ocs-calculators 0.1.2 → 0.2.0

package/dist/pole-capacity/index.d.ts

@@ -0,0 +1,47 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const poleCapacityMeta: CalculatorMeta;
+
+/** GB/T 25020.1-2025 格构式钢支柱标称容量系列（表 A.2），kN·m */
+declare const STEEL_POLE_SERIES_KNM: readonly [150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 750, 900, 1050, 1200, 1500];
+/** 承载力检验弯矩 = 1.5 × 标称容量（25020.1 表 A.2 表值规律） */
+declare const TEST_MOMENT_FACTOR = 1.5;
+/** 支柱容量校核输入。单位：kN、m、mm、Pa。 */
+interface PoleCapacityInput {
+    /** 区段类型 */
+    readonly section: 'line' | 'curve';
+    /** 接触线张力 T_j，kN */
+    readonly contactWireTensionKN: number;
+    /** 承力索张力 T_c，kN */
+    readonly messengerTensionKN: number;
+    /** 拉出值 a，mm */
+    readonly staggerMM: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 曲线半径 R，m（曲线区段） */
+    readonly curveRadiusM?: number;
+    /** 水平力合力作用高度 h_e，m */
+    readonly resultantHeightM: number;
+    /** 设计最大风压 P，Pa */
+    readonly windPressurePa: number;
+    /** 支柱迎风宽度 b，m */
+    readonly poleWidthM: number;
+    /** 支柱高度 h，m */
+    readonly poleHeightM: number;
+    /** 线索风载 F_wl，N */
+    readonly wireWindLoadN?: number;
+}
+interface PoleCapacityResult {
+    /** 悬挂水平力 F_h，N */
+    readonly horizontalForceN: number;
+    /** 工作弯矩 M，kN·m */
+    readonly workMomentKNM: number;
+    /** 折合标称容量（÷1.5），kN·m */
+    readonly nominalNeedKNM: number;
+    /** 选型结果 */
+    readonly selection: string | null;
+}
+/** 支柱容量选型（容量比较法，TB/T 2286 5.9.2 检验弯矩口径；钢柱 25020.1 5.1.1+附录A） */
+declare function poleCapacityCheck(input: PoleCapacityInput): PoleCapacityResult;
+
+export { type PoleCapacityInput, type PoleCapacityResult, STEEL_POLE_SERIES_KNM, TEST_MOMENT_FACTOR, poleCapacityCheck, poleCapacityMeta };

package/dist/pole-capacity/index.js

@@ -0,0 +1,13 @@
+import {
+  STEEL_POLE_SERIES_KNM,
+  TEST_MOMENT_FACTOR,
+  poleCapacityCheck,
+  poleCapacityMeta
+} from "../chunk-VXVTT6WS.js";
+export {
+  STEEL_POLE_SERIES_KNM,
+  TEST_MOMENT_FACTOR,
+  poleCapacityCheck,
+  poleCapacityMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/pole-capacity/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/sag/index.cjs

@@ -0,0 +1,13 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+
+var _chunkPYNVEHGRcjs = require('../chunk-PYNVEHGR.cjs');
+
+
+
+
+
+exports.maxSpanFromSagM = _chunkPYNVEHGRcjs.maxSpanFromSagM; exports.sagMM = _chunkPYNVEHGRcjs.sagMM; exports.sagMeta = _chunkPYNVEHGRcjs.sagMeta; exports.tensionFromSagKN = _chunkPYNVEHGRcjs.tensionFromSagKN;
+//# sourceMappingURL=index.cjs.map

package/dist/sag/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/sag/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACA;AACF,iNAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/sag/index.cjs"}

package/dist/sag/index.d.cts

@@ -0,0 +1,21 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const sagMeta: CalculatorMeta;
+
+/** 弛度计算参数。单位：张力 kN、跨距 m、单位重 N/m。 */
+interface SagInput {
+    /** 接触线/承力索张力 T，kN */
+    readonly tensionKN: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 单位长度重量 g，N/m */
+    readonly weightNPerM: number;
+}
+/** 弛度 f = g·l²/(8T)，mm */
+declare function sagMM(input: SagInput): number;
+/** 反算张力：给定弛度求张力 T = g·l²/(8·f)，kN */
+declare function tensionFromSagKN(weightNPerM: number, spanM: number, sagMM: number): number;
+/** 反算最大跨距：给定张力与限值弛度 l_max = √(8·T·f_max/g)，m */
+declare function maxSpanFromSagM(weightNPerM: number, tensionKN: number, sagLimitMM: number): number;
+
+export { type SagInput, maxSpanFromSagM, sagMM, sagMeta, tensionFromSagKN };

package/dist/sag/index.d.ts

@@ -0,0 +1,21 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const sagMeta: CalculatorMeta;
+
+/** 弛度计算参数。单位：张力 kN、跨距 m、单位重 N/m。 */
+interface SagInput {
+    /** 接触线/承力索张力 T，kN */
+    readonly tensionKN: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 单位长度重量 g，N/m */
+    readonly weightNPerM: number;
+}
+/** 弛度 f = g·l²/(8T)，mm */
+declare function sagMM(input: SagInput): number;
+/** 反算张力：给定弛度求张力 T = g·l²/(8·f)，kN */
+declare function tensionFromSagKN(weightNPerM: number, spanM: number, sagMM: number): number;
+/** 反算最大跨距：给定张力与限值弛度 l_max = √(8·T·f_max/g)，m */
+declare function maxSpanFromSagM(weightNPerM: number, tensionKN: number, sagLimitMM: number): number;
+
+export { type SagInput, maxSpanFromSagM, sagMM, sagMeta, tensionFromSagKN };

package/dist/sag/index.js

@@ -0,0 +1,13 @@
+import {
+  maxSpanFromSagM,
+  sagMM,
+  sagMeta,
+  tensionFromSagKN
+} from "../chunk-C2XU3XKP.js";
+export {
+  maxSpanFromSagM,
+  sagMM,
+  sagMeta,
+  tensionFromSagKN
+};
+//# sourceMappingURL=index.js.map

package/dist/sag/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/steady-arm/index.cjs

@@ -0,0 +1,11 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+var _chunk57J7I6JAcjs = require('../chunk-57J7I6JA.cjs');
+
+
+
+
+exports.steadyArmAngleDeg = _chunk57J7I6JAcjs.steadyArmAngleDeg; exports.steadyArmCheck = _chunk57J7I6JAcjs.steadyArmCheck; exports.steadyArmMeta = _chunk57J7I6JAcjs.steadyArmMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/steady-arm/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/steady-arm/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACF,oLAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/steady-arm/index.cjs"}

package/dist/steady-arm/index.d.cts

@@ -0,0 +1,66 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const steadyArmMeta: CalculatorMeta;
+
+/** 定位器坡度校核的输入参数 */
+interface SteadyArmInput {
+    /** 接触线张力 T，kN */
+    readonly contactWireTensionKN: number;
+    /** 拉出值 a，mm（内部换算 m） */
+    readonly staggerMM: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 曲线半径 R，m。undefined 表示直线区段 */
+    readonly curveRadiusM?: number;
+    /** 第一吊弦距定位点距离 l₁，m */
+    readonly firstDropperOffsetM: number;
+    /** 接触线单位重 g_j，kN/m */
+    readonly wireWeightKNPerM: number;
+    /** 定位器自重 G_d，kN */
+    readonly regulatorSelfWeightKN: number;
+}
+/** 定位器受力与坡度角计算结果 */
+interface SteadyArmAngleResult {
+    /** 直线之字力 Fz，kN */
+    readonly staggerForceKN: number;
+    /** 曲线力 Fq，kN（直线区段为 0） */
+    readonly curveForceKN: number;
+    /** 水平合成力 Fs，kN（直线为 Fz；曲线为 |Fq − Fz|） */
+    readonly horizontalForceKN: number;
+    /** 垂直力 Fc，kN */
+    readonly verticalForceKN: number;
+    /** 坡度角 θ = atan(Fc/Fs)，度 */
+    readonly angleDeg: number;
+    /** 坡度比（垂直∶水平）= 1∶n，n = Fs/Fc */
+    readonly slopeRatio: number;
+    /** 是否为直线区段 */
+    readonly isStraight: boolean;
+}
+/** 定位器坡度校核结果 */
+interface SteadyArmCheckResult extends SteadyArmAngleResult {
+    /** 是否满足限值要求 */
+    readonly passes: boolean;
+    /** 判定理由 */
+    readonly reason: string;
+}
+/**
+ * 定位器坡度计算（纯函数）：
+ *   Fz = 4·T·a/l           （直线之字力，a 由 mm 换算 m）
+ *   Fq = T·l/R             （曲线力）
+ *   Fs = |Fq − Fz|         （曲线合成，直线时 Fs = Fz）
+ *   Fc = g_j·l₁ + G_d      （垂直力）
+ *   θ  = atan(Fc/Fs)       （坡度角，弧度转度）
+ *   n  = Fs/Fc             （坡度比 1∶n）
+ */
+declare function steadyArmAngleDeg(input: SteadyArmInput): SteadyArmAngleResult;
+/**
+ * 定位器坡度限值校核。
+ *
+ * 限值（300 km/h 及以上高铁期刊口径，罗健等《高速铁路接触网定位器坡度问题的深化研究》，
+ * 铁道工程学报 2013,30(1):76-80）：
+ *   - 直线区段：θ ≥ 8°
+ *   - 曲线区段：6° ≤ θ ≤ 16°
+ */
+declare function steadyArmCheck(input: SteadyArmInput): SteadyArmCheckResult;
+
+export { type SteadyArmAngleResult, type SteadyArmCheckResult, type SteadyArmInput, steadyArmAngleDeg, steadyArmCheck, steadyArmMeta };

package/dist/steady-arm/index.d.ts

@@ -0,0 +1,66 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const steadyArmMeta: CalculatorMeta;
+
+/** 定位器坡度校核的输入参数 */
+interface SteadyArmInput {
+    /** 接触线张力 T，kN */
+    readonly contactWireTensionKN: number;
+    /** 拉出值 a，mm（内部换算 m） */
+    readonly staggerMM: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 曲线半径 R，m。undefined 表示直线区段 */
+    readonly curveRadiusM?: number;
+    /** 第一吊弦距定位点距离 l₁，m */
+    readonly firstDropperOffsetM: number;
+    /** 接触线单位重 g_j，kN/m */
+    readonly wireWeightKNPerM: number;
+    /** 定位器自重 G_d，kN */
+    readonly regulatorSelfWeightKN: number;
+}
+/** 定位器受力与坡度角计算结果 */
+interface SteadyArmAngleResult {
+    /** 直线之字力 Fz，kN */
+    readonly staggerForceKN: number;
+    /** 曲线力 Fq，kN（直线区段为 0） */
+    readonly curveForceKN: number;
+    /** 水平合成力 Fs，kN（直线为 Fz；曲线为 |Fq − Fz|） */
+    readonly horizontalForceKN: number;
+    /** 垂直力 Fc，kN */
+    readonly verticalForceKN: number;
+    /** 坡度角 θ = atan(Fc/Fs)，度 */
+    readonly angleDeg: number;
+    /** 坡度比（垂直∶水平）= 1∶n，n = Fs/Fc */
+    readonly slopeRatio: number;
+    /** 是否为直线区段 */
+    readonly isStraight: boolean;
+}
+/** 定位器坡度校核结果 */
+interface SteadyArmCheckResult extends SteadyArmAngleResult {
+    /** 是否满足限值要求 */
+    readonly passes: boolean;
+    /** 判定理由 */
+    readonly reason: string;
+}
+/**
+ * 定位器坡度计算（纯函数）：
+ *   Fz = 4·T·a/l           （直线之字力，a 由 mm 换算 m）
+ *   Fq = T·l/R             （曲线力）
+ *   Fs = |Fq − Fz|         （曲线合成，直线时 Fs = Fz）
+ *   Fc = g_j·l₁ + G_d      （垂直力）
+ *   θ  = atan(Fc/Fs)       （坡度角，弧度转度）
+ *   n  = Fs/Fc             （坡度比 1∶n）
+ */
+declare function steadyArmAngleDeg(input: SteadyArmInput): SteadyArmAngleResult;
+/**
+ * 定位器坡度限值校核。
+ *
+ * 限值（300 km/h 及以上高铁期刊口径，罗健等《高速铁路接触网定位器坡度问题的深化研究》，
+ * 铁道工程学报 2013,30(1):76-80）：
+ *   - 直线区段：θ ≥ 8°
+ *   - 曲线区段：6° ≤ θ ≤ 16°
+ */
+declare function steadyArmCheck(input: SteadyArmInput): SteadyArmCheckResult;
+
+export { type SteadyArmAngleResult, type SteadyArmCheckResult, type SteadyArmInput, steadyArmAngleDeg, steadyArmCheck, steadyArmMeta };

package/dist/steady-arm/index.js

@@ -0,0 +1,11 @@
+import {
+  steadyArmAngleDeg,
+  steadyArmCheck,
+  steadyArmMeta
+} from "../chunk-TO46PTS3.js";
+export {
+  steadyArmAngleDeg,
+  steadyArmCheck,
+  steadyArmMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/steady-arm/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "ocs-calculators",
-  "version": "0.1.2",
+  "version": "0.2.0",
   "description": "铁路接触网（OCS）工程计算工具集 —— 张力、弛度、吊弦、风偏移等计算，零依赖纯函数实现 / Railway overhead contact system (OCS) engineering calculators as zero-dependency pure functions",
   "keywords": [
     "catenary",
@@ -87,7 +87,47 @@
       "import": "./dist/wear/index.js",
       "require": "./dist/wear/index.cjs"
     },
-    "./package.json": "./package.json"
+    "./package.json": "./package.json",
+    "steady-arm": {
+      "types": "./dist/steady-arm/index.d.ts",
+      "import": "./dist/steady-arm/index.js",
+      "require": "./dist/steady-arm/index.cjs"
+    },
+    "cross-span": {
+      "types": "./dist/cross-span/index.d.ts",
+      "import": "./dist/cross-span/index.js",
+      "require": "./dist/cross-span/index.cjs"
+    },
+    "bvalue": {
+      "types": "./dist/bvalue/index.d.ts",
+      "import": "./dist/bvalue/index.js",
+      "require": "./dist/bvalue/index.cjs"
+    },
+    "sag": {
+      "types": "./dist/sag/index.d.ts",
+      "import": "./dist/sag/index.js",
+      "require": "./dist/sag/index.cjs"
+    },
+    "anchor-length": {
+      "types": "./dist/anchor-length/index.d.ts",
+      "import": "./dist/anchor-length/index.js",
+      "require": "./dist/anchor-length/index.cjs"
+    },
+    "creepage": {
+      "types": "./dist/creepage/index.d.ts",
+      "import": "./dist/creepage/index.js",
+      "require": "./dist/creepage/index.cjs"
+    },
+    "pole-capacity": {
+      "types": "./dist/pole-capacity/index.d.ts",
+      "import": "./dist/pole-capacity/index.js",
+      "require": "./dist/pole-capacity/index.cjs"
+    },
+    "cantilever": {
+      "types": "./dist/cantilever/index.d.ts",
+      "import": "./dist/cantilever/index.js",
+      "require": "./dist/cantilever/index.cjs"
+    }
   },
   "files": [
     "dist",
@@ -121,4 +161,4 @@
     "url": "https://github.com/showhoo/ocs-calculators/issues"
   },
   "author": "思维接触网百科"
-}
+}

package/dist/chunk-CVA4EH2K.js.map

@@ -1 +0,0 @@
-{"version":3,"sources":["../src/copper/meta.ts","../src/copper/index.ts"],"sourcesContent":["import type { CalculatorMeta } from '../types';\n\nexport const copperMeta: CalculatorMeta = {\n  name: '接触线参数速查',\n  nameEn: 'Contact Wire Parameter Lookup',\n  summary:\n    '内置 CTHM / CTHA / CTHS 系列 120/150 mm² 接触线参数表，按长度与环境温度给出总重量与温度修正电阻。',\n  formula: [\n    '电阻温度修正（α = 0.00393 /℃）：r_T = r₂₀·[1 + α·(T − 20)]',\n    '总重量：W = w₀ × l（w₀ 单位重量 kg/km，l 长度 km）',\n  ],\n  references: [\n    '内置参数表来源 TB/T 2809-2017《电气化铁路用铜及铜合金接触线》（2018-05-01 实施）',\n    '单位重量为标称值',\n    '载流量为 150℃ 持续值，室内/室外双口径按标准表5',\n    'r₂₀ 除 CTHM-120 取给定值外，均按导电率反算估算（IACS 标准电阻率 0.017241 Ω·mm²/m ÷ 导电率 ÷ 截面积；0.017241 = 1/58）',\n    '正式工程以产品标准与出厂检验单为准',\n  ],\n  scope: [\n    '温度修正仅覆盖电阻，未修正单位重量与载流量',\n    '适用温度 −40 ~ 90 ℃',\n    '载流量为 150℃ 允许温度下的持续值，未做环境温度修正',\n  ],\n  disclaimer: '本工具结果仅供参考，工程应用以设计文件为准。详见 DISCLAIMER.md。',\n  online: 'https://www.itswe.com/calculator/copper/',\n};\n","export { copperMeta } from './meta';\n\n// 电阻温度修正与铜常数统一放在 src/common/resistance.ts（copper 与 voltage-drop 共用），\n// 由根 index 统一导出，此处仅内部引用，避免重复导出同名符号。\nimport { resistanceAtTempOhmPerKm } from '../common/resistance';\n\n/** 站点计算器内置的 6 个型号 */\nexport type CopperWireModel =\n  | 'CTHM-120'\n  | 'CTHM-150'\n  | 'CTHA-120'\n  | 'CTHA-150'\n  | 'CTHS-120'\n  | 'CTHS-150';\n\nexport interface WireParamEntry {\n  /** 单位重量，kg/km（标称值） */\n  readonly unitWeightKgPerKm: number;\n  /** 20℃ 直流电阻，Ω/km */\n  readonly r20OhmPerKm: number;\n  /** 150℃ 持续载流量，室内口径，A */\n  readonly ampacityIndoor150A: number;\n  /** 150℃ 持续载流量，室外口径，A */\n  readonly ampacityOutdoor150A: number;\n  /** 口径说明：本行实际对应标准中的哪一行 */\n  readonly note: string;\n}\n\n/**\n * 接触线参数表，来源 TB/T 2809-2017。\n *\n * 载流量为 150℃ 持续值（室内/室外双口径，标准表5）。\n *\n * 已与站点 `/calculator/assets/calc-core.js` 中的 COPPER_TABLE 逐项比对，\n * 6 个型号 × 4 项参数完全一致。\n *\n * 注：站点曾因显示层 `fmt()` 的尾零剥离正则把载流量渲染成 43/56（应为 430/560），\n * 已于 R38 之后修复。若再遇渲染值与本表不符，先确认是否为显示层问题：\n * 本表与服务端数据源始终一致。\n *\n * ⚠️ 注意型号口径：CTHM / CTHA / CTHS 是站点计算器的型号代码，与标准中的\n * CTMH / CTA / CTS 并非同名对应。`note` 字段说明各行实际取自标准的哪一行，\n * 交叉引用 TB/T 2809-2017 时请以 note 为准。\n */\nexport const TB2809_WIRE_PARAMS: Record<CopperWireModel, WireParamEntry> = {\n  'CTHM-120': {\n    unitWeightKgPerKm: 1082,\n    r20OhmPerKm: 0.2113,\n    ampacityIndoor150A: 430,\n    ampacityOutdoor150A: 560,\n    note: '取标准 CTMH 行（高强度铜镁合金），ρ 按标准上限 0.02535 计算',\n  },\n  'CTHM-150': {\n    unitWeightKgPerKm: 1350,\n    r20OhmPerKm: 0.169,\n    ampacityIndoor150A: 500,\n    ampacityOutdoor150A: 650,\n    note: '取标准 CTMH 行（高强度铜镁合金）',\n  },\n  'CTHA-120': {\n    unitWeightKgPerKm: 1070,\n    r20OhmPerKm: 0.1481,\n    ampacityIndoor150A: 515,\n    ampacityOutdoor150A: 680,\n    note: '取标准 CTA 行（铜银合金），ρ ≤ 0.01777',\n  },\n  'CTHA-150': {\n    unitWeightKgPerKm: 1330,\n    r20OhmPerKm: 0.1185,\n    ampacityIndoor150A: 620,\n    ampacityOutdoor150A: 785,\n    note: '取标准 CTA 行（铜银合金）',\n  },\n  'CTHS-120': {\n    unitWeightKgPerKm: 1080,\n    r20OhmPerKm: 0.1916,\n    ampacityIndoor150A: 515,\n    ampacityOutdoor150A: 680,\n    note: '取标准 CTS 行（铜锡合金），载流量按 CTS 行取值',\n  },\n  'CTHS-150': {\n    unitWeightKgPerKm: 1345,\n    r20OhmPerKm: 0.1533,\n    ampacityIndoor150A: 620,\n    ampacityOutdoor150A: 790,\n    note: '取标准 CTS 行（铜锡合金），载流量按 CTS 行取值',\n  },\n};\n\nexport interface CopperLookupInput {\n  readonly model: CopperWireModel;\n  /** 长度 l，km */\n  readonly lengthKm: number;\n  /** 环境温度 T，℃ */\n  readonly ambientTempDegC: number;\n}\n\nexport interface CopperLookupResult extends WireParamEntry {\n  readonly model: CopperWireModel;\n  /** 总重量 W = w₀ × l，kg */\n  readonly totalWeightKg: number;\n  /** 温度修正电阻 r_T，Ω/km */\n  readonly rTOhmPerKm: number;\n  /** 全长温度修正电阻，Ω */\n  readonly totalResistanceOhm: number;\n}\n\n/**\n * 按型号、长度与环境温度给出接触线参数速查结果。\n */\nexport function wireLookup(input: CopperLookupInput): CopperLookupResult {\n  const { model, lengthKm, ambientTempDegC } = input;\n\n  const params = TB2809_WIRE_PARAMS[model];\n  if (params === undefined) {\n    throw new RangeError(`未知型号：${model}`);\n  }\n  if (!(lengthKm > 0)) {\n    throw new RangeError(`长度必须为正数，收到 ${lengthKm} km`);\n  }\n  if (ambientTempDegC < -40 || ambientTempDegC > 90) {\n    throw new RangeError(`适用温度为 −40 ~ 90 ℃，收到 ${ambientTempDegC} ℃`);\n  }\n\n  const rT = resistanceAtTempOhmPerKm(params.r20OhmPerKm, ambientTempDegC);\n\n  return {\n    model,\n    ...params,\n    totalWeightKg: params.unitWeightKgPerKm * lengthKm,\n    rTOhmPerKm: rT,\n    totalResistanceOhm: rT * lengthKm,\n  };\n}\n"],"mappings":";;;;;AAEO,IAAM,aAA6B;AAAA,EACxC,MAAM;AAAA,EACN,QAAQ;AAAA,EACR,SACE;AAAA,EACF,SAAS;AAAA,IACP;AAAA,IACA;AAAA,EACF;AAAA,EACA,YAAY;AAAA,IACV;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,EACF;AAAA,EACA,OAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AAAA,EACA,YAAY;AAAA,EACZ,QAAQ;AACV;;;ACmBO,IAAM,qBAA8D;AAAA,EACzE,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AAAA,EACA,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AAAA,EACA,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AAAA,EACA,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AAAA,EACA,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AAAA,EACA,YAAY;AAAA,IACV,mBAAmB;AAAA,IACnB,aAAa;AAAA,IACb,oBAAoB;AAAA,IACpB,qBAAqB;AAAA,IACrB,MAAM;AAAA,EACR;AACF;AAuBO,SAAS,WAAW,OAA8C;AACvE,QAAM,EAAE,OAAO,UAAU,gBAAgB,IAAI;AAE7C,QAAM,SAAS,mBAAmB,KAAK;AACvC,MAAI,WAAW,QAAW;AACxB,UAAM,IAAI,WAAW,iCAAQ,KAAK,EAAE;AAAA,EACtC;AACA,MAAI,EAAE,WAAW,IAAI;AACnB,UAAM,IAAI,WAAW,gEAAc,QAAQ,KAAK;AAAA,EAClD;AACA,MAAI,kBAAkB,OAAO,kBAAkB,IAAI;AACjD,UAAM,IAAI,WAAW,yEAAuB,eAAe,SAAI;AAAA,EACjE;AAEA,QAAM,KAAK,yBAAyB,OAAO,aAAa,eAAe;AAEvE,SAAO;AAAA,IACL;AAAA,IACA,GAAG;AAAA,IACH,eAAe,OAAO,oBAAoB;AAAA,IAC1C,YAAY;AAAA,IACZ,oBAAoB,KAAK;AAAA,EAC3B;AACF;","names":[]}

package/dist/chunk-MZBQ4546.cjs.map

@@ -1 +0,0 @@
-{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/chunk-MZBQ4546.cjs","../src/copper/meta.ts","../src/copper/index.ts"],"names":[],"mappings":"AAAA;AACE;AACF,wDAA6B;AAC7B;AACA;ACFO,IAAM,WAAA,EAA6B;AAAA,EACxC,IAAA,EAAM,4CAAA;AAAA,EACN,MAAA,EAAQ,+BAAA;AAAA,EACR,OAAA,EACE,sOAAA;AAAA,EACF,OAAA,EAAS;AAAA,IACP,oIAAA;AAAA,IACA;AAAA,EACF,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,8LAAA;AAAA,IACA,kDAAA;AAAA,IACA,iIAAA;AAAA,IACA,0QAAA;AAAA,IACA;AAAA,EACF,CAAA;AAAA,EACA,KAAA,EAAO;AAAA,IACL,gIAAA;AAAA,IACA,+CAAA;AAAA,IACA;AAAA,EACF,CAAA;AAAA,EACA,UAAA,EAAY,sKAAA;AAAA,EACZ,MAAA,EAAQ;AACV,CAAA;ADGA;AACA;AEeO,IAAM,mBAAA,EAA8D;AAAA,EACzE,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,MAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,KAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,MAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,MAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,MAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,iBAAA,EAAmB,IAAA;AAAA,IACnB,WAAA,EAAa,MAAA;AAAA,IACb,kBAAA,EAAoB,GAAA;AAAA,IACpB,mBAAA,EAAqB,GAAA;AAAA,IACrB,IAAA,EAAM;AAAA,EACR;AACF,CAAA;AAuBO,SAAS,UAAA,CAAW,KAAA,EAA8C;AACvE,EAAA,MAAM,EAAE,KAAA,EAAO,QAAA,EAAU,gBAAgB,EAAA,EAAI,KAAA;AAE7C,EAAA,MAAM,OAAA,EAAS,kBAAA,CAAmB,KAAK,CAAA;AACvC,EAAA,GAAA,CAAI,OAAA,IAAW,KAAA,CAAA,EAAW;AACxB,IAAA,MAAM,IAAI,UAAA,CAAW,CAAA,8BAAA,EAAQ,KAAK,CAAA,CAAA;AACpC,EAAA;AACqB,EAAA;AACE,IAAA;AACvB,EAAA;AACmD,EAAA;AAC5B,IAAA;AACvB,EAAA;AAEwD,EAAA;AAEjD,EAAA;AACL,IAAA;AACG,IAAA;AACuC,IAAA;AAC9B,IAAA;AACa,IAAA;AAC3B,EAAA;AACF;AFtCgE;AACA;AACA;AACA;AACA;AACA","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/chunk-MZBQ4546.cjs","sourcesContent":[null,"import type { CalculatorMeta } from '../types';\n\nexport const copperMeta: CalculatorMeta = {\n  name: '接触线参数速查',\n  nameEn: 'Contact Wire Parameter Lookup',\n  summary:\n    '内置 CTHM / CTHA / CTHS 系列 120/150 mm² 接触线参数表，按长度与环境温度给出总重量与温度修正电阻。',\n  formula: [\n    '电阻温度修正（α = 0.00393 /℃）：r_T = r₂₀·[1 + α·(T − 20)]',\n    '总重量：W = w₀ × l（w₀ 单位重量 kg/km，l 长度 km）',\n  ],\n  references: [\n    '内置参数表来源 TB/T 2809-2017《电气化铁路用铜及铜合金接触线》（2018-05-01 实施）',\n    '单位重量为标称值',\n    '载流量为 150℃ 持续值，室内/室外双口径按标准表5',\n    'r₂₀ 除 CTHM-120 取给定值外，均按导电率反算估算（IACS 标准电阻率 0.017241 Ω·mm²/m ÷ 导电率 ÷ 截面积；0.017241 = 1/58）',\n    '正式工程以产品标准与出厂检验单为准',\n  ],\n  scope: [\n    '温度修正仅覆盖电阻，未修正单位重量与载流量',\n    '适用温度 −40 ~ 90 ℃',\n    '载流量为 150℃ 允许温度下的持续值，未做环境温度修正',\n  ],\n  disclaimer: '本工具结果仅供参考，工程应用以设计文件为准。详见 DISCLAIMER.md。',\n  online: 'https://www.itswe.com/calculator/copper/',\n};\n","export { copperMeta } from './meta';\n\n// 电阻温度修正与铜常数统一放在 src/common/resistance.ts（copper 与 voltage-drop 共用），\n// 由根 index 统一导出，此处仅内部引用，避免重复导出同名符号。\nimport { resistanceAtTempOhmPerKm } from '../common/resistance';\n\n/** 站点计算器内置的 6 个型号 */\nexport type CopperWireModel =\n  | 'CTHM-120'\n  | 'CTHM-150'\n  | 'CTHA-120'\n  | 'CTHA-150'\n  | 'CTHS-120'\n  | 'CTHS-150';\n\nexport interface WireParamEntry {\n  /** 单位重量，kg/km（标称值） */\n  readonly unitWeightKgPerKm: number;\n  /** 20℃ 直流电阻，Ω/km */\n  readonly r20OhmPerKm: number;\n  /** 150℃ 持续载流量，室内口径，A */\n  readonly ampacityIndoor150A: number;\n  /** 150℃ 持续载流量，室外口径，A */\n  readonly ampacityOutdoor150A: number;\n  /** 口径说明：本行实际对应标准中的哪一行 */\n  readonly note: string;\n}\n\n/**\n * 接触线参数表，来源 TB/T 2809-2017。\n *\n * 载流量为 150℃ 持续值（室内/室外双口径，标准表5）。\n *\n * 已与站点 `/calculator/assets/calc-core.js` 中的 COPPER_TABLE 逐项比对，\n * 6 个型号 × 4 项参数完全一致。\n *\n * 注：站点曾因显示层 `fmt()` 的尾零剥离正则把载流量渲染成 43/56（应为 430/560），\n * 已于 R38 之后修复。若再遇渲染值与本表不符，先确认是否为显示层问题：\n * 本表与服务端数据源始终一致。\n *\n * ⚠️ 注意型号口径：CTHM / CTHA / CTHS 是站点计算器的型号代码，与标准中的\n * CTMH / CTA / CTS 并非同名对应。`note` 字段说明各行实际取自标准的哪一行，\n * 交叉引用 TB/T 2809-2017 时请以 note 为准。\n */\nexport const TB2809_WIRE_PARAMS: Record<CopperWireModel, WireParamEntry> = {\n  'CTHM-120': {\n    unitWeightKgPerKm: 1082,\n    r20OhmPerKm: 0.2113,\n    ampacityIndoor150A: 430,\n    ampacityOutdoor150A: 560,\n    note: '取标准 CTMH 行（高强度铜镁合金），ρ 按标准上限 0.02535 计算',\n  },\n  'CTHM-150': {\n    unitWeightKgPerKm: 1350,\n    r20OhmPerKm: 0.169,\n    ampacityIndoor150A: 500,\n    ampacityOutdoor150A: 650,\n    note: '取标准 CTMH 行（高强度铜镁合金）',\n  },\n  'CTHA-120': {\n    unitWeightKgPerKm: 1070,\n    r20OhmPerKm: 0.1481,\n    ampacityIndoor150A: 515,\n    ampacityOutdoor150A: 680,\n    note: '取标准 CTA 行（铜银合金），ρ ≤ 0.01777',\n  },\n  'CTHA-150': {\n    unitWeightKgPerKm: 1330,\n    r20OhmPerKm: 0.1185,\n    ampacityIndoor150A: 620,\n    ampacityOutdoor150A: 785,\n    note: '取标准 CTA 行（铜银合金）',\n  },\n  'CTHS-120': {\n    unitWeightKgPerKm: 1080,\n    r20OhmPerKm: 0.1916,\n    ampacityIndoor150A: 515,\n    ampacityOutdoor150A: 680,\n    note: '取标准 CTS 行（铜锡合金），载流量按 CTS 行取值',\n  },\n  'CTHS-150': {\n    unitWeightKgPerKm: 1345,\n    r20OhmPerKm: 0.1533,\n    ampacityIndoor150A: 620,\n    ampacityOutdoor150A: 790,\n    note: '取标准 CTS 行（铜锡合金），载流量按 CTS 行取值',\n  },\n};\n\nexport interface CopperLookupInput {\n  readonly model: CopperWireModel;\n  /** 长度 l，km */\n  readonly lengthKm: number;\n  /** 环境温度 T，℃ */\n  readonly ambientTempDegC: number;\n}\n\nexport interface CopperLookupResult extends WireParamEntry {\n  readonly model: CopperWireModel;\n  /** 总重量 W = w₀ × l，kg */\n  readonly totalWeightKg: number;\n  /** 温度修正电阻 r_T，Ω/km */\n  readonly rTOhmPerKm: number;\n  /** 全长温度修正电阻，Ω */\n  readonly totalResistanceOhm: number;\n}\n\n/**\n * 按型号、长度与环境温度给出接触线参数速查结果。\n */\nexport function wireLookup(input: CopperLookupInput): CopperLookupResult {\n  const { model, lengthKm, ambientTempDegC } = input;\n\n  const params = TB2809_WIRE_PARAMS[model];\n  if (params === undefined) {\n    throw new RangeError(`未知型号：${model}`);\n  }\n  if (!(lengthKm > 0)) {\n    throw new RangeError(`长度必须为正数，收到 ${lengthKm} km`);\n  }\n  if (ambientTempDegC < -40 || ambientTempDegC > 90) {\n    throw new RangeError(`适用温度为 −40 ~ 90 ℃，收到 ${ambientTempDegC} ℃`);\n  }\n\n  const rT = resistanceAtTempOhmPerKm(params.r20OhmPerKm, ambientTempDegC);\n\n  return {\n    model,\n    ...params,\n    totalWeightKg: params.unitWeightKgPerKm * lengthKm,\n    rTOhmPerKm: rT,\n    totalResistanceOhm: rT * lengthKm,\n  };\n}\n"]}