node-liblzma 1.0.4 → 1.1.4

package/deps/xz/dos/INSTALL.txt

@@ -1,79 +0,0 @@
-
-Building XZ Utils for DOS
-=========================
-
-Introduction
-
-    This document explains how to build XZ Utils for DOS using DJGPP.
-    The resulting binaries should run at least on various DOS versions
-    and under Windows 95/98/98SE/ME, although the Windows version of
-    XZ Utils is recommended under Windows 95 and later.
-
-    This is currently experimental and has got very little testing.
-
-    Note: Makefile and config.h are updated only now and then. This
-    means that especially if you checked out a development version,
-    building for DOS probably won't work without updating Makefile
-    and config.h first.
-
-
-Getting and Installing DJGPP
-
-    You may use <http://www.delorie.com/djgpp/zip-picker.html> to help
-    deciding what to download, but as of writing (2010-10-09) that may
-    not be the most convenient way taking into account what components
-    are actually required to build XZ Utils. However, using the
-    zip-picker can still be worth doing to get nice short summary of
-    installation instructions (they can be found from readme.1st too).
-
-    For a more manual method, first select a mirror from
-    <http://www.delorie.com/djgpp/getting.html>. You need
-    the following files:
-
-        unzip32.exe  (if you don't already have a LFN-capable unzipper)
-        beta/v2/djdev204.zip
-        v2gnu/bnu219b.zip
-        v2gnu/gcc444b.zip
-        v2gnu/mak3791b.zip
-        v2misc/csdpmi7b.zip
-
-    If newer versions are available, probably you should try them first.
-    Note that djdev203.zip is too old to build XZ Utils; you need at
-    least djdev204.zip. Also note that you want csdpmi7b.zip even if you
-    run under Windows or DOSEMU, because the XZ Utils Makefile will embed
-    cwsdstub.exe to the resulting binaries.
-
-    See the instructions in readme.1st found from djdev204.zip. Here's
-    a short summary, but you should still read readme.1st.
-
-        C:\> mkdir DJGPP
-        C:\> cd DJGPP
-        C:\DJGPP> c:\download\unzip32 c:\download\djdev204.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\bnu219b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\gcc444b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\mak3791b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\csdpmi7b.zip
-
-        C:\DJGPP> set PATH=C:\DJGPP\BIN;%PATH%
-        C:\DJGPP> set DJGPP=C:\DJGPP\DJGPP.ENV
-
-    You may want to add the last two lines into AUTOEXEC.BAT or have,
-    for example, DJGPP.BAT which you can run before using DJGPP.
-
-    Make sure you use completely upper case path in the DJGPP environment
-    variable. This is not required by DJGPP, but the XZ Utils Makefile is
-    a bit stupid and expects that everything in DJGPP environment variable
-    is uppercase.
-
-
-Building
-
-    You need to have an environment that supports long filenames (LFN).
-    Once you have built XZ Utils, the resulting binaries can be run
-    without long filename support.
-
-    Run "make" in this directory (the directory containing this README).
-    You should get xz.exe (and a bunch of temporary files). Other tools
-    are not built. Having e.g. xzdec.exe doesn't save much space compared
-    to xz.exe, because the DJGPP runtime makes the .exe quite big anyway.
-

package/deps/xz/dos/Makefile

@@ -1,147 +0,0 @@
-###############################################################################
-#
-# Makefile to build XZ Utils using DJGPP
-#
-# Author: Lasse Collin
-#
-# This file has been put into the public domain.
-# You can do whatever you want with this file.
-#
-###############################################################################
-
-# For debugging, set comment "#define NDEBUG 1" from config.h to enable
-# the assert() macro, set STRIP=rem to disable stripping, and finally
-# e.g. CFLAGS="-g -O0".
-CC = gcc
-STRIP = strip
-CPPFLAGS =
-CFLAGS = -g -Wall -Wextra -Wfatal-errors -march=i386 -mtune=i686 -O2
-LDFLAGS = -lemu
-
-# NOTE: -fgnu89-inline is needed on DJGPP 2.04 beta and GCC >= 4.3.0
-# because time.h uses GNU-style "extern inline".
-ALL_CFLAGS = -std=gnu99 -fgnu89-inline
-
-ALL_CPPFLAGS = \
-	-I. \
-	-I../lib \
-	-I../src/common \
-	-I../src/liblzma/api \
-	-I../src/liblzma/common \
-	-I../src/liblzma/check \
-	-I../src/liblzma/rangecoder \
-	-I../src/liblzma/lz \
-	-I../src/liblzma/lzma \
-	-I../src/liblzma/delta \
-	-I../src/liblzma/simple \
-	-DHAVE_CONFIG_H
-
-ALL_CPPFLAGS += $(CPPFLAGS)
-ALL_CFLAGS += $(CFLAGS)
-
-.PHONY: all
-all: xz.exe
-
-SRCS_C = \
-	../lib/getopt.c \
-	../lib/getopt1.c \
-	../src/common/tuklib_cpucores.c \
-	../src/common/tuklib_exit.c \
-	../src/common/tuklib_mbstr_fw.c \
-	../src/common/tuklib_mbstr_width.c \
-	../src/common/tuklib_open_stdxxx.c \
-	../src/common/tuklib_physmem.c \
-	../src/common/tuklib_progname.c \
-	../src/liblzma/check/check.c \
-	../src/liblzma/check/crc32_table.c \
-	../src/liblzma/check/crc64_table.c \
-	../src/liblzma/check/sha256.c \
-	../src/liblzma/common/alone_decoder.c \
-	../src/liblzma/common/alone_encoder.c \
-	../src/liblzma/common/block_decoder.c \
-	../src/liblzma/common/block_encoder.c \
-	../src/liblzma/common/block_header_decoder.c \
-	../src/liblzma/common/block_header_encoder.c \
-	../src/liblzma/common/block_util.c \
-	../src/liblzma/common/common.c \
-	../src/liblzma/common/filter_common.c \
-	../src/liblzma/common/filter_decoder.c \
-	../src/liblzma/common/filter_encoder.c \
-	../src/liblzma/common/filter_flags_decoder.c \
-	../src/liblzma/common/filter_flags_encoder.c \
-	../src/liblzma/common/hardware_physmem.c \
-	../src/liblzma/common/index.c \
-	../src/liblzma/common/index_decoder.c \
-	../src/liblzma/common/index_encoder.c \
-	../src/liblzma/common/index_hash.c \
-	../src/liblzma/common/stream_decoder.c \
-	../src/liblzma/common/stream_encoder.c \
-	../src/liblzma/common/stream_flags_common.c \
-	../src/liblzma/common/stream_flags_decoder.c \
-	../src/liblzma/common/stream_flags_encoder.c \
-	../src/liblzma/common/vli_decoder.c \
-	../src/liblzma/common/vli_encoder.c \
-	../src/liblzma/common/vli_size.c \
-	../src/liblzma/delta/delta_common.c \
-	../src/liblzma/delta/delta_decoder.c \
-	../src/liblzma/delta/delta_encoder.c \
-	../src/liblzma/lz/lz_decoder.c \
-	../src/liblzma/lz/lz_encoder.c \
-	../src/liblzma/lz/lz_encoder_mf.c \
-	../src/liblzma/lzma/fastpos_table.c \
-	../src/liblzma/lzma/lzma2_decoder.c \
-	../src/liblzma/lzma/lzma2_encoder.c \
-	../src/liblzma/lzma/lzma_decoder.c \
-	../src/liblzma/lzma/lzma_encoder.c \
-	../src/liblzma/lzma/lzma_encoder_optimum_fast.c \
-	../src/liblzma/lzma/lzma_encoder_optimum_normal.c \
-	../src/liblzma/lzma/lzma_encoder_presets.c \
-	../src/liblzma/rangecoder/price_table.c \
-	../src/liblzma/simple/arm.c \
-	../src/liblzma/simple/armthumb.c \
-	../src/liblzma/simple/ia64.c \
-	../src/liblzma/simple/powerpc.c \
-	../src/liblzma/simple/simple_coder.c \
-	../src/liblzma/simple/simple_decoder.c \
-	../src/liblzma/simple/simple_encoder.c \
-	../src/liblzma/simple/sparc.c \
-	../src/liblzma/simple/x86.c \
-	../src/xz/args.c \
-	../src/xz/coder.c \
-	../src/xz/file_io.c \
-	../src/xz/hardware.c \
-	../src/xz/list.c \
-	../src/xz/main.c \
-	../src/xz/message.c \
-	../src/xz/mytime.c \
-	../src/xz/options.c \
-	../src/xz/signals.c \
-	../src/xz/suffix.c \
-	../src/xz/util.c
-SRCS_ASM = \
-	../src/liblzma/check/crc32_x86.S \
-	../src/liblzma/check/crc64_x86.S
-
-OBJS_C = $(SRCS_C:.c=.o)
-OBJS_ASM = $(SRCS_ASM:.S=.o)
-OBJS = $(OBJS_C) $(OBJS_ASM)
-
-getopt.h:
-	update ../lib/getopt.in.h getopt.h
-
-$(OBJS): getopt.h
-
-$(OBJS_C): %.o: %.c
-	$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
-
-$(OBJS_ASM): %.o: %.S
-	$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
-
-# Make xz.exe not depend on an external DPMI server.
-xz.exe: $(OBJS)
-	$(CC) $(ALL_CFLAGS) $(OBJS) $(LDFLAGS) -o $@
-	$(STRIP) --strip-all $@
-	exe2coff $@
-	del $@
-	copy /b $(DJGPP:DJGPP.ENV=BIN\CWSDSTUB.EXE) + $(@:.exe=) $@
-	del $(@:.exe=)

package/deps/xz/dos/README.txt

@@ -1,123 +0,0 @@
-
-XZ Utils on DOS
-===============
-
-DOS-specific filename handling
-
-    xz detects at runtime if long filename (LFN) support is
-    available and will use it by default. It can be disabled by
-    setting an environment variable:
-
-        set lfn=n
-
-    When xz is in LFN mode, it behaves pretty much the same as it
-    does on other operating systems. Examples:
-
-        xz foo.tar          -> foo.tar.xz
-        xz -d foo.tar.xz    -> foo.tar
-
-        xz -F lzma foo.tar  -> foo.tar.lzma
-        xz -d foo.tar.lzma  -> foo.tar
-
-    When LFN support isn't available or it is disabled with LFN=n
-    environment setting, xz works in short filename (SFN) mode. This
-    affects filename suffix handling when compressing.
-
-    When compressing to the .xz format in SFN mode:
-
-      - Files without an extension get .xz just like on LFN systems.
-
-      - *.tar files become *.txz (shorthand for *.tar.xz). *.txz
-        is recognized by xz on all supported operating systems.
-        (Try to avoid confusing this with gzipped .txt files.)
-
-      - Files with 1-3 character extension have their extension modified
-        so that the last character is a dash ("-"). If the extension
-        is already three characters, the last character is lost. The
-        resulting *.?- or *.??- filename is recognized in LFN mode, but
-        it isn't recognized by xz on other operating systems.
-
-    Examples:
-
-        xz foo              -> foo.xz     |   xz -d foo.xz    -> foo
-        xz foo.tar          -> foo.txz    |   xz -d foo.txz   -> foo.tar
-        xz foo.c            -> foo.c-     |   xz -d foo.c-    -> foo.c
-        xz read.me          -> read.me-   |   xz -d read.me-  -> read.me
-        xz foo.txt          -> foo.tx-    |   xz -d foo.tx-   -> foo.tx   !
-
-    Note that in the last example above, the third character of the
-    filename extension is lost.
-
-    When compressing to the legacy .lzma format in SFN mode:
-
-      - *.tar files become *.tlz (shorthand for *.tar.lzma). *.tlz
-        is recognized by xz on all supported operating systems.
-
-      - Other files become *.lzm. The original filename extension
-        is lost. *.lzm is recognized also in LFN mode, but it is not
-        recognized by xz on other operating systems.
-
-    Examples:
-
-        xz -F lzma foo      -> foo.lzm    |   xz -d foo.lzm   -> foo
-        xz -F lzma foo.tar  -> foo.tlz    |   xz -d foo.tlz   -> foo.tar
-        xz -F lzma foo.c    -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-        xz -F lzma read.me  -> read.lzm   |   xz -d read.lzm  -> read     !
-        xz -F lzma foo.txt  -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-
-    When compressing with a custom suffix (-S .SUF, --suffix=.SUF) to
-    any file format:
-
-      - If the suffix begins with a dot, the filename extension is
-        replaced with the new suffix. The original extension is lost.
-
-      - If the suffix doesn't begin with a dot and the filename has no
-        extension and the filename given on the command line doesn't
-        have a dot at the end, the custom suffix is appended just like
-        on LFN systems.
-
-      - If the suffix doesn't begin with a dot and the filename has
-        an extension (or an extension-less filename is given with a dot
-        at the end), the last 1-3 characters of the filename extension
-        may get overwritten to fit the given custom suffix.
-
-    Examples:
-
-        xz -S x foo        -> foox      |  xz -dS x foox      -> foo
-        xz -S x foo.       -> foo.x     |  xz -dS x foo.x     -> foo
-        xz -S .x foo       -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S .x foo.      -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S x.y foo      -> foox.y    |  xz -dS x.y foox.y  -> foo
-        xz -S .a foo.c     -> foo.a     |  xz -dS .a foo.a    -> foo      !
-        xz -S a  foo.c     -> foo.ca    |  xz -dS a foo.ca    -> foo.c
-        xz -S ab foo.c     -> foo.cab   |  xz -dS ab foo.cab  -> foo.c
-        xz -S ab read.me   -> read.mab  |  xz -dS ab read.mab -> read.m   !
-        xz -S ab foo.txt   -> foo.tab   |  xz -dS ab foo.tab  -> foo.t    !
-        xz -S abc foo.txt  -> foo.abc   |  xz -dS abc foo.abc -> foo      !
-
-    When decompressing, the suffix handling in SFN mode is the same as
-    in LFN mode. The DOS-specific filenames *.lzm, *.?-, and *.??- are
-    recognized also in LFN mode.
-
-    xz handles certain uncommon situations safely:
-
-      - If the generated output filename refers to the same file as
-        the input file, xz detects this and refuses to compress or
-        decompress the input file even if --force is used. This can
-        happen when giving an overlong filename in SFN mode. E.g.
-        "xz -S x foo.texinfo" would try to write to foo.tex which on
-        SFN system is the same file as foo.texinfo.
-
-      - If the generated output filename is a special file like "con"
-        or "prn", xz detects this and refuses to compress or decompress
-        the input file even if --force is used.
-
-
-Bugs
-
-    xz doesn't necessarily work in Dosbox. It should work in DOSEMU.
-
-    Pressing Ctrl-c or Ctrl-Break won't remove the incomplete target file
-    when running under Windows XP Command Prompt (something goes wrong
-    with SIGINT handling). It works correctly under Windows 95/98/98SE/ME.
-

package/deps/xz/dos/config.h

@@ -1,130 +0,0 @@
-/* How many MiB of RAM to assume if the real amount cannot be determined. */
-#define ASSUME_RAM 32
-
-/* Define to 1 if crc32 integrity check is enabled. */
-#define HAVE_CHECK_CRC32 1
-
-/* Define to 1 if crc64 integrity check is enabled. */
-#define HAVE_CHECK_CRC64 1
-
-/* Define to 1 if sha256 integrity check is enabled. */
-#define HAVE_CHECK_SHA256 1
-
-/* Define to 1 if arm decoder is enabled. */
-#define HAVE_DECODER_ARM 1
-
-/* Define to 1 if armthumb decoder is enabled. */
-#define HAVE_DECODER_ARMTHUMB 1
-
-/* Define to 1 if delta decoder is enabled. */
-#define HAVE_DECODER_DELTA 1
-
-/* Define to 1 if ia64 decoder is enabled. */
-#define HAVE_DECODER_IA64 1
-
-/* Define to 1 if lzma1 decoder is enabled. */
-#define HAVE_DECODER_LZMA1 1
-
-/* Define to 1 if lzma2 decoder is enabled. */
-#define HAVE_DECODER_LZMA2 1
-
-/* Define to 1 if powerpc decoder is enabled. */
-#define HAVE_DECODER_POWERPC 1
-
-/* Define to 1 if sparc decoder is enabled. */
-#define HAVE_DECODER_SPARC 1
-
-/* Define to 1 if x86 decoder is enabled. */
-#define HAVE_DECODER_X86 1
-
-/* Define to 1 if arm encoder is enabled. */
-#define HAVE_ENCODER_ARM 1
-
-/* Define to 1 if armthumb encoder is enabled. */
-#define HAVE_ENCODER_ARMTHUMB 1
-
-/* Define to 1 if delta encoder is enabled. */
-#define HAVE_ENCODER_DELTA 1
-
-/* Define to 1 if ia64 encoder is enabled. */
-#define HAVE_ENCODER_IA64 1
-
-/* Define to 1 if lzma1 encoder is enabled. */
-#define HAVE_ENCODER_LZMA1 1
-
-/* Define to 1 if lzma2 encoder is enabled. */
-#define HAVE_ENCODER_LZMA2 1
-
-/* Define to 1 if powerpc encoder is enabled. */
-#define HAVE_ENCODER_POWERPC 1
-
-/* Define to 1 if sparc encoder is enabled. */
-#define HAVE_ENCODER_SPARC 1
-
-/* Define to 1 if x86 encoder is enabled. */
-#define HAVE_ENCODER_X86 1
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define to 1 if you have the <limits.h> header file. */
-#define HAVE_LIMITS_H 1
-
-/* Define to 1 to enable bt2 match finder. */
-#define HAVE_MF_BT2 1
-
-/* Define to 1 to enable bt3 match finder. */
-#define HAVE_MF_BT3 1
-
-/* Define to 1 to enable bt4 match finder. */
-#define HAVE_MF_BT4 1
-
-/* Define to 1 to enable hc3 match finder. */
-#define HAVE_MF_HC3 1
-
-/* Define to 1 to enable hc4 match finder. */
-#define HAVE_MF_HC4 1
-
-/* Define to 1 if stdbool.h conforms to C99. */
-#define HAVE_STDBOOL_H 1
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#define HAVE_SYS_TIME_H 1
-
-/* Define to 1 if you have the `utimes' function. */
-#define HAVE_UTIMES 1
-
-/* Define to 1 or 0, depending whether the compiler supports simple visibility
-   declarations. */
-#define HAVE_VISIBILITY 0
-
-/* Define to 1 if the system has the type `_Bool'. */
-#define HAVE__BOOL 1
-
-/* Define to 1 to disable debugging code. */
-#define NDEBUG 1
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "lasse.collin@tukaani.org"
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME "XZ Utils"
-
-/* Define to the home page for this package. */
-#define PACKAGE_URL "http://tukaani.org/xz/"
-
-/* The size of `size_t', as computed by sizeof. */
-#define SIZEOF_SIZE_T 4
-
-/* Define to 1 if the system supports fast unaligned access to 16-bit and
-   32-bit integers. */
-#define TUKLIB_FAST_UNALIGNED_ACCESS 1

package/deps/xz/extra/7z2lzma/7z2lzma.bash

@@ -1,115 +0,0 @@
-#!/bin/bash
-#
-#############################################################################
-#
-# 7z2lzma.bash is very primitive .7z to .lzma converter. The input file must
-# have exactly one LZMA compressed stream, which has been created with the
-# default lc, lp, and pb values. The CRC32 in the .7z archive is not checked,
-# and the script may seem to succeed while it actually created a corrupt .lzma
-# file. You should always try uncompressing both the original .7z and the
-# created .lzma and compare that the output is identical.
-#
-# This script requires basic GNU tools and 7z or 7za tool from p7zip.
-#
-# Last modified: 2009-01-15 14:25+0200
-#
-#############################################################################
-#
-# Author: Lasse Collin <lasse.collin@tukaani.org>
-#
-# This file has been put into the public domain.
-# You can do whatever you want with this file.
-#
-#############################################################################
-
-# You can use 7z or 7za, both will work.
-SEVENZIP=7za
-
-if [ $# != 2 -o -z "$1" -o -z "$2" ]; then
-	echo "Usage: $0 input.7z output.lzma"
-	exit 1
-fi
-
-# Converts an integer variable to little endian binary integer.
-int2bin()
-{
-	local LEN=$1
-	local NUM=$2
-	local HEX=(0 1 2 3 4 5 6 7 8 9 A B C D E F)
-	local I
-	for ((I=0; I < "$LEN"; ++I)); do
-		printf "\\x${HEX[(NUM >> 4) & 0x0F]}${HEX[NUM & 0x0F]}"
-		NUM=$((NUM >> 8))
-	done
-}
-
-# Make sure we get possible errors from pipes.
-set -o pipefail
-
-# Get information about the input file. At least older 7z and 7za versions
-# may return with zero exit status even when an error occurred, so check
-# if the output has any lines beginning with "Error".
-INFO=$("$SEVENZIP" l -slt "$1")
-if [ $? != 0 ] || printf '%s\n' "$INFO" | grep -q ^Error; then
-	printf '%s\n' "$INFO"
-	exit 1
-fi
-
-# Check if the input file has more than one compressed block.
-if printf '%s\n' "$INFO" | grep -q '^Block = 1'; then
-	echo "Cannot convert, because the input file has more than"
-	echo "one compressed block."
-	exit 1
-fi
-
-# Get compressed, uncompressed, and dictionary size.
-CSIZE=$(printf '%s\n' "$INFO" | sed -rn 's|^Packed Size = ([0-9]+$)|\1|p')
-USIZE=$(printf '%s\n' "$INFO" | sed -rn 's|^Size = ([0-9]+$)|\1|p')
-DICT=$(printf '%s\n' "$INFO" | sed -rn 's|^Method = LZMA:([0-9]+[bkm]?)$|\1|p')
-
-if [ -z "$CSIZE" -o -z "$USIZE" -o -z "$DICT" ]; then
-	echo "Parsing output of $SEVENZIP failed. Maybe the file uses some"
-	echo "other compression method than plain LZMA."
-	exit 1
-fi
-
-# The following assumes that the default lc, lp, and pb settings were used.
-# Otherwise the output will be corrupt.
-printf '\x5D' > "$2"
-
-# Dictionary size can be either was power of two, bytes, kibibytes, or
-# mebibytes. We need to convert it to bytes.
-case $DICT in
-	*b)
-		DICT=${DICT%b}
-		;;
-	*k)
-		DICT=${DICT%k}
-		DICT=$((DICT << 10))
-		;;
-	*m)
-		DICT=${DICT%m}
-		DICT=$((DICT << 20))
-		;;
-	*)
-		DICT=$((1 << DICT))
-		;;
-esac
-int2bin 4 "$DICT" >> "$2"
-
-# Uncompressed size
-int2bin 8 "$USIZE" >> "$2"
-
-# Copy the actual compressed data. Using multiple dd commands to avoid
-# copying large amount of data with one-byte block size, which would be
-# annoyingly slow.
-BS=8192
-BIGSIZE=$((CSIZE / BS))
-CSIZE=$((CSIZE % BS))
-{
-	dd of=/dev/null bs=32 count=1 \
-		&& dd bs="$BS" count="$BIGSIZE" \
-		&& dd bs=1 count="$CSIZE"
-} < "$1" >> "$2"
-
-exit $?

package/deps/xz/extra/scanlzma/scanlzma.c

@@ -1,84 +0,0 @@
-/*
-    scanlzma, scan for lzma compressed data in stdin and echo it to stdout.
-    Copyright (C) 2006 Timo Lindfors
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
-
-/* Usage example:
-
-   $ wget http://www.wifi-shop.cz/Files/produkty/wa2204/wa2204av1.4.1.zip
-   $ unzip wa2204av1.4.1.zip
-   $ gcc scanlzma.c -o scanlzma -Wall
-   $ ./scanlzma 0 < WA2204-FW1.4.1/linux-1.4.bin | lzma -c -d | strings | grep -i "copyright"
-   UpdateDD version 2.5, Copyright (C) 2005 Philipp Benner.
-   Copyright (C) 2005 Philipp Benner.
-   Copyright (C) 2005 Philipp Benner.
-   mawk 1.3%s%s %s, Copyright (C) Michael D. Brennan
-   # Copyright (C) 1998, 1999, 2001  Henry Spencer.
-   ...
-
-*/
-
-
-/* LZMA compressed file format */
-/* --------------------------- */
-/* Offset Size Description */
-/*   0     1   Special LZMA properties for compressed data */
-/*   1     4   Dictionary size (little endian) */
-/*   5     8   Uncompressed size (little endian). -1 means unknown size */
-/*  13         Compressed data */
-
-#define BUFSIZE 4096
-
-int find_lzma_header(unsigned char *buf) {
-	return (buf[0] < 0xE1
-		&& buf[0] == 0x5d
-		&& buf[4] < 0x20
-		&& (memcmp (buf + 10 , "\x00\x00\x00", 3) == 0
-		    || (memcmp (buf + 5, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 8) == 0)));
-}
-
-int main(int argc, char *argv[]) {
-	char buf[BUFSIZE];
-	int ret, i, numlzma, blocks=0;
-
-	if (argc != 2) {
-		printf("usage: %s numlzma < infile | lzma -c -d > outfile\n"
-		       "where numlzma is index of lzma file to extract, starting from zero.\n",
-		       argv[0]);
-		exit(1);
-	}
-	numlzma = atoi(argv[1]);
-
-	for (;;) {
-		/* Read data. */
-		ret = fread(buf, BUFSIZE, 1, stdin);
-		if (ret != 1)
-			break;
-
-		/* Scan for signature. */
-		for (i = 0; i<BUFSIZE-23; i++) {
-			if (find_lzma_header(buf+i) && numlzma-- <= 0) {
-				fwrite(buf+i, (BUFSIZE-i), 1, stdout);
-				for (;;) {
-					int ch;
-					ch = getchar();
-					if (ch == EOF)
-						exit(0);
-					putchar(ch);
-				}
-			}
-		}
-		blocks++;
-	}
-	return 1;
-}