ocs-calculators 0.1.2 → 0.2.0

package/dist/index.cjs

@@ -40,47 +40,46 @@ var _chunkFVESJBUDcjs = require('./chunk-FVESJBUD.cjs');
 
 
 
-var _chunkNBFOB2PIcjs = require('./chunk-NBFOB2PI.cjs');
+var _chunk4UU7WA7Ncjs = require('./chunk-4UU7WA7N.cjs');
 
 
 
 
-var _chunkMZBQ4546cjs = require('./chunk-MZBQ4546.cjs');
 
 
+var _chunkJ2UXRMTUcjs = require('./chunk-J2UXRMTU.cjs');
 
 
-var _chunkDGO2DCO5cjs = require('./chunk-DGO2DCO5.cjs');
 
 
 
 
 
+var _chunkRPKDEFSJcjs = require('./chunk-RPKDEFSJ.cjs');
 
 
-var _chunk4UU7WA7Ncjs = require('./chunk-4UU7WA7N.cjs');
 
 
 
 
+var _chunkP6KUGPHDcjs = require('./chunk-P6KUGPHD.cjs');
 
 
-var _chunkJ2UXRMTUcjs = require('./chunk-J2UXRMTU.cjs');
 
 
 
+var _chunk4344WWAFcjs = require('./chunk-4344WWAF.cjs');
 
 
 
 
-var _chunkRPKDEFSJcjs = require('./chunk-RPKDEFSJ.cjs');
 
+var _chunkPYNVEHGRcjs = require('./chunk-PYNVEHGR.cjs');
 
 
 
 
-
-var _chunkP6KUGPHDcjs = require('./chunk-P6KUGPHD.cjs');
+var _chunk57J7I6JAcjs = require('./chunk-57J7I6JA.cjs');
 
 
 
@@ -91,6 +90,49 @@ var _chunkP6KUGPHDcjs = require('./chunk-P6KUGPHD.cjs');
 
 var _chunk5Q6IASB2cjs = require('./chunk-5Q6IASB2.cjs');
 
+
+
+
+
+
+
+var _chunkNBFOB2PIcjs = require('./chunk-NBFOB2PI.cjs');
+
+
+
+
+var _chunkCSLI5HEJcjs = require('./chunk-CSLI5HEJ.cjs');
+
+
+
+var _chunkHXALVJ4Gcjs = require('./chunk-HXALVJ4G.cjs');
+
+
+
+
+var _chunkWGTOBRYVcjs = require('./chunk-WGTOBRYV.cjs');
+
+
+
+
+var _chunkMTAYG3U2cjs = require('./chunk-MTAYG3U2.cjs');
+
+
+
+
+var _chunkDGO2DCO5cjs = require('./chunk-DGO2DCO5.cjs');
+
+
+
+
+
+
+var _chunkLBGUOTCJcjs = require('./chunk-LBGUOTCJ.cjs');
+
+
+
+var _chunkX25CXRVEcjs = require('./chunk-X25CXRVE.cjs');
+
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
 var STANDARD_UNIT_WEIGHT_KG_PER_KM = {
@@ -108,8 +150,8 @@ var COPPER_ALLOY_ALPHA_PER_DEG_C = 17e-6;
 var WIRE_PRESETS = [
   {
     id: "cthm120",
-    name: "CTHM-120\uFF08\u94DC\u9541 120\uFF09",
-    nameEn: "CTHM-120 (CuMg 120 mm\xB2)",
+    name: "CTMH-120\uFF08\u94DC\u9541 120\uFF09",
+    nameEn: "CTMH-120 (CuMg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
     elasticModulusGPa: 120,
@@ -118,8 +160,8 @@ var WIRE_PRESETS = [
   },
   {
     id: "cthm150",
-    name: "CTHM-150\uFF08\u94DC\u9541 150\uFF09",
-    nameEn: "CTHM-150 (CuMg 150 mm\xB2)",
+    name: "CTMH-150\uFF08\u94DC\u9541 150\uFF09",
+    nameEn: "CTMH-150 (CuMg 150 mm\xB2)",
     crossSectionMM2: 150,
     calculatedSectionMM2: 151,
     elasticModulusGPa: 120,
@@ -128,8 +170,8 @@ var WIRE_PRESETS = [
   },
   {
     id: "ctha120",
-    name: "CTHA-120\uFF08\u94DC\u94F6 120\uFF09",
-    nameEn: "CTHA-120 (CuAg 120 mm\xB2)",
+    name: "CTAH-120\uFF08\u94DC\u94F6 120\uFF09",
+    nameEn: "CTAH-120 (CuAg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
     elasticModulusGPa: 120,
@@ -265,5 +307,31 @@ function findAmpacityA(params) {
 
 
 
-exports.AIR_DENSITY_KG_PER_M3 = _chunkFVESJBUDcjs.AIR_DENSITY_KG_PER_M3; exports.CONVENTIONAL_MARGIN_MM = _chunk5Q6IASB2cjs.CONVENTIONAL_MARGIN_MM; exports.COPPER_ALLOY_ALPHA_PER_DEG_C = COPPER_ALLOY_ALPHA_PER_DEG_C; exports.COPPER_ALPHA_PER_DEG_C = _chunkDGO2DCO5cjs.COPPER_ALPHA_PER_DEG_C; exports.DEFAULT_BASE_AMBIENT_TEMP_DEG_C = _chunkNBFOB2PIcjs.DEFAULT_BASE_AMBIENT_TEMP_DEG_C; exports.DEFAULT_ICE_DENSITY_KG_PER_M3 = _chunkP6KUGPHDcjs.DEFAULT_ICE_DENSITY_KG_PER_M3; exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkRVP3IU2Lcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.DEFAULT_PANTOGRAPH_HEIGHT_M = _chunk4UU7WA7Ncjs.DEFAULT_PANTOGRAPH_HEIGHT_M; exports.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = _chunk5INEDXRYcjs.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT; exports.DEFAULT_WARN_THRESHOLD = _chunkNBHEOJ5Acjs.DEFAULT_WARN_THRESHOLD; exports.G0 = _chunkP6KUGPHDcjs.G0; exports.IACS_RESISTIVITY_OHM_MM2_PER_M = _chunkDGO2DCO5cjs.IACS_RESISTIVITY_OHM_MM2_PER_M; exports.MIN_MARGIN_MM = _chunk5Q6IASB2cjs.MIN_MARGIN_MM; exports.REFERENCE_DENSITY_G_PER_CM3 = REFERENCE_DENSITY_G_PER_CM3; exports.REF_TARGET_COEFF = _chunkRPKDEFSJcjs.REF_TARGET_COEFF; exports.REF_TARGET_OFFSET_N = _chunkRPKDEFSJcjs.REF_TARGET_OFFSET_N; exports.STANDARD_GAUGE_M = _chunk4UU7WA7Ncjs.STANDARD_GAUGE_M; exports.STANDARD_UNIT_WEIGHT_KG_PER_KM = STANDARD_UNIT_WEIGHT_KG_PER_KM; exports.TB2809_AMPACITY_A = TB2809_AMPACITY_A; exports.TB2809_WIRE_PARAMS = _chunkMZBQ4546cjs.TB2809_WIRE_PARAMS; exports.TRANSMISSION_RATIOS = _chunk5Q6IASB2cjs.TRANSMISSION_RATIOS; exports.WIRE_PRESETS = WIRE_PRESETS; exports.ampacityDeratingFactor = _chunkNBFOB2PIcjs.ampacityDeratingFactor; exports.ampacityMeta = _chunkNBFOB2PIcjs.ampacityMeta; exports.assessContactForce = _chunkRPKDEFSJcjs.assessContactForce; exports.cantShiftM = _chunk4UU7WA7Ncjs.cantShiftM; exports.copperMeta = _chunkMZBQ4546cjs.copperMeta; exports.curveStaggerCheck = _chunk4UU7WA7Ncjs.curveStaggerCheck; exports.curveStaggerMeta = _chunk4UU7WA7Ncjs.curveStaggerMeta; exports.deratedAmpacityA = _chunkNBFOB2PIcjs.deratedAmpacityA; exports.deriveLinearMassKgPerM = deriveLinearMassKgPerM; exports.dropperLengths = _chunkJ2UXRMTUcjs.dropperLengths; exports.dropperMeta = _chunkJ2UXRMTUcjs.dropperMeta; exports.dropperPositionsM = _chunkJ2UXRMTUcjs.dropperPositionsM; exports.elongationMM = _chunk5Q6IASB2cjs.elongationMM; exports.equivalentSpanM = _chunk3ERFRRHZcjs.equivalentSpanM; exports.findAmpacityA = findAmpacityA; exports.findWirePreset = findWirePreset; exports.forceMeta = _chunkRPKDEFSJcjs.forceMeta; exports.iceLoadNPerM = _chunkP6KUGPHDcjs.iceLoadNPerM; exports.icingCheck = _chunkP6KUGPHDcjs.icingCheck; exports.icingMeta = _chunkP6KUGPHDcjs.icingMeta; exports.kmHToMPerS = _chunkNBHEOJ5Acjs.kmHToMPerS; exports.maxParabolaSagM = _chunkJ2UXRMTUcjs.maxParabolaSagM; exports.naturalFrequencyHz = _chunkNBHEOJ5Acjs.naturalFrequencyHz; exports.parabolaSagM = _chunkJ2UXRMTUcjs.parabolaSagM; exports.referenceTargetForceN = _chunkRPKDEFSJcjs.referenceTargetForceN; exports.requiredStrokeMM = _chunk5Q6IASB2cjs.requiredStrokeMM; exports.resistanceAtTempOhmPerKm = _chunkDGO2DCO5cjs.resistanceAtTempOhmPerKm; exports.sagM = _chunk3ERFRRHZcjs.sagM; exports.sectionFromDiameterMM2 = _chunk5INEDXRYcjs.sectionFromDiameterMM2; exports.shortCircuitCheck = _chunkNBFOB2PIcjs.shortCircuitCheck; exports.shortCircuitMinSectionMM2 = _chunkNBFOB2PIcjs.shortCircuitMinSectionMM2; exports.solveTensionN = _chunk3ERFRRHZcjs.solveTensionN; exports.stateCoefficientK = _chunk3ERFRRHZcjs.stateCoefficientK; exports.statisticalForcesN = _chunkRPKDEFSJcjs.statisticalForcesN; exports.strokeCheck = _chunk5Q6IASB2cjs.strokeCheck; exports.strokeMeta = _chunk5Q6IASB2cjs.strokeMeta; exports.tensionAt = _chunk3ERFRRHZcjs.tensionAt; exports.tensionCurve = _chunk3ERFRRHZcjs.tensionCurve; exports.tensionMeta = _chunk3ERFRRHZcjs.tensionMeta; exports.unitWeightToKgPerM = unitWeightToKgPerM; exports.versineM = _chunk4UU7WA7Ncjs.versineM; exports.voltageDropCheck = _chunkRVP3IU2Lcjs.voltageDropCheck; exports.voltageDropMeta = _chunkRVP3IU2Lcjs.voltageDropMeta; exports.wavePropagationSpeedMPerS = _chunkNBHEOJ5Acjs.wavePropagationSpeedMPerS; exports.waveSpeedCheck = _chunkNBHEOJ5Acjs.waveSpeedCheck; exports.wavespeedMeta = _chunkNBHEOJ5Acjs.wavespeedMeta; exports.wearMeta = _chunk5INEDXRYcjs.wearMeta; exports.wearRatio = _chunk5INEDXRYcjs.wearRatio; exports.weightOfPresetNPerM = weightOfPresetNPerM; exports.weightPerLengthNPerM = weightPerLengthNPerM; exports.windClearanceCheck = _chunkFVESJBUDcjs.windClearanceCheck; exports.windDeflectionM = _chunkFVESJBUDcjs.windDeflectionM; exports.windLoadNPerM = _chunkFVESJBUDcjs.windLoadNPerM; exports.windMeta = _chunkFVESJBUDcjs.windMeta; exports.wireLookup = _chunkMZBQ4546cjs.wireLookup;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+exports.AIR_DENSITY_KG_PER_M3 = _chunkFVESJBUDcjs.AIR_DENSITY_KG_PER_M3; exports.ASSEMBLY_TOLERANCE_MM = _chunkWGTOBRYVcjs.ASSEMBLY_TOLERANCE_MM; exports.CONVENTIONAL_MARGIN_MM = _chunk5Q6IASB2cjs.CONVENTIONAL_MARGIN_MM; exports.COPPER_ALLOY_ALPHA_PER_DEG_C = COPPER_ALLOY_ALPHA_PER_DEG_C; exports.COPPER_ALPHA_PER_DEG_C = _chunkDGO2DCO5cjs.COPPER_ALPHA_PER_DEG_C; exports.CREEPAGE_FLOOR_GENERAL = _chunkLBGUOTCJcjs.CREEPAGE_FLOOR_GENERAL; exports.CREEPAGE_FLOOR_VCUT = _chunkLBGUOTCJcjs.CREEPAGE_FLOOR_VCUT; exports.DEFAULT_BASE_AMBIENT_TEMP_DEG_C = _chunkNBFOB2PIcjs.DEFAULT_BASE_AMBIENT_TEMP_DEG_C; exports.DEFAULT_ICE_DENSITY_KG_PER_M3 = _chunkP6KUGPHDcjs.DEFAULT_ICE_DENSITY_KG_PER_M3; exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkRVP3IU2Lcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.DEFAULT_PANTOGRAPH_HEIGHT_M = _chunk4UU7WA7Ncjs.DEFAULT_PANTOGRAPH_HEIGHT_M; exports.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = _chunk5INEDXRYcjs.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT; exports.DEFAULT_WARN_THRESHOLD = _chunkNBHEOJ5Acjs.DEFAULT_WARN_THRESHOLD; exports.G0 = _chunkP6KUGPHDcjs.G0; exports.IACS_RESISTIVITY_OHM_MM2_PER_M = _chunkDGO2DCO5cjs.IACS_RESISTIVITY_OHM_MM2_PER_M; exports.MIN_MARGIN_MM = _chunk5Q6IASB2cjs.MIN_MARGIN_MM; exports.REFERENCE_DENSITY_G_PER_CM3 = REFERENCE_DENSITY_G_PER_CM3; exports.REF_TARGET_COEFF = _chunkRPKDEFSJcjs.REF_TARGET_COEFF; exports.REF_TARGET_OFFSET_N = _chunkRPKDEFSJcjs.REF_TARGET_OFFSET_N; exports.STANDARD_GAUGE_M = _chunk4UU7WA7Ncjs.STANDARD_GAUGE_M; exports.STANDARD_UNIT_WEIGHT_KG_PER_KM = STANDARD_UNIT_WEIGHT_KG_PER_KM; exports.STEEL_POLE_SERIES_KNM = _chunk4344WWAFcjs.STEEL_POLE_SERIES_KNM; exports.TB2809_AMPACITY_A = TB2809_AMPACITY_A; exports.TB2809_WIRE_PARAMS = _chunkMTAYG3U2cjs.TB2809_WIRE_PARAMS; exports.TENSION_DIFF_RATIO = _chunkCSLI5HEJcjs.TENSION_DIFF_RATIO; exports.TEST_MOMENT_FACTOR = _chunk4344WWAFcjs.TEST_MOMENT_FACTOR; exports.TRANSMISSION_RATIOS = _chunk5Q6IASB2cjs.TRANSMISSION_RATIOS; exports.USCD_BANDS = _chunkLBGUOTCJcjs.USCD_BANDS; exports.WIRE_PRESETS = WIRE_PRESETS; exports.ampacityDeratingFactor = _chunkNBFOB2PIcjs.ampacityDeratingFactor; exports.ampacityMeta = _chunkNBFOB2PIcjs.ampacityMeta; exports.anchorLengthCheck = _chunkCSLI5HEJcjs.anchorLengthCheck; exports.anchorLengthMeta = _chunkCSLI5HEJcjs.anchorLengthMeta; exports.assessContactForce = _chunkRPKDEFSJcjs.assessContactForce; exports.bValue = _chunkHXALVJ4Gcjs.bValue; exports.bvalueMeta = _chunkHXALVJ4Gcjs.bvalueMeta; exports.cantShiftM = _chunk4UU7WA7Ncjs.cantShiftM; exports.cantileverCut = _chunkWGTOBRYVcjs.cantileverCut; exports.cantileverMeta = _chunkWGTOBRYVcjs.cantileverMeta; exports.copperMeta = _chunkMTAYG3U2cjs.copperMeta; exports.creepageCheck = _chunkLBGUOTCJcjs.creepageCheck; exports.creepageMeta = _chunkLBGUOTCJcjs.creepageMeta; exports.crossSpanAnalyze = _chunkX25CXRVEcjs.crossSpanAnalyze; exports.crossSpanMeta = _chunkX25CXRVEcjs.crossSpanMeta; exports.curveStaggerCheck = _chunk4UU7WA7Ncjs.curveStaggerCheck; exports.curveStaggerMeta = _chunk4UU7WA7Ncjs.curveStaggerMeta; exports.deratedAmpacityA = _chunkNBFOB2PIcjs.deratedAmpacityA; exports.deriveLinearMassKgPerM = deriveLinearMassKgPerM; exports.dropperLengths = _chunkJ2UXRMTUcjs.dropperLengths; exports.dropperMeta = _chunkJ2UXRMTUcjs.dropperMeta; exports.dropperPositionsM = _chunkJ2UXRMTUcjs.dropperPositionsM; exports.elongationMM = _chunk5Q6IASB2cjs.elongationMM; exports.equivalentSpanM = _chunk3ERFRRHZcjs.equivalentSpanM; exports.findAmpacityA = findAmpacityA; exports.findWirePreset = findWirePreset; exports.forceMeta = _chunkRPKDEFSJcjs.forceMeta; exports.iceLoadNPerM = _chunkP6KUGPHDcjs.iceLoadNPerM; exports.icingCheck = _chunkP6KUGPHDcjs.icingCheck; exports.icingMeta = _chunkP6KUGPHDcjs.icingMeta; exports.kmHToMPerS = _chunkNBHEOJ5Acjs.kmHToMPerS; exports.maxParabolaSagM = _chunkJ2UXRMTUcjs.maxParabolaSagM; exports.maxSpanFromSagM = _chunkPYNVEHGRcjs.maxSpanFromSagM; exports.naturalFrequencyHz = _chunkNBHEOJ5Acjs.naturalFrequencyHz; exports.parabolaSagM = _chunkJ2UXRMTUcjs.parabolaSagM; exports.poleCapacityCheck = _chunk4344WWAFcjs.poleCapacityCheck; exports.poleCapacityMeta = _chunk4344WWAFcjs.poleCapacityMeta; exports.referenceTargetForceN = _chunkRPKDEFSJcjs.referenceTargetForceN; exports.requiredStrokeMM = _chunk5Q6IASB2cjs.requiredStrokeMM; exports.resistanceAtTempOhmPerKm = _chunkDGO2DCO5cjs.resistanceAtTempOhmPerKm; exports.sagM = _chunk3ERFRRHZcjs.sagM; exports.sagMM = _chunkPYNVEHGRcjs.sagMM; exports.sagMeta = _chunkPYNVEHGRcjs.sagMeta; exports.sectionFromDiameterMM2 = _chunk5INEDXRYcjs.sectionFromDiameterMM2; exports.shortCircuitCheck = _chunkNBFOB2PIcjs.shortCircuitCheck; exports.shortCircuitMinSectionMM2 = _chunkNBFOB2PIcjs.shortCircuitMinSectionMM2; exports.solveTensionN = _chunk3ERFRRHZcjs.solveTensionN; exports.stateCoefficientK = _chunk3ERFRRHZcjs.stateCoefficientK; exports.statisticalForcesN = _chunkRPKDEFSJcjs.statisticalForcesN; exports.steadyArmAngleDeg = _chunk57J7I6JAcjs.steadyArmAngleDeg; exports.steadyArmCheck = _chunk57J7I6JAcjs.steadyArmCheck; exports.steadyArmMeta = _chunk57J7I6JAcjs.steadyArmMeta; exports.strokeCheck = _chunk5Q6IASB2cjs.strokeCheck; exports.strokeMeta = _chunk5Q6IASB2cjs.strokeMeta; exports.tensionAt = _chunk3ERFRRHZcjs.tensionAt; exports.tensionCurve = _chunk3ERFRRHZcjs.tensionCurve; exports.tensionFromSagKN = _chunkPYNVEHGRcjs.tensionFromSagKN; exports.tensionMeta = _chunk3ERFRRHZcjs.tensionMeta; exports.unitWeightToKgPerM = unitWeightToKgPerM; exports.versineM = _chunk4UU7WA7Ncjs.versineM; exports.voltageDropCheck = _chunkRVP3IU2Lcjs.voltageDropCheck; exports.voltageDropMeta = _chunkRVP3IU2Lcjs.voltageDropMeta; exports.wavePropagationSpeedMPerS = _chunkNBHEOJ5Acjs.wavePropagationSpeedMPerS; exports.waveSpeedCheck = _chunkNBHEOJ5Acjs.waveSpeedCheck; exports.wavespeedMeta = _chunkNBHEOJ5Acjs.wavespeedMeta; exports.wearMeta = _chunk5INEDXRYcjs.wearMeta; exports.wearRatio = _chunk5INEDXRYcjs.wearRatio; exports.weightOfPresetNPerM = weightOfPresetNPerM; exports.weightPerLengthNPerM = weightPerLengthNPerM; exports.windClearanceCheck = _chunkFVESJBUDcjs.windClearanceCheck; exports.windDeflectionM = _chunkFVESJBUDcjs.windDeflectionM; exports.windLoadNPerM = _chunkFVESJBUDcjs.windLoadNPerM; exports.windMeta = _chunkFVESJBUDcjs.windMeta; exports.wireLookup = _chunkMTAYG3U2cjs.wireLookup;
 //# sourceMappingURL=index.cjs.map

package/dist/index.cjs.map

@@ -1 +1 @@
-{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACA;AClDO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;ADYA;AACA;AEzGA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AFsFA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACF,ooJAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTHM-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTHM/CTHA 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTHM-120（铜镁 120）',\n    nameEn: 'CTHM-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTHM-150（铜镁 150）',\n    nameEn: 'CTHM-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTHA-120（铜银 120）',\n    nameEn: 'CTHA-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"]}
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACA;AC5FO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;ADsDA;AACA;AEnJA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AFg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gqMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"]}

package/dist/index.d.cts

@@ -11,6 +11,14 @@ export { DEFAULT_WARN_THRESHOLD, WaveSpeedInput, WaveSpeedResult, kmHToMPerS, na
 export { DEFAULT_MIN_END_VOLTAGE_V, VoltageDropInput, VoltageDropResult, voltageDropCheck, voltageDropMeta } from './voltage-drop/index.cjs';
 export { CurveStaggerInput, CurveStaggerResult, DEFAULT_PANTOGRAPH_HEIGHT_M, STANDARD_GAUGE_M, cantShiftM, curveStaggerCheck, curveStaggerMeta, versineM } from './curve-stagger/index.cjs';
 export { IcingCheckInput, IcingCheckResult, icingCheck, icingMeta } from './icing/index.cjs';
+export { SteadyArmAngleResult, SteadyArmCheckResult, SteadyArmInput, steadyArmAngleDeg, steadyArmCheck, steadyArmMeta } from './steady-arm/index.cjs';
+export { CrossSpanNodeInput, CrossSpanResult, crossSpanAnalyze, crossSpanMeta } from './cross-span/index.cjs';
+export { BValueInput, BValueResult, bValue, bvalueMeta } from './bvalue/index.cjs';
+export { SagInput, maxSpanFromSagM, sagMM, sagMeta, tensionFromSagKN } from './sag/index.cjs';
+export { AnchorLengthInput, AnchorLengthResult, TENSION_DIFF_RATIO, anchorLengthCheck, anchorLengthMeta } from './anchor-length/index.cjs';
+export { CREEPAGE_FLOOR_GENERAL, CREEPAGE_FLOOR_VCUT, USCD_BANDS, creepageCheck, creepageMeta } from './creepage/index.cjs';
+export { PoleCapacityInput, PoleCapacityResult, STEEL_POLE_SERIES_KNM, TEST_MOMENT_FACTOR, poleCapacityCheck, poleCapacityMeta } from './pole-capacity/index.cjs';
+export { ASSEMBLY_TOLERANCE_MM, CantileverInput, CantileverResult, cantileverCut, cantileverMeta } from './cantilever/index.cjs';
 
 /**
  * 电阻温度修正 —— copper 与 voltage-drop 共用。
@@ -70,12 +78,12 @@ declare function iceLoadNPerM(params: IceLoadParams): number;
  *   注：参考单位质量按密度 8.94 g/cm³ 计算
  * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，
  * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。
- * 因此 CTHM-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
+ * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
  * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。
  * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。
  *
  * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；
- * CTHM/CTHA 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
+ * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
  */
 interface WireSpec {
     /** 唯一标识 */

package/dist/index.d.ts

@@ -11,6 +11,14 @@ export { DEFAULT_WARN_THRESHOLD, WaveSpeedInput, WaveSpeedResult, kmHToMPerS, na
 export { DEFAULT_MIN_END_VOLTAGE_V, VoltageDropInput, VoltageDropResult, voltageDropCheck, voltageDropMeta } from './voltage-drop/index.js';
 export { CurveStaggerInput, CurveStaggerResult, DEFAULT_PANTOGRAPH_HEIGHT_M, STANDARD_GAUGE_M, cantShiftM, curveStaggerCheck, curveStaggerMeta, versineM } from './curve-stagger/index.js';
 export { IcingCheckInput, IcingCheckResult, icingCheck, icingMeta } from './icing/index.js';
+export { SteadyArmAngleResult, SteadyArmCheckResult, SteadyArmInput, steadyArmAngleDeg, steadyArmCheck, steadyArmMeta } from './steady-arm/index.js';
+export { CrossSpanNodeInput, CrossSpanResult, crossSpanAnalyze, crossSpanMeta } from './cross-span/index.js';
+export { BValueInput, BValueResult, bValue, bvalueMeta } from './bvalue/index.js';
+export { SagInput, maxSpanFromSagM, sagMM, sagMeta, tensionFromSagKN } from './sag/index.js';
+export { AnchorLengthInput, AnchorLengthResult, TENSION_DIFF_RATIO, anchorLengthCheck, anchorLengthMeta } from './anchor-length/index.js';
+export { CREEPAGE_FLOOR_GENERAL, CREEPAGE_FLOOR_VCUT, USCD_BANDS, creepageCheck, creepageMeta } from './creepage/index.js';
+export { PoleCapacityInput, PoleCapacityResult, STEEL_POLE_SERIES_KNM, TEST_MOMENT_FACTOR, poleCapacityCheck, poleCapacityMeta } from './pole-capacity/index.js';
+export { ASSEMBLY_TOLERANCE_MM, CantileverInput, CantileverResult, cantileverCut, cantileverMeta } from './cantilever/index.js';
 
 /**
  * 电阻温度修正 —— copper 与 voltage-drop 共用。
@@ -70,12 +78,12 @@ declare function iceLoadNPerM(params: IceLoadParams): number;
  *   注：参考单位质量按密度 8.94 g/cm³ 计算
  * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，
  * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。
- * 因此 CTHM-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
+ * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
  * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。
  * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。
  *
  * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；
- * CTHM/CTHA 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
+ * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
  */
 interface WireSpec {
     /** 唯一标识 */

package/dist/index.js

@@ -33,24 +33,6 @@ import {
   windLoadNPerM,
   windMeta
 } from "./chunk-RVG3LEZQ.js";
-import {
-  DEFAULT_BASE_AMBIENT_TEMP_DEG_C,
-  ampacityDeratingFactor,
-  ampacityMeta,
-  deratedAmpacityA,
-  shortCircuitCheck,
-  shortCircuitMinSectionMM2
-} from "./chunk-746H65EQ.js";
-import {
-  TB2809_WIRE_PARAMS,
-  copperMeta,
-  wireLookup
-} from "./chunk-CVA4EH2K.js";
-import {
-  COPPER_ALPHA_PER_DEG_C,
-  IACS_RESISTIVITY_OHM_MM2_PER_M,
-  resistanceAtTempOhmPerKm
-} from "./chunk-YHDO6XVM.js";
 import {
   DEFAULT_PANTOGRAPH_HEIGHT_M,
   STANDARD_GAUGE_M,
@@ -81,6 +63,23 @@ import {
   icingCheck,
   icingMeta
 } from "./chunk-GN6QNOUL.js";
+import {
+  STEEL_POLE_SERIES_KNM,
+  TEST_MOMENT_FACTOR,
+  poleCapacityCheck,
+  poleCapacityMeta
+} from "./chunk-VXVTT6WS.js";
+import {
+  maxSpanFromSagM,
+  sagMM,
+  sagMeta,
+  tensionFromSagKN
+} from "./chunk-C2XU3XKP.js";
+import {
+  steadyArmAngleDeg,
+  steadyArmCheck,
+  steadyArmMeta
+} from "./chunk-TO46PTS3.js";
 import {
   CONVENTIONAL_MARGIN_MM,
   MIN_MARGIN_MM,
@@ -90,6 +89,49 @@ import {
   strokeCheck,
   strokeMeta
 } from "./chunk-KOSC6EA3.js";
+import {
+  DEFAULT_BASE_AMBIENT_TEMP_DEG_C,
+  ampacityDeratingFactor,
+  ampacityMeta,
+  deratedAmpacityA,
+  shortCircuitCheck,
+  shortCircuitMinSectionMM2
+} from "./chunk-746H65EQ.js";
+import {
+  TENSION_DIFF_RATIO,
+  anchorLengthCheck,
+  anchorLengthMeta
+} from "./chunk-75EGROQB.js";
+import {
+  bValue,
+  bvalueMeta
+} from "./chunk-3GREMF76.js";
+import {
+  ASSEMBLY_TOLERANCE_MM,
+  cantileverCut,
+  cantileverMeta
+} from "./chunk-HZWNKKIB.js";
+import {
+  TB2809_WIRE_PARAMS,
+  copperMeta,
+  wireLookup
+} from "./chunk-IQR3SRCD.js";
+import {
+  COPPER_ALPHA_PER_DEG_C,
+  IACS_RESISTIVITY_OHM_MM2_PER_M,
+  resistanceAtTempOhmPerKm
+} from "./chunk-YHDO6XVM.js";
+import {
+  CREEPAGE_FLOOR_GENERAL,
+  CREEPAGE_FLOOR_VCUT,
+  USCD_BANDS,
+  creepageCheck,
+  creepageMeta
+} from "./chunk-CLVLOLUJ.js";
+import {
+  crossSpanAnalyze,
+  crossSpanMeta
+} from "./chunk-D5F5ES2R.js";
 
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
@@ -108,8 +150,8 @@ var COPPER_ALLOY_ALPHA_PER_DEG_C = 17e-6;
 var WIRE_PRESETS = [
   {
     id: "cthm120",
-    name: "CTHM-120\uFF08\u94DC\u9541 120\uFF09",
-    nameEn: "CTHM-120 (CuMg 120 mm\xB2)",
+    name: "CTMH-120\uFF08\u94DC\u9541 120\uFF09",
+    nameEn: "CTMH-120 (CuMg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
     elasticModulusGPa: 120,
@@ -118,8 +160,8 @@ var WIRE_PRESETS = [
   },
   {
     id: "cthm150",
-    name: "CTHM-150\uFF08\u94DC\u9541 150\uFF09",
-    nameEn: "CTHM-150 (CuMg 150 mm\xB2)",
+    name: "CTMH-150\uFF08\u94DC\u9541 150\uFF09",
+    nameEn: "CTMH-150 (CuMg 150 mm\xB2)",
     crossSectionMM2: 150,
     calculatedSectionMM2: 151,
     elasticModulusGPa: 120,
@@ -128,8 +170,8 @@ var WIRE_PRESETS = [
   },
   {
     id: "ctha120",
-    name: "CTHA-120\uFF08\u94DC\u94F6 120\uFF09",
-    nameEn: "CTHA-120 (CuAg 120 mm\xB2)",
+    name: "CTAH-120\uFF08\u94DC\u94F6 120\uFF09",
+    nameEn: "CTAH-120 (CuAg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
     elasticModulusGPa: 120,
@@ -189,9 +231,12 @@ function findAmpacityA(params) {
 }
 export {
   AIR_DENSITY_KG_PER_M3,
+  ASSEMBLY_TOLERANCE_MM,
   CONVENTIONAL_MARGIN_MM,
   COPPER_ALLOY_ALPHA_PER_DEG_C,
   COPPER_ALPHA_PER_DEG_C,
+  CREEPAGE_FLOOR_GENERAL,
+  CREEPAGE_FLOOR_VCUT,
   DEFAULT_BASE_AMBIENT_TEMP_DEG_C,
   DEFAULT_ICE_DENSITY_KG_PER_M3,
   DEFAULT_MIN_END_VOLTAGE_V,
@@ -206,15 +251,29 @@ export {
   REF_TARGET_OFFSET_N,
   STANDARD_GAUGE_M,
   STANDARD_UNIT_WEIGHT_KG_PER_KM,
+  STEEL_POLE_SERIES_KNM,
   TB2809_AMPACITY_A,
   TB2809_WIRE_PARAMS,
+  TENSION_DIFF_RATIO,
+  TEST_MOMENT_FACTOR,
   TRANSMISSION_RATIOS,
+  USCD_BANDS,
   WIRE_PRESETS,
   ampacityDeratingFactor,
   ampacityMeta,
+  anchorLengthCheck,
+  anchorLengthMeta,
   assessContactForce,
+  bValue,
+  bvalueMeta,
   cantShiftM,
+  cantileverCut,
+  cantileverMeta,
   copperMeta,
+  creepageCheck,
+  creepageMeta,
+  crossSpanAnalyze,
+  crossSpanMeta,
   curveStaggerCheck,
   curveStaggerMeta,
   deratedAmpacityA,
@@ -232,22 +291,31 @@ export {
   icingMeta,
   kmHToMPerS,
   maxParabolaSagM,
+  maxSpanFromSagM,
   naturalFrequencyHz,
   parabolaSagM,
+  poleCapacityCheck,
+  poleCapacityMeta,
   referenceTargetForceN,
   requiredStrokeMM,
   resistanceAtTempOhmPerKm,
   sagM,
+  sagMM,
+  sagMeta,
   sectionFromDiameterMM2,
   shortCircuitCheck,
   shortCircuitMinSectionMM2,
   solveTensionN,
   stateCoefficientK,
   statisticalForcesN,
+  steadyArmAngleDeg,
+  steadyArmCheck,
+  steadyArmMeta,
   strokeCheck,
   strokeMeta,
   tensionAt,
   tensionCurve,
+  tensionFromSagKN,
   tensionMeta,
   unitWeightToKgPerM,
   versineM,

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTHM-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTHM/CTHA 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTHM-120（铜镁 120）',\n    nameEn: 'CTHM-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTHM-150（铜镁 150）',\n    nameEn: 'CTHM-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTHA-120（铜银 120）',\n    nameEn: 'CTHA-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;AC5FA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}
+{"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;AC5FA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}

package/dist/pole-capacity/index.cjs

@@ -0,0 +1,13 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+
+var _chunk4344WWAFcjs = require('../chunk-4344WWAF.cjs');
+
+
+
+
+
+exports.STEEL_POLE_SERIES_KNM = _chunk4344WWAFcjs.STEEL_POLE_SERIES_KNM; exports.TEST_MOMENT_FACTOR = _chunk4344WWAFcjs.TEST_MOMENT_FACTOR; exports.poleCapacityCheck = _chunk4344WWAFcjs.poleCapacityCheck; exports.poleCapacityMeta = _chunk4344WWAFcjs.poleCapacityMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/pole-capacity/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/pole-capacity/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACA;AACF,2QAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/pole-capacity/index.cjs"}

package/dist/pole-capacity/index.d.cts

@@ -0,0 +1,47 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const poleCapacityMeta: CalculatorMeta;
+
+/** GB/T 25020.1-2025 格构式钢支柱标称容量系列（表 A.2），kN·m */
+declare const STEEL_POLE_SERIES_KNM: readonly [150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 750, 900, 1050, 1200, 1500];
+/** 承载力检验弯矩 = 1.5 × 标称容量（25020.1 表 A.2 表值规律） */
+declare const TEST_MOMENT_FACTOR = 1.5;
+/** 支柱容量校核输入。单位：kN、m、mm、Pa。 */
+interface PoleCapacityInput {
+    /** 区段类型 */
+    readonly section: 'line' | 'curve';
+    /** 接触线张力 T_j，kN */
+    readonly contactWireTensionKN: number;
+    /** 承力索张力 T_c，kN */
+    readonly messengerTensionKN: number;
+    /** 拉出值 a，mm */
+    readonly staggerMM: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 曲线半径 R，m（曲线区段） */
+    readonly curveRadiusM?: number;
+    /** 水平力合力作用高度 h_e，m */
+    readonly resultantHeightM: number;
+    /** 设计最大风压 P，Pa */
+    readonly windPressurePa: number;
+    /** 支柱迎风宽度 b，m */
+    readonly poleWidthM: number;
+    /** 支柱高度 h，m */
+    readonly poleHeightM: number;
+    /** 线索风载 F_wl，N */
+    readonly wireWindLoadN?: number;
+}
+interface PoleCapacityResult {
+    /** 悬挂水平力 F_h，N */
+    readonly horizontalForceN: number;
+    /** 工作弯矩 M，kN·m */
+    readonly workMomentKNM: number;
+    /** 折合标称容量（÷1.5），kN·m */
+    readonly nominalNeedKNM: number;
+    /** 选型结果 */
+    readonly selection: string | null;
+}
+/** 支柱容量选型（容量比较法，TB/T 2286 5.9.2 检验弯矩口径；钢柱 25020.1 5.1.1+附录A） */
+declare function poleCapacityCheck(input: PoleCapacityInput): PoleCapacityResult;
+
+export { type PoleCapacityInput, type PoleCapacityResult, STEEL_POLE_SERIES_KNM, TEST_MOMENT_FACTOR, poleCapacityCheck, poleCapacityMeta };