@zwave-js/config 12.5.4 → 12.5.6

package/config/devices/0x011a/zwn-bpc_0.0-5.9.json

@@ -34,6 +34,6 @@
 	],
 	"compat": {
 		// This device uses Basic Set to report the motion sensor status
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x0131/zp3102.json

@@ -52,6 +52,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x013c/psr03-a.json

@@ -72,6 +72,6 @@
 	},
 	"compat": {
 		// The device uses Basic Set to indicate pressed buttons in Lighting Control Mode
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x013c/psr03-b.json

@@ -126,6 +126,6 @@
 	},
 	"compat": {
 		// The device uses Basic Set to indicate pressed buttons in Lighting Control Mode
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x014f/wadwaz-1.json

@@ -21,7 +21,7 @@
 		}
 	},
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	},
 	"metadata": {
 		"inclusion": "With your Controller in Inclusion mode, depress the internal program switch for 1 second then release.",

package/config/devices/0x014f/wapirz-1.json

@@ -33,6 +33,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x014f/wo15z.json

@@ -20,7 +20,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Put the controller in to INCLUDE mode. Press the button on the unit once.",

package/config/devices/0x014f/wt00z-1.json

@@ -134,6 +134,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x014f/zwn-bpc.json

@@ -34,6 +34,6 @@
 	],
 	"compat": {
 		// This device uses Basic Set to report the motion sensor status
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x0166/sw-zcs-1.json

@@ -55,6 +55,6 @@
 	],
 	"compat": {
 		// The device only sends Binary Switch Reports as broadcast (not routed) and Basic Sets
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x016a/ft100.json

@@ -37,7 +37,6 @@
 		}
 	},
 	// Fantem is an OEM for Aeotec
-	// Fantem is an OEM for Aeotec
 	"paramInformation": [
 		{
 			"#": "2",
@@ -533,7 +532,7 @@
 	],
 	"compat": {
 		// In the default configuration this device sends Basic CC Sets instead of Binary Sensor Reports
-		"enableBasicSetMapping": true
+		"mapBasicSet": "Binary Sensor"
 	},
 	"metadata": {
 		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product",

package/config/devices/0x016a/ft111.json

@@ -475,7 +475,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",

package/config/devices/0x019b/tf016_tf021.json

@@ -227,7 +227,7 @@
 	],
 	"compat": {
 		// The device reports its relay state via the Basic CC
-		"disableBasicMapping": true
+		"mapBasicReport": false
 	},
 	"metadata": {
 		"inclusion": "To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds.\nThe display will show OFF. Press Right (down) 4 times till you see Con in the display.\nNow start adding the device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately 2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion fails, Err (error) will appear.\nLeave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings",

package/config/devices/0x019b/z-temp2.json

@@ -166,5 +166,16 @@
 			"label": "Invert Output",
 			"valueSize": 2
 		}
-	]
+	],
+	"compat": {
+		"$if": "firmwareVersion === 1.2.1",
+		// Firmware version 1.2.1 has broken Supervision support
+		"commandClasses": {
+			"remove": {
+				"Supervision": {
+					"endpoints": "*"
+				}
+			}
+		}
+	}
 }

package/config/devices/0x0234/zdb5100.json

@@ -717,6 +717,6 @@
 	},
 	"compat": {
 		// Starting in Firmware 1.6, the device no longer uses Central Scene for Pressed / Released, only Basic CC
-		"disableBasicMapping": true
+		"mapBasicReport": false
 	}
 }

package/config/devices/0x0293/hc-tb-zw.json

@@ -27,7 +27,7 @@
 		}
 	},
 	"compat": {
-		"disableBasicMapping": true
+		"mapBasicReport": false
 	},
 	"metadata": {
 		"inclusion": "1. Put the controller into INCLUSION mode. Follow the instructions\nprovided by the controller manufacturer.\n\n2. Press and hold the config button for more than 2 seconds. ALL indicator lights will blink 3 times. At this point release the config button, the device will start the inclusion process",

package/config/devices/0x041b/39446_zw3107.json

@@ -130,7 +130,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\ndimmer. Repeat as necessary to add the dimmer to\nthe network.\nYou have complete control",

package/config/devices/0x041b/39449_zw4106.json

@@ -55,7 +55,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch. Repeat as necessary to add the switch to\nthe network",

package/config/devices/0x041b/39453_zw4203.json

@@ -76,7 +76,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch to add it in the network.\n3. The controller’s app will indicate if it has discovered the\nswitch. If prompted by the controller to enter the S2\nsecurity code, refer to the QR code/security number on\nthe side of the box or the QR code label on the product\n(see Figure 1). Enter the 5-digit code",

package/config/devices/0x041b/39455_zw4008.json

@@ -75,7 +75,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart switch (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",

package/config/devices/0x041b/39456_zw1002.json

@@ -55,7 +55,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a\ndevice to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the\nprogram button. Repeat as necessary to add the smart outlet to\nthe network.\nYou have complete control",

package/config/devices/0x041b/39458_zw3010.json

@@ -139,7 +139,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "This dimmer is SmartStart enabled. If your controller supports SmartStart inclusion, this dimmer can be added into the Z-Wave network by following the instructions for your controller or hub and scanning the Z-Wave QR Code on the front or on the package when instructed. No further action is required, and the dimmer will be added automatically within 10 minutes of being powered up while in range Z-Wave network.",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "12.5.4",
+  "version": "12.5.6",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"