnest; towards the rim the same two walls are met at
+ * a closing angle and the path through them lengthens as the secant of it, so
+ * the shell swells towards its edge and reads as round. That is the whole of
+ * the modelling the tessellated version did, minus the seams between the faces
+ * it needed to do it.
+ *
+ * The walls are composited rather than added, so two of them at a tenth are
+ * not a fifth but a nineteenth-something — the same arithmetic the browser was
+ * doing when they were stacked polygons.
+ * @param strength - How solid one wall is, after the group's own opacity.
+ * @returns The stops, from the middle outwards.
+ */
+export function shellGlassStops(strength) {
+    const wall = Math.min(1, Math.max(0, strength));
+    const clear = 1 - wall;
+    return GLASS_OFFSETS.map((offset) => ({
+        offset,
+        opacity: round(1 - clear ** wallsAt(offset)),
+    }));
+}
+/**
+ * How much glass a ray meets at a given distance out from the middle.
+ * @param offset - How far out, from `0` at the middle to `1` at the rim.
+ * @returns The number of walls' worth, held to {@link RIM_WALLS}.
+ */
+function wallsAt(offset) {
+    const facing = Math.sqrt(Math.max(0, 1 - offset * offset));
+    if (facing <= 0)
+        return RIM_WALLS;
+    return Math.min(RIM_WALLS, 2 / facing);
+}
+/*
+ * Close together near the rim, where the glass thickens quickest, and sparse
+ * through the middle, where it barely changes.
+ */
+const GLASS_OFFSETS = [0, 0.3, 0.5, 0.66, 0.78, 0.87, 0.93, 0.97, 1];
+const round = (value) => Math.round(value * 10000) / 10000;
+//# sourceMappingURL=cloudShellStyles.js.map

package/lib/scatter3d/ui/cloudShellStyles.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudShellStyles.js","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudShellStyles.ts"],"names":[],"mappings":"AAAA;;GAEG;AAEH;;;;;GAKG;AACH,MAAM,CAAC,MAAM,kBAAkB,GAAG,GAAG,CAAC;AAEtC;;;;;;;GAOG;AACH,MAAM,SAAS,GAAG,CAAC,CAAC;AAUpB;;;;;;;;;;;;;;;;GAgBG;AACH,MAAM,UAAU,eAAe,CAAC,QAAgB;IAC9C,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,QAAQ,CAAC,CAAC,CAAC;IAChD,MAAM,KAAK,GAAG,CAAC,GAAG,IAAI,CAAC;IACvB,OAAO,aAAa,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;QACpC,MAAM;QACN,OAAO,EAAE,KAAK,CAAC,CAAC,GAAG,KAAK,IAAI,OAAO,CAAC,MAAM,CAAC,CAAC;KAC7C,CAAC,CAAC,CAAC;AACN,CAAC;AAED;;;;GAIG;AACH,SAAS,OAAO,CAAC,MAAc;IAC7B,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,GAAG,MAAM,GAAG,MAAM,CAAC,CAAC,CAAC;IAC3D,IAAI,MAAM,IAAI,CAAC;QAAE,OAAO,SAAS,CAAC;IAClC,OAAO,IAAI,CAAC,GAAG,CAAC,SAAS,EAAE,CAAC,GAAG,MAAM,CAAC,CAAC;AACzC,CAAC;AAED;;;GAGG;AACH,MAAM,aAAa,GAAG,CAAC,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,CAAC,CAAC,CAAC;AAErE,MAAM,KAAK,GAAG,CAAC,KAAa,EAAU,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,KAAK,CAAC,GAAG,KAAK,CAAC"}

package/lib/scatter3d/ui/cloudZoom.d.ts

@@ -0,0 +1,21 @@
+/**
+ * How far the reader may stand back from the box, and how near they may get.
+ *
+ * A cloud without a zoom cannot be read where its groups overlap, which on a
+ * projection is exactly where the reader is looking. The range is kept modest
+ * at both ends: past four the frame is off the picture and there is nothing
+ * left to say which way is which, and below four tenths the cloud is a smudge
+ * in the middle of an empty box.
+ */
+/** How far the wheel may zoom out and in. */
+export declare const CLOUD_ZOOM_RANGE: {
+    readonly min: 0.4;
+    readonly max: 4;
+};
+/**
+ * A zoom held inside what the box can usefully be seen at.
+ * @param zoom - The zoom asked for.
+ * @returns The zoom to draw at; `1` for anything that is not a number.
+ */
+export declare function clampCloudZoom(zoom: number): number;
+//# sourceMappingURL=cloudZoom.d.ts.map

package/lib/scatter3d/ui/cloudZoom.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudZoom.d.ts","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudZoom.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAEH,6CAA6C;AAC7C,eAAO,MAAM,gBAAgB;;;CAAgC,CAAC;AAE9D;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CAGnD"}

package/lib/scatter3d/ui/cloudZoom.js

@@ -0,0 +1,22 @@
+/**
+ * How far the reader may stand back from the box, and how near they may get.
+ *
+ * A cloud without a zoom cannot be read where its groups overlap, which on a
+ * projection is exactly where the reader is looking. The range is kept modest
+ * at both ends: past four the frame is off the picture and there is nothing
+ * left to say which way is which, and below four tenths the cloud is a smudge
+ * in the middle of an empty box.
+ */
+/** How far the wheel may zoom out and in. */
+export const CLOUD_ZOOM_RANGE = { min: 0.4, max: 4 };
+/**
+ * A zoom held inside what the box can usefully be seen at.
+ * @param zoom - The zoom asked for.
+ * @returns The zoom to draw at; `1` for anything that is not a number.
+ */
+export function clampCloudZoom(zoom) {
+    if (!Number.isFinite(zoom))
+        return 1;
+    return Math.min(CLOUD_ZOOM_RANGE.max, Math.max(CLOUD_ZOOM_RANGE.min, zoom));
+}
+//# sourceMappingURL=cloudZoom.js.map

package/lib/scatter3d/ui/cloudZoom.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"cloudZoom.js","sourceRoot":"","sources":["../../../src/scatter3d/ui/cloudZoom.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAEH,6CAA6C;AAC7C,MAAM,CAAC,MAAM,gBAAgB,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC,EAAW,CAAC;AAE9D;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,IAAY;IACzC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,CAAC,CAAC;IACrC,OAAO,IAAI,CAAC,GAAG,CAAC,gBAAgB,CAAC,GAAG,EAAE,IAAI,CAAC,GAAG,CAAC,gBAAgB,CAAC,GAAG,EAAE,IAAI,CAAC,CAAC,CAAC;AAC9E,CAAC"}

package/lib/scatter3d/ui/index.d.ts

@@ -0,0 +1,29 @@
+/**
+ * A cloud of samples in a box the reader can turn.
+ *
+ * It is the `scatter` domain's twin, and deliberately so: the same selection,
+ * the same lasso, the same hover card, the same labels and the same group
+ * colours, so that a reader who has learned the map has learned this too. What
+ * is new is everything the third axis forces — a box to say which way is up, a
+ * drag that turns it, glass shells instead of outlines, and one scale across
+ * all three axes, because a solid seen from an angle has nowhere to write
+ * three sets of tick labels.
+ */
+export type { CloudFrameLayerProps } from './CloudFrameLayer.tsx';
+export { CloudFrameLayer } from './CloudFrameLayer.tsx';
+export type { CloudPointLayerProps } from './CloudPointLayer.tsx';
+export { CloudPointLayer } from './CloudPointLayer.tsx';
+export type { CloudShell, CloudShellLayerProps } from './CloudShellLayer.tsx';
+export { CloudShellLayer } from './CloudShellLayer.tsx';
+export type { CloudCloud, CloudOutline, CloudSegment, CloudView, } from './cloudGeometry.ts';
+export { CLOUD_FILL, CLOUD_MARGIN, cloudView, projectCloud, projectSegments, projectShellOutline, } from './cloudGeometry.ts';
+export type { ShellGlassStop } from './cloudShellStyles.ts';
+export { SHELL_FILL_OPACITY, shellGlassStops } from './cloudShellStyles.ts';
+export { CLOUD_ZOOM_RANGE, clampCloudZoom } from './cloudZoom.ts';
+export type { CloudShellsInput } from './scatterCloudModel.ts';
+export { cloudLabel, cloudShells } from './scatterCloudModel.ts';
+export type { CloudGesture, ScatterCloudProps } from './scatterCloudProps.ts';
+export { ScatterCloud } from './ScatterCloud.tsx';
+export type { OrbitDrag, OrbitDragOptions } from './useOrbitDrag.ts';
+export { useOrbitDrag } from './useOrbitDrag.ts';
+//# sourceMappingURL=index.d.ts.map

package/lib/scatter3d/ui/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/scatter3d/ui/index.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;GAUG;AAEH,YAAY,EAAE,oBAAoB,EAAE,MAAM,uBAAuB,CAAC;AAClE,OAAO,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAC;AACxD,YAAY,EAAE,oBAAoB,EAAE,MAAM,uBAAuB,CAAC;AAClE,OAAO,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAC;AACxD,YAAY,EAAE,UAAU,EAAE,oBAAoB,EAAE,MAAM,uBAAuB,CAAC;AAC9E,OAAO,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAC;AACxD,YAAY,EACV,UAAU,EACV,YAAY,EACZ,YAAY,EACZ,SAAS,GACV,MAAM,oBAAoB,CAAC;AAC5B,OAAO,EACL,UAAU,EACV,YAAY,EACZ,SAAS,EACT,YAAY,EACZ,eAAe,EACf,mBAAmB,GACpB,MAAM,oBAAoB,CAAC;AAC5B,YAAY,EAAE,cAAc,EAAE,MAAM,uBAAuB,CAAC;AAC5D,OAAO,EAAE,kBAAkB,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAC;AAC5E,OAAO,EAAE,gBAAgB,EAAE,cAAc,EAAE,MAAM,gBAAgB,CAAC;AAClE,YAAY,EAAE,gBAAgB,EAAE,MAAM,wBAAwB,CAAC;AAC/D,OAAO,EAAE,UAAU,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AACjE,YAAY,EAAE,YAAY,EAAE,iBAAiB,EAAE,MAAM,wBAAwB,CAAC;AAC9E,OAAO,EAAE,YAAY,EAAE,MAAM,oBAAoB,CAAC;AAClD,YAAY,EAAE,SAAS,EAAE,gBAAgB,EAAE,MAAM,mBAAmB,CAAC;AACrE,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC"}

package/lib/scatter3d/ui/index.js

@@ -0,0 +1,21 @@
+/**
+ * A cloud of samples in a box the reader can turn.
+ *
+ * It is the `scatter` domain's twin, and deliberately so: the same selection,
+ * the same lasso, the same hover card, the same labels and the same group
+ * colours, so that a reader who has learned the map has learned this too. What
+ * is new is everything the third axis forces — a box to say which way is up, a
+ * drag that turns it, glass shells instead of outlines, and one scale across
+ * all three axes, because a solid seen from an angle has nowhere to write
+ * three sets of tick labels.
+ */
+export { CloudFrameLayer } from "./CloudFrameLayer.js";
+export { CloudPointLayer } from "./CloudPointLayer.js";
+export { CloudShellLayer } from "./CloudShellLayer.js";
+export { CLOUD_FILL, CLOUD_MARGIN, cloudView, projectCloud, projectSegments, projectShellOutline, } from "./cloudGeometry.js";
+export { SHELL_FILL_OPACITY, shellGlassStops } from "./cloudShellStyles.js";
+export { CLOUD_ZOOM_RANGE, clampCloudZoom } from "./cloudZoom.js";
+export { cloudLabel, cloudShells } from "./scatterCloudModel.js";
+export { ScatterCloud } from "./ScatterCloud.js";
+export { useOrbitDrag } from "./useOrbitDrag.js";
+//# sourceMappingURL=index.js.map

package/lib/scatter3d/ui/index.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.js","sourceRoot":"","sources":["../../../src/scatter3d/ui/index.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;GAUG;AAGH,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAuB,CAAC;AAExD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAuB,CAAC;AAExD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAuB,CAAC;AAOxD,OAAO,EACL,UAAU,EACV,YAAY,EACZ,SAAS,EACT,YAAY,EACZ,eAAe,EACf,mBAAmB,GACpB,MAAM,oBAAoB,CAAC;AAE5B,OAAO,EAAE,kBAAkB,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAC;AAC5E,OAAO,EAAE,gBAAgB,EAAE,cAAc,EAAE,MAAM,gBAAgB,CAAC;AAElE,OAAO,EAAE,UAAU,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAEjE,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAoB,CAAC;AAElD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC"}

package/lib/scatter3d/ui/scatterCloudModel.d.ts

@@ -0,0 +1,60 @@
+/**
+ * What a cloud is made of before any of it is drawn: the shell around each
+ * group, and the sentence a screen reader is given instead of the picture.
+ *
+ * It is kept out of the component for the same reason the flat scatter's model
+ * is — a shell has to be cut before there is anything to project, and cutting
+ * it inside the render callback would cut it again on every turn.
+ */
+import type { EllipseSize } from '../../scatter/core/confidenceEllipse.ts';
+import type { ScatterGroupInk } from '../../scatter/ui/scatterPlotModel.ts';
+import type { ScatterGroup } from '../../scatter/ui/scatterPlotProps.ts';
+import type { Vector3 } from '../core/orbitCamera.ts';
+import type { CloudShell } from './CloudShellLayer.tsx';
+/** What {@link cloudShells} needs to fit one shell per group. */
+export interface CloudShellsInput {
+    /** Every sample, in cube units. */
+    cube: readonly Vector3[];
+    /** Which group each sample belongs to, as an index into `groups`. */
+    groupOf: ArrayLike<number>;
+    /** The groups, in the order they are coloured. */
+    groups: readonly ScatterGroup[];
+    /** The colour and the strength each group is drawn at. */
+    ink: ScatterGroupInk;
+    /** How large the shells are. */
+    size: EllipseSize;
+    /**
+     * How many samples a group needs before it is given a shell.
+     * @default 4
+     */
+    minimumPoints?: number;
+}
+/**
+ * One shell per group that has enough samples to have a shape.
+ *
+ * The shells are fitted in cube units rather than in the data's own, because
+ * the three axes were stretched to one cube and a shell fitted before that
+ * stretch would not sit on the cloud the reader is looking at. It is the same
+ * reasoning the map uses when it fits its outlines in pixels.
+ *
+ * A group the reader has switched off in the legend keeps its shell and loses
+ * its strength, so the shape it was making is still visible behind the groups
+ * that are left — which is the whole point of switching one off.
+ * @param input - See {@link CloudShellsInput}.
+ * @returns The shells, in group order. A group too small for a shape is left out rather than given a shell that describes its handful of samples.
+ */
+export declare function cloudShells(input: CloudShellsInput): CloudShell[];
+/**
+ * What a screen reader is told the figure shows.
+ *
+ * It names all three axes, because a reader who cannot see the box has no
+ * frame to read them off, and the frame is where a sighted reader learns which
+ * axis is which.
+ * @param xLabel - What the axis running left to right is called.
+ * @param yLabel - What the axis running bottom to top is called.
+ * @param zLabel - What the axis running away from the reader is called.
+ * @param count - How many samples there are.
+ * @returns The sentence.
+ */
+export declare function cloudLabel(xLabel: string, yLabel: string, zLabel: string, count: number): string;
+//# sourceMappingURL=scatterCloudModel.d.ts.map

package/lib/scatter3d/ui/scatterCloudModel.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"scatterCloudModel.d.ts","sourceRoot":"","sources":["../../../src/scatter3d/ui/scatterCloudModel.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAEH,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,yCAAyC,CAAC;AAC3E,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,sCAAsC,CAAC;AAC5E,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,sCAAsC,CAAC;AAEzE,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,wBAAwB,CAAC;AAEtD,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAC;AAExD,iEAAiE;AACjE,MAAM,WAAW,gBAAgB;IAC/B,mCAAmC;IACnC,IAAI,EAAE,SAAS,OAAO,EAAE,CAAC;IACzB,qEAAqE;IACrE,OAAO,EAAE,SAAS,CAAC,MAAM,CAAC,CAAC;IAC3B,kDAAkD;IAClD,MAAM,EAAE,SAAS,YAAY,EAAE,CAAC;IAChC,0DAA0D;IAC1D,GAAG,EAAE,eAAe,CAAC;IACrB,gCAAgC;IAChC,IAAI,EAAE,WAAW,CAAC;IAClB;;;OAGG;IACH,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED;;;;;;;;;;;;;GAaG;AACH,wBAAgB,WAAW,CAAC,KAAK,EAAE,gBAAgB,GAAG,UAAU,EAAE,CA0BjE;AAED;;;;;;;;;;;GAWG;AACH,wBAAgB,UAAU,CACxB,MAAM,EAAE,MAAM,EACd,MAAM,EAAE,MAAM,EACd,MAAM,EAAE,MAAM,EACd,KAAK,EAAE,MAAM,GACZ,MAAM,CAER"}

package/lib/scatter3d/ui/scatterCloudModel.js

@@ -0,0 +1,66 @@
+/**
+ * What a cloud is made of before any of it is drawn: the shell around each
+ * group, and the sentence a screen reader is given instead of the picture.
+ *
+ * It is kept out of the component for the same reason the flat scatter's model
+ * is — a shell has to be cut before there is anything to project, and cutting
+ * it inside the render callback would cut it again on every turn.
+ */
+import { confidenceEllipsoid } from "../core/confidenceEllipsoid.js";
+/**
+ * One shell per group that has enough samples to have a shape.
+ *
+ * The shells are fitted in cube units rather than in the data's own, because
+ * the three axes were stretched to one cube and a shell fitted before that
+ * stretch would not sit on the cloud the reader is looking at. It is the same
+ * reasoning the map uses when it fits its outlines in pixels.
+ *
+ * A group the reader has switched off in the legend keeps its shell and loses
+ * its strength, so the shape it was making is still visible behind the groups
+ * that are left — which is the whole point of switching one off.
+ * @param input - See {@link CloudShellsInput}.
+ * @returns The shells, in group order. A group too small for a shape is left out rather than given a shell that describes its handful of samples.
+ */
+export function cloudShells(input) {
+    const { cube, groupOf, groups, ink, size, minimumPoints } = input;
+    const held = groups.map(() => []);
+    const count = Math.min(cube.length, groupOf.length);
+    for (let index = 0; index < count; index++) {
+        const group = groupOf[index];
+        if (group === undefined || group < 0 || group >= groups.length)
+            continue;
+        held[group].push(cube[index]);
+    }
+    const shells = [];
+    for (const [group, entry] of groups.entries()) {
+        const ellipsoid = confidenceEllipsoid(held[group], {
+            size,
+            minimumPoints,
+        });
+        if (ellipsoid === null)
+            continue;
+        shells.push({
+            id: entry.id,
+            color: ink.colors[group] ?? entry.color,
+            ellipsoid,
+            opacity: ink.opacities[group] ?? 1,
+        });
+    }
+    return shells;
+}
+/**
+ * What a screen reader is told the figure shows.
+ *
+ * It names all three axes, because a reader who cannot see the box has no
+ * frame to read them off, and the frame is where a sighted reader learns which
+ * axis is which.
+ * @param xLabel - What the axis running left to right is called.
+ * @param yLabel - What the axis running bottom to top is called.
+ * @param zLabel - What the axis running away from the reader is called.
+ * @param count - How many samples there are.
+ * @returns The sentence.
+ */
+export function cloudLabel(xLabel, yLabel, zLabel, count) {
+    return `A three-dimensional scatter plot of ${count} samples: ${xLabel} across, ${yLabel} up, and ${zLabel} into the picture.`;
+}
+//# sourceMappingURL=scatterCloudModel.js.map

package/lib/scatter3d/ui/scatterCloudModel.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"scatterCloudModel.js","sourceRoot":"","sources":["../../../src/scatter3d/ui/scatterCloudModel.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAKH,OAAO,EAAE,mBAAmB,EAAE,MAAM,gCAAgC,CAAC;AAwBrE;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,WAAW,CAAC,KAAuB;IACjD,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,GAAG,EAAE,IAAI,EAAE,aAAa,EAAE,GAAG,KAAK,CAAC;IAElE,MAAM,IAAI,GAAgB,MAAM,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC;IAC/C,MAAM,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,MAAM,EAAE,OAAO,CAAC,MAAM,CAAC,CAAC;IACpD,KAAK,IAAI,KAAK,GAAG,CAAC,EAAE,KAAK,GAAG,KAAK,EAAE,KAAK,EAAE,EAAE,CAAC;QAC3C,MAAM,KAAK,GAAG,OAAO,CAAC,KAAK,CAAC,CAAC;QAC7B,IAAI,KAAK,KAAK,SAAS,IAAI,KAAK,GAAG,CAAC,IAAI,KAAK,IAAI,MAAM,CAAC,MAAM;YAAE,SAAS;QACxE,IAAI,CAAC,KAAK,CAAe,CAAC,IAAI,CAAC,IAAI,CAAC,KAAK,CAAY,CAAC,CAAC;IAC1D,CAAC;IAED,MAAM,MAAM,GAAiB,EAAE,CAAC;IAChC,KAAK,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,IAAI,MAAM,CAAC,OAAO,EAAE,EAAE,CAAC;QAC9C,MAAM,SAAS,GAAG,mBAAmB,CAAC,IAAI,CAAC,KAAK,CAAc,EAAE;YAC9D,IAAI;YACJ,aAAa;SACd,CAAC,CAAC;QACH,IAAI,SAAS,KAAK,IAAI;YAAE,SAAS;QACjC,MAAM,CAAC,IAAI,CAAC;YACV,EAAE,EAAE,KAAK,CAAC,EAAE;YACZ,KAAK,EAAE,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,KAAK,CAAC,KAAK;YACvC,SAAS;YACT,OAAO,EAAE,GAAG,CAAC,SAAS,CAAC,KAAK,CAAC,IAAI,CAAC;SACnC,CAAC,CAAC;IACL,CAAC;IACD,OAAO,MAAM,CAAC;AAChB,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,UAAU,CACxB,MAAc,EACd,MAAc,EACd,MAAc,EACd,KAAa;IAEb,OAAO,uCAAuC,KAAK,aAAa,MAAM,YAAY,MAAM,YAAY,MAAM,oBAAoB,CAAC;AACjI,CAAC"}