mindforge-cc 8.2.0 → 9.0.0

package/.planning/archive/v8-cleanup/implementation-roadmap/v1.0.0/day-2-imp/DAY2-REVIEW.md

@@ -1,422 +0,0 @@
-# MindForge — Day 2 Review Prompt
-# Branch: `feat/mindforge-wave-engine`
-# Run this AFTER DAY2-IMPLEMENT.md is complete
-
----
-
-## CONTEXT
-
-You are performing a **Day 2 Architecture & Quality Review** of the MindForge
-wave execution engine, audit system, compaction protocol, and four new commands.
-
-Activate **`architect.md` + `qa-engineer.md` + `security-reviewer.md`** simultaneously.
-
-Day 2 introduced complex orchestration logic described in Markdown. The risk
-is not syntax errors — it is logical gaps: edge cases the engine specification
-doesn't handle, race conditions in the parallel model, and audit entries that
-could be missing for certain failure paths.
-
----
-
-## REVIEW PASS 1 — Wave Execution Engine: Logic Completeness
-
-### Dependency parser (`dependency-parser.md`)
-
-Read the full file. Answer every question. Flag anything unclear as a finding.
-
-- [ ] Does the parser handle an empty `<dependencies>` tag (no text content)?
-- [ ] Does the parser handle a PLAN file with no `<dependencies>` tag at all?
-- [ ] Does the parser handle a PLAN file with XML that has extra whitespace?
-- [ ] Does the circular dependency check handle self-referencing plans (`"01"` depends on `"01"`)?
-- [ ] Does the missing dependency check provide enough information to fix the problem?
-  (It should say which PLAN file is missing, not just which ID)
-- [ ] Does the file conflict check produce a concrete resolution (which wave each plan goes to)?
-- [ ] Does the output DEPENDENCY-GRAPH file include wave assignments, or just the dependency list?
-  (It must include wave assignments so execute-phase can read it without re-running the parser)
-
-**Critical logic gap to check:**
-What happens if two plans declare identical task names but different plan IDs?
-Is there any risk of confusion or duplicate SUMMARY file creation?
-Flag if not handled.
-
-### Wave executor (`wave-executor.md`)
-
-- [ ] Does the "before starting a wave" section specify what happens if a SUMMARY
-  file exists but shows a failed status? (Previous wave failed and was partially cleaned up)
-- [ ] Is the test-suite-run step between waves mandatory or optional?
-  It must be mandatory — skip it and a later wave can build on broken foundations.
-- [ ] What happens if the test suite itself does not exist yet (new project with no tests)?
-  Is there a graceful path, or does the engine crash?
-- [ ] Does the wave completion section clearly state that ALL plans in a wave must
-  complete before the test run? (Not just "most" — all.)
-- [ ] Is there a timeout concept? What if a subagent hangs indefinitely?
-  (Even a mention that "after [N] minutes without a SUMMARY file, flag to user" would suffice)
-- [ ] Does the WAVE-REPORT template include failures clearly, or only successes?
-  Failure rows must be visually distinct and include the error.
-
-**Specific question:**
-The executor says "spawn a subagent." In practice with Claude Code and Antigravity,
-this means using the Task tool or a specific subagent invocation pattern.
-Does the spec describe how to invoke this for both Claude Code and Antigravity?
-If not: flag as MAJOR — the executor will be interpreted differently by different runtimes.
-
-### Context injector (`context-injector.md`)
-
-- [ ] Is the context budget (30K tokens) validated before injection or just estimated?
-  "Estimate" without validation means the budget can be silently exceeded.
-- [ ] What happens when the ARCHITECTURE.md is very large and "relevant sections only"
-  is ambiguous? Define what "relevant" means — at minimum, which headings to include.
-- [ ] Does the injector specify how a subagent signals completion back to the orchestrator?
-  The current spec says "report completion status" but does not define the mechanism.
-  For Markdown-based agents: this is a file (SUMMARY.md). Confirm this is explicit.
-- [ ] Does the injector template include the SKILL.md trigger keywords so the subagent
-  can also load additional skills discovered during execution? Or is the skill set fixed
-  at injection time?
-- [ ] "Never inject STATE.md to subagents" — correct. But what about ROADMAP.md?
-  Is ROADMAP.md ever needed by a subagent? Should it also be in the "never inject" list?
-
-### Verification pipeline (`verification-pipeline.md`)
-
-- [ ] Stage 2 (requirement traceability) uses `grep` to find implementations.
-  What if the implementation uses a different term than the requirement text?
-  Is there a fallback when grep finds nothing? (Many false negatives are possible)
-- [ ] Stage 4 (security regression) activates the security-reviewer persona.
-  Does it specify which files to scan — only new/modified files, or the entire codebase?
-  Scanning the entire codebase is too slow. It should be diff-scoped.
-- [ ] Does VERIFICATION.md clearly distinguish between "not found by grep" (⚠️ ambiguous)
-  and "confirmed not implemented" (❌ certain)? These have different remediation urgencies.
-- [ ] What is the escalation path if Stage 1 (tests) fails at verification time?
-  Does the pipeline create fix plans automatically, or does it stop and wait?
-
----
-
-## REVIEW PASS 2 — AUDIT System: Coverage Completeness
-
-Read `AUDIT-SCHEMA.md`. Answer these questions:
-
-### Event coverage gaps
-Do the defined event types cover every significant agent action?
-Check each of these against the schema — flag any that are missing:
-
-- [ ] `phase_planned` — is this event defined?
-- [ ] `task_started` — is this event defined?
-- [ ] `task_completed` — is this event defined?
-- [ ] `task_failed` — is this event defined?
-- [ ] `security_finding` — is this event defined?
-- [ ] `quality_gate_failed` — is this event defined?
-- [ ] `context_compaction` — is this event defined?
-- [ ] `phase_completed` — is this event defined?
-- [ ] `decision_recorded` — is this event defined?
-- [ ] `quick_task_completed` — is this event defined?
-- [ ] `debug_completed` — is this event defined?
-- [ ] `project_initialised` — is this event defined?
-
-Missing events to add if not present:
-- `uat_started` — when verify-phase begins human testing
-- `uat_completed` — when UAT is signed off (or fails)
-- `ship_started` — when ship command begins
-- `ship_completed` — when a release PR is created
-- `session_started` — when a new agent session begins (reads HANDOFF.json)
-
-### AUDIT entry field consistency
-
-- [ ] Does every event type include the universal fields (`id`, `timestamp`, `event`, `agent`, `session_id`)?
-- [ ] Is `phase` consistently typed across all events? (number or null — never string "1")
-- [ ] Is the `id` field described as UUID v4 with a clear example?
-- [ ] Are there any events where `commit_sha` should be present but is not defined?
-
-### Append-only enforcement
-
-- [ ] Does the schema document state explicitly that no tooling or command should
-  ever read + rewrite the entire file (which would lose other entries)?
-- [ ] Is there guidance on what to do if AUDIT.jsonl becomes corrupted?
-  (Even a brief "restore from git history" note is sufficient)
-- [ ] Is there a note about AUDIT.jsonl file size growth over time?
-  A 6-month-old busy project could have thousands of entries. Is there an archiving strategy?
-
----
-
-## REVIEW PASS 3 — Compaction Protocol: Edge Case Coverage
-
-Read `compaction-protocol.md` completely. Check these edge cases:
-
-- [ ] **Compaction during a wave:** If compaction triggers mid-wave (while a subagent
-  is running), what happens to the in-flight subagent? Does it complete first,
-  or is it interrupted? The protocol must specify this.
-  Recommendation: Always let the current subagent complete before compacting.
-
-- [ ] **WIP commit quality:** The protocol creates WIP commits during compaction.
-  But the branch may have a pre-commit hook (lint, test). Does the compaction commit
-  bypass hooks? Should it? The protocol must address this.
-  Recommendation: WIP commits at compaction points bypass pre-commit hooks
-  (via `git commit --no-verify`) and are documented in STATE.md.
-
-- [ ] **Session restart conflict:** A new session reads HANDOFF.json and its
-  `next_task` says "continue Plan 03 from Step 4." But the developer has manually
-  committed some changes since the compaction. Does the restart protocol check
-  for this conflict?
-  Recommendation: Add "run git log and compare against recent_commits field
-  to detect any manual changes made between sessions."
-
-- [ ] **HANDOFF.json staleness:** What if HANDOFF.json was written 3 weeks ago and
-  much has changed since? Is there a staleness check?
-  Recommendation: "If `updated_at` is more than 48 hours old, warn the user
-  and confirm they want to continue from that state."
-
-- [ ] **Multiple concurrent sessions:** Can two agents read the same HANDOFF.json
-  and both try to continue? The protocol should note this risk.
-
----
-
-## REVIEW PASS 4 — New Commands: UX and Logic
-
-### `/mindforge:next` command
-
-- [ ] **Decision tree completeness:** Does the decision tree handle every valid
-  project state? Enumerate the states and check:
-  - [ ] No PROJECT.md → init-project ✓ (in spec?)
-  - [ ] PROJECT.md exists, no phases → plan-phase 1 ✓ (in spec?)
-  - [ ] Plans exist, no SUMMARY files → execute-phase ✓ (in spec?)
-  - [ ] All SUMMARY files exist, no VERIFICATION → verify-phase (automated) ✓?
-  - [ ] VERIFICATION exists, no UAT → verify-phase (UAT) ✓?
-  - [ ] UAT exists, not shipped → ship ✓?
-  - [ ] All phases shipped → next milestone? ✓?
-
-- [ ] Does "next" correctly advance phase numbers?
-  (When Phase 1 is complete, does it move to Phase 2 or try to re-run Phase 1?)
-
-- [ ] Does the HANDOFF.json check come BEFORE or AFTER the state detection tree?
-  (HANDOFF.json represents a specific interrupted state — it should take priority
-  over general state detection if it exists and is recent)
-
-### `/mindforge:quick` command
-
-- [ ] **Quick task numbering:** The spec uses a 3-digit sequential number (001, 002, ...).
-  How is the next number determined? Read `.planning/quick/` and count existing directories.
-  But what if two quick tasks are run in the same session? Will they both try to use "001"?
-  The spec must address how to avoid directory name collisions.
-
-- [ ] **Quick task scope enforcement:** The spec warns if a task seems "too big" but
-  still allows proceeding. Is this the right policy? A large "quick" task without
-  proper planning is risky. Consider: if the task would touch > 6 files, require
-  `--force` flag to proceed, making the override deliberate.
-
-- [ ] **Quick tasks and the phase state:** Does running a quick task update STATE.md?
-  If the phase is "in progress" when a quick task runs, STATE.md should not change.
-  If there is no active phase, STATE.md should note the quick task. Is this specified?
-
-- [ ] **Flags without --full:** The spec says `--full` adds "full test suite + linting."
-  But shouldn't linting always run even without `--full`? Committing unlinted code
-  from a quick task is exactly the kind of regression that makes codebases messy.
-  Recommendation: linting always runs. `--full` adds the test suite + security scan.
-
-### `/mindforge:status` command
-
-- [ ] **Phase progress calculation:** The spec calculates phase progress as
-  "tasks with SUMMARY files / total tasks in phase."
-  But a SUMMARY file exists for failed tasks too. Should failed tasks count as progress?
-  They should not. The calculation should be: SUMMARY files with `Status: Completed ✅`.
-
-- [ ] **Empty AUDIT.jsonl:** On a fresh project, AUDIT.jsonl is empty.
-  Does the status command handle this gracefully? (No "Recent Activity" section,
-  or "No activity logged yet" — either is fine, but it must not crash)
-
-- [ ] **Missing VERIFICATION.md:** On a phase in progress, VERIFICATION.md does not
-  exist yet. Does the requirements coverage section handle this gracefully?
-  It should show "In progress" rather than crashing.
-
-### `/mindforge:debug` command
-
-- [ ] **Intake vs. diagnosis:** The intake step asks 4 questions. What if the user
-  already provided all the information in their initial `/mindforge:debug` invocation?
-  Does the command re-ask questions they already answered?
-  Recommendation: Parse the initial description for answers before asking.
-
-- [ ] **Debug Specialist persona activation:** The command says "load
-  debug-specialist.md persona immediately." Does this mean the DEBUG command's
-  entire execution is in that persona, even the intake and reporting steps?
-  It should be — confirm this is unambiguous.
-
-- [ ] **When the fix introduces a new bug:** The protocol says step 9 is "verify —
-  the test from step 7 now passes, no regressions." But what if the fix passes the
-  new test but breaks an unrelated test? The debug protocol must include a full
-  test suite run after the fix, not just the newly-written test.
-
----
-
-## REVIEW PASS 5 — Test Suite Quality
-
-Read all three new test files.
-
-### `tests/wave-engine.test.js`
-
-- [ ] Does the test cover the 5-plan realistic diamond example? ✓ (should be there)
-- [ ] Does the test cover a plan with a dependency on a non-existent plan ID?
-  (Missing dependency detection — this should throw an error)
-- [ ] Does the test cover the empty graph (zero plans)?
-- [ ] Does the `findFileConflicts` test cover the case where 3+ plans touch the same file?
-- [ ] Are there any tests for the wave executor's "before starting a wave" validation?
-  (Checking that all previous wave plans have SUMMARY files with passing status)
-
-Missing tests to add if not present:
-```javascript
-test('handles empty graph (no plans)', () => {
-  const waves = groupIntoWaves({});
-  assert.deepStrictEqual(waves, []);
-});
-
-test('detects self-referencing dependency', () => {
-  const graph = { '01': { dependsOn: ['01'] } }; // depends on itself
-  assert.strictEqual(hasCircularDependency(graph), true);
-});
-
-test('three-plan file conflict', () => {
-  const plans = [
-    { id: '01', files: ['src/shared.ts'] },
-    { id: '02', files: ['src/shared.ts'] },
-    { id: '03', files: ['src/shared.ts'] },
-  ];
-  const conflicts = findFileConflicts(plans);
-  // At least 2 conflicts (01vs02, 01vs03 or 02vs03)
-  assert.ok(conflicts.length >= 2);
-});
-```
-
-### `tests/audit.test.js`
-
-- [ ] Does it test that AUDIT.jsonl with mixed valid/invalid lines is rejected correctly?
-- [ ] Does it test the `security_finding` event type specifically?
-- [ ] Does it test that a UUID with wrong format is rejected?
-
-### `tests/compaction.test.js`
-
-- [ ] Does it test that compaction-protocol.md mentions WIP commits?
-- [ ] Does it test that HANDOFF.json has a `recent_commits` field defined?
-- [ ] Does it test the `in_progress` field structure in HANDOFF.json?
-
----
-
-## REVIEW PASS 6 — Cross-Component Consistency
-
-Check that all Day 2 components are internally consistent with each other AND with Day 1.
-
-### Consistency checks (flag any mismatch as MAJOR)
-
-- [ ] `execute-phase.md` references the wave engine — do the referenced file paths match actual files?
-  - `.mindforge/engine/dependency-parser.md` ← exists?
-  - `.mindforge/engine/wave-executor.md` ← exists?
-  - `.mindforge/engine/context-injector.md` ← exists?
-  - `.mindforge/engine/verification-pipeline.md` ← exists?
-
-- [ ] `compaction-protocol.md` says to write HANDOFF.json with a specific schema.
-  Does the schema match the HANDOFF.json template in `init-project.md`?
-  Both must have identical field sets.
-
-- [ ] `AUDIT-SCHEMA.md` defines events. Does `execute-phase.md` write all the events
-  it is supposed to? Cross-check:
-  - [ ] `phase_execution_started` at step 2 of execute-phase
-  - [ ] `task_started` at subagent spawn time
-  - [ ] `task_completed` after each task
-  - [ ] `task_failed` on verify failure
-  - [ ] `quality_gate_failed` on test suite failure
-  - [ ] `phase_execution_completed` at phase end
-
-- [ ] CLAUDE.md (updated in Task 10) — does it reference the wave engine correctly?
-  Check that the file paths it references for the engine exist.
-
-- [ ] `next.md` decision tree — does "plans exist but no SUMMARY files → execute-phase"
-  correctly handle the case where some SUMMARY files exist (partial execution)?
-  This means a phase was partially executed. `next` should resume at the first plan
-  without a SUMMARY, not restart the entire phase.
-
----
-
-## REVIEW PASS 7 — Security Review
-
-Activate `security-reviewer.md` persona for this pass.
-
-### Audit log security
-- [ ] Is there any code path where an agent action could be taken WITHOUT writing
-  an audit entry? Map every AUDIT write in execute-phase.md against every possible
-  execution path. Any unaudited path is a governance gap.
-- [ ] Can the AUDIT.jsonl file be written to by anything other than the MindForge agent?
-  (In a CI environment, a compromised script could inject fake audit entries)
-  Note this risk if not already documented.
-- [ ] Could sensitive data end up in an AUDIT entry?
-  Check `task_started` — it includes `files_in_scope`. Could a file path expose
-  sensitive directory structure (e.g., `src/models/ssn-lookup.ts`)? Low risk but note.
-- [ ] The `decision_recorded` event includes `rationale`. Could a developer accidentally
-  paste credentials into a rationale? (e.g., "Used connection string: postgres://user:pass@...")
-  This is a documentation risk. Add a note to the schema.
-
-### Context injection security
-- [ ] The context injector injects SECURITY.md into every subagent.
-  But SECURITY.md is a template with placeholders on Day 1.
-  What if the user hasn't filled it in? Does an empty/template SECURITY.md mislead
-  the subagent into thinking security requirements are defined when they aren't?
-  Recommendation: Add a check in the context injector — if SECURITY.md contains
-  placeholder text, warn the user to fill it in.
-
-- [ ] The context injector injects ADR files referenced in plan `<context>` fields.
-  Could a malicious plan file reference `../../../etc/passwd` as an ADR path?
-  (This is a path traversal risk in the reference resolution)
-  Recommendation: Validate that all referenced files are within the project directory.
-
-### Quick task security
-- [ ] Does `quick.md` include a security check when the `--full` flag is used?
-  What about when the task is clearly security-sensitive (keywords: auth, password,
-  token, payment)? Should the security-review SKILL auto-trigger for quick tasks too?
-  It should. Add if missing.
-
----
-
-## REVIEW OUTPUT FORMAT
-
-```
-## Finding [N] — [Severity]: [Short title]
-
-**File:** [path/to/file.md, line N if identifiable]
-**Category:** [Wave Engine / Audit / Compaction / Commands / Tests / Consistency / Security]
-**Severity:** BLOCKING | MAJOR | MINOR | SUGGESTION
-
-**Issue:**
-[What is wrong or missing. Specific.]
-
-**Impact:**
-[What breaks if unfixed.]
-
-**Recommendation:**
-[Exact change to make.]
-```
-
----
-
-## REVIEW SUMMARY TABLE
-
-```
-## Day 2 Review Summary
-
-| Category      | BLOCKING | MAJOR | MINOR | SUGGESTION |
-|---------------|----------|-------|-------|------------|
-| Wave Engine   |          |       |       |            |
-| Audit System  |          |       |       |            |
-| Compaction    |          |       |       |            |
-| Commands      |          |       |       |            |
-| Test Suite    |          |       |       |            |
-| Consistency   |          |       |       |            |
-| Security      |          |       |       |            |
-| **TOTAL**     |          |       |       |            |
-
-## Verdict
-[ ] ✅ APPROVED — Proceed to DAY2-HARDEN.md
-[ ] ⚠️  APPROVED WITH CONDITIONS — Fix [N] major findings first
-[ ] ❌ NOT APPROVED — [N] blocking findings. Fix and re-review.
-
-## Estimated fix time
-[Realistic estimate]
-```
-
----
-
-**Branch:** `feat/mindforge-wave-engine`
-**All BLOCKING items resolved → proceed to DAY2-HARDEN.md**