@zwave-js/config 15.20.0 → 15.21.0

package/config/devices/0x0460/templates/wave_template.json

@@ -68,6 +68,7 @@
 		]
 	},
 	"auto_off_timer": {
+		"$purpose": "timer.auto_off",
 		"description": "The timer resets to zero each time the device receives an ON command",
 		"valueSize": 2,
 		"minValue": 0,
@@ -81,6 +82,7 @@
 		]
 	},
 	"auto_on_timer": {
+		"$purpose": "timer.auto_on",
 		"description": "The timer resets to zero each time the device receives an OFF command",
 		"valueSize": 2,
 		"minValue": 0,
@@ -125,6 +127,7 @@
 		]
 	},
 	"power_change_report_treshold": {
+		"$purpose": "reporting_threshold.power",
 		"valueSize": 1,
 		"unit": "%",
 		"minValue": 0,
@@ -216,6 +219,7 @@
 		"readOnly": true
 	},
 	"min_dimming_value": {
+		"$purpose": "minimum_brightness",
 		"label": "Minimum Dim Level",
 		"valueSize": 1,
 		"minValue": 1,
@@ -223,6 +227,7 @@
 		"defaultValue": 15
 	},
 	"max_dimming_value": {
+		"$purpose": "maximum_brightness",
 		"label": "Maximum Dim Level",
 		"valueSize": 1,
 		"minValue": 1,
@@ -238,6 +243,7 @@
 		"defaultValue": 3
 	},
 	"fade_rate": {
+		"$purpose": "ramp_rate",
 		"label": "Fade Rate (Long Press)",
 		"valueSize": 1,
 		"defaultValue": 2,
@@ -308,6 +314,7 @@
 		]
 	},
 	"motion_sensitivity": {
+		"$purpose": "motion_sensitivity",
 		"valueSize": 1,
 		"defaultValue": 1,
 		"allowManualEntry": false,
@@ -327,6 +334,7 @@
 		]
 	},
 	"motion_blind_time": {
+		"$purpose": "motion_retrigger_interval",
 		"valueSize": 1,
 		"unit": "seconds",
 		"minValue": 2,
@@ -340,6 +348,7 @@
 		"defaultValue": 1
 	},
 	"temperature_offset": {
+		"$purpose": "calibration.temperature",
 		"valueSize": 2,
 		"unit": "°C / °F",
 		"minValue": -500,
@@ -347,6 +356,7 @@
 		"defaultValue": 0
 	},
 	"humidity_offset": {
+		"$purpose": "calibration.humidity",
 		"valueSize": 2,
 		"unit": "RH %",
 		"minValue": -50,
@@ -354,6 +364,7 @@
 		"defaultValue": 0
 	},
 	"no_detection_time": {
+		"$purpose": "motion_clear_delay",
 		"description": "Time after last motion before device reports no motion",
 		"valueSize": 2,
 		"minValue": 0,
@@ -401,12 +412,14 @@
 	},
 	"delay_limit_detection": {
 		"label": "Limit Detection Delay Time",
-		"description": "Defines the delay before motor power is read after a relay switches ON. Allowable range: 0, 3-50.",
+		"description": "Defines the delay before motor power is read after a relay switches ON.",
 		"unit": "0.1 seconds",
 		"valueSize": 1,
-		"minValue": 0,
-		"maxValue": 50,
 		"defaultValue": 3,
+		"allowed": [
+			{ "value": 0 },
+			{ "range": [3, 50] }
+		],
 		"options": [
 			{
 				"label": "Automatic time",
@@ -416,13 +429,15 @@
 	},
 	"max_moving_time": {
 		"label": "Shutter Max Moving Time",
-		"description": "Defines the maximum time the motor can move before stopping. Allowable range: 1-32000, 65000",
+		"description": "Defines the maximum time the motor can move before stopping.",
 		"unit": "seconds",
 		"valueSize": 2,
-		"minValue": 1,
-		"maxValue": 65000,
 		"defaultValue": 120,
 		"unsigned": true,
+		"allowed": [
+			{ "range": [1, 32000] },
+			{ "value": 65000 }
+		],
 		"options": [
 			{
 				"label": "unlimited time",

package/config/devices/0x046a/WB04V.json

@@ -273,6 +273,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Level Alarm Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -282,6 +283,7 @@
 		},
 		{
 			"#": "14",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -291,6 +293,7 @@
 		},
 		{
 			"#": "15",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Change Report Threshold",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x046a/WM25L.json

@@ -170,6 +170,7 @@
 		},
 		{
 			"#": "8",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Level Alarm Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -179,6 +180,7 @@
 		},
 		{
 			"#": "9",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -188,6 +190,7 @@
 		},
 		{
 			"#": "10",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Change Report Threshold",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x4118/tsm02.json

@@ -30,16 +30,13 @@
 	"paramInformation": [
 		{
 			"#": "2",
+			"$import": "~/templates/master_template.json#basic_set_value",
 			"label": "Basic Set Level",
-			"description": "Allowable range: 0-99, 255",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 255,
-			"unsigned": true
+			"defaultValue": 255
 		},
 		{
 			"#": "3",
+			"$purpose": "motion_sensitivity",
 			"label": "PIR Sensitivity",
 			"valueSize": 1,
 			"minValue": 0,
@@ -72,6 +69,7 @@
 		},
 		{
 			"#": "8",
+			"$purpose": "motion_retrigger_interval",
 			"label": "PIR Re-Detect Interval Time",
 			"valueSize": 1,
 			"minValue": 3,
@@ -104,6 +102,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Auto Report Illumination Time",
 			"valueSize": 1,
 			"minValue": 1,
@@ -112,6 +111,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Auto Report Temperature Time",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/0x5254/zdm-80.json

@@ -73,6 +73,7 @@
 		},
 		{
 			"#": "18",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Dimmer Level Control",
 			"valueSize": 1,
 			"minValue": 2,
@@ -81,6 +82,7 @@
 		},
 		{
 			"#": "19",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Dimmer Level Control",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/0x5254/zds-210na.json

@@ -46,6 +46,7 @@
 		},
 		{
 			"#": "18",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Dimmer Level Control",
 			"valueSize": 1,
 			"unit": "%",
@@ -55,6 +56,7 @@
 		},
 		{
 			"#": "19",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Dimmer Level Control",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x5254/zts-110.json

@@ -146,6 +146,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "calibration.temperature",
 			"label": "Sensor Temperature Calibration",
 			"valueSize": 1,
 			"minValue": -10,

package/config/devices/0x5254/zxt-800.json

@@ -72,6 +72,7 @@
 		},
 		{
 			"#": "30",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Change Reporting Threshold",
 			"description": "1 °F = 0.5 °C",
 			"valueSize": 1,
@@ -146,6 +147,7 @@
 		},
 		{
 			"#": "37",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Calibration",
 			"description": "1 °F = 0.5 °C",
 			"valueSize": 1,
@@ -178,6 +180,7 @@
 		},
 		{
 			"#": "53",
+			"$purpose": "calibration.humidity",
 			"label": "Humidity Offset",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/templates/honeywell_template.json

@@ -669,6 +669,7 @@
 		"$import": "~/templates/master_template.json#base_enable_disable"
 	},
 	"temperature_offset": {
+		"$purpose": "calibration.temperature",
 		"label": "Temperature Offset",
 		"valueSize": 1,
 		"minValue": -3,
@@ -707,6 +708,7 @@
 		]
 	},
 	"humidity_offset": {
+		"$purpose": "calibration.humidity",
 		"label": "Humidity Offset",
 		"valueSize": 1,
 		"minValue": -12,

package/config/devices/templates/master_template.json

@@ -63,6 +63,28 @@
 			}
 		]
 	},
+	"basic_set_value": {
+		// Template meant for all parameters that affect a
+		// Basic Set value sent by the device, with no
+		// special values.
+		// The default value needs to be set per device/parameter
+		"valueSize": 1,
+		"unsigned": true,
+		"allowed": [
+			{ "range": [0, 99] },
+			{ "value": 255 }
+		],
+		"options": [
+			{
+				"label": "Off",
+				"value": 0
+			},
+			{
+				"label": "On / Previous state",
+				"value": 255
+			}
+		]
+	},
 	"base_options_nounit": {
 		// This template is meant to be used for all parameters that
 		// allow selection of predefined options without manual entry
@@ -229,6 +251,7 @@
 	},
 	"dimming_speed_1-99_seconds": {
 		"$import": "#base_1-99_nounit",
+		"$purpose": "dimming_duration",
 		"label": "Dimming Speed",
 		"unit": "seconds",
 		"defaultValue": 5
@@ -239,31 +262,37 @@
 	},
 	"minimum_dim_level_0-99": {
 		"$import": "#base_0-99_nounit",
+		"$purpose": "minimum_brightness",
 		"label": "Minimum Dim Level",
 		"defaultValue": 1
 	},
 	"minimum_dim_level_1-99": {
 		"$import": "#base_1-99_nounit",
+		"$purpose": "minimum_brightness",
 		"label": "Minimum Dim Level",
 		"defaultValue": 1
 	},
 	"maximum_dim_level_0-99": {
 		"$import": "#base_0-99_nounit",
+		"$purpose": "maximum_brightness",
 		"label": "Maximum Dim Level",
 		"defaultValue": 99
 	},
 	"maximum_dim_level_0-100": {
 		"$import": "#base_0-100_nounit",
+		"$purpose": "maximum_brightness",
 		"label": "Maximum Dim Level",
 		"defaultValue": 100
 	},
 	"maximum_dim_level_1-99": {
 		"$import": "#base_1-99_nounit",
+		"$purpose": "maximum_brightness",
 		"label": "Maximum Dim Level",
 		"defaultValue": 99
 	},
 	"maximum_dim_level_1-100": {
 		"$import": "#base_1-100_nounit",
+		"$purpose": "maximum_brightness",
 		"label": "Maximum Dim Level",
 		"defaultValue": 100
 	},
@@ -279,9 +308,11 @@
 	},
 	"orientation": {
 		"$import": "#base_enable_disable",
+		"$purpose": "orientation",
 		"label": "Inverted Orientation"
 	},
 	"orientation_momentary": {
+		"$purpose": "orientation.momentary",
 		"label": "Inverted Orientation",
 		"valueSize": 1,
 		"defaultValue": 0,
@@ -403,6 +434,7 @@
 		]
 	},
 	"state_after_power_failure_off_on_prev": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 2,
@@ -423,6 +455,7 @@
 		]
 	},
 	"state_after_power_failure_off_prev_on": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 1,
@@ -443,6 +476,7 @@
 		]
 	},
 	"state_after_power_failure_prev_off_on": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 0,
@@ -463,6 +497,7 @@
 		]
 	},
 	"state_after_power_failure_prev_on_off": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 0,
@@ -483,6 +518,7 @@
 		]
 	},
 	"state_after_power_failure_off_prev": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 1,
@@ -499,6 +535,7 @@
 		]
 	},
 	"state_after_power_failure_prev_off": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 0,
@@ -515,6 +552,7 @@
 		]
 	},
 	"state_after_power_failure_prev_on_off_schedule": {
+		"$purpose": "state_after_power_failure",
 		"label": "State After Power Failure",
 		"valueSize": 1,
 		"defaultValue": 3,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "15.20.0",
+  "version": "15.21.0",
   "description": "zwave-js: configuration files",
   "keywords": [],
   "publishConfig": {
@@ -79,8 +79,8 @@
     "test:dirty": "tsx ../maintenance/src/resolveDirtyTests.ts --run"
   },
   "dependencies": {
-    "@zwave-js/core": "15.20.0",
-    "@zwave-js/shared": "15.20.0",
+    "@zwave-js/core": "15.21.0",
+    "@zwave-js/shared": "15.21.0",
     "alcalzone-shared": "^5.0.0",
     "ansi-colors": "^4.1.3",
     "eslint": "^9.39.2",
@@ -97,19 +97,19 @@
     "@types/json-logic-js": "^2.0.8",
     "@types/node": "^20.19.23",
     "@types/semver": "^7.7.1",
-    "@types/sinon": "^17.0.4",
+    "@types/sinon": "^21.0.0",
     "@types/xml2js": "^0.4.14",
     "@types/yargs": "^17.0.34",
-    "@zwave-js/maintenance": "15.20.0",
+    "@zwave-js/maintenance": "15.21.0",
     "comment-json": "^4.3.0",
     "del-cli": "^7.0.0",
     "es-main": "^1.4.0",
     "js-levenshtein": "^1.1.6",
     "ky": "^1.8.1",
-    "sinon": "^21.0.0",
+    "sinon": "^21.0.1",
     "tsx": "^4.20.5",
     "typescript": "5.9.3",
-    "vitest": "^4.0.0",
+    "vitest": "^4.0.18",
     "xml2js": "^0.6.2",
     "yargs": "^18.0.0"
   }