@zwave-js/config 9.6.0 → 9.6.1

package/config/devices/0x019b/z-dim2.json

@@ -0,0 +1,226 @@
+{
+	"manufacturer": "Heatit",
+	"manufacturerId": "0x019b",
+	"label": "Z-DIM2",
+	"description": "Heatit Z-Dim2",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x2201",
+			"zwaveAllianceId": 4666
+		},
+		{
+			"productType": "0x0002",
+			"productId": "0x2201"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Multilevel Switch",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Brightness After Power Failure",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 100,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Off",
+					"value": 0
+				},
+				{
+					"label": "Previous state",
+					"value": 100
+				}
+			]
+		},
+		{
+			"#": "10",
+			"$import": "~/templates/master_template.json#dimmer_type_trail_lead",
+			"defaultValue": 1
+		},
+		{
+			"#": "11",
+			"label": "Maximum Dim Level",
+			"valueSize": 1,
+			"minValue": 2,
+			"maxValue": 99,
+			"defaultValue": 90,
+			"unsigned": true
+		},
+		{
+			"#": "12",
+			"label": "Meter Report Threshold",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 250,
+			"defaultValue": 10,
+			"unit": "W",
+			"unsigned": true
+		},
+		{
+			"#": "13",
+			"label": "Meter Report Interval",
+			"valueSize": 2,
+			"minValue": 30,
+			"maxValue": 65535,
+			"defaultValue": 780,
+			"unit": "seconds",
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Switch On Level",
+			"description": "Dimming level when restored from the OFF state",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Restore previous brightness",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Auto-Off Timer",
+			"valueSize": 4,
+			"minValue": 0,
+			"maxValue": 86400,
+			"defaultValue": 0,
+			"unsigned": true,
+			"unit": "seconds",
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Auto-On Timer",
+			"valueSize": 4,
+			"minValue": 0,
+			"maxValue": 86400,
+			"defaultValue": 0,
+			"unsigned": true,
+			"unit": "seconds",
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Turn Off Delay",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 60,
+			"defaultValue": 0,
+			"unsigned": true,
+			"unit": "seconds",
+			"options": [
+				{
+					"label": "Instant",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Rotary Wheel Press Functionality",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Double click to 100%",
+					"value": 0
+				},
+				{
+					"label": "Scene controller function",
+					"value": 1
+				},
+				{
+					"label": "Disabled",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "7",
+			"label": "External Switch Functionality",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Double click to 100%",
+					"value": 0
+				},
+				{
+					"label": "Scene controller function",
+					"value": 1
+				},
+				{
+					"label": "Disabled",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Dimming Duration",
+			"valueSize": 1,
+			"unit": "ms",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 50,
+			"unsigned": true
+		},
+		{
+			"#": "9",
+			"label": "Dimmer Curve",
+			"$import": "~/templates/master_template.json#base_options_nounit",
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Linear",
+					"value": 0
+				},
+				{
+					"label": "Logarithmic",
+					"value": 1
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "The primary controller/gateway has a mode for adding devices. Please refer to your primary controller manual on how to set the primary controller in add mode. The device may only be added to the network if the primary controller is in add mode. \n\nMethod 1: Standard (Manual)\nAdd mode is indicated on the device by a blinking green LED. It indicates this for 90 seconds until a timeout occurs, or until the module has been added to the network. To start the configuration process press the Reset button, or the external switch connected to P, 3 times in rapid succession. The LED will blink green for 3 seconds if adding is successful. The device is now ready for use with default settings",
+		"exclusion": "The primary controller/gateway has a mode for removing devices. Please refer to your primary controller manual on how to set the primary controller in remove mode. The device may only be removed from the network if the primary controller is in remove mode. When the device is removed from the network, it will NOT revert to factory settings.\n\nRemove mode is indicated on the device by a blinking green LED. It indicates this for 90 seconds until a timeout occurs, or until the module has been removed from the network. To start the configuration process press the Reset button, or the external switch connected to P, 3 times in rapid succession. The LED will blink green for 3 seconds if removing is successful. The device is now ready for use with default settings",
+		"reset": "Press and hold the reset button. After 3 seconds the LED will start to blink in green. After 20 seconds the LED will shine solid green for 3 seconds. You may now release the button.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable"
+	}
+}

package/config/devices/0x027a/zen30.json

@@ -260,6 +260,12 @@
 			"$import": "templates/zooz_template.json#local_programming"
 		}
 	],
+	"compat": {
+		// This device exposes a Multilevel Switch (Dimmer) on endpoint 0, and a Binary Switch (Relay) on endpoint 1
+		// Our heuristic currently detects endpoint 1 as unnecessary and hides it from the user.
+		"preserveEndpoints": "*",
+		"preserveRootApplicationCCValueIDs": true
+	},
 	"metadata": {
 		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. Finalize inclusion at the switch. Tap the upper paddle of the dimmer 3 times quickly. The LED indicators will blink to signal communication and remain on for 2 seconds to confirm inclusion",
 		"exclusion": "Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode \n3. Tap the lower paddle on the dimmer 3 times quickly\n4. Your hub will confirm exclusion and the device will disappear from your\ncontroller's device list",

package/config/devices/0x027a/zen73.json

@@ -68,6 +68,11 @@
 			"$import": "templates/zooz_template.json#local_programming"
 		}
 	],
+	"compat": {
+		// The device sends Configuration CC info reports in 4-byte chunks, causing each query to block the network for roughly 1.5 seconds.
+		"skipConfigurationNameQuery": true,
+		"skipConfigurationInfoQuery": true
+	},
 	"metadata": {
 		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion.\n3. The LED indicator will blink blue to signal communication and turn green for 3 seconds if inclusion is successful or turn red for 3 seconds if the pairing attempt fails.",
 		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Tap the switch down 3 times quickly (the LED indicator will start blinking blue)\n4. Your hub will confirm exclusion, the LED indicator on the switch will turn green for 3 seconds, and the device will disappear from your controller's device list reset",

package/config/devices/0x027a/zen74.json

@@ -101,6 +101,11 @@
 			"$import": "templates/zooz_template.json#local_programming"
 		}
 	],
+	"compat": {
+		// The device sends Configuration CC info reports in 4-byte chunks, causing each query to block the network for roughly 1.5 seconds.
+		"skipConfigurationNameQuery": true,
+		"skipConfigurationInfoQuery": true
+	},
 	"metadata": {
 		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion.\n3. The LED indicator will blink blue to signal communication and turn green for 3 seconds if inclusion is successful or turn red for 3 seconds if the pairing attempt fails.",
 		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Toggle the switch down 3 times quickly (the LED indicator will start blinking blue)\n4. Your hub will confirm exclusion, the LED indicator on the switch will turn green for 3 seconds, and the device will disappear from your controller's device list",

package/config/devices/0x027a/zen76.json

@@ -93,6 +93,11 @@
 		{
 			"#": "16",
 			"$import": "templates/zooz_template.json#association_reports"
+		},
+		{
+			"#": "17",
+			"$if": "firmwareVersion >= 10.0",
+			"$import": "templates/zooz_template.json#local_programming"
 		}
 	],
 	"compat": {

package/config/devices/0x0312/mp21zp.json

@@ -17,15 +17,15 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"$import": "~/templates/master_template.json#led_indicator_four_options"
+			"$import": "templates/minoston_template.json#led_indicator_four_options_inverted"
 		},
 		{
 			"#": "2",
-			"$import": "~/0x0312/templates/minoston_template.json#auto_off_timer"
+			"$import": "templates/minoston_template.json#auto_off_timer"
 		},
 		{
 			"#": "3",
-			"$import": "~/0x0312/templates/minoston_template.json#auto_on_timer"
+			"$import": "templates/minoston_template.json#auto_on_timer"
 		},
 		{
 			"#": "4",
@@ -33,7 +33,7 @@
 		},
 		{
 			"#": "5",
-			"label": "Automating Reporting: Power Change Threshold",
+			"label": "Power Wattage Reporting Threshold",
 			"valueSize": 1,
 			"unit": "W",
 			"minValue": 0,
@@ -43,33 +43,15 @@
 		},
 		{
 			"#": "6",
-			"label": "Automating Reporting: Power Interval",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 1,
-			"maxValue": 54424,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/minoston_template.json#power_reporting_interval"
 		},
 		{
 			"#": "7",
-			"label": "Automating Reporting: Current Change Threshold",
-			"valueSize": 1,
-			"unit": "0.1 A",
-			"minValue": 1,
-			"maxValue": 10,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/minoston_template.json#current_reporting_threshold"
 		},
 		{
 			"#": "8",
-			"label": "Automating Reporting: kWh Change Threshold",
-			"valueSize": 1,
-			"unit": "0.01 kWh",
-			"minValue": 1,
-			"maxValue": 100,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/minoston_template.json#energy_reporting_threshold"
 		}
 	],
 	"metadata": {

package/config/devices/0x0312/mp22zp.json

@@ -0,0 +1,73 @@
+{
+	"manufacturer": "Minoston",
+	"manufacturerId": "0x0312",
+	"label": "MP22ZP",
+	"description": "Z-Wave Outdoor Smart Plug with Power Meter",
+	"devices": [
+		{
+			"productType": "0xff00",
+			"productId": "0xff0f"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/minoston_template.json#led_indicator_four_options_inverted"
+		},
+		{
+			"#": "2",
+			"$import": "templates/minoston_template.json#auto_off_timer"
+		},
+		{
+			"#": "3",
+			"$import": "templates/minoston_template.json#auto_on_timer"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#state_after_power_failure_prev_off_on"
+		},
+		{
+			"#": "5",
+			"label": "Power Reporting Threshold",
+			"valueSize": 1,
+			"unit": "W",
+			"minValue": 5,
+			"maxValue": 50,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"$import": "templates/minoston_template.json#power_reporting_interval"
+		},
+		{
+			"#": "7",
+			"$import": "templates/minoston_template.json#current_reporting_threshold"
+		},
+		{
+			"#": "8",
+			"$import": "templates/minoston_template.json#energy_reporting_threshold"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press the Manual/Program button on the smart plug 3 time quickly. The blue LED will blink quickly.",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device to the Z-Wave network.\n2. Once the controller is ready to remove your device, press the manual/program button on the smart plug 3 times quickly.",
+		"reset": "Click the button twice quickly then hold for at least 10 seconds.",
+		"manual": "https://minoston.com/wp-content/uploads/2022/05/MP22ZP-ZW96SP-manual-2021.12.30.pdf"
+	}
+}

package/config/devices/0x0312/templates/minoston_template.json

@@ -140,6 +140,33 @@
 		"$import": "~/templates/master_template.json#base_enable_disable",
 		"label": "Suppress State Reporting When Local Control is Disabled"
 	},
+	"led_indicator_four_options_inverted": {
+		"label": "LED Indicator",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 3,
+		"defaultValue": 0,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "On when load is on",
+				"value": 0
+			},
+			{
+				"label": "On when load is off",
+				"value": 1
+			},
+			{
+				"label": "LED always off",
+				"value": 2
+			},
+			{
+				"label": "LED always on",
+				"value": 3
+			}
+		]
+	},
 	"led_indicator_color": {
 		"label": "Led Indicator: Color",
 		"valueSize": 1,
@@ -272,5 +299,32 @@
 		"$import": "~/templates/master_template.json#base_enable_disable",
 		"label": "Send Status Change Report: Timer",
 		"defaultValue": 1
+	},
+	"power_reporting_interval": {
+		"label": "Power Reporting Interval",
+		"valueSize": 4,
+		"unit": "minutes",
+		"minValue": 1,
+		"maxValue": 65535,
+		"defaultValue": 5,
+		"unsigned": true
+	},
+	"current_reporting_threshold": {
+		"label": "Current Reporting Threshold",
+		"valueSize": 1,
+		"unit": "0.1 A",
+		"minValue": 1,
+		"maxValue": 10,
+		"defaultValue": 1,
+		"unsigned": true
+	},
+	"energy_reporting_threshold": {
+		"label": "Energy Reporting Threshold",
+		"valueSize": 1,
+		"unit": "0.01 kWh",
+		"minValue": 1,
+		"maxValue": 100,
+		"defaultValue": 1,
+		"unsigned": true
 	}
 }

package/config/devices/0x031e/lzw41.json

@@ -24,35 +24,52 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Prior state",
+					"label": "On",
 					"value": 0
 				},
 				{
-					"label": "Force on",
+					"label": "Previous state",
 					"value": 1
+				}
+			]
+		},
+		{
+			"#": "80",
+			"label": "Notifications to Associated Devices",
+			"description": "What notifications should be sent to associated devices when the state of the LED bulb is changed",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
 				},
 				{
-					"label": "Force off",
-					"value": 2
+					"label": "Multilevel Switch Report",
+					"value": 1
 				}
 			]
 		},
 		{
-			"#": "51",
+			"#": "81",
 			"label": "Color Temperature (Warm White)",
 			"valueSize": 2,
 			"minValue": 2700,
 			"maxValue": 4999,
 			"defaultValue": 2700,
+			"unit": "K",
 			"unsigned": true
 		},
 		{
-			"#": "52",
+			"#": "82",
 			"label": "Color Temperature (Cool White)",
 			"valueSize": 2,
 			"minValue": 5000,
 			"maxValue": 6500,
-			"defaultValue": 5000,
+			"defaultValue": 6500,
+			"unit": "K",
 			"unsigned": true
 		}
 	],

package/config/devices/0x031e/lzw42.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0x0005",
-			"productId": "0x0001"
+			"productId": "0x0001",
+			"zwaveAllianceId": 3613
 		}
 	],
 	"firmwareVersion": {
@@ -31,16 +32,12 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Previous state",
+					"label": "On",
 					"value": 0
 				},
 				{
-					"label": "On",
+					"label": "Previous state",
 					"value": 1
-				},
-				{
-					"label": "Off",
-					"value": 2
 				}
 			]
 		},
@@ -66,5 +63,11 @@
 			"unit": "K",
 			"unsigned": true
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "With the bulb turned off, start the inclusion process on your hub/gateway.  Once the inclusion process has started, turn on the bulb and it will immediately blink twice (2x) indicating it's in inclusion (pairing) mode.  If the bulb was included successfully, it will blink one more (1x) time.  If it was not included successfully, you may have to run an exclusion.  If there's still issues, please ensure your bulb is within range.",
+		"exclusion": "Put your hub in exclusion mode and turn the power to the bulb on.  Your bulb will blink twice (2x) indicating it's in exclusion mode.  When exclusion is successful, it will blink one more time (1x) to confirm.  Your hub should say that the device is excluded.",
+		"reset": "You may power on/off the bulb 6x (between 0.5-2 seconds each time) or use a certified controller to remove the device from your network to factory default.  Only use this procedure in the event that the network primary controller is missing or otherwise inoperable.  Your bulb will flash twice to confirm factory reset.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3613/LZW42%20Manual.pdf"
+	}
 }

package/config/devices/0x0344/he-tps01.json

@@ -48,6 +48,11 @@
 			"$import": "templates/heltun_template.json#relay_output_mode",
 			"label": "Relay 1: Output Mode"
 		},
+		{
+			"#": "12",
+			"$import": "templates/heltun_template.json#relay_load_power",
+			"label": "Relay 1: Load Power"
+		},
 		{
 			"#": "17",
 			"$import": "templates/heltun_template.json#temp_sensor_calibration",

package/config/devices/0x0371/zw175.json

@@ -34,7 +34,7 @@
 		},
 		{
 			"#": "9[0x01]",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Alarm Trigger State",
 			"valueSize": 2,
 			"options": [

package/config/devices/0x0371/zwa012.json

@@ -92,7 +92,7 @@
 		},
 		{
 			"#": "3",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "State when magnet is close to sensor",
 			"options": [
 				{
@@ -168,7 +168,7 @@
 		},
 		{
 			"#": "16",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Tilt sensor polarity when sensor is vertical",
 			"options": [
 				{

package/config/devices/templates/master_template.json

@@ -63,11 +63,11 @@
 			}
 		]
 	},
-	"base_0-1_options_nounit": {
-		// This template is meant to be used for parameters that have predefined options
+	"base_options_nounit": {
+		// This template is meant to be used for all parameters that
+		// allow selection of predefined options without manual entry
 		"valueSize": 1,
-		"minValue": 0,
-		"maxValue": 1,
+		// min/max value are inferred from the defined options
 		"defaultValue": 0,
 		"allowManualEntry": false
 	},

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "9.6.0",
+  "version": "9.6.1",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"