@zwave-js/config 12.5.4 → 12.5.6

package/config/devices/0x0063/28166_zw3104.json

@@ -66,7 +66,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",

package/config/devices/0x0063/28170_zw3105.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",

package/config/devices/0x0063/28172_zw4104.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",

package/config/devices/0x0063/28173_zw4104.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",

package/config/devices/0x0063/28174_zw3106.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Adding your device to a Z-wave network:\n1. Follow the instructions for your Z-wave certified controller to\ninclude the smart dimmer to the Z-wave network.\n2. Once the controller is ready to include your smart dimmer,\nsingle press and release the manual/program button on the\nsmart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart dimmer\nhas been included, refresh the Z-wave network to optimize\nperformance.\nPlease reference the controller/gateway’s manual\nfor instructions.\nNow you have complete control to turn your lamp ON/OFF or set\nDim levels according to groups, scenes, schedules and interactive\nautomations programmed by your controller.\nIf your Z-wave certified controller features Remote Access, you can now control your lighting from your mobile devices",

package/config/devices/0x0063/28176_zw4105.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-wave certified controller to\nadd the device to the Z-wave network.\n2. Once the controller is ready to add your smart switch,\nsingle press and release the manual/program button on the\nsmart switch to add it in the network.\n3. Once your controller has confirmed that the smart switch\nhas been added, refresh the Z-wave network to optimize\nperformance.",

package/config/devices/0x0063/39348_54890_54891_zw4008.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart switch (rocker)",

package/config/devices/0x0063/39351_zw3010.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x0063/39354_54912_zw4009.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up on the toggle",

package/config/devices/0x0063/43072_zw4008dv.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/43074_zw4009dv.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/43105_zw3010dv.json

@@ -57,7 +57,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up and release the top or bottom of the rocker.\n3. The controller’s app will indicate if it has discovered the switch. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product (see Figure 1). Enter the 5-digit code",

package/config/devices/0x0063/43107_zw3011dv.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up and release the toggle.\n3. The controller’s app will indicate if it discovers the switch. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product (see Figure 1). Enter the 5-digit code",

package/config/devices/0x0063/45604_zw4201.json

@@ -30,6 +30,6 @@
 		}
 	},
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/45609_zw4001.json

@@ -42,6 +42,6 @@
 	],
 	"compat": {
 		// Enable double-tap support
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/45655_zw4001.json

@@ -42,6 +42,6 @@
 	],
 	"compat": {
 		// Enable double-tap support
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/45658_zw4201.json

@@ -30,6 +30,6 @@
 		}
 	},
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0063/45743_zw4002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/46201_zw4008.json

@@ -42,7 +42,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/46202_zw4009.json

@@ -45,7 +45,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press up and release the toggle.",

package/config/devices/0x0063/46203_zw3010.json

@@ -65,7 +65,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart dimmer (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",

package/config/devices/0x0063/46204_zw3011.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release\nthe top or bottom of the wireless smart dimmer (rocker)",

package/config/devices/0x0063/46562_zw4008.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/46563_zw4009.json

@@ -41,7 +41,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",

package/config/devices/0x0063/46564_zw3010.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release\nthe top or bottom of the wireless smart dimmer (rocker)",

package/config/devices/0x0063/46565_zw3011.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release\nthe top or bottom of the wireless smart dimmer (rocker)",

package/config/devices/0x0063/52252_zw3012.json

@@ -69,7 +69,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x0063/53829_zw5313.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified hub to add a device to the Z-Wave network.\n2. Once the hub is ready to add your device, press and hold either button for three seconds.\n3. The LED will flash two times when the remote sends add notification (NIF).\n4. The LED will keep lighting up for one minute if inclusion is successful.5. Following the instructions for your Z-Wave certified hub, assign actions for each button press. An action can be many combinations of scenes, groups\nor events, and is greatly dependent on the hub capabilities.",

package/config/devices/0x0063/53831_zw5314.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified hub to add a device to the Z-Wave network.\n2. Once the hub is ready to add your device, press and hold either button for three seconds.\n3. The LED will flash two times when the remote sends add notification (NIF).\n4. The LED will keep lighting up for one minute if inclusion is successful.\n5. Following the instructions for your Z-Wave certified hub, assign actions for each button press. An action can be many combinations of scenes, groups or events, and is greatly dependent on the hub capabilities.",

package/config/devices/0x0063/55249_zw4106.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add the sensor in the Z-Wave network.\n2. Once the controller is ready to add your sensor, ensure battery is installed with the correct polarity in the sensor and the battery tab has\nbeen removed.\n3. Press and release the programming button (see Figure 2). This starts the manual add process. The red LED (see Figure 2) will begin to\nflash quickly as it begins the add process.\n4. The red LED will activate for 3 seconds to confirm the sensor has been added in the network.\n5. The controller’s app will indicate if it has discovered the sensor. If prompted by the controller to enter the S2 security code, refer to the QR\ncode/security number on the back of the box, or the QR code label on the product (see Figure 3). Enter the 5-digit code.\nNote: Your controller may need to be within 10ft. of the sensor to be added.\nUsing the controller, you can activate interactive automations when the sensor detects when a door or window is opened or closed.\nFunctions may vary depending on gateway or controller",

package/config/devices/0x0063/55250_zw4104.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add the smart switch to the Z-Wave network.\n2. Once the controller is ready to add your smart switch, press and release the manual/program button on the smart switch",

package/config/devices/0x0063/55251_zw3107.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your smart dimmer, single press and release the manual/program button on\nthe smart dimmer",

package/config/devices/0x0063/55252_zw3105.json

@@ -61,7 +61,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press the program button of the smart dimmer",

package/config/devices/0x0063/55256_zw1002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network. 2. Once the controller is ready to add your device, press and release the program button",

package/config/devices/0x0063/55257_zw1002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the program button",

package/config/devices/0x0063/55258_zw4002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/55259_zw4002.json

@@ -37,7 +37,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"commandClasses": {
 			"remove": {
 				"Supervision": {

package/config/devices/0x0063/56590_zw3012.json

@@ -69,7 +69,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x0063/58433_59344_zwa4011.json

@@ -73,7 +73,7 @@
 	],
 	"compat": {
 		// Enables Basic Set via Group 3 as an alternative way to detect double taps (instead of Central Scene)
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x0063/58438_59346_zwa3016.json

@@ -83,7 +83,7 @@
 	],
 	"compat": {
 		// Needed for double-tap support
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x0063/59368_zwa4012.json

@@ -70,7 +70,7 @@
 	],
 	"compat": {
 		// Needed for double-tap support
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",

package/config/devices/0x007a/506219.json

@@ -96,6 +96,6 @@
 	],
 	"compat": {
 		// The device uses Basic Set to control other devices
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x007a/5071xx.json

@@ -78,6 +78,6 @@
 	],
 	"compat": {
 		// The device uses Basic Set to control other devices
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0086/zw100.json

@@ -567,7 +567,7 @@
 	],
 	"compat": {
 		// In the default configuration this device sends Basic CC Sets instead of Binary Sensor Reports
-		"enableBasicSetMapping": true,
+		"mapBasicSet": "Binary Sensor",
 		// Querying some values can take a bit longer if certain reports are disabled
 		"reportTimeout": 2000
 	},

package/config/devices/0x0086/zw111.json

@@ -488,7 +488,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true,
+		"mapBasicSet": "event",
 		"treatMultilevelSwitchSetAsEvent": true
 	},
 	"metadata": {

package/config/devices/0x0086/zw116.json

@@ -437,7 +437,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",

package/config/devices/0x0086/zw132.json

@@ -510,7 +510,7 @@
 	"compat": {
 		"preserveRootApplicationCCValueIDs": true,
 		// The device can report S1/S2 switch operation via Basic Set to groups 3 and 4
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",

package/config/devices/0x0109/zd2102.json

@@ -33,6 +33,6 @@
 	},
 	"compat": {
 		// The device is a Binary Sensor, but uses Basic Sets to report its status
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x0109/zg8101.json

@@ -26,7 +26,7 @@
 		}
 	},
 	"compat": {
-		"enableBasicSetMapping": true,
+		"mapBasicSet": "auto",
 		// The device does not idle its own notifications
 		"forceNotificationIdleReset": true
 	},

package/config/devices/0x0109/zp3102.json

@@ -81,6 +81,6 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true
+		"mapBasicSet": "auto"
 	}
 }

package/config/devices/0x010f/fgbs001.json

@@ -311,7 +311,7 @@
 		}
 	],
 	"compat": {
-		"enableBasicSetMapping": true,
+		"mapBasicSet": "auto",
 		"commandClasses": {
 			"remove": {
 				// Alarm Sensor CC is reported as supported, but we either get no response

package/config/devices/0x010f/fgk101.json

@@ -655,11 +655,11 @@
 			"preserveRootApplicationCCValueIDs": true,
 
 			// The device is a Binary Sensor, but uses Basic Sets to report its status
-			"enableBasicSetMapping": true
+			"mapBasicSet": "auto"
 		},
 		{
 			// The device is a Binary Sensor, but uses Basic Sets to report its status
-			"enableBasicSetMapping": true
+			"mapBasicSet": "auto"
 		}
 	]
 }

package/config/devices/0x010f/fgwceu-201.json

@@ -78,7 +78,7 @@
 		{
 			"#": "150",
 			"label": "LED Frame: First Channel Color",
-			"valueSize": 1,
+			"valueSize": 2,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [

package/config/devices/0x0113/lfm-20.json

@@ -33,7 +33,7 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	},
 	"metadata": {
 		"inclusion": "Put your controller in INCLUDE mode, and double tap the button on the face of the device.",

package/config/devices/0x0113/lom15.json

@@ -14,6 +14,6 @@
 		"max": "255.255"
 	},
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0113/lpm-15.json

@@ -56,6 +56,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0113/lsm-15.json

@@ -52,6 +52,6 @@
 		}
 	],
 	"compat": {
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0118/tz35s_tz35d_tz55s_tz55d.json

@@ -100,6 +100,6 @@
 	],
 	"compat": {
 		// The right paddle sends its status via Basic Set commands
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0118/tz56.json

@@ -16,6 +16,6 @@
 	},
 	"compat": {
 		// The right paddle sends its status via Basic Set commands
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x0118/tz66d.json

@@ -181,6 +181,6 @@
 	],
 	"compat": {
 		// The right paddle sends its status via Basic Set commands
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }

package/config/devices/0x011a/zw15s.json

@@ -49,6 +49,6 @@
 	],
 	"compat": {
 		// Enable double-tap support
-		"treatBasicSetAsEvent": true
+		"mapBasicSet": "event"
 	}
 }