bmad-method 6.0.0-alpha.9 → 6.0.2

package/docs/ide-info/kilo.md

@@ -1,24 +0,0 @@
-# BMAD Method - KiloCode Instructions
-
-## Activating Agents
-
-BMAD agents are installed as custom modes in `.kilocodemodes`.
-
-### How to Use
-
-1. **Open Project**: Modes auto-load when project opens
-2. **Select Mode**: Use mode selector in KiloCode interface
-3. **Choose Agent**: Pick `bmad-{module}-{agent}` mode
-4. **Activate**: Mode is now active
-
-### Mode Format
-
-- Mode name: `bmad-{module}-{agent}`
-- Display: `{icon} {title}`
-- Example: `bmad-core-dev` shows as `🤖 Dev`
-
-### Notes
-
-- Modes persist until changed
-- Similar to Roo Code mode system
-- Icon shows in mode selector

package/docs/ide-info/opencode.md

@@ -1,24 +0,0 @@
-# BMAD Method - OpenCode Instructions
-
-## Activating Agents
-
-BMAD agents are installed as OpenCode agents in `.opencode/agent/BMAD/{module_name}` and workflow commands in `.opencode/command/BMAD/{module_name}`.
-
-### How to Use
-
-1. **Switch Agents**: Press **Tab** to cycle through primary agents or select using the `/agents`
-2. **Activate Agent**: Once the Agent is selected say `hello` or any prompt to activate that agent persona
-3. **Execute Commands**: Type `/bmad` to see and execute bmad workflow commands (commands allow for fuzzy matching)
-
-### Examples
-
-```
-/agents - to see a list of agents and switch between them
-/{bmad_folder}/bmm/workflows/workflow-init - Activate the workflow-init command
-```
-
-### Notes
-
-- Press **Tab** to switch between primary agents (Analyst, Architect, Dev, etc.)
-- Commands are autocompleted when you type `/` and allow for fuzzy matching
-- Workflow commands execute in current agent context, make sure you have the right agent activated before running a command

package/docs/ide-info/qwen.md

@@ -1,25 +0,0 @@
-# BMAD Method - Qwen Code Instructions
-
-## Activating Agents
-
-BMAD agents are concatenated in `.qwen/bmad-method/QWEN.md`.
-
-### How to Use
-
-1. **Type Trigger**: Use `*{agent-name}` in your prompt
-2. **Activate**: Agent persona activates from the concatenated file
-3. **Continue**: Agent remains active for conversation
-
-### Examples
-
-```
-*dev - Activate development agent
-*architect - Activate architect agent
-*test - Activate test agent
-```
-
-### Notes
-
-- All agents loaded from single QWEN.md file
-- Triggers with asterisk: `*{agent-name}`
-- Similar to Gemini CLI setup

package/docs/ide-info/roo.md

@@ -1,27 +0,0 @@
-# BMAD Method - Roo Code Instructions
-
-## Activating Agents
-
-BMAD agents are installed as custom modes in `.roomodes`.
-
-### How to Use
-
-1. **Open Project**: Modes auto-load when project opens
-2. **Select Mode**: Use mode selector in Roo interface
-3. **Choose Agent**: Pick `bmad-{module}-{agent}` mode
-4. **Activate**: Mode is now active with configured permissions
-
-### Permission Levels
-
-Modes are configured with file edit permissions:
-
-- Development files only
-- Configuration files only
-- Documentation files only
-- All files (if configured)
-
-### Notes
-
-- Modes persist until changed
-- Each mode has specific file access rights
-- Icon shows in mode selector for easy identification

package/docs/ide-info/trae.md

@@ -1,25 +0,0 @@
-# BMAD Method - Trae Instructions
-
-## Activating Agents
-
-BMAD agents are installed as rules in `.trae/rules/`.
-
-### How to Use
-
-1. **Type Trigger**: Use `@{agent-name}` in your prompt
-2. **Activate**: Agent persona activates automatically
-3. **Continue**: Agent remains active for conversation
-
-### Examples
-
-```
-@dev - Activate development agent
-@architect - Activate architect agent
-@task-setup - Execute setup task
-```
-
-### Notes
-
-- Rules auto-load from `.trae/rules/` directory
-- Multiple agents can be referenced: `@dev and @test`
-- Agent follows YAML configuration in rule file

package/docs/ide-info/windsurf.md

@@ -1,22 +0,0 @@
-# BMAD Method - Windsurf Instructions
-
-## Activating Agents
-
-BMAD agents are installed as workflows in `.windsurf/workflows/`.
-
-### How to Use
-
-1. **Open Workflows**: Access via Windsurf menu or command palette
-2. **Select Workflow**: Choose the agent/task workflow
-3. **Execute**: Run to activate that agent persona
-
-### Workflow Types
-
-- **Agent workflows**: `{module}-{agent}.md` (auto_execution_mode: 3)
-- **Task workflows**: `task-{module}-{task}.md` (auto_execution_mode: 2)
-
-### Notes
-
-- Agents run with higher autonomy (mode 3)
-- Tasks run with guided execution (mode 2)
-- Workflows persist for the session

package/docs/installers-bundlers/ide-injections.md

@@ -1,186 +0,0 @@
-# IDE Content Injection Standard
-
-## Overview
-
-This document defines the standard for IDE-specific content injection in BMAD modules. Each IDE can inject its own specific content into BMAD templates during installation without polluting the source files with IDE-specific code. The installation process is interactive, allowing users to choose what IDE-specific features they want to install.
-
-## Architecture
-
-### 1. Injection Points
-
-Files that support IDE-specific content define injection points using HTML comments:
-
-```xml
-<!-- IDE-INJECT-POINT: unique-point-name -->
-```
-
-### 2. Module Structure
-
-Each module that needs IDE-specific content creates a sub-module folder:
-
-```
-src/modules/{module-name}/sub-modules/{ide-name}/
-  ├── injections.yaml    # Injection configuration
-  ├── sub-agents/        # IDE-specific subagents (if applicable)
-  └── config.yaml        # Other IDE-specific config
-```
-
-### 3. Injection Configuration Format
-
-The `injections.yaml` file defines what content to inject where:
-
-```yaml
-# injections.yaml structure
-injections:
-  - file: 'relative/path/to/file.md' # Path relative to installation root
-    point: 'injection-point-name' # Must match IDE-INJECT-POINT name
-    requires: 'subagent-name' # Which subagent must be selected (or "any")
-    content: | # Content to inject (preserves formatting)
-      <llm>
-        <i>Instructions specific to this IDE</i>
-      </llm>
-
-# Subagents available for installation
-subagents:
-  source: 'sub-agents' # Source folder relative to this config
-  target: '.claude/agents' # Claude's expected location (don't change)
-  files:
-    - 'agent1.md'
-    - 'agent2.md'
-```
-
-### 4. Interactive Installation Process
-
-For Claude Code specifically, the installer will:
-
-1. **Detect available subagents** from the module's `injections.yaml`
-2. **Ask the user** about subagent installation:
-   - Install all subagents (default)
-   - Select specific subagents
-   - Skip subagent installation
-3. **Ask installation location** (if subagents selected):
-   - Project level: `.claude/agents/`
-   - User level: `~/.claude/agents/`
-4. **Copy selected subagents** to the chosen location
-5. **Inject only relevant content** based on selected subagents
-
-Other IDEs can implement their own installation logic appropriate to their architecture.
-
-## Implementation
-
-### IDE Installer Responsibilities
-
-Each IDE installer (e.g., `claude-code.js`) must:
-
-1. **Check for sub-modules**: Look for `sub-modules/{ide-name}/` in each installed module
-2. **Load injection config**: Parse `injections.yaml` if present
-3. **Process injections**: Replace injection points with configured content
-4. **Copy additional files**: Handle subagents or other IDE-specific files
-
-### Example Implementation (Claude Code)
-
-```javascript
-async processModuleInjections(projectDir, bmadDir, options) {
-  for (const moduleName of options.selectedModules) {
-    const configPath = path.join(
-      bmadDir, 'src/modules', moduleName,
-      'sub-modules/claude-code/injections.yaml'
-    );
-
-    if (exists(configPath)) {
-      const config = yaml.load(configPath);
-
-      // Interactive: Ask user about subagent installation
-      const choices = await this.promptSubagentInstallation(config.subagents);
-
-      if (choices.install !== 'none') {
-        // Ask where to install
-        const location = await this.promptInstallLocation();
-
-        // Process injections based on selections
-        for (const injection of config.injections) {
-          if (this.shouldInject(injection, choices)) {
-            await this.injectContent(projectDir, injection, choices);
-          }
-        }
-
-        // Copy selected subagents
-        await this.copySelectedSubagents(projectDir, config.subagents, choices, location);
-      }
-    }
-  }
-}
-```
-
-## Benefits
-
-1. **Clean Source Files**: No IDE-specific conditionals in source
-2. **Modular**: Each IDE manages its own injections
-3. **Scalable**: Easy to add support for new IDEs
-4. **Maintainable**: IDE-specific content lives with IDE config
-5. **Flexible**: Different modules can inject different content
-
-## Adding Support for a New IDE
-
-1. Create sub-module folder: `src/modules/{module}/sub-modules/{new-ide}/`
-2. Add `injections.yaml` with IDE-specific content
-3. Update IDE installer to process injections using this standard
-4. Test installation with and without the IDE selected
-
-## Example: BMM Module with Claude Code
-
-### File Structure
-
-```
-src/modules/bmm/
-├── agents/pm.md                         # Has injection point
-├── templates/prd.md                     # Has multiple injection points
-└── sub-modules/
-    └── claude-code/
-        ├── injections.yaml              # Defines what to inject
-        └── sub-agents/                  # Claude Code specific subagents
-            ├── market-researcher.md
-            ├── requirements-analyst.md
-            └── ...
-```
-
-### Injection Point in pm.md
-
-```xml
-<agent>
-  <persona>...</persona>
-  <!-- IDE-INJECT-POINT: pm-agent-instructions -->
-  <cmds>...</cmds>
-</agent>
-```
-
-### Injection Configuration
-
-```yaml
-injections:
-  - file: '{bmad_folder}/bmm/agents/pm.md'
-    point: 'pm-agent-instructions'
-    requires: 'any' # Injected if ANY subagent is selected
-    content: |
-      <llm critical="true">
-        <i>Use 'market-researcher' subagent for analysis</i>
-      </llm>
-
-  - file: '{bmad_folder}/bmm/templates/prd.md'
-    point: 'prd-goals-context-delegation'
-    requires: 'market-researcher' # Only if this specific subagent selected
-    content: |
-      <i>DELEGATE: Use 'market-researcher' subagent...</i>
-```
-
-### Result After Installation
-
-```xml
-<agent>
-  <persona>...</persona>
-  <llm critical="true">
-    <i>Use 'market-researcher' subagent for analysis</i>
-  </llm>
-  <cmds>...</cmds>
-</agent>
-```