@zwave-js/config 12.5.4 → 12.5.6

package/config/devices/0x000c/hs-ps100.json

@@ -0,0 +1,114 @@
+{
+	"manufacturer": "HomeSeer Technologies",
+	"manufacturerId": "0x000c",
+	"label": "HS-PS100",
+	"description": "Z-Wave Presence Sensor",
+	"devices": [
+		{
+			"productType": "0x0204",
+			"productId": "0x0002"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Off Delay After Motion",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 10,
+			"maxValue": 3600,
+			"defaultValue": 10
+		},
+		{
+			"#": "2",
+			"label": "Distance Report Interval",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 2,
+			"maxValue": 600,
+			"defaultValue": 10
+		},
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Bluetooth",
+			"description": "After changing this setting, the unit will need to be power cycled before it will take effect."
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Motion LED",
+			"description": "Enable / Disable the LED flash when motion is sensed (red) and times out (green).",
+			"defaultValue": 1
+		},
+		{
+			"#": "6",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 0-75cm (0-2.4ft) Sensitivity",
+			"defaultValue": 50
+		},
+		{
+			"#": "7",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 75-150cm (2.4-4.9ft) Sensitivity",
+			"defaultValue": 50
+		},
+		{
+			"#": "8",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 150-225cm (4.9-7.3ft) Sensitivity",
+			"defaultValue": 50
+		},
+		{
+			"#": "9",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 225-300cm (7.3-9.8ft) Sensitivity",
+			"defaultValue": 50
+		},
+		{
+			"#": "10",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 300-375cm (9.8-12.3ft) Sensitivity",
+			"defaultValue": 90
+		},
+		{
+			"#": "11",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 375-450cm (12.3-14.7ft) Sensitivity",
+			"defaultValue": 90
+		},
+		{
+			"#": "12",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 450-525cm (14.7-17.2ft) Sensitivity",
+			"defaultValue": 90
+		},
+		{
+			"#": "13",
+			"$import": "templates/homeseer_template.json#range_sensitivity",
+			"label": "Range 525-600cm (17.2-19.6ft) Sensitivity",
+			"defaultValue": 90
+		}
+	],
+	"metadata": {
+		"inclusion": "1) Set the main controller in inclusion mode (see the controller’s manual).\n2) Press and release the sensor’s Z-Wave network button.",
+		"exclusion": "1) Set the main controller in exclusion mode (see the controller’s manual).\n2) Press and release the sensor’s Z-Wave network button.",
+		"reset": "1) Power on the device\n2) Press and hold the Z-Wave network button for 30 seconds.",
+		"manual": "https://docs.homeseer.com/products/ps100-g8-user-guide"
+	}
+}

package/config/devices/0x000c/hs-wd100.json

@@ -58,6 +58,6 @@
 		"inclusion": "1. Turn the connected lights ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"exclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"reset": "Please use this procedure only in the event that the network primary controller is lost or otherwise inoperable.\n\nAll Configuration Parameters can all be restored to their factory default settings by using your primary controller to delete/reset the device. \nTo manually reset, tap the ON button twice quickly and then tap the OFF button twice quickly. Repeat the procedure to restore the settings to the factory default.",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2563/HS-WD100-Manual-v1_1a.pdf"
+		"manual": "https://homeseer.com/guides/HS-WD100-Manual-7.pdf"
 	}
 }

package/config/devices/0x000c/hs-wd200.json

@@ -142,6 +142,6 @@
 		"inclusion": "1. Turn the connected lights ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"exclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"reset": "Please use this procedure only in the event that the network primary controller is lost or otherwise inoperable.\n\nAll Configuration Parameters can all be restored to their factory default settings by using your primary controller to delete/reset the device. \nTo manually reset: (1) Turn dimmer on by tapping the top of the paddle once. (2) Quickly tap top of the paddle 3 times. (3) Quickly tap bottom of paddle 3 times. (4) If light turns off and then on again, dimmer is reset. If not, repeat manual reset.",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2676/HS-WD200-Manual-4.pdf"
+		"manual": "https://homeseer.com/guides/HS-WD200-Manual.pdf"
 	}
 }

package/config/devices/0x000c/hs-ws200.json

@@ -51,6 +51,6 @@
 		"inclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"exclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
 		"reset": "Please use this procedure only in the event that the network primary controller is lost or otherwise inoperable.\n\nAll Configuration Parameters can all be restored to their factory\ndefault settings by using your primary controller to delete/reset\nthe device. To manually reset, tap the ON button twice quickly and then tap the OFF button twice quickly. Repeat the procedure to restore the settings to the factory default.",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2675/HS-WS200-Manual-v4.pdf"
+		"manual": "https://homeseer.com/guides/HS-WS200-Manual.pdf"
 	}
 }

package/config/devices/0x000c/hs-wv100.json

@@ -25,6 +25,6 @@
 		"inclusion": "How to Add the HS-WV100+ Z-Wave Valve Controller to your Z-Wave Controller\n- Plug the wall cube power adapter (included) into the receptacle on the bottom of the HS-WV100+ Z-Wave Valve Controller marked “3.6 VDC”. Plug the wall cube into a 110 VAC outlet. This provides power to the HS-WV100+ Z-Wave Valve Controller.\n- Configure the Z-Wave Controller to Add a device. \n- When the Z-Wave Controller is ready to add a device, it will display a message like “waiting to add device. Press Add button on the device”\n- The Add/Remove button is located on the side of the HS-WV100+ Z-Wave Valve Controller. Press the Add/Remove button.\n- The Z-Wave Controller will acknowledge that the HS-WV100+ Z-Wave Valve Controller had been added to the Z-Wave network.\n- Your HS-WV100+ Z-Wave Valve Controllerler is ready to use",
 		"exclusion": "How to Remove the HS-WV100+ Z-Wave Valve Controllerler to your Z-Wave Controller\n\n- Plug the wall cube power adapter (included) into the receptacle on the bottom of the HS-WV100+ Z-Wave Valve Controller marked “3.6 VDC”. Plug the wall cube into a 110 VAC outlet. This provides power to the HS-WV100+ Z-Wave Valve Controller.\n- Configure the Z-Wave Controller to Remove a device. \n- When the Z-Wave Controller is ready to Remove a device, it will display a message like “waiting to remove device. Press remove button on the device”\n- The Add/Remove button is located on the side of the HS-WV100+ Z-Wave Valve Controller. Press the Add/Remove button. \n- The Z-Wave Controller will acknowledge that the HS-WV100+ Z-Wave Valve Controller had been removed from the Z-Wave network.\n- Your HS-WV100+ Z-Wave Valve Controller is removed form this controller",
 		"reset": "How to reset the HS-WV100+ Z-Wave Valve Controller.\n- To reset the HS-WV100+ Z-Wave Valve Controller Z-Wave radio and routing table, press and hold the Add/Remove button located on the side of the HS-WV100+ Z-Wave Valve Control for 15 seconds. \n\nUse this procedure only when the network primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1845/HS-WV100-Manual.pdf"
+		"manual": "https://docs.homeseer.com/products/hs-wv100-user-guide"
 	}
 }

package/config/devices/0x000c/hs-wx300.json

@@ -221,6 +221,6 @@
 		"inclusion": "1. Put your Z-Wave controller into inclusion (or exclusion) mode. Consult your controller’s manual if you’re unsure how to do this. \n2. In rapid succession, tap the bottom paddle 2 times, then press & hold the bottom paddle for 3 seconds (tap-tap-press & hold). This will initiate the inclusion (or exclusion) process. \nNote: The switch will default to dimmer mode after Z-Wave exclusion.",
 		"exclusion": "1. Put your Z-Wave controller into inclusion (or exclusion) mode. Consult your controller’s manual if you’re unsure how to do this. \n2. In rapid succession, tap the bottom paddle 2 times, then press & hold the bottom paddle for 3 seconds (tap-tap-press & hold). This will initiate the inclusion (or exclusion) process. \nNote: The switch will default to dimmer mode after Z-Wave exclusion.",
 		"reset": "To be used only in the event that the network primary controller is lost or otherwise inoperable.\n\n1. In rapid succession, tap the top paddle 3 times, then tap the bottom paddle 3 times. If all LEDs flash white 5 times, factory reset was successful. If not, repeat this procedure.\nNote: As this must be done very quickly, we recommend using 2 fingers for this operation; one on each paddle!\nNote: The switch will default to 3-wire mode and dimmer mode after factory reset",
-		"manual": "https://docs.homeseer.com/products/lighting/hs-wx300/hs-wx300-user-guide"
+		"manual": "https://docs.homeseer.com/products/hs-wx300-r2-user-guide"
 	}
 }

package/config/devices/0x000c/templates/homeseer_template.json

@@ -99,7 +99,8 @@
 	},
 	"enable_shock_alarm": {
 		"$import": "~/templates/master_template.json#base_enable_disable",
-		"label": "Enable / Disable Shock Alarm"
+		"label": "Enable / Disable Shock Alarm",
+		"defaultValue": 1
 	},
 	"dimming_step": {
 		"$import": "~/templates/master_template.json#dimming_timing",
@@ -283,5 +284,10 @@
 				"value": 1
 			}
 		]
+	},
+	"range_sensitivity": {
+		"$import": "~/templates/master_template.json#base_0-100_nounit",
+		"label": "Range Sensitivity",
+		"description": "Higher values increase sensitivity"
 	}
 }

package/config/devices/0x001a/rf9501.json

@@ -110,6 +110,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x001a/rf9540-n_0.0_1.1.json

@@ -172,6 +172,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x001a/rf9540-n_1.2.json

@@ -180,6 +180,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x001a/rf9542.json

@@ -122,6 +122,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x001a/rfwc5.json

@@ -89,6 +89,6 @@
 	],
 	"compat": {
 		// Basic CC is required to react to Scene Off commands
-		"disableBasicMapping": true
+		"mapBasicReport": false
 	}
 }

package/config/devices/0x0039/39336_39443_zw3104.json

@@ -145,7 +145,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add\nthe smart dimmer to the Z-Wave network.\n2. Once the controller is ready to add your smart dimmer, single\npress and release the manual/program button on the smart\ndimmer to add it in the network.\nPlease reference the controller/gateway’s manual for instructions",

package/config/devices/0x0039/39339_39346_zw3107.json

@@ -131,7 +131,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add\nthe smart dimmer to the Z-Wave network.\n2. Once the controller is ready to add your smart dimmer, single\npress and release the manual/program button on the smart\ndimmer to add it in the network.\nPlease reference the controller/gateway’s manual for instructions",

package/config/devices/0x0039/39342_39449_zw4106.json

@@ -55,7 +55,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Adding your device to a Z-Wave network:\n1. Follow the instructions for your Z-Wave certified controller to\ninclude the device to the Z-Wave network.\n2. Once the controller is ready to include your smart switch,\nsingle press and release the manual/program button on the\nsmart switch to include it in the network.\nNow you have complete control to turn your lamp ON/OFF\naccording to groups, scenes, schedules and interactive\nautomations programmed by your controller.\nIf your Z-Wave certified controller features Remote Access,\nyou can now control your lighting from your mobile devices",

package/config/devices/0x0039/39348_39455_zw4005.json

@@ -89,8 +89,8 @@
 		}
 	],
 	"compat": {
-		"disableBasicMapping": true,
-		"treatBasicSetAsEvent": true
+		"mapBasicReport": false,
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the wireless smart switch(rocker) to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance",

package/config/devices/0x0039/39348_39455_zw4008.json

@@ -77,7 +77,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart switch (rocker) to add it in the network.\n\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",

package/config/devices/0x0039/39351_39458_zw3005.json

@@ -131,7 +131,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to\ninclude a device to the Z-Wave network.\n2. Once the controller is ready to add your device,\npress and release the top or bottom of the wireless smart\nswitch (rocker) to add it in the network.\nPlease reference the controller’s manual for instructions",

package/config/devices/0x0039/39351_39458_zw3010.json

@@ -143,7 +143,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart dimmer (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",

package/config/devices/0x0039/39354_39461_zw4003.json

@@ -86,7 +86,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up on the toggle.\n\nA. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product.\n\nNow you have complete control to turn your fixture ON/OFF according to groups, scenes, schedules and interactive automations programmed by your controller. If your Z-Wave certified controller features remote access, you can control your fixture from your mobile devices",

package/config/devices/0x0039/39354_39461_zw4009.json

@@ -86,7 +86,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up on the toggle.\n\nA. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product.\n\nNow you have complete control to turn your fixture ON/OFF according to groups, scenes, schedules and interactive automations programmed by your controller. If your Z-Wave certified controller features remote access, you can control your fixture from your mobile devices",

package/config/devices/0x0039/39357_39464_zw3004.json

@@ -134,7 +134,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to\ninclude a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press\nand release the top or bottom of the wireless smart dimmer\n(rocker) to include it in the network",

package/config/devices/0x0039/39357_39464_zw3011.json

@@ -126,7 +126,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up and release the toggle.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",

package/config/devices/0x0039/39358_39465_zw4002.json

@@ -50,7 +50,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0039/39363_39470_zw4203.json

@@ -72,7 +72,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network. \n\n2. Once the controller is ready to add your device, press and the manual/program button on the smart switch.\n\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the box or the QR code label on the product. Enter the 5-digit code",

package/config/devices/0x0060/hac01.json

@@ -44,7 +44,7 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true,
+		"mapBasicSet": "auto",
 		// The device supports Binary Switch CC, despite the Version query telling otherwise
 		"commandClasses": {
 			"add": {

package/config/devices/0x0060/hsp02.json

@@ -104,6 +104,6 @@
 	],
 	"compat": {
 		// The device is a Binary Sensor, but uses Basic Sets to report its status
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x0060/sm103.json

@@ -48,6 +48,6 @@
 	],
 	"compat": {
 		// The device is a Binary Sensor, but uses Basic Sets to report its status
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x0063/12729_zw3004.json

@@ -61,6 +61,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/12730_zw4002.json

@@ -40,7 +40,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/14287_zw4002.json

@@ -42,7 +42,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/14291_zw4005.json

@@ -45,6 +45,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14292_zw4003.json

@@ -40,6 +40,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14294_zw3005.json

@@ -65,6 +65,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14295_zw3004.json

@@ -61,6 +61,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14296_zw3011.json

@@ -60,6 +60,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14298_zw4203.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/14299_zw3006.json

@@ -48,6 +48,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14311_zw4201.json

@@ -31,7 +31,7 @@
 		}
 	},
 	"compat": {
-		"disableBasicMapping": true
+		"mapBasicReport": false
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to\ninclude the smart switch to the Z-Wave network.\n2. Once the controller is ready to include your outdoor smart\nswitch, single press and release the manual/program\nbutton on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch\nhas been included, refresh the Z-Wave network to\noptimize performance",

package/config/devices/0x0063/14313_zw1001.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified\ncontroller to include a device to the Z-wave network.\n2. Once the controller is ready to include your device, press and\nrelease the Program Button to include it in the network.\n3. Once your controller has confirmed that the device has been\nincluded, refresh the Z-wave network to optimize performance",

package/config/devices/0x0063/14314_zw4002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/14319_zw4003.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. \n2. Once the controller is ready to include your device, press up and release on the toggle to include it in the network. \n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.",

package/config/devices/0x0063/14320_zw4003.json

@@ -44,6 +44,6 @@
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2054/Binder2.pdf"
 	},
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/14322_zw3004.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Adding your device to a Z-wave network:\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press up and release on the\ntoggle to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh\nthe Z-wave network to optimize performance.\nPlease reference the controller’s manual for instructions.\nNow you have complete control to turn your fixture ON/OFF or dim\naccording to groups, scenes, schedules and interactive automations\nprogrammed by your controller.\nIf your Z-wave certified controller features Remote Access, you can now control\nyour fixture from your mobile devices",

package/config/devices/0x0063/14325_zw4203.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add the smart switch to the Z-Wave network.\n2. Once the controller is ready to add your outdoor smart switch, press and release the manual/program button on the smart switch.\n3. The controller’s app will indicate if it has discovered the switch. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product (see Figure 1). Enter the 5-digit code",

package/config/devices/0x0063/14326_zw3006.json

@@ -65,7 +65,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Adding your device to a Z-wave network\n1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wave\nnetwork.\n2. Once the controller is ready to include your device, press and release the top or bottom of the\nwireless smart switch(rocker) to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-wave network\nto optimize performance.\nPlease reference the controller’s manual for instructions.\nNow you have complete control to turn your fixture ON/OFFaccording to groups, scenes, schedules\nand interactive automations programmed by your controller.\nIf your Z-wave certified controller features Remote Access, you can now control your fixture from\nyour mobile devices",

package/config/devices/0x0063/26931_zw4006.json

@@ -71,6 +71,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/26932_zw3008.json

@@ -105,7 +105,7 @@
 	// Add compat flag to re-enable basic command events to replicate central scene functionality.
 	// Allows user to detect switch button presses as events when zwave controller is added to Group 2 or 3.
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2108/26933%20EnFrSp%20QSG%20v1.3%20and%20Parameters.pdf"

package/config/devices/0x0063/26933_zw3008.json

@@ -105,7 +105,7 @@
 	// Add compat flag to re-enable basic command events to replicate central scene functionality.
 	// Allows user to detect switch button presses as events when zwave controller is added to Group 2 or 3.
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2108/26933%20EnFrSp%20QSG%20v1.3%20and%20Parameters.pdf"