ocs-calculators 0.1.2 → 0.2.0

package/CHANGELOG.md

@@ -3,6 +3,18 @@
 本文件格式遵循 [Keep a Changelog](https://keepachangelog.com/zh-CN/1.1.0/)，
 版本号遵循[语义化版本](https://semver.org/lang/zh-CN/)。
 
+## [0.1.3] - 2026-09-07
+
+### 修复
+
+- **型号代码规范化**：`COPPER_TABLE` 与铜计算器的型号键由 H 前置误写形态
+  （`CTHM` / `CTHA` / `CTHS`）统一为站内规范写法 **`CTMH` / `CTAH` / `CTS`**
+  （H 后置构词，与 TB/T 2809-2026 牌号体系及站点词条口径一致）。
+  破坏性变更：以旧键字符串调用 copper 相关函数的调用方需同步改名，
+  旧键传入会得到「未知型号」错误。
+- 同日已在站点部署侧（itswe `calculator/assets/calc-core.js` 与 7 个计算器页）
+  完成相同归一，并修复 7 页输入控件的畸形 `id` 属性（曾致 JS 绑定整体失效）。
+
 ## [0.1.2] - 2026-09-06
 
 ### 新增

package/README.md

@@ -180,8 +180,8 @@ src/<模块名>/
 
 ## 相关项目
 
-- [ocs-wiki-content](https://github.com/showhoo/ocs-wiki-content) — 504 条词条快照与结构化数据（规划中）
-- [itswe](https://github.com/showhoo/itswe) — 站点介绍与建站文档（规划中）
+- ocs-wiki-content — 504 条词条快照与结构化数据（规划中，仓库未建，建仓后再挂链接）
+- [itswe](https://github.com/showhoo/itswe) — 站点介绍与建站文档
 
 ## 赞助
 
@@ -192,7 +192,7 @@ src/<模块名>/
 ## 授权
 
 - **代码**：[MIT](./LICENSE)
-- **配套百科内容**：CC BY-SA 4.0（见 ocs-wiki-content 仓库）
+- **配套百科内容**：CC BY-SA 4.0（见 [itswe](https://github.com/showhoo/itswe) 仓库 LICENSE 与 [itswe.com](https://www.itswe.com)）
 
 ---
 

package/README_EN.md

@@ -137,7 +137,7 @@ src/<module>/
 
 Development and maintenance of this project is supported by:
 
-**[Henan Chuangwei Railway Equipment Co., Ltd.](https://www.chuangwit.com)** (河南创为铁路器材有限公司)
+**[Henan Chuangwit Railway Equipment Co., Ltd.](https://www.chuangwit.com)** (河南创为铁路器材有限公司)
 
 ## License
 

package/dist/anchor-length/index.cjs

@@ -0,0 +1,11 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+var _chunkCSLI5HEJcjs = require('../chunk-CSLI5HEJ.cjs');
+
+
+
+
+exports.TENSION_DIFF_RATIO = _chunkCSLI5HEJcjs.TENSION_DIFF_RATIO; exports.anchorLengthCheck = _chunkCSLI5HEJcjs.anchorLengthCheck; exports.anchorLengthMeta = _chunkCSLI5HEJcjs.anchorLengthMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/anchor-length/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/anchor-length/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACF,kMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/anchor-length/index.cjs"}

package/dist/anchor-length/index.d.cts

@@ -0,0 +1,45 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const anchorLengthMeta: CalculatorMeta;
+
+/** 张力增量判据（TB 10009-2016 第 5.4.7 条） */
+declare const TENSION_DIFF_RATIO = 0.1;
+/** 锚段张力增量计算参数（教材口径，直线吊弦项量纲已复核）。单位：m、kN、1/℃、℃。 */
+interface AnchorLengthInput {
+    /** 区段类型：'line' 直线 | 'curve' 曲线 */
+    readonly section: 'line' | 'curve';
+    /** 接触线额定张力 T_N，kN（判据基准） */
+    readonly ratedTensionKN: number;
+    /** 半锚段长度 L（中心锚结至补偿器），m */
+    readonly halfSpanM?: number;
+    /** 曲线半径 R，m（曲线区段） */
+    readonly curveRadiusM?: number;
+    /** 定位器长度 d，m（曲线区段） */
+    readonly regulatorLengthM?: number;
+    /** 定位器数量 n（曲线区段） */
+    readonly regulatorCount?: number;
+    /** 跨距 l，m（直线吊弦项） */
+    readonly spanM?: number;
+    /** 吊弦平均长度 c，m（直线吊弦项） */
+    readonly dropperLengthM?: number;
+    /** 接触线单位重 g_j，kN/m（直线吊弦项） */
+    readonly wireWeightKNPerM?: number;
+    /** 线胀系数 α，1/℃（直线吊弦项） */
+    readonly expansionCoeff?: number;
+    /** 计算温差 Δt，℃（直线吊弦项） */
+    readonly tempDeltaC?: number;
+}
+interface AnchorLengthResult {
+    /** 张力增量，N */
+    readonly deltaN: number;
+    /** 判据限值 10%·T_N，N */
+    readonly limitN: number;
+    /** 张力差占额定张力比例 */
+    readonly ratio: number;
+    /** 是否合格（ΔT ≤ 10%·T_N） */
+    readonly passes: boolean;
+}
+/** 锚段张力增量（教材口径）与 10% 判据校核 */
+declare function anchorLengthCheck(input: AnchorLengthInput): AnchorLengthResult;
+
+export { type AnchorLengthInput, type AnchorLengthResult, TENSION_DIFF_RATIO, anchorLengthCheck, anchorLengthMeta };

package/dist/anchor-length/index.d.ts

@@ -0,0 +1,45 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const anchorLengthMeta: CalculatorMeta;
+
+/** 张力增量判据（TB 10009-2016 第 5.4.7 条） */
+declare const TENSION_DIFF_RATIO = 0.1;
+/** 锚段张力增量计算参数（教材口径，直线吊弦项量纲已复核）。单位：m、kN、1/℃、℃。 */
+interface AnchorLengthInput {
+    /** 区段类型：'line' 直线 | 'curve' 曲线 */
+    readonly section: 'line' | 'curve';
+    /** 接触线额定张力 T_N，kN（判据基准） */
+    readonly ratedTensionKN: number;
+    /** 半锚段长度 L（中心锚结至补偿器），m */
+    readonly halfSpanM?: number;
+    /** 曲线半径 R，m（曲线区段） */
+    readonly curveRadiusM?: number;
+    /** 定位器长度 d，m（曲线区段） */
+    readonly regulatorLengthM?: number;
+    /** 定位器数量 n（曲线区段） */
+    readonly regulatorCount?: number;
+    /** 跨距 l，m（直线吊弦项） */
+    readonly spanM?: number;
+    /** 吊弦平均长度 c，m（直线吊弦项） */
+    readonly dropperLengthM?: number;
+    /** 接触线单位重 g_j，kN/m（直线吊弦项） */
+    readonly wireWeightKNPerM?: number;
+    /** 线胀系数 α，1/℃（直线吊弦项） */
+    readonly expansionCoeff?: number;
+    /** 计算温差 Δt，℃（直线吊弦项） */
+    readonly tempDeltaC?: number;
+}
+interface AnchorLengthResult {
+    /** 张力增量，N */
+    readonly deltaN: number;
+    /** 判据限值 10%·T_N，N */
+    readonly limitN: number;
+    /** 张力差占额定张力比例 */
+    readonly ratio: number;
+    /** 是否合格（ΔT ≤ 10%·T_N） */
+    readonly passes: boolean;
+}
+/** 锚段张力增量（教材口径）与 10% 判据校核 */
+declare function anchorLengthCheck(input: AnchorLengthInput): AnchorLengthResult;
+
+export { type AnchorLengthInput, type AnchorLengthResult, TENSION_DIFF_RATIO, anchorLengthCheck, anchorLengthMeta };

package/dist/anchor-length/index.js

@@ -0,0 +1,11 @@
+import {
+  TENSION_DIFF_RATIO,
+  anchorLengthCheck,
+  anchorLengthMeta
+} from "../chunk-75EGROQB.js";
+export {
+  TENSION_DIFF_RATIO,
+  anchorLengthCheck,
+  anchorLengthMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/anchor-length/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/bvalue/index.cjs

@@ -0,0 +1,9 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+var _chunkHXALVJ4Gcjs = require('../chunk-HXALVJ4G.cjs');
+
+
+
+exports.bValue = _chunkHXALVJ4Gcjs.bValue; exports.bvalueMeta = _chunkHXALVJ4Gcjs.bvalueMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/bvalue/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/bvalue/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACF,6FAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/bvalue/index.cjs"}

package/dist/bvalue/index.d.cts

@@ -0,0 +1,35 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const bvalueMeta: CalculatorMeta;
+
+/** b 值（坠砣底面距地面高度）计算参数。单位：长度 mm、温度 ℃、张力 kN。 */
+interface BValueInput {
+    /** 设计最小 b 值 b_min，mm（最高温度时坠砣最低位） */
+    readonly minBMM: number;
+    /** 传动比倍数 n（1:3 取 3） */
+    readonly ratio: number;
+    /** 线膨胀系数 α，1/℃（铜合金约 1.7e-5） */
+    readonly expansionCoeff: number;
+    /** 半锚段长度 L，mm */
+    readonly halfSpanMM: number;
+    /** 最高工作温度 t_max，℃ */
+    readonly maxTempC: number;
+    /** 安装/检调温度 t_x，℃ */
+    readonly targetTempC: number;
+    /** 额定张力 T，kN（用于坠砣重量换算） */
+    readonly tensionKN?: number;
+}
+interface BValueResult {
+    /** 当前温度 b 值 b_x，mm */
+    readonly bMM: number;
+    /** 温度伸缩量 ΔL = α·L·(t_max − t_x)，mm */
+    readonly stretchMM: number;
+    /** 坠砣侧行程变化 n·ΔL，mm */
+    readonly strokeMM: number;
+    /** 坠砣总质量（W=T/n，m≈102·W，g 取 9.81 m/s²），kg */
+    readonly weightKg: number | null;
+}
+/** b 值计算：b_x = b_min + n·α·L·(t_max − t_x) */
+declare function bValue(params: BValueInput): BValueResult;
+
+export { type BValueInput, type BValueResult, bValue, bvalueMeta };

package/dist/bvalue/index.d.ts

@@ -0,0 +1,35 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const bvalueMeta: CalculatorMeta;
+
+/** b 值（坠砣底面距地面高度）计算参数。单位：长度 mm、温度 ℃、张力 kN。 */
+interface BValueInput {
+    /** 设计最小 b 值 b_min，mm（最高温度时坠砣最低位） */
+    readonly minBMM: number;
+    /** 传动比倍数 n（1:3 取 3） */
+    readonly ratio: number;
+    /** 线膨胀系数 α，1/℃（铜合金约 1.7e-5） */
+    readonly expansionCoeff: number;
+    /** 半锚段长度 L，mm */
+    readonly halfSpanMM: number;
+    /** 最高工作温度 t_max，℃ */
+    readonly maxTempC: number;
+    /** 安装/检调温度 t_x，℃ */
+    readonly targetTempC: number;
+    /** 额定张力 T，kN（用于坠砣重量换算） */
+    readonly tensionKN?: number;
+}
+interface BValueResult {
+    /** 当前温度 b 值 b_x，mm */
+    readonly bMM: number;
+    /** 温度伸缩量 ΔL = α·L·(t_max − t_x)，mm */
+    readonly stretchMM: number;
+    /** 坠砣侧行程变化 n·ΔL，mm */
+    readonly strokeMM: number;
+    /** 坠砣总质量（W=T/n，m≈102·W，g 取 9.81 m/s²），kg */
+    readonly weightKg: number | null;
+}
+/** b 值计算：b_x = b_min + n·α·L·(t_max − t_x) */
+declare function bValue(params: BValueInput): BValueResult;
+
+export { type BValueInput, type BValueResult, bValue, bvalueMeta };

package/dist/bvalue/index.js

@@ -0,0 +1,9 @@
+import {
+  bValue,
+  bvalueMeta
+} from "../chunk-3GREMF76.js";
+export {
+  bValue,
+  bvalueMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/bvalue/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/cantilever/index.cjs

@@ -0,0 +1,11 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+var _chunkWGTOBRYVcjs = require('../chunk-WGTOBRYV.cjs');
+
+
+
+
+exports.ASSEMBLY_TOLERANCE_MM = _chunkWGTOBRYVcjs.ASSEMBLY_TOLERANCE_MM; exports.cantileverCut = _chunkWGTOBRYVcjs.cantileverCut; exports.cantileverMeta = _chunkWGTOBRYVcjs.cantileverMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/cantilever/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/cantilever/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACF,4LAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/cantilever/index.cjs"}

package/dist/cantilever/index.d.cts

@@ -0,0 +1,31 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const cantileverMeta: CalculatorMeta;
+
+/** 腕臂预配安装偏差（TB 10758-2018 第 5.10.1 条），mm */
+declare const ASSEMBLY_TOLERANCE_MM = 5;
+/** 斜腕臂勾股下料计算输入。单位：m。 */
+interface CantileverInput {
+    /** 上下底座竖直距 h，m */
+    readonly verticalOffsetM: number;
+    /** 下底座至定位点水平投影 d，m */
+    readonly horizontalProjectionM: number;
+    /** 端部零件扣减 Δc，m */
+    readonly endDeductionM?: number;
+    /** 定位点至下底座竖直距 y_d，m */
+    readonly regHeightM?: number;
+}
+interface CantileverResult {
+    /** 理论斜长 √(h²+d²)，m */
+    readonly fullLengthM: number;
+    /** 下料长度 L = √(h²+d²) − Δc，m */
+    readonly cutLengthM: number;
+    /** 定位环安装位置 s = (y_d/h)·√(h²+d²)，m */
+    readonly regulatorPosM: number | null;
+    /** 安装允差，mm */
+    readonly toleranceMM: number;
+}
+/** 斜腕臂勾股下料（几何自证） */
+declare function cantileverCut(input: CantileverInput): CantileverResult;
+
+export { ASSEMBLY_TOLERANCE_MM, type CantileverInput, type CantileverResult, cantileverCut, cantileverMeta };

package/dist/cantilever/index.d.ts

@@ -0,0 +1,31 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const cantileverMeta: CalculatorMeta;
+
+/** 腕臂预配安装偏差（TB 10758-2018 第 5.10.1 条），mm */
+declare const ASSEMBLY_TOLERANCE_MM = 5;
+/** 斜腕臂勾股下料计算输入。单位：m。 */
+interface CantileverInput {
+    /** 上下底座竖直距 h，m */
+    readonly verticalOffsetM: number;
+    /** 下底座至定位点水平投影 d，m */
+    readonly horizontalProjectionM: number;
+    /** 端部零件扣减 Δc，m */
+    readonly endDeductionM?: number;
+    /** 定位点至下底座竖直距 y_d，m */
+    readonly regHeightM?: number;
+}
+interface CantileverResult {
+    /** 理论斜长 √(h²+d²)，m */
+    readonly fullLengthM: number;
+    /** 下料长度 L = √(h²+d²) − Δc，m */
+    readonly cutLengthM: number;
+    /** 定位环安装位置 s = (y_d/h)·√(h²+d²)，m */
+    readonly regulatorPosM: number | null;
+    /** 安装允差，mm */
+    readonly toleranceMM: number;
+}
+/** 斜腕臂勾股下料（几何自证） */
+declare function cantileverCut(input: CantileverInput): CantileverResult;
+
+export { ASSEMBLY_TOLERANCE_MM, type CantileverInput, type CantileverResult, cantileverCut, cantileverMeta };

package/dist/cantilever/index.js

@@ -0,0 +1,11 @@
+import {
+  ASSEMBLY_TOLERANCE_MM,
+  cantileverCut,
+  cantileverMeta
+} from "../chunk-HZWNKKIB.js";
+export {
+  ASSEMBLY_TOLERANCE_MM,
+  cantileverCut,
+  cantileverMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/cantilever/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/chunk-3GREMF76.js

@@ -0,0 +1,44 @@
+// src/bvalue/meta.ts
+var bvalueMeta = {
+  name: "b\u503C\uFF08\u5760\u7823\u9AD8\u5EA6\uFF09\u5B89\u88C5\u66F2\u7EBF",
+  nameEn: "B-Value (Balance Weight) Installation Curve",
+  summary: "\u6309 b_x = b_min + n\xB7\u03B1\xB7L\xB7(t_max \u2212 t_x) \u8BA1\u7B97\u4EFB\u4E00\u6E29\u5EA6\u4E0B\u5760\u7823\u5E95\u9762\u8DDD\u5730\u9762\u9AD8\u5EA6\uFF0C\u7528\u4E8E\u5760\u7823\u5B89\u88C5\u4E0E\u68C0\u8C03\u5B9A\u4F4D\u3002",
+  formula: [
+    "b_x = b_min + n\xB7\u03B1\xB7L\xB7(t_max \u2212 t_x)",
+    "\u5760\u7823\u4FA7\u884C\u7A0B\u53D8\u5316 n\xB7\u0394L\uFF0C\u0394L = \u03B1\xB7L\xB7(t_max \u2212 t_x)",
+    "\u5760\u7823\u4FA7\u5F20\u529B W = T/n\uFF0C\u5BF9\u5E94\u5760\u7823\u603B\u8D28\u91CF m \u2248 102\xB7W kg"
+  ],
+  references: [
+    "\u9650\u503C\u53E3\u5F84\uFF1A\u8FD0\u884C \u2265200 mm\u3001\u504F\u5DEE \xB1100 mm\uFF08TB 10421-2018 \u7B2C 5.22.3 \u6761\uFF09",
+    "\u8BBE\u8BA1 \u2265300 mm\uFF08\u671F\u520A\u5F15\u94C1\u8FD0\u30142007\u301569 \u53F7\uFF09",
+    "\u4F20\u52A8\u6BD4\u500D\u6570 n\uFF1A1:3 \u5373 n=3"
+  ],
+  scope: ["b_min\uFF1A50~1000 mm", "\u534A\u951A\u6BB5 L\uFF1A50000~900000 mm", "\u6E29\u5EA6\u5DEE\uFF1A0~100 \u2103", "\u4F20\u52A8\u6BD4\uFF1A2~4"],
+  disclaimer: "\u672C\u5DE5\u5177\u7ED3\u679C\u4EC5\u4F9B\u53C2\u8003\uFF0C\u5DE5\u7A0B\u5E94\u7528\u4EE5\u8BBE\u8BA1\u6587\u4EF6\u4E3A\u51C6\u3002\u8BE6\u89C1 DISCLAIMER.md\u3002",
+  online: "https://www.itswe.com/calculator/bvalue/"
+};
+
+// src/bvalue/index.ts
+function bValue(params) {
+  const { minBMM, ratio, expansionCoeff, halfSpanMM, maxTempC, targetTempC, tensionKN } = params;
+  if (!(minBMM >= 0)) throw new RangeError("b_min \u4E0D\u80FD\u4E3A\u8D1F\uFF0C\u6536\u5230 " + minBMM);
+  if (!(ratio > 0)) throw new RangeError("\u4F20\u52A8\u6BD4\u500D\u6570\u5FC5\u987B\u4E3A\u6B63\uFF0C\u6536\u5230 " + ratio);
+  if (!(halfSpanMM > 0)) throw new RangeError("\u534A\u951A\u6BB5\u957F\u5EA6\u5FC5\u987B\u4E3A\u6B63\uFF0C\u6536\u5230 " + halfSpanMM);
+  const dt = maxTempC - targetTempC;
+  const stretchMM = expansionCoeff * halfSpanMM * dt;
+  const strokeMM = ratio * stretchMM;
+  const bMM = minBMM + strokeMM;
+  let weightKg = null;
+  if (tensionKN !== void 0) {
+    if (!(tensionKN > 0)) throw new RangeError("\u989D\u5B9A\u5F20\u529B\u5FC5\u987B\u4E3A\u6B63\uFF0C\u6536\u5230 " + tensionKN);
+    const WKN = tensionKN / ratio;
+    weightKg = WKN * 102;
+  }
+  return { bMM, stretchMM, strokeMM, weightKg };
+}
+
+export {
+  bvalueMeta,
+  bValue
+};
+//# sourceMappingURL=chunk-3GREMF76.js.map

package/dist/chunk-3GREMF76.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["../src/bvalue/meta.ts","../src/bvalue/index.ts"],"sourcesContent":["import type { CalculatorMeta } from '../types';\n\nexport const bvalueMeta: CalculatorMeta = {\n  name: 'b值（坠砣高度）安装曲线',\n  nameEn: 'B-Value (Balance Weight) Installation Curve',\n  summary: '按 b_x = b_min + n·α·L·(t_max − t_x) 计算任一温度下坠砣底面距地面高度，用于坠砣安装与检调定位。',\n  formula: [\n    'b_x = b_min + n·α·L·(t_max − t_x)',\n    '坠砣侧行程变化 n·ΔL，ΔL = α·L·(t_max − t_x)',\n    '坠砣侧张力 W = T/n，对应坠砣总质量 m ≈ 102·W kg',\n  ],\n  references: [\n    '限值口径：运行 ≥200 mm、偏差 ±100 mm（TB 10421-2018 第 5.22.3 条）',\n    '设计 ≥300 mm（期刊引铁运〔2007〕69 号）',\n    '传动比倍数 n：1:3 即 n=3',\n  ],\n  scope: ['b_min：50~1000 mm', '半锚段 L：50000~900000 mm', '温度差：0~100 ℃', '传动比：2~4'],\n  disclaimer: '本工具结果仅供参考，工程应用以设计文件为准。详见 DISCLAIMER.md。',\n  online: 'https://www.itswe.com/calculator/bvalue/',\n};\n","export { bvalueMeta } from './meta';\n\n/** b 值（坠砣底面距地面高度）计算参数。单位：长度 mm、温度 ℃、张力 kN。 */\nexport interface BValueInput {\n  /** 设计最小 b 值 b_min，mm（最高温度时坠砣最低位） */\n  readonly minBMM: number;\n  /** 传动比倍数 n（1:3 取 3） */\n  readonly ratio: number;\n  /** 线膨胀系数 α，1/℃（铜合金约 1.7e-5） */\n  readonly expansionCoeff: number;\n  /** 半锚段长度 L，mm */\n  readonly halfSpanMM: number;\n  /** 最高工作温度 t_max，℃ */\n  readonly maxTempC: number;\n  /** 安装/检调温度 t_x，℃ */\n  readonly targetTempC: number;\n  /** 额定张力 T，kN（用于坠砣重量换算） */\n  readonly tensionKN?: number;\n}\n\nexport interface BValueResult {\n  /** 当前温度 b 值 b_x，mm */\n  readonly bMM: number;\n  /** 温度伸缩量 ΔL = α·L·(t_max − t_x)，mm */\n  readonly stretchMM: number;\n  /** 坠砣侧行程变化 n·ΔL，mm */\n  readonly strokeMM: number;\n  /** 坠砣总质量（W=T/n，m≈102·W，g 取 9.81 m/s²），kg */\n  readonly weightKg: number | null;\n}\n\n/** b 值计算：b_x = b_min + n·α·L·(t_max − t_x) */\nexport function bValue(params: BValueInput): BValueResult {\n  const { minBMM, ratio, expansionCoeff, halfSpanMM, maxTempC, targetTempC, tensionKN } = params;\n  if (!(minBMM >= 0)) throw new RangeError('b_min 不能为负，收到 ' + minBMM);\n  if (!(ratio > 0)) throw new RangeError('传动比倍数必须为正，收到 ' + ratio);\n  if (!(halfSpanMM > 0)) throw new RangeError('半锚段长度必须为正，收到 ' + halfSpanMM);\n  const dt = maxTempC - targetTempC;\n  const stretchMM = expansionCoeff * halfSpanMM * dt;\n  const strokeMM = ratio * stretchMM;\n  const bMM = minBMM + strokeMM;\n  let weightKg: number | null = null;\n  if (tensionKN !== undefined) {\n    if (!(tensionKN > 0)) throw new RangeError('额定张力必须为正，收到 ' + tensionKN);\n    const WKN = tensionKN / ratio;\n    weightKg = WKN * 102; // 1 kN ≈ 102 kg（g=9.81）\n  }\n  return { bMM, stretchMM, strokeMM, weightKg };\n}\n"],"mappings":";AAEO,IAAM,aAA6B;AAAA,EACxC,MAAM;AAAA,EACN,QAAQ;AAAA,EACR,SAAS;AAAA,EACT,SAAS;AAAA,IACP;AAAA,IACA;AAAA,IACA;AAAA,EACF;AAAA,EACA,YAAY;AAAA,IACV;AAAA,IACA;AAAA,IACA;AAAA,EACF;AAAA,EACA,OAAO,CAAC,yBAAoB,6CAAyB,wCAAe,6BAAS;AAAA,EAC7E,YAAY;AAAA,EACZ,QAAQ;AACV;;;ACaO,SAAS,OAAO,QAAmC;AACxD,QAAM,EAAE,QAAQ,OAAO,gBAAgB,YAAY,UAAU,aAAa,UAAU,IAAI;AACxF,MAAI,EAAE,UAAU,GAAI,OAAM,IAAI,WAAW,sDAAmB,MAAM;AAClE,MAAI,EAAE,QAAQ,GAAI,OAAM,IAAI,WAAW,8EAAkB,KAAK;AAC9D,MAAI,EAAE,aAAa,GAAI,OAAM,IAAI,WAAW,8EAAkB,UAAU;AACxE,QAAM,KAAK,WAAW;AACtB,QAAM,YAAY,iBAAiB,aAAa;AAChD,QAAM,WAAW,QAAQ;AACzB,QAAM,MAAM,SAAS;AACrB,MAAI,WAA0B;AAC9B,MAAI,cAAc,QAAW;AAC3B,QAAI,EAAE,YAAY,GAAI,OAAM,IAAI,WAAW,wEAAiB,SAAS;AACrE,UAAM,MAAM,YAAY;AACxB,eAAW,MAAM;AAAA,EACnB;AACA,SAAO,EAAE,KAAK,WAAW,UAAU,SAAS;AAC9C;","names":[]}

package/dist/chunk-4344WWAF.cjs

@@ -0,0 +1,58 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true}); function _nullishCoalesce(lhs, rhsFn) { if (lhs != null) { return lhs; } else { return rhsFn(); } }// src/pole-capacity/meta.ts
+var poleCapacityMeta = {
+  name: "\u652F\u67F1\u5BB9\u91CF\u9009\u578B\u6821\u6838",
+  nameEn: "Mast Capacity Selection Check",
+  summary: "\u5BB9\u91CF\u6BD4\u8F83\u6CD5\uFF1A\u60AC\u6302\u6C34\u5E73\u529B\u4E0E\u652F\u67F1\u98CE\u8F7D\u5408\u6210\u5DE5\u4F5C\u5F2F\u77E9\uFF0C\u5BF9\u7167 GB/T 25020.1 \u94A2\u652F\u67F1\u68C0\u9A8C\u5F2F\u77E9\u7CFB\u5217\u9009\u578B\u3002",
+  formula: [
+    "\u76F4\u7EBF\u4E4B\u5B57\u529B F_z = 4(T_j+T_c)\xB7a/l\uFF1B\u66F2\u7EBF\u529B F_q = (T_j+T_c)\xB7l/R",
+    "\u5DE5\u4F5C\u5F2F\u77E9 M = F_h\xB7h_e + P\xB7b\xB7h\xB2/2 + F_wl\xB7h_e",
+    "\u627F\u8F7D\u529B\u68C0\u9A8C\u5F2F\u77E9 = 1.5 \xD7 \u6807\u79F0\u5BB9\u91CF\uFF0825020.1 \u8868 A.2 \u8868\u503C\u89C4\u5F8B\uFF09"
+  ],
+  references: [
+    "\u94A2\u67F1\u76F4\u63A5\u4F9D\u636E\uFF1AGB/T 25020.1-2025 \u7B2C 5.1.1 \u6761 + \u9644\u5F55 A \u68C0\u9A8C\u5F2F\u77E9\u7CFB\u5217",
+    "\u540C\u53E3\u5F84\u6DF7\u51DD\u571F\u67F1\u6761\u6B3E\uFF1ATB/T 2286-2020 \u7B2C 5.9.2 \u6761\uFF08\u8377\u8F7D\u77E2\u91CF\u7EC4\u5408\u4E0D\u5927\u4E8E\u68C0\u9A8C\u5F2F\u77E9\uFF09",
+    "\u5206\u9879\u7CFB\u6570\u6781\u9650\u72B6\u6001\u6CD5\uFF08GB/T 32578-2016 6.3.3 \u8868 15\uFF09\u4E3A\u8BBE\u8BA1\u6B63\u5F0F\u53E3\u5F84\uFF0C\u4E0D\u53EF\u6DF7\u7528"
+  ],
+  scope: ["\u5F20\u529B\uFF1A5~45 kN", "\u8DE8\u8DDD\uFF1A30~90 m", "\u98CE\u538B\uFF1A100~1500 Pa", "\u652F\u67F1\u9AD8\uFF1A5~20 m"],
+  disclaimer: "\u672C\u5DE5\u5177\u7ED3\u679C\u4EC5\u4F9B\u53C2\u8003\uFF0C\u5DE5\u7A0B\u5E94\u7528\u4EE5\u8BBE\u8BA1\u6587\u4EF6\u4E3A\u51C6\u3002\u8BE6\u89C1 DISCLAIMER.md\u3002",
+  online: "https://www.itswe.com/calculator/pole-capacity/"
+};
+
+// src/pole-capacity/index.ts
+var STEEL_POLE_SERIES_KNM = [150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 750, 900, 1050, 1200, 1500];
+var TEST_MOMENT_FACTOR = 1.5;
+function poleCapacityCheck(input) {
+  const { section, contactWireTensionKN, messengerTensionKN, staggerMM, spanM, resultantHeightM, windPressurePa, poleWidthM, poleHeightM, wireWindLoadN } = input;
+  if (!(contactWireTensionKN >= 0) || !(messengerTensionKN >= 0)) throw new RangeError("\u5F20\u529B\u4E0D\u80FD\u4E3A\u8D1F");
+  const T = contactWireTensionKN + messengerTensionKN;
+  const a = staggerMM / 1e3;
+  const Fz = 4 * T * a / spanM;
+  let Fh;
+  if (section === "curve") {
+    if (!(input.curveRadiusM && input.curveRadiusM > 0)) throw new RangeError("\u66F2\u7EBF\u534A\u5F84\u5FC5\u987B\u4E3A\u6B63");
+    const Fq = T * spanM / input.curveRadiusM;
+    Fh = Math.abs(Fq - Fz);
+  } else {
+    Fh = Fz;
+  }
+  const M1 = Fh * resultantHeightM;
+  const M2 = windPressurePa * poleWidthM * Math.pow(poleHeightM, 2) / 2 / 1e3;
+  const M3 = (_nullishCoalesce(wireWindLoadN, () => ( 0))) * resultantHeightM / 1e3;
+  const M = M1 + M2 + M3;
+  const nomNeed = M / TEST_MOMENT_FACTOR;
+  const pick = _nullishCoalesce(STEEL_POLE_SERIES_KNM.find((n) => n >= nomNeed), () => ( null));
+  return {
+    horizontalForceN: Fh * 1e3,
+    workMomentKNM: M,
+    nominalNeedKNM: nomNeed,
+    selection: pick ? "G" + pick : null
+  };
+}
+
+
+
+
+
+
+exports.poleCapacityMeta = poleCapacityMeta; exports.STEEL_POLE_SERIES_KNM = STEEL_POLE_SERIES_KNM; exports.TEST_MOMENT_FACTOR = TEST_MOMENT_FACTOR; exports.poleCapacityCheck = poleCapacityCheck;
+//# sourceMappingURL=chunk-4344WWAF.cjs.map

package/dist/chunk-4344WWAF.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/chunk-4344WWAF.cjs","../src/pole-capacity/meta.ts","../src/pole-capacity/index.ts"],"names":[],"mappings":"AAAA;ACEO,IAAM,iBAAA,EAAmC;AAAA,EAC9C,IAAA,EAAM,kDAAA;AAAA,EACN,MAAA,EAAQ,+BAAA;AAAA,EACR,OAAA,EAAS,8OAAA;AAAA,EACT,OAAA,EAAS;AAAA,IACP,uGAAA;AAAA,IACA,2EAAA;AAAA,IACA;AAAA,EACF,CAAA;AAAA,EACA,UAAA,EAAY;AAAA,IACV,uIAAA;AAAA,IACA,0LAAA;AAAA,IACA;AAAA,EACF,CAAA;AAAA,EACA,KAAA,EAAO,CAAC,2BAAA,EAAc,2BAAA,EAAc,+BAAA,EAAkB,gCAAY,CAAA;AAAA,EAClE,UAAA,EAAY,sKAAA;AAAA,EACZ,MAAA,EAAQ;AACV,CAAA;ADAA;AACA;AEjBO,IAAM,sBAAA,EAAwB,CAAC,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,GAAA,EAAK,IAAA,EAAM,IAAA,EAAM,IAAI,CAAA;AAGhH,IAAM,mBAAA,EAAqB,GAAA;AAwC3B,SAAS,iBAAA,CAAkB,KAAA,EAA8C;AAC9E,EAAA,MAAM,EAAE,OAAA,EAAS,oBAAA,EAAsB,kBAAA,EAAoB,SAAA,EAAW,KAAA,EAAO,gBAAA,EAAkB,cAAA,EAAgB,UAAA,EAAY,WAAA,EAAa,cAAc,EAAA,EAAI,KAAA;AAC1J,EAAA,GAAA,CAAI,CAAA,CAAE,qBAAA,GAAwB,CAAA,EAAA,GAAM,CAAA,CAAE,mBAAA,GAAsB,CAAA,CAAA,EAAI,MAAM,IAAI,UAAA,CAAW,sCAAQ,CAAA;AAC7F,EAAA,MAAM,EAAA,EAAI,qBAAA,EAAuB,kBAAA;AACjC,EAAA,MAAM,EAAA,EAAI,UAAA,EAAY,GAAA;AACtB,EAAA,MAAM,GAAA,EAAM,EAAA,EAAI,EAAA,EAAI,EAAA,EAAK,KAAA;AACzB,EAAA,IAAI,EAAA;AACJ,EAAA,GAAA,CAAI,QAAA,IAAY,OAAA,EAAS;AACvB,IAAA,GAAA,CAAI,CAAA,CAAE,KAAA,CAAM,aAAA,GAAgB,KAAA,CAAM,aAAA,EAAe,CAAA,CAAA,EAAI,MAAM,IAAI,UAAA,CAAW,kDAAU,CAAA;AACpF,IAAA,MAAM,GAAA,EAAM,EAAA,EAAI,MAAA,EAAS,KAAA,CAAM,YAAA;AAC/B,IAAA,GAAA,EAAK,IAAA,CAAK,GAAA,CAAI,GAAA,EAAK,EAAE,CAAA;AAAA,EACvB,EAAA,KAAO;AACL,IAAA,GAAA,EAAK,EAAA;AAAA,EACP;AACA,EAAA,MAAM,GAAA,EAAK,GAAA,EAAK,gBAAA;AAChB,EAAA,MAAM,GAAA,EAAM,eAAA,EAAiB,WAAA,EAAa,IAAA,CAAK,GAAA,CAAI,WAAA,EAAa,CAAC,EAAA,EAAI,EAAA,EAAK,GAAA;AAC1E,EAAA,MAAM,GAAA,EAAA,kBAAO,aAAA,UAAiB,GAAA,EAAA,EAAK,iBAAA,EAAoB,GAAA;AACvD,EAAA,MAAM,EAAA,EAAI,GAAA,EAAK,GAAA,EAAK,EAAA;AACpB,EAAA,MAAM,QAAA,EAAU,EAAA,EAAI,kBAAA;AACpB,EAAA,MAAM,KAAA,mBAAO,qBAAA,CAAsB,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,EAAA,GAAK,OAAO,CAAA,UAAK,MAAA;AAChE,EAAA,OAAO;AAAA,IACL,gBAAA,EAAkB,GAAA,EAAK,GAAA;AAAA,IACvB,aAAA,EAAe,CAAA;AAAA,IACf,cAAA,EAAgB,OAAA;AAAA,IAChB,SAAA,EAAW,KAAA,EAAO,IAAA,EAAM,KAAA,EAAO;AAAA,EACjC,CAAA;AACF;AFtBA;AACA;AACE;AACA;AACA;AACA;AACF,mMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/chunk-4344WWAF.cjs","sourcesContent":[null,"import type { CalculatorMeta } from '../types';\n\nexport const poleCapacityMeta: CalculatorMeta = {\n  name: '支柱容量选型校核',\n  nameEn: 'Mast Capacity Selection Check',\n  summary: '容量比较法：悬挂水平力与支柱风载合成工作弯矩，对照 GB/T 25020.1 钢支柱检验弯矩系列选型。',\n  formula: [\n    '直线之字力 F_z = 4(T_j+T_c)·a/l；曲线力 F_q = (T_j+T_c)·l/R',\n    '工作弯矩 M = F_h·h_e + P·b·h²/2 + F_wl·h_e',\n    '承载力检验弯矩 = 1.5 × 标称容量（25020.1 表 A.2 表值规律）',\n  ],\n  references: [\n    '钢柱直接依据：GB/T 25020.1-2025 第 5.1.1 条 + 附录 A 检验弯矩系列',\n    '同口径混凝土柱条款：TB/T 2286-2020 第 5.9.2 条（荷载矢量组合不大于检验弯矩）',\n    '分项系数极限状态法（GB/T 32578-2016 6.3.3 表 15）为设计正式口径，不可混用',\n  ],\n  scope: ['张力：5~45 kN', '跨距：30~90 m', '风压：100~1500 Pa', '支柱高：5~20 m'],\n  disclaimer: '本工具结果仅供参考，工程应用以设计文件为准。详见 DISCLAIMER.md。',\n  online: 'https://www.itswe.com/calculator/pole-capacity/',\n};\n","export { poleCapacityMeta } from './meta';\n\n/** GB/T 25020.1-2025 格构式钢支柱标称容量系列（表 A.2），kN·m */\nexport const STEEL_POLE_SERIES_KNM = [150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 750, 900, 1050, 1200, 1500] as const;\n\n/** 承载力检验弯矩 = 1.5 × 标称容量（25020.1 表 A.2 表值规律） */\nexport const TEST_MOMENT_FACTOR = 1.5;\n\n/** 支柱容量校核输入。单位：kN、m、mm、Pa。 */\nexport interface PoleCapacityInput {\n  /** 区段类型 */\n  readonly section: 'line' | 'curve';\n  /** 接触线张力 T_j，kN */\n  readonly contactWireTensionKN: number;\n  /** 承力索张力 T_c，kN */\n  readonly messengerTensionKN: number;\n  /** 拉出值 a，mm */\n  readonly staggerMM: number;\n  /** 跨距 l，m */\n  readonly spanM: number;\n  /** 曲线半径 R，m（曲线区段） */\n  readonly curveRadiusM?: number;\n  /** 水平力合力作用高度 h_e，m */\n  readonly resultantHeightM: number;\n  /** 设计最大风压 P，Pa */\n  readonly windPressurePa: number;\n  /** 支柱迎风宽度 b，m */\n  readonly poleWidthM: number;\n  /** 支柱高度 h，m */\n  readonly poleHeightM: number;\n  /** 线索风载 F_wl，N */\n  readonly wireWindLoadN?: number;\n}\n\nexport interface PoleCapacityResult {\n  /** 悬挂水平力 F_h，N */\n  readonly horizontalForceN: number;\n  /** 工作弯矩 M，kN·m */\n  readonly workMomentKNM: number;\n  /** 折合标称容量（÷1.5），kN·m */\n  readonly nominalNeedKNM: number;\n  /** 选型结果 */\n  readonly selection: string | null;\n}\n\n/** 支柱容量选型（容量比较法，TB/T 2286 5.9.2 检验弯矩口径；钢柱 25020.1 5.1.1+附录A） */\nexport function poleCapacityCheck(input: PoleCapacityInput): PoleCapacityResult {\n  const { section, contactWireTensionKN, messengerTensionKN, staggerMM, spanM, resultantHeightM, windPressurePa, poleWidthM, poleHeightM, wireWindLoadN } = input;\n  if (!(contactWireTensionKN >= 0) || !(messengerTensionKN >= 0)) throw new RangeError('张力不能为负');\n  const T = contactWireTensionKN + messengerTensionKN;\n  const a = staggerMM / 1e3;\n  const Fz = (4 * T * a) / spanM; // kN\n  let Fh: number;\n  if (section === 'curve') {\n    if (!(input.curveRadiusM && input.curveRadiusM > 0)) throw new RangeError('曲线半径必须为正');\n    const Fq = (T * spanM) / input.curveRadiusM;\n    Fh = Math.abs(Fq - Fz);\n  } else {\n    Fh = Fz;\n  }\n  const M1 = Fh * resultantHeightM; // 悬挂水平力矩 kN·m\n  const M2 = (windPressurePa * poleWidthM * Math.pow(poleHeightM, 2) / 2) / 1e3; // 支柱风载矩\n  const M3 = ((wireWindLoadN ?? 0) * resultantHeightM) / 1e3;\n  const M = M1 + M2 + M3;\n  const nomNeed = M / TEST_MOMENT_FACTOR;\n  const pick = STEEL_POLE_SERIES_KNM.find((n) => n >= nomNeed) ?? null;\n  return {\n    horizontalForceN: Fh * 1e3,\n    workMomentKNM: M,\n    nominalNeedKNM: nomNeed,\n    selection: pick ? 'G' + pick : null,\n  };\n}\n"]}

package/dist/chunk-57J7I6JA.cjs

@@ -0,0 +1,116 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});// src/steady-arm/meta.ts
+var steadyArmMeta = {
+  name: "\u5B9A\u4F4D\u5668\u5761\u5EA6\u6821\u6838",
+  nameEn: "Steady Arm Slope Check",
+  summary: "\u8BA1\u7B97\u5B9A\u4F4D\u5668\u6240\u53D7\u6C34\u5E73\u529B\uFF08\u76F4\u7EBF\u4E4B\u5B57\u529B / \u66F2\u7EBF\u529B\uFF09\u4E0E\u5782\u76F4\u529B\uFF0C\u6C42\u5761\u5EA6\u89D2\u4E0E\u5761\u5EA6\u6BD4\uFF0C\u5E76\u6309\u76F4\u7EBF/\u66F2\u7EBF\u9650\u503C\u5224\u5B9A\u662F\u5426\u6EE1\u8DB3\u5761\u5EA6\u8981\u6C42\u3002",
+  formula: [
+    "\u76F4\u7EBF\u4E4B\u5B57\u529B\uFF1AFz = 4\xB7T\xB7a/l\uFF08a \u4E3A\u62C9\u51FA\u503C\uFF0Cmm \u6362\u7B97 m\uFF09",
+    "\u66F2\u7EBF\u529B\uFF1AFq = T\xB7l/R",
+    "\u66F2\u7EBF\u5408\u6210\uFF1AFs = |Fq \u2212 Fz|\uFF1B\u76F4\u7EBF\u533A\u6BB5 Fs = Fz",
+    "\u5782\u76F4\u529B\uFF1AFc = g_j\xB7l\u2081 + G_d",
+    "\u5761\u5EA6\u89D2\uFF1A\u03B8 = atan(Fc/Fs)\uFF0C\u5F27\u5EA6\u8F6C\u5EA6",
+    "\u5761\u5EA6\u6BD4\uFF08\u5782\u76F4\u2236\u6C34\u5E73\uFF09= 1\u2236n\uFF0Cn = Fs/Fc",
+    "\u9650\u503C\uFF08\u76F4\u7EBF \u03B8 \u2265 8\xB0\uFF1B\u66F2\u7EBF 6\xB0 \u2264 \u03B8 \u2264 16\xB0\uFF09"
+  ],
+  references: [
+    "\u6559\u6750\u901A\u884C\u8FD1\u4F3C\uFF1A\u4E4B\u5B57\u529B Fz = 4\xB7T\xB7a/l\u3001\u66F2\u7EBF\u529B Fq = T\xB7l/R",
+    "\u7F57\u5065\u7B49\u300A\u9AD8\u901F\u94C1\u8DEF\u63A5\u89E6\u7F51\u5B9A\u4F4D\u5668\u5761\u5EA6\u95EE\u9898\u7684\u6DF1\u5316\u7814\u7A76\u300B\uFF0C\u94C1\u9053\u5DE5\u7A0B\u5B66\u62A5 2013, 30(1): 76-80\uFF08300 km/h \u53CA\u4EE5\u4E0A\u5761\u5EA6\u9650\u503C\u53E3\u5F84\uFF09",
+    "\u5728\u7EBF\u53C2\u8003\uFF1Ahttps://www.itswe.com/calculator/steady-arm/"
+  ],
+  scope: [
+    "\u63A5\u89E6\u7EBF\u5F20\u529B T\uFF1A1 ~ 40 kN",
+    "\u62C9\u51FA\u503C a\uFF1A50 ~ 500 mm",
+    "\u8DE8\u8DDD l\uFF1A5 ~ 80 m",
+    "\u66F2\u7EBF\u534A\u5F84 R\uFF1A500 ~ 12000 m\uFF08undefined \u8868\u793A\u76F4\u7EBF\uFF09",
+    "\u63A5\u89E6\u7EBF\u5355\u4F4D\u91CD g_j\uFF1A0.001 ~ 0.1 kN/m",
+    "\u5B9A\u4F4D\u5668\u81EA\u91CD G_d\uFF1A0 ~ 0.5 kN",
+    "\u9650\u503C\u9002\u7528\u4E8E 300 km/h \u53CA\u4EE5\u4E0A\u9AD8\u94C1\uFF1B\u4E2D\u4F4E\u901F\u7EBF\u8DEF\u5761\u5EA6\u9650\u503C\u53EF\u4E0D\u540C",
+    "\u672A\u8BA1\u5165\u98CE\u8377\u8F7D\u3001\u5B9A\u4F4D\u5668\u957F\u5EA6\u65B9\u5411\u503E\u659C\u4E0E\u96F6\u90E8\u4EF6\u516C\u5DEE"
+  ],
+  disclaimer: "\u672C\u5DE5\u5177\u7ED3\u679C\u4EC5\u4F9B\u53C2\u8003\uFF0C\u5DE5\u7A0B\u5E94\u7528\u4EE5\u8BBE\u8BA1\u6587\u4EF6\u4E3A\u51C6\u3002\u8BE6\u89C1 DISCLAIMER.md\u3002",
+  online: "https://www.itswe.com/calculator/steady-arm/"
+};
+
+// src/steady-arm/index.ts
+function steadyArmAngleDeg(input) {
+  const {
+    contactWireTensionKN: T,
+    staggerMM,
+    spanM: l,
+    curveRadiusM,
+    firstDropperOffsetM: l1,
+    wireWeightKNPerM: gJ,
+    regulatorSelfWeightKN: gD
+  } = input;
+  if (!(T > 0)) {
+    throw new RangeError(`\u63A5\u89E6\u7EBF\u5F20\u529B\u5FC5\u987B\u4E3A\u6B63\u6570\uFF0C\u6536\u5230 ${T} kN`);
+  }
+  if (!(staggerMM > 0)) {
+    throw new RangeError(`\u62C9\u51FA\u503C\u5FC5\u987B\u4E3A\u6B63\u6570\uFF0C\u6536\u5230 ${staggerMM} mm`);
+  }
+  if (!(l > 0)) {
+    throw new RangeError(`\u8DE8\u8DDD\u5FC5\u987B\u4E3A\u6B63\u6570\uFF0C\u6536\u5230 ${l} m`);
+  }
+  if (curveRadiusM !== void 0 && !(curveRadiusM > 0)) {
+    throw new RangeError(`\u66F2\u7EBF\u534A\u5F84\u5FC5\u987B\u4E3A\u6B63\u6570\uFF0C\u6536\u5230 ${curveRadiusM} m`);
+  }
+  if (!(l1 >= 0)) {
+    throw new RangeError(`\u7B2C\u4E00\u540A\u5F26\u8DDD\u5B9A\u4F4D\u70B9\u8DDD\u79BB\u4E0D\u80FD\u4E3A\u8D1F\uFF0C\u6536\u5230 ${l1} m`);
+  }
+  if (!(gJ >= 0)) {
+    throw new RangeError(`\u63A5\u89E6\u7EBF\u5355\u4F4D\u91CD\u4E0D\u80FD\u4E3A\u8D1F\uFF0C\u6536\u5230 ${gJ} kN/m`);
+  }
+  if (!(gD >= 0)) {
+    throw new RangeError(`\u5B9A\u4F4D\u5668\u81EA\u91CD\u4E0D\u80FD\u4E3A\u8D1F\uFF0C\u6536\u5230 ${gD} kN`);
+  }
+  const isStraight = curveRadiusM === void 0;
+  const aM = staggerMM * 1e-3;
+  const fz = 4 * T * aM / l;
+  let fq = 0;
+  let fs = fz;
+  if (!isStraight) {
+    const R = curveRadiusM;
+    fq = T * l / R;
+    fs = Math.abs(fq - fz);
+  }
+  const fc = gJ * l1 + gD;
+  if (!(fs > 0)) {
+    throw new RangeError(
+      `\u6C34\u5E73\u5408\u6210\u529B Fs = ${fs} kN \u987B\u4E3A\u6B63\u6570\uFF08\u66F2\u7EBF\u529B\u4E0E\u4E4B\u5B57\u529B\u76F8\u7B49\u65F6\u5761\u5EA6\u65E0\u610F\u4E49\uFF09\uFF0C\u8BF7\u590D\u6838\u8F93\u5165`
+    );
+  }
+  if (!(fc > 0)) {
+    throw new RangeError(
+      `\u5782\u76F4\u529B Fc = ${fc} kN \u987B\u4E3A\u6B63\u6570\uFF0C\u8BF7\u590D\u6838\u63A5\u89E6\u7EBF\u5355\u4F4D\u91CD / \u5B9A\u4F4D\u5668\u81EA\u91CD`
+    );
+  }
+  const angleDeg = Math.atan(fc / fs) * 180 / Math.PI;
+  const slopeRatio = fs / fc;
+  return {
+    staggerForceKN: fz,
+    curveForceKN: fq,
+    horizontalForceKN: fs,
+    verticalForceKN: fc,
+    angleDeg,
+    slopeRatio,
+    isStraight
+  };
+}
+function steadyArmCheck(input) {
+  const base = steadyArmAngleDeg(input);
+  if (base.isStraight) {
+    const passes2 = base.angleDeg >= 8;
+    const reason2 = passes2 ? `\u76F4\u7EBF\u533A\u6BB5\uFF1A\u03B8 = ${base.angleDeg.toFixed(4)}\xB0 \u2265 8\xB0\uFF0C\u6EE1\u8DB3\u5761\u5EA6\u8981\u6C42` : `\u76F4\u7EBF\u533A\u6BB5\uFF1A\u03B8 = ${base.angleDeg.toFixed(4)}\xB0 < 8\xB0\uFF0C\u4E0D\u6EE1\u8DB3\u5761\u5EA6\u8981\u6C42\uFF08\u9700 \u2265 8\xB0\uFF09`;
+    return { ...base, passes: passes2, reason: reason2 };
+  }
+  const passes = base.angleDeg >= 6 && base.angleDeg <= 16;
+  const reason = passes ? `\u66F2\u7EBF\u533A\u6BB5\uFF1A\u03B8 = ${base.angleDeg.toFixed(4)}\xB0 \u4F4D\u4E8E 6\xB0 ~ 16\xB0 \u533A\u95F4\uFF0C\u6EE1\u8DB3\u5761\u5EA6\u8981\u6C42` : `\u66F2\u7EBF\u533A\u6BB5\uFF1A\u03B8 = ${base.angleDeg.toFixed(4)}\xB0 \u8D85\u51FA 6\xB0 ~ 16\xB0 \u533A\u95F4\uFF0C\u4E0D\u6EE1\u8DB3\u5761\u5EA6\u8981\u6C42`;
+  return { ...base, passes, reason };
+}
+
+
+
+
+
+exports.steadyArmMeta = steadyArmMeta; exports.steadyArmAngleDeg = steadyArmAngleDeg; exports.steadyArmCheck = steadyArmCheck;
+//# sourceMappingURL=chunk-57J7I6JA.cjs.map