koffi 0.9.4 → 0.9.5

package/vendor/dragonbox/subproject/3rdparty/schubfach/schubfach_64.h

@@ -1,31 +1,31 @@
-// Copyright 2020 Alexander Bolz
-//
-// Distributed under the Boost Software License, Version 1.0.
-//  (See accompanying file LICENSE_1_0.txt or copy at https://www.boost.org/LICENSE_1_0.txt)
-
-#pragma once
-
-namespace schubfach {
-
-// char* output_end = Dtoa(buffer, value);
-//
-// Converts the given double-precision number into decimal form and stores the result in the given
-// buffer.
-//
-// The buffer must be large enough, i.e. >= DtoaMinBufferLength.
-// The output format is similar to printf("%g").
-// The output is _not_ null-terminted.
-//
-// The output is optimal, i.e. the output string
-//  1. rounds back to the input number when read in (using round-to-nearest-even)
-//  2. is as short as possible,
-//  3. is as close to the input number as possible.
-//
-// Note:
-// This function may temporarily write up to DtoaMinBufferLength characters into the buffer.
-
-constexpr int DtoaMinBufferLength = 64;
-
-char* Dtoa(char* buffer, double value);
-
-} // namespace schubfach
+// Copyright 2020 Alexander Bolz
+//
+// Distributed under the Boost Software License, Version 1.0.
+//  (See accompanying file LICENSE_1_0.txt or copy at https://www.boost.org/LICENSE_1_0.txt)
+
+#pragma once
+
+namespace schubfach {
+
+// char* output_end = Dtoa(buffer, value);
+//
+// Converts the given double-precision number into decimal form and stores the result in the given
+// buffer.
+//
+// The buffer must be large enough, i.e. >= DtoaMinBufferLength.
+// The output format is similar to printf("%g").
+// The output is _not_ null-terminted.
+//
+// The output is optimal, i.e. the output string
+//  1. rounds back to the input number when read in (using round-to-nearest-even)
+//  2. is as short as possible,
+//  3. is as close to the input number as possible.
+//
+// Note:
+// This function may temporarily write up to DtoaMinBufferLength characters into the buffer.
+
+constexpr int DtoaMinBufferLength = 64;
+
+char* Dtoa(char* buffer, double value);
+
+} // namespace schubfach

package/vendor/dragonbox/subproject/3rdparty/shaded_plots/example_shaded_plots.m

@@ -1,68 +1,68 @@
-%% Shaded line plot
-% Example showing the difference between the standard plot routine and the
-% shaded routine
-
-x = -2*pi:pi/100:2*pi;
-fx = sin(x);
-
-figure('Color','w');
-subplot(1,2,1);
-hold on
-plot(x,fx);
-plot(2*x+pi/2,0.5*fx+0.1*x);
-hold off
-title('plot');
-
-subplot(1,2,2);
-hold on
-plot_shaded(x,fx);
-plot_shaded(2*x+pi/2,0.5*fx+0.1*x);
-hold off
-title('plot\_shaded');
-
-%% Histogram plot
-% Plots two histograms for two different distributions
-
-X1 = 3 + 2.0*randn([100000,1]);
-X2 = 12 + 4.0*randn([100000,1]);
-
-figure('Color','w');
-hold on
-plot_histogram_shaded(X1,'Alpha',0.3);
-plot_histogram_shaded(X2);
-hold off
-title('plot\_histogram\_shaded');
-
-
-%% Distribution plots
-% Show different plot routines to visualize measurement errors/noise
-
-X = 1:0.25:10;
-Y = sin(X)+0.25*X;
-Y_error = randn(1000,numel(Y));
-Y_noisy = Y+Y_error.*repmat(0.1*X,[size(Y_error,1) 1]);
-
-
-figure('Color','w');
-subplot(3,1,1);
-plot(X,Y,'LineWidth',1.5);
-title('plot (True value y=f(x))');
-ylim([-1 5]);
-
-subplot(3,1,2);
-hold on
-plot(X,Y,'LineWidth',1.5);
-plot_distribution(X,Y_noisy);
-hold off
-title('plot\_distribution');
-ylim([-1 5]);
-
-subplot(3,1,3);
-hold on
-plot(X,Y,'LineWidth',1.5);
-plot_distribution_prctile(X,Y_noisy,'Prctile',[25 50 75 90]);
-hold off
-title('plot\_distribution\_prctile');
-ylim([-1 5]);
-
-
+%% Shaded line plot
+% Example showing the difference between the standard plot routine and the
+% shaded routine
+
+x = -2*pi:pi/100:2*pi;
+fx = sin(x);
+
+figure('Color','w');
+subplot(1,2,1);
+hold on
+plot(x,fx);
+plot(2*x+pi/2,0.5*fx+0.1*x);
+hold off
+title('plot');
+
+subplot(1,2,2);
+hold on
+plot_shaded(x,fx);
+plot_shaded(2*x+pi/2,0.5*fx+0.1*x);
+hold off
+title('plot\_shaded');
+
+%% Histogram plot
+% Plots two histograms for two different distributions
+
+X1 = 3 + 2.0*randn([100000,1]);
+X2 = 12 + 4.0*randn([100000,1]);
+
+figure('Color','w');
+hold on
+plot_histogram_shaded(X1,'Alpha',0.3);
+plot_histogram_shaded(X2);
+hold off
+title('plot\_histogram\_shaded');
+
+
+%% Distribution plots
+% Show different plot routines to visualize measurement errors/noise
+
+X = 1:0.25:10;
+Y = sin(X)+0.25*X;
+Y_error = randn(1000,numel(Y));
+Y_noisy = Y+Y_error.*repmat(0.1*X,[size(Y_error,1) 1]);
+
+
+figure('Color','w');
+subplot(3,1,1);
+plot(X,Y,'LineWidth',1.5);
+title('plot (True value y=f(x))');
+ylim([-1 5]);
+
+subplot(3,1,2);
+hold on
+plot(X,Y,'LineWidth',1.5);
+plot_distribution(X,Y_noisy);
+hold off
+title('plot\_distribution');
+ylim([-1 5]);
+
+subplot(3,1,3);
+hold on
+plot(X,Y,'LineWidth',1.5);
+plot_distribution_prctile(X,Y_noisy,'Prctile',[25 50 75 90]);
+hold off
+title('plot\_distribution\_prctile');
+ylim([-1 5]);
+
+

package/vendor/dragonbox/subproject/3rdparty/shaded_plots/license.txt

@@ -1,25 +1,25 @@
-Copyright (c) 2018, John A. Onofrey
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice,
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution
-* Neither the name of Yale University nor the names of its
-  contributors may be used to endorse or promote products derived from this
-  software without specific prior written permission.
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+Copyright (c) 2018, John A. Onofrey
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution
+* Neither the name of Yale University nor the names of its
+  contributors may be used to endorse or promote products derived from this
+  software without specific prior written permission.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

package/vendor/dragonbox/subproject/3rdparty/shaded_plots/plot_distribution.m

@@ -1,92 +1,92 @@
-function plot_distribution(varargin)
-% PLOT_DISTRIBUTION(X,Y) - Plots the mean with standard deviation errors as a shaded region in the open 
-% figure window.
-% Inputs:
-%     X: vector of n domain values (the x-axis).
-%     Y: mxn matrix of distribution of range values (the y-axis), where m 
-%           corresponds to the number of data samples for each value n.
-%
-% PLOT_DISTRIBUTION(X,Y,...)
-% Parameter options include:
-%     'Alpha': the alpha value of the shaded region, default 0.15.
-%     'Color': the shaded region color.
-%     'LineWidth': the contour line width, default = 2.0.
-
-
-[X,Y,color_value,alpha_value,line_width] = parseinputs(varargin{:});
-
-
-MU = mean(Y);
-SIGMA = std(Y);
-
-hold on
-% Create the polygons for the shaded region
-
-Ptop = MU+SIGMA;
-Pbot = MU-SIGMA;
-
-for i=1:numel(X)-1
-    Px = [X(i) X(i+1) X(i+1) X(i)];
-    Py = [Ptop(i) Ptop(i+1) Pbot(i+1) Pbot(i)];
-    fill(Px,Py,color_value,'FaceAlpha',alpha_value,'EdgeColor','none');
-end
-
-plot(X,MU,'LineWidth',line_width,'Color',color_value);
-hold off
-
-end
-
-
-
-
-function [X,Y,color_value,alpha_value,line_width] = parseinputs(varargin)
-
-% Check the number of input args
-minargs = 2;
-numopts = 3;
-maxargs = minargs + 2*numopts;
-narginchk(minargs,maxargs);
-
-ax = gca;
-
-% Set the defaults
-alpha_value = 0.15;
-color_value = ax.ColorOrder(ax.ColorOrderIndex,:);
-line_width = 2.0;
-
-
-% Get the inputs and check them
-X = varargin{1};
-validateattributes(X,{'numeric'},{'vector','nonnan','finite'},mfilename,'X',2);
-Y = varargin{2};
-validateattributes(Y,{'numeric'},{'2d','nonnan','finite','ncols',numel(X)},mfilename,'Y',2);
-
-
-if nargin > minargs
-    for i=(minargs+1):2:nargin
-        PNAME = varargin{i};
-        PVALUE = varargin{i+1};
-        
-        PNAME = validatestring(PNAME,{'Alpha','Color','LineWidth','Prctile'},...
-            mfilename,'ParameterName',i);
-        
-        switch PNAME
-            case 'Alpha'
-                validateattributes(PVALUE,{'numeric'},{'scalar','nonnan','finite','nonnegative','<=',1.0},mfilename,PNAME,i+1);
-                alpha_value = PVALUE;
-            case 'Color'
-                validateattributes(PVALUE,{'numeric'},{'real','nonnegative','nonempty','vector','numel',3,'<=',1.0},mfilename,PNAME,i+1);
-                color_value = PVALUE;
-            case 'LineWidth'
-                validateattributes(PVALUE,{'numeric'},{'scalar','finite','nonnegative'},...
-                    mfilename,PNAME,i+1);
-                line_width = PVALUE;
-        end
-    end
-end
-
-end
-
-
-
-
+function plot_distribution(varargin)
+% PLOT_DISTRIBUTION(X,Y) - Plots the mean with standard deviation errors as a shaded region in the open 
+% figure window.
+% Inputs:
+%     X: vector of n domain values (the x-axis).
+%     Y: mxn matrix of distribution of range values (the y-axis), where m 
+%           corresponds to the number of data samples for each value n.
+%
+% PLOT_DISTRIBUTION(X,Y,...)
+% Parameter options include:
+%     'Alpha': the alpha value of the shaded region, default 0.15.
+%     'Color': the shaded region color.
+%     'LineWidth': the contour line width, default = 2.0.
+
+
+[X,Y,color_value,alpha_value,line_width] = parseinputs(varargin{:});
+
+
+MU = mean(Y);
+SIGMA = std(Y);
+
+hold on
+% Create the polygons for the shaded region
+
+Ptop = MU+SIGMA;
+Pbot = MU-SIGMA;
+
+for i=1:numel(X)-1
+    Px = [X(i) X(i+1) X(i+1) X(i)];
+    Py = [Ptop(i) Ptop(i+1) Pbot(i+1) Pbot(i)];
+    fill(Px,Py,color_value,'FaceAlpha',alpha_value,'EdgeColor','none');
+end
+
+plot(X,MU,'LineWidth',line_width,'Color',color_value);
+hold off
+
+end
+
+
+
+
+function [X,Y,color_value,alpha_value,line_width] = parseinputs(varargin)
+
+% Check the number of input args
+minargs = 2;
+numopts = 3;
+maxargs = minargs + 2*numopts;
+narginchk(minargs,maxargs);
+
+ax = gca;
+
+% Set the defaults
+alpha_value = 0.15;
+color_value = ax.ColorOrder(ax.ColorOrderIndex,:);
+line_width = 2.0;
+
+
+% Get the inputs and check them
+X = varargin{1};
+validateattributes(X,{'numeric'},{'vector','nonnan','finite'},mfilename,'X',2);
+Y = varargin{2};
+validateattributes(Y,{'numeric'},{'2d','nonnan','finite','ncols',numel(X)},mfilename,'Y',2);
+
+
+if nargin > minargs
+    for i=(minargs+1):2:nargin
+        PNAME = varargin{i};
+        PVALUE = varargin{i+1};
+        
+        PNAME = validatestring(PNAME,{'Alpha','Color','LineWidth','Prctile'},...
+            mfilename,'ParameterName',i);
+        
+        switch PNAME
+            case 'Alpha'
+                validateattributes(PVALUE,{'numeric'},{'scalar','nonnan','finite','nonnegative','<=',1.0},mfilename,PNAME,i+1);
+                alpha_value = PVALUE;
+            case 'Color'
+                validateattributes(PVALUE,{'numeric'},{'real','nonnegative','nonempty','vector','numel',3,'<=',1.0},mfilename,PNAME,i+1);
+                color_value = PVALUE;
+            case 'LineWidth'
+                validateattributes(PVALUE,{'numeric'},{'scalar','finite','nonnegative'},...
+                    mfilename,PNAME,i+1);
+                line_width = PVALUE;
+        end
+    end
+end
+
+end
+
+
+
+