edhoc 1.3.3 → 2.0.0

package/external/libedhoc/externals/mbedtls/include/mbedtls/hmac_drbg.h

@@ -1,434 +0,0 @@
-/**
- * \file hmac_drbg.h
- *
- * \brief The HMAC_DRBG pseudorandom generator.
- *
- * This module implements the HMAC_DRBG pseudorandom generator described
- * in <em>NIST SP 800-90A: Recommendation for Random Number Generation Using
- * Deterministic Random Bit Generators</em>.
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
- */
-#ifndef MBEDTLS_HMAC_DRBG_H
-#define MBEDTLS_HMAC_DRBG_H
-#include "mbedtls/private_access.h"
-
-#include "mbedtls/build_info.h"
-
-#include "mbedtls/md.h"
-
-#if defined(MBEDTLS_THREADING_C)
-#include "mbedtls/threading.h"
-#endif
-
-/*
- * Error codes
- */
-/** Too many random requested in single call. */
-#define MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG              -0x0003
-/** Input too large (Entropy + additional). */
-#define MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG                -0x0005
-/** Read/write error in file. */
-#define MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR                -0x0007
-/** The entropy source failed. */
-#define MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED        -0x0009
-
-/**
- * \name SECTION: Module settings
- *
- * The configuration options you can set for this module are in this section.
- * Either change them in mbedtls_config.h or define them on the compiler command line.
- * \{
- */
-
-#if !defined(MBEDTLS_HMAC_DRBG_RESEED_INTERVAL)
-#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL   10000   /**< Interval before reseed is performed by default */
-#endif
-
-#if !defined(MBEDTLS_HMAC_DRBG_MAX_INPUT)
-#define MBEDTLS_HMAC_DRBG_MAX_INPUT         256     /**< Maximum number of additional input bytes */
-#endif
-
-#if !defined(MBEDTLS_HMAC_DRBG_MAX_REQUEST)
-#define MBEDTLS_HMAC_DRBG_MAX_REQUEST       1024    /**< Maximum number of requested bytes per call */
-#endif
-
-#if !defined(MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT)
-#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT    384     /**< Maximum size of (re)seed buffer */
-#endif
-
-/** \} name SECTION: Module settings */
-
-#define MBEDTLS_HMAC_DRBG_PR_OFF   0   /**< No prediction resistance       */
-#define MBEDTLS_HMAC_DRBG_PR_ON    1   /**< Prediction resistance enabled  */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * HMAC_DRBG context.
- */
-typedef struct mbedtls_hmac_drbg_context {
-    /* Working state: the key K is not stored explicitly,
-     * but is implied by the HMAC context */
-    mbedtls_md_context_t MBEDTLS_PRIVATE(md_ctx);                    /*!< HMAC context (inc. K)  */
-    unsigned char MBEDTLS_PRIVATE(V)[MBEDTLS_MD_MAX_SIZE];  /*!< V in the spec          */
-    int MBEDTLS_PRIVATE(reseed_counter);                     /*!< reseed counter         */
-
-    /* Administrative state */
-    size_t MBEDTLS_PRIVATE(entropy_len);         /*!< entropy bytes grabbed on each (re)seed */
-    int MBEDTLS_PRIVATE(prediction_resistance);  /*!< enable prediction resistance (Automatic
-                                                    reseed before every random generation) */
-    int MBEDTLS_PRIVATE(reseed_interval);        /*!< reseed interval   */
-
-    /* Callbacks */
-    int(*MBEDTLS_PRIVATE(f_entropy))(void *, unsigned char *, size_t);  /*!< entropy function */
-    void *MBEDTLS_PRIVATE(p_entropy);            /*!< context for the entropy function        */
-
-#if defined(MBEDTLS_THREADING_C)
-    /* Invariant: the mutex is initialized if and only if
-     * md_ctx->md_info != NULL. This means that the mutex is initialized
-     * during the initial seeding in mbedtls_hmac_drbg_seed() or
-     * mbedtls_hmac_drbg_seed_buf() and freed in mbedtls_ctr_drbg_free().
-     *
-     * Note that this invariant may change without notice. Do not rely on it
-     * and do not access the mutex directly in application code.
-     */
-    mbedtls_threading_mutex_t MBEDTLS_PRIVATE(mutex);
-#endif
-} mbedtls_hmac_drbg_context;
-
-/**
- * \brief               HMAC_DRBG context initialization.
- *
- * This function makes the context ready for mbedtls_hmac_drbg_seed(),
- * mbedtls_hmac_drbg_seed_buf() or mbedtls_hmac_drbg_free().
- *
- * \note                The reseed interval is #MBEDTLS_HMAC_DRBG_RESEED_INTERVAL
- *                      by default. Override this value by calling
- *                      mbedtls_hmac_drbg_set_reseed_interval().
- *
- * \param ctx           HMAC_DRBG context to be initialized.
- */
-void mbedtls_hmac_drbg_init(mbedtls_hmac_drbg_context *ctx);
-
-/**
- * \brief               HMAC_DRBG initial seeding.
- *
- * Set the initial seed and set up the entropy source for future reseeds.
- *
- * A typical choice for the \p f_entropy and \p p_entropy parameters is
- * to use the entropy module:
- * - \p f_entropy is mbedtls_entropy_func();
- * - \p p_entropy is an instance of ::mbedtls_entropy_context initialized
- *   with mbedtls_entropy_init() (which registers the platform's default
- *   entropy sources).
- *
- * You can provide a personalization string in addition to the
- * entropy source, to make this instantiation as unique as possible.
- *
- * \note                By default, the security strength as defined by NIST is:
- *                      - 128 bits if \p md_info is SHA-1;
- *                      - 192 bits if \p md_info is SHA-224;
- *                      - 256 bits if \p md_info is SHA-256, SHA-384 or SHA-512.
- *                      Note that SHA-256 is just as efficient as SHA-224.
- *                      The security strength can be reduced if a smaller
- *                      entropy length is set with
- *                      mbedtls_hmac_drbg_set_entropy_len().
- *
- * \note                The default entropy length is the security strength
- *                      (converted from bits to bytes). You can override
- *                      it by calling mbedtls_hmac_drbg_set_entropy_len().
- *
- * \note                During the initial seeding, this function calls
- *                      the entropy source to obtain a nonce
- *                      whose length is half the entropy length.
- */
-#if defined(MBEDTLS_THREADING_C)
-/**
- * \note                When Mbed TLS is built with threading support,
- *                      after this function returns successfully,
- *                      it is safe to call mbedtls_hmac_drbg_random()
- *                      from multiple threads. Other operations, including
- *                      reseeding, are not thread-safe.
- */
-#endif /* MBEDTLS_THREADING_C */
-/**
- * \param ctx           HMAC_DRBG context to be seeded.
- * \param md_info       MD algorithm to use for HMAC_DRBG.
- * \param f_entropy     The entropy callback, taking as arguments the
- *                      \p p_entropy context, the buffer to fill, and the
- *                      length of the buffer.
- *                      \p f_entropy is always called with a length that is
- *                      less than or equal to the entropy length.
- * \param p_entropy     The entropy context to pass to \p f_entropy.
- * \param custom        The personalization string.
- *                      This can be \c NULL, in which case the personalization
- *                      string is empty regardless of the value of \p len.
- * \param len           The length of the personalization string.
- *                      This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
- *                      and also at most
- *                      #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \c entropy_len * 3 / 2
- *                      where \c entropy_len is the entropy length
- *                      described above.
- *
- * \return              \c 0 if successful.
- * \return              #MBEDTLS_ERR_MD_BAD_INPUT_DATA if \p md_info is
- *                      invalid.
- * \return              #MBEDTLS_ERR_MD_ALLOC_FAILED if there was not enough
- *                      memory to allocate context data.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
- *                      if the call to \p f_entropy failed.
- */
-int mbedtls_hmac_drbg_seed(mbedtls_hmac_drbg_context *ctx,
-                           const mbedtls_md_info_t *md_info,
-                           int (*f_entropy)(void *, unsigned char *, size_t),
-                           void *p_entropy,
-                           const unsigned char *custom,
-                           size_t len);
-
-/**
- * \brief               Initialisation of simplified HMAC_DRBG (never reseeds).
- *
- * This function is meant for use in algorithms that need a pseudorandom
- * input such as deterministic ECDSA.
- */
-#if defined(MBEDTLS_THREADING_C)
-/**
- * \note                When Mbed TLS is built with threading support,
- *                      after this function returns successfully,
- *                      it is safe to call mbedtls_hmac_drbg_random()
- *                      from multiple threads. Other operations, including
- *                      reseeding, are not thread-safe.
- */
-#endif /* MBEDTLS_THREADING_C */
-/**
- * \param ctx           HMAC_DRBG context to be initialised.
- * \param md_info       MD algorithm to use for HMAC_DRBG.
- * \param data          Concatenation of the initial entropy string and
- *                      the additional data.
- * \param data_len      Length of \p data in bytes.
- *
- * \return              \c 0 if successful. or
- * \return              #MBEDTLS_ERR_MD_BAD_INPUT_DATA if \p md_info is
- *                      invalid.
- * \return              #MBEDTLS_ERR_MD_ALLOC_FAILED if there was not enough
- *                      memory to allocate context data.
- */
-int mbedtls_hmac_drbg_seed_buf(mbedtls_hmac_drbg_context *ctx,
-                               const mbedtls_md_info_t *md_info,
-                               const unsigned char *data, size_t data_len);
-
-/**
- * \brief               This function turns prediction resistance on or off.
- *                      The default value is off.
- *
- * \note                If enabled, entropy is gathered at the beginning of
- *                      every call to mbedtls_hmac_drbg_random_with_add()
- *                      or mbedtls_hmac_drbg_random().
- *                      Only use this if your entropy source has sufficient
- *                      throughput.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param resistance    #MBEDTLS_HMAC_DRBG_PR_ON or #MBEDTLS_HMAC_DRBG_PR_OFF.
- */
-void mbedtls_hmac_drbg_set_prediction_resistance(mbedtls_hmac_drbg_context *ctx,
-                                                 int resistance);
-
-/**
- * \brief               This function sets the amount of entropy grabbed on each
- *                      seed or reseed.
- *
- * See the documentation of mbedtls_hmac_drbg_seed() for the default value.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param len           The amount of entropy to grab, in bytes.
- */
-void mbedtls_hmac_drbg_set_entropy_len(mbedtls_hmac_drbg_context *ctx,
-                                       size_t len);
-
-/**
- * \brief               Set the reseed interval.
- *
- * The reseed interval is the number of calls to mbedtls_hmac_drbg_random()
- * or mbedtls_hmac_drbg_random_with_add() after which the entropy function
- * is called again.
- *
- * The default value is #MBEDTLS_HMAC_DRBG_RESEED_INTERVAL.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param interval      The reseed interval.
- */
-void mbedtls_hmac_drbg_set_reseed_interval(mbedtls_hmac_drbg_context *ctx,
-                                           int interval);
-
-/**
- * \brief               This function updates the state of the HMAC_DRBG context.
- *
- * \note                This function is not thread-safe. It is not safe
- *                      to call this function if another thread might be
- *                      concurrently obtaining random numbers from the same
- *                      context or updating or reseeding the same context.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param additional    The data to update the state with.
- *                      If this is \c NULL, there is no additional data.
- * \param add_len       Length of \p additional in bytes.
- *                      Unused if \p additional is \c NULL.
- *
- * \return              \c 0 on success, or an error from the underlying
- *                      hash calculation.
- */
-int mbedtls_hmac_drbg_update(mbedtls_hmac_drbg_context *ctx,
-                             const unsigned char *additional, size_t add_len);
-
-/**
- * \brief               This function reseeds the HMAC_DRBG context, that is
- *                      extracts data from the entropy source.
- *
- * \note                This function is not thread-safe. It is not safe
- *                      to call this function if another thread might be
- *                      concurrently obtaining random numbers from the same
- *                      context or updating or reseeding the same context.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param additional    Additional data to add to the state.
- *                      If this is \c NULL, there is no additional data
- *                      and \p len should be \c 0.
- * \param len           The length of the additional data.
- *                      This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
- *                      and also at most
- *                      #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \c entropy_len
- *                      where \c entropy_len is the entropy length
- *                      (see mbedtls_hmac_drbg_set_entropy_len()).
- *
- * \return              \c 0 if successful.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
- *                      if a call to the entropy function failed.
- */
-int mbedtls_hmac_drbg_reseed(mbedtls_hmac_drbg_context *ctx,
-                             const unsigned char *additional, size_t len);
-
-/**
- * \brief   This function updates an HMAC_DRBG instance with additional
- *          data and uses it to generate random data.
- *
- * This function automatically reseeds if the reseed counter is exceeded
- * or prediction resistance is enabled.
- *
- * \note                This function is not thread-safe. It is not safe
- *                      to call this function if another thread might be
- *                      concurrently obtaining random numbers from the same
- *                      context or updating or reseeding the same context.
- *
- * \param p_rng         The HMAC_DRBG context. This must be a pointer to a
- *                      #mbedtls_hmac_drbg_context structure.
- * \param output        The buffer to fill.
- * \param output_len    The length of the buffer in bytes.
- *                      This must be at most #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
- * \param additional    Additional data to update with.
- *                      If this is \c NULL, there is no additional data
- *                      and \p add_len should be \c 0.
- * \param add_len       The length of the additional data.
- *                      This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT.
- *
- * \return              \c 0 if successful.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
- *                      if a call to the entropy source failed.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG if
- *                      \p output_len > #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG if
- *                      \p add_len > #MBEDTLS_HMAC_DRBG_MAX_INPUT.
- */
-int mbedtls_hmac_drbg_random_with_add(void *p_rng,
-                                      unsigned char *output, size_t output_len,
-                                      const unsigned char *additional,
-                                      size_t add_len);
-
-/**
- * \brief   This function uses HMAC_DRBG to generate random data.
- *
- * This function automatically reseeds if the reseed counter is exceeded
- * or prediction resistance is enabled.
- */
-#if defined(MBEDTLS_THREADING_C)
-/**
- * \note                When Mbed TLS is built with threading support,
- *                      it is safe to call mbedtls_ctr_drbg_random()
- *                      from multiple threads. Other operations, including
- *                      reseeding, are not thread-safe.
- */
-#endif /* MBEDTLS_THREADING_C */
-/**
- * \param p_rng         The HMAC_DRBG context. This must be a pointer to a
- *                      #mbedtls_hmac_drbg_context structure.
- * \param output        The buffer to fill.
- * \param out_len       The length of the buffer in bytes.
- *                      This must be at most #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
- *
- * \return              \c 0 if successful.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
- *                      if a call to the entropy source failed.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG if
- *                      \p out_len > #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
- */
-int mbedtls_hmac_drbg_random(void *p_rng, unsigned char *output, size_t out_len);
-
-/**
- * \brief               This function resets HMAC_DRBG context to the state immediately
- *                      after initial call of mbedtls_hmac_drbg_init().
- *
- * \param ctx           The HMAC_DRBG context to free.
- */
-void mbedtls_hmac_drbg_free(mbedtls_hmac_drbg_context *ctx);
-
-#if defined(MBEDTLS_FS_IO)
-/**
- * \brief               This function writes a seed file.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param path          The name of the file.
- *
- * \return              \c 0 on success.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR on file error.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED on reseed
- *                      failure.
- */
-int mbedtls_hmac_drbg_write_seed_file(mbedtls_hmac_drbg_context *ctx, const char *path);
-
-/**
- * \brief               This function reads and updates a seed file. The seed
- *                      is added to this instance.
- *
- * \param ctx           The HMAC_DRBG context.
- * \param path          The name of the file.
- *
- * \return              \c 0 on success.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR on file error.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED on
- *                      reseed failure.
- * \return              #MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG if the existing
- *                      seed file is too large.
- */
-int mbedtls_hmac_drbg_update_seed_file(mbedtls_hmac_drbg_context *ctx, const char *path);
-#endif /* MBEDTLS_FS_IO */
-
-
-#if defined(MBEDTLS_SELF_TEST)
-/**
- * \brief               The HMAC_DRBG Checkup routine.
- *
- * \return              \c 0 if successful.
- * \return              \c 1 if the test failed.
- */
-int mbedtls_hmac_drbg_self_test(int verbose);
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* hmac_drbg.h */