@zwave-js/config 15.20.0 → 15.21.0

package/config/devices/0x0384/ha-zw-5sab.json

@@ -28,6 +28,7 @@
 	"paramInformation": [
 		{
 			"#": "10",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Power Level",
 			"valueSize": 1,
 			"unit": "%",
@@ -46,6 +47,7 @@
 		},
 		{
 			"#": "101",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Reporting Interval",
 			"valueSize": 4,
 			"unit": "minutes",
@@ -61,6 +63,7 @@
 		},
 		{
 			"#": "102",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Humidity Reporting Interval",
 			"valueSize": 4,
 			"unit": "minutes",
@@ -76,6 +79,7 @@
 		},
 		{
 			"#": "103",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Luminance Reporting Interval",
 			"valueSize": 4,
 			"unit": "minutes",
@@ -91,6 +95,7 @@
 		},
 		{
 			"#": "104",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Level Reporting Interval",
 			"valueSize": 4,
 			"unit": "minutes",
@@ -123,6 +128,7 @@
 		},
 		{
 			"#": "111",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Temperature Change Threshold",
 			"valueSize": 2,
 			"unit": "0.1 °C",
@@ -132,6 +138,7 @@
 		},
 		{
 			"#": "112",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Change Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -141,6 +148,7 @@
 		},
 		{
 			"#": "113",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Luminance Change Threshold",
 			"valueSize": 2,
 			"unit": "lux",
@@ -151,6 +159,7 @@
 		},
 		{
 			"#": "114",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Level Change Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -160,6 +169,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "motion_sensitivity",
 			"label": "Motion Sensor Sensitivity",
 			"description": "1 = lowest sensitivity, 10 = highest sensitivity",
 			"valueSize": 1,
@@ -175,6 +185,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Motion Re-Trigger Wait Time",
 			"valueSize": 2,
 			"unit": "seconds",

package/config/devices/0x0384/ha-zw-5sf.json

@@ -28,6 +28,7 @@
 	"paramInformation": [
 		{
 			"#": "10",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Report Threshold",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x039a/INT-SMDWD-01.json

@@ -77,6 +77,7 @@
 		},
 		{
 			"#": "5",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Report Interval",
 			"valueSize": 2,
 			"unit": "minutes",

package/config/devices/0x039a/INT-SMMD-N1.json

@@ -16,6 +16,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "motion_sensitivity.inverted",
 			"label": "Motion Sensitivity",
 			"description": "Higher values = lower sensitivity and lower range.",
 			"valueSize": 1,
@@ -77,6 +78,7 @@
 		},
 		{
 			"#": "4",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Motion Blind Time",
 			"description": "The amount of time the sensor will not report motion after it has reported motion.",
 			"valueSize": 1,
@@ -157,6 +159,7 @@
 		},
 		{
 			"#": "6",
+			"$purpose": "motion_clear_delay",
 			"label": "Motion Clear Time",
 			"description": "How long the sensor will wait before reporting no motion",
 			"valueSize": 2,
@@ -231,6 +234,7 @@
 		},
 		{
 			"#": "99",
+			"$purpose": "calibration.brightness",
 			"label": "Brightness Calibration Factor",
 			"valueSize": 2,
 			"unit": "1/1000",

package/config/devices/0x039a/nas-wr01z.json

@@ -80,6 +80,7 @@
 		},
 		{
 			"#": "6",
+			"$purpose": "reporting_threshold.power",
 			"label": "Power Report Threshold",
 			"description": "Change in power consumption that triggers a report",
 			"valueSize": 1,

package/config/devices/0x0403/shbw10000.json

@@ -16,6 +16,7 @@
 	"paramInformation": [
 		{
 			"#": "10",
+			"$purpose": "reporting_threshold.low_battery",
 			"label": "Low Battery Alarm Level",
 			"valueSize": 1,
 			"unit": "%",
@@ -25,6 +26,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "motion_sensitivity",
 			"label": "PIR Sensitivity",
 			"valueSize": 1,
 			"minValue": 0,
@@ -39,9 +41,10 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "motion_retrigger_interval",
 			"label": "Waiting Time Between Two PIR Triggers",
 			"valueSize": 2,
-			"unit": "seconda",
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 15300,
 			"defaultValue": 30
@@ -96,6 +99,7 @@
 		},
 		{
 			"#": "101",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Temperature Report Time",
 			"valueSize": 4,
 			"minValue": 0,
@@ -110,6 +114,7 @@
 		},
 		{
 			"#": "102",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Humidity Report Time",
 			"valueSize": 4,
 			"minValue": 0,
@@ -124,6 +129,7 @@
 		},
 		{
 			"#": "103",
+			"$purpose": "reporting_interval.brightness",
 			"label": "Brightness Report Time",
 			"valueSize": 4,
 			"minValue": 0,
@@ -132,6 +138,7 @@
 		},
 		{
 			"#": "104",
+			"$purpose": "reporting_interval.battery",
 			"label": "Battery Report Time",
 			"valueSize": 4,
 			"minValue": 0,
@@ -171,6 +178,7 @@
 		},
 		{
 			"#": "112",
+			"$purpose": "reporting_threshold.humidity",
 			"label": "Humidity Report Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -180,6 +188,7 @@
 		},
 		{
 			"#": "113",
+			"$purpose": "reporting_threshold.brightness",
 			"label": "Brightness Report Threshold",
 			"valueSize": 2,
 			"unit": "Lux",
@@ -190,6 +199,7 @@
 		},
 		{
 			"#": "114",
+			"$purpose": "reporting_threshold.battery",
 			"label": "Battery Report Threshold",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x0403/shha10000.json

@@ -65,6 +65,7 @@
 		},
 		{
 			"#": "16",
+			"$purpose": "reporting_threshold.power",
 			"label": "Threshold Power Report: Wattage",
 			"description": "Minimum change in wattage as watt value for a meter report to be sent",
 			"valueSize": 2,
@@ -82,6 +83,7 @@
 		},
 		{
 			"#": "17",
+			"$purpose": "reporting_threshold.power",
 			"label": "Threshold Power Report: Percentage",
 			"description": "Minimum change in wattage as percent for a meter report to be sent",
 			"valueSize": 1,
@@ -115,6 +117,7 @@
 		},
 		{
 			"#": "101",
+			"$purpose": "reporting_interval.power",
 			"label": "Power (Watt) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",

package/config/devices/0x041b/39446_zw3107.json

@@ -82,6 +82,7 @@
 		},
 		{
 			"#": "8",
+			"$purpose": "ramp_rate.zwave",
 			"label": "Dim Rate Timing (From Z-Wave Controller)",
 			"description": "Timing of steps",
 			"valueSize": 2,
@@ -101,6 +102,7 @@
 		},
 		{
 			"#": "10",
+			"$purpose": "ramp_rate.manual",
 			"label": "Dim Rate Timing (When Manually Controlled)",
 			"description": "Timing of steps",
 			"valueSize": 2,

package/config/devices/0x041b/39458_zw3010.json

@@ -111,6 +111,7 @@
 		},
 		{
 			"#": "30",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Dim Threshold",
 			"valueSize": 1,
 			"unit": "%",
@@ -120,6 +121,7 @@
 		},
 		{
 			"#": "31",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Brightness Threshold",
 			"valueSize": 1,
 			"unit": "%",

package/config/devices/0x0431/ecodim.json

@@ -78,6 +78,7 @@
 		},
 		{
 			"#": "3",
+			"$purpose": "dimming_duration",
 			"label": "Default Dimming Speed",
 			"description": "Configure the default dimming speed: 0 = Instantly, 1 = Fast, 100 = Slow",
 			"valueSize": 1,

package/config/devices/0x0433/q-light_puck.json

@@ -39,6 +39,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Brightness Level",
 			"description": "Set the desired value from 1 to 98% for the minimum dim level that the dimmer is restricted to, the dimmer will not go lower than the value set here.",
 			"valueSize": 1,
@@ -49,6 +50,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Brightness Level",
 			"description": "Set the desired value from 2 to 99% for the maximum dim level that the dimmer is restricted to, the dimmer will not go higher than the value set here.",
 			"valueSize": 1,
@@ -163,6 +165,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "timer.auto_off",
 			"label": "Auto-Off Timer",
 			"valueSize": 2,
 			"unit": "seconds",

package/config/devices/0x0433/q-light_zerodim.json

@@ -31,6 +31,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Brightness Level",
 			"description": "Set the desired value from 1 to 98% for the minimum dim level that the dimmer is restricted to, the dimmer will not go lower than the value set here.",
 			"valueSize": 1,
@@ -41,6 +42,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Brightness Level",
 			"description": "Set the desired value from 2 to 99% for the maximum dim level that the dimmer is restricted to; the dimmer will not go higher than the value set here.",
 			"valueSize": 1,
@@ -104,6 +106,7 @@
 		},
 		{
 			"#": "9",
+			"$purpose": "timer.auto_off",
 			"label": "Auto-Off Timer",
 			"valueSize": 2,
 			"unit": "seconds",

package/config/devices/0x0433/q-light_zerodim_2pol.json

@@ -31,6 +31,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
+			"$purpose": "minimum_brightness",
 			"label": "Minimum Brightness Level",
 			"description": "Set the desired value from 1 to 98% for the minimum dim level that the dimmer is restricted to, the dimmer will not go lower than the value set here.",
 			"valueSize": 1,
@@ -41,6 +42,7 @@
 		},
 		{
 			"#": "2",
+			"$purpose": "maximum_brightness",
 			"label": "Maximum Brightness Level",
 			"description": "Set the desired value from 2 to 99% for the maximum dim level that the dimmer is restricted to; the dimmer will not go higher than the value set here.",
 			"valueSize": 1,
@@ -104,6 +106,7 @@
 		},
 		{
 			"#": "9",
+			"$purpose": "timer.auto_off",
 			"label": "Auto-Off Timer",
 			"valueSize": 2,
 			"unit": "seconds",

package/config/devices/0x0438/4512725.json

@@ -46,6 +46,7 @@
 		},
 		{
 			"#": "9",
+			"$purpose": "calibration.temperature",
 			"label": "Temperature Calibration",
 			"valueSize": 1,
 			"unit": "0.1 °C",
@@ -56,11 +57,12 @@
 		{
 			"#": "10",
 			"label": "Overheat Protection",
-			"description": "Allowable range: 30-60",
 			"valueSize": 1,
 			"unit": "°C",
-			"minValue": 0,
-			"maxValue": 60,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [30, 60] }
+			],
 			"defaultValue": 36,
 			"options": [
 				{
@@ -71,12 +73,14 @@
 		},
 		{
 			"#": "11",
+			"$purpose": "reporting_threshold.temperature",
 			"label": "Automatic Reporting: Temperature Change Threshold",
-			"description": "Allowable range: 2-50",
 			"valueSize": 1,
 			"unit": "0.1 °C",
-			"minValue": 0,
-			"maxValue": 50,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [2, 50] }
+			],
 			"defaultValue": 5,
 			"options": [
 				{
@@ -87,12 +91,14 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "reporting_interval.temperature",
 			"label": "Automatic Reporting: Temperature Reporting Interval",
-			"description": "Allowable range: 10-65535",
 			"valueSize": 2,
 			"unit": "seconds",
-			"minValue": 0,
-			"maxValue": 65535,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [10, 65535] }
+			],
 			"defaultValue": 300,
 			"unsigned": true,
 			"options": [
@@ -104,6 +110,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "reporting_threshold.power",
 			"label": "Automatic Reporting: Power Change Threshold",
 			"valueSize": 1,
 			"unit": "W",
@@ -120,6 +127,7 @@
 		},
 		{
 			"#": "14",
+			"$purpose": "reporting_threshold.voltage",
 			"label": "Automatic Reporting: Voltage Change Threshold",
 			"valueSize": 1,
 			"unit": "V",
@@ -136,6 +144,7 @@
 		},
 		{
 			"#": "15",
+			"$purpose": "reporting_threshold.current",
 			"label": "Automatic Reporting: Current Change Threshold",
 			"valueSize": 1,
 			"unit": "0.1 A",
@@ -153,11 +162,12 @@
 		{
 			"#": "17",
 			"label": "Automatic Reporting: Reporting Interval",
-			"description": "Allowable range: 60-2678400",
 			"valueSize": 4,
 			"unit": "seconds",
-			"minValue": 0,
-			"maxValue": 2678400,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [60, 2678400] }
+			],
 			"defaultValue": 600,
 			"options": [
 				{
@@ -181,11 +191,12 @@
 		{
 			"#": "20",
 			"label": "Overcurrent Protection",
-			"description": "Allowable range: 10-16",
 			"valueSize": 1,
 			"unit": "A",
-			"minValue": 0,
-			"maxValue": 16,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [10, 16] }
+			],
 			"defaultValue": 16,
 			"options": [
 				{

package/config/devices/0x0438/4512744.json

@@ -28,11 +28,12 @@
 		{
 			"#": "2",
 			"label": "Overcurrent Protection",
-			"description": "Allowable range: 5-16",
 			"valueSize": 1,
 			"unit": "A",
-			"minValue": 0,
-			"maxValue": 16,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [5, 16] }
+			],
 			"defaultValue": 16,
 			"options": [
 				{
@@ -69,11 +70,12 @@
 		{
 			"#": "6",
 			"label": "Overheat Protection",
-			"description": "Allowable range: 20-60",
 			"valueSize": 1,
 			"unit": "°C",
-			"minValue": 0,
-			"maxValue": 60,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [20, 60] }
+			],
 			"defaultValue": 45,
 			"options": [
 				{
@@ -197,11 +199,12 @@
 		{
 			"#": "16",
 			"label": "Automatic Reporting: Temperature Change Threshold",
-			"description": "Allowable range: 2-10",
 			"valueSize": 1,
 			"unit": "0.1 °C",
-			"minValue": 0,
-			"maxValue": 10,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [2, 10] }
+			],
 			"defaultValue": 2,
 			"options": [
 				{
@@ -212,12 +215,14 @@
 		},
 		{
 			"#": "17",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Automatic Reporting: Humidity Reporting Interval",
-			"description": "Allowable range: 30-28800",
 			"valueSize": 2,
 			"unit": "seconds",
-			"minValue": 0,
-			"maxValue": 28800,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [30, 28800] }
+			],
 			"defaultValue": 300,
 			"options": [
 				{

package/config/devices/0x0438/4512745.json

@@ -28,11 +28,12 @@
 		{
 			"#": "2",
 			"label": "Overcurrent Protection",
-			"description": "Allowable range: 5-16",
 			"valueSize": 1,
 			"unit": "A",
-			"minValue": 0,
-			"maxValue": 16,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [5, 16] }
+			],
 			"defaultValue": 16,
 			"options": [
 				{
@@ -69,11 +70,12 @@
 		{
 			"#": "6",
 			"label": "Overheat Protection",
-			"description": "Allowable range: 20-60",
 			"valueSize": 1,
 			"unit": "°C",
-			"minValue": 0,
-			"maxValue": 60,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [20, 60] }
+			],
 			"defaultValue": 45,
 			"options": [
 				{
@@ -197,11 +199,12 @@
 		{
 			"#": "16",
 			"label": "Automatic Reporting: Temperature Change Threshold",
-			"description": "Allowable range: 2-10",
 			"valueSize": 1,
 			"unit": "0.1 °C",
-			"minValue": 0,
-			"maxValue": 10,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [2, 10] }
+			],
 			"defaultValue": 2,
 			"options": [
 				{
@@ -212,12 +215,14 @@
 		},
 		{
 			"#": "17",
+			"$purpose": "reporting_interval.humidity",
 			"label": "Automatic Reporting: Humidity Reporting Interval",
-			"description": "Allowable range: 30-28800",
 			"valueSize": 2,
 			"unit": "seconds",
-			"minValue": 0,
-			"maxValue": 28800,
+			"allowed": [
+				{ "value": 0 },
+				{ "range": [30, 28800] }
+			],
 			"defaultValue": 300,
 			"options": [
 				{

package/config/devices/0x0438/4512746.json

@@ -94,6 +94,7 @@
 		},
 		{
 			"#": "10",
+			"$purpose": "reporting_threshold.power",
 			"label": "Power Change Report Threshold",
 			"valueSize": 1,
 			"unit": "W",
@@ -110,6 +111,7 @@
 		},
 		{
 			"#": "11",
+			"$purpose": "reporting_threshold.current",
 			"label": "Current Change Report Threshold",
 			"valueSize": 1,
 			"unit": "0.1A",
@@ -126,6 +128,7 @@
 		},
 		{
 			"#": "12",
+			"$purpose": "reporting_threshold.voltage",
 			"label": "Voltage Change Report Threshold",
 			"valueSize": 1,
 			"unit": "V",
@@ -142,6 +145,7 @@
 		},
 		{
 			"#": "13",
+			"$purpose": "reporting_interval.energy",
 			"label": "Energy Reporting Interval",
 			"valueSize": 4,
 			"unit": "seconds",