@zwave-js/config 9.6.0 → 9.6.1

package/config/devices/0x0063/zw3102.json

@@ -16,84 +16,31 @@
 	"paramInformation": [
 		{
 			"#": "5",
-			"label": "Ignore start level",
-			"description": "Ignore start level when receiving zwave dim commands",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Obey commend start level",
-					"value": 0
-				},
-				{
-					"label": "Ignore commend start level",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#ignore_start_level"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	]
 }

package/config/devices/0x0086/dsb28.json

@@ -34,7 +34,7 @@
 	"paramInformation": [
 		{
 			"#": "2",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Energy Detection Mode",
 			"options": [
 				{

package/config/devices/0x0086/dsc14.json

@@ -60,7 +60,7 @@
 		},
 		{
 			"#": "8",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Count of External Buttons/Switches",
 			"options": [
 				{

package/config/devices/0x0086/templates/aeotec_template.json

@@ -351,7 +351,7 @@
 		]
 	},
 	"celsius_fahrenheit_0": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Temperature Unit",
 		"valueSize": 4,
 		"options": [
@@ -699,7 +699,7 @@
 		]
 	},
 	"invert_state_report": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Invert Binary Report Value",
 		"options": [
 			{
@@ -713,7 +713,7 @@
 		]
 	},
 	"invert_basic_set": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Invert Basic Set on Open/Close Event",
 		"options": [
 			{
@@ -808,7 +808,7 @@
 		"unsigned": true
 	},
 	"report_power_voltage": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Multilevel Sensor Report Content",
 		"options": [
 			{
@@ -1520,7 +1520,7 @@
 		]
 	},
 	"sensor_operation_mode": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Sensor Operation Mode",
 		"options": [
 			{
@@ -1654,7 +1654,7 @@
 		"defaultValue": 1
 	},
 	"external_switch_two": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "External Switch Type",
 		"options": [
 			{
@@ -1783,7 +1783,7 @@
 		]
 	},
 	"switch_mode_state_s1": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Switch Mode (S1): State Sync",
 		"allowManualEntry": false,
 		"options": [
@@ -1798,7 +1798,7 @@
 		]
 	},
 	"switch_mode_state_s2": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Switch Mode (S2): State Sync",
 		"allowManualEntry": false,
 		"options": [
@@ -2151,7 +2151,7 @@
 		]
 	},
 	"dimming_principle": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Dimming Principle",
 		"defaultValue": 1,
 		"options": [
@@ -3069,7 +3069,7 @@
 		]
 	},
 	"wallmote_command_type": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Command Type to Send Association Groups",
 		"options": [
 			{
@@ -3114,7 +3114,7 @@
 		"defaultValue": 1
 	},
 	"wave_option": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "Wave Option",
 		"valueSize": 4,
 		"defaultValue": 1,
@@ -3289,7 +3289,7 @@
 		"label": "WallSwipe Sensitivity"
 	},
 	"wallswipe_status": {
-		"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+		"$import": "~/templates/master_template.json#base_options_nounit",
 		"label": "WallSwipe Status",
 		"options": [
 			{

package/config/devices/0x0086/zw056.json

@@ -117,7 +117,7 @@
 		},
 		{
 			"#": "10",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Define The Function of Button- and Button+",
 			"options": [
 				{
@@ -132,7 +132,7 @@
 		},
 		{
 			"#": "11",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Short/Long Press Function of Button- And Button+",
 			"options": [
 				{

package/config/devices/0x0086/zw062.json

@@ -49,7 +49,7 @@
 		},
 		{
 			"#": "34",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Sensor Calibration",
 			"description": "To calibrate, close door fully. Initiate calibration. Open door fully, then close door fully.",
 			"options": [
@@ -261,7 +261,7 @@
 		},
 		{
 			"#": "47",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Short/Long Press Function of Button- And Button+",
 			"options": [
 				{

package/config/devices/0x0086/zw121.json

@@ -77,7 +77,7 @@
 		},
 		{
 			"#": "35",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Cold/Warm White Display Mode",
 			"defaultValue": 1,
 			"options": [

package/config/devices/0x0086/zw122.json

@@ -255,7 +255,7 @@
 		},
 		{
 			"#": "94",
-			"$import": "~/templates/master_template.json#base_0-1_options_nounit",
+			"$import": "~/templates/master_template.json#base_options_nounit",
 			"label": "Battery Source to Report",
 			"options": [
 				{

package/config/devices/0x008b/trane_xr524.json

@@ -307,17 +307,17 @@
 		{
 			"#": "228[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Sunday (1): - Minute"
+			"label": "Schedule - Sunday (1): Minute"
 		},
 		{
 			"#": "228[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Sunday (1): - Heat Setpoint"
+			"label": "Schedule - Sunday (1): Heat Setpoint"
 		},
 		{
 			"#": "228[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Sunday (1): - Cool Setpoint"
+			"label": "Schedule - Sunday (1): Cool Setpoint"
 		},
 		{
 			"#": "229[0xff000000]",
@@ -387,17 +387,17 @@
 		{
 			"#": "232[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Monday (1): - Minute"
+			"label": "Schedule - Monday (1): Minute"
 		},
 		{
 			"#": "232[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Monday (1): - Heat Setpoint"
+			"label": "Schedule - Monday (1): Heat Setpoint"
 		},
 		{
 			"#": "232[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Monday (1): - Cool Setpoint"
+			"label": "Schedule - Monday (1): Cool Setpoint"
 		},
 		{
 			"#": "233[0xff000000]",
@@ -467,17 +467,17 @@
 		{
 			"#": "236[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Tuesday (1): - Minute"
+			"label": "Schedule - Tuesday (1): Minute"
 		},
 		{
 			"#": "236[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Tuesday (1): - Heat Setpoint"
+			"label": "Schedule - Tuesday (1): Heat Setpoint"
 		},
 		{
 			"#": "236[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Tuesday (1): - Cool Setpoint"
+			"label": "Schedule - Tuesday (1): Cool Setpoint"
 		},
 		{
 			"#": "237[0xff000000]",
@@ -547,17 +547,17 @@
 		{
 			"#": "240[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Wednesday (1): - Minute"
+			"label": "Schedule - Wednesday (1): Minute"
 		},
 		{
 			"#": "240[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Wednesday (1): - Heat Setpoint"
+			"label": "Schedule - Wednesday (1): Heat Setpoint"
 		},
 		{
 			"#": "240[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Wednesday (1): - Cool Setpoint"
+			"label": "Schedule - Wednesday (1): Cool Setpoint"
 		},
 		{
 			"#": "241[0xff000000]",
@@ -627,17 +627,17 @@
 		{
 			"#": "244[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Thursday (1): - Minute"
+			"label": "Schedule - Thursday (1): Minute"
 		},
 		{
 			"#": "244[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Thursday (1): - Heat Setpoint"
+			"label": "Schedule - Thursday (1): Heat Setpoint"
 		},
 		{
 			"#": "244[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Thursday (1): - Cool Setpoint"
+			"label": "Schedule - Thursday (1): Cool Setpoint"
 		},
 		{
 			"#": "245[0xff000000]",
@@ -707,17 +707,17 @@
 		{
 			"#": "248[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Friday (1): - Minute"
+			"label": "Schedule - Friday (1): Minute"
 		},
 		{
 			"#": "248[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Friday (1): - Heat Setpoint"
+			"label": "Schedule - Friday (1): Heat Setpoint"
 		},
 		{
 			"#": "248[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Friday (1): - Cool Setpoint"
+			"label": "Schedule - Friday (1): Cool Setpoint"
 		},
 		{
 			"#": "249[0xff000000]",
@@ -787,17 +787,17 @@
 		{
 			"#": "252[0xff0000]",
 			"$import": "templates/trane_template.json#schedule_minute",
-			"label": "Schedule - Saturday (1): - Minute"
+			"label": "Schedule - Saturday (1): Minute"
 		},
 		{
 			"#": "252[0xff00]",
 			"$import": "templates/trane_template.json#schedule_heat_setpoint",
-			"label": "Schedule - Saturday (1): - Heat Setpoint"
+			"label": "Schedule - Saturday (1): Heat Setpoint"
 		},
 		{
 			"#": "252[0xff]",
 			"$import": "templates/trane_template.json#schedule_cool_setpoint",
-			"label": "Schedule - Saturday (1): - Cool Setpoint"
+			"label": "Schedule - Saturday (1): Cool Setpoint"
 		},
 		{
 			"#": "253[0xff000000]",

package/config/devices/0x010f/fgdw002.json

@@ -16,6 +16,10 @@
 			"productType": "0x0702",
 			"productId": "0x3000"
 		},
+		{
+			"productType": "0x0702",
+			"productId": "0x4000"
+		},
 		{
 			"productType": "0x0702",
 			"productId": "0x7000"

package/config/devices/0x010f/fgwp102.json

@@ -12,6 +12,10 @@
 			"productType": "0x0602",
 			"productId": "0x1003"
 		},
+		{
+			"productType": "0x0602",
+			"productId": "0x4001"
+		},
 		{
 			"productType": "0x0602",
 			"productId": "0x4003"

package/config/devices/0x0156/m_n_kp01.json

@@ -99,6 +99,10 @@
 			"unsigned": true
 		}
 	],
+	"compat": {
+		// The device does not pad ASCII data to fill 16-byte blocks
+		"disableStrictEntryControlDataValidation": true
+	},
 	"metadata": {
 		"inclusion": "Use this standard method for adding Z-Wave devices at the panel or hub. Use the \"PAIR/RESET\" button next to the battery tray. Follow the onscreen prompts to add the keypad.",
 		"exclusion": "Removing Keypad from System\nTo remove the device, place the panel Use this standard method for excluding Z-Wave devices at the panel or hub. Use the \"PAIR/RESET\" button next to the battery tray. Follow the onscreen prompts to add the keypad",

package/config/devices/0x0189/117001.json

@@ -36,7 +36,6 @@
 			"maxValue": 3600,
 			"defaultValue": 240,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Disable",
@@ -52,7 +51,6 @@
 			"maxValue": 1,
 			"defaultValue": 0,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Restart timeout with each motion event",
@@ -73,7 +71,6 @@
 			"maxValue": 3600,
 			"defaultValue": 10,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Disable motion clear report",
@@ -89,8 +86,7 @@
 			"minValue": 10,
 			"maxValue": 50,
 			"defaultValue": 10,
-			"unsigned": true,
-			"readOnly": true
+			"unsigned": true
 		},
 		{
 			"#": "5",
@@ -101,7 +97,6 @@
 			"maxValue": 120,
 			"defaultValue": 12,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Disable",
@@ -118,7 +113,6 @@
 			"maxValue": 60,
 			"defaultValue": 50,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Disable",
@@ -145,7 +139,6 @@
 			"maxValue": 120,
 			"defaultValue": 6,
 			"unsigned": true,
-			"readOnly": true,
 			"options": [
 				{
 					"label": "Disable",
@@ -163,7 +156,6 @@
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,
-			"readOnly": true,
 			"allowManualEntry": false,
 			"options": [
 				{