@zwave-js/config 15.20.0 → 15.21.0

package/config/devices/0x027a/zen57.json

@@ -0,0 +1,96 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZEN57",
+	"description": "240V XS Relay",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0321"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always off",
+					"value": 0
+				},
+				{
+					"label": "On when load is on",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "2",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "3",
+			"$import": "templates/zooz_template.json#association_reports_binary"
+		},
+		{
+			"#": "4",
+			"$import": "templates/zooz_template.json#enable_scene_control",
+			"defaultValue": 1
+		},
+		{
+			"#": "5",
+			"$import": "templates/zooz_template.json#external_switch_type_0-10",
+			"description": "Some of these values have special behavior. Check the official device manual for specifics.",
+			"defaultValue": 0
+		},
+		{
+			"#": "6",
+			"$import": "templates/zooz_template.json#local_programming_inverted"
+		},
+		{
+			"#": "7",
+			"$import": "templates/zooz_template.json#auto_off_timer_5x",
+			"maxValue": 2678400
+		},
+		{
+			"#": "8",
+			"$import": "templates/zooz_template.json#auto_on_timer_5x",
+			"maxValue": 2678400
+		},
+		{
+			"#": "9",
+			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
+		},
+		{
+			"#": "10",
+			"$import": "templates/zooz_template.json#relay_type_behavior"
+		},
+		{
+			"#": "11",
+			"$import": "templates/zooz_template.json#input_trigger"
+		},
+		{
+			"#": "12",
+			"$import": "templates/zooz_template.json#zen5x_external_switch_multiple_click"
+		},
+		{
+			"#": "13",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Reversed Reports for Input",
+			"description": "Reverse the reported values for your selected input type. See manual for details."
+		}
+	],
+	"metadata": {
+		"inclusion": "Click the Z-Wave button 3 times quickly. The LED indicator will blink green while processing. It will turn solid green for 2 seconds if successful or solid red for 2 seconds if inclusion fails.",
+		"exclusion": "Click the Z-Wave button 3 times quickly. The LED indicator will blink green while processing. It will turn solid green for 2 seconds if successful or solid red for 2 seconds if exclusion fails.",
+		"reset": "Click the Z-Wave button once and immediately after, press and hold the button for 15 seconds. The LED indicator will flash during the process and turn red for 3 seconds to confirm successful reset.",
+		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-z-wave-long-range-240v-xs-relay-zen57-manual.pdf"
+	}
+}

package/config/devices/0x027a/zen71.json

@@ -131,6 +131,19 @@
 			"#": "17",
 			"$if": "firmwareVersion >= 2.0",
 			"$import": "templates/zooz_template.json#local_programming"
+		},
+		{
+			"#": "20",
+			"$if": "firmwareVersion >= 3.60 && firmwareVersion < 10.0",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Scene Control Multi-Tap",
+			"description": "When disabled, only single taps report via central scene.",
+			"defaultValue": 0
+		},
+		{
+			"#": "21",
+			"$if": "firmwareVersion >= 3.60 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#led_indicator_multi_color"
 		}
 	],
 	"compat": {

package/config/devices/0x027a/zen72.json

@@ -211,6 +211,24 @@
 			"$if": "firmwareVersion >= 3.50 && firmwareVersion < 10.0",
 			"$import": "templates/zooz_template.json#custom_brightness",
 			"label": "Custom Brightness Level (Z-Wave Control)"
+		},
+		{
+			"#": "35",
+			"$if": "firmwareVersion >= 3.60 && firmwareVersion < 10.0",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Scene Control Multi-Tap",
+			"description": "When disabled, only single taps report via central scene.",
+			"defaultValue": 0
+		},
+		{
+			"#": "36",
+			"$if": "firmwareVersion >= 3.60 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#led_indicator_multi_color"
+		},
+		{
+			"#": "37",
+			"$if": "firmwareVersion >= 3.60 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#gamma_factor"
 		}
 	],
 	"compat": {

package/config/devices/0x027a/zen77.json

@@ -184,6 +184,40 @@
 			"#": "30",
 			"$if": "firmwareVersion >= 10.20 || firmwareVersion >= 2.10 && firmwareVersion < 10.0",
 			"$import": "templates/zooz_template.json#local_dimming_speed_group_3_and_4"
+		},
+		{
+			"#": "31",
+			"$if": "firmwareVersion >= 4.50 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#enable_scene_control_3way"
+		},
+		{
+			"#": "33",
+			"$if": "firmwareVersion >= 4.50 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#on_off_switch_mode"
+		},
+		{
+			"#": "34",
+			"$if": "firmwareVersion >= 4.60 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#custom_brightness",
+			"label": "Custom Brightness Level (Z-Wave Control)"
+		},
+		{
+			"#": "35",
+			"$if": "firmwareVersion >= 4.70 && firmwareVersion < 10.0",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Scene Control Multi-Tap",
+			"description": "When disabled, only single taps report via central scene.",
+			"defaultValue": 0
+		},
+		{
+			"#": "36",
+			"$if": "firmwareVersion >= 4.70 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#gamma_factor"
+		},
+		{
+			"#": "37",
+			"$if": "firmwareVersion >= 4.70 && firmwareVersion < 10.0",
+			"$import": "templates/zooz_template.json#led_indicator_multi_color"
 		}
 	],
 	"compat": {

package/config/devices/0x027a/zen78.json

@@ -106,6 +106,7 @@
 		},
 		{
 			"#": "4",
+			"$purpose": "reporting_threshold.power",
 			"label": "Power (W) Report Threshold",
 			"valueSize": 2,
 			"unit": "W",
@@ -122,6 +123,7 @@
 		},
 		{
 			"#": "5",
+			"$purpose": "reporting_interval.power",
 			"label": "Power (W) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -137,6 +139,7 @@
 		},
 		{
 			"#": "6",
+			"$purpose": "reporting_interval.energy",
 			"label": "Energy (kWh) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -152,6 +155,7 @@
 		},
 		{
 			"#": "7",
+			"$purpose": "reporting_threshold.voltage",
 			"label": "Voltage Report Threshold",
 			"valueSize": 1,
 			"unit": "V",
@@ -168,6 +172,7 @@
 		},
 		{
 			"#": "8",
+			"$purpose": "reporting_interval.voltage",
 			"label": "Voltage Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -183,6 +188,7 @@
 		},
 		{
 			"#": "9",
+			"$purpose": "reporting_threshold.current",
 			"label": "Current (A) Report Threshold",
 			"valueSize": 2,
 			"unit": "0.001 A",
@@ -199,6 +205,7 @@
 		},
 		{
 			"#": "10",
+			"$purpose": "reporting_interval.current",
 			"label": "Current (A) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -309,6 +316,7 @@
 		},
 		{
 			"#": "19",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Reporting Threshold",
 			"valueSize": 1,
 			"unit": "0.1 °F",
@@ -324,6 +332,7 @@
 		},
 		{
 			"#": "20",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Reporting Interval",
 			"valueSize": 4,
 			"unit": "seconds",

package/config/devices/0x027a/zse09.json

@@ -16,6 +16,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "motion_sensitivity.inverted",
 			"label": "Motion Sensitivity",
 			"description": "8 = high; 255 = low",
 			"valueSize": 1,
@@ -26,6 +27,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Re-Trigger Interval",
 			"valueSize": 2,
 			"unit": "seconds",
@@ -65,6 +67,7 @@
 		},
 		{
 			"#": "7",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Light Polling Interval",
 			"description": "Interval between light level reporting",
 			"valueSize": 2,
@@ -95,6 +98,7 @@
 		{
 			"#": "9",
 			"$import": "~/templates/master_template.json#base_0-255_nounit",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Light Reporting Threshold",
 			"unit": "lux",
 			"defaultValue": 255,

package/config/devices/0x027a/zse11.json

@@ -23,6 +23,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "motion_clear_delay",
 			"label": "Motion Detection: Timeout",
 			"valueSize": 2,
 			"unit": "seconds",
@@ -131,6 +132,7 @@
 		{
 			"#": "173",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Reporting Interval",
 			"valueSize": 2,
 			"unit": "seconds",
@@ -148,6 +150,7 @@
 		{
 			"#": "174",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Humidity Reporting Interval",
 			"valueSize": 2,
 			"unit": "seconds",
@@ -165,6 +168,7 @@
 		{
 			"#": "175",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Brightness Reporting Interval",
 			"valueSize": 2,
 			"unit": "seconds",
@@ -182,6 +186,7 @@
 		{
 			"#": "182",
 			"$import": "~/templates/master_template.json#base_0-99_nounit",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Reporting Change Threshold",
 			"unit": "%",
 			"defaultValue": 0,
@@ -194,6 +199,7 @@
 		},
 		{
 			"#": "183",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Reporting Change Threshold",
 			"valueSize": 2,
 			"unit": "°F",
@@ -203,6 +209,7 @@
 		},
 		{
 			"#": "184",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Reporting Change Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -218,6 +225,7 @@
 		},
 		{
 			"#": "185",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Brightness Reporting Change Threshold",
 			"valueSize": 2,
 			"unit": "lux",
@@ -234,6 +242,7 @@
 		{
 			"#": "201",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Calibration",
 			"description": "Value is offset by 100: 0 = -10 °F, 50 = -5 °F, 100 = 0 °F, 150 = +5 °F, 200 = +10 °F",
 			"valueSize": 1,
@@ -246,6 +255,7 @@
 		{
 			"#": "202",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "calibration.humidity",
 			"label": "Humidity Calibration",
 			"description": "Value is offset by 100: 0 = -10%, 50 = -5%, 100 = 0%, 150 = +5%, 200 = +10%",
 			"valueSize": 1,
@@ -258,6 +268,7 @@
 		{
 			"#": "203",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "calibration.brightness",
 			"label": "Brightness Calibration",
 			"description": "Value is offset by 100: 0 = -10 lux, 50 = -5 lux, 100 = 0 lux, 150 = +5 lux, 200 = +10 lux",
 			"valueSize": 1,

package/config/devices/0x027a/zse29.json

@@ -44,6 +44,7 @@
 		{
 			"#": "3",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "motion_sensitivity",
 			"label": "Motion Sensitivity",
 			"description": "Adjust motion sensitivity where 10 is the most sensitive setting.",
 			"valueSize": 1,
@@ -75,6 +76,7 @@
 		{
 			"#": "5",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "motion_clear_delay",
 			"label": "Re-Trigger Interval",
 			"description": "Delay before the sensor reports no motion after detecting the last motion activity (add 5 seconds to entered value).",
 			"valueSize": 2,
@@ -92,6 +94,7 @@
 		{
 			"#": "6",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Lux Reporting Frequency",
 			"valueSize": 2,
 			"unit": "minutes",

package/config/devices/0x027a/zse40.json

@@ -50,6 +50,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Reporting Threshold",
 			"valueSize": 1,
 			"unit": "0.1 °",
@@ -59,6 +60,7 @@
 		},
 		{
 			"#": "3",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Reporting Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -68,6 +70,7 @@
 		},
 		{
 			"#": "4",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Brightness Reporting Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -80,6 +83,7 @@
 			// Initial release of HW version 1.0
 			"$if": "firmwareVersion >= 16.9 && firmwareVersion < 17.9",
 			"$import": "~/templates/master_template.json#base_1-255_nounit",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Re-Trigger Interval",
 			"unit": "minutes",
 			"defaultValue": 3
@@ -88,6 +92,7 @@
 			"#": "5",
 			// Update 17.9 changed the unit to seconds
 			"$if": "firmwareVersion >= 17.9 && firmwareVersion < 24.16",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Re-Trigger Interval",
 			"valueSize": 1,
 			"unit": "seconds",
@@ -97,6 +102,7 @@
 		},
 		{
 			"#": "5",
+			"$purpose": "motion_retrigger_interval",
 			// Update 24.16 changed the range to 15-255, this also applies to HW version 1.0
 			"label": "Re-Trigger Interval",
 			"valueSize": 1,
@@ -110,6 +116,7 @@
 			"#": "6",
 			// HW version 1.0, first release has default value 3
 			"$if": "firmwareVersion >= 16.9 && firmwareVersion < 17.9",
+			"$purpose": "motion_sensitivity",
 			"label": "Motion Sensor Sensitivity",
 			"description": "Adjust sensitivity of the motion sensor.",
 			"valueSize": 1,
@@ -150,6 +157,7 @@
 			"#": "6",
 			// All other releases have default value 4
 			"$if": "firmwareVersion < 16.9 || firmwareVersion >= 17.9",
+			"$purpose": "motion_sensitivity",
 			"label": "Motion Sensor Sensitivity",
 			"description": "Adjust sensitivity of the motion sensor.",
 			"valueSize": 1,
@@ -247,6 +255,7 @@
 			"#": "9",
 			// Added with the switch to the new firmware versioning scheme
 			"$if": "firmwareVersion >= 1.10 && firmwareVersion < 16.9",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Offset",
 			"description": "Set the reporting offset on your temperature sensor. 0=-10, 100=0, 200=+10",
 			"valueSize": 1,
@@ -260,6 +269,7 @@
 			"#": "10",
 			// Added with the switch to the new firmware versioning scheme
 			"$if": "firmwareVersion >= 1.10 && firmwareVersion < 16.9",
+			"$purpose": "calibration.humidity",
 			"label": "Humidity Offset",
 			"description": "Set the reporting offset on your humidity sensor. 0=-10%, 100=0%, 200=+10%",
 			"valueSize": 1,

package/config/devices/0x027a/zse42.json

@@ -47,6 +47,7 @@
 		},
 		{
 			"#": "5",
+			"$if": "firmwareVersion < 2.20",
 			"label": "Group 2: Basic Set Commands",
 			"valueSize": 1,
 			"defaultValue": 1,
@@ -57,12 +58,42 @@
 					"value": 0
 				},
 				{
-					"label": "0xff (On) when water detected; 0x00 (Off) when cleared",
+					"label": "0x00 (Off) when water detected; 0xff (On) when cleared",
 					"value": 1
 				},
+				{
+					"label": "0xff (On) when water detected; 0x00 (Off) when cleared",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "5",
+			"$if": "firmwareVersion >= 2.20",
+			"label": "Group 2: Basic Set Commands",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
 				{
 					"label": "0x00 (Off) when water detected; 0xff (On) when cleared",
+					"value": 1
+				},
+				{
+					"label": "0xff (On) when water detected; 0x00 (Off) when cleared",
 					"value": 2
+				},
+				{
+					"label": "0xff (On) when water cleared; No report when detected",
+					"value": 3
+				},
+				{
+					"label": "0x00 (Off) when water detected; No report when cleared",
+					"value": 4
 				}
 			]
 		}

package/config/devices/0x027a/zse44.json

@@ -63,6 +63,7 @@
 		{
 			"#": "3",
 			"$if": "firmwareVersion < 2.0",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Report Threshold",
 			"valueSize": 1,
 			"unit": "0.1 °F/C",
@@ -73,6 +74,7 @@
 		{
 			"#": "3",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Report Threshold",
 			"valueSize": 1,
 			"unit": "0.1 °F/C",
@@ -89,6 +91,7 @@
 		{
 			"#": "4",
 			"$if": "firmwareVersion < 2.0",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Report Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -99,6 +102,7 @@
 		{
 			"#": "4",
 			"$if": "firmwareVersion >= 2.0",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Report Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -350,6 +354,7 @@
 		},
 		{
 			"#": "14",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Offset",
 			"description": "0=-10, 100=0, 200=+10",
 			"valueSize": 1,
@@ -361,6 +366,7 @@
 		},
 		{
 			"#": "15",
+			"$purpose": "calibration.humidity",
 			"label": "Humidity Offset",
 			"description": "0=-10, 100=0, 200=+10",
 			"valueSize": 1,
@@ -372,6 +378,7 @@
 		},
 		{
 			"#": "16",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Reporting Interval",
 			"valueSize": 2,
 			"unit": "minutes",
@@ -387,6 +394,7 @@
 		},
 		{
 			"#": "17",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Humidity Reporting Interval",
 			"valueSize": 2,
 			"unit": "minutes",

package/config/devices/0x027a/zse50.json

@@ -235,6 +235,7 @@
 		},
 		{
 			"#": "15",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Reporting Interval",
 			"valueSize": 1,
 			"unit": "hours",

package/config/devices/0x027a/zse70_800lr.json

@@ -28,6 +28,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "motion_sensitivity",
 			"label": "Motion Sensitivity",
 			"description": "1 = least sensitive, 8 = most sensitive",
 			"valueSize": 1,
@@ -43,6 +44,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "motion_clear_delay",
 			"label": "Motion Clear Delay",
 			"description": "How long to wait after the last motion detection before reporting no motion",
 			"valueSize": 2,
@@ -123,6 +125,7 @@
 		},
 		{
 			"#": "7",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Threshold",
 			"description": "Below this level a low battery alert will be sent.",
 			"valueSize": 1,
@@ -149,6 +152,7 @@
 		},
 		{
 			"#": "11",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Change Report Threshold",
 			"description": "How much the battery level must change before sending a new report",
 			"valueSize": 1,
@@ -181,6 +185,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Change Report Threshold",
 			"description": "How much the temperature must change before sending a new report",
 			"valueSize": 1,
@@ -198,6 +203,7 @@
 		},
 		{
 			"#": "14",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Calibration",
 			"description": "Value is offset by 100: 0 = -10 °F, 50 = -5 °F, 100 = 0 °F, 150 = +5 °F, 200 = +10 °F",
 			"valueSize": 1,
@@ -209,6 +215,7 @@
 		},
 		{
 			"#": "17",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Report Interval",
 			"description": "The minimum interval in which the sensor will send temperature updates, even if the change threshold is not met.",
 			"valueSize": 2,
@@ -242,6 +249,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Brightness Change Report Threshold",
 			"description": "How much the brightness must change before sending a new report",
 			"valueSize": 2,
@@ -258,6 +266,7 @@
 		},
 		{
 			"#": "15",
+			"$purpose": "calibration.brightness",
 			"label": "Brightness Calibration",
 			"description": "Value is offset by 100: 0 = -100 lux, 50 = -50 lux, 100 = 0 lux, 150 = +50 lux, 200 = +100 lux",
 			"valueSize": 1,
@@ -285,6 +294,7 @@
 		},
 		{
 			"#": "18",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Brightness Report Interval",
 			"description": "The minimum interval in which the sensor will send brightness updates, even if the change threshold is not met.",
 			"valueSize": 2,

package/config/devices/0x028c/pwly-7828-a1.json

@@ -111,6 +111,7 @@
 		},
 		{
 			"#": "5",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Calibration",
 			"valueSize": 1,
 			"unit": "°F",