node-liblzma 1.0.4 → 1.1.4

package/deps/xz/src/liblzma/common/block_encoder.c

@@ -1,217 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       block_encoder.c
-/// \brief      Encodes .xz Blocks
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "block_encoder.h"
-#include "filter_encoder.h"
-#include "check.h"
-
-
-struct lzma_coder_s {
-	/// The filters in the chain; initialized with lzma_raw_decoder_init().
-	lzma_next_coder next;
-
-	/// Encoding options; we also write Unpadded Size, Compressed Size,
-	/// and Uncompressed Size back to this structure when the encoding
-	/// has been finished.
-	lzma_block *block;
-
-	enum {
-		SEQ_CODE,
-		SEQ_PADDING,
-		SEQ_CHECK,
-	} sequence;
-
-	/// Compressed Size calculated while encoding
-	lzma_vli compressed_size;
-
-	/// Uncompressed Size calculated while encoding
-	lzma_vli uncompressed_size;
-
-	/// Position in the Check field
-	size_t pos;
-
-	/// Check of the uncompressed data
-	lzma_check_state check;
-};
-
-
-static lzma_ret
-block_encode(lzma_coder *coder, const lzma_allocator *allocator,
-		const uint8_t *restrict in, size_t *restrict in_pos,
-		size_t in_size, uint8_t *restrict out,
-		size_t *restrict out_pos, size_t out_size, lzma_action action)
-{
-	// Check that our amount of input stays in proper limits.
-	if (LZMA_VLI_MAX - coder->uncompressed_size < in_size - *in_pos)
-		return LZMA_DATA_ERROR;
-
-	switch (coder->sequence) {
-	case SEQ_CODE: {
-		const size_t in_start = *in_pos;
-		const size_t out_start = *out_pos;
-
-		const lzma_ret ret = coder->next.code(coder->next.coder,
-				allocator, in, in_pos, in_size,
-				out, out_pos, out_size, action);
-
-		const size_t in_used = *in_pos - in_start;
-		const size_t out_used = *out_pos - out_start;
-
-		if (COMPRESSED_SIZE_MAX - coder->compressed_size < out_used)
-			return LZMA_DATA_ERROR;
-
-		coder->compressed_size += out_used;
-
-		// No need to check for overflow because we have already
-		// checked it at the beginning of this function.
-		coder->uncompressed_size += in_used;
-
-		lzma_check_update(&coder->check, coder->block->check,
-				in + in_start, in_used);
-
-		if (ret != LZMA_STREAM_END || action == LZMA_SYNC_FLUSH)
-			return ret;
-
-		assert(*in_pos == in_size);
-		assert(action == LZMA_FINISH);
-
-		// Copy the values into coder->block. The caller
-		// may use this information to construct Index.
-		coder->block->compressed_size = coder->compressed_size;
-		coder->block->uncompressed_size = coder->uncompressed_size;
-
-		coder->sequence = SEQ_PADDING;
-	}
-
-	// Fall through
-
-	case SEQ_PADDING:
-		// Pad Compressed Data to a multiple of four bytes. We can
-		// use coder->compressed_size for this since we don't need
-		// it for anything else anymore.
-		while (coder->compressed_size & 3) {
-			if (*out_pos >= out_size)
-				return LZMA_OK;
-
-			out[*out_pos] = 0x00;
-			++*out_pos;
-			++coder->compressed_size;
-		}
-
-		if (coder->block->check == LZMA_CHECK_NONE)
-			return LZMA_STREAM_END;
-
-		lzma_check_finish(&coder->check, coder->block->check);
-
-		coder->sequence = SEQ_CHECK;
-
-	// Fall through
-
-	case SEQ_CHECK: {
-		const size_t check_size = lzma_check_size(coder->block->check);
-		lzma_bufcpy(coder->check.buffer.u8, &coder->pos, check_size,
-				out, out_pos, out_size);
-		if (coder->pos < check_size)
-			return LZMA_OK;
-
-		memcpy(coder->block->raw_check, coder->check.buffer.u8,
-				check_size);
-		return LZMA_STREAM_END;
-	}
-	}
-
-	return LZMA_PROG_ERROR;
-}
-
-
-static void
-block_encoder_end(lzma_coder *coder, const lzma_allocator *allocator)
-{
-	lzma_next_end(&coder->next, allocator);
-	lzma_free(coder, allocator);
-	return;
-}
-
-
-static lzma_ret
-block_encoder_update(lzma_coder *coder, const lzma_allocator *allocator,
-		const lzma_filter *filters lzma_attribute((__unused__)),
-		const lzma_filter *reversed_filters)
-{
-	if (coder->sequence != SEQ_CODE)
-		return LZMA_PROG_ERROR;
-
-	return lzma_next_filter_update(
-			&coder->next, allocator, reversed_filters);
-}
-
-
-extern lzma_ret
-lzma_block_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator,
-		lzma_block *block)
-{
-	lzma_next_coder_init(&lzma_block_encoder_init, next, allocator);
-
-	if (block == NULL)
-		return LZMA_PROG_ERROR;
-
-	// The contents of the structure may depend on the version so
-	// check the version first.
-	if (block->version > 1)
-		return LZMA_OPTIONS_ERROR;
-
-	// If the Check ID is not supported, we cannot calculate the check and
-	// thus not create a proper Block.
-	if ((unsigned int)(block->check) > LZMA_CHECK_ID_MAX)
-		return LZMA_PROG_ERROR;
-
-	if (!lzma_check_is_supported(block->check))
-		return LZMA_UNSUPPORTED_CHECK;
-
-	// Allocate and initialize *next->coder if needed.
-	if (next->coder == NULL) {
-		next->coder = lzma_alloc(sizeof(lzma_coder), allocator);
-		if (next->coder == NULL)
-			return LZMA_MEM_ERROR;
-
-		next->code = &block_encode;
-		next->end = &block_encoder_end;
-		next->update = &block_encoder_update;
-		next->coder->next = LZMA_NEXT_CODER_INIT;
-	}
-
-	// Basic initializations
-	next->coder->sequence = SEQ_CODE;
-	next->coder->block = block;
-	next->coder->compressed_size = 0;
-	next->coder->uncompressed_size = 0;
-	next->coder->pos = 0;
-
-	// Initialize the check
-	lzma_check_init(&next->coder->check, block->check);
-
-	// Initialize the requested filters.
-	return lzma_raw_encoder_init(&next->coder->next, allocator,
-			block->filters);
-}
-
-
-extern LZMA_API(lzma_ret)
-lzma_block_encoder(lzma_stream *strm, lzma_block *block)
-{
-	lzma_next_strm_init(lzma_block_encoder_init, strm, block);
-
-	strm->internal->supported_actions[LZMA_RUN] = true;
-	strm->internal->supported_actions[LZMA_FINISH] = true;
-
-	return LZMA_OK;
-}

package/deps/xz/src/liblzma/common/block_encoder.h

@@ -1,47 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       block_encoder.h
-/// \brief      Encodes .xz Blocks
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_BLOCK_ENCODER_H
-#define LZMA_BLOCK_ENCODER_H
-
-#include "common.h"
-
-
-/// \brief      Biggest Compressed Size value that the Block encoder supports
-///
-/// The maximum size of a single Block is limited by the maximum size of
-/// a Stream, which in theory is 2^63 - 3 bytes (i.e. LZMA_VLI_MAX - 3).
-/// While the size is really big and no one should hit it in practice, we
-/// take it into account in some places anyway to catch some errors e.g. if
-/// application passes insanely big value to some function.
-///
-/// We could take into account the headers etc. to determine the exact
-/// maximum size of the Compressed Data field, but the complexity would give
-/// us nothing useful. Instead, limit the size of Compressed Data so that
-/// even with biggest possible Block Header and Check fields the total
-/// encoded size of the Block stays as a valid VLI. This doesn't guarantee
-/// that the size of the Stream doesn't grow too big, but that problem is
-/// taken care outside the Block handling code.
-///
-/// ~LZMA_VLI_C(3) is to guarantee that if we need padding at the end of
-/// the Compressed Data field, it will still stay in the proper limit.
-///
-/// This constant is in this file because it is needed in both
-/// block_encoder.c and block_buffer_encoder.c.
-#define COMPRESSED_SIZE_MAX ((LZMA_VLI_MAX - LZMA_BLOCK_HEADER_SIZE_MAX \
-		- LZMA_CHECK_SIZE_MAX) & ~LZMA_VLI_C(3))
-
-
-extern lzma_ret lzma_block_encoder_init(lzma_next_coder *next,
-		const lzma_allocator *allocator, lzma_block *block);
-
-#endif

package/deps/xz/src/liblzma/common/block_header_decoder.c

@@ -1,124 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       block_header_decoder.c
-/// \brief      Decodes Block Header from .xz files
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "common.h"
-#include "check.h"
-
-
-static void
-free_properties(lzma_block *block, const lzma_allocator *allocator)
-{
-	// Free allocated filter options. The last array member is not
-	// touched after the initialization in the beginning of
-	// lzma_block_header_decode(), so we don't need to touch that here.
-	for (size_t i = 0; i < LZMA_FILTERS_MAX; ++i) {
-		lzma_free(block->filters[i].options, allocator);
-		block->filters[i].id = LZMA_VLI_UNKNOWN;
-		block->filters[i].options = NULL;
-	}
-
-	return;
-}
-
-
-extern LZMA_API(lzma_ret)
-lzma_block_header_decode(lzma_block *block,
-		const lzma_allocator *allocator, const uint8_t *in)
-{
-	// NOTE: We consider the header to be corrupt not only when the
-	// CRC32 doesn't match, but also when variable-length integers
-	// are invalid or over 63 bits, or if the header is too small
-	// to contain the claimed information.
-
-	// Initialize the filter options array. This way the caller can
-	// safely free() the options even if an error occurs in this function.
-	for (size_t i = 0; i <= LZMA_FILTERS_MAX; ++i) {
-		block->filters[i].id = LZMA_VLI_UNKNOWN;
-		block->filters[i].options = NULL;
-	}
-
-	// Versions 0 and 1 are supported. If a newer version was specified,
-	// we need to downgrade it.
-	if (block->version > 1)
-		block->version = 1;
-
-	// This isn't a Block Header option, but since the decompressor will
-	// read it if version >= 1, it's better to initialize it here than
-	// to expect the caller to do it since in almost all cases this
-	// should be false.
-	block->ignore_check = false;
-
-	// Validate Block Header Size and Check type. The caller must have
-	// already set these, so it is a programming error if this test fails.
-	if (lzma_block_header_size_decode(in[0]) != block->header_size
-			|| (unsigned int)(block->check) > LZMA_CHECK_ID_MAX)
-		return LZMA_PROG_ERROR;
-
-	// Exclude the CRC32 field.
-	const size_t in_size = block->header_size - 4;
-
-	// Verify CRC32
-	if (lzma_crc32(in, in_size, 0) != unaligned_read32le(in + in_size))
-		return LZMA_DATA_ERROR;
-
-	// Check for unsupported flags.
-	if (in[1] & 0x3C)
-		return LZMA_OPTIONS_ERROR;
-
-	// Start after the Block Header Size and Block Flags fields.
-	size_t in_pos = 2;
-
-	// Compressed Size
-	if (in[1] & 0x40) {
-		return_if_error(lzma_vli_decode(&block->compressed_size,
-				NULL, in, &in_pos, in_size));
-
-		// Validate Compressed Size. This checks that it isn't zero
-		// and that the total size of the Block is a valid VLI.
-		if (lzma_block_unpadded_size(block) == 0)
-			return LZMA_DATA_ERROR;
-	} else {
-		block->compressed_size = LZMA_VLI_UNKNOWN;
-	}
-
-	// Uncompressed Size
-	if (in[1] & 0x80)
-		return_if_error(lzma_vli_decode(&block->uncompressed_size,
-				NULL, in, &in_pos, in_size));
-	else
-		block->uncompressed_size = LZMA_VLI_UNKNOWN;
-
-	// Filter Flags
-	const size_t filter_count = (in[1] & 3) + 1;
-	for (size_t i = 0; i < filter_count; ++i) {
-		const lzma_ret ret = lzma_filter_flags_decode(
-				&block->filters[i], allocator,
-				in, &in_pos, in_size);
-		if (ret != LZMA_OK) {
-			free_properties(block, allocator);
-			return ret;
-		}
-	}
-
-	// Padding
-	while (in_pos < in_size) {
-		if (in[in_pos++] != 0x00) {
-			free_properties(block, allocator);
-
-			// Possibly some new field present so use
-			// LZMA_OPTIONS_ERROR instead of LZMA_DATA_ERROR.
-			return LZMA_OPTIONS_ERROR;
-		}
-	}
-
-	return LZMA_OK;
-}

package/deps/xz/src/liblzma/common/block_header_encoder.c

@@ -1,132 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       block_header_encoder.c
-/// \brief      Encodes Block Header for .xz files
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "common.h"
-#include "check.h"
-
-
-extern LZMA_API(lzma_ret)
-lzma_block_header_size(lzma_block *block)
-{
-	if (block->version > 1)
-		return LZMA_OPTIONS_ERROR;
-
-	// Block Header Size + Block Flags + CRC32.
-	uint32_t size = 1 + 1 + 4;
-
-	// Compressed Size
-	if (block->compressed_size != LZMA_VLI_UNKNOWN) {
-		const uint32_t add = lzma_vli_size(block->compressed_size);
-		if (add == 0 || block->compressed_size == 0)
-			return LZMA_PROG_ERROR;
-
-		size += add;
-	}
-
-	// Uncompressed Size
-	if (block->uncompressed_size != LZMA_VLI_UNKNOWN) {
-		const uint32_t add = lzma_vli_size(block->uncompressed_size);
-		if (add == 0)
-			return LZMA_PROG_ERROR;
-
-		size += add;
-	}
-
-	// List of Filter Flags
-	if (block->filters == NULL || block->filters[0].id == LZMA_VLI_UNKNOWN)
-		return LZMA_PROG_ERROR;
-
-	for (size_t i = 0; block->filters[i].id != LZMA_VLI_UNKNOWN; ++i) {
-		// Don't allow too many filters.
-		if (i == LZMA_FILTERS_MAX)
-			return LZMA_PROG_ERROR;
-
-		uint32_t add;
-		return_if_error(lzma_filter_flags_size(&add,
-				block->filters + i));
-
-		size += add;
-	}
-
-	// Pad to a multiple of four bytes.
-	block->header_size = (size + 3) & ~UINT32_C(3);
-
-	// NOTE: We don't verify that the encoded size of the Block stays
-	// within limits. This is because it is possible that we are called
-	// with exaggerated Compressed Size (e.g. LZMA_VLI_MAX) to reserve
-	// space for Block Header, and later called again with lower,
-	// real values.
-
-	return LZMA_OK;
-}
-
-
-extern LZMA_API(lzma_ret)
-lzma_block_header_encode(const lzma_block *block, uint8_t *out)
-{
-	// Validate everything but filters.
-	if (lzma_block_unpadded_size(block) == 0
-			|| !lzma_vli_is_valid(block->uncompressed_size))
-		return LZMA_PROG_ERROR;
-
-	// Indicate the size of the buffer _excluding_ the CRC32 field.
-	const size_t out_size = block->header_size - 4;
-
-	// Store the Block Header Size.
-	out[0] = out_size / 4;
-
-	// We write Block Flags in pieces.
-	out[1] = 0x00;
-	size_t out_pos = 2;
-
-	// Compressed Size
-	if (block->compressed_size != LZMA_VLI_UNKNOWN) {
-		return_if_error(lzma_vli_encode(block->compressed_size, NULL,
-				out, &out_pos, out_size));
-
-		out[1] |= 0x40;
-	}
-
-	// Uncompressed Size
-	if (block->uncompressed_size != LZMA_VLI_UNKNOWN) {
-		return_if_error(lzma_vli_encode(block->uncompressed_size, NULL,
-				out, &out_pos, out_size));
-
-		out[1] |= 0x80;
-	}
-
-	// Filter Flags
-	if (block->filters == NULL || block->filters[0].id == LZMA_VLI_UNKNOWN)
-		return LZMA_PROG_ERROR;
-
-	size_t filter_count = 0;
-	do {
-		// There can be a maximum of four filters.
-		if (filter_count == LZMA_FILTERS_MAX)
-			return LZMA_PROG_ERROR;
-
-		return_if_error(lzma_filter_flags_encode(
-				block->filters + filter_count,
-				out, &out_pos, out_size));
-
-	} while (block->filters[++filter_count].id != LZMA_VLI_UNKNOWN);
-
-	out[1] |= filter_count - 1;
-
-	// Padding
-	memzero(out + out_pos, out_size - out_pos);
-
-	// CRC32
-	unaligned_write32le(out + out_size, lzma_crc32(out, out_size, 0));
-
-	return LZMA_OK;
-}

package/deps/xz/src/liblzma/common/block_util.c

@@ -1,90 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       block_header.c
-/// \brief      Utility functions to handle lzma_block
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "common.h"
-#include "index.h"
-
-
-extern LZMA_API(lzma_ret)
-lzma_block_compressed_size(lzma_block *block, lzma_vli unpadded_size)
-{
-	// Validate everything but Uncompressed Size and filters.
-	if (lzma_block_unpadded_size(block) == 0)
-		return LZMA_PROG_ERROR;
-
-	const uint32_t container_size = block->header_size
-			+ lzma_check_size(block->check);
-
-	// Validate that Compressed Size will be greater than zero.
-	if (unpadded_size <= container_size)
-		return LZMA_DATA_ERROR;
-
-	// Calculate what Compressed Size is supposed to be.
-	// If Compressed Size was present in Block Header,
-	// compare that the new value matches it.
-	const lzma_vli compressed_size = unpadded_size - container_size;
-	if (block->compressed_size != LZMA_VLI_UNKNOWN
-			&& block->compressed_size != compressed_size)
-		return LZMA_DATA_ERROR;
-
-	block->compressed_size = compressed_size;
-
-	return LZMA_OK;
-}
-
-
-extern LZMA_API(lzma_vli)
-lzma_block_unpadded_size(const lzma_block *block)
-{
-	// Validate the values that we are interested in i.e. all but
-	// Uncompressed Size and the filters.
-	//
-	// NOTE: This function is used for validation too, so it is
-	// essential that these checks are always done even if
-	// Compressed Size is unknown.
-	if (block == NULL || block->version > 1
-			|| block->header_size < LZMA_BLOCK_HEADER_SIZE_MIN
-			|| block->header_size > LZMA_BLOCK_HEADER_SIZE_MAX
-			|| (block->header_size & 3)
-			|| !lzma_vli_is_valid(block->compressed_size)
-			|| block->compressed_size == 0
-			|| (unsigned int)(block->check) > LZMA_CHECK_ID_MAX)
-		return 0;
-
-	// If Compressed Size is unknown, return that we cannot know
-	// size of the Block either.
-	if (block->compressed_size == LZMA_VLI_UNKNOWN)
-		return LZMA_VLI_UNKNOWN;
-
-	// Calculate Unpadded Size and validate it.
-	const lzma_vli unpadded_size = block->compressed_size
-				+ block->header_size
-				+ lzma_check_size(block->check);
-
-	assert(unpadded_size >= UNPADDED_SIZE_MIN);
-	if (unpadded_size > UNPADDED_SIZE_MAX)
-		return 0;
-
-	return unpadded_size;
-}
-
-
-extern LZMA_API(lzma_vli)
-lzma_block_total_size(const lzma_block *block)
-{
-	lzma_vli unpadded_size = lzma_block_unpadded_size(block);
-
-	if (unpadded_size != LZMA_VLI_UNKNOWN)
-		unpadded_size = vli_ceil4(unpadded_size);
-
-	return unpadded_size;
-}