edhoc 1.3.3 → 2.0.0

package/external/libedhoc/externals/mbedtls/include/mbedtls/build_info.h

@@ -1,146 +0,0 @@
-/**
- * \file mbedtls/build_info.h
- *
- * \brief Build-time configuration info
- *
- *  Include this file if you need to depend on the
- *  configuration options defined in mbedtls_config.h or MBEDTLS_CONFIG_FILE
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
- */
-
-#ifndef MBEDTLS_BUILD_INFO_H
-#define MBEDTLS_BUILD_INFO_H
-
-/*
- * This set of compile-time defines can be used to determine the version number
- * of the Mbed TLS library used. Run-time variables for the same can be found in
- * version.h
- */
-
-/**
- * The version number x.y.z is split into three parts.
- * Major, Minor, Patchlevel
- */
-#define MBEDTLS_VERSION_MAJOR  3
-#define MBEDTLS_VERSION_MINOR  5
-#define MBEDTLS_VERSION_PATCH  1
-
-/**
- * The single version number has the following structure:
- *    MMNNPP00
- *    Major version | Minor version | Patch version
- */
-#define MBEDTLS_VERSION_NUMBER         0x03050100
-#define MBEDTLS_VERSION_STRING         "3.5.1"
-#define MBEDTLS_VERSION_STRING_FULL    "Mbed TLS 3.5.1"
-
-/* Macros for build-time platform detection */
-
-#if !defined(MBEDTLS_ARCH_IS_ARM64) && \
-    (defined(__aarch64__) || defined(_M_ARM64) || defined(_M_ARM64EC))
-#define MBEDTLS_ARCH_IS_ARM64
-#endif
-
-#if !defined(MBEDTLS_ARCH_IS_ARM32) && \
-    (defined(__arm__) || defined(_M_ARM) || \
-    defined(_M_ARMT) || defined(__thumb__) || defined(__thumb2__))
-#define MBEDTLS_ARCH_IS_ARM32
-#endif
-
-#if !defined(MBEDTLS_ARCH_IS_X64) && \
-    (defined(__amd64__) || defined(__x86_64__) || \
-    ((defined(_M_X64) || defined(_M_AMD64)) && !defined(_M_ARM64EC)))
-#define MBEDTLS_ARCH_IS_X64
-#endif
-
-#if !defined(MBEDTLS_ARCH_IS_X86) && \
-    (defined(__i386__) || defined(_X86_) || \
-    (defined(_M_IX86) && !defined(_M_I86)))
-#define MBEDTLS_ARCH_IS_X86
-#endif
-
-#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
-#define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-
-/* Define `inline` on some non-C99-compliant compilers. */
-#if (defined(__ARMCC_VERSION) || defined(_MSC_VER)) && \
-    !defined(inline) && !defined(__cplusplus)
-#define inline __inline
-#endif
-
-/* X.509, TLS and non-PSA crypto configuration */
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/mbedtls_config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#if defined(MBEDTLS_CONFIG_VERSION) && ( \
-    MBEDTLS_CONFIG_VERSION < 0x03000000 || \
-                             MBEDTLS_CONFIG_VERSION > MBEDTLS_VERSION_NUMBER)
-#error "Invalid config version, defined value of MBEDTLS_CONFIG_VERSION is unsupported"
-#endif
-
-/* Target and application specific configurations
- *
- * Allow user to override any previous default.
- *
- */
-#if defined(MBEDTLS_USER_CONFIG_FILE)
-#include MBEDTLS_USER_CONFIG_FILE
-#endif
-
-/* PSA crypto configuration */
-#if defined(MBEDTLS_PSA_CRYPTO_CONFIG)
-#if defined(MBEDTLS_PSA_CRYPTO_CONFIG_FILE)
-#include MBEDTLS_PSA_CRYPTO_CONFIG_FILE
-#else
-#include "psa/crypto_config.h"
-#endif
-#if defined(MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE)
-#include MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE
-#endif
-#endif /* defined(MBEDTLS_PSA_CRYPTO_CONFIG) */
-
-/* Auto-enable MBEDTLS_CTR_DRBG_USE_128_BIT_KEY if
- * MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH and MBEDTLS_CTR_DRBG_C defined
- * to ensure a 128-bit key size in CTR_DRBG.
- */
-#if defined(MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH) && defined(MBEDTLS_CTR_DRBG_C)
-#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
-#endif
-
-/* Auto-enable MBEDTLS_MD_C if needed by a module that didn't require it
- * in a previous release, to ensure backwards compatibility.
- */
-#if defined(MBEDTLS_PKCS5_C)
-#define MBEDTLS_MD_C
-#endif
-
-/* PSA crypto specific configuration options
- * - If config_psa.h reads a configuration option in preprocessor directive,
- *   this symbol should be set before its inclusion. (e.g. MBEDTLS_MD_C)
- * - If config_psa.h writes a configuration option in conditional directive,
- *   this symbol should be consulted after its inclusion.
- *   (e.g. MBEDTLS_MD_LIGHT)
- */
-#if defined(MBEDTLS_PSA_CRYPTO_CONFIG) /* PSA_WANT_xxx influences MBEDTLS_xxx */ || \
-    defined(MBEDTLS_PSA_CRYPTO_C) /* MBEDTLS_xxx influences PSA_WANT_xxx */
-#include "mbedtls/config_psa.h"
-#endif
-
-#include "mbedtls/config_adjust_legacy_crypto.h"
-
-#include "mbedtls/config_adjust_x509.h"
-
-#include "mbedtls/config_adjust_ssl.h"
-
-/* Make sure all configuration symbols are set before including check_config.h,
- * even the ones that are calculated programmatically. */
-#include "mbedtls/check_config.h"
-
-#endif /* MBEDTLS_BUILD_INFO_H */

package/external/libedhoc/externals/mbedtls/include/mbedtls/camellia.h

@@ -1,303 +0,0 @@
-/**
- * \file camellia.h
- *
- * \brief Camellia block cipher
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
- */
-#ifndef MBEDTLS_CAMELLIA_H
-#define MBEDTLS_CAMELLIA_H
-#include "mbedtls/private_access.h"
-
-#include "mbedtls/build_info.h"
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include "mbedtls/platform_util.h"
-
-#define MBEDTLS_CAMELLIA_ENCRYPT     1
-#define MBEDTLS_CAMELLIA_DECRYPT     0
-
-/** Bad input data. */
-#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024
-
-/** Invalid data input length. */
-#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if !defined(MBEDTLS_CAMELLIA_ALT)
-// Regular implementation
-//
-
-/**
- * \brief          CAMELLIA context structure
- */
-typedef struct mbedtls_camellia_context {
-    int MBEDTLS_PRIVATE(nr);                     /*!<  number of rounds  */
-    uint32_t MBEDTLS_PRIVATE(rk)[68];            /*!<  CAMELLIA round keys    */
-}
-mbedtls_camellia_context;
-
-#else  /* MBEDTLS_CAMELLIA_ALT */
-#include "camellia_alt.h"
-#endif /* MBEDTLS_CAMELLIA_ALT */
-
-/**
- * \brief          Initialize a CAMELLIA context.
- *
- * \param ctx      The CAMELLIA context to be initialized.
- *                 This must not be \c NULL.
- */
-void mbedtls_camellia_init(mbedtls_camellia_context *ctx);
-
-/**
- * \brief          Clear a CAMELLIA context.
- *
- * \param ctx      The CAMELLIA context to be cleared. This may be \c NULL,
- *                 in which case this function returns immediately. If it is not
- *                 \c NULL, it must be initialized.
- */
-void mbedtls_camellia_free(mbedtls_camellia_context *ctx);
-
-/**
- * \brief          Perform a CAMELLIA key schedule operation for encryption.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized.
- * \param key      The encryption key to use. This must be a readable buffer
- *                 of size \p keybits Bits.
- * \param keybits  The length of \p key in Bits. This must be either \c 128,
- *                 \c 192 or \c 256.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_setkey_enc(mbedtls_camellia_context *ctx,
-                                const unsigned char *key,
-                                unsigned int keybits);
-
-/**
- * \brief          Perform a CAMELLIA key schedule operation for decryption.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized.
- * \param key      The decryption key. This must be a readable buffer
- *                 of size \p keybits Bits.
- * \param keybits  The length of \p key in Bits. This must be either \c 128,
- *                 \c 192 or \c 256.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_setkey_dec(mbedtls_camellia_context *ctx,
-                                const unsigned char *key,
-                                unsigned int keybits);
-
-/**
- * \brief          Perform a CAMELLIA-ECB block encryption/decryption operation.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param input    The input block. This must be a readable buffer
- *                 of size \c 16 Bytes.
- * \param output   The output block. This must be a writable buffer
- *                 of size \c 16 Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_ecb(mbedtls_camellia_context *ctx,
-                               int mode,
-                               const unsigned char input[16],
-                               unsigned char output[16]);
-
-#if defined(MBEDTLS_CIPHER_MODE_CBC)
-/**
- * \brief          Perform a CAMELLIA-CBC buffer encryption/decryption operation.
- *
- * \note           Upon exit, the content of the IV is updated so that you can
- *                 call the function same function again on the following
- *                 block(s) of data and get the same result as if it was
- *                 encrypted in one call. This allows a "streaming" usage.
- *                 If on the other hand you need to retain the contents of the
- *                 IV, you should either save it manually or use the cipher
- *                 module instead.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param length   The length in Bytes of the input data \p input.
- *                 This must be a multiple of \c 16 Bytes.
- * \param iv       The initialization vector. This must be a read/write buffer
- *                 of length \c 16 Bytes. It is updated to allow streaming
- *                 use as explained above.
- * \param input    The buffer holding the input data. This must point to a
- *                 readable buffer of length \p length Bytes.
- * \param output   The buffer holding the output data. This must point to a
- *                 writable buffer of length \p length Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_cbc(mbedtls_camellia_context *ctx,
-                               int mode,
-                               size_t length,
-                               unsigned char iv[16],
-                               const unsigned char *input,
-                               unsigned char *output);
-#endif /* MBEDTLS_CIPHER_MODE_CBC */
-
-#if defined(MBEDTLS_CIPHER_MODE_CFB)
-/**
- * \brief          Perform a CAMELLIA-CFB128 buffer encryption/decryption
- *                 operation.
- *
- * \note           Due to the nature of CFB mode, you should use the same
- *                 key for both encryption and decryption. In particular, calls
- *                 to this function should be preceded by a key-schedule via
- *                 mbedtls_camellia_setkey_enc() regardless of whether \p mode
- *                 is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- *
- * \note           Upon exit, the content of the IV is updated so that you can
- *                 call the function same function again on the following
- *                 block(s) of data and get the same result as if it was
- *                 encrypted in one call. This allows a "streaming" usage.
- *                 If on the other hand you need to retain the contents of the
- *                 IV, you should either save it manually or use the cipher
- *                 module instead.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param length   The length of the input data \p input. Any value is allowed.
- * \param iv_off   The current offset in the IV. This must be smaller
- *                 than \c 16 Bytes. It is updated after this call to allow
- *                 the aforementioned streaming usage.
- * \param iv       The initialization vector. This must be a read/write buffer
- *                 of length \c 16 Bytes. It is updated after this call to
- *                 allow the aforementioned streaming usage.
- * \param input    The buffer holding the input data. This must be a readable
- *                 buffer of size \p length Bytes.
- * \param output   The buffer to hold the output data. This must be a writable
- *                 buffer of length \p length Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_cfb128(mbedtls_camellia_context *ctx,
-                                  int mode,
-                                  size_t length,
-                                  size_t *iv_off,
-                                  unsigned char iv[16],
-                                  const unsigned char *input,
-                                  unsigned char *output);
-#endif /* MBEDTLS_CIPHER_MODE_CFB */
-
-#if defined(MBEDTLS_CIPHER_MODE_CTR)
-/**
- * \brief      Perform a CAMELLIA-CTR buffer encryption/decryption operation.
- *
- * *note       Due to the nature of CTR mode, you should use the same
- *             key for both encryption and decryption. In particular, calls
- *             to this function should be preceded by a key-schedule via
- *             mbedtls_camellia_setkey_enc() regardless of whether the mode
- *             is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- *
- * \warning    You must never reuse a nonce value with the same key. Doing so
- *             would void the encryption for the two messages encrypted with
- *             the same nonce and key.
- *
- *             There are two common strategies for managing nonces with CTR:
- *
- *             1. You can handle everything as a single message processed over
- *             successive calls to this function. In that case, you want to
- *             set \p nonce_counter and \p nc_off to 0 for the first call, and
- *             then preserve the values of \p nonce_counter, \p nc_off and \p
- *             stream_block across calls to this function as they will be
- *             updated by this function.
- *
- *             With this strategy, you must not encrypt more than 2**128
- *             blocks of data with the same key.
- *
- *             2. You can encrypt separate messages by dividing the \p
- *             nonce_counter buffer in two areas: the first one used for a
- *             per-message nonce, handled by yourself, and the second one
- *             updated by this function internally.
- *
- *             For example, you might reserve the first \c 12 Bytes for the
- *             per-message nonce, and the last \c 4 Bytes for internal use.
- *             In that case, before calling this function on a new message you
- *             need to set the first \c 12 Bytes of \p nonce_counter to your
- *             chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
- *             (which will cause \p stream_block to be ignored). That way, you
- *             can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
- *             each  with the same key.
- *
- *             The per-message nonce (or information sufficient to reconstruct
- *             it) needs to be communicated with the ciphertext and must be
- *             unique. The recommended way to ensure uniqueness is to use a
- *             message counter. An alternative is to generate random nonces,
- *             but this limits the number of messages that can be securely
- *             encrypted: for example, with 96-bit random nonces, you should
- *             not encrypt more than 2**32 messages with the same key.
- *
- *             Note that for both strategies, sizes are measured in blocks and
- *             that a CAMELLIA block is \c 16 Bytes.
- *
- * \warning    Upon return, \p stream_block contains sensitive data. Its
- *             content must not be written to insecure storage and should be
- *             securely discarded as soon as it's no longer needed.
- *
- * \param ctx           The CAMELLIA context to use. This must be initialized
- *                      and bound to a key.
- * \param length        The length of the input data \p input in Bytes.
- *                      Any value is allowed.
- * \param nc_off        The offset in the current \p stream_block (for resuming
- *                      within current cipher stream). The offset pointer to
- *                      should be \c 0 at the start of a stream. It is updated
- *                      at the end of this call.
- * \param nonce_counter The 128-bit nonce and counter. This must be a read/write
- *                      buffer of length \c 16 Bytes.
- * \param stream_block  The saved stream-block for resuming. This must be a
- *                      read/write buffer of length \c 16 Bytes.
- * \param input         The input data stream. This must be a readable buffer of
- *                      size \p length Bytes.
- * \param output        The output data stream. This must be a writable buffer
- *                      of size \p length Bytes.
- *
- * \return              \c 0 if successful.
- * \return              A negative error code on failure.
- */
-int mbedtls_camellia_crypt_ctr(mbedtls_camellia_context *ctx,
-                               size_t length,
-                               size_t *nc_off,
-                               unsigned char nonce_counter[16],
-                               unsigned char stream_block[16],
-                               const unsigned char *input,
-                               unsigned char *output);
-#endif /* MBEDTLS_CIPHER_MODE_CTR */
-
-#if defined(MBEDTLS_SELF_TEST)
-
-/**
- * \brief          Checkup routine
- *
- * \return         0 if successful, or 1 if the test failed
- */
-int mbedtls_camellia_self_test(int verbose);
-
-#endif /* MBEDTLS_SELF_TEST */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* camellia.h */