@zwave-js/config 9.6.0 → 9.6.1

package/config/devices/0x0063/43105_zw3014.json

@@ -33,107 +33,27 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Indication",
-			"description": "LED status when device on or off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED ON when load is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED On when light is turned On",
-					"value": 1
-				},
-				{
-					"label": "LED always OFF",
-					"value": 2
-				},
-				{
-					"label": "LED always ON",
-					"value": 3
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
 		},
 		{
 			"#": "6",
-			"label": "Dim Up/Down Rate",
-			"description": "Adjust the speed at which the ramps to a specific value other than 0 and FF",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Dim up/down quickly",
-					"value": 0
-				},
-				{
-					"label": "Dim up/down slowly",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#dim_rate"
 		},
 		{
 			"#": "16",
-			"label": "Switch Mode",
-			"description": "Turn your dimmer into an On/Off Switch",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Operation",
-					"value": 0
-				},
-				{
-					"label": "Switch Mode",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#switch_mode"
 		},
 		{
 			"#": "19",
-			"label": "Alternate Exclusion",
-			"description": "Enables alternate exclusion method to avoid accidental exclusion of device",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Operation, press any button to exclude device",
-					"value": 0
-				},
-				{
-					"label": "Press two times ON button and two times OFF button, LED will flash 5 times if device is successfully excluded",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#alternate_exclusion"
 		},
 		{
 			"#": "20",
-			"label": "Minimum Dim Threshold",
-			"description": "Set the minimum dimmer threshold when manually or remotely controlled",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dim_threshold_min"
 		},
 		{
 			"#": "32",
-			"label": "Default Brightness Level",
-			"description": "Set the default brightness level that the dimmer will turn on when being controlled manually",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 0,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#default_brightness_level"
 		}
 	],
 	"compat": {

package/config/devices/0x0063/43107_zw3015.json

@@ -33,117 +33,31 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Indication",
-			"description": "LED status when device on or off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED ON when load is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED On when light is turned On",
-					"value": 1
-				},
-				{
-					"label": "LED always OFF",
-					"value": 2
-				},
-				{
-					"label": "LED always ON",
-					"value": 3
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
 		},
 		{
 			"#": "6",
-			"label": "Dim Rate",
-			"description": "Adjust the speed at which the ramps to a specific value other than 0 and FF",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Dim up/down quickly",
-					"value": 0
-				},
-				{
-					"label": "Dim up/down slowly",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#dim_rate"
 		},
 		{
 			"#": "16",
-			"label": "Switch Mode",
-			"description": "Turn your dimmer into an On/Off switch with switch mode",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Operation",
-					"value": 0
-				},
-				{
-					"label": "Switch Mode",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#switch_mode"
 		},
 		{
 			"#": "19",
-			"label": "Alternate Exclusion",
-			"description": "Alternate Exclusion method to prevent accidental removal of device",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Operation, press any button to exclude device",
-					"value": 0
-				},
-				{
-					"label": "Press two times ON button and two times OFF button, LED will flash 5 times if device is successfully excluded",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#alternate_exclusion"
 		},
 		{
 			"#": "20",
-			"label": "Minimum Dim Threshold",
-			"description": "Set the minimum dimmer threshold when manually or remotely controlled",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dim_threshold_min"
 		},
 		{
 			"#": "31",
-			"label": "Maximum Brightness Threshold",
-			"description": "Set the maximum brightness threshold when manually or remotely controlled",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 99,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dim_threshold_max"
 		},
 		{
 			"#": "32",
-			"label": "Default Brightness Level",
-			"description": "Set the default brightness level that the dimmer will turn on when being controlled manually",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 0,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#default_brightness_level"
 		}
 	],
 	"compat": {

package/config/devices/0x0063/43973_zw6305.json

@@ -36,22 +36,7 @@
 		},
 		{
 			"#": "19",
-			"label": "Alternate Exclusion",
-			"description": "This parameter allows you to enable the alternate exclusion method that is available for this device",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "(default) disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#alternate_exclusion"
 		},
 		{
 			"#": "20",

package/config/devices/0x0063/43985_zw6306.json

@@ -17,22 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "19",
-			"label": "Alternate Exclusion",
-			"description": "When enabled, press the button three times quickly when prompted to remove device",
-			"valueSize": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Press the button once when prompted to remove device",
-					"value": 0
-				},
-				{
-					"label": "Press the button three times quickly when prompted to remove device",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#alternate_exclusion_h"
 		},
 		{
 			"#": "21",

package/config/devices/0x0063/45603.json

@@ -20,45 +20,11 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "Night Light",
-			"description": "Defines the behavior of the blue LED; default has LED on when switch is off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch is ON",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "4",
-			"label": "Invert Switch",
-			"description": "Change the top of the switch to OFF and the bottom of the switch to ON.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		}
 	]
 }

package/config/devices/0x0063/45605.json

@@ -16,45 +16,11 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "Night Light",
-			"description": "Defines the behavior of the blue LED.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch is ON",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "4",
-			"label": "Invert Switch",
-			"description": "Change the top of the switch to OFF",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		}
 	]
 }

package/config/devices/0x0063/45606.json

@@ -16,127 +16,39 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "Night Light",
-			"description": "Defines the behavior of the blue LED.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch is ON",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "4",
-			"label": "Invert Switch",
-			"description": "Change the top of the switch to OFF and the bottom of the switch to ON.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		},
 		{
 			"#": "5",
-			"label": "Ignore Start-Level (Receiving)",
-			"description": "This dimmer will start dimming from its current level.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#ignore_start_level"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	]
 }

package/config/devices/0x0063/45607.json

@@ -16,122 +16,39 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "Night Light",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch is ON",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "4",
-			"label": "Invert Switch",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		},
 		{
 			"#": "5",
-			"label": "Ignore Start-Level (Receiving)",
-			"description": "This dimmer will start dimming from its current level.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "No",
-					"value": 0
-				},
-				{
-					"label": "Yes",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#ignore_start_level"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	]
 }