anchi-toolkit 1.0.0

package/scripts/install-hooks.sh

@@ -0,0 +1,54 @@
+#!/bin/bash
+# ═══════════════════════════════════════════════════════════════
+# anchi-kit Git Hooks Installer (macOS/Linux)
+# ═══════════════════════════════════════════════════════════════
+
+echo ""
+echo "🔗 anchi-kit Git Hooks Installer"
+echo "═══════════════════════════════════════════════════════════════"
+echo ""
+
+GIT_DIR=".git"
+HOOKS_DIR="$GIT_DIR/hooks"
+
+# Check if git repository
+if [ ! -d "$GIT_DIR" ]; then
+    echo "❌ Not a git repository"
+    exit 1
+fi
+
+# Create hooks directory
+mkdir -p "$HOOKS_DIR"
+
+# Create pre-commit hook
+cat > "$HOOKS_DIR/pre-commit" << 'EOF'
+#!/bin/sh
+# anchi-kit pre-commit hook
+# Reminder: Run /review:fast before committing
+
+echo "💡 anchi-kit reminder: Consider running /review:fast"
+echo "   To skip: git commit --no-verify"
+exit 0
+EOF
+chmod +x "$HOOKS_DIR/pre-commit"
+echo "✅ Installed: pre-commit hook"
+
+# Create post-merge hook
+cat > "$HOOKS_DIR/post-merge" << 'EOF'
+#!/bin/sh
+# anchi-kit post-merge hook
+# Reminder: Update docs after merge
+
+echo "💡 anchi-kit reminder: Consider running /docs:update"
+exit 0
+EOF
+chmod +x "$HOOKS_DIR/post-merge"
+echo "✅ Installed: post-merge hook"
+
+echo ""
+echo "═══════════════════════════════════════════════════════════════"
+echo "✅ Git hooks installed successfully!"
+echo ""
+echo "📌 Hooks will show reminders for anchi-kit commands."
+echo "   To skip: use --no-verify flag"
+echo ""

package/scripts/install.ps1

@@ -0,0 +1,204 @@
+# =============================================================================
+# Script: Install anchi-kit vào dự án có sẵn
+# Cách dùng: 
+#   Từ folder dự án: irm https://raw.githubusercontent.com/.../install.ps1 | iex
+#   Hoặc: .\install.ps1 -KitPath "path/to/anchi-kit"
+# =============================================================================
+
+param(
+    [string]$KitPath = ""
+)
+
+$ErrorActionPreference = "Stop"
+
+# =============================================================================
+# HELPER FUNCTIONS
+# =============================================================================
+
+function Write-Banner {
+    Write-Host ""
+    Write-Host "╔═══════════════════════════════════════════════════════════╗" -ForegroundColor Cyan
+    Write-Host "║           🚀 anchi-kit Installer                          ║" -ForegroundColor Cyan
+    Write-Host "║     Cài đặt Cursor AI toolkit vào dự án có sẵn            ║" -ForegroundColor Cyan
+    Write-Host "╚═══════════════════════════════════════════════════════════╝" -ForegroundColor Cyan
+    Write-Host ""
+}
+
+function Ask-ConflictResolution {
+    param([string]$FilePath)
+    
+    Write-Host ""
+    Write-Host "⚠️  File đã tồn tại: $FilePath" -ForegroundColor Yellow
+    Write-Host "    [O] Overwrite - Ghi đè (backup file cũ)"
+    Write-Host "    [S] Skip - Bỏ qua, giữ file hiện tại"
+    Write-Host "    [M] Merge - Mở cả 2 file để merge thủ công"
+    Write-Host ""
+    
+    do {
+        $choice = Read-Host "    Chọn (O/S/M)"
+        $choice = $choice.ToUpper()
+    } while ($choice -notin @("O", "S", "M"))
+    
+    return $choice
+}
+
+function Backup-File {
+    param([string]$FilePath)
+    
+    $timestamp = Get-Date -Format "yyyyMMdd_HHmmss"
+    $backupPath = "$FilePath.backup_$timestamp"
+    Copy-Item $FilePath $backupPath -Force
+    Write-Host "    📦 Backup: $backupPath" -ForegroundColor DarkGray
+    return $backupPath
+}
+
+function Copy-WithConflictHandling {
+    param(
+        [string]$Source,
+        [string]$Destination,
+        [switch]$IsDirectory
+    )
+    
+    if ($IsDirectory) {
+        if (Test-Path $Destination) {
+            # Directory exists - copy contents with per-file handling
+            Get-ChildItem $Source -Recurse | ForEach-Object {
+                $relativePath = $_.FullName.Substring($Source.Length + 1)
+                $destPath = Join-Path $Destination $relativePath
+                
+                if ($_.PSIsContainer) {
+                    if (-not (Test-Path $destPath)) {
+                        New-Item -ItemType Directory -Path $destPath -Force | Out-Null
+                    }
+                } else {
+                    if (Test-Path $destPath) {
+                        $choice = Ask-ConflictResolution -FilePath $relativePath
+                        switch ($choice) {
+                            "O" {
+                                Backup-File -FilePath $destPath
+                                Copy-Item $_.FullName $destPath -Force
+                                Write-Host "    ✅ Overwrote: $relativePath" -ForegroundColor Green
+                            }
+                            "S" {
+                                Write-Host "    ⏭️  Skipped: $relativePath" -ForegroundColor Gray
+                            }
+                            "M" {
+                                $newPath = "$destPath.new"
+                                Copy-Item $_.FullName $newPath -Force
+                                Write-Host "    📝 Merge manually: $relativePath vs $relativePath.new" -ForegroundColor Yellow
+                            }
+                        }
+                    } else {
+                        $parentDir = Split-Path $destPath -Parent
+                        if (-not (Test-Path $parentDir)) {
+                            New-Item -ItemType Directory -Path $parentDir -Force | Out-Null
+                        }
+                        Copy-Item $_.FullName $destPath -Force
+                    }
+                }
+            }
+        } else {
+            Copy-Item $Source $Destination -Recurse -Force
+            Write-Host "    ✅ Copied: $(Split-Path $Source -Leaf)/" -ForegroundColor Green
+        }
+    } else {
+        if (Test-Path $Destination) {
+            $choice = Ask-ConflictResolution -FilePath (Split-Path $Destination -Leaf)
+            switch ($choice) {
+                "O" {
+                    Backup-File -FilePath $Destination
+                    Copy-Item $Source $Destination -Force
+                    Write-Host "    ✅ Overwrote: $(Split-Path $Destination -Leaf)" -ForegroundColor Green
+                }
+                "S" {
+                    Write-Host "    ⏭️  Skipped: $(Split-Path $Destination -Leaf)" -ForegroundColor Gray
+                }
+                "M" {
+                    $newPath = "$Destination.new"
+                    Copy-Item $Source $newPath -Force
+                    Write-Host "    📝 Merge manually: $(Split-Path $Destination -Leaf) vs $(Split-Path $Destination -Leaf).new" -ForegroundColor Yellow
+                }
+            }
+        } else {
+            Copy-Item $Source $Destination -Force
+            Write-Host "    ✅ Copied: $(Split-Path $Destination -Leaf)" -ForegroundColor Green
+        }
+    }
+}
+
+# =============================================================================
+# MAIN INSTALLATION
+# =============================================================================
+
+Write-Banner
+
+$TargetPath = Get-Location
+
+# Determine kit source
+if ($KitPath -eq "") {
+    # Check if running from kit directory
+    if (Test-Path (Join-Path $PSScriptRoot "..\presets")) {
+        $KitPath = Split-Path $PSScriptRoot -Parent
+    } else {
+        Write-Host "❌ Không tìm thấy anchi-kit source." -ForegroundColor Red
+        Write-Host "   Sử dụng: .\install.ps1 -KitPath 'path/to/anchi-kit'" -ForegroundColor Yellow
+        exit 1
+    }
+}
+
+Write-Host "📁 Kit source: $KitPath" -ForegroundColor Gray
+Write-Host "📂 Target: $TargetPath" -ForegroundColor Gray
+Write-Host ""
+
+# Confirm installation
+$confirm = Read-Host "Tiếp tục cài đặt? (Y/n)"
+if ($confirm -eq "n" -or $confirm -eq "N") {
+    Write-Host "❌ Đã hủy." -ForegroundColor Red
+    exit 0
+}
+
+Write-Host ""
+Write-Host "📋 Installing anchi-kit components..." -ForegroundColor Yellow
+Write-Host ""
+
+# Install components
+$components = @(
+    @{ Source = ".cursor"; IsDir = $true; Desc = "Cursor commands, agents, skills" },
+    @{ Source = "presets"; IsDir = $true; Desc = "Architecture presets" },
+    @{ Source = "docs"; IsDir = $true; Desc = "Documentation templates" },
+    @{ Source = ".cursorrules"; IsDir = $false; Desc = "Cursor rules" },
+    @{ Source = "CURSOR.md"; IsDir = $false; Desc = "AI instructions" },
+    @{ Source = "GEMINI.md"; IsDir = $false; Desc = "Gemini AI instructions" },
+    @{ Source = "ANTIGRAVITY.md"; IsDir = $false; Desc = "Antigravity instructions" }
+)
+
+foreach ($comp in $components) {
+    $sourcePath = Join-Path $KitPath $comp.Source
+    $destPath = Join-Path $TargetPath $comp.Source
+    
+    if (Test-Path $sourcePath) {
+        Write-Host "  📦 $($comp.Desc)..." -ForegroundColor Cyan
+        if ($comp.IsDir) {
+            Copy-WithConflictHandling -Source $sourcePath -Destination $destPath -IsDirectory
+        } else {
+            Copy-WithConflictHandling -Source $sourcePath -Destination $destPath
+        }
+    }
+}
+
+Write-Host ""
+Write-Host "═══════════════════════════════════════════════════════════════" -ForegroundColor Cyan
+Write-Host "  ✅ anchi-kit đã được cài đặt thành công!" -ForegroundColor Green
+Write-Host "═══════════════════════════════════════════════════════════════" -ForegroundColor Cyan
+Write-Host ""
+Write-Host "📌 Bước tiếp theo:" -ForegroundColor Yellow
+Write-Host ""
+Write-Host "  1. Mở Cursor IDE và chạy:" -ForegroundColor White
+Write-Host "     /start" -ForegroundColor Green
+Write-Host ""
+Write-Host "  2. Chọn preset phù hợp:" -ForegroundColor White
+Write-Host "     /use-preset rapid|professional|enterprise" -ForegroundColor Green
+Write-Host ""
+Write-Host "  3. Bắt đầu code:" -ForegroundColor White
+Write-Host "     /plan \"Feature description\"" -ForegroundColor Green
+Write-Host ""

package/scripts/install.sh

@@ -0,0 +1,208 @@
+#!/bin/bash
+# =============================================================================
+# Script: Install anchi-kit vào dự án có sẵn
+# Cách dùng: 
+#   Từ folder dự án: curl -sSL https://raw.githubusercontent.com/.../install.sh | bash
+#   Hoặc: ./install.sh --kit-path "path/to/anchi-kit"
+# =============================================================================
+
+set -e
+
+KIT_PATH=""
+TARGET_PATH=$(pwd)
+
+# =============================================================================
+# COLORS
+# =============================================================================
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+CYAN='\033[0;36m'
+GRAY='\033[0;37m'
+NC='\033[0m' # No Color
+
+# =============================================================================
+# HELPER FUNCTIONS
+# =============================================================================
+
+write_banner() {
+    echo ""
+    echo -e "${CYAN}╔═══════════════════════════════════════════════════════════╗${NC}"
+    echo -e "${CYAN}║           🚀 anchi-kit Installer                          ║${NC}"
+    echo -e "${CYAN}║     Cài đặt Cursor AI toolkit vào dự án có sẵn            ║${NC}"
+    echo -e "${CYAN}╚═══════════════════════════════════════════════════════════╝${NC}"
+    echo ""
+}
+
+ask_conflict_resolution() {
+    local file_path=$1
+    
+    echo ""
+    echo -e "${YELLOW}⚠️  File đã tồn tại: $file_path${NC}"
+    echo "    [O] Overwrite - Ghi đè (backup file cũ)"
+    echo "    [S] Skip - Bỏ qua, giữ file hiện tại"
+    echo "    [M] Merge - Tạo file .new để merge thủ công"
+    echo ""
+    
+    while true; do
+        read -p "    Chọn (O/S/M): " choice
+        choice=$(echo "$choice" | tr '[:lower:]' '[:upper:]')
+        case $choice in
+            O|S|M) echo "$choice"; return ;;
+            *) echo "    Vui lòng chọn O, S, hoặc M" ;;
+        esac
+    done
+}
+
+backup_file() {
+    local file_path=$1
+    local timestamp=$(date +"%Y%m%d_%H%M%S")
+    local backup_path="${file_path}.backup_${timestamp}"
+    cp "$file_path" "$backup_path"
+    echo -e "    ${GRAY}📦 Backup: $backup_path${NC}"
+}
+
+copy_with_conflict_handling() {
+    local source=$1
+    local destination=$2
+    local is_directory=$3
+    
+    if [ "$is_directory" = "true" ]; then
+        if [ -d "$destination" ]; then
+            # Directory exists - copy contents with per-file handling
+            find "$source" -type f | while read -r src_file; do
+                relative_path="${src_file#$source/}"
+                dest_file="$destination/$relative_path"
+                dest_dir=$(dirname "$dest_file")
+                
+                mkdir -p "$dest_dir"
+                
+                if [ -f "$dest_file" ]; then
+                    choice=$(ask_conflict_resolution "$relative_path")
+                    case $choice in
+                        O)
+                            backup_file "$dest_file"
+                            cp "$src_file" "$dest_file"
+                            echo -e "    ${GREEN}✅ Overwrote: $relative_path${NC}"
+                            ;;
+                        S)
+                            echo -e "    ${GRAY}⏭️  Skipped: $relative_path${NC}"
+                            ;;
+                        M)
+                            cp "$src_file" "${dest_file}.new"
+                            echo -e "    ${YELLOW}📝 Merge manually: $relative_path vs ${relative_path}.new${NC}"
+                            ;;
+                    esac
+                else
+                    cp "$src_file" "$dest_file"
+                fi
+            done
+        else
+            cp -r "$source" "$destination"
+            echo -e "    ${GREEN}✅ Copied: $(basename $source)/${NC}"
+        fi
+    else
+        if [ -f "$destination" ]; then
+            choice=$(ask_conflict_resolution "$(basename $destination)")
+            case $choice in
+                O)
+                    backup_file "$destination"
+                    cp "$source" "$destination"
+                    echo -e "    ${GREEN}✅ Overwrote: $(basename $destination)${NC}"
+                    ;;
+                S)
+                    echo -e "    ${GRAY}⏭️  Skipped: $(basename $destination)${NC}"
+                    ;;
+                M)
+                    cp "$source" "${destination}.new"
+                    echo -e "    ${YELLOW}📝 Merge manually: $(basename $destination) vs $(basename $destination).new${NC}"
+                    ;;
+            esac
+        else
+            cp "$source" "$destination"
+            echo -e "    ${GREEN}✅ Copied: $(basename $destination)${NC}"
+        fi
+    fi
+}
+
+# =============================================================================
+# PARSE ARGUMENTS
+# =============================================================================
+
+while [[ $# -gt 0 ]]; do
+    case $1 in
+        --kit-path)
+            KIT_PATH="$2"
+            shift 2
+            ;;
+        *)
+            shift
+            ;;
+    esac
+done
+
+# =============================================================================
+# MAIN INSTALLATION
+# =============================================================================
+
+write_banner
+
+# Determine kit source
+if [ -z "$KIT_PATH" ]; then
+    SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+    if [ -d "$SCRIPT_DIR/../presets" ]; then
+        KIT_PATH="$(dirname "$SCRIPT_DIR")"
+    else
+        echo -e "${RED}❌ Không tìm thấy anchi-kit source.${NC}"
+        echo -e "${YELLOW}   Sử dụng: ./install.sh --kit-path 'path/to/anchi-kit'${NC}"
+        exit 1
+    fi
+fi
+
+echo -e "${GRAY}📁 Kit source: $KIT_PATH${NC}"
+echo -e "${GRAY}📂 Target: $TARGET_PATH${NC}"
+echo ""
+
+# Confirm installation
+read -p "Tiếp tục cài đặt? (Y/n): " confirm
+if [ "$confirm" = "n" ] || [ "$confirm" = "N" ]; then
+    echo -e "${RED}❌ Đã hủy.${NC}"
+    exit 0
+fi
+
+echo ""
+echo -e "${YELLOW}📋 Installing anchi-kit components...${NC}"
+echo ""
+
+# Install directories
+for dir in ".cursor" "presets" "docs"; do
+    if [ -d "$KIT_PATH/$dir" ]; then
+        echo -e "  ${CYAN}📦 Installing $dir/...${NC}"
+        copy_with_conflict_handling "$KIT_PATH/$dir" "$TARGET_PATH/$dir" "true"
+    fi
+done
+
+# Install files
+for file in ".cursorrules" "CURSOR.md" "GEMINI.md" "ANTIGRAVITY.md"; do
+    if [ -f "$KIT_PATH/$file" ]; then
+        echo -e "  ${CYAN}📦 Installing $file...${NC}"
+        copy_with_conflict_handling "$KIT_PATH/$file" "$TARGET_PATH/$file" "false"
+    fi
+done
+
+echo ""
+echo -e "${CYAN}═══════════════════════════════════════════════════════════════${NC}"
+echo -e "  ${GREEN}✅ anchi-kit đã được cài đặt thành công!${NC}"
+echo -e "${CYAN}═══════════════════════════════════════════════════════════════${NC}"
+echo ""
+echo -e "${YELLOW}📌 Bước tiếp theo:${NC}"
+echo ""
+echo "  1. Mở Cursor IDE và chạy:"
+echo -e "     ${GREEN}/start${NC}"
+echo ""
+echo "  2. Chọn preset phù hợp:"
+echo -e "     ${GREEN}/use-preset rapid|professional|enterprise${NC}"
+echo ""
+echo "  3. Bắt đầu code:"
+echo -e "     ${GREEN}/plan \"Feature description\"${NC}"
+echo ""

package/scripts/new-project.ps1

@@ -0,0 +1,101 @@
+# Script: Tạo Dự Án Mới Từ Template
+# Cách dùng: .\new-project.ps1 -ProjectName "my-webapp"
+
+param(
+    [Parameter(Mandatory=$true)]
+    [string]$ProjectName,
+    
+    [string]$TemplatePath = $PSScriptRoot
+)
+
+# Nếu chạy từ folder template, lấy path hiện tại
+if ($TemplatePath -eq $PSScriptRoot -and $PSScriptRoot -eq "") {
+    $TemplatePath = Get-Location
+}
+
+$TargetPath = Join-Path (Get-Location) $ProjectName
+
+Write-Host ""
+Write-Host "🚀 Tạo dự án: $ProjectName" -ForegroundColor Cyan
+Write-Host "📁 Template: $TemplatePath" -ForegroundColor Gray
+Write-Host "📂 Target: $TargetPath" -ForegroundColor Gray
+Write-Host ""
+
+# Tạo folder
+New-Item -ItemType Directory -Path $TargetPath -Force | Out-Null
+
+# Copy template
+Write-Host "📋 Copying template files..." -ForegroundColor Yellow
+Copy-Item -Path "$TemplatePath\*" -Destination $TargetPath -Recurse -Force
+
+# Vào folder
+Set-Location $TargetPath
+
+# Xóa files không cần
+Write-Host "🧹 Cleaning up unnecessary files..." -ForegroundColor Yellow
+
+$filesToDelete = @(
+    "CHANGELOG.md",
+    "PROJECT_EXPLANATION_VI.md", 
+    "USAGE_GUIDE_VI.md",
+    ".releaserc.beta-config.json",
+    ".releaserc.production.json",
+    ".releaserc.cjs",
+    ".coverage",
+    ".repomixignore",
+    ".commitlintrc.json"
+)
+
+foreach ($file in $filesToDelete) {
+    if (Test-Path $file) {
+        Remove-Item $file -Force -ErrorAction SilentlyContinue
+        Write-Host "  Deleted: $file" -ForegroundColor DarkGray
+    }
+}
+
+# Xóa folders không cần (giữ scripts vì có thể cần)
+$foldersToDelete = @("guide", "tests")
+foreach ($folder in $foldersToDelete) {
+    if (Test-Path $folder) {
+        Remove-Item $folder -Recurse -Force -ErrorAction SilentlyContinue
+        Write-Host "  Deleted: $folder/" -ForegroundColor DarkGray
+    }
+}
+
+# Init git
+Write-Host "📦 Initializing git repository..." -ForegroundColor Yellow
+Remove-Item ".git" -Recurse -Force -ErrorAction SilentlyContinue
+git init | Out-Null
+git add . | Out-Null
+git commit -m "chore: init project with anchi-cursorkit-antigravity template" | Out-Null
+
+# Cập nhật package.json
+Write-Host "📝 Updating package.json..." -ForegroundColor Yellow
+$packageJson = Get-Content "package.json" -Raw | ConvertFrom-Json
+$packageJson.name = $ProjectName
+$packageJson.version = "1.0.0"
+$packageJson.description = "Project created with anchi-cursorkit-antigravity template"
+$packageJson.author = $env:USERNAME
+$packageJson | ConvertTo-Json -Depth 10 | Set-Content "package.json"
+
+Write-Host ""
+Write-Host "========================================" -ForegroundColor Cyan
+Write-Host "  ✅ Dự án '$ProjectName' đã sẵn sàng!" -ForegroundColor Green
+Write-Host "========================================" -ForegroundColor Cyan
+Write-Host ""
+Write-Host "📌 Bước tiếp theo:" -ForegroundColor Yellow
+Write-Host ""
+Write-Host "  1. Mở Cursor IDE:" -ForegroundColor White
+Write-Host "     cursor ." -ForegroundColor Green
+Write-Host ""
+Write-Host "  2. Edit .cursorrules:" -ForegroundColor White
+Write-Host "     - Thay đổi Tech Stack phù hợp dự án" -ForegroundColor Gray
+Write-Host "     - Thêm coding conventions" -ForegroundColor Gray
+Write-Host ""
+Write-Host "  3. Edit docs/PROJECT.md:" -ForegroundColor White
+Write-Host "     - Mô tả dự án" -ForegroundColor Gray
+Write-Host "     - Liệt kê features" -ForegroundColor Gray
+Write-Host ""
+Write-Host "  4. Bắt đầu code với Cursor Chat:" -ForegroundColor White
+Write-Host "     /plan `"Feature description`"" -ForegroundColor Green
+Write-Host ""

package/scripts/new-project.sh

@@ -0,0 +1,61 @@
+#!/bin/bash
+# Script: Tạo Dự Án Mới Từ Template
+# Cách dùng: ./new-project.sh my-webapp
+
+PROJECT_NAME=$1
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+TEMPLATE_PATH="$(dirname "$SCRIPT_DIR")"
+TARGET_PATH="$(pwd)/$PROJECT_NAME"
+
+if [ -z "$PROJECT_NAME" ]; then
+    echo "❌ Vui lòng cung cấp tên dự án"
+    echo "Cách dùng: ./new-project.sh my-webapp"
+    exit 1
+fi
+
+echo ""
+echo "🚀 Tạo dự án: $PROJECT_NAME"
+echo "📁 Template: $TEMPLATE_PATH"
+echo "📂 Target: $TARGET_PATH"
+echo ""
+
+# Tạo folder và copy
+echo "📋 Copying template files..."
+mkdir -p "$TARGET_PATH"
+cp -r "$TEMPLATE_PATH"/* "$TARGET_PATH/"
+
+cd "$TARGET_PATH"
+
+# Xóa files không cần
+echo "🧹 Cleaning up unnecessary files..."
+rm -f CHANGELOG.md PROJECT_EXPLANATION_VI.md USAGE_GUIDE_VI.md
+rm -f .releaserc* .coverage .repomixignore .commitlintrc.json
+rm -rf guide tests
+
+# Init git
+echo "📦 Initializing git repository..."
+rm -rf .git
+git init > /dev/null 2>&1
+git add . > /dev/null 2>&1
+git commit -m "chore: init project with anchi-cursorkit-antigravity template" > /dev/null 2>&1
+
+# Cập nhật package.json
+echo "📝 Updating package.json..."
+if command -v jq &> /dev/null; then
+    jq ".name = \"$PROJECT_NAME\" | .version = \"1.0.0\" | .description = \"Project created with anchi-cursorkit-antigravity template\" | .author = \"$USER\"" package.json > temp.json && mv temp.json package.json
+fi
+
+echo ""
+echo "========================================"
+echo "  ✅ Dự án '$PROJECT_NAME' đã sẵn sàng!"
+echo "========================================"
+echo ""
+echo "📌 Bước tiếp theo:"
+echo ""
+echo "  1. Mở Cursor IDE:"
+echo "     cursor ."
+echo ""
+echo "  2. Edit .cursorrules"
+echo "  3. Edit docs/PROJECT.md"
+echo "  4. Bắt đầu code với: /plan \"Feature description\""
+echo ""